@misc{SchulzeBettBivouretal.2020,
  author    = {Schulze, Patricia S. C. and Bett, Alexander J. and Bivour, Martin and Caprioglio, Pietro and Gerspacher, Fabian M. and Kabakl{\i}, {\"O}zde Ş. and Richter, Armin and Stolterfoht, Martin and Zhang, Qinxin and Neher, Dieter and Hermle, Martin and Hillebrecht, Harald and Glunz, Stefan W. and Goldschmidt, Jan Christoph},
  title     = {25.1\% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {7},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52566},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525668},
  pages     = {12},
  year      = {2020},
  abstract  = {Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10\% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80\% and up to 25.1\% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3\% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30\% tandem efficiency in the near future.},
  language  = {en}
}
@article{SchulzeBettBivouretal.2020,
  author    = {Schulze, Patricia S. C. and Bett, Alexander J. and Bivour, Martin and Caprioglio, Pietro and Gerspacher, Fabian M. and Kabakl{\i}, {\"O}zde Ş. and Richter, Armin and Stolterfoht, Martin and Zhang, Qinxin and Neher, Dieter and Hermle, Martin and Hillebrecht, Harald and Glunz, Stefan W. and Goldschmidt, Jan Christoph},
  title     = {25.1\% high-efficiency monolithic perovskite silicon tandem solar cell with a high bandgap perovskite absorber},
  series = {Solar RRL},
  volume    = {4},
  journal   = {Solar RRL},
  number    = {7},
  publisher = {John Wiley \& Sons, Inc.},
  address   = {New Jersey},
  pages     = {10},
  year      = {2020},
  abstract  = {Monolithic perovskite silicon tandem solar cells can overcome the theoretical efficiency limit of silicon solar cells. This requires an optimum bandgap, high quantum efficiency, and high stability of the perovskite. Herein, a silicon heterojunction bottom cell is combined with a perovskite top cell, with an optimum bandgap of 1.68 eV in planar p-i-n tandem configuration. A methylammonium-free FA(0.75)Cs(0.25)Pb(I0.8Br0.2)(3) perovskite with high Cs content is investigated for improved stability. A 10\% molarity increase to 1.1 m of the perovskite precursor solution results in approximate to 75 nm thicker absorber layers and 0.7 mA cm(-2) higher short-circuit current density. With the optimized absorber, tandem devices reach a high fill factor of 80\% and up to 25.1\% certified efficiency. The unencapsulated tandem device shows an efficiency improvement of 2.3\% (absolute) over 5 months, showing the robustness of the absorber against degradation. Moreover, a photoluminescence quantum yield analysis reveals that with adapted charge transport materials and surface passivation, along with improved antireflection measures, the high bandgap perovskite absorber has the potential for 30\% tandem efficiency in the near future.},
  language  = {en}
}
@phdthesis{Ehrig2017,
  author    = {Ehrig, Sebastian},
  title     = {3D curvature and its role on tissue organization},
  school      = {Universit{\"a}t Potsdam},
  pages     = {132},
  year      = {2017},
  abstract  = {Shape change is a fundamental process occurring in biological tissues during embryonic development and regeneration of tissues and organs. This process is regulated by cells that are constrained within a complex environment of biochemical and physical cues. The spatial constraint due to geometry has a determining role on tissue mechanics and the spatial distribution of force patterns that, in turn, influences the organization of the tissue structure. An understanding of the underlying principles of tissue organization may have wide consequences for the understanding of healing processes and the development of organs and, as such, is of fundamental interest for the tissue engineering community. This thesis aims to further our understanding of how the collective behaviour of cells is influenced by the 3D geometry of the environment. Previous research studying the role of geometry on tissue growth has mainly focused either on flat surfaces or on substrates where at least one of the principal curvatures is zero. In the present work, tissue growth from MC3T3-E1 pre-osteoblasts was investigated on surfaces of controlled mean curvature. One key aspect of this thesis was the development of substrates of controlled mean curvature and their visualization in 3D. It was demonstrated that substrates of controlled mean curvature suitable for cell culture can be fabricated using liquid polymers and surface tension effects. Using these substrates, it was shown that the mean surface curvature has a strong impact on the rate of tissue growth and on the organization of the tissue structure. It was thereby not only demonstrated that the amount of tissue produced (i.e. growth rates) by the cells depends on the mean curvature