@inproceedings{CurzonKalasSchubertetal.2015, author = {Curzon, Paul and Kalas, Ivan and Schubert, Sigrid and Schaper, Niclas and Barnes, Jan and Kennewell, Steve and Br{\"o}ker, Kathrin and Kastens, Uwe and Magenheim, Johannes and Dagiene, Valentina and Stupuriene, Gabriele and Ellis, Jason Brent and Abreu-Ellis, Carla Reis and Grillenberger, Andreas and Romeike, Ralf and Haugsbakken, Halvdan and Jones, Anthony and Lewin, Cathy and McNicol, Sarah and Nelles, Wolfgang and Neugebauer, Jonas and Ohrndorf, Laura and Schaper, Niclas and Schubert, Sigrid and Opel, Simone and Kramer, Matthias and Trommen, Michael and Pottb{\"a}cker, Florian and Ilaghef, Youssef and Passig, David and Tzuriel, David and Kedmi, Ganit Eshel and Saito, Toshinori and Webb, Mary and Weigend, Michael and Bottino, Rosa and Chioccariello, Augusto and Christensen, Rhonda and Knezek, Gerald and Gioko, Anthony Maina and Angondi, Enos Kiforo and Waga, Rosemary and Ohrndorf, Laura and Or-Bach, Rachel and Preston, Christina and Younie, Sarah and Przybylla, Mareen and Romeike, Ralf and Reynolds, Nicholas and Swainston, Andrew and Bendrups, Faye and Sysło, Maciej M. and Kwiatkowska, Anna Beata and Zieris, Holger and Gerstberger, Herbert and M{\"u}ller, Wolfgang and B{\"u}chner, Steffen and Opel, Simone and Schiller, Thomas and Wegner, Christian and Zender, Raphael and Lucke, Ulrike and Diethelm, Ira and Syrbe, J{\"o}rn and Lai, Kwok-Wing and Davis, Niki and Eickelmann, Birgit and Erstad, Ola and Fisser, Petra and Gibson, David and Khaddage, Ferial and Knezek, Gerald and Micheuz, Peter and Kloos, Carlos Delgado}, title = {KEYCIT 2014}, editor = {Brinda, Torsten and Reynolds, Nicholas and Romeike, Ralf and Schwill, Andreas}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-292-6}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-70325}, pages = {438}, year = {2015}, abstract = {In our rapidly changing world it is increasingly important not only to be an expert in a chosen field of study but also to be able to respond to developments, master new approaches to solving problems, and fulfil changing requirements in the modern world and in the job market. In response to these needs key competencies in understanding, developing and using new digital technologies are being brought into focus in school and university programmes. The IFIP TC3 conference "KEYCIT - Key Competences in Informatics and ICT (KEYCIT 2014)" was held at the University of Potsdam in Germany from July 1st to 4th, 2014 and addressed the combination of key competencies, Informatics and ICT in detail. The conference was organized into strands focusing on secondary education, university education and teacher education (organized by IFIP WGs 3.1 and 3.3) and provided a forum to present and to discuss research, case studies, positions, and national perspectives in this field.}, language = {en} } @phdthesis{Kluth2011, author = {Kluth, Stephan}, title = {Quantitative modeling and analysis with FMC-QE}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52987}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp '07, pages 280 - 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.}, language = {en} } @phdthesis{Ahmad2014, author = {Ahmad, Nadeem}, title = {People centered HMI's for deaf and functionally illiterate users}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70391}, school = {Universit{\"a}t Potsdam}, year = {2014}, abstract = {The objective and motivation behind this research is to provide applications with easy-to-use interfaces to communities of deaf and functionally illiterate users, which enables them to work without any human assistance. Although recent years have witnessed technological advancements, the availability of technology does not ensure accessibility to information and communication technologies (ICT). Extensive use of text from menus to document contents means that deaf or functionally illiterate can not access services implemented on most computer software. Consequently, most existing computer applications pose an accessibility barrier to those who are unable to read fluently. Online technologies intended for such groups should be developed in continuous partnership with primary users and include a thorough investigation into their limitations, requirements and usability barriers. In this research, I investigated existing tools in voice, web and other multimedia technologies to identify learning gaps and explored ways to enhance the information literacy for deaf and functionally illiterate users. I worked on the development of user-centered interfaces to increase the capabilities of deaf and low literacy users by enhancing lexical resources and by evaluating several multimedia interfaces for them. The interface of the platform-independent Italian Sign Language (LIS) Dictionary has been developed to enhance the lexical resources for deaf users. The Sign Language Dictionary accepts Italian lemmas as input and provides their representation in the Italian Sign Language as output. The Sign Language dictionary has 3082 signs as set of Avatar animations in which each sign is linked to a corresponding Italian lemma. I integrated the LIS lexical resources with MultiWordNet (MWN) database to form the first LIS MultiWordNet(LMWN). LMWN contains information about lexical relations between words, semantic relations between lexical concepts (synsets), correspondences between Italian and sign language lexical concepts and semantic fields (domains). The approach enhances the deaf users' understanding of written Italian language and shows that a relatively small set of lexicon can cover a significant portion of MWN. Integration of LIS signs with MWN made it useful tool for computational linguistics and natural language processing. The rule-based translation process from written Italian text to LIS has been transformed into service-oriented system. The translation process is composed of various modules including parser, semantic interpreter, generator, and spatial allocation planner. This translation procedure has been implemented in the Java Application Building Center (jABC), which is a framework for extreme model driven design (XMDD). The XMDD approach focuses on bringing software development closer to conceptual design, so that the functionality of a software solution could be understood by someone who is unfamiliar with programming concepts. The transformation addresses the heterogeneity challenge and enhances the re-usability of the system. For enhancing the e-participation of functionally illiterate users, two detailed studies were conducted in the Republic of Rwanda. In the first study, the traditional (textual) interface was compared with the virtual character-based interactive interface. The study helped to identify usability barriers and users evaluated these interfaces according to three fundamental areas of usability, i.e. effectiveness, efficiency and satisfaction. In another study, we developed four different interfaces to analyze the usability and effects of online assistance (consistent help) for functionally illiterate users and compared different help modes including textual, vocal and virtual character on the performance of semi-literate users. In our newly designed interfaces the instructions were automatically translated in Swahili language. All the interfaces were evaluated on the basis of task accomplishment, time consumption, System Usability Scale (SUS) rating and number of times the help was acquired. The results show that the performance of semi-literate users improved significantly when using the online assistance. The dissertation thus introduces a new development approach in which virtual characters are used as additional support for barely literate or naturally challenged users. Such components enhanced the application utility by offering a variety of services like translating contents in local language, providing additional vocal information, and performing automatic translation from text to sign language. Obviously, there is no such thing as one design solution that fits for all in the underlying domain. Context sensitivity, literacy and mental abilities are key factors on which I concentrated and the results emphasize that computer interfaces must be based on a thoughtful definition of target groups, purposes and objectives.}, language = {en} } @phdthesis{Raetsch2001, author = {R{\"a}tsch, Gunnar}, title = {Robust boosting via convex optimization}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000399}, school = {Universit{\"a}t Potsdam}, year = {2001}, abstract = {In dieser Arbeit werden statistische Lernprobleme betrachtet. Lernmaschinen extrahieren Informationen aus einer gegebenen Menge von Trainingsmustern, so daß sie in der Lage sind, Eigenschaften von bisher ungesehenen Mustern - z.B. eine Klassenzugeh{\"o}rigkeit - vorherzusagen. Wir betrachten den Fall, bei dem die resultierende Klassifikations- oder Regressionsregel aus einfachen Regeln - den Basishypothesen - zusammengesetzt ist. Die sogenannten Boosting Algorithmen erzeugen iterativ eine gewichtete Summe von Basishypothesen, die gut auf ungesehenen Mustern vorhersagen. Die Arbeit behandelt folgende Sachverhalte: o Die zur Analyse von Boosting-Methoden geeignete Statistische Lerntheorie. Wir studieren lerntheoretische Garantien zur Absch{\"a}tzung der Vorhersagequalit{\"a}t auf ungesehenen Mustern. K{\"u}rzlich haben sich sogenannte Klassifikationstechniken mit großem Margin als ein praktisches Ergebnis dieser Theorie herausgestellt - insbesondere Boosting und Support-Vektor-Maschinen. Ein großer Margin impliziert eine hohe Vorhersagequalit{\"a}t der Entscheidungsregel. Deshalb wird analysiert, wie groß der Margin bei Boosting ist und ein verbesserter Algorithmus vorgeschlagen, der effizient Regeln mit maximalem Margin erzeugt. o Was ist der Zusammenhang von Boosting und Techniken der konvexen Optimierung? Um die Eigenschaften der entstehenden Klassifikations- oder Regressionsregeln zu analysieren, ist es sehr wichtig zu verstehen, ob und unter welchen Bedingungen iterative Algorithmen wie Boosting konvergieren. Wir zeigen, daß solche Algorithmen benutzt werden koennen, um sehr große Optimierungsprobleme mit Nebenbedingungen zu l{\"o}sen, deren L{\"o}sung sich gut charakterisieren laesst. Dazu werden Verbindungen zum Wissenschaftsgebiet der konvexen Optimierung aufgezeigt und ausgenutzt, um Konvergenzgarantien f{\"u}r eine große Familie von Boosting-{\"a}hnlichen Algorithmen zu geben. o Kann man Boosting robust gegen{\"u}ber Meßfehlern und Ausreissern in den Daten machen? Ein Problem bisheriger Boosting-Methoden ist die relativ hohe Sensitivit{\"a}t gegen{\"u}ber Messungenauigkeiten und Meßfehlern in der Trainingsdatenmenge. Um dieses Problem zu beheben, wird die sogenannte 'Soft-Margin' Idee, die beim Support-Vector Lernen schon benutzt wird, auf Boosting {\"u}bertragen. Das f{\"u}hrt zu theoretisch gut motivierten, regularisierten Algorithmen, die ein hohes Maß an Robustheit aufweisen. o Wie kann man die Anwendbarkeit von Boosting auf Regressionsprobleme erweitern? Boosting-Methoden wurden urspr{\"u}nglich f{\"u}r Klassifikationsprobleme entwickelt. Um die Anwendbarkeit auf Regressionsprobleme zu erweitern, werden die vorherigen Konvergenzresultate benutzt und neue Boosting-{\"a}hnliche Algorithmen zur Regression entwickelt. Wir zeigen, daß diese Algorithmen gute theoretische und praktische Eigenschaften haben. o Ist Boosting praktisch anwendbar? Die dargestellten theoretischen Ergebnisse werden begleitet von Simulationsergebnissen, entweder, um bestimmte Eigenschaften von Algorithmen zu illustrieren, oder um zu zeigen, daß sie in der Praxis tats{\"a}chlich gut funktionieren und direkt einsetzbar sind. Die praktische Relevanz der entwickelten Methoden wird in der Analyse chaotischer Zeitreihen und durch industrielle Anwendungen wie ein Stromverbrauch-{\"U}berwachungssystem und bei der Entwicklung neuer Medikamente illustriert.}, language = {en} } @phdthesis{Dornhege2006, author = {Dornhege, Guido}, title = {Increasing information transfer rates for brain-computer interfacing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7690}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {The goal of a Brain-Computer Interface (BCI) consists of the development of a unidirectional interface between a human and a computer to allow control of a device only via brain signals. While the BCI systems of almost all other groups require the user to be trained over several weeks or even months, the group of Prof. Dr. Klaus-Robert M{\"u}ller in Berlin and Potsdam, which I belong to, was one of the first research groups in this field which used machine learning techniques on a large scale. The adaptivity of the processing system to the individual brain patterns of the subject confers huge advantages for the user. Thus BCI research is considered a hot topic in machine learning and computer science. It requires interdisciplinary cooperation between disparate fields such as neuroscience, since only by combining machine learning and signal processing techniques based on neurophysiological knowledge will the largest progress be made. In this work I particularly deal with my part of this project, which lies mainly in the area of computer science. I have considered the following three main points: Establishing a performance measure based on information theory: I have critically illuminated the assumptions of Shannon's information transfer rate for application in a BCI context. By establishing suitable coding strategies I was able to show that this theoretical measure approximates quite well to what is practically achieveable. Transfer and development of suitable signal processing and machine learning techniques: One substantial component of my work was to develop several machine learning and signal processing algorithms to improve the efficiency of a BCI. Based on the neurophysiological knowledge that several independent EEG features can be observed for some mental states, I have developed a method for combining different and maybe independent features which improved performance. In some cases the performance of the combination algorithm outperforms the best single performance by more than 50 \%. Furthermore, I have theoretically and practically addressed via the development of suitable algorithms the question of the optimal number of classes which should be used for a BCI. It transpired that with BCI performances reported so far, three or four different mental states are optimal. For another extension I have combined ideas from signal processing with those of machine learning since a high gain can be achieved if the temporal filtering, i.e., the choice of frequency bands, is automatically adapted to each subject individually. Implementation of the Berlin brain computer interface and realization of suitable experiments: Finally a further substantial component of my work was to realize an online BCI system which includes the developed methods, but is also flexible enough to allow the simple realization of new algorithms and ideas. So far, bitrates of up to 40 bits per minute have been achieved with this system by absolutely untrained users which, compared to results of other groups, is highly successful.}, subject = {Kybernetik}, language = {en} } @phdthesis{Scholz2006, author = {Scholz, Matthias}, title = {Approaches to analyse and interpret biological profile data}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7839}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Advances in biotechnologies rapidly increase the number of molecules of a cell which can be observed simultaneously. This includes expression levels of thousands or ten-thousands of genes as well as concentration levels of metabolites or proteins. Such Profile data, observed at different times or at different experimental conditions (e.g., heat or dry stress), show how the biological experiment is reflected on the molecular level. This information is helpful to understand the molecular behaviour and to identify molecules or combination of molecules that characterise specific biological condition (e.g., disease). This work shows the potentials of component extraction algorithms to identify the major factors which influenced the observed data. This can be the expected experimental factors such as the time or temperature as well as unexpected factors such as technical artefacts or even unknown biological behaviour. Extracting components means to reduce the very high-dimensional data to a small set of new variables termed components. Each component is a combination of all original variables. The classical approach for that purpose is the principal component analysis (PCA). It is shown that, in contrast to PCA which maximises the variance only, modern approaches such as independent component analysis (ICA) are more suitable for analysing molecular data. The condition of independence between components of ICA fits more naturally our assumption of individual (independent) factors which influence the data. This higher potential of ICA is demonstrated by a crossing experiment of the model plant Arabidopsis thaliana (Thale Cress). The experimental factors could be well identified and, in addition, ICA could even detect a technical artefact. However, in continuously observations such as in time experiments, the data show, in general, a nonlinear distribution. To analyse such nonlinear data, a nonlinear extension of PCA is used. This nonlinear PCA (NLPCA) is based on a neural network algorithm. The algorithm is adapted to be applicable to incomplete molecular data sets. Thus, it provides also the ability to estimate the missing data. The potential of nonlinear PCA to identify nonlinear factors is demonstrated by a cold stress experiment of Arabidopsis thaliana. The results of component analysis can be used to build a molecular network model. Since it includes functional dependencies it is termed functional network. Applied to the cold stress data, it is shown that functional networks are appropriate to visualise biological processes and thereby reveals molecular dynamics.}, subject = {Bioinformatik}, language = {en} } @article{Arnold2007, author = {Arnold, Holger}, title = {A linearized DPLL calculus with learning}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-15421}, year = {2007}, abstract = {This paper describes the proof calculus LD for clausal propositional logic, which is a linearized form of the well-known DPLL calculus extended by clause learning. It is motivated by the demand to model how current SAT solvers built on clause learning are working, while abstracting from decision heuristics and implementation details. The calculus is proved sound and terminating. Further, it is shown that both the original DPLL calculus and the conflict-directed backtracking calculus with clause learning, as it is implemented in many current SAT solvers, are complete and proof-confluent instances of the LD calculus.}, language = {en} } @misc{Trapp2007, type = {Master Thesis}, author = {Trapp, Matthias}, title = {Analysis and exploration of virtual 3D city models using 3D information lenses}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13930}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {This thesis addresses real-time rendering techniques for 3D information lenses based on the focus \& context metaphor. It analyzes, conceives, implements, and reviews its applicability to objects and structures of virtual 3D city models. In contrast to digital terrain models, the application of focus \& context visualization to virtual 3D city models is barely researched. However, the purposeful visualization of contextual data of is extreme importance for the interactive exploration and analysis of this field. Programmable hardware enables the implementation of new lens techniques, that allow the augmentation of the perceptive and cognitive quality of the visualization compared to classical perspective projections. A set of 3D information lenses is integrated into a 3D scene-graph system: • Occlusion lenses modify the appearance of virtual 3D city model objects to resolve their occlusion and consequently facilitate the navigation. • Best-view lenses display city model objects in a priority-based manner and mediate their meta information. Thus, they support exploration and navigation of virtual 3D city models. • Color and deformation lenses modify the appearance and geometry of 3D city models to facilitate their perception. The presented techniques for 3D information lenses and their application to virtual 3D city models clarify their potential for interactive visualization and form a base for further development.}, language = {en} } @phdthesis{Blum2010, author = {Blum, Niklas}, title = {Formalization of a converged internet and telecommunications service environment}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51146}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {The programmable network envisioned in the 1990s within standardization and research for the Intelligent Network is currently coming into reality using IPbased Next Generation Networks (NGN) and applying Service-Oriented Architecture (SOA) principles for service creation, execution, and hosting. SOA is the foundation for both next-generation telecommunications and middleware architectures, which are rapidly converging on top of commodity transport services. Services such as triple/quadruple play, multimedia messaging, and presence are enabled by the emerging service-oriented IPMultimedia Subsystem (IMS), and allow telecommunications service providers to maintain, if not improve, their position in the marketplace. SOA becomes the de facto standard in next-generation middleware systems as the system model of choice to interconnect service consumers and providers within and between enterprises. We leverage previous research activities in overlay networking technologies along with recent advances in network abstraction, service exposure, and service creation to develop a paradigm for a service environment providing converged Internet and Telecommunications services that we call Service Broker. Such a Service Broker provides mechanisms to combine and mediate between different service paradigms from the two domains Internet/WWW and telecommunications. Furthermore, it enables the composition of services across these domains and is capable of defining and applying temporal constraints during creation and execution time. By adding network-awareness into the service fabric, such a Service Broker may also act as a next generation network-to-service element allowing the composition of crossdomain and cross-layer network and service resources. The contribution of this research is threefold: first, we analyze and classify principles and technologies from Information Technologies (IT) and telecommunications to identify and discuss issues allowing cross-domain composition in a converging service layer. Second, we discuss service composition methods allowing the creation of converged services on an abstract level; in particular, we present a formalized method for model-checking of such compositions. Finally, we propose a Service Broker architecture converging Internet and Telecom services. This environment enables cross-domain feature interaction in services through formalized obligation policies acting as constraints during service discovery, creation, and execution time.