@masterthesis{Repp2023, type = {Bachelor Thesis}, author = {Repp, Leo}, title = {Extending the automatic theorem prover nanoCoP with arithmetic procedures}, doi = {10.25932/publishup-57619}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-576195}, school = {Universit{\"a}t Potsdam}, pages = {52}, year = {2023}, abstract = {In dieser Bachelorarbeit implementiere ich den automatischen Theorembeweiser nanoCoP-Ω. Es handelt sich bei diesem neuen System um das Ergebnis einer Portierung von Arithmetik-behandelnden Prozeduren aus dem automatischen Theorembeweiser mit Arithmetik leanCoP-Ω in das System nanoCoP 2.0. Dazu wird zuerst der mathematische Hintergrund zu automatischen Theorembeweisern und Arithmetik gegeben. Ich stelle die Vorg{\"a}ngerprojekte leanCoP, nanoCoP und leanCoP-Ω vor, auf dessen Vorlage nanoCoP-Ω entwickelt wurde. Es folgt eine ausf{\"u}hrliche Erkl{\"a}rung der Konzepte, um welche der nicht-klausale Konnektionskalk{\"u}l erweitert werden muss, um eine Behandlung von arithmetischen Ausdr{\"u}cken und Gleichheiten in den Kalk{\"u}l zu integrieren, sowie eine Beschreibung der Implementierung dieser Konzepte in nanoCoP-Ω. Als letztes folgt eine experimentelle Evaluation von nanoCoP-Ω. Es wurde ein ausf{\"u}hrlicher Vergleich von Laufzeit und Anzahl gel{\"o}ster Probleme im Vergleich zum {\"a}hnlich aufgebauten Theorembeweiser leanCoP-Ω auf Basis der TPTP-Benchmark durchgef{\"u}hrt. Ich komme zu dem Ergebnis, dass nanoCoP-Ω deutlich schneller ist als leanCoP-Ω ist, jedoch weniger gut geeignet f{\"u}r gr{\"o}ßere Probleme. Zudem konnte ich feststellen, dass nanoCoP-Ω falsche Beweise liefern kann. Ich bespreche, wie dieses Problem gel{\"o}st werden kann, sowie einige m{\"o}gliche Optimierungen und Erweiterungen des Beweissystems.}, language = {en} } @phdthesis{Kaminski2023, author = {Kaminski, Roland}, title = {Complex reasoning with answer set programming}, school = {Universit{\"a}t Potsdam}, pages = {301}, year = {2023}, abstract = {Answer Set Programming (ASP) allows us to address knowledge-intensive search and optimization problems in a declarative way due to its integrated modeling, grounding, and solving workflow. A problem is modeled using a rule based language and then grounded and solved. Solving results in a set of stable models that correspond to solutions of the modeled problem. In this thesis, we present the design and implementation of the clingo system---perhaps, the most widely used ASP system. It features a rich modeling language originating from the field of knowledge representation and reasoning, efficient grounding algorithms based on database evaluation techniques, and high performance solving algorithms based on Boolean satisfiability (SAT) solving technology. The contributions of this thesis lie in the design of the modeling language, the design and implementation of the grounding algorithms, and the design and implementation of an Application Programmable Interface (API) facilitating the use of ASP in real world applications and the implementation of complex forms of reasoning beyond the traditional ASP workflow.}, language = {en} } @phdthesis{Middelanis2023, author = {Middelanis, Robin}, title = {Global response to local extremes—a storyline approach on economic loss propagation from weather extremes}, doi = {10.25932/publishup-61112}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-611127}, school = {Universit{\"a}t Potsdam}, pages = {vii, 237}, year = {2023}, abstract = {Due to anthropogenic greenhouse gas emissions, Earth's average surface temperature is steadily increasing. As a consequence, many weather extremes are likely to become more frequent and intense. This poses a threat to natural and human systems, with local impacts capable of destroying exposed assets and infrastructure, and disrupting economic and societal activity. Yet, these effects are not locally confined to the directly affected regions, as they can trigger indirect economic repercussions through loss propagation along supply chains. As a result, local extremes yield a potentially global economic response. To build economic resilience and design effective adaptation measures that mitigate adverse socio-economic impacts of ongoing climate change, it is crucial to gain a comprehensive understanding of indirect impacts and the underlying economic mechanisms. Presenting six articles in this thesis, I contribute towards this understanding. To this end, I expand on local impacts under current and future climate, the resulting global economic response, as well as the methods and tools to analyze this response. Starting with a traditional assessment of weather extremes under climate change, the first article investigates extreme snowfall in the Northern Hemisphere until the end of the century. Analyzing an ensemble of global climate model projections reveals an increase of the most extreme snowfall, while mean snowfall decreases. Assessing repercussions beyond local impacts, I employ numerical simulations to compute indirect economic effects from weather extremes with the numerical agent-based shock propagation model Acclimate. This model is used in conjunction with the recently emerged storyline framework, which involves analyzing the impacts of a particular reference extreme event and comparing them to impacts in plausible counterfactual scenarios under