of the substrate but also that the tissue surface behaves like a viscous fluid with an equilibrium shape governed by the Laplace-Young-law. It was observed that more tissue was formed on highly concave surfaces compared to flat or convex surfaces. Motivated by these observations, an analytical model was developed, where the rate of tissue growth is a function of the mean curvature, which could successfully describe the growth kinetics. This model was also able to reproduce the growth kinetics of previous experiments where tissues have been cultured in straight-sided prismatic pores. A second part of this thesis focuses on the tissue structure, which influences the mechanical properties of the mature bone tissue. Since the extracellular matrix is produced by the cells, the cell orientation has a strong impact on the direction of the tissue fibres. In addition, it was recently shown that some cell types exhibit collective alignment similar to liquid crystals. Based on this observation, a computational model of self-propelled active particles was developed to explore in an abstract manner how the collective behaviour of cells is influenced by 3D curvature. It was demonstrated that the 3D curvature has a strong impact on the self-organization of active particles and gives, therefore, first insights into the principles of self-organization of cells on curved surfaces.},
  language  = {en}
}
@misc{KubatovaHamannKubatetal.2019,
  author    = {Kubatova, Brankica and Hamann, Wolf-Rainer and Kubat, Jiri and Oskinova, Lida},
  title     = {3D Monte Carlo Radiative Transfer in Inhomogeneous Massive Star Winds},
  series = {Radiative signatures from the cosmos},
  volume    = {519},
  journal   = {Radiative signatures from the cosmos},
  publisher = {Astronomical soc pacific},
  address   = {San Fransisco},
  isbn      = {978-1-58381-925-8},
  issn      = {1050-3390},
  pages     = {209 -- 212},
  year      = {2019},
  abstract  = {Already for decades it has been known that the winds of massive stars are inhomogeneous (i.e. clumped). To properly model observed spectra of massive star winds it is necessary to incorporate the 3-D nature of clumping into radiative transfer calculations. In this paper we present our full 3-D Monte Carlo radiative transfer code for inhomogeneous expanding stellar winds. We use a set of parameters to describe dense as well as the rarefied wind components. At the same time, we account for non-monotonic velocity fields. We show how the 3-D density and velocity wind inhomogeneities strongly affect the resonance line formation. We also show how wind clumping can solve the discrepancy between P v and H alpha mass-loss rate diagnostics.},
  language  = {en}
}
@phdthesis{Schmoll2001,
  author    = {Schmoll, J{\"u}rgen},
  title     = {3D-Spektrofotometrie extragalaktischer Emissionslinienobjekte},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000372},
  school      = {Universit{\"a}t Potsdam},
  year      = {2001},
  abstract  = {Popul{\"a}rwissenschaftlicher Abstract: Bislang gibt es in der beobachtenden optischen Astronomie zwei verschiedene Herangehensweisen: Einerseits werden Objekte durch Kameras abbildend erfaßt, andererseits werden durch die wellenl{\"a}ngenabh{\"a}ngige Zerlegung ihres Lichtes Spektren gewonnen. Das Integral - Field - Verfahren ist eine relativ neue Technik, welche die genannten Beobachtungsmethoden vereint. Das Objektbild im Teleskopfokus wird in r{\"a}umlich zerlegt und jedes Ortselement einem gemeinsamen Spektrografen zugef{\"u}hrt. Hierdurch wird das Objekt nicht nur zweidimensional r{\"a}umlich erfaßt, sondern zus{\"a}tzlich die spektrale Kompenente als dritte Dimension erhalten, weswegen das Verfahren auch als 3D-Methode bezeichnet wird. Anschaulich kann man sich das Datenresultat als eine Abbildung vorstellen, in der jeder einzelne Bildpunkt nicht mehr nur einen Intensit{\"a}tswert enth{\"a}lt, sondern gleich ein ganzes Spektrum. Diese Technik erm{\"o}glicht es, ausgedehnte Objekte im Unterschied zu g{\"a}ngigen Spaltspektrografen komplett zu erfassen. Die besondere St{\"a}rke der Methode ist die M{\"o}glichkeit, die Hintergrundkontamination der unmittelbaren Umgebung des Objektes zu erfassen und in der Auswertung zu ber{\"u}cksichtigen. Durch diese F{\"a}higkeit erscheint die 3D-Methode pr{\"a}destiniert f{\"u}r den durch moderne Großteleskope erschlossenen Bereich der extragalaktischen Stellarastronomie. Die detaillierte Untersuchung aufgel{\"o}ster stellare Populationen in nahegelegenen Galaxien ist erst seit kurzer Zeit dank der Fortschritte mit modernen Grossteleskopen und fortschrittlicher Instrumentierung m{\"o}glich geworden. Wegen der Bedeutung f{\"u}r die Entstehung und Evolution von Galaxien werden diese Arbeiten zuk{\"u}nftig weiter an Bedeutung gewinnen. In der vorliegenden Arbeit wurde die Integral-Field-Spektroskopie