}, language = {en} } @phdthesis{Brueckner2012, author = {Br{\"u}ckner, Michael}, title = {Prediction games : machine learning in the presence of an adversary}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-203-2}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60375}, school = {Universit{\"a}t Potsdam}, pages = {x, 121}, year = {2012}, abstract = {In many applications one is faced with the problem of inferring some functional relation between input and output variables from given data. Consider, for instance, the task of email spam filtering where one seeks to find a model which automatically assigns new, previously unseen emails to class spam or non-spam. Building such a predictive model based on observed training inputs (e.g., emails) with corresponding outputs (e.g., spam labels) is a major goal of machine learning. Many learning methods assume that these training data are governed by the same distribution as the test data which the predictive model will be exposed to at application time. That assumption is violated when the test data are generated in response to the presence of a predictive model. This becomes apparent, for instance, in the above example of email spam filtering. Here, email service providers employ spam filters and spam senders engineer campaign templates such as to achieve a high rate of successful deliveries despite any filters. Most of the existing work casts such situations as learning robust models which are unsusceptible against small changes of the data generation process. The models are constructed under the worst-case assumption that these changes are performed such to produce the highest possible adverse effect on the performance of the predictive model. However, this approach is not capable to realistically model the true dependency between the model-building process and the process of generating future data. We therefore establish the concept of prediction games: We model the interaction between a learner, who builds the predictive model, and a data generator, who controls the process of data generation, as an one-shot game. The game-theoretic framework enables us to explicitly model the players' interests, their possible actions, their level of knowledge about each other, and the order at which they decide for an action. We model the players' interests as minimizing their own cost function which both depend on both players' actions. The learner's action is to choose the model parameters and the data generator's action is to perturbate the training data which reflects the modification of the data generation process with respect to the past data. We extensively study three instances of prediction games which differ regarding the order in which the players decide for their action. We first assume that both player choose their actions simultaneously, that is, without the knowledge of their opponent's decision. We identify conditions under which this Nash prediction game has a meaningful solution, that is, a unique Nash equilibrium, and derive algorithms that find the equilibrial prediction model. As a second case, we consider a data generator who is potentially fully informed about the move of the learner. This setting establishes a Stackelberg competition. We derive a relaxed optimization criterion to determine the solution of this game and show that this Stackelberg prediction game generalizes existing prediction models. Finally, we study the setting where the learner observes the data generator's action, that is, the (unlabeled) test data, before building the predictive model. As the test data and the training data may be governed by differing probability distributions, this scenario reduces to learning under covariate shift. We derive a new integrated as well as a two-stage method to account for this data set shift. In case studies on email spam filtering we empirically explore properties of all derived models as well as several existing baseline methods. We show that spam filters resulting from the Nash prediction game as well as the Stackelberg prediction game in the majority of cases outperform other existing baseline methods.}, language = {en} } @phdthesis{Thiele2011, author = {Thiele, Sven}, title = {Modeling biological systems with Answer Set Programming}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59383}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Biology has made great progress in identifying and measuring the building blocks of life. The availability of high-throughput methods in molecular biology has dramatically accelerated the growth of biological knowledge for various organisms. The advancements in genomic, proteomic and metabolomic technologies allow for constructing complex models of biological systems. An increasing number of biological repositories is available on the web, incorporating thousands of biochemical reactions and genetic regulations. Systems Biology is a recent research trend in life science, which fosters a systemic view on biology. In Systems Biology one is interested in integrating the knowledge from all these different sources into models that capture the interaction of these entities. By studying these models one wants to understand the emerging properties of the whole system, such as robustness. However, both measurements as well as biological networks are prone to considerable incompleteness, heterogeneity and mutual inconsistency, which makes it highly non-trivial to draw biologically meaningful conclusions in an automated way. Therefore, we want to promote Answer Set Programming (ASP) as a tool for discrete modeling in Systems Biology. ASP is a declarative problem solving paradigm, in which a problem is encoded as a logic program such that its answer sets represent solutions to the problem. ASP has intrinsic features to cope with incompleteness, offers a rich modeling language and highly efficient solving technology. We present ASP solutions, for the analysis of genetic regulatory networks, determining consistency with observed measurements and identifying minimal causes for inconsistency. We extend this approach for computing minimal repairs on model and data that restore consistency. This method allows for predicting unobserved data even in case of inconsistency. Further, we present an ASP approach to metabolic network expansion. This approach exploits the easy characterization of reachability in ASP and its various reasoning methods, to explore the biosynthetic capabilities of metabolic reaction networks and generate hypotheses for extending the network. Finally, we present the BioASP library, a Python library which encapsulates our ASP solutions into the imperative programming paradigm. The library allows for an easy integration of ASP solution into system rich environments, as they exist in Systems Biology.}, language = {en} } @phdthesis{Bordihn2011, author = {Bordihn, Henning}, title = {Contributions to the syntactical analysis beyond context-freeness}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59719}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Parsability approaches of several grammar formalisms generating also non-context-free languages are explored. Chomsky grammars, Lindenmayer systems, grammars with controlled derivations, and grammar systems are treated. Formal properties of these mechanisms are investigated, when they are used as language acceptors. Furthermore, cooperating distributed grammar systems are restricted so that efficient deterministic parsing without backtracking becomes possible. For this class of grammar systems, the parsing algorithm is presented and the feature of leftmost derivations is investigated in detail.}, language = {en} } @phdthesis{Boehm2013, author = {B{\"o}hm, Christoph}, title = {Enriching the Web of Data with topics and links}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68624}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {This thesis presents novel ideas and research findings for the Web of Data - a global data space spanning many so-called Linked Open Data sources. Linked Open Data adheres to a set of simple principles to allow easy access and reuse for data published on the Web. Linked Open Data is by now an established concept and many (mostly academic) publishers adopted the principles building a powerful web of structured knowledge available to everybody. However, so far, Linked Open Data does not yet play a significant role among common web technologies that currently facilitate a high-standard Web experience. In this work, we thoroughly discuss the state-of-the-art for Linked Open Data and highlight several shortcomings - some of them we tackle in the main part of this work. First, we propose a novel type of data source meta-information, namely the topics of a dataset. This information could be published with dataset descriptions and support a variety of use cases, such as data source exploration and selection. For the topic retrieval, we present an approach coined Annotated Pattern Percolation (APP), which we evaluate with respect to topics extracted from Wikipedia portals. Second, we contribute to entity linking research by presenting an optimization model for joint entity linking, showing its hardness, and proposing three heuristics implemented in the LINked Data Alignment (LINDA) system. Our first solution can exploit multi-core machines, whereas the second and third approach are designed to run in a distributed shared-nothing environment. We discuss and evaluate the properties of our approaches leading to recommendations which algorithm to use in a specific scenario. The distributed algorithms are among the first of their kind, i.e., approaches for joint entity linking in a distributed fashion. Also, we illustrate that we can tackle the entity linking problem on the very large scale with data comprising more than 100 millions of entity representations from very many sources. Finally, we approach a sub-problem of entity linking, namely the alignment of concepts. We again target a method that looks at the data in its entirety and does not neglect existing relations. Also, this concept alignment method shall execute very fast to serve as a preprocessing for further computations. Our approach, called Holistic Concept Matching (HCM), achieves the required speed through grouping the input by comparing so-called knowledge representations. Within the groups, we perform complex similarity computations, relation conclusions, and detect semantic contradictions. The quality of our result is again evaluated on a large and heterogeneous dataset from the real Web. In summary, this work contributes a set of techniques for enhancing the current state of the Web of Data. All approaches have been tested on large and heterogeneous real-world input.}, language = {en} } @phdthesis{Sawade2012, author = {Sawade, Christoph}, title = {Active evaluation of predictive models}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-255-1}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-65583}, school = {Universit{\"a}t Potsdam}, pages = {ix, 157}, year = {2012}, abstract = {The field of machine learning studies algorithms that infer predictive models from data. Predictive models are applicable for many practical tasks such as spam filtering, face and handwritten digit recognition, and personalized product recommendation. In general, they are used to predict a target label for a given data instance. In order to make an informed decision about the deployment of a predictive model, it is crucial to know the model's approximate performance. To evaluate performance, a set of labeled test instances is required that is drawn from the distribution the model will be exposed to at application time. In many practical scenarios, unlabeled test instances are readily available, but the process of labeling them can be a time- and cost-intensive task and may involve a human expert. This thesis addresses the problem of evaluating a given predictive model accurately with minimal labeling effort. We study an active model evaluation process that selects certain instances of the data according to an instrumental sampling distribution and queries their labels. We derive sampling distributions that minimize estimation error with respect to different performance measures such as error rate, mean squared error, and F-measures. An analysis of the distribution that governs the estimator leads to confidence intervals, which indicate how precise the error estimation is. Labeling costs may vary across different instances depending on certain characteristics of the data. For instance, documents differ in their length, comprehensibility, and technical requirements; these attributes affect the time a human labeler needs to judge relevance or to assign topics. To address this, the sampling distribution is extended to incorporate instance-specific costs. We empirically study conditions under which the active evaluation processes are more accurate than a standard estimate that draws equally many instances from the test distribution. We also address the problem of comparing the risks of two predictive models. The standard approach would be to draw instances according to the test distribution, label the selected instances, and apply statistical tests to identify significant differences. Drawing instances according to an instrumental distribution affects the power of a statistical test. We derive a sampling procedure that maximizes test power when used to select instances, and thereby minimizes the likelihood of choosing the inferior model. Furthermore, we investigate the task of comparing several alternative models; the objective of an evaluation could be to rank the models according to the risk that they incur or to identify the model with lowest risk. An experimental study shows that the active procedure leads to higher test power than the standard test in many application domains. Finally, we study the problem of evaluating the performance of ranking functions, which are used for example for web search. In practice, ranking performance is estimated by applying a given ranking model to a representative set of test queries and manually assessing the relevance of all retrieved items for each query. We apply the concepts of active evaluation and active comparison to ranking functions and derive optimal sampling distributions for the commonly used performance measures Discounted Cumulative Gain and Expected Reciprocal Rank. Experiments on web search engine data illustrate significant reductions in labeling costs.}, language = {en} } @article{Frank2012, author = {Frank, Mario}, title = {Axiom relevance decision engine : technical report}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72128}, year = {2012}, abstract = {This document presents an axiom selection technique for classic first order theorem proving based on the relevance of axioms for the proof of a conjecture. It is based on unifiability of predicates and does not need statistical information like symbol frequency. The scope of the technique is the reduction of the set of axioms and the increase of the amount of provable conjectures in a given time. Since the technique generates a subset of the axiom set, it can be used as a preprocessor for automated theorem proving. This technical report describes the conception, implementation and evaluation of ARDE. The selection method, which is based on a breadth-first graph search by unifiability of predicates, is a weakened form of the connection calculus and uses specialised variants or unifiability to speed up the selection. The implementation of the concept is evaluated with comparison to the results of the world championship of theorem provers of the year 2012 (CASC J6). It is shown that both the theorem prover leanCoP which uses the connection calculus and E which uses equality reasoning, can benefit from the selection approach. Also, the evaluation shows that the concept is applyable for theorem proving problems with thousands of formulae and that the selection is independent from the calculus used by the theorem prover.}, language = {en} } @misc{Frank2013, type = {Master Thesis}, author = {Frank, Mario}, title = {TEMPLAR : efficient determination of relevant axioms in big formula sets for theorem proving}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72112}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {This document presents a formula selection system for classical first order theorem proving based on the relevance of formulae for the proof of a conjecture. It is based on unifiability of predicates and is also able to use a linguistic approach for the selection. The scope of the technique is the reduction of the set of formulae and the increase of the amount of provable conjectures in a given time. Since the technique generates a subset of the formula set, it can be used as a preprocessor for automated theorem proving. The document contains the conception, implementation and evaluation of both selection concepts. While the one concept generates a search graph over the negation normal forms or Skolem normal forms of the given formulae, the linguistic concept analyses the formulae and determines frequencies of lexemes and uses a tf-idf weighting algorithm to determine the relevance of the formulae. Though the concept is built for first order logic, it is not limited to it. The concept can be used for higher order and modal logik, too, with minimal adoptions. The system was also evaluated at the world championship of automated theorem provers (CADE ATP Systems Competition, CASC-24) in combination with the leanCoP theorem prover and the evaluation of the results of the CASC and the benchmarks with the problems of the CASC of the year 2012 (CASC-J6) show that the concept of the system has positive impact to the performance of automated theorem provers. Also, the benchmarks with two different theorem provers which use different calculi have shown that the selection is independent from the calculus. Moreover, the concept of TEMPLAR has shown to be competitive to some extent with the concept of SinE and even helped one of the theorem provers to solve problems that were not (or slower) solved with SinE selection in the CASC. Finally, the evaluation implies that the combination of the unification based and linguistic selection yields more improved results though no optimisation was done for the problems.}, language = {en} } @phdthesis{Lindauer2014, author = {Lindauer, T. Marius}, title = {Algorithm selection, scheduling and configuration of Boolean constraint solvers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-71260}, school = {Universit{\"a}t Potsdam}, pages = {ii, 130}, year = {2014}, abstract = {Boolean constraint solving technology has made tremendous progress over the last decade, leading to industrial-strength solvers, for example, in the areas of answer set programming (ASP), the constraint satisfaction problem (CSP), propositional satisfiability (SAT) and satisfiability of quantified Boolean formulas (QBF). However, in all these areas, there exist multiple solving strategies that work well on different applications; no strategy dominates all other strategies. Therefore, no individual solver shows robust state-of-the-art performance in all kinds of applications. Additionally, the question arises how to choose a well-performing solving strategy for a given application; this is a challenging question even for solver and domain experts. One way to address this issue is the use of portfolio solvers, that is, a set of different solvers or solver configurations. We present three new automatic portfolio methods: (i) automatic construction of parallel portfolio solvers (ACPP) via algorithm configuration,(ii) solving the \$NP\$-hard problem of finding effective algorithm schedules with Answer Set Programming (aspeed), and (iii) a flexible algorithm selection framework (claspfolio2) allowing for fair comparison of different selection approaches. All three methods show improved performance and robustness in comparison to individual solvers on heterogeneous instance sets from many different applications. Since parallel solvers are important to effectively solve hard problems on parallel computation systems (e.g., multi-core processors), we extend all three approaches to be effectively applicable in parallel settings. We conducted extensive experimental studies different instance sets from ASP, CSP, MAXSAT, Operation Research (OR), SAT and QBF that indicate an improvement in the state-of-the-art solving heterogeneous instance sets. Last but not least, from our experimental studies, we deduce practical advice regarding the question when to apply which of our methods.}, language = {en} } @phdthesis{Ishebabi2010, author = {Ishebabi, Harold}, title = {Architecture synthesis for adaptive multiprocessor systems on chip}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41316}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {This thesis presents methods for automated synthesis of flexible chip multiprocessor systems from parallel programs targeted at FPGAs to exploit both task-level parallelism and architecture customization. Automated synthesis is necessitated by the complexity of the design space. A detailed description of the design space is provided in order to determine which parameters should be modeled to facilitate automated synthesis by optimizing a cost function, the emphasis being placed on inclusive modeling of parameters from application, architectural and physical subspaces, as well as their joint coverage in order to avoid pre-constraining the design space. Given a parallel program and a set of an IP library, the automated synthesis problem is to simultaneously (i) select processors (ii) map and schedule tasks to them, and (iii) select one or several networks for inter-task communications such that design constraints and optimization objectives are met. The research objective in this thesis is to find a suitable model for automated synthesis, and to evaluate methods of using the model for architectural optimizations. Our contributions are a holistic approach for the design of such systems, corresponding models to facilitate automated synthesis, evaluation of optimization methods using state of the art integer linear and answer set programming, as well as the development of synthesis heuristics to solve runtime challenges.}, language = {en} } @phdthesis{Harmeling2004, author = {Harmeling, Stefan}, title = {Independent component analysis and beyond}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0001540}, school = {Universit{\"a}t Potsdam}, year = {2004}, abstract = {'Independent component analysis' (ICA) ist ein Werkzeug der statistischen Datenanalyse und Signalverarbeitung, welches multivariate Signale in ihre Quellkomponenten zerlegen kann. Obwohl das klassische ICA Modell sehr n{\"u}tzlich ist, gibt es viele Anwendungen, die Erweiterungen von ICA erfordern. In dieser Dissertation pr{\"a}sentieren wir neue Verfahren, die die Funktionalit{\"a}t von ICA erweitern: (1) Zuverl{\"a}ssigkeitsanalyse und Gruppierung von unabh{\"a}ngigen Komponenten durch Hinzuf{\"u}gen von Rauschen, (2) robuste und {\"u}berbestimmte ('over-complete') ICA durch Ausreissererkennung, und (3) nichtlineare ICA mit Kernmethoden.}, language = {en} } @phdthesis{Konczak2007, author = {Konczak, Kathrin}, title = {Preferences in answer set programming}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12058}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {Answer Set Programming (ASP) emerged in the late 1990s as a new logic programming paradigm, having its roots in nonmonotonic reasoning, deductive databases, and logic programming with negation as failure. The basic idea of ASP is to represent a computational problem as a logic program whose answer sets correspond to solutions, and then to use an answer set solver for finding answer sets of the program. ASP is particularly suited for solving NP-complete search problems. Among these, we find applications to product configuration, diagnosis, and graph-theoretical problems, e.g. finding Hamiltonian cycles. On different lines of ASP research, many extensions of the basic formalism have been proposed. The most intensively studied one is the modelling of preferences in ASP. They constitute a natural and effective way of selecting preferred solutions among a plethora of solutions for a problem. For example, preferences have been successfully used for timetabling, auctioning, and product configuration. In this thesis, we concentrate on preferences within answer set programming. Among several formalisms and semantics for preference handling in ASP, we concentrate on ordered logic programs with the underlying D-, W-, and B-semantics. In this setting, preferences are defined among rules of a logic program. They select preferred answer sets among (standard) answer sets of the underlying logic program. Up to now, those preferred answer sets have been computed either via a compilation method or by meta-interpretation. Hence, the question comes up, whether and how preferences can be integrated into an existing ASP solver. To solve this question, we develop an operational graph-based framework for the computation of answer sets of logic programs. Then, we integrate preferences into this operational approach. We empirically observe that our integrative approach performs in most cases better than the compilation method or meta-interpretation. Another research issue in ASP are optimization methods that remove redundancies, as also found in database query optimizers. For these purposes, the rather recently suggested notion of strong equivalence for ASP can be used. If a program is strongly equivalent to a subprogram of itself, then one can always use the subprogram instead of the original program, a technique which serves as an effective optimization method. Up to now, strong equivalence has not been considered for logic programs with preferences. In this thesis, we tackle this issue and generalize the notion of strong equivalence to ordered logic programs. We give necessary and sufficient conditions for the strong equivalence of two ordered logic programs. Furthermore, we provide program transformations for ordered logic programs and show in how far preferences can be simplified. Finally, we present two new applications for preferences within answer set programming. First, we define new procedures for group decision making, which we apply to the problem of scheduling a group meeting. As a second new application, we reconstruct a linguistic problem appearing in German dialects within ASP. Regarding linguistic studies, there is an ongoing debate about how unique the rule systems of language are in human cognition. The reconstruction of grammatical regularities with tools from computer science has consequences for this debate: if grammars can be modelled this way, then they share core properties with other non-linguistic rule systems.