various climate or socio-economic conditions. Using this approach, I introduce three primary storylines that shed light on the complex mechanisms underlying economic loss propagation. In the second and third articles of this thesis, I analyze storylines for the historical Hurricanes Sandy (2012) and Harvey (2017) in the USA. For this, I first estimate local economic output losses and then simulate the resulting global economic response with Acclimate. The storyline for Hurricane Sandy thereby focuses on global consumption price anomalies and the resulting changes in consumption. I find that the local economic disruption leads to a global wave-like economic price ripple, with upstream effects propagating in the supplier direction and downstream effects in the buyer direction. Initially, an upstream demand reduction causes consumption price decreases, followed by a downstream supply shortage and increasing prices, before the anomalies decay in a normalization phase. A dominant upstream or downstream effect leads to net consumption gains or losses of a region, respectively. Moreover, I demonstrate that a longer direct economic shock intensifies the downstream effect for many regions, leading to an overall consumption loss. The third article of my thesis builds upon the developed loss estimation method by incorporating projections to future global warming levels. I use these projections to explore how the global production response to Hurricane Harvey would change under further increased global warming. The results show that, while the USA is able to nationally offset direct losses in the reference configuration, other countries have to compensate for increasing shares of counterfactual future losses. This compensation is mainly achieved by large exporting countries, but gradually shifts towards smaller regions. These findings not only highlight the economy's ability to flexibly mitigate disaster losses to a certain extent, but also reveal the vulnerability and economic disadvantage of regions that are exposed to extreme weather events. The storyline in the fourth article of my thesis investigates the interaction between global economic stress and the propagation of losses from weather extremes. I examine indirect impacts of weather extremes — tropical cyclones, heat stress, and river floods — worldwide under two different economic conditions: an unstressed economy and a globally stressed economy, as seen during the Covid-19 pandemic. I demonstrate that the adverse effects of weather extremes on global consumption are strongly amplified when the economy is under stress. Specifically, consumption losses in the USA and China double and triple, respectively, due to the global economy's decreased capacity for disaster loss compensation. An aggravated scarcity intensifies the price response, causing consumption losses to increase. Advancing on the methods and tools used here, the final two articles in my thesis extend the agent-based model Acclimate and formalize the storyline approach. With the model extension described in the fifth article, regional consumers make rational choices on the goods bought such that their utility is maximized under a constrained budget. In an out-of-equilibrium economy, these rational consumers are shown to temporarily increase consumption of certain goods in spite of rising prices. The sixth article of my thesis proposes a formalization of the storyline framework, drawing on multiple studies including storylines presented in this thesis. The proposed guideline defines eight central elements that can be used to construct a storyline. Overall, this thesis contributes towards a better understanding of economic repercussions of weather extremes. It achieves this by providing assessments of local direct impacts, highlighting mechanisms and impacts of loss propagation, and advancing on methods and tools used.}, language = {en} } @phdthesis{Chen2023, author = {Chen, Junchao}, title = {A self-adaptive resilient method for implementing and managing the high-reliability processing system}, doi = {10.25932/publishup-58313}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-583139}, school = {Universit{\"a}t Potsdam}, pages = {XXIII, 167}, year = {2023}, abstract = {As a result of CMOS scaling, radiation-induced Single-Event Effects (SEEs) in electronic circuits became a critical reliability issue for modern Integrated Circuits (ICs) operating under harsh radiation conditions. SEEs can be triggered in combinational or sequential logic by the impact of high-energy particles, leading to destructive or non-destructive faults, resulting in data corruption or even system failure. Typically, the SEE mitigation methods are deployed statically in processing architectures based on the worst-case radiation conditions, which is most of the time unnecessary and results in a resource overhead. Moreover, the space radiation conditions are dynamically changing, especially during Solar Particle Events (SPEs). The intensity of space radiation can differ over five orders of magnitude within a few hours or days, resulting in several orders of magnitude fault probability variation in ICs during SPEs. This thesis introduces a comprehensive approach for designing a self-adaptive fault resilient multiprocessing system to overcome the static mitigation overhead issue. This work