@article{FeudelBergemannTuckermanetal.2011,
  author    = {Feudel, Fred and Bergemann, Kay and Tuckerman, Laurette S. and Egbers, C. and Futterer, B. and Gellert, Marcus and Hollerbach, Rainer},
  title     = {Convection patterns in a spherical fluid shell},
  series = {Physical review : E, Statistical, nonlinear and soft matter physics},
  volume    = {83},
  journal   = {Physical review : E, Statistical, nonlinear and soft matter physics},
  number    = {4},
  publisher = {American Physical Society},
  address   = {College Park},
  issn      = {1539-3755},
  doi       = {10.1103/PhysRevE.83.046304},
  pages     = {8},
  year      = {2011},
  abstract  = {Symmetry-breaking bifurcations have been studied for convection in a nonrotating spherical shell whose outer radius is twice the inner radius, under the influence of an externally applied central force field with a radial dependence proportional to 1/r(5). This work is motivated by the GeoFlow experiment, which is performed under microgravity condition at the International Space Station where this particular central force can be generated. In order to predict the observable patterns, simulations together with path-following techniques and stability computations have been applied. Branches of axisymmetric, octahedral, and seven-cell solutions have been traced. The bifurcations producing them have been identified and their stability ranges determined. At higher Rayleigh numbers, time-periodic states with a complex spatiotemporal symmetry are found, which we call breathing patterns.},
  language  = {en}
}
@misc{FedericiPohlRuppeletal.2011,
  author    = {Federici, S. and Pohl, Martin and Ruppel, J. and Telezhinsky, Igor O. and Hofmann, Werner and Martinez, M. and Knapp, J.},
  title     = {Design concepts for the Cherenkov Telescope Array CTA},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  volume    = {32},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1325},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43014},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-430149},
  pages     = {124},
  year      = {2011},
  abstract  = {Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV-10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will consist of two arrays (one in the north, one in the south) for full sky coverage and will be operated as open observatory. The design of CTA is based on currently available technology. This document reports on the status and presents the major design concepts of CTA.},
  language  = {en}
}
@article{Fechner2011,
  author    = {Fechner, Cora},
  title     = {Reconstructing the intergalactic UV background with QSO absorption lines},
  series = {Astronomy and astrophysics : an international weekly journal},
  volume    = {532},
  journal   = {Astronomy and astrophysics : an international weekly journal},
  number    = {2},
  publisher = {EDP Sciences},
  address   = {Les Ulis},
  issn      = {0004-6361},
  doi       = {10.1051/0004-6361/201117080},
  pages     = {15},
  year      = {2011},
  abstract  = {We present a new approach to observationally constraining the spectral energy distribution of the intergalactic UV background by studying metal absorption systems. We study single-component metal line systems that exhibit various well-measured species. Among the observed transitions, at least two ratios of ionization stages from the same element are required, e. g. C III/C IV and Si III/Si IV. For each system photoionization models are constructed by varying the spectrum of the ionizing radiation. The spectral energy distribution can then be constrained by comparing the models with the observed column density ratios. Extensive tests with artificial absorbers show that the spectrum of the ionizing radiation cannot be reconstructed unambiguously, but it is possible to constrain the main characteristics of the spectrum. Furthermore, the resulting physical parameters of the absorber, such as ionization parameter, metallicity, and relative abundances, may depend strongly on the adopted ionizing spectrum. Even in case of well-fitting models, the uncertainties can be as high as similar to 0.5 dex for the ionization parameter and up to similar to 1.5 dex for the metallicity. Therefore, it is essential to know the hardness of the UV background when estimating the metallicity of the intergalactic medium. Applying the procedure to a small sample of 3 observed single-component metal line systems yields a soft ionizing radiation at z > 2 and a slightly harder spectrum at z < 2. The resulting energy distributions exhibit strong He II Lya re-emission features, suggesting that reprocessing by intergalactic He II is important. Comparing the observed systems to UV background spectra from the literature indicates that a recent model that includes sawtooth modulation due to reprocessing by intergalactic He II with delayed helium reionization fits the investigated systems very well.},