}, language = {en} } @misc{Lunemann2006, type = {Master Thesis}, author = {Lunemann, Carolin}, title = {Quantum cryptography : security analysis of multiuser quantum communication with embedded authentication}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12756}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {Three quantum cryptographic protocols of multiuser quantum networks with embedded authentication, allowing quantum key distribution or quantum direct communication, are discussed in this work. The security of the protocols against different types of attacks is analysed with a focus on various impersonation attacks and the man-in-the-middle attack. On the basis of the security analyses several improvements are suggested and implemented in order to adjust the investigated vulnerabilities. Furthermore, the impact of the eavesdropping test procedure on impersonation attacks is outlined. The framework of a general eavesdropping test is proposed to provide additional protection against security risks in impersonation attacks.}, language = {en} } @phdthesis{Ziehe2005, author = {Ziehe, Andreas}, title = {Blind source separation based on joint diagonalization of matrices with applications in biomedical signal processing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-5694}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {This thesis is concerned with the solution of the blind source separation problem (BSS). The BSS problem occurs frequently in various scientific and technical applications. In essence, it consists in separating meaningful underlying components out of a mixture of a multitude of superimposed signals. In the recent research literature there are two related approaches to the BSS problem: The first is known as Independent Component Analysis (ICA), where the goal is to transform the data such that the components become as independent as possible. The second is based on the notion of diagonality of certain characteristic matrices derived from the data. Here the goal is to transform the matrices such that they become as diagonal as possible. In this thesis we study the latter method of approximate joint diagonalization (AJD) to achieve a solution of the BSS problem. After an introduction to the general setting, the thesis provides an overview on particular choices for the set of target matrices that can be used for BSS by joint diagonalization. As the main contribution of the thesis, new algorithms for approximate joint diagonalization of several matrices with non-orthogonal transformations are developed. These newly developed algorithms will be tested on synthetic benchmark datasets and compared to other previous diagonalization algorithms. Applications of the BSS methods to biomedical signal processing are discussed and exemplified with real-life data sets of multi-channel biomagnetic recordings.}, subject = {Signaltrennung}, language = {en} } @phdthesis{Floeter2005, author = {Fl{\"o}ter, Andr{\´e}}, title = {Analyzing biological expression data based on decision tree induction}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-6416}, school = {Universit{\"a}t Potsdam}, year = {2005}, abstract = {Modern biological analysis techniques supply scientists with various forms of data. One category of such data are the so called "expression data". These data indicate the quantities of biochemical compounds present in tissue samples. Recently, expression data can be generated at a high speed. This leads in turn to amounts of data no longer analysable by classical statistical techniques. Systems biology is the new field that focuses on the modelling of this information. At present, various methods are used for this purpose. One superordinate class of these meth­ods is machine learning. Methods of this kind had, until recently, predominantly been used for classification and prediction tasks. This neglected a powerful secondary benefit: the ability to induce interpretable models. Obtaining such models from data has become a key issue within Systems biology. Numerous approaches have been proposed and intensively discussed. This thesis focuses on the examination and exploitation of one basic technique: decision trees. The concept of comparing sets of decision trees is developed. This method offers the pos­sibility of identifying significant thresholds in continuous or discrete valued attributes through their corresponding set of decision trees. Finding significant thresholds in attributes is a means of identifying states in living organisms. Knowing about states is an invaluable clue to the un­derstanding of dynamic processes in organisms. Applied to metabolite concentration data, the proposed method was able to identify states which were not found with conventional techniques for threshold extraction. A second approach exploits the structure of sets of decision trees for the discovery of com­binatorial dependencies between attributes. Previous work on this issue has focused either on expensive computational methods or the interpretation of single decision trees ­ a very limited exploitation of the data. This has led to incomplete or unstable results. That is why a new method is developed that uses sets of decision trees to overcome these limitations. Both the introduced methods are available as software tools. They can be applied consecu­tively or separately. That way they make up a package of analytical tools that usefully supplement existing methods. By means of these tools, the newly introduced methods were able to confirm existing knowl­edge and to suggest interesting and new relationships between metabolites.}, subject = {Molekulare Bioinformatik}, language = {en} } @phdthesis{Semmo2016, author = {Semmo, Amir}, title = {Design and implementation of non-photorealistic rendering techniques for 3D geospatial data}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-99525}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 155}, year = {2016}, abstract = {Geospatial data has become a natural part of a growing number of information systems and services in the economy, society, and people's personal lives. In particular, virtual 3D city and landscape models constitute valuable information sources within a wide variety of applications such as urban planning, navigation, tourist information, and disaster management. Today, these models are often visualized in detail to provide realistic imagery. However, a photorealistic rendering does not automatically lead to high image quality, with respect to an effective information transfer, which requires important or prioritized information to be interactively highlighted in a context-dependent manner. Approaches in non-photorealistic renderings particularly consider a user's task and camera perspective when attempting optimal expression, recognition, and communication of important or prioritized information. However, the design and implementation of non-photorealistic rendering techniques for 3D geospatial data pose a number of challenges, especially when inherently complex geometry, appearance, and thematic data must be processed interactively. Hence, a promising technical foundation is established by the programmable and parallel computing architecture of graphics processing units. This thesis proposes non-photorealistic rendering techniques that enable both the computation and selection of the abstraction level of 3D geospatial model contents according to user interaction and dynamically changing thematic information. To achieve this goal, the techniques integrate with hardware-accelerated rendering pipelines using shader technologies of graphics processing units for real-time image synthesis. The techniques employ principles of artistic rendering, cartographic generalization, and 3D semiotics—unlike photorealistic rendering—to synthesize illustrative renditions of geospatial feature type entities such as water surfaces, buildings, and infrastructure networks. In addition, this thesis contributes a generic system that enables to integrate different graphic styles—photorealistic and non-photorealistic—and provide their seamless transition according to user tasks, camera view, and image resolution. Evaluations of the proposed techniques have demonstrated their significance to the field of geospatial information visualization including topics such as spatial perception, cognition, and mapping. In addition, the applications in illustrative and focus+context visualization have reflected their potential impact on optimizing the information transfer regarding factors such as cognitive load, integration of non-realistic information, visualization of uncertainty, and visualization on small displays.}, language = {en} } @phdthesis{Kyprianidis2013, author = {Kyprianidis, Jan Eric}, title = {Structure adaptive stylization of images and video}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64104}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {In the early days of computer graphics, research was mainly driven by the goal to create realistic synthetic imagery. By contrast, non-photorealistic computer graphics, established as its own branch of computer graphics in the early 1990s, is mainly motivated by concepts and principles found in traditional art forms, such as painting, illustration, and graphic design, and it investigates concepts and techniques that abstract from reality using expressive, stylized, or illustrative rendering techniques. This thesis focuses on the artistic stylization of two-dimensional content and presents several novel automatic techniques for the creation of simplified stylistic illustrations from color images, video, and 3D renderings. Primary innovation of these novel techniques is that they utilize the smooth structure tensor as a simple and efficient way to obtain information about the local structure of an image. More specifically, this thesis contributes to knowledge in this field in the following ways. First, a comprehensive review of the structure tensor is provided. In particular, different methods for integrating the minor eigenvector field of the smoothed structure tensor are developed, and the superiority of the smoothed structure tensor over the popular edge tangent flow is demonstrated. Second, separable implementations of the popular bilateral and difference of Gaussians filters that adapt to the local structure are presented. These filters avoid artifacts while being computationally highly efficient. Taken together, both provide an effective way to create a cartoon-style effect. Third, a generalization of the Kuwahara filter is presented that avoids artifacts by adapting the shape, scale, and orientation of the filter to the local structure. This causes directional image features to be better preserved and emphasized, resulting in overall sharper edges and a more feature-abiding painterly effect. In addition to the single-scale variant, a multi-scale variant is presented, which is capable of performing a highly aggressive abstraction. Fourth, a technique that builds upon the idea of combining flow-guided smoothing with shock filtering is presented, allowing for an aggressive exaggeration and an emphasis of directional image features. All presented techniques are suitable for temporally coherent per-frame filtering of video or dynamic 3D renderings, without requiring expensive extra processing, such as optical flow. Moreover, they can be efficiently implemented to process content in real-time on a GPU.}, language = {en} } @phdthesis{Prohaska2007, author = {Prohaska, Steffen}, title = {Skeleton-based visualization of massive voxel objects with network-like architecture}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-14888}, school = {Universit{\"a}t Potsdam}, year = {2007}, abstract = {This work introduces novel internal and external memory algorithms for computing voxel skeletons of massive voxel objects with complex network-like architecture and for converting these voxel skeletons to piecewise linear geometry, that is triangle meshes and piecewise straight lines. The presented techniques help to tackle the challenge of visualizing and analyzing 3d images of increasing size and complexity, which are becoming more and more important in, for example, biological and medical research. Section 2.3.1 contributes to the theoretical foundations of thinning algorithms with a discussion of homotopic thinning in the grid cell model. The grid cell model explicitly represents a cell complex built of faces, edges, and vertices shared between voxels. A characterization of pairs of cells to be deleted is much simpler than characterizations of simple voxels were before. The grid cell model resolves topologically unclear voxel configurations at junctions and locked voxel configurations causing, for example, interior voxels in sets of non-simple voxels. A general conclusion is that the grid cell model is superior to indecomposable voxels for algorithms that need detailed control of topology. Section 2.3.2 introduces a noise-insensitive measure based on the geodesic distance along the boundary to compute two-dimensional skeletons. The measure is able to retain thin object structures if they are geometrically important while ignoring noise on the object's boundary. This combination of properties is not known of other measures. The measure is also used to guide erosion in a thinning process from the boundary towards lines centered within plate-like structures. Geodesic distance based quantities seem to be well suited to robustly identify one- and two-dimensional skeletons. Chapter 6 applies the method to visualization of bone micro-architecture. Chapter 3 describes a novel geometry generation scheme for representing voxel skeletons, which retracts voxel skeletons to piecewise linear geometry per dual cube. The generated triangle meshes and graphs provide a link to geometry processing and efficient rendering of voxel skeletons. The scheme creates non-closed surfaces with boundaries, which contain fewer triangles than a representation of voxel skeletons using closed surfaces like small cubes or iso-surfaces. A conclusion is that thinking specifically about voxel skeleton configurations instead of generic voxel configurations helps to deal with the topological implications. The geometry generation is one foundation of the applications presented in Chapter 6. Chapter 5 presents a novel external memory algorithm for distance ordered homotopic thinning. The presented method extends known algorithms for computing chamfer distance transformations and thinning to execute I/O-efficiently when input is larger than the available main memory. The applied block-wise decomposition schemes are quite simple. Yet it was necessary to carefully analyze effects of block boundaries to devise globally correct external memory variants of known algorithms. In general, doing so is superior to naive block-wise processing ignoring boundary effects. Chapter 6 applies the algorithms in a novel method based on confocal microscopy for quantitative study of micro-vascular networks in the field of microcirculation.}, language = {en} } @phdthesis{AbdelwahabHusseinAbdelwahabElsayed2019, author = {Abdelwahab Hussein Abdelwahab Elsayed, Ahmed}, title = {Probabilistic, deep, and metric learning for biometric identification from eye movements}, doi = {10.25932/publishup-46798}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-467980}, school = {Universit{\"a}t Potsdam}, pages = {vi, 65}, year = {2019}, abstract = {A central insight from psychological studies on human eye movements is that eye movement patterns are highly individually characteristic. They can, therefore, be used as a biometric feature, that is, subjects can be identified based on their eye movements. This thesis introduces new machine learning methods to identify subjects based on their eye movements while viewing arbitrary content. The thesis focuses on probabilistic modeling of the problem, which has yielded the best results in the most recent literature. The thesis studies the problem in three phases by proposing a purely probabilistic, probabilistic deep learning, and probabilistic deep metric learning approach. In the first phase, the thesis studies models that rely on psychological concepts about eye movements. Recent literature illustrates that individual-specific distributions of gaze patterns can be used to accurately identify individuals. In these studies, models were based on a simple parametric family of distributions. Such simple parametric models can be robustly estimated from sparse data, but have limited flexibility to capture the differences between individuals. Therefore, this thesis proposes a semiparametric model of gaze patterns that is flexible yet robust for individual identification. These patterns can be understood as domain knowledge derived from psychological literature. Fixations and saccades are examples of simple gaze patterns. The proposed semiparametric densities are drawn under a Gaussian process prior centered at a simple parametric distribution. Thus, the model will stay close to the parametric class of densities if little data is available, but it can also deviate from this class if enough data is available, increasing the flexibility of the model. The proposed method is evaluated on a large-scale dataset, showing significant improvements over the state-of-the-art. Later, the thesis replaces the model based on gaze patterns derived from psychological concepts with a deep neural network that can learn more informative and complex patterns from raw eye movement data. As previous work has shown that the distribution of these patterns across a sequence is informative, a novel statistical aggregation layer called the quantile layer is introduced. It explicitly fits the distribution of deep patterns learned directly from the raw eye movement data. The proposed deep learning approach is end-to-end learnable, such that the deep model learns to extract informative, short local patterns while the quantile layer learns to approximate the distributions of these patterns. Quantile layers are a generic approach that can converge to standard pooling layers or have a more detailed description of the features being pooled, depending on the problem. The proposed model is evaluated in a large-scale study using the eye movements of subjects viewing arbitrary visual input. The model improves upon the standard pooling layers and other statistical aggregation layers proposed in the literature. It also improves upon the state-of-the-art eye movement biometrics by a wide margin. Finally, for the model to identify any subject — not just the set of subjects it is trained on — a metric learning approach is developed. Metric learning learns a distance function over instances. The metric learning model maps the instances into a metric space, where sequences of the same individual are close, and sequences of different individuals are further apart. This thesis introduces a deep metric learning approach with distributional embeddings. The approach represents sequences as a set of continuous distributions in a metric space; to achieve this, a new loss function based on Wasserstein distances is introduced. The proposed method is evaluated on multiple domains besides eye movement biometrics. This approach outperforms the state of the art in deep metric learning in several domains while also outperforming the state of the art in eye movement biometrics.}, language = {en} } @misc{Fandinno2019, author = {Fandinno, Jorge}, title = {Founded (auto)epistemic equilibrium logic satisfies epistemic splitting}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1060}, issn = {1866-8372}, doi = {10.25932/publishup-46968}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469685}, pages = {671 -- 687}, year = {2019}, abstract = {In a recent line of research, two familiar concepts from logic programming semantics (unfounded sets and splitting) were extrapolated to the case of epistemic logic programs. The property of epistemic splitting provides a natural and modular way to understand programs without epistemic cycles but, surprisingly, was only fulfilled by Gelfond's original semantics (G91), among the many proposals in the literature. On the other hand, G91 may suffer from a kind of self-supported, unfounded derivations when epistemic cycles come into play. Recently, the absence of these derivations was also formalised as a property of epistemic semantics called foundedness. Moreover, a first semantics proved to satisfy foundedness was also proposed, the so-called Founded Autoepistemic Equilibrium Logic (FAEEL). In this paper, we prove that FAEEL also satisfies the epistemic splitting property something that, together with foundedness, was not fulfilled by any other approach up to date. To prove this result, we provide an alternative characterisation of FAEEL as a combination of G91 with a simpler logic we called Founded Epistemic Equilibrium Logic (FEEL), which is somehow an extrapolation of the stable model semantics to the modal logic S5.}, language = {en} } @misc{AguadoCabalarFandinnoetal.2019, author = {Aguado, Felicidad and Cabalar, Pedro and Fandinno, Jorge and Pearce, David and Perez, Gilberto and Vidal, Concepcion}, title = {Revisiting explicit negation in answer set programming}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1104}, issn = {1866-8372}, doi = {10.25932/publishup-46969}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469697}, pages = {908 -- 924}, year = {2019}, abstract = {A common feature in Answer Set Programming is the use of a second negation, stronger than default negation and sometimes called explicit, strong or classical negation. This explicit negation is normally used in front of atoms, rather than allowing its use as a regular operator. In this paper we consider the arbitrary combination of explicit negation with nested expressions, as those defined by Lifschitz, Tang and Turner. We extend the concept of reduct for this new syntax and then prove that it can be captured by an extension of Equilibrium Logic with this second negation. We study some properties of this variant and compare to the already known combination of Equilibrium Logic with Nelson's strong negation.