mainly addresses the following topics: (1) Design of on-chip radiation particle monitor for real-time radiation environment detection, (2) Investigation of space environment predictor, as support for solar particle events forecast, (3) Dynamic mode configuration in the resilient multiprocessing system. Therefore, according to detected and predicted in-flight space radiation conditions, the target system can be configured to use no mitigation or low-overhead mitigation during non-critical periods of time. The redundant resources can be used to improve system performance or save power. On the other hand, during increased radiation activity periods, such as SPEs, the mitigation methods can be dynamically configured appropriately depending on the real-time space radiation environment, resulting in higher system reliability. Thus, a dynamic trade-off in the target system between reliability, performance and power consumption in real-time can be achieved. All results of this work are evaluated in a highly reliable quad-core multiprocessing system that allows the self-adaptive setting of optimal radiation mitigation mechanisms during run-time. Proposed methods can serve as a basis for establishing a comprehensive self-adaptive resilient system design process. Successful implementation of the proposed design in the quad-core multiprocessor shows its application perspective also in the other designs.}, language = {en} } @phdthesis{Schrape2023, author = {Schrape, Oliver}, title = {Methodology for standard cell-based design and implementation of reliable and robust hardware systems}, doi = {10.25932/publishup-58932}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-589326}, school = {Universit{\"a}t Potsdam}, pages = {xi, 181}, year = {2023}, abstract = {Reliable and robust data processing is one of the hardest requirements for systems in fields such as medicine, security, automotive, aviation, and space, to prevent critical system failures caused by changes in operating or environmental conditions. In particular, Signal Integrity (SI) effects such as crosstalk may distort the signal information in sensitive mixed-signal designs. A challenge for hardware systems used in the space are radiation effects. Namely, Single Event Effects (SEEs) induced by high-energy particle hits may lead to faulty computation, corrupted configuration settings, undesired system behavior, or even total malfunction. Since these applications require an extra effort in design and implementation, it is beneficial to master the standard cell design process and corresponding design flow methodologies optimized for such challenges. Especially for reliable, low-noise differential signaling logic such as Current Mode Logic (CML), a digital design flow is an orthogonal approach compared to traditional manual design. As a consequence, mandatory preliminary considerations need to be addressed in more detail. First of all, standard cell library concepts with suitable cell extensions for reliable systems and robust space applications have to be elaborated. Resulting design concepts at the cell level should enable the logical synthesis for differential logic design or improve the radiation-hardness. In parallel, the main objectives of the proposed cell architectures are to reduce the occupied area, power, and delay overhead. Second, a special setup for standard cell characterization is additionally required for a proper and accurate logic gate modeling. Last but not least, design methodologies for mandatory design flow stages such as logic synthesis and place and route need to be developed for the respective hardware systems to keep the reliability or the radiation-hardness at an acceptable level. This Thesis proposes and investigates standard cell-based design methodologies and techniques for reliable and robust hardware systems implemented in a conventional semi-conductor technology. The focus of this work is on reliable differential logic design and robust radiation-hardening-by-design circuits. The synergistic connections of the digital design flow stages are systematically addressed for these two types of hardware systems. In more detail, a library for differential logic is extended with single-ended pseudo-gates for intermediate design steps to support the logic synthesis and layout generation with commercial Computer-Aided Design (CAD) tools. Special cell layouts are proposed to relax signal routing. A library set for space applications is similarly extended by novel Radiation-Hardening-by-Design (RHBD) Triple Modular Redundancy (TMR) cells, enabling a one fault correction. Therein, additional optimized architectures for glitch filter cells, robust scannable and self-correcting flip-flops, and clock-gates are proposed. The circuit concepts and the physical layout representation views of the differential logic gates and the RHBD cells are discussed. However, the quality of results of designs depends implicitly on the accuracy of the standard cell characterization which is examined for both types therefore. The entire design flow is elaborated from the hardware design description to the layout representations. A 2-Phase routing approach together with an intermediate design conversion step is proposed after the initial place and route stage for reliable, pure differential designs, whereas a special constraining