  language  = {en}
}
@article{FangWangWirgesetal.2011,
  author    = {Fang, Peng and Wang, Feipeng and Wirges, Werner and Gerhard, Reimund and Basso, Heitor Cury},
  title     = {Three-layer piezoelectrets from fluorinated ethylene-propylene (FEP) copolymer films},
  series = {Applied physics : A, Materials science \& processing},
  volume    = {103},
  journal   = {Applied physics : A, Materials science \& processing},
  number    = {2},
  publisher = {Springer},
  address   = {New York},
  issn      = {0947-8396},
  doi       = {10.1007/s00339-010-6008-2},
  pages     = {455 -- 461},
  year      = {2011},
  abstract  = {A process for preparing three-layer piezoelectrets from fluorinated ethylene-propylene (FEP) copolymer films is introduced. Samples are made from commercial FEP films by means of laser cutting, laser bonding, electrode evaporation, and high-field poling. The observed dielectric-resonance spectra demonstrate the piezoelectricity of the FEP sandwiches. Piezoelectric d (33) coefficients up to a few hundred pC/N are achieved. Charging at elevated temperatures can increase the thermal stability of the piezoelectrets. Isothermal experiments for approximately 15 min demonstrate that samples charged at 140A degrees C keep their piezoelectric activity up to at least 120A degrees C and retain 70\% of their initial d (33) even at 130A degrees C. Acoustical measurements show a relatively flat frequency response in the range between 300 Hz and 20 kHz.},
  language  = {en}
}
@article{EvansDeGioiaEastwoodGagneetal.2011,
  author    = {Evans, Nancy Remage and DeGioia-Eastwood, Kathleen and Gagne, Marc and Townsley, Leisa and Broos, Patrick S. and Wolk, Scott J. and Naze, Yael and Corcoran, Michael and Oskinova, Lidia M. and Moffat, Anthony F. J. and Wang, Junfeng and Walborn, Nolan R.},
  title     = {The search for low-mass companions of b stars in the Carina Nebula cluster trumpler 16},
  series = {The astrophysical journal : an international review of spectroscopy and astronomical physics ; Supplement series},
  volume    = {194},
  journal   = {The astrophysical journal : an international review of spectroscopy and astronomical physics ; Supplement series},
  number    = {1},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0067-0049},
  doi       = {10.1088/0067-0049/194/1/13},
  pages     = {9},
  year      = {2011},
  abstract  = {We have developed lists of likely B3-A0 stars (called "late B" stars) in the young cluster Trumpler 16. The following criteria were used: location within 3' of eta Car, an appropriate V and B - V combination, and proper motion (where available). Color and magnitude cuts have been made assuming an E(B - V) = 0.55 mag +/- 0.1, which is a good approximation close to the center of Trumpler 16. These lists have been cross-correlated with X-ray sources found in the Chandra Carina Complex Project. Previous studies have shown that only very rarely (if at all) do late main-sequence B stars produce X-rays. We present evidence that the X-ray-detected sources are binaries with low-mass companions, since stars less massive than 1.4 M-circle dot are strong X-ray sources at the age of the cluster. Both the median X-ray energies and X-ray luminosities of these sources are in good agreement with values for typical low-mass coronal X-ray sources. We find that 39\% of the late B stars based on a list with proper motions have low-mass companions. Similarly, 32\% of a sample without proper motions have low-mass companions. We discuss the X-ray detection completeness. These results on low-mass companions of intermediate-mass stars are complementary to spectroscopic and interferometric results and probe new parameter space of low-mass companions at all separations. They do not support a steeply rising distribution of mass ratios to low masses for intermediate-mass (5 M-circle dot) primaries, such as would be found by random pairing from the initial mass function.},