}, language = {en} } @misc{AfantenosPeldszusStede2018, author = {Afantenos, Stergos and Peldszus, Andreas and Stede, Manfred}, title = {Comparing decoding mechanisms for parsing argumentative structures}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1062}, issn = {1866-8372}, doi = {10.25932/publishup-47052}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470527}, pages = {18}, year = {2018}, abstract = {Parsing of argumentative structures has become a very active line of research in recent years. Like discourse parsing or any other natural language task that requires prediction of linguistic structures, most approaches choose to learn a local model and then perform global decoding over the local probability distributions, often imposing constraints that are specific to the task at hand. Specifically for argumentation parsing, two decoding approaches have been recently proposed: Minimum Spanning Trees (MST) and Integer Linear Programming (ILP), following similar trends in discourse parsing. In contrast to discourse parsing though, where trees are not always used as underlying annotation schemes, argumentation structures so far have always been represented with trees. Using the 'argumentative microtext corpus' [in: Argumentation and Reasoned Action: Proceedings of the 1st European Conference on Argumentation, Lisbon 2015 / Vol. 2, College Publications, London, 2016, pp. 801-815] as underlying data and replicating three different decoding mechanisms, in this paper we propose a novel ILP decoder and an extension to our earlier MST work, and then thoroughly compare the approaches. The result is that our new decoder outperforms related work in important respects, and that in general, ILP and MST yield very similar performance.}, language = {en} } @misc{Strickroth2019, author = {Strickroth, Sven}, title = {PLATON}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {804}, issn = {1866-8372}, doi = {10.25932/publishup-44188}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441887}, pages = {28}, year = {2019}, abstract = {Lesson planning is both an important and demanding task—especially as part of teacher training. This paper presents the requirements for a lesson planning system and evaluates existing systems regarding these requirements. One major drawback of existing software tools is that most are limited to a text- or form-based representation of the lesson designs. In this article, a new approach with a graphical, time-based representation with (automatic) analyses methods is proposed and the system architecture and domain model are described in detail. The approach is implemented in an interactive, web-based prototype called PLATON, which additionally supports the management of lessons in units as well as the modelling of teacher and student-generated resources. The prototype was evaluated in a study with 61 prospective teachers (bachelor's and master's preservice teachers as well as teacher trainees in post-university teacher training) in Berlin, Germany, with a focus on usability. The results show that this approach proofed usable for lesson planning and offers positive effects for the perception of time and self-reflection.}, language = {en} } @misc{EbertLamprechtSteffenetal.2012, author = {Ebert, Birgitta E. and Lamprecht, Anna-Lena and Steffen, Bernhard and Blank, Lars M.}, title = {Flux-P}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1054}, issn = {1866-8372}, doi = {10.25932/publishup-47669}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476696}, pages = {872 -- 890}, year = {2012}, abstract = {Quantitative knowledge of intracellular fluxes in metabolic networks is invaluable for inferring metabolic system behavior and the design principles of biological systems. However, intracellular reaction rates can not often be calculated directly but have to be estimated; for instance, via 13C-based metabolic flux analysis, a model-based interpretation of stable carbon isotope patterns in intermediates of metabolism. Existing software such as FiatFlux, OpenFLUX or 13CFLUX supports experts in this complex analysis, but requires several steps that have to be carried out manually, hence restricting the use of this software for data interpretation to a rather small number of experiments. In this paper, we present Flux-P as an approach to automate and standardize 13C-based metabolic flux analysis, using the Bio-jETI workflow framework. Exemplarily based on the FiatFlux software, it demonstrates how services can be created that carry out the different analysis steps autonomously and how these can subsequently be assembled into software workflows that perform automated, high-throughput intracellular flux analysis of high quality and reproducibility. Besides significant acceleration and standardization of the data analysis, the agile workflow-based realization supports flexible changes of the analysis workflows on the user level, making it easy to perform custom analyses.}, language = {en} } @phdthesis{Seuring2000, author = {Seuring, Markus}, title = {Output space compaction for testing and concurrent checking}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000165}, school = {Universit{\"a}t Potsdam}, year = {2000}, abstract = {In der Dissertation werden neue Entwurfsmethoden f{\"u}r Kompaktoren f{\"u}r die Ausg{\"a}nge von digitalen Schaltungen beschrieben, die die Anzahl der zu testenden Ausg{\"a}nge drastisch verkleinern und dabei die Testbarkeit der Schaltungen nur wenig oder gar nicht verschlechtern. Der erste Teil der Arbeit behandelt f{\"u}r kombinatorische Schaltungen Methoden, die die Struktur der Schaltungen beim Entwurf der Kompaktoren ber{\"u}cksichtigen. Verschiedene Algorithmen zur Analyse von Schaltungsstrukturen werden zum ersten Mal vorgestellt und untersucht. Die Komplexit{\"a}t der vorgestellten Verfahren zur Erzeugung von Kompaktoren ist linear bez{\"u}glich der Anzahl der Gatter in der Schaltung und ist damit auf sehr große Schaltungen anwendbar. Im zweiten Teil wird erstmals ein solches Verfahren f{\"u}r sequentielle Schaltkreise beschrieben. Dieses Verfahren baut im wesentlichen auf das erste auf. Der dritte Teil beschreibt eine Entwurfsmethode, die keine Informationen {\"u}ber die interne Struktur der Schaltung oder {\"u}ber das zugrundeliegende Fehlermodell ben{\"o}tigt. Der Entwurf basiert alleine auf einem vorgegebenen Satz von Testvektoren und die dazugeh{\"o}renden Testantworten der fehlerfreien Schaltung. Ein nach diesem Verfahren erzeugter Kompaktor maskiert keinen der Fehler, die durch das Testen mit den vorgegebenen Vektoren an den Ausg{\"a}ngen der Schaltung beobachtbar sind.}, language = {en} } @phdthesis{Buchholz2006, author = {Buchholz, Henrik}, title = {Real-time visualization of 3D city models}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13337}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {An increasing number of applications requires user interfaces that facilitate the handling of large geodata sets. Using virtual 3D city models, complex geospatial information can be communicated visually in an intuitive way. Therefore, real-time visualization of virtual 3D city models represents a key functionality for interactive exploration, presentation, analysis, and manipulation of geospatial data. This thesis concentrates on the development and implementation of concepts and techniques for real-time city model visualization. It discusses rendering algorithms as well as complementary modeling concepts and interaction techniques. Particularly, the work introduces a new real-time rendering technique to handle city models of high complexity concerning texture size and number of textures. Such models are difficult to handle by current technology, primarily due to two problems: - Limited texture memory: The amount of simultaneously usable texture data is limited by the memory of the graphics hardware. - Limited number of textures: Using several thousand different textures simultaneously causes significant performance problems due to texture switch operations during rendering. The multiresolution texture atlases approach, introduced in this thesis, overcomes both problems. During rendering, it permanently maintains a small set of textures that are sufficient for the current view and the screen resolution available. The efficiency of multiresolution texture atlases is evaluated in performance tests. To summarize, the results demonstrate that the following goals have been achieved: - Real-time rendering becomes possible for 3D scenes whose amount of texture data exceeds the main memory capacity. - Overhead due to texture switches is kept permanently low, so that the number of different textures has no significant effect on the rendering frame rate. Furthermore, this thesis introduces two new approaches for real-time city model visualization that use textures as core visualization elements: - An approach for visualization of thematic information. - An approach for illustrative visualization of 3D city models. Both techniques demonstrate that multiresolution texture atlases provide a basic functionality for the development of new applications and systems in the domain of city model visualization.}, language = {en} } @phdthesis{Trapp2013, author = {Trapp, Matthias}, title = {Interactive rendering techniques for focus+context visualization of 3D geovirtual environments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66824}, school = {Universit{\"a}t Potsdam}, year = {2013}, abstract = {This thesis introduces a collection of new real-time rendering techniques and applications for focus+context visualization of interactive 3D geovirtual environments such as virtual 3D city and landscape models. These environments are generally characterized by a large number of objects and are of high complexity with respect to geometry and textures. For these reasons, their interactive 3D rendering represents a major challenge. Their 3D depiction implies a number of weaknesses such as occlusions, cluttered image contents, and partial screen-space usage. To overcome these limitations and, thus, to facilitate the effective communication of geo-information, principles of focus+context visualization can be used for the design of real-time 3D rendering techniques for 3D geovirtual environments (see Figure). In general, detailed views of a 3D geovirtual environment are combined seamlessly with abstracted views of the context within a single image. To perform the real-time image synthesis required for interactive visualization, dedicated parallel processors (GPUs) for rasterization of computer graphics primitives are used. For this purpose, the design and implementation of appropriate data structures and rendering pipelines are necessary. The contribution of this work comprises the following five real-time rendering methods: • The rendering technique for 3D generalization lenses enables the combination of different 3D city geometries (e.g., generalized versions of a 3D city model) in a single image in real time. The method is based on a generalized and fragment-precise clipping approach, which uses a compressible, raster-based data structure. It enables the combination of detailed views in the focus area with the representation of abstracted variants in the context area. • The rendering technique for the interactive visualization of dynamic raster data in 3D geovirtual environments facilitates the rendering of 2D surface lenses. It enables a flexible combination of different raster layers (e.g., aerial images or videos) using projective texturing for decoupling image and geometry data. Thus, various overlapping and nested 2D surface lenses of different contents can be visualized interactively. • The interactive rendering technique for image-based deformation of 3D geovirtual environments enables the real-time image synthesis of non-planar projections, such as cylindrical and spherical projections, as well as multi-focal 3D fisheye-lenses and the combination of planar and non-planar projections. • The rendering technique for view-dependent multi-perspective views of 3D geovirtual environments, based on the application of global deformations to the 3D scene geometry, can be used for synthesizing interactive panorama maps to combine detailed views close to the camera (focus) with abstract views in the background (context). This approach reduces occlusions, increases the usage the available screen space, and reduces the overload of image contents. • The object-based and image-based rendering techniques for highlighting objects and focus areas inside and outside the view frustum facilitate preattentive perception. The concepts and implementations of interactive image synthesis for focus+context visualization and their selected applications enable a more effective communication of spatial information, and provide building blocks for design and development of new applications and systems in the field of 3D geovirtual environments.}, language = {en} } @phdthesis{Ostrowski2018, author = {Ostrowski, Max}, title = {Modern constraint answer set solving}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407799}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2018}, abstract = {Answer Set Programming (ASP) is a declarative problem solving approach, combining a rich yet simple modeling language with high-performance solving capabilities. Although this has already resulted in various applications, certain aspects of such applications are more naturally modeled using variables over finite domains, for accounting for resources, fine timings, coordinates, or functions. Our goal is thus to extend ASP with constraints over integers while preserving its declarative nature. This allows for fast prototyping and elaboration tolerant problem descriptions of resource related applications. The resulting paradigm is called Constraint Answer Set Programming (CASP). We present three different approaches for solving CASP problems. The first one, a lazy, modular approach combines an ASP solver with an external system for handling constraints. This approach has the advantage that two state of the art technologies work hand in hand to solve the problem, each concentrating on its part of the problem. The drawback is that inter-constraint dependencies cannot be communicated back to the ASP solver, impeding its learning algorithm. The second approach translates all constraints to ASP. Using the appropriate encoding techniques, this results in a very fast, monolithic system. Unfortunately, due to the large, explicit representation of constraints and variables, translation techniques are restricted to small and mid-sized domains. The third approach merges the lazy and the translational approach, combining the strength of both while removing their weaknesses. To this end, we enhance the dedicated learning techniques of an ASP solver with the inferences of the translating approach in a lazy way. That is, the important knowledge is only made explicit when needed. By using state of the art techniques from neighboring fields, we provide ways to tackle real world, industrial size problems. By extending CASP to reactive solving, we open up new application areas such as online planning with continuous domains and durations.}, language = {en} } @phdthesis{Smirnov2011, author = {Smirnov, Sergey}, title = {Business process model abstraction}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60258}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Business process models are used within a range of organizational initiatives, where every stakeholder has a unique perspective on a process and demands the respective model. As a consequence, multiple process models capturing the very same business process coexist. Keeping such models in sync is a challenge within an ever changing business environment: once a process is changed, all its models have to be updated. Due to a large number of models and their complex relations, model maintenance becomes error-prone and expensive. Against this background, business process model abstraction emerged as an operation reducing the number of stored process models and facilitating model management. Business process model abstraction is an operation preserving essential process properties and leaving out insignificant details in order to retain information relevant for a particular purpose. Process model abstraction has been addressed by several researchers. The focus of their studies has been on particular use cases and model transformations supporting these use cases. This thesis systematically approaches the problem of business process model abstraction shaping the outcome into a framework. We investigate the current industry demand in abstraction summarizing it in a catalog of business process model abstraction use cases. The thesis focuses on one prominent use case where the user demands a model with coarse-grained activities and overall process ordering constraints. We develop model transformations that support this use case starting with the transformations based on process model structure analysis. Further, abstraction methods considering the semantics of process model elements are investigated. First, we suggest how semantically related activities can be discovered in process models-a barely researched challenge. The thesis validates the designed abstraction methods against sets of industrial process models and discusses the method implementation aspects. Second, we develop a novel model transformation, which combined with the related activity discovery allows flexible non-hierarchical abstraction. In this way this thesis advocates novel model transformations that facilitate business process model management and provides the foundations for innovative tool support.}, language = {en} } @phdthesis{Mahr2012, author = {Mahr, Philipp}, title = {Resource efficient communication in network-based reconfigurable on-chip systems}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59914}, school = {Universit{\"a}t Potsdam}, year = {2012}, abstract = {The constantly growing capacity of reconfigurable devices allows simultaneous execution of complex applications on those devices. The mere diversity of applications deems it impossible to design an interconnection network matching the requirements of every possible application perfectly, leading to suboptimal performance in many cases. However, the architecture of the interconnection network is not the only aspect affecting performance of communication. The resource manager places applications on the device and therefore influences latency between communicating partners and overall network load. Communication protocols affect performance by introducing data and processing overhead putting higher load on the network and increasing resource demand. Approaching communication holistically not only considers the architecture of the interconnect, but communication-aware resource management, communication protocols and resource usage just as well. Incorporation of different parts of a reconfigurable system during design- and runtime and optimizing them with respect to communication demand results in more resource efficient communication. Extensive evaluation shows enhanced performance and flexibility, if communication on reconfigurable devices is regarded in a holistic fashion.}, language = {en} } @phdthesis{Gebser2011, author = {Gebser, Martin}, title = {Proof theory and algorithms for answer set programming}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-55425}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Answer Set Programming (ASP) is an emerging paradigm for declarative programming, in which a computational problem is specified by a logic program such that particular models, called answer sets, match solutions. ASP faces a growing range of applications, demanding for high-performance tools able to solve complex problems. ASP integrates ideas from a variety of neighboring fields. In particular, automated techniques to search for answer sets are inspired by Boolean Satisfiability (SAT) solving approaches. While the latter have firm proof-theoretic foundations, ASP lacks formal frameworks for characterizing and comparing solving methods. Furthermore, sophisticated search patterns of modern SAT solvers, successfully applied in areas like, e.g., model checking and verification, are not yet established in ASP solving. We address these deficiencies by, for one, providing proof-theoretic frameworks that allow for characterizing, comparing, and analyzing approaches to answer set computation. For another, we devise modern ASP solving algorithms that integrate and extend state-of-the-art techniques for Boolean constraint solving. We thus contribute to the understanding of existing ASP solving approaches and their interconnections as well as to their enhancement by incorporating sophisticated search patterns. The central idea of our approach is to identify atomic as well as composite constituents of a propositional logic program with Boolean variables. This enables us to describe fundamental inference steps, and to selectively combine them in proof-theoretic characterizations of various ASP solving methods. In particular, we show that different concepts of case analyses applied by existing ASP solvers implicate mutual exponential separations regarding their best-case complexities. We also develop a generic proof-theoretic framework amenable to language extensions, and we point out that exponential separations can likewise be obtained due to case analyses on them. We further exploit fundamental inference steps to derive Boolean constraints characterizing answer sets. They enable the conception of ASP solving algorithms including search patterns of modern SAT solvers, while also allowing for direct technology transfers between the areas of ASP and SAT solving. Beyond the search for one answer set of a logic program, we address the enumeration of answer sets and their projections to a subvocabulary, respectively. The algorithms we develop enable repetition-free enumeration in polynomial space without being intrusive, i.e., they do not necessitate any modifications of computations before an answer set is found. Our approach to ASP solving is implemented in clasp, a state-of-the-art Boolean constraint solver that has successfully participated in recent solver competitions. Although we do here not address the implementation techniques of clasp or all of its features, we present the principles of its success in the context of ASP solving.}, language = {en} } @article{LewinMcNicol2015, author = {Lewin, Cathy and McNicol, Sarah}, title = {Supporting the Development of 21st Century Skills through ICT}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82672}, pages = {181 -- 198}, year = {2015}, abstract = {The growing impact of globalisation and the development of a 'knowledge society' have led many to argue that 21st century skills are essential for life in twenty-first century society and that ICT is central to their development. This paper describes how 21st century skills, in particular digital literacy, critical thinking, creativity, communication and collaboration skills, have been conceptualised and embedded in the resources developed for teachers in iTEC, a four-year, European project. The effectiveness of this approach is considered in light of the data collected through the evaluation of the pilots, which considers both the potential benefits of using technology to support the development of 21st century skills, but also the challenges of doing so. Finally, the paper discusses the learning support systems required in order to transform pedagogies and embed 21st century skills. It is argued that support is required in standards and assessment; curriculum and instruction; professional development; and learning environments.}, language = {en} } @article{MagenheimNellesNeugebaueretal.2015, author = {Magenheim, Johannes and Nelles, Wolfgang and Neugebauer, Jonas and Ohrndorf, Laura and Schaper, Niclas and Schubert, Sigrid}, title = {Expert Rating of Competence Levels in Upper Secondary Computer Science Education}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82683}, pages = {199 -- 216}, year = {2015}, abstract = {In the project MoKoM, which is funded by the German Research Foundation (DFG) from 2008 to 2012, a test instrument measuring students' competences in computer science was developed. This paper presents the results of an expert rating of the levels of students' competences done for the items of the instrument. At first we will describe the difficulty-relevant features that were used for the evaluation. These were deduced from computer science, psychological and didactical findings and resources. Potentials and desiderata of this research method are discussed further on. Finally we will present our conclusions on the results and give an outlook on further steps.