for RHBD applications in a standard technology is presented. The digital design flow for differential logic design is successfully demonstrated on a reliable differential bipolar CML application. A balanced routing result of its differential signal pairs is obtained by the proposed 2-Phase-routing approach. Moreover, the elaborated standard cell concepts and design methodology for RHBD circuits are applied to the digital part of a 7.5-15.5 MSPS 14-bit Analog-to-Digital Converter (ADC) and a complex microcontroller architecture. The ADC is implemented in an unhardened standard semiconductor technology and successfully verified by electrical measurements. The overhead of the proposed hardening approach is additionally evaluated by design exploration of the microcontroller application. Furthermore, the first obtained related measurement results of novel RHBD-∆TMR flip-flops show a radiation-tolerance up to a threshold Linear Energy Transfer (LET) of 46.1, 52.0, and 62.5 MeV cm2 mg-1 and savings in silicon area of 25-50 \% for selected TMR standard cell candidates. As a conclusion, the presented design concepts at the cell and library levels, as well as the design flow modifications are adaptable and transferable to other technology nodes. In particular, the design of hybrid solutions with integrated reliable differential logic modules together with robust radiation-tolerant circuit parts is enabled by the standard cell concepts and design methods proposed in this work.}, language = {en} } @article{PrasseIversenLienhardetal.2022, author = {Prasse, Paul and Iversen, Pascal and Lienhard, Matthias and Thedinga, Kristina and Herwig, Ralf and Scheffer, Tobias}, title = {Pre-Training on In Vitro and Fine-Tuning on Patient-Derived Data Improves Deep Neural Networks for Anti-Cancer Drug-Sensitivity Prediction}, series = {MDPI}, volume = {14}, journal = {MDPI}, edition = {16}, publisher = {MDPI}, address = {Basel, Schweiz}, issn = {2072-6694}, doi = {10.3390/cancers14163950}, pages = {1 -- 14}, year = {2022}, abstract = {Large-scale databases that report the inhibitory capacities of many combinations of candidate drug compounds and cultivated cancer cell lines have driven the development of preclinical drug-sensitivity models based on machine learning. However, cultivated cell lines have devolved from human cancer cells over years or even decades under selective pressure in culture conditions. Moreover, models that have been trained on in vitro data cannot account for interactions with other types of cells. Drug-response data that are based on patient-derived cell cultures, xenografts, and organoids, on the other hand, are not available in the quantities that are needed to train high-capacity machine-learning models. We found that pre-training deep neural network models of drug sensitivity on in vitro drug-sensitivity databases before fine-tuning the model parameters on patient-derived data improves the models' accuracy and improves the biological plausibility of the features, compared to training only on patient-derived data. From our experiments, we can conclude that pre-trained models outperform models that have been trained on the target domains in the vast majority of cases.}, language = {en} } @article{Hecher2022, author = {Hecher, Markus}, title = {Treewidth-aware reductions of normal ASP to SAT}, series = {Artificial intelligence}, volume = {304}, journal = {Artificial intelligence}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0004-3702}, doi = {10.1016/j.artint.2021.103651}, pages = {24}, year = {2022}, abstract = {Answer Set Programming (ASP) is a paradigm for modeling and solving problems for knowledge representation and reasoning. There are plenty of results dedicated to studying the hardness of (fragments of) ASP. So far, these studies resulted in characterizations in terms of computational complexity as well as in fine-grained insights presented in form of dichotomy-style results, lower bounds when translating to other formalisms like propositional satisfiability (SAT), and even detailed parameterized complexity landscapes. A generic parameter in parameterized complexity originating from graph theory is the socalled treewidth, which in a sense captures structural density of a program. Recently, there was an increase in the number of treewidth-based solvers related to SAT. While there are translations from (normal) ASP to SAT, no reduction that preserves treewidth or at least keeps track of the treewidth increase is known. In this paper we propose a novel reduction from normal ASP to SAT that is aware of the treewidth, and guarantees that a slight increase of treewidth is indeed sufficient. Further, we show a new result establishing that, when considering treewidth, already the fragment of normal ASP is slightly harder than SAT (under reasonable assumptions in computational complexity). This also confirms that our reduction probably cannot be significantly improved and that the slight increase of treewidth is unavoidable. Finally, we present an empirical study of our novel reduction from normal ASP to SAT, where we compare treewidth upper bounds that are obtained via known decomposition heuristics. Overall, our reduction works better with these heuristics than existing translations. (c) 2021 Elsevier B.V. All rights reserved.