@article{KegelmannTockhornWolffetal.2019,
  author    = {Kegelmann, Lukas and Tockhorn, Philipp and Wolff, Christian Michael and M{\´a}rquez, Jos{\´e} A. and Caicedo D{\´a}vila, Sebasti{\´a}n and Korte, Lars and Unold, Thomas and Loevenich, Wilfried and Neher, Dieter and Rech, Bernd and Albrecht, Steve},
  title     = {Mixtures of Dopant-Free Spiro-OMeTAD and Water-Free PEDOT as a Passivating Hole Contact in Perovskite Solar Cells},
  series = {ACS applied materials \& interfaces},
  volume    = {11},
  journal   = {ACS applied materials \& interfaces},
  number    = {9},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1944-8244},
  doi       = {10.1021/acsami.9b01332},
  pages     = {9172 -- 9181},
  year      = {2019},
  abstract  = {Doped spiro-OMeTAD at present is the most commonly used hole transport material (HTM) in n-i-p-type perovskite solar cells, enabling high efficiencies around 22\%. However, the required dopants were shown to induce nonradiative recombination of charge carriers and foster degradation of the solar cell. Here, in a novel approach, highly conductive and inexpensive water-free poly(3,4-ethylenedioxythiophene) (PEDOT) is used to replace these dopants. The resulting spiro-OMeTAD/PEDOT (SpiDOT) mixed films achieve higher lateral conductivities than layers of doped spiro-OMeTAD. Furthermore, combined transient and steady-state photoluminescence studies reveal a passivating effect of PEDOT, suppressing nonradiative recombination losses at the perovskite/HTM interface. This enables excellent quasi-Fermi level splitting values of up to 1.24 eV in perovskite/SpiDOT layer stacks and high open-circuit voltages (V-OC) up to 1.19 V in complete solar cells. Increasing the amount of dopant-free spiro-OMeTAD in SpiDOT layers is shown to enhance hole extraction and thereby improves the fill factor in solar cells. As a consequence, stabilized efficiencies up to 18.7\% are realized, exceeding cells with doped spiro-OMeTAD as a HTM in this study. Moreover, to the best of our knowledge, these results mark the lowest nonradiative recombination loss in the V-OC (140 mV with respect to the Shockley-Queisser limit) and highest efficiency reported so far for perovskite solar cells using PEDOT as a HTM.},
  language  = {en}
}
@article{AlqahtaniBabicsGorenflotetal.2018,
  author    = {Alqahtani, Obaid and Babics, Maxime and Gorenflot, Julien and Savikhin, Victoria and Ferron, Thomas and Balawi, Ahmed H. and Paulke, Andreas and Kan, Zhipeng and Pope, Michael and Clulow, Andrew J. and Wolf, Jannic and Burn, Paul L. and Gentle, Ian R. and Neher, Dieter and Toney, Michael F. and Laquai, Frederic and Beaujuge, Pierre M. and Collins, Brian A.},
  title     = {Mixed Domains Enhance Charge Generation and Extraction in Bulk-Heterojunction Solar Cells with Small-Molecule Donors},
  series = {Advanced energy materials},
  volume    = {8},
  journal   = {Advanced energy materials},
  number    = {19},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1614-6832},
  doi       = {10.1002/aenm.201702941},
  pages     = {16},
  year      = {2018},
  abstract  = {The interplay between nanomorphology and efficiency of polymer-fullerene bulk-heterojunction (BHJ) solar cells has been the subject of intense research, but the generality of these concepts for small-molecule (SM) BHJs remains unclear. Here, the relation between performance; charge generation, recombination, and extraction dynamics; and nanomorphology achievable with two SM donors benzo[1,2-b:4,5-b]dithiophene-pyrido[3,4-b]-pyrazine BDT(PPTh2)(2), namely SM1 and SM2, differing by their side-chains, are examined as a function of solution additive composition. The results show that the additive 1,8-diiodooctane acts as a plasticizer in the blends, increases domain size, and promotes ordering/crystallinity. Surprisingly, the system with high domain purity (SM1) exhibits both poor exciton harvesting and severe charge trapping, alleviated only slightly with increased crystallinity. In contrast, the system consisting of mixed domains and lower crystallinity (SM2) shows both excellent exciton harvesting and low charge recombination losses. Importantly, the onset of large, pure crystallites in the latter (SM2) system reduces efficiency, pointing to possible differences in the ideal morphologies for SM-based BHJ solar cells compared with polymer-fullerene devices. In polymer-based systems, tie chains between pure polymer crystals establish a continuous charge transport network, whereas SM-based active layers may in some cases require mixed domains that enable both aggregation and charge percolation to the electrodes.},