}, language = {en} } @article{OpelKramerTrommenetal.2015, author = {Opel, Simone and Kramer, Matthias and Trommen, Michael and Pottb{\"a}cker, Florian and Ilaghef, Youssef}, title = {BugHunt}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82693}, pages = {217 -- 233}, year = {2015}, abstract = {Competencies related to operating systems and computer security are usually taught systematically. In this paper we present a different approach, in which students have to remove virus-like behaviour on their respective computers, which has been induced by software developed for this purpose. They have to develop appropriate problem-solving strategies and thereby explore essential elements of the operating system. The approach was implemented exemplarily in two computer science courses at a regional general upper secondary school and showed great motivation and interest in the participating students.}, language = {en} } @article{PassigTzurielKedmi2015, author = {Passig, David and Tzuriel, David and Kedmi, Ganit Eshel}, title = {Improving children's Cognitive Modifiability through Mediated Learning and Dynamic Assessment within 3D Immersive Virtual Reality Environment}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82705}, pages = {235 -- 252}, year = {2015}, abstract = {The objectives of this study were to examine (a) the effect of dynamic assessment (DA) in a 3D Immersive Virtual Reality (IVR) environment as compared with computerized 2D and noncomputerized (NC) situations on cognitive modifiability, and (b) the transfer effects of these conditions on more difficult problem solving administered two weeks later in a non-computerized environment. A sample of 117 children aged 6:6-9:0 years were randomly assigned into three experimental groups of DA conditions: 3D, 2D, and NC, and one control group (C). All groups received the pre- and post-teaching Analogies subtest of the Cognitive Modifiability Battery (CMB-AN). The experimental groups received a teaching phase in conditions similar to the pre-and post-teaching phases. The findings showed that cognitive modifiability, in a 3D IVR, was distinctively higher than in the two other experimental groups (2D computer group and NC group). It was also found that the 3D group showed significantly higher performance in transfer problems than the 2D and NC groups.}, language = {en} } @article{Saito2015, author = {Saito, Toshinori}, title = {The Key Competencies in Informatics and ICT viewed from Nussbaum's Ten Central Capabilities}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82718}, pages = {253 -- 266}, year = {2015}, abstract = {This article shows a discussion about the key competencies in informatics and ICT viewed from a philosophical foundation presented by Martha Nussbaum, which is known as 'ten central capabilities'. Firstly, the outline of 'The Capability Approach', which has been presented by Amartya Sen and Nussbaum as a theoretical framework of assessing the state of social welfare, will be explained. Secondly, the body of Nussbaum's ten central capabilities and the reason for being applied as the basis of discussion will be shown. Thirdly, the relationship between the concept of 'capability' and 'competency' is to be discussed. After that, the author's assumption of the key competencies in informatics and ICT led from the examination of Nussbaum's ten capabilities will be presented.}, language = {en} } @article{Webb2015, author = {Webb, Mary}, title = {Considerations for the Design of Computing Curricula}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82723}, pages = {267 -- 283}, year = {2015}, abstract = {This paper originated from discussions about the need for important changes in the curriculum for Computing including two focus group meetings at IFIP conferences over the last two years. The paper examines how recent developments in curriculum, together with insights from curriculum thinking in other subject areas, especially mathematics and science, can inform curriculum design for Computing. The analysis presented in the paper provides insights into the complexity of curriculum design as well as identifying important constraints and considerations for the ongoing development of a vision and framework for a Computing curriculum.}, language = {en} } @article{Curzon2015, author = {Curzon, Paul}, title = {Unplugged Computational Thinking for Fun}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82575}, pages = {15 -- 27}, year = {2015}, abstract = {Computational thinking is a fundamental skill set that is learned by studying Informatics and ICT. We argue that its core ideas can be introduced in an inspiring and integrated way to both teachers and students using fun and contextually rich cs4fn 'Computer Science for Fun' stories combined with 'unplugged' activities including games and magic tricks. We also argue that understanding people is an important part of computational thinking. Computational thinking can be fun for everyone when taught in kinaesthetic ways away from technology.}, language = {en} } @article{Kalas2015, author = {Kalas, Ivan}, title = {Programming at Pre-primary and Primary Levels}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82587}, pages = {29 -- 31}, year = {2015}, language = {en} } @article{MagenheimSchubertSchapert2015, author = {Magenheim, Johannes and Schubert, Sigrid and Schapert, Niclas}, title = {Modelling and Measurement of Competencies in Computer Science Education}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82592}, pages = {33 -- 57}, year = {2015}, abstract = {As a result of the Bologna reform of educational systems in Europe the outcome orientation of learning processes, competence-oriented descriptions of the curricula and competence-oriented assessment procedures became standard also in Computer Science Education (CSE). The following keynote addresses important issues of shaping a CSE competence model especially in the area of informatics system comprehension and object-oriented modelling. Objectives and research methodology of the project MoKoM (Modelling and Measurement of Competences in CSE) are explained. Firstly, the CSE competence model was derived based on theoretical concepts and then secondly the model was empirically examined and refined using expert interviews. Furthermore, the paper depicts the development and examination of a competence measurement instrument, which was derived from the competence model. Therefore, the instrument was applied to a large sample of students at the gymnasium's upper class level. Subsequently, efforts to develop a competence level model, based on the retrieved empirical results and on expert ratings are presented. Finally, further demands on research on competence modelling in CSE will be outlined.}, language = {en} } @article{BarnesKennewell2015, author = {Barnes, Jan and Kennewell, Steve}, title = {Teacher Perceptions of Key Competencies in ICT}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82604}, pages = {61 -- 75}, year = {2015}, abstract = {Regardless of what is intended by government curriculum specifications and advised by educational experts, the competencies taught and learned in and out of classrooms can vary considerably. In this paper, we discuss in particular how we can investigate the perceptions that individual teachers have of competencies in ICT, and how these and other factors may influence students' learning. We report case study research which identifies contradictions within the teaching of ICT competencies as an activity system, highlighting issues concerning the object of the curriculum, the roles of the participants and the school cultures. In a particular case, contradictions in the learning objectives between higher order skills and the use of application tools have been resolved by a change in the teacher's perceptions which have not led to changes in other aspects of the activity system. We look forward to further investigation of the effects of these contradictions in other case studies and on forthcoming curriculum change.}, language = {en} } @article{BroekerKastensMagenheim2015, author = {Br{\"o}ker, Kathrin and Kastens, Uwe and Magenheim, Johannes}, title = {Competences of Undergraduate Computer Science Students}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82613}, pages = {77 -- 96}, year = {2015}, abstract = {The paper presents two approaches to the development of a Computer Science Competence Model for the needs of curriculum development and evaluation in Higher Education. A normativetheoretical approach is based on the AKT and ACM/IEEE curriculum and will be used within the recommendations of the German Informatics Society (GI) for the design of CS curricula. An empirically oriented approach refines the categories of the first one with regard to specific subject areas by conducting content analysis on CS curricula of important universities from several countries. The refined model will be used for the needs of students' e-assessment and subsequent affirmative action of the CS departments.}, language = {en} } @article{DagieneStupuriene2015, author = {Dagiene, Valentina and Stupuriene, Gabriele}, title = {Informatics Education based on Solving Attractive Tasks through a Contest}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82626}, pages = {97 -- 115}, year = {2015}, abstract = {The paper discusses the issue of supporting informatics (computer science) education through competitions for lower and upper secondary school students (8-19 years old). Competitions play an important role for learners as a source of inspiration, innovation, and attraction. Running contests in informatics for school students for many years, we have noticed that the students consider the contest experience very engaging and exciting as well as a learning experience. A contest is an excellent instrument to involve students in problem solving activities. An overview of infrastructure and development of an informatics contest from international level to the national one (the Bebras contest on informatics and computer fluency, originated in Lithuania) is presented. The performance of Bebras contests in 23 countries during the last 10 years showed an unexpected and unusually high acceptance by school students and teachers. Many thousands of students participated and got a valuable input in addition to their regular informatics lectures at school. In the paper, the main attention is paid to the developed tasks and analysis of students' task solving results in Lithuania.}, language = {en} } @article{EllisAbreuEllis2015, author = {Ellis, Jason Brent and Abreu-Ellis, Carla Reis}, title = {Student Perspectives of Social Networking use in Higher Education}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82632}, pages = {117 -- 131}, year = {2015}, abstract = {Social networks are currently at the forefront of tools that lend to Personal Learning Environments (PLEs). This study aimed to observe how students perceived PLEs, what they believed were the integral components of social presence when using Facebook as part of a PLE, and to describe student's preferences for types of interactions when using Facebook as part of their PLE. This study used mixed methods to analyze the perceptions of graduate and undergraduate students on the use of social networks, more specifically Facebook as a learning tool. Fifty surveys were returned representing a 65 \% response rate. Survey questions included both closed and open-ended questions. Findings suggested that even though students rated themselves relatively well in having requisite technology skills, and 94 \% of students used Facebook primarily for social use, they were hesitant to migrate these skills to academic use because of concerns of privacy, believing that other platforms could fulfil the same purpose, and by not seeing the validity to use Facebook in establishing social presence. What lies at odds with these beliefs is that when asked to identify strategies in Facebook that enabled social presence to occur in academic work, the majority of students identified strategies in five categories that lead to social presence establishment on Facebook during their coursework.}, language = {en} } @article{GrillenbergerRomeike2015, author = {Grillenberger, Andreas and Romeike, Ralf}, title = {Teaching Data Management}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82648}, pages = {133 -- 150}, year = {2015}, abstract = {Data management is a central topic in computer science as well as in computer science education. Within the last years, this topic is changing tremendously, as its impact on daily life becomes increasingly visible. Nowadays, everyone not only needs to manage data of various kinds, but also continuously generates large amounts of data. In addition, Big Data and data analysis are intensively discussed in public dialogue because of their influences on society. For the understanding of such discussions and for being able to participate in them, fundamental knowledge on data management is necessary. Especially, being aware of the threats accompanying the ability to analyze large amounts of data in nearly real-time becomes increasingly important. This raises the question, which key competencies are necessary for daily dealings with data and data management. In this paper, we will first point out the importance of data management and of Big Data in daily life. On this basis, we will analyze which are the key competencies everyone needs concerning data management to be able to handle data in a proper way in daily life. Afterwards, we will discuss the impact of these changes in data management on computer science education and in particular database education.}, language = {en} } @article{Haugsbakken2015, author = {Haugsbakken, Halvdan}, title = {The Student Learning Ecology}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82659}, pages = {151 -- 169}, year = {2015}, abstract = {Educational research on social media has showed that students use it for socialisation, personal communication, and informal learning. Recent studies have argued that students to some degree use social media to carry out formal schoolwork. This article gives an explorative account on how a small sample of Norwegian high school students use social media to self-organise formal schoolwork. This user pattern can be called a "student learning ecology", which is a user perspective on how participating students gain access to learning resources.}, language = {en} } @article{Jones2015, author = {Jones, Anthony}, title = {ICT Competencies for School Students}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82663}, pages = {171 -- 179}, year = {2015}, abstract = {This paper discusses results from a small-scale research study, together with some recently published research into student perceptions of ICT for learning in schools, to consider relevant skills that do not appear to currently being taught. The paper concludes by raising three issues relating to learning with and through ICT that need to be addressed in school curricula and classroom teaching.}, language = {en} } @article{Weigend2015, author = {Weigend, Michael}, title = {How Things Work}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82814}, pages = {285 -- 298}, year = {2015}, abstract = {Recognizing and defining functionality is a key competence adopted in all kinds of programming projects. This study investigates how far students without specific informatics training are able to identify and verbalize functions and parameters. It presents observations from classroom activities on functional modeling in high school chemistry lessons with altogether 154 students. Finally it discusses the potential of functional modelling to improve the comprehension of scientific content.}, language = {en} } @article{BottinoChioccariello2015, author = {Bottino, Rosa and Chioccariello, Augusto}, title = {Computational Thinking}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82820}, pages = {301 -- 309}, year = {2015}, abstract = {Digital technology has radically changed the way people work in industry, finance, services, media and commerce. Informatics has contributed to the scientific and technological development of our society in general and to the digital revolution in particular. Computational thinking is the term indicating the key ideas of this discipline that might be included in the key competencies underlying the curriculum of compulsory education. The educational potential of informatics has a history dating back to the sixties. In this article, we briefly revisit this history looking for lessons learned. In particular, we focus on experiences of teaching and learning programming. However, computational thinking is more than coding. It is a way of thinking and practicing interactive dynamic modeling with computers. We advocate that learners can practice computational thinking in playful contexts where they can develop personal projects, for example building videogames and/or robots, share and discuss their construction with others. In our view, this approach allows an integration of computational thinking in the K-12 curriculum across disciplines.}, language = {en} } @article{ChristensenKnezek2015, author = {Christensen, Rhonda and Knezek, Gerald}, title = {The Technology Proficiency Self-Assessment Questionnaire (TPSA)}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82838}, pages = {311 -- 318}, year = {2015}, abstract = {The Technology Proficiency Self-Assessment (TPSA) questionnaire has been used for 15 years in the USA and other nations as a self-efficacy measure for proficiencies fundamental to effective technology integration in the classroom learning environment. Internal consistency reliabilities for each of the five-item scales have typically ranged from .73 to .88 for preservice or inservice technology-using teachers. Due to changing technologies used in education, researchers sought to renovate partially obsolete items and extend self-efficacy assessment to new areas, such as social media and mobile learning. Analysis of 2014 data gathered on a new, 34 item version of the TPSA indicates that the four established areas of email, World Wide Web (WWW), integrated applications, and teaching with technology continue to form consistent scales with reliabilities ranging from .81 to .93, while the 14 new items gathered to represent emerging technologies and media separate into two scales, each with internal consistency reliabilities greater than .9. The renovated TPSA is deemed to be worthy of continued use in the teaching with technology context.}, language = {en} } @article{MainaAngondiWaga2015, author = {Maina, Anthony Gioko and Angondi, Enos Kiforo and Waga, Rosemary}, title = {How does the Implementation of a Literacy Learning Tool Kit influence Literacy Skill Acquisition?}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82856}, pages = {319 -- 326}, year = {2015}, abstract = {This study aimed at following how teachers transfer skills into results while using ABRA literacy software. This was done in the second part of the pilot study whose aim was to provide equity to control group teachers and students by exposing them to the ABRACADABRA treatment after the end of phase 1. This opportunity was used to follow the phase 1 teachers to see how the skills learned were being transformed into results. A standard three-day initial training and planning session on how to use ABRA to teach literacy was held at the beginning of each phase for ABRA teachers (phase 1 experimental and phase 2 delayed ABRA). Teachers were provided with teaching materials including a tentative ABRA curriculum developed to align with the Kenyan English Language requirements for year 1 and 3 students. Results showed that although there was no significant difference between the groups in vocabulary-related subscales which include word reading and meaning as well as sentence comprehension, students in ABRACADABRA classes improved their scores at a significantly higher rate than students in control classes in comprehension related scores. An average student in the ABRACADABRA group improved by 12 and 16 percentile points respectively compared to their counterparts in the control group.}, language = {en} } @article{Ohrndorf2015, author = {Ohrndorf, Laura}, title = {Assignments in Computer Science Education}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82868}, pages = {327 -- 333}, year = {2015}, abstract = {In this paper we describe the recent state of our research project concerning computer science teachers' knowledge on students' cognition. We did a comprehensive analysis of textbooks, curricula and other resources, which give teachers guidance to formulate assignments. In comparison to other subjects there are only a few concepts and strategies taught to prospective computer science teachers in university. We summarize them and given an overview on our empirical approach to measure this knowledge.}, language = {en} } @article{OrBach2015, author = {Or-Bach, Rachel}, title = {Programming for Non-Programmers}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82875}, pages = {335 -- 342}, year = {2015}, abstract = {The study reported in this paper involved the employment of specific in-class exercises using a Personal Response System (PRS). These exercises were designed with two goals: to enhance students' capabilities of tracing a given code and of explaining a given code in natural language with some abstraction. The paper presents evidence from the actual use of the PRS along with students' subjective impressions regarding both the use of the PRS and the special exercises. The conclusions from the findings are followed with a short discussion on benefits of PRS-based mental processing exercises for learning programming and beyond.}, language = {en} } @article{PrestonYounie2015, author = {Preston, Christina and Younie, Sarah}, title = {Mentoring in a Digital World}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82895}, pages = {343 -- 350}, year = {2015}, abstract = {This paper focuses on the results of the evaluation of the first pilot of an e-mentoring unit designed by the Hands-On ICT consortium, funded by the EU LLL programme. The overall aim of this two-year activity is to investigate the value for professional learning of Massive Online Open Courses (MOOCs) and Community Online Open Courses (COOCs) in the context of a 'community of practice'. Three units in the first pilot covered aspects of using digital technologies to develop creative thinking skills. The findings in this paper relate to the fourth unit about e-mentoring, a skill that was important to delivering the course content in the other three units. Findings about the e-mentoring unit included: the students' request for detailed profiles so that participants can get to know each other; and, the need to reconcile the different interpretations of e-mentoring held by the participants when the course begins. The evaluators concluded that the major issues were that: not all professional learners would self-organise and network; and few would wish to mentor their colleagues voluntarily. Therefore, the e-mentoring issues will need careful consideration in pilots two and three to identify how e-mentoring will be organised.}, language = {en} } @article{PrzybyllaRomeike2015, author = {Przybylla, Mareen and Romeike, Ralf}, title = {Key Competences with Physical Computing}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82904}, pages = {351 -- 361}, year = {2015}, abstract = {Physical computing covers the design and realization of interactive objects and installations and allows students to develop concrete, tangible products of the real world that arise from the learners' imagination. This way, constructionist learning is raised to a level that enables students to gain haptic experience and thereby concretizes the virtual. In this paper the defining characteristics of physical computing are described. Key competences to be gained with physical computing will be identified.