}, language = {en} } @article{AlLabanRegerLucke2022, author = {Al Laban, Firas and Reger, Martin and Lucke, Ulrike}, title = {Closing the Policy Gap in the Academic Bridge}, series = {Education sciences}, volume = {12}, journal = {Education sciences}, number = {12}, publisher = {MDPI}, address = {Basel}, issn = {2227-7102}, doi = {10.3390/educsci12120930}, year = {2022}, abstract = {The highly structured nature of the educational sector demands effective policy mechanisms close to the needs of the field. That is why evidence-based policy making, endorsed by the European Commission under Erasmus+ Key Action 3, aims to make an alignment between the domains of policy and practice. Against this background, this article addresses two issues: First, that there is a vertical gap in the translation of higher-level policies to local strategies and regulations. Second, that there is a horizontal gap between educational domains regarding the policy awareness of individual players. This was analyzed in quantitative and qualitative studies with domain experts from the fields of virtual mobility and teacher training. From our findings, we argue that the combination of both gaps puts the academic bridge from secondary to tertiary education at risk, including the associated knowledge proficiency levels. We discuss the role of digitalization in the academic bridge by asking the question: which value does the involved stakeholders expect from educational policies? As a theoretical basis, we rely on the model of value co-creation for and by stakeholders. We describe the used instruments along with the obtained results and proposed benefits. Moreover, we reflect on the methodology applied, and we finally derive recommendations for future academic bridge policies.}, language = {en} } @phdthesis{Boeken2022, author = {B{\"o}ken, Bj{\"o}rn}, title = {Improving prediction accuracy using dynamic information}, doi = {10.25932/publishup-58512}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-585125}, school = {Universit{\"a}t Potsdam}, pages = {xii, 160}, year = {2022}, abstract = {Accurately solving classification problems nowadays is likely to be the most relevant machine learning task. Binary classification separating two classes only is algorithmically simpler but has fewer potential applications as many real-world problems are multi-class. On the reverse, separating only a subset of classes simplifies the classification task. Even though existing multi-class machine learning algorithms are very flexible regarding the number of classes, they assume that the target set Y is fixed and cannot be restricted once the training is finished. On the other hand, existing state-of-the-art production environments are becoming increasingly interconnected with the advance of Industry 4.0 and related technologies such that additional information can simplify the respective classification problems. In light of this, the main aim of this thesis is to introduce dynamic classification that generalizes multi-class classification such that the target class set can be restricted arbitrarily to a non-empty class subset M of Y at any time between two consecutive predictions. This task is solved by a combination of two algorithmic approaches. First, classifier calibration, which transforms predictions into posterior probability estimates that are intended to be well calibrated. The analysis provided focuses on monotonic calibration and in particular corrects wrong statements that appeared in the literature. It also reveals that bin-based evaluation metrics, which became popular in recent years, are unjustified and should not be used at all. Next, the validity of Platt scaling, which is the most relevant parametric calibration approach, is analyzed in depth. In particular, its optimality for classifier predictions distributed according to four different families of probability distributions as well its equivalence with Beta calibration up to a sigmoidal preprocessing are proven. For non-monotonic calibration, extended variants on kernel density estimation and the ensemble method EKDE are introduced. Finally, the calibration techniques are evaluated using a simulation study with complete information as well as on a selection of 46 real-world data sets. Building on this, classifier calibration is applied as part of decomposition-based classification that aims to reduce multi-class problems to simpler (usually binary) prediction tasks. For the involved fusing step performed at prediction time, a new approach based on evidence theory is presented that uses classifier calibration to model mass functions. This allows the analysis of decomposition-based classification against a strictly formal background and to prove closed-form equations for the overall combinations. Furthermore, the same formalism leads to a consistent integration of dynamic class information, yielding a theoretically justified and computationally tractable dynamic classification model. The insights gained from this modeling are combined with pairwise coupling, which is one of the most relevant reduction-based classification approaches, such that all individual predictions are combined with a weight. This not only generalizes existing works on pairwise coupling but also enables the integration of dynamic class information. Lastly, a thorough empirical study is performed