  language  = {en}
}
@article{LigorioNardiSteyrleuthneretal.2016,
  author    = {Ligorio, G. and Nardi, M. V. and Steyrleuthner, Robert and Ihiawakrim, D. and Crespo-Monteiro, N. and Brinkmann, Martin and Neher, Dieter and Koch, N.},
  title     = {Metal nanoparticle mediated space charge and its optical control in an organic hole-only device},
  series = {Applied physics letters},
  volume    = {108},
  journal   = {Applied physics letters},
  publisher = {American Institute of Physics},
  address   = {Melville},
  issn      = {0003-6951},
  doi       = {10.1063/1.4945710},
  pages     = {5},
  year      = {2016},
  abstract  = {We reveal the role of localized space charges in hole-only devices based on an organic semiconductor with embedded metal nanoparticles (MNPs). MNPs act as deep traps for holes and reduce the current density compared to a device without MNPs by a factor of 10(4) due to the build-up of localized space charge. Dynamic MNPs charged neutrality can be realized during operation by electron transfer from excitons created in the organic matrix, enabling light sensing independent of device bias. In contrast to the previous speculations, electrical bistability in such devices was not observed. (C) 2016 AIP Publishing LLC.},
  language  = {en}
}
@article{GattingerGurkaCraatsetal.1999,
  author    = {Gattinger, P. and Gurka, M. and Craats, A. M. van de and Rengel, Heiko and Warman, J. M. and Buck, M. and Neher, Dieter},
  title     = {Mechanism of charge transport in anisotropic layers of a phthalocyanine polymer},
  year      = {1999},
  language  = {en}
}
@misc{SalibaStolterfohtWolffetal.2018,
  author    = {Saliba, Michael and Stolterfoht, Martin and Wolff, Christian Michael and Neher, Dieter and Abate, Antonio},
  title     = {Measuring aging stability of perovskite solar cells},
  series = {Joule},
  volume    = {2},
  journal   = {Joule},
  number    = {6},
  publisher = {Cell Press},
  address   = {Cambridge},
  issn      = {2542-4351},
  doi       = {10.1016/j.joule.2018.05.005},
  pages     = {1019 -- 1024},
  year      = {2018},
  language  = {en}
}
@article{AsawapiromBulutFarrelletal.2004,
  author    = {Asawapirom, Udom and Bulut, F. and Farrell, Tony and Gadermaier, C. and Gamerith, S. and G{\"u}ntner, Roland and Kietzke, Thomas and Patil, S. and Piok, T. and Montenegro, Rivelino V. D. and Stiller, Burkhard and Tiersch, Brigitte and Landfester, Katharina and List, E. J. W. and Neher, Dieter and Torres, C. S. and Scherf, Ullrich},
  title     = {Materials for polymer electronics applications semiconducting polymer thin films and nanoparticles},
  issn      = {1022-1360},
  year      = {2004},
  abstract  = {The paper presents two different approaches to nanostructured semiconducting polymer materials: (i) the generation of aqueous semiconducting polymer dispersions (semiconducting polymer nanospheres SPNs) and their processing into dense films and layers, and (ii) the synthesis of novel semiconducting polyfluorene-block-polyaniline (PF-b-PANI) block copolymers composed of conjugated blocks of different redox potentials which form nanosized morphologies in the solid state},
  language  = {en}
}
@article{WangSmithSkroblinetal.2020,
  author    = {Wang, Qiong and Smith, Joel A. and Skroblin, Dieter and Steele, Julian A. and Wolff, Christian Michael and Caprioglio, Pietro and Stolterfoht, Martin and K{\"o}bler, Hans and Turren-Cruz, Silver-Hamill and Li, Meng and Gollwitzer, Christian and Neher, Dieter and Abate, Antonio},
  title     = {Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells},