an zwei planetarischen Nebeln in der n{\"a}chstgelegenen großen Spiralgalaxie M31 (NGC 224) getestet, deren Helligkeiten und Koordinaten aus einer Durchmusterung vorlagen. Hierzu wurden Beobachtungen mit dem MPFS-Instrument am russischen 6m - Teleskop in Selentschuk/Kaukasus sowie mit INTEGRAL/WYFFOS am englischen William-Herschel-Teleskop auf La Palma gewonnen. Ein {\"u}berraschendes Ergebnis war, daß eins der beiden Objekte falsch klassifiziert wurde. Sowohl die meßbare r{\"a}umliche Ausdehnung des Objektes als auch das spektrale Erscheinungsbild schlossen die Identit{\"a}t mit einem planetarischen Nebel aus. Mit hoher Wahrscheinlichkeit handelt es sich um einen Supernova{\"u}berrest, zumal im Rahmen der Fehler an gleicher Stelle eine vom R{\"o}ntgensatelliten ROSAT detektierte R{\"o}ntgenquelle liegt. Die in diesem Projekt verwendeten Integral-Field-Instrumente wiesen zwei verschiedene Bauweisen auf, die sich miteinander vergleichen ließen. Ein Hauptkritikpunkt der verwendeten Instrumente war ihre geringe Lichtausbeute. Die gesammelten Erfahrung fanden Eingang in das Konzept des derzeit in Potsdam in der Fertigung befindlichen 3D-Instruments PMAS (Potsdamer Multi - Apertur - Spektrophotometer), welcher zun{\"a}chst f{\"u}r das 3.5m-Teleskop des Calar - Alto - Observatoriums in S{\"u}dspanien vorgesehen ist. Um die Effizienz dieses Instrumentes zu verbessern, wurde in dieser Arbeit die Kopplung der zum Bildrasterung verwendeten Optik zu den Lichtleitfasern im Labor untersucht. Die Untersuchungen zur Maximierung von Lichtausbeute und Stabilit{\"a}t zeigen, daß sich die Effizienz durch Auswahl einer geeigneten Koppelmethode um etwa 20 Prozent steigern l{\"a}sst.},
  language  = {de}
}
@article{LetoTrigilioOskinovaetal.2018,
  author    = {Leto, Paolo and Trigilio, C. and Oskinova, Lida and Ignace, R. and Buemi, C. S. and Umana, G. and Ingallinera, A. and Leone, Francesco and Phillips, N. M. and Agliozzo, Claudia and Todt, Helge Tobias and Cerrigone, L.},
  title     = {A combined multiwavelength VLA/ALMA/Chandra study unveils the complex magnetosphere of the B-type star HR5907},
  series = {Monthly notices of the Royal Astronomical Society},
  volume    = {476},
  journal   = {Monthly notices of the Royal Astronomical Society},
  number    = {1},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0035-8711},
  doi       = {10.1093/mnras/sty244},
  pages     = {562 -- 579},
  year      = {2018},
  abstract  = {We present new radio/millimeter measurements of the hot magnetic star HR5907 obtained with the VLA and ALMA interferometers. We find that HR5907 is the most radio luminous early type star in the cm-mm band among those presently known. Its multi-wavelength radio light curves are strongly variable with an amplitude that increases with radio frequency. The radio emission can be explained by the populations of the non-thermal electrons accelerated in the current sheets on the outer border of the magnetosphere of this fast-rotating magnetic star. We classify HR5907 as another member of the growing class of strongly magnetic fast-rotating hot stars where the gyro-synchrotron emission mechanism efficiently operates in their magnetospheres. The new radio observations of HR5907 are combined with archival X-ray data to study the physical condition of its magnetosphere. The X-ray spectra of HR5907 show tentative evidence for the presence of non-thermal spectral component. We suggest that non-thermal X-rays originate a stellar X-ray aurora due to streams of non-thermal electrons impacting on the stellar surface. Taking advantage of the relation between the spectral indices of the X-ray power-law spectrum and the non-thermal electron energy distributions, we perform 3-D modelling of the radio emission for HR5907. The wavelength-dependent radio light curves probe magnetospheric layers at different heights above the stellar surface. A detailed comparison between simulated and observed radio light curves leads us to conclude that the stellar magnetic field of HR 5907 is likely non-dipolar, providing further indirect evidence of the complex magnetic field topology of HR5907.},
  language  = {en}
}
@misc{YadavalliLoebnerPapkeetal.2018,
  author    = {Yadavalli, Nataraja Sekhar and Loebner, Sarah and Papke, Thomas and Sava, Elena and Hurduc, Nicolae and Santer, Svetlana},
  title     = {A comparative study of photoinduced deformation in azobenzene containing polymer films},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {458},
  issn      = {1866-8372},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-413510},
  year      = {2018},