that compares all newly introduced approaches to existing state-of-the-art techniques. For this, evaluation metrics for dynamic classification are introduced that depend on corresponding sampling strategies. Thereafter, these are applied during a three-part evaluation. First, support vector machines and random forests are applied on 26 data sets from the UCI Machine Learning Repository. Second, two state-of-the-art deep neural networks are evaluated on five benchmark data sets from a relatively recent reference work. Here, computationally feasible strategies to apply the presented algorithms in combination with large-scale models are particularly relevant because a naive application is computationally intractable. Finally, reference data from a real-world process allowing the inclusion of dynamic class information are collected and evaluated. The results show that in combination with support vector machines and random forests, pairwise coupling approaches yield the best results, while in combination with deep neural networks, differences between the different approaches are mostly small to negligible. Most importantly, all results empirically confirm that dynamic classification succeeds in improving the respective prediction accuracies. Therefore, it is crucial to pass dynamic class information in respective applications, which requires an appropriate digital infrastructure.}, language = {en} } @misc{PrasseIversenLienhardetal.2022, author = {Prasse, Paul and Iversen, Pascal and Lienhard, Matthias and Thedinga, Kristina and Herwig, Ralf and Scheffer, Tobias}, title = {Pre-Training on In Vitro and Fine-Tuning on Patient-Derived Data Improves Deep Neural Networks for Anti-Cancer Drug-Sensitivity Prediction}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1866-8372}, doi = {10.25932/publishup-57734}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-577341}, pages = {1 -- 14}, year = {2022}, abstract = {Large-scale databases that report the inhibitory capacities of many combinations of candidate drug compounds and cultivated cancer cell lines have driven the development of preclinical drug-sensitivity models based on machine learning. However, cultivated cell lines have devolved from human cancer cells over years or even decades under selective pressure in culture conditions. Moreover, models that have been trained on in vitro data cannot account for interactions with other types of cells. Drug-response data that are based on patient-derived cell cultures, xenografts, and organoids, on the other hand, are not available in the quantities that are needed to train high-capacity machine-learning models. We found that pre-training deep neural network models of drug sensitivity on in vitro drug-sensitivity databases before fine-tuning the model parameters on patient-derived data improves the models' accuracy and improves the biological plausibility of the features, compared to training only on patient-derived data. From our experiments, we can conclude that pre-trained models outperform models that have been trained on the target domains in the vast majority of cases.}, language = {en} } @misc{AlLabanRegerLucke2022, author = {Al Laban, Firas and Reger, Martin and Lucke, Ulrike}, title = {Closing the Policy Gap in the Academic Bridge}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1310}, issn = {1866-8372}, doi = {10.25932/publishup-58357}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-583572}, pages = {22}, year = {2022}, abstract = {The highly structured nature of the educational sector demands effective policy mechanisms close to the needs of the field. That is why evidence-based policy making, endorsed by the European Commission under Erasmus+ Key Action 3, aims to make an alignment between the domains of policy and practice. Against this background, this article addresses two issues: First, that there is a vertical gap in the translation of higher-level policies to local strategies and regulations. Second, that there is a horizontal gap between educational domains regarding the policy awareness of individual players. This was analyzed in quantitative and qualitative studies with domain experts from the fields of virtual mobility and teacher training. From our findings, we argue that the combination of both gaps puts the academic bridge from secondary to tertiary education at risk, including the associated knowledge proficiency levels. We discuss the role of digitalization in the academic bridge by asking the question: which value does the involved stakeholders expect from educational policies? As a theoretical basis, we rely on the model of value co-creation for and by stakeholders. We describe the used instruments along with the obtained results and proposed benefits. Moreover, we reflect on the methodology applied, and we finally derive recommendations for future academic bridge policies.