  series = {Solar RRL},
  volume    = {4},
  journal   = {Solar RRL},
  number    = {9},
  publisher = {WILEY-VCH},
  address   = {Weinheim},
  pages     = {9},
  year      = {2020},
  abstract  = {Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6\% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.},
  language  = {en}
}
@misc{WangSmithSkroblinetal.2020,
  author    = {Wang, Qiong and Smith, Joel A. and Skroblin, Dieter and Steele, Julian A. and Wolff, Christian Michael and Caprioglio, Pietro and Stolterfoht, Martin and K{\"o}bler, Hans and Turren-Cruz, Silver-Hamill and Li, Meng and Gollwitzer, Christian and Neher, Dieter and Abate, Antonio},
  title     = {Managing phase purities and crystal orientation for high-performance and photostable cesium lead halide perovskite solar cells},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {9},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52537},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525374},
  pages     = {11},
  year      = {2020},
  abstract  = {Inorganic perovskites with cesium (Cs+) as the cation have great potential as photovoltaic materials if their phase purity and stability can be addressed. Herein, a series of inorganic perovskites is studied, and it is found that the power conversion efficiency of solar cells with compositions CsPbI1.8Br1.2, CsPbI2.0Br1.0, and CsPbI2.2Br0.8 exhibits a high dependence on the initial annealing step that is found to significantly affect the crystallization and texture behavior of the final perovskite film. At its optimized annealing temperature, CsPbI1.8Br1.2 exhibits a pure orthorhombic phase and only one crystal orientation of the (110) plane. Consequently, this allows for the best efficiency of up to 14.6\% and the longest operational lifetime, T-S80, of approximate to 300 h, averaged of over six solar cells, during the maximum power point tracking measurement under continuous light illumination and nitrogen atmosphere. This work provides essential progress on the enhancement of photovoltaic performance and stability of CsPbI3 - xBrx perovskite solar cells.},
  language  = {en}
}
@article{XuBrennerChabanneetal.2014,
  author    = {Xu, Jingsan and Brenner, Thomas J. K. and Chabanne, Laurent and Neher, Dieter and Antonietti, Markus and Shalom, Menny},
  title     = {Liquid-Based growth of polymeric carbon nitride layers and their use in a mesostructured polymer solar cell with V-oc exceeding 1 V},
  series = {Journal of the American Chemical Society},
  volume    = {136},
  journal   = {Journal of the American Chemical Society},
  number    = {39},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0002-7863},
  doi       = {10.1021/ja508329c},
  pages     = {13486 -- 13489},
  year      = {2014},
  abstract  = {Herein we report a general liquid-mediated pathway for the growth of continuous polymeric carbon nitride (C3N4) thin films. The deposition method consists of the use of supramolecular complexes that transform to the liquid state before direct thermal condensation into C3N4 solid films. The resulting films exhibit continuous porous C3N4 networks on various substrates. Moreover, the optical absorption can be easily tuned to cover the solar spectrum by the insertion of an additional molecule into the starting complex. The strength of the deposition method is demonstrated by the use of the C3N4 layer as the electron acceptor in a polymer solar cell that exhibits a remarkable open-circuit voltage exceeding 1 V. The easy, safe, and direct synthesis of carbon nitride in a continuous layered architecture on different functional substrates opens new possibilities for the fabrication of many energy-related devices.},
  language  = {en}
}
@article{NothoferMeiselMitevaetal.2000,
  author    = {Nothofer, Heinz-Georg and Meisel, A. and Miteva, T. and Neher, Dieter and Forster, M. and Oda, Masao and Lieser, G. and Sainova, Dessislava and Yasuda, A. and Lupo, D. and Knoll, W. and Scherf, Ullrich},
  title     = {Liquid crystalline polyfluorenes for blue polarized electroluminescence},
  year      = {2000},
  language  = {en}
}