  abstract  = {In this paper two groups supporting different views on the mechanism of light induced polymer deformation argue about the respective underlying theoretical conceptions, in order to bring this interesting debate to the attention of the scientific community. The group of Prof. Nicolae Hurduc supports the model claiming that the cyclic isomerization of azobenzenes may cause an athermal transition of the glassy azobenzene containing polymer into a fluid state, the so-called photo-fluidization concept. This concept is quite convenient for an intuitive understanding of the deformation process as an anisotropic flow of the polymer material. The group of Prof. Svetlana Santer supports the re-orientational model where the mass-transport of the polymer material accomplished during polymer deformation is stated to be generated by the light-induced re-orientation of the azobenzene side chains and as a consequence of the polymer backbone that in turn results in local mechanical stress, which is enough to irreversibly deform an azobenzene containing material even in the glassy state. For the debate we chose three polymers differing in the glass transition temperature, 32 °C, 87 °C and 95 °C, representing extreme cases of flexible and rigid materials. Polymer film deformation occurring during irradiation with different interference patterns is recorded using a homemade set-up combining an optical part for the generation of interference patterns and an atomic force microscope for acquiring the kinetics of film deformation. We also demonstrated the unique behaviour of azobenzene containing polymeric films to switch the topography in situ and reversibly by changing the irradiation conditions. We discuss the results of reversible deformation of three polymers induced by irradiation with intensity (IIP) and polarization (PIP) interference patterns, and the light of homogeneous intensity in terms of two approaches: the re-orientational and the photo-fluidization concepts. Both agree in that the formation of opto-mechanically induced stresses is a necessary prerequisite for the process of deformation. Using this argument, the deformation process can be characterized either as a flow or mass transport.},
  language  = {en}
}
@article{AgarwalGuntuBanerjeeetal.2022,
  author    = {Agarwal, Ankit and Guntu, Ravikumar and Banerjee, Abhirup and Gadhawe, Mayuri Ashokrao and Marwan, Norbert},
  title     = {A complex network approach to study the extreme precipitation patterns in a river basin},
  series = {Chaos : an interdisciplinary journal of nonlinear science},
  volume    = {32},
  journal   = {Chaos : an interdisciplinary journal of nonlinear science},
  number    = {1},
  publisher = {American Institute of Physics},
  address   = {Woodbury, NY},
  issn      = {1054-1500},
  doi       = {10.1063/5.0072520},
  pages     = {12},
  year      = {2022},
  abstract  = {The quantification of spatial propagation of extreme precipitation events is vital in water resources planning and disaster mitigation. However, quantifying these extreme events has always been challenging as many traditional methods are insufficient to capture the nonlinear interrelationships between extreme event time series. Therefore, it is crucial to develop suitable methods for analyzing the dynamics of extreme events over a river basin with a diverse climate and complicated topography. Over the last decade, complex network analysis emerged as a powerful tool to study the intricate spatiotemporal relationship between many variables in a compact way. In this study, we employ two nonlinear concepts of event synchronization and edit distance to investigate the extreme precipitation pattern in the Ganga river basin. We use the network degree to understand the spatial synchronization pattern of extreme rainfall and identify essential sites in the river basin with respect to potential prediction skills. The study also attempts to quantify the influence of precipitation seasonality and topography on extreme events. The findings of the study reveal that (1) the network degree is decreased in the southwest to northwest direction, (2) the timing of 50th percentile precipitation within a year influences the spatial distribution of degree, (3) the timing is inversely related to elevation, and (4) the lower elevation greatly influences connectivity of the sites. The study highlights that edit distance could be a promising alternative to analyze event-like data by incorporating event time and amplitude and constructing complex networks of climate extremes.},
  language  = {en}
}
@phdthesis{Hakansson2017,
  author    = {H{\aa}kansson, Nils},
  title     = {A Dark Matter line search using 3D-modeling of Cherenkov showers below 10 TeV with VERITAS},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-397670},
  school      = {Universit{\"a}t Potsdam},
  pages     = {107, xxxvi},
  year      = {2017},