}, language = {en} } @article{ReynoldsSwainstonBendrups2015, author = {Reynolds, Nicholas and Swainston, Andrew and Bendrups, Faye}, title = {Music Technology and Computational Thinking}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82913}, pages = {363 -- 370}, year = {2015}, abstract = {A project involving the composition of a number of pieces of music by public participants revealed levels of engagement with and mastery of complex music technologies by a number of secondary student volunteers. This paper reports briefly on some initial findings of that project and seeks to illuminate an understanding of computational thinking across the curriculum.}, language = {en} } @article{SysłoKwiatkowska2015, author = {Sysło, Maciej M. and Kwiatkowska, Anna Beata}, title = {Think logarithmically!}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82923}, pages = {371 -- 380}, year = {2015}, abstract = {We discuss here a number of algorithmic topics which we use in our teaching and in learning of mathematics and informatics to illustrate and document the power of logarithm in designing very efficient algorithms and computations - logarithmic thinking is one of the most important key competencies for solving real world practical problems. We demonstrate also how to introduce logarithm independently of mathematical formalism using a conceptual model for reducing a problem size by at least half. It is quite surprising that the idea, which leads to logarithm, is present in Euclid's algorithm described almost 2000 years before John Napier invented logarithm.}, language = {en} } @article{ZierisGerstbergerMueller2015, author = {Zieris, Holger and Gerstberger, Herbert and M{\"u}ller, Wolfgang}, title = {Using Arduino-Based Experiments to Integrate Computer Science Education and Natural Science}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82938}, pages = {381 -- 389}, year = {2015}, abstract = {Current curricular trends require teachers in Baden- Wuerttemberg (Germany) to integrate Computer Science (CS) into traditional subjects, such as Physical Science. However, concrete guidelines are missing. To fill this gap, we outline an approach where a microcontroller is used to perform and evaluate measurements in the Physical Science classroom. Using the open-source Arduino platform, we expect students to acquire and develop both CS and Physical Science competencies by using a self-programmed microcontroller. In addition to this combined development of competencies in Physical Science and CS, the subject matter will be embedded in suitable contexts and learning environments, such as weather and climate.}, language = {en} } @article{Buechner2015, author = {B{\"u}chner, Steffen}, title = {Empirical and Normative Research on Fundamental Ideas of Embedded System Development}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82949}, pages = {393 -- 396}, year = {2015}, language = {en} } @article{Opel2015, author = {Opel, Simone}, title = {On the Way to a "General Model of Contextualised Computer Science Education"}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82953}, pages = {397 -- 400}, year = {2015}, language = {en} } @article{Schiller2015, author = {Schiller, Thomas}, title = {Teaching Information Security (as Part of Key Competencies)}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82960}, pages = {401 -- 404}, year = {2015}, abstract = {The poster and abstract describe the importance of teaching information security in school. After a short description of information security and important aspects, I will show, how information security fits into different guidelines or models for computer science educations and that it is therefore on of the key competencies. Afterwards I will present you a rough insight of teaching information security in Austria.}, language = {en} } @article{WegnerZenderLucke2015, author = {Wegner, Christian and Zender, Raphael and Lucke, Ulrike}, title = {ProtoSense}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82970}, pages = {405 -- 407}, year = {2015}, language = {en} } @article{DiethelmSyrbe2015, author = {Diethelm, Ira and Syrbe, J{\"o}rn}, title = {Let's talk about CS!}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82983}, pages = {411 -- 414}, year = {2015}, abstract = {To communicate about a science is the most important key competence in education for any science. Without communication we cannot teach, so teachers should reflect about the language they use in class properly. But the language students and teachers use to communicate about their CS courses is very heterogeneous, inconsistent and deeply influenced by tool names. There is a big lack of research and discussion in CS education regarding the terminology and the role of concepts and tools in our science. We don't have a consistent set of terminology that we agree on to be helpful for learning our science. This makes it nearly impossible to do research on CS competencies as long as we have not agreed on the names we use to describe these. This workshop intends to provide room to fill with discussion and first ideas for future research in this field.}, language = {en} } @article{LaiDavisEickelmannetal.2015, author = {Lai, Kwok-Wing and Davis, Niki and Eickelmann, Birgit and Erstad, Ola and Fisser, Petra and Gibson, David and Khaddage, Ferial and Knezek, Gerald and Webb, Mary}, title = {Tackling Educational Challenges in a Digitally Networked World}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82997}, pages = {415 -- 423}, year = {2015}, language = {en} } @article{Micheuz2015, author = {Micheuz, Peter}, title = {Discussing Educational Standards for Digital Competence and/or Informatics Education at Lower Secondary Level}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83008}, pages = {425 -- 431}, year = {2015}, abstract = {Participants of this workshop will be confronted exemplarily with a considerable inconsistency of global Informatics education at lower secondary level. More importantly, they are invited to contribute actively on this issue in form of short case studies of their countries. Until now, very few countries have been successful in implementing Informatics or Computing at primary and lower secondary level. The spectrum from digital literacy to informatics, particularly as a discipline in its own right, has not really achieved a breakthrough and seems to be underrepresented for these age groups. The goal of this workshop is not only to discuss the anamnesis and diagnosis of this fragmented field, but also to discuss and suggest viable forms of therapy in form of setting educational standards. Making visible good practices in some countries and comparing successful approaches are rewarding tasks for this workshop. Discussing and defining common educational standards on a transcontinental level for the age group of 14 to 15 years old students in a readable, assessable and acceptable form should keep the participants of this workshop active beyond the limited time at the workshop.}, language = {en} } @article{DelgadoKloos2015, author = {Delgado Kloos, Carlos}, title = {What about the Competencies of Educators in the New Era of Digital Education?}, series = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, journal = {KEYCIT 2014 - Key Competencies in Informatics and ICT}, number = {7}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-83015}, pages = {435 -- 438}, year = {2015}, abstract = {A lot has been published about the competencies needed by students in the 21st century (Ravenscroft et al., 2012). However, equally important are the competencies needed by educators in the new era of digital education. We review the key competencies for educators in light of the new methods of teaching and learning proposed by Massive Open Online Courses (MOOCs) and their on-campus counterparts, Small Private Online Courses (SPOCs).}, language = {en} } @phdthesis{Decker2009, author = {Decker, Gero}, title = {Design and analysis of process choreographies}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-40761}, school = {Universit{\"a}t Potsdam}, year = {2009}, abstract = {With the rise of electronic integration between organizations, the need for a precise specification of interaction behavior increases. Information systems, replacing interaction previously carried out by humans via phone, faxes and emails, require a precise specification for handling all possible situations. Such interaction behavior is described in process choreographies. Choreographies enumerate the roles involved, the allowed interactions, the message contents and the behavioral dependencies between interactions. Choreographies serve as interaction contract and are the starting point for adapting existing business processes and systems or for implementing new software components. As a thorough analysis and comparison of choreography modeling languages is missing in the literature, this thesis introduces a requirements framework for choreography languages and uses it for comparing current choreography languages. Language proposals for overcoming the limitations are given for choreography modeling on the conceptual and on the technical level. Using an interconnection modeling style, behavioral dependencies are defined on a per-role basis and different roles are interconnected using message flow. This thesis reveals a number of modeling "anti-patterns" for interconnection modeling, motivating further investigations on choreography languages following the interaction modeling style. Here, interactions are seen as atomic building blocks and the behavioral dependencies between them are defined globally. Two novel language proposals are put forward for this modeling style which have already influenced industrial standardization initiatives. While avoiding many of the pitfalls of interconnection modeling, new anomalies can arise in interaction models. A choreography might not be realizable, i.e. there does not exist a set of interacting roles that collectively realize the specified behavior. This thesis investigates different dimensions of realizability.}, language = {en} } @phdthesis{Boehne2019, author = {B{\"o}hne, Sebastian}, title = {Different degrees of formality}, doi = {10.25932/publishup-42379}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423795}, school = {Universit{\"a}t Potsdam}, pages = {VI, 167}, year = {2019}, abstract = {In this thesis we introduce the concept of the degree of formality. It is directed against a dualistic point of view, which only distinguishes between formal and informal proofs. This dualistic attitude does not respect the differences between the argumentations classified as informal and it is unproductive because the individual potential of the respective argumentation styles cannot be appreciated and remains untapped. This thesis has two parts. In the first of them we analyse the concept of the degree of formality (including a discussion about the respective benefits for each degree) while in the second we demonstrate its usefulness in three case studies. In the first case study we will repair Haskell B. Curry's view of mathematics, which incidentally is of great importance in the first part of this thesis, in light of the different degrees of formality. In the second case study we delineate how awareness of the different degrees of formality can be used to help students to learn how to prove. Third, we will show how the advantages of proofs of different degrees of formality can be combined by the development of so called tactics having a medium degree of formality. Together the three case studies show that the degrees of formality provide a convincing solution to the problem of untapped potential.}, language = {en} } @phdthesis{Przybylla2018, author = {Przybylla, Mareen}, title = {From Embedded Systems to Physical Computing: Challenges of the "Digital World" in Secondary Computer Science Education}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418339}, school = {Universit{\"a}t Potsdam}, pages = {xvii, 277}, year = {2018}, abstract = {Physical computing covers the design and realization of interactive objects and installations and allows learners to develop concrete, tangible products of the real world, which arise from their imagination. This can be used in computer science education to provide learners with interesting and motivating access to the different topic areas of the subject in constructionist and creative learning environments. However, if at all, physical computing has so far mostly been taught in afternoon clubs or other extracurricular settings. Thus, for the majority of students so far there are no opportunities to design and create their own interactive objects in regular school lessons. Despite its increasing popularity also for schools, the topic has not yet been clearly and sufficiently characterized in the context of computer science education. The aim of this doctoral thesis therefore is to clarify physical computing from the perspective of computer science education and to adequately prepare the topic both content-wise and methodologically for secondary school teaching. For this purpose, teaching examples, activities, materials and guidelines for classroom use are developed, implemented and evaluated in schools. In the theoretical part of the thesis, first the topic is examined from a technical point of view. A structured literature analysis shows that basic concepts used in physical computing can be derived from embedded systems, which are the core of a large field of different application areas and disciplines. Typical methods of physical computing in professional settings are analyzed and, from an educational perspective, elements suitable for computer science teaching in secondary schools are extracted, e. g. tinkering and prototyping. The investigation and classification of suitable tools for school teaching show that microcontrollers and mini computers, often with extensions that greatly facilitate the handling of additional components, are particularly attractive tools for secondary education. Considering the perspectives of science, teachers, students and society, in addition to general design principles, exemplary teaching approaches for school education and suitable learning materials are developed and the design, production and evaluation of a physical computing construction kit suitable for teaching is described. In the practical part of this thesis, with "My Interactive Garden", an exemplary approach to integrate physical computing in computer science teaching is tested and evaluated in different courses and refined based on the findings in a design-based research approach. In a series of workshops on physical computing, which is based on a concept for constructionist professional development that is developed specifically for this purpose, teachers are empowered and encouraged to develop and conduct physical computing lessons suitable for their particular classroom settings. Based on their in-class experiences, a process model of physical computing teaching is derived. Interviews with those teachers illustrate that benefits of physical computing, including the tangibility of crafted objects and creativity in the classroom, outweigh possible drawbacks like longer preparation times, technical difficulties or difficult assessment. Hurdles in the classroom are identified and possible solutions discussed. Empirical investigations in the different settings reveal that "My Interactive Garden" and physical computing in general have a positive impact, among others, on learner motivation, fun and interest in class and perceived competencies. Finally, the results from all evaluations are combined to evaluate the design principles for physical computing teaching and to provide a perspective on the development of decision-making aids for physical computing activities in school education.}, language = {en} } @phdthesis{Bickel2008, author = {Bickel, Steffen}, title = {Learning under differing training and test distributions}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33331}, school = {Universit{\"a}t Potsdam}, year = {2008}, abstract = {One of the main problems in machine learning is to train a predictive model from training data and to make predictions on test data. Most predictive models are constructed under the assumption that the training data is governed by the exact same distribution which the model will later be exposed to. In practice, control over the data collection process is often imperfect. A typical scenario is when labels are collected by questionnaires and one does not have access to the test population. For example, parts of the test population are underrepresented in the survey, out of reach, or do not return the questionnaire. In many applications training data from the test distribution are scarce because they are difficult to obtain or very expensive. Data from auxiliary sources drawn from similar distributions are often cheaply available. This thesis centers around learning under differing training and test distributions and covers several problem settings with different assumptions on the relationship between training and test distributions-including multi-task learning and learning under covariate shift and sample selection bias. Several new models are derived that directly characterize the divergence between training and test distributions, without the intermediate step of estimating training and test distributions separately. The integral part of these models are rescaling weights that match the rescaled or resampled training distribution to the test distribution. Integrated models are studied where only one optimization problem needs to be solved for learning under differing distributions. With a two-step approximation to the integrated models almost any supervised learning algorithm can be adopted to biased training data. In case studies on spam filtering, HIV therapy screening, targeted advertising, and other applications the performance of the new models is compared to state-of-the-art reference methods.}, language = {en} } @inproceedings{GebserHinrichsSchaubetal.2010, author = {Gebser, Martin and Hinrichs, Henrik and Schaub, Torsten H. and Thiele, Sven}, title = {xpanda: a (simple) preprocessor for adding multi-valued propositions to ASP}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41466}, year = {2010}, abstract = {We introduce a simple approach extending the input language of Answer Set Programming (ASP) systems by multi-valued propositions. Our approach is implemented as a (prototypical) preprocessor translating logic programs with multi-valued propositions into logic programs with Boolean propositions only. Our translation is modular and heavily benefits from the expressive input language of ASP. The resulting approach, along with its implementation, allows for solving interesting constraint satisfaction problems in ASP, showing a good performance.}, language = {en} } @phdthesis{Awad2010, author = {Awad, Ahmed Mahmoud Hany Aly}, title = {A compliance management framework for business process models}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-49222}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Companies develop process models to explicitly describe their business operations. In the same time, business operations, business processes, must adhere to various types of compliance requirements. Regulations, e.g., Sarbanes Oxley Act of 2002, internal policies, best practices are just a few sources of compliance requirements. In some cases, non-adherence to compliance requirements makes the organization subject to legal punishment. In other cases, non-adherence to compliance leads to loss of competitive advantage and thus loss of market share. Unlike the classical domain-independent behavioral correctness of business processes, compliance requirements are domain-specific. Moreover, compliance requirements change over time. New requirements might appear due to change in laws and adoption of new policies. Compliance requirements are offered or enforced by different entities that have different objectives behind these requirements. Finally, compliance requirements might affect different aspects of business processes, e.g., control flow and data flow. As a result, it is infeasible to hard-code compliance checks in tools. Rather, a repeatable process of modeling compliance rules and checking them against business processes automatically is needed. This thesis provides a formal approach to support process design-time compliance checking. Using visual patterns, it is possible to model compliance requirements concerning control flow, data flow and conditional flow rules. Each pattern is mapped into a temporal logic formula. The thesis addresses the problem of consistency checking among various compliance requirements, as they might stem from divergent sources. Also, the thesis contributes to automatically check compliance requirements against process models using model checking. We show that extra domain knowledge, other than expressed in compliance rules, is needed to reach correct decisions. In case of violations, we are able to provide a useful feedback to the user. The feedback is in the form of parts of the process model whose execution causes the violation. In some cases, our approach is capable of providing automated remedy of the violation.}, language = {en} } @phdthesis{Hecher2021, author = {Hecher, Markus}, title = {Advanced tools and methods for treewidth-based problem solving}, doi = {10.25932/publishup-51251}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-512519}, school = {Universit{\"a}t Potsdam}, pages = {xv, 184}, year = {2021}, abstract = {In the last decades, there was a notable progress in solving the well-known Boolean satisfiability (Sat) problem, which can be witnessed by powerful Sat solvers. One of the reasons why these solvers are so fast are structural properties of instances that are utilized by the solver's interna. This thesis deals with the well-studied structural property treewidth, which measures the closeness of an instance to being a tree. In fact, there are many problems parameterized by treewidth that are solvable in polynomial time in the instance size when parameterized by treewidth. In this work, we study advanced treewidth-based methods and tools for problems in knowledge representation and reasoning (KR). Thereby, we provide means to establish precise runtime results (upper bounds) for canonical problems relevant to KR. Then, we present a new type of problem reduction, which we call decomposition-guided (DG) that allows us to precisely monitor the treewidth when reducing from one problem to another problem. This new reduction type will be the basis for a long-open lower bound result for quantified Boolean formulas and allows us to design a new methodology for establishing runtime lower bounds for problems parameterized by treewidth. Finally, despite these lower bounds, we provide an efficient implementation of algorithms that adhere to treewidth. Our approach finds suitable abstractions of instances, which are subsequently refined in a recursive fashion, and it uses Sat solvers for solving subproblems. It turns out that our resulting solver is quite competitive for two canonical counting problems related to Sat.