  language  = {en}
}
@article{EichlerPohl2011,
  author    = {Eichler, David and Pohl, Martin},
  title     = {Can ultrahigh-energy cosmic rays come from Gamma-ray bursts? - cosmic rays below the ankle and galactic gamma-ray bursts},
  series = {The astrophysical journal : an international review of spectroscopy and astronomical physics ; Part 2, Letters},
  volume    = {738},
  journal   = {The astrophysical journal : an international review of spectroscopy and astronomical physics ; Part 2, Letters},
  number    = {2},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {2041-8205},
  doi       = {10.1088/2041-8205/738/2/L21},
  pages     = {4},
  year      = {2011},
  abstract  = {The maximum cosmic-ray energy achievable by acceleration by a relativistic blast wave is derived. It is shown that forward shocks from long gamma-ray bursts (GRBs) in the interstellar medium accelerate protons to large enough energies, and have a sufficient energy budget, to produce the Galactic cosmic-ray component just below the ankle at 4 x 10(18) eV, as per an earlier suggestion. It is further argued that, were extragalactic long GRBs responsible for the component above the ankle as well, the occasional Galactic GRB within the solar circle would contribute more than the observational limits on the outward flux from the solar circle, unless an avoidance scenario, such as intermittency and/or beaming, allows the present-day local flux to be less than 10(-3) of the average. Difficulties with these avoidance scenarios are noted.},
  language  = {en}
}
@article{DoeringKolloscheRabeetal.2011,
  author    = {D{\"o}ring, Sebastian and Kollosche, Matthias and Rabe, Torsten and Stumpe, Joachim and Kofod, Guggi},
  title     = {Electrically tunable polymer DFB laser},
  series = {Advanced materials},
  volume    = {23},
  journal   = {Advanced materials},
  number    = {37},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0935-9648},
  doi       = {10.1002/adma.201102465},
  pages     = {4265 -- 4269},
  year      = {2011},
  language  = {en}
}
@phdthesis{Doering2011,
  author    = {D{\"o}ring, Sebastian},
  title     = {Oberfl{\"a}chengitter in azobenzenhaltigen Schichten f{\"u}r organische DFB-Laser},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59211},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {Ein neuentwickeltes azobenzenhaltiges Material, das auf einem supramolekularen Konzept basiert, wird bez{\"u}glich seiner Strukturbildung w{\"a}hrend einer holografischen Belichtung bei 488 nm untersucht. Im Mittelpunkt stehen dabei eindimensionale, sinusf{\"o}rmige Reliefs mit Periodizit{\"a}ten kleiner 500 nm. Es wird gezeigt, wie der Grad der Vernetzung der photosensitiven Schicht die Strukturbildung in diesem Gr{\"o}ßenbereich beeinflusst. Zur Maximierung der Strukturtiefe werden gezielt Prozessparameter der Belichtung sowie Materialparameter variiert. Unter Standardbedingungen und moderaten Belichtungsintensit{\"a}ten von ca. 200 mW/cm² bilden sich innerhalb weniger Minuten bei einer Periode von 400 nm Strukturtiefen von bis zu 80nm aus. Durch die Beeinflussung von Materialparametern, wie Oberfl{\"a}chenspannung und Viskosit{\"a}t, wird die maximale Strukturtiefe auf 160nm verdoppelt. Durch Mehrfachbelichtungen wird auch die Bildung von zweidimensionalen Gittern untersucht. Die Originalstrukturen werden in einem Abformverfahren kopiert und in Schichten von unter UV-Licht aush{\"a}rtenden Polymeren {\"u}bertragen. Durch das Abformen kommt es zu einer geringf{\"u}gigen Verschlechterung der Oberfl{\"a}chenqualit{\"a}t sowie Abnahme der Strukturtiefe. Dieser Verlust wird durch eine Verringerung der Prozesstemperatur verringert. Mithilfe kopierter Oberfl{\"a}chengitter werden organische Distributed Feedback-(DFB)-Laser zweiter Ordnung hergestellt, um den Einfluss von Gitterparametern auf die Emissionseigenschaften dieser Laser zu untersuchen. Dazu erfolgt zun{\"a}chst die Charakterisierung der optischen Verst{\"a}rkungseigenschaften ausgew{\"a}hlter organischer Emittermaterialien mittels der Variablen Strichl{\"a}ngenmethode. Das mit dem Laserfarbstoff Pyrromthen567 (PM567) dotierte Polystyrol (PS) zeigt dabei trotz konzentrationsbedingter geringer Absorption eine vergleichsweise geringe Gewinnschwelle von 50µJ/cm² bei ca. 575 nm. Das aktive Gast-Wirt-System der konjugierten Polymere MEH-PPV und F8BT* weist eine hohe Absorption und eine kleine Gewinnschwelle