  abstract  = {Dark matter, DM, has not yet been directly observed, but it has a very solid theoretical basis. There are observations that provide indirect evidence, like galactic rotation curves that show that the galaxies are rotating too fast to keep their constituent parts, and galaxy clusters that bends the light coming from behind-lying galaxies more than expected with respect to the mass that can be calculated from what can be visibly seen. These observations, among many others, can be explained with theories that include DM. The missing piece is to detect something that can exclusively be explained by DM. Direct observation in a particle accelerator is one way and indirect detection using telescopes is another. This thesis is focused on the latter method. The Very Energetic Radiation Imaging Telescope Array System, V ERITAS, is a telescope array that detects Cherenkov radiation. Theory predicts that DM particles annihilate into, e.g., a γγ pair and create a distinctive energy spectrum when detected by such telescopes, e.i., a monoenergetic line at the same energy as the particle mass. This so called "smoking-gun" signature is sought with a sliding window line search within the sub-range ∼ 0.3 - 10 TeV of the VERITAS energy range, ∼ 0.01 - 30 TeV. Standard analysis within the VERITAS collaboration uses Hillas analysis and look-up tables, acquired by analysing particle simulations, to calculate the energy of the particle causing the Cherenkov shower. In this thesis, an improved analysis method has been used. Modelling each shower as a 3Dgaussian should increase the energy recreation quality. Five dwarf spheroidal galaxies were chosen as targets with a total of ∼ 224 hours of data. The targets were analysed individually and stacked. Particle simulations were based on two simulation packages, CARE and GrISU. Improvements have been made to the energy resolution and bias correction, up to a few percent each, in comparison to standard analysis. Nevertheless, no line with a relevant significance has been detected. The most promising line is at an energy of ∼ 422 GeV with an upper limit cross section of 8.10 · 10^-24 cm^3 s^-1 and a significance of ∼ 2.73 σ, before trials correction and ∼ 1.56 σ after. Upper limit cross sections have also been calculated for the γγ annihilation process and four other outcomes. The limits are in line with current limits using other methods, from ∼ 8.56 · 10^-26 - 6.61 · 10^-23 cm^3s^-1. Future larger telescope arrays, like the upcoming Cherenkov Telescope Array, CTA, will provide better results with the help of this analysis method.},
  language  = {en}
}
@article{FischerWertherBouaklineetal.2020,
  author    = {Fischer, Eric W. and Werther, Michael and Bouakline, Foudhil and Saalfrank, Peter},
  title     = {A hierarchical effective mode approach to phonon-driven multilevel vibrational relaxation dynamics at surfaces},
  series = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry},
  volume    = {153},
  journal   = {The journal of chemical physics : bridges a gap between journals of physics and journals of chemistry},
  number    = {6},
  publisher = {American Institute of Physics},
  address   = {Melville},
  issn      = {0021-9606},
  doi       = {10.1063/5.0017716},
  pages     = {15},
  year      = {2020},
  abstract  = {We discuss an efficient Hierarchical Effective Mode (HEM) representation of a high-dimensional harmonic oscillator bath, which describes phonon-driven vibrational relaxation of an adsorbate-surface system, namely, deuterium adsorbed on Si(100). Starting from the original Hamiltonian of the adsorbate-surface system, the HEM representation is constructed via iterative orthogonal transformations, which are efficiently implemented with Householder matrices. The detailed description of the HEM representation and its construction are given in the second quantization representation. The hierarchical nature of this representation allows access to the exact quantum dynamics of the adsorbate-surface system over finite time intervals, controllable via the truncation order of the hierarchy. To study the convergence properties of the effective mode representation, we solve the time-dependent Schrodinger equation of the truncated system-bath HEM Hamiltonian, with the help of the multilayer extension of the Multiconfigurational Time-Dependent Hartree (ML-MCTDH) method. The results of the HEM representation are compared with those obtained with a quantum-mechanical tier-model. The convergence of the HEM representation with respect to the truncation order of the hierarchy is discussed for different initial conditions of the adsorbate-surface system. The combination of the HEM representation with the ML-MCTDH method provides information on the time evolution of the system (adsorbate) and multiple effective modes of the bath (surface). This permits insight into mechanisms of vibration-phonon coupling of the adsorbate-surface system, as well as inter-mode couplings of the effective bath.},
  language  = {en}
}