}, language = {en} } @phdthesis{Wist2011, author = {Wist, Dominic}, title = {Attacking complexity in logic synthesis of asynchronous circuits}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59706}, school = {Universit{\"a}t Potsdam}, year = {2011}, abstract = {Most of the microelectronic circuits fabricated today are synchronous, i.e. they are driven by one or several clock signals. Synchronous circuit design faces several fundamental challenges such as high-speed clock distribution, integration of multiple cores operating at different clock rates, reduction of power consumption and dealing with voltage, temperature, manufacturing and runtime variations. Asynchronous or clockless design plays a key role in alleviating these challenges, however the design and test of asynchronous circuits is much more difficult in comparison to their synchronous counterparts. A driving force for a widespread use of asynchronous technology is the availability of mature EDA (Electronic Design Automation) tools which provide an entire automated design flow starting from an HDL (Hardware Description Language) specification yielding the final circuit layout. Even though there was much progress in developing such EDA tools for asynchronous circuit design during the last two decades, the maturity level as well as the acceptance of them is still not comparable with tools for synchronous circuit design. In particular, logic synthesis (which implies the application of Boolean minimisation techniques) for the entire system's control path can significantly improve the efficiency of the resulting asynchronous implementation, e.g. in terms of chip area and performance. However, logic synthesis, in particular for asynchronous circuits, suffers from complexity problems. Signal Transitions Graphs (STGs) are labelled Petri nets which are a widely used to specify the interface behaviour of speed independent (SI) circuits - a robust subclass of asynchronous circuits. STG decomposition is a promising approach to tackle complexity problems like state space explosion in logic synthesis of SI circuits. The (structural) decomposition of STGs is guided by a partition of the output signals and generates a usually much smaller component STG for each partition member, i.e. a component STG with a much smaller state space than the initial specification. However, decomposition can result in component STGs that in isolation have so-called irreducible CSC conflicts (i.e. these components are not SI synthesisable anymore) even if the specification has none of them. A new approach is presented to avoid such conflicts by introducing internal communication between the components. So far, STG decompositions are guided by the finest output partitions, i.e. one output per component. However, this might not yield optimal circuit implementations. Efficient heuristics are presented to determine coarser partitions leading to improved circuits in terms of chip area. For the new algorithms correctness proofs are given and their implementations are incorporated into the decomposition tool DESIJ. The presented techniques are successfully applied to some benchmarks - including 'real-life' specifications arising in the context of control resynthesis - which delivered promising results.}, language = {en} } @phdthesis{Boeken2022, author = {B{\"o}ken, Bj{\"o}rn}, title = {Improving prediction accuracy using dynamic information}, doi = {10.25932/publishup-58512}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-585125}, school = {Universit{\"a}t Potsdam}, pages = {xii, 160}, year = {2022}, abstract = {Accurately solving classification problems nowadays is likely to be the most relevant machine learning task. Binary classification separating two classes only is algorithmically simpler but has fewer potential applications as many real-world problems are multi-class. On the reverse, separating only a subset of classes simplifies the classification task. Even though existing multi-class machine learning algorithms are very flexible regarding the number of classes, they assume that the target set Y is fixed and cannot be restricted once the training is finished. On the other hand, existing state-of-the-art production environments are becoming increasingly interconnected with the advance of Industry 4.0 and related technologies such that additional information can simplify the respective classification problems. In light of this, the main aim of this thesis is to introduce dynamic classification that generalizes multi-class classification such that the target class set can be restricted arbitrarily to a non-empty class subset M of Y at any time between two consecutive predictions. This task is solved by a combination of two algorithmic approaches. First, classifier calibration, which transforms predictions into posterior probability estimates that are intended to be well calibrated. The analysis provided focuses on monotonic calibration and in particular corrects wrong statements that appeared in the literature. It also reveals that bin-based evaluation metrics, which became popular in recent years, are unjustified and should not be used at all. Next, the validity of Platt scaling, which is the most relevant parametric calibration approach, is analyzed in depth. In particular, its optimality for classifier predictions distributed according to four different families of probability distributions as well its equivalence with Beta calibration up to a sigmoidal preprocessing are proven. For non-monotonic calibration, extended variants on kernel density estimation and the ensemble method EKDE are introduced. Finally, the calibration techniques are evaluated using a simulation study with complete information as well as on a selection of 46 real-world data sets. Building on this, classifier calibration is applied as part of decomposition-based classification that aims to reduce multi-class problems to simpler (usually binary) prediction tasks. For the involved fusing step performed at prediction time, a new approach based on evidence theory is presented that uses classifier calibration to model mass functions. This allows the analysis of decomposition-based classification against a strictly formal background and to prove closed-form equations for the overall combinations. Furthermore, the same formalism leads to a consistent integration of dynamic class information, yielding a theoretically justified and computationally tractable dynamic classification model. The insights gained from this modeling are combined with pairwise coupling, which is one of the most relevant reduction-based classification approaches, such that all individual predictions are combined with a weight. This not only generalizes existing works on pairwise coupling but also enables the integration of dynamic class information. Lastly, a thorough empirical study is performed that compares all newly introduced approaches to existing state-of-the-art techniques. For this, evaluation metrics for dynamic classification are introduced that depend on corresponding sampling strategies. Thereafter, these are applied during a three-part evaluation. First, support vector machines and random forests are applied on 26 data sets from the UCI Machine Learning Repository. Second, two state-of-the-art deep neural networks are evaluated on five benchmark data sets from a relatively recent reference work. Here, computationally feasible strategies to apply the presented algorithms in combination with large-scale models are particularly relevant because a naive application is computationally intractable. Finally, reference data from a real-world process allowing the inclusion of dynamic class information are collected and evaluated. The results show that in combination with support vector machines and random forests, pairwise coupling approaches yield the best results, while in combination with deep neural networks, differences between the different approaches are mostly small to negligible. Most importantly, all results empirically confirm that dynamic classification succeeds in improving the respective prediction accuracies. Therefore, it is crucial to pass dynamic class information in respective applications, which requires an appropriate digital infrastructure.}, language = {en} } @misc{PrasseIversenLienhardetal.2022, author = {Prasse, Paul and Iversen, Pascal and Lienhard, Matthias and Thedinga, Kristina and Herwig, Ralf and Scheffer, Tobias}, title = {Pre-Training on In Vitro and Fine-Tuning on Patient-Derived Data Improves Deep Neural Networks for Anti-Cancer Drug-Sensitivity Prediction}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1866-8372}, doi = {10.25932/publishup-57734}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577341}, pages = {1 -- 14}, year = {2022}, abstract = {Large-scale databases that report the inhibitory capacities of many combinations of candidate drug compounds and cultivated cancer cell lines have driven the development of preclinical drug-sensitivity models based on machine learning. However, cultivated cell lines have devolved from human cancer cells over years or even decades under selective pressure in culture conditions. Moreover, models that have been trained on in vitro data cannot account for interactions with other types of cells. Drug-response data that are based on patient-derived cell cultures, xenografts, and organoids, on the other hand, are not available in the quantities that are needed to train high-capacity machine-learning models. We found that pre-training deep neural network models of drug sensitivity on in vitro drug-sensitivity databases before fine-tuning the model parameters on patient-derived data improves the models' accuracy and improves the biological plausibility of the features, compared to training only on patient-derived data. From our experiments, we can conclude that pre-trained models outperform models that have been trained on the target domains in the vast majority of cases.}, language = {en} } @misc{AlLabanRegerLucke2022, author = {Al Laban, Firas and Reger, Martin and Lucke, Ulrike}, title = {Closing the Policy Gap in the Academic Bridge}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1310}, issn = {1866-8372}, doi = {10.25932/publishup-58357}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-583572}, pages = {22}, year = {2022}, abstract = {The highly structured nature of the educational sector demands effective policy mechanisms close to the needs of the field. That is why evidence-based policy making, endorsed by the European Commission under Erasmus+ Key Action 3, aims to make an alignment between the domains of policy and practice. Against this background, this article addresses two issues: First, that there is a vertical gap in the translation of higher-level policies to local strategies and regulations. Second, that there is a horizontal gap between educational domains regarding the policy awareness of individual players. This was analyzed in quantitative and qualitative studies with domain experts from the fields of virtual mobility and teacher training. From our findings, we argue that the combination of both gaps puts the academic bridge from secondary to tertiary education at risk, including the associated knowledge proficiency levels. We discuss the role of digitalization in the academic bridge by asking the question: which value does the involved stakeholders expect from educational policies? As a theoretical basis, we rely on the model of value co-creation for and by stakeholders. We describe the used instruments along with the obtained results and proposed benefits. Moreover, we reflect on the methodology applied, and we finally derive recommendations for future academic bridge policies.}, language = {en} } @misc{HollmannFrohmeEndrullatetal.2020, author = {Hollmann, Susanne and Frohme, Marcus and Endrullat, Christoph and Kremer, Andreas and D'Elia, Domenica and Regierer, Babette and Nechyporenko, Alina}, title = {Ten simple rules on how to write a standard operating procedure}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {9}, issn = {1866-8372}, doi = {10.25932/publishup-52587}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525877}, pages = {12}, year = {2020}, abstract = {Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.}, language = {en} } @phdthesis{Schneider2019, author = {Schneider, Jan Niklas}, title = {Computational approaches for emotion research}, doi = {10.25932/publishup-45927}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-459275}, school = {Universit{\"a}t Potsdam}, pages = {xv, 145}, year = {2019}, abstract = {Emotionen sind ein zentrales Element menschlichen Erlebens und spielen eine wichtige Rolle bei der Entscheidungsfindung. Diese Dissertation identifiziert drei methodische Probleme der aktuellen Emotionsforschung und zeigt auf, wie diese mittels computergest{\"u}tzter Methoden gel{\"o}st werden k{\"o}nnen. Dieser Ansatz wird in drei Forschungsprojekten demonstriert, die die Entwicklung solcher Methoden sowie deren Anwendung auf konkrete Forschungsfragen beschreiben. Das erste Projekt beschreibt ein Paradigma welches es erm{\"o}glicht, die subjektive und objektive Schwierigkeit der Emotionswahrnehmung zu messen. Dar{\"u}ber hinaus erm{\"o}glicht es die Verwendung einer beliebigen Anzahl von Emotionskategorien im Vergleich zu den {\"u}blichen sechs Kategorien der Basisemotionen. Die Ergebnisse deuten auf eine Zunahme der Schwierigkeiten bei der Wahrnehmung von Emotionen mit zunehmendem Alter der Darsteller hin und liefern Hinweise darauf, dass junge Erwachsene, {\"a}ltere Menschen und M{\"a}nner ihre Schwierigkeit bei der Wahrnehmung von Emotionen untersch{\"a}tzen. Weitere Analysen zeigten eine geringe Relevanz personenbezogener Variablen und deuteten darauf hin, dass die Schwierigkeit der Emotionswahrnehmung vornehmlich durch die Auspr{\"a}gung der Wertigkeit des Ausdrucks bestimmt wird. Das zweite Projekt zeigt am Beispiel von Arousal, einem etablierten, aber vagen Konstrukt der Emotionsforschung, wie Face-Tracking-Daten dazu genutzt werden k{\"o}nnen solche Konstrukte zu sch{\"a}rfen. Es beschreibt, wie aus Face-Tracking-Daten Maße f{\"u}r die Entfernung, Geschwindigkeit und Beschleunigung von Gesichtsausdr{\"u}cken berechnet werden k{\"o}nnen. Das Projekt untersuchte wie diesen Maße mit der Arousal-Wahrnehmung in Menschen mit und ohne Autismus zusammenh{\"a}ngen. Der Abstand zum Neutralgesicht war pr{\"a}diktiv f{\"u}r die Arousal-Bewertungen in beiden Gruppen. Die Ergebnisse deuten auf eine qualitativ {\"a}hnliche Wahrnehmung von Arousal f{\"u}r Menschen mit und ohne Autismus hin. Im dritten Projekt stellen wir die Partial-Least-Squares-Analyse als allgemeine Methode vor, um eine optimale Repr{\"a}sentation zur Verkn{\"u}pfung zweier hochdimensionale Datens{\"a}tze zu finden. Das Projekt demonstriert die Anwendbarkeit dieser Methode in der Emotionsforschung anhand der Frage nach Unterschieden in der Emotionswahrnehmung zwischen M{\"a}nnern und Frauen. Wir konnten zeigen, dass die emotionale Wahrnehmung von Frauen systematisch mehr Varianz der Gesichtsausdr{\"u}cke erfasst und dass signifikante Unterschiede in der Art und Weise bestehen, wie Frauen und M{\"a}nner einige Gesichtsausdr{\"u}cke wahrnehmen. Diese konnten wir als dynamische Gesichtsausdr{\"u}cke visualisieren. Um die Anwendung der entwickelten Methode f{\"u}r die Forschungsgemeinschaft zu erleichtern, wurde ein Software-Paket f{\"u}r die Statistikumgebung R geschrieben. Zudem wurde eine Website entwickelt (thisemotiondoesnotexist.com), die es Besuchern erlaubt, ein Partial-Least-Squares-Modell von Emotionsbewertungen und Face-Tracking-Daten interaktiv zu erkunden, um die entwickelte Methode zu verbreiten und ihren Nutzen f{\"u}r die Emotionsforschung zu illustrieren.}, language = {en} } @article{NylenDoerge2013, author = {Nyl{\´e}n, Aletta and D{\"o}rge, Christina}, title = {Using competencies to structure scientific writing education}, series = {Commentarii informaticae didacticae : (CID)}, journal = {Commentarii informaticae didacticae : (CID)}, number = {5}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1868-0844}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64851}, pages = {33 -- 44}, year = {2013}, abstract = {Scientific writing is an important skill for computer science and computer engineering professionals. In this paper we present a writing concept across the curriculum program directed towards scientific writing. The program is built around a hierarchy of learning outcomes. The hierarchy is constructed through analyzing the learning outcomes in relation to competencies that are needed to fulfill them.}, language = {en} } @inproceedings{GeskeWolf2010, author = {Geske, Ulrich and Wolf, Armin}, title = {Preface}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41401}, year = {2010}, abstract = {The workshops on (constraint) logic programming (WLP) are the annual meeting of the Society of Logic Programming (GLP e.V.) and bring together researchers interested in logic programming, constraint programming, and related areas like databases, artificial intelligence and operations research. In this decade, previous workshops took place in Dresden (2008), W{\"u}rzburg (2007), Vienna (2006), Ulm (2005), Potsdam (2004), Dresden (2002), Kiel (2001), and W{\"u}rzburg (2000). Contributions to workshops deal with all theoretical, experimental, and application aspects of constraint programming (CP) and logic programming (LP), including foundations of constraint/ logic programming. Some of the special topics are constraint solving and optimization, extensions of functional logic programming, deductive databases, data mining, nonmonotonic reasoning, , interaction of CP/LP with other formalisms like agents, XML, JAVA, program analysis, program transformation, program verification, meta programming, parallelism and concurrency, answer set programming, implementation and software techniques (e.g., types, modularity, design patterns), applications (e.g., in production, environment, education, internet), constraint/logic programming for semantic web systems and applications, reasoning on the semantic web, data modelling for the web, semistructured data, and web query languages.}, language = {en} } @unpublished{Arnold2009, author = {Arnold, Holger}, title = {A linearized DPLL calculus with clause learning (2nd, revised version)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29080}, year = {2009}, abstract = {Many formal descriptions of DPLL-based SAT algorithms either do not include all essential proof techniques applied by modern SAT solvers or are bound to particular heuristics or data structures. This makes it difficult to analyze proof-theoretic properties or the search complexity of these algorithms. In this paper we try to improve this situation by developing a nondeterministic proof calculus that models the functioning of SAT algorithms based on the DPLL calculus with clause learning. This calculus is independent of implementation details yet precise enough to enable a formal analysis of realistic DPLL-based SAT algorithms.}, language = {en} } @masterthesis{Repp2023, type = {Bachelor Thesis}, author = {Repp, Leo}, title = {Extending the automatic theorem prover nanoCoP with arithmetic procedures}, doi = {10.25932/publishup-57619}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-576195}, school = {Universit{\"a}t Potsdam}, pages = {52}, year = {2023}, abstract = {In dieser Bachelorarbeit implementiere ich den automatischen Theorembeweiser nanoCoP-Ω. Es handelt sich bei diesem neuen System um das Ergebnis einer Portierung von Arithmetik-behandelnden Prozeduren aus dem automatischen Theorembeweiser mit Arithmetik leanCoP-Ω in das System nanoCoP 2.0. Dazu wird zuerst der mathematische Hintergrund zu automatischen Theorembeweisern und Arithmetik gegeben. Ich stelle die Vorg{\"a}ngerprojekte leanCoP, nanoCoP und leanCoP-Ω vor, auf dessen Vorlage nanoCoP-Ω entwickelt wurde. Es folgt eine ausf{\"u}hrliche Erkl{\"a}rung der Konzepte, um welche der nicht-klausale Konnektionskalk{\"u}l erweitert werden muss, um eine Behandlung von arithmetischen Ausdr{\"u}cken und Gleichheiten in den Kalk{\"u}l zu integrieren, sowie eine Beschreibung der Implementierung dieser Konzepte in nanoCoP-Ω. Als letztes folgt eine experimentelle Evaluation von nanoCoP-Ω. Es wurde ein ausf{\"u}hrlicher Vergleich von Laufzeit und Anzahl gel{\"o}ster Probleme im Vergleich zum {\"a}hnlich aufgebauten Theorembeweiser leanCoP-Ω auf Basis der TPTP-Benchmark durchgef{\"u}hrt. Ich komme zu dem Ergebnis, dass nanoCoP-Ω deutlich schneller ist als leanCoP-Ω ist, jedoch weniger gut geeignet f{\"u}r gr{\"o}ßere Probleme. Zudem konnte ich feststellen, dass nanoCoP-Ω falsche Beweise liefern kann. Ich bespreche, wie dieses Problem gel{\"o}st werden kann, sowie einige m{\"o}gliche Optimierungen und Erweiterungen des Beweissystems.}, language = {en} } @phdthesis{Dramlitsch2002, author = {Dramlitsch, Thomas}, title = {Distributed computations in a dynamic, heterogeneous Grid environment}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000759}, school = {Universit{\"a}t Potsdam}, year = {2002}, abstract = {Die immer dichtere und schnellere Vernetzung von Rechnern und Rechenzentren {\"u}ber Hochgeschwindigkeitsnetzwerke erm{\"o}glicht eine neue Art des wissenschaftlich verteilten Rechnens, bei der geographisch weit auseinanderliegende Rechenkapazit{\"a}ten zu einer Gesamtheit zusammengefasst werden k{\"o}nnen. Dieser so entstehende virtuelle Superrechner, der selbst aus mehreren Grossrechnern besteht, kann dazu genutzt werden Probleme zu berechnen, f{\"u}r die die einzelnen Grossrechner zu klein sind. Die Probleme, die numerisch mit heutigen Rechenkapazit{\"a}ten nicht l{\"o}sbar sind, erstrecken sich durch s{\"a}mtliche Gebiete der heutigen Wissenschaft, angefangen von Astrophysik, Molek{\"u}lphysik, Bioinformatik, Meteorologie, bis hin zur Zahlentheorie und Fluiddynamik um nur einige Gebiete zu nennen. Je nach Art der Problemstellung und des L{\"o}sungsverfahrens gestalten sich solche "Meta-Berechnungen" mehr oder weniger schwierig. Allgemein kann man sagen, dass solche Berechnungen um so schwerer und auch um so uneffizienter werden, je mehr Kommunikation zwischen den einzelnen Prozessen (oder Prozessoren) herrscht. Dies ist dadurch begr{\"u}ndet, dass die Bandbreiten bzw. Latenzzeiten zwischen zwei Prozessoren auf demselben Grossrechner oder Cluster um zwei bis vier Gr{\"o}ssenordnungen h{\"o}her bzw. niedriger liegen als zwischen Prozessoren, welche hunderte von Kilometern entfernt liegen. Dennoch bricht nunmehr eine Zeit an, in der es m{\"o}glich ist Berechnungen auf solch virtuellen Supercomputern auch mit kommunikationsintensiven Programmen durchzuf{\"u}hren. Eine grosse Klasse von kommunikations- und berechnungsintensiven Programmen ist diejenige, die die L{\"o}sung von Differentialgleichungen mithilfe von finiten Differenzen zum Inhalt hat. Gerade diese Klasse von Programmen und deren Betrieb in einem virtuellen Superrechner wird in dieser vorliegenden Dissertation behandelt. Methoden zur effizienteren Durchf{\"u}hrung von solch verteilten Berechnungen werden entwickelt, analysiert und implementiert. Der Schwerpunkt liegt darin vorhandene, klassische Parallelisierungsalgorithmen zu analysieren und so zu erweitern, dass sie vorhandene Informationen (z.B. verf{\"u}gbar durch das Globus Toolkit) {\"u}ber Maschinen und Netzwerke zur effizienteren Parallelisierung nutzen. Soweit wir wissen werden solche Zusatzinformationen kaum in relevanten Programmen genutzt, da der Grossteil aller Parallelisierungsalgorithmen implizit f{\"u}r die Ausf{\"u}hrung auf Grossrechnern oder Clustern entwickelt wurde.}, language = {en} } @phdthesis{Lanfermann2002, author = {Lanfermann, Gerd}, title = {Nomadic migration : a service environment for autonomic computing on the Grid}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000773}, school = {Universit{\"a}t Potsdam}, year = {2002}, abstract = {In den vergangenen Jahren ist es zu einer dramatischen Vervielfachung der verf{\"u}gbaren Rechenzeit gekommen. Diese 'Grid Ressourcen' stehen jedoch nicht als kontinuierlicher Strom zur Verf{\"u}gung, sondern sind {\"u}ber verschiedene Maschinentypen, Plattformen und Betriebssysteme verteilt, die jeweils durch Netzwerke mit fluktuierender Bandbreite verbunden sind. Es wird f{\"u}r Wissenschaftler zunehmend schwieriger, die verf{\"u}gbaren Ressourcen f{\"u}r ihre Anwendungen zu nutzen. Wir glauben, dass intelligente, selbstbestimmende Applikationen in der Lage sein sollten, ihre Ressourcen in einer dynamischen und heterogenen Umgebung selbst zu w{\"a}hlen: Migrierende Applikationen suchen eine neue Ressource, wenn die alte aufgebraucht ist. 