von 2,5 µJ/cm² bei 630 nm auf. Dieses Verhalten spiegelt sich auch in den Emissionseigenschaften der damit hergestellten DFB-Laser wieder. Die Dicke der aktiven Schichten liegen im Bereich hunderter Nanometer und wird so eingestellt, dass sich nur die transversalen Grundmoden im Wellenleiter ausbreiten k{\"o}nnen. Die Gitterperiode sind so gew{\"a}hlt, dass ein Lichtmode im Verst{\"a}rkungsbereich des Emittermaterials liegt. Die Emissionslinien der Laser sind mit FWHM-Werten von bis zu 0,3 nm spektral sehr schmalbandig und weisen auf eine sehr gute Gitterqualit{\"a}t hin. Die Untersuchungen liefern minimale Laserschwellen und maximale differentielle Effizienzen von 4,0µJ/cm² und 8,4\% f{\"u}r MEH-PPV in F8BT* (bei ca. 640nm) sowie 80 µJ/cm² und 0,9\% f{\"u}r PM567 in PS (bei ca. 575 nm). Die Vergr{\"o}ßerung der Strukturtiefe von 40nm auf 80nm in mit MEH-PPV dotierten F8BT*-Lasern zu einem deutlichen Anstieg der ausgekoppelten Energie sowie der differentiellen Effizienz und einem geringen Absinken der Laserschwelle. Dies ist ein Resultat der erh{\"o}hten Kopplung von Lasermode und Gitter. Die Emission von DFB-Lasern mit zweidimensionalen Oberfl{\"a}chengittern zeigen eine Verringerung der Divergenz aber kein Einfluss auf die Laserschwelle. Abschließend erfolgt eine Vermessung der Photostabilit{\"a}t von DFB-Lasern unter verschiedenen Bedingungen. Das Einbringen eines konjugierten Polymers in eine aktive Matrix sowie der Betrieb in einer Stickstoffatmosph{\"a}re f{\"u}hren dabei zu einer Erh{\"o}hung der Lebensdauer auf {\"u}ber eine Million Pulse. Durch die Kombination von Oberfl{\"a}chengittern in PDMS-Filmen mit elektroaktiven Substraten wird eine elektrisch steuerbare Deformation des Beugungsgitters erreicht und auf einen DFB-Laser {\"u}bertragen. Die spannungsinduzierte Verformung wird zun{\"a}chst in Beugungsexperimenten charakterisiert und ein optimaler Arbeitspunkt bestimmt. Mit den beiden Elastomeren SEBS12 und VHB4910 werden in den Gittern maximale Perioden{\"a}nderungen von 1,3\% bzw. 3,4\% bei einer Steuerspannung von 2 kV erreicht. Der Unterschied resultiert aus den verschiedenen Elastizit{\"a}tsmoduln der Materialien. {\"U}bertragen auf DFB-Laser resultiert eine Variation der Gitterperiode senkrecht zu den Gitterlinien in einer kontinuierlichen Verschiebung der Emissionswellenl{\"a}nge. Mit einem Spannungssignal von 3,25 kV wird die schmalbandige Emission eines elastischen DFB-Lasers kontinuierlich um fast 50nm von 604 nm zu 557 nm hin verschoben. Aus dem Deformationsverhalten sowohl der reinen Beugungsgitter als auch der Laser werden R{\"u}ckschl{\"u}sse auf die Elastizit{\"a}t der verwendeten Materialien gezogen und erlauben Verbesserungen der Bauteile.},
  language  = {de}
}
@article{DouceSuisseGuillonetal.2011,
  author    = {Douce, Laurent and Suisse, Jean-Moise and Guillon, Daniel and Taubert, Andreas},
  title     = {Imidazolium-based liquid crystals a modular platform for versatile new materials with finely tuneable properties and behaviour},
  series = {Liquid crystals : an international journal of science and technology},
  volume    = {38},
  journal   = {Liquid crystals : an international journal of science and technology},
  number    = {11-12},
  publisher = {Routledge, Taylor \& Francis Group},
  address   = {Abingdon},
  issn      = {0267-8292},
  doi       = {10.1080/02678292.2011.610474},
  pages     = {1653 -- 1661},
  year      = {2011},
  abstract  = {Ionic liquid Crystals constitute highly versatile materials that have drawn much interest these past few years in the fields of academic research and industrial development. In this respect, the present article is intended as an update of K. Binnemans review published in 2005, but focusing exclusively on the imidazolium cation - the most widely studied. Herein, imidazolium-containing thermotropic liquid crystalline materials will be sorted by molecular structure (mono-, bis-, poly-imidazolium compounds, with symmetrical and non-symmetrical structures) and discussed. Their physico-chemical properties will be exposed in order to adduce the relevancy and potential of the imidazolium platform in various fields of research.},
  language  = {en}
}
@phdthesis{Dosche2011,
  author    = {Dosche, Carsten},
  title     = {Funktionale Farbstoffe und ihre Photophysik und Anwendung in komplexen Matrizes},
  address   = {Potsdam},
  pages     = {151 S.},
  year      = {2011},
  language  = {de}
}