'Spawning'-Anwendungen lassen Algorithmen auf externen Maschinen laufen, um die Hauptanwendung zu beschleunigen. Applikationen werden neu gestartet, sobald ein Absturz endeckt wird. Alle diese Verfahren k{\"o}nnen ohne menschliche Interaktion erfolgen. Eine verteilte Rechenumgebung besitzt eine nat{\"u}rliche Unverl{\"a}sslichkeit. Jede Applikation, die mit einer solchen Umgebung interagiert, muss auf die gest{\"o}rten Komponenten reagieren k{\"o}nnen: schlechte Netzwerkverbindung, abst{\"u}rzende Maschinen, fehlerhafte Software. Wir konstruieren eine verl{\"a}ssliche Serviceinfrastruktur, indem wir der Serviceumgebung eine 'Peer-to-Peer'-Topology aufpr{\"a}gen. Diese "Grid Peer Service" Infrastruktur beinhaltet Services wie Migration und Spawning, als auch Services zum Starten von Applikationen, zur Datei{\"u}bertragung und Auswahl von Rechenressourcen. Sie benutzt existierende Gridtechnologie wo immer m{\"o}glich, um ihre Aufgabe durchzuf{\"u}hren. Ein Applikations-Information- Server arbeitet als generische Registratur f{\"u}r alle Teilnehmer in der Serviceumgebung. Die Serviceumgebung, die wir entwickelt haben, erlaubt es Applikationen z.B. eine Relokationsanfrage an einen Migrationsserver zu stellen. Der Server sucht einen neuen Computer, basierend auf den {\"u}bermittelten Ressourcen-Anforderungen. Er transferiert den Statusfile des Applikation zu der neuen Maschine und startet die Applikation neu. Obwohl das umgebende Ressourcensubstrat nicht kontinuierlich ist, k{\"o}nnen wir kontinuierliche Berechnungen auf Grids ausf{\"u}hren, indem wir die Applikation migrieren. Wir zeigen mit realistischen Beispielen, wie sich z.B. ein traditionelles Genom-Analyse-Programm leicht modifizieren l{\"a}sst, um selbstbestimmte Migrationen in dieser Serviceumgebung durchzuf{\"u}hren.}, subject = {Peer-to-Peer-Netz ; GRID computing ; Zuverl{\"a}ssigkeit ; Web Services ; Betriebsmittelverwaltung ; Migration}, language = {en} } @misc{SahlmannClemensNowaketal.2020, author = {Sahlmann, Kristina and Clemens, Vera and Nowak, Michael and Schnor, Bettina}, title = {MUP}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1094}, issn = {1866-8372}, doi = {10.25932/publishup-48901}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489013}, pages = {23}, year = {2020}, abstract = {Message Queuing Telemetry Transport (MQTT) is one of the dominating protocols for edge- and cloud-based Internet of Things (IoT) solutions. When a security vulnerability of an IoT device is known, it has to be fixed as soon as possible. This requires a firmware update procedure. In this paper, we propose a secure update protocol for MQTT-connected devices which ensures the freshness of the firmware, authenticates the new firmware and considers constrained devices. We show that the update protocol is easy to integrate in an MQTT-based IoT network using a semantic approach. The feasibility of our approach is demonstrated by a detailed performance analysis of our prototype implementation on a IoT device with 32 kB RAM. Thereby, we identify design issues in MQTT 5 which can help to improve the support of constrained devices.}, language = {en} } @phdthesis{Sahlmann2021, author = {Sahlmann, Kristina}, title = {Network management with semantic descriptions for interoperability on the Internet of Things}, doi = {10.25932/publishup-52984}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-529846}, school = {Universit{\"a}t Potsdam}, pages = {x, 272}, year = {2021}, abstract = {The Internet of Things (IoT) is a system of physical objects that can be discovered, monitored, controlled, or interacted with by electronic devices that communicate over various networking interfaces and eventually can be connected to the wider Internet. [Guinard and Trifa, 2016]. IoT devices are equipped with sensors and/or actuators and may be constrained in terms of memory, computational power, network bandwidth, and energy. Interoperability can help to manage such heterogeneous devices. Interoperability is the ability of different types of systems to work together smoothly. There are four levels of interoperability: physical, network and transport, integration, and data. The data interoperability is subdivided into syntactic and semantic data. Semantic data describes the meaning of data and the common understanding of vocabulary e.g. with the help of dictionaries, taxonomies, ontologies. To achieve interoperability, semantic interoperability is necessary. Many organizations and companies are working on standards and solutions for interoperability in the IoT. However, the commercial solutions produce a vendor lock-in. They focus on centralized approaches such as cloud-based solutions. This thesis proposes a decentralized approach namely Edge Computing. Edge Computing is based on the concepts of mesh networking and distributed processing. This approach has an advantage that information collection and processing are placed closer to the sources of this information. The goals are to reduce traffic, latency, and to be robust against a lossy or failed Internet connection. We see management of IoT devices from the network configuration management perspective. This thesis proposes a framework for network configuration management of heterogeneous, constrained IoT devices by using semantic descriptions for interoperability. The MYNO framework is an acronym for MQTT, YANG, NETCONF and Ontology. The NETCONF protocol is the IETF standard for network configuration management. The MQTT protocol is the de-facto standard in the IoT. We picked up the idea of the NETCONF-MQTT bridge, originally proposed by Scheffler and Bonneß[2017], and extended it with semantic device descriptions. These device descriptions provide a description of the device capabilities. They are based on the oneM2M Base ontology and formalized by the Semantic Web Standards. The novel approach is using a ontology-based device description directly on a constrained device in combination with the MQTT protocol. The bridge was extended in order to query such descriptions. Using a semantic annotation, we achieved that the device capabilities are self-descriptive, machine readable and re-usable. The concept of a Virtual Device was introduced and implemented, based on semantic device descriptions. A Virtual Device aggregates the capabilities of all devices at the edge network and contributes therefore to the scalability. Thus, it is possible to control all devices via a single RPC call. The model-driven NETCONF Web-Client is generated automatically from this YANG model which is generated by the bridge based on the semantic device description. The Web-Client provides a user-friendly interface, offers RPC calls and displays sensor values. We demonstrate the feasibility of this approach in different use cases: sensor and actuator scenarios, as well as event configuration and triggering. The semantic approach results in increased memory overhead. Therefore, we evaluated CBOR and RDF HDT for optimization of ontology-based device descriptions for use on constrained devices. The evaluation shows that CBOR is not suitable for long strings and RDF HDT is a promising candidate but is still a W3C Member Submission. Finally, we used an optimized JSON-LD format for the syntax of the device descriptions. One of the security tasks of network management is the distribution of firmware updates. The MYNO Update Protocol (MUP) was developed and evaluated on constrained devices CC2538dk and 6LoWPAN. The MYNO update process is focused on freshness and authenticity of the firmware. The evaluation shows that it is challenging but feasible to bring the firmware updates to constrained devices using MQTT. As a new requirement for the next MQTT version, we propose to add a slicing feature for the better support of constrained devices. The MQTT broker should slice data to the maximum packet size specified by the device and transfer it slice-by-slice. For the performance and scalability evaluation of MYNO framework, we setup the High Precision Agriculture demonstrator with 10 ESP-32 NodeMCU boards at the edge of the network. The ESP-32 NodeMCU boards, connected by WLAN, were equipped with six sensors and two actuators. The performance evaluation shows that the processing of ontology-based descriptions on a Raspberry Pi 3B with the RDFLib is a challenging task regarding computational power. Nevertheless, it is feasible because it must be done only once per device during the discovery process. The MYNO framework was tested with heterogeneous devices such as CC2538dk from Texas Instruments, Arduino Y{\´u}n Rev 3, and ESP-32 NodeMCU, and IP-based networks such as 6LoWPAN and WLAN. Summarizing, with the MYNO framework we could show that the semantic approach on constrained devices is feasible in the IoT.}, language = {en} } @phdthesis{Christgau2017, author = {Christgau, Steffen}, title = {One-sided communication on a non-cache-coherent many-core architecture}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-403100}, school = {Universit{\"a}t Potsdam}, pages = {219}, year = {2017}, abstract = {Aktuelle Mehrkernprozessoren stellen parallele Systeme dar, die den darauf ausgef{\"u}hrten Programmen gemeinsamen Speicher zur Verf{\"u}gung stellen. Sowohl die ansteigende Kernanzahlen in sogenannten Vielkernprozessoren (many-core processors) als auch die weiterhin steigende Leistungsf{\"a}higkeit der einzelnen Kerne erfordert hohe Bandbreiten, die das Speichersystem des Prozessors liefern muss. Hardware-basierte Cache-Koh{\"a}renz st{\"o}ßt in aktuellen Vielkernprozessoren an Grenzen des praktisch Machbaren. Dementsprechend m{\"u}ssen alternative Architekturen und entsprechend geeignete Programmiermodelle untersucht werden. In dieser Arbeit wird der Single-Chip Cloud Computer (SCC), ein nicht-cachekoh{\"a}renter Vielkernprozessor betrachtet, der aus 48, {\"u}ber ein Gitternetzwerk verbundenen Kernen besteht. Obwohl der Prozessor f{\"u}r nachrichten-basierte Kommunikation entwickelt worden ist, zeigen die Ergebnisse dieser Arbeit, dass einseitige Kommunikation auf Basis gemeinsamen Speichers effizient auf diesem Architekturtyp realisiert werden kann. Einseitige Kommunikation erm{\"o}glicht Datenaustausch zwischen Prozessen, bei der der Empf{\"a}nger keine Details {\"u}ber die stattfindende Kommunikation besitzen muss. Im Sinne des MPI-Standards ist so ein Zugriff auf Speicher entfernter Prozesse m{\"o}glich. Zur Umsetzung dieses Konzepts auf nicht-koh{\"a}renten Architekturen werden in dieser Arbeit sowohl eine effiziente Prozesssynchronisation als auch ein Kommunikationsschema auf Basis von software-basierter Cache-Koh{\"a}renz erarbeitet und untersucht. Die Prozesssynchronisation setzt das Konzept der general active target synchronization aus dem MPI-Standard um. Ein existierendes Klassifikationsschema f{\"u}r dessen Implementierungen wird erweitert und zur Identifikation einer geeigneten Klasse f{\"u}r die nicht-koh{\"a}rente Plattform des SCC verwendet. Auf Grundlage der Klassifikation werden existierende Implementierungen analysiert, daraus geeignete Konzepte extrahiert und ein leichtgewichtiges Synchronisationsprotokoll f{\"u}r den SCC entwickelt, das sowohl gemeinsamen Speicher als auch ungecachete Speicherzugriffe verwendet. Das vorgestellte Schema ist nicht anf{\"a}llig f{\"u}r Verz{\"o}gerungen zwischen Prozessen und erlaubt direkte Kommunikation sobald beide Kommunikationspartner daf{\"u}r bereit sind. Die experimentellen Ergebnisse zeigen ein sehr gutes Skaliserungsverhalten und eine f{\"u}nffach geringere Latenz f{\"u}r die Prozesssynchronisation im Vergleich zu einer auf Nachrichten basierenden MPI-Implementierung des SCC. F{\"u}r die Kommunikation wird mit SCOSCo ein auf gemeinsamen Speicher und software-basierter Cache-Koh{\"a}renz basierenden Konzept vorgestellt. Entsprechende Anforderungen an die Koh{\"a}renz, die dem MPI-Standard entsprechen, werden aufgestellt und eine schlanke Implementierung auf Basis der Hard- und Software-Funktionalit{\"a}ten des SCCs entwickelt. Trotz einer aufgedecktem Fehlfunktion im Speichersubsystem des SCC kann in den experimentellen Auswertungen von Mikrobenchmarks eine f{\"u}nffach verbesserte Bandbreite und eine nahezu vierfach verringerte Latenz beobachtet werden. In Anwendungsexperimenten, wie einer dreidimensionalen schnellen Fourier-Transformation, kann der Anteil der Kommunikation an der Laufzeit um den Faktor f{\"u}nf reduziert werden. In Erg{\"a}nzung dazu werden in dieser Arbeit Konzepte aufgestellt, die in zuk{\"u}nftigen Architekturen, die Cache-Koh{\"a}renz nicht auf einer globalen Ebene des Prozessors liefern k{\"o}nnen, f{\"u}r die Umsetzung von Software-basierter Koh{\"a}renz f{\"u}r einseitige Kommunikation hilfreich sind.}, language = {en} } @inproceedings{OPUS4-3955, title = {Proceedings of the 23rd Workshop on (Constraint) Logic Programming 2009}, editor = {Geske, Ulrich and Wolf, Armin}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-026-7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-37977}, pages = {187}, year = {2010}, abstract = {The workshops on (constraint) logic programming (WLP) are the annual meeting of the Society of Logic Programming (GLP e.V.) and bring together researchers interested in logic programming, constraint programming, and related areas like databases, artificial intelligence and operations research. The 23rd WLP was held in Potsdam at September 15 - 16, 2009. The topics of the presentations of WLP2009 were grouped into the major areas: Databases, Answer Set Programming, Theory and Practice of Logic Programming as well as Constraints and Constraint Handling Rules.}, language = {en} } @inproceedings{GeskeGoltz2010, author = {Geske, Ulrich and Goltz, Hans-Joachim}, title = {Efficiency of difference-list programming}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41563}, year = {2010}, abstract = {The difference-list technique is described in literature as effective method for extending lists to the right without using calls of append/3. There exist some proposals for automatic transformation of list programs into differencelist programs. However, we are interested in construction of difference-list programs by the programmer, avoiding the need of a transformation step. In [GG09] it was demonstrated, how left-recursive procedures with a dangling call of append/3 can be transformed into right-recursion using the unfolding technique. For simplification of writing difference-list programs using a new cons/2 procedure was introduced. In the present paper, we investigate how efficieny is influenced using cons/2. We measure the efficiency of procedures using accumulator technique, cons/2, DCG's, and difference lists and compute the resulting speedup in respect to the simple procedure definition using append/3. Four Prolog systems were investigated and we found different behaviour concerning the speedup by difference lists. A result of our investigations is, that an often advice given in the literature for avoiding calls append/3 could not be confirmed in this strong formulation.}, language = {en} } @phdthesis{AlSaffar2016, author = {Al-Saffar, Loay Talib Ahmed}, title = {Analysing prerequisites, expectations, apprehensions, and attitudes of university students studying Computer science}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98437}, school = {Universit{\"a}t Potsdam}, pages = {xii, 131}, year = {2016}, abstract = {The main objective of this dissertation is to analyse prerequisites, expectations, apprehensions, and attitudes of students studying computer science, who are willing to gain a bachelor degree. The research will also investigate in the students' learning style according to the Felder-Silverman model. These investigations fall in the attempt to make an impact on reducing the "dropout"/shrinkage rate among students, and to suggest a better learning environment. The first investigation starts with a survey that has been made at the computer science department at the University of Baghdad to investigate the attitudes of computer science students in an environment dominated by women, showing the differences in attitudes between male and female students in different study years. Students are accepted to university studies via a centrally controlled admission procedure depending mainly on their final score at school. This leads to a high percentage of students studying subjects they do not want. Our analysis shows that 75\% of the female students do not regret studying computer science although it was not their first choice. And according to statistics over previous years, women manage to succeed in their study and often graduate on top of their class. We finish with a comparison of attitudes between the freshman students of two different cultures and two different university enrolment procedures (University of Baghdad, in Iraq, and the University of Potsdam, in Germany) both with opposite gender majority. The second step of investigation took place at the department of computer science at the University of Potsdam in Germany and analyzes the learning styles of students studying the three major fields of study offered by the department (computer science, business informatics, and computer science teaching). Investigating the differences in learning styles between the students of those study fields who usually take some joint courses is important to be aware of which changes are necessary to be adopted in the teaching methods to address those different students. It was a two stage study using two questionnaires; the main one is based on the Index of Learning Styles Questionnaire of B. A. Solomon and R. M. Felder, and the second questionnaire was an investigation on the students' attitudes towards the findings of their personal first questionnaire. Our analysis shows differences in the preferences of learning style between male and female students of the different study fields, as well as differences between students with the different specialties (computer science, business informatics, and computer science teaching). The third investigation looks closely into the difficulties, issues, apprehensions and expectations of freshman students studying computer science. The study took place at the computer science department at the University of Potsdam with a volunteer sample of students. The goal is to determine and discuss the difficulties and issues that they are facing in their study that may lead them to think in dropping-out, changing the study field, or changing the university. The research continued with the same sample of students (with business informatics students being the majority) through more than three semesters. Difficulties and issues during the study were documented, as well as students' attitudes, apprehensions, and expectations. Some of the professors and lecturers opinions and solutions to some students' problems were also documented. Many participants had apprehensions and difficulties, especially towards informatics subjects. Some business informatics participants began to think of changing the university, in particular when they reached their third semester, others thought about changing their field of study. Till the end of this research, most of the participants continued in their studies (the study they have started with or the new study they have changed to) without leaving the higher education system.}, language = {en} } @phdthesis{Prasse2016, author = {Prasse, Paul}, title = {Pattern recognition for computer security}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-100251}, school = {Universit{\"a}t Potsdam}, pages = {VI, 75}, year = {2016}, abstract = {Computer Security deals with the detection and mitigation of threats to computer networks, data, and computing hardware. This thesis addresses the following two computer security problems: email spam campaign and malware detection. Email spam campaigns can easily be generated using popular dissemination tools by specifying simple grammars that serve as message templates. A grammar is disseminated to nodes of a bot net, the nodes create messages by instantiating the grammar at random. Email spam campaigns can encompass huge data volumes and therefore pose a threat to the stability of the infrastructure of email service providers that have to store them. Malware -software that serves a malicious purpose- is affecting web servers, client computers via active content, and client computers through executable files. Without the help of malware detection systems it would be easy for malware creators to collect sensitive information or to infiltrate computers. The detection of threats -such as email-spam messages, phishing messages, or malware- is an adversarial and therefore intrinsically difficult problem. Threats vary greatly and evolve over time. The detection of threats based on manually-designed rules is therefore difficult and requires a constant engineering effort. Machine-learning is a research area that revolves around the analysis of data and the discovery of patterns that describe aspects of the data. Discriminative learning methods extract prediction models from data that are optimized to predict a target attribute as accurately as possible. Machine-learning methods hold the promise of automatically identifying patterns that robustly and accurately detect threats. This thesis focuses on the design and analysis of discriminative learning methods for the two computer-security problems under investigation: email-campaign and malware detection. The first part of this thesis addresses email-campaign detection. We focus on regular expressions as a syntactic framework, because regular expressions are intuitively comprehensible by security engineers and administrators, and they can be applied as a detection mechanism in an extremely efficient manner. In this setting, a prediction model is provided with exemplary messages from an email-spam campaign. The prediction model has to generate a regular expression that reveals the syntactic pattern that underlies the entire campaign, and that a security engineers finds comprehensible and feels confident enough to use the expression to blacklist further messages at the email server. We model this problem as two-stage learning problem with structured input and output spaces which can be solved using standard cutting plane methods. Therefore we develop an appropriate loss function, and derive a decoder for the resulting optimization problem. The second part of this thesis deals with the problem of predicting whether a given JavaScript or PHP file is malicious or benign. Recent malware analysis techniques use static or dynamic features, or both. In fully dynamic analysis, the software or script is executed and observed for malicious behavior in a sandbox environment. By contrast, static analysis is based on features that can be extracted directly from the program file. In order to bypass static detection mechanisms, code obfuscation techniques are used to spread a malicious program file in many different syntactic variants. Deobfuscating the code before applying a static classifier can be subjected to mostly static code analysis and can overcome the problem of obfuscated malicious code, but on the other hand increases the computational costs of malware detection by an order of magnitude. In this thesis we present a cascaded architecture in which a classifier first performs a static analysis of the original code and -based on the outcome of this first classification step- the code may be deobfuscated and classified again. We explore several types of features including token \$n\$-grams, orthogonal sparse bigrams, subroutine-hashings, and syntax-tree features and study the robustness of detection methods and feature types against the evolution of malware over time. The developed tool scans very large file collections quickly and accurately. Each model is evaluated on real-world data and compared to reference methods. Our approach of inferring regular expressions to filter emails belonging to an email spam campaigns leads to models with a high true-positive rate at a very low false-positive rate that is an order of magnitude lower than that of a commercial content-based filter. Our presented system -REx-SVMshort- is being used by a commercial email service provider and complements content-based and IP-address based filtering. Our cascaded malware detection system is evaluated on a high-quality data set of almost 400,000 conspicuous PHP files and a collection of more than 1,00,000 JavaScript files. From our case study we can conclude that our system can quickly and accurately process large data collections at a low false-positive rate.}, language = {en} }