}, language = {en} } @article{LorenzClemensSchroetteretal.2022, author = {Lorenz, Claas and Clemens, Vera Elisabeth and Schr{\"o}tter, Max and Schnor, Bettina}, title = {Continuous verification of network security compliance}, series = {IEEE transactions on network and service management}, volume = {19}, journal = {IEEE transactions on network and service management}, number = {2}, publisher = {Institute of Electrical and Electronics Engineers}, address = {New York}, issn = {1932-4537}, doi = {10.1109/TNSM.2021.3130290}, pages = {1729 -- 1745}, year = {2022}, abstract = {Continuous verification of network security compliance is an accepted need. Especially, the analysis of stateful packet filters plays a central role for network security in practice. But the few existing tools which support the analysis of stateful packet filters are based on general applicable formal methods like Satifiability Modulo Theories (SMT) or theorem prover and show runtimes in the order of minutes to hours making them unsuitable for continuous compliance verification. In this work, we address these challenges and present the concept of state shell interweaving to transform a stateful firewall rule set into a stateless rule set. This allows us to reuse any fast domain specific engine from the field of data plane verification tools leveraging smart, very fast, and domain specialized data structures and algorithms including Header Space Analysis (HSA). First, we introduce the formal language FPL that enables a high-level human-understandable specification of the desired state of network security. Second, we demonstrate the instantiation of a compliance process using a verification framework that analyzes the configuration of complex networks and devices - including stateful firewalls - for compliance with FPL policies. Our evaluation results show the scalability of the presented approach for the well known Internet2 and Stanford benchmarks as well as for large firewall rule sets where it outscales state-of-the-art tools by a factor of over 41.}, language = {en} } @article{PrasseIversenLienhardetal.2022, author = {Prasse, Paul and Iversen, Pascal and Lienhard, Matthias and Thedinga, Kristina and Bauer, Christopher and Herwig, Ralf and Scheffer, Tobias}, title = {Matching anticancer compounds and tumor cell lines by neural networks with ranking loss}, series = {NAR: genomics and bioinformatics}, volume = {4}, journal = {NAR: genomics and bioinformatics}, number = {1}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {2631-9268}, doi = {10.1093/nargab/lqab128}, pages = {10}, year = {2022}, abstract = {Computational drug sensitivity models have the potential to improve therapeutic outcomes by identifying targeted drug components that are likely to achieve the highest efficacy for a cancer cell line at hand at a therapeutic dose. State of the art drug sensitivity models use regression techniques to predict the inhibitory concentration of a drug for a tumor cell line. This regression objective is not directly aligned with either of these principal goals of drug sensitivity models: We argue that drug sensitivity modeling should be seen as a ranking problem with an optimization criterion that quantifies a drug's inhibitory capacity for the cancer cell line at hand relative to its toxicity for healthy cells. We derive an extension to the well-established drug sensitivity regression model PaccMann that employs a ranking loss and focuses on the ratio of inhibitory concentration and therapeutic dosage range. We find that the ranking extension significantly enhances the model's capability to identify the most effective anticancer drugs for unseen tumor cell profiles based in on in-vitro data.}, language = {en} } @article{SteinertStabernack2022, author = {Steinert, Fritjof and Stabernack, Benno}, title = {Architecture of a low latency H.264/AVC video codec for robust ML based image classification how region of interests can minimize the impact of coding artifacts}, series = {Journal of Signal Processing Systems for Signal, Image, and Video Technology}, volume = {94}, journal = {Journal of Signal Processing Systems for Signal, Image, and Video Technology}, number = {7}, publisher = {Springer}, address = {New York}, issn = {1939-8018}, doi = {10.1007/s11265-021-01727-2}, pages = {693 -- 708}, year = {2022}, abstract = {The use of neural networks is considered as the state of the art in the field of image classification. A large number of different networks are available for this purpose, which, appropriately trained, permit a high level of classification accuracy. Typically, these networks are applied to uncompressed image data, since a corresponding training was also carried out using image data of similar high quality. However, if image data contains image errors, the classification accuracy deteriorates drastically. This applies in particular to coding artifacts which occur due to image and video compression. Typical application scenarios for video compression are narrowband transmission channels for which video coding is required but a subsequent classification is to be carried out on the receiver side. In this paper we present a special H.264/Advanced Video Codec (AVC) based video codec that allows certain regions of a picture to be coded with near constant picture quality in order to allow a reliable classification using neural networks, whereas the remaining image will be coded using constant bit rate. We have combined this feature with the ability to run with lowest latency properties, which is usually also required in remote control applications scenarios. The codec has been implemented as a fully hardwired High Definition video capable hardware architecture which is suitable for Field Programmable Gate Arrays.}, language = {en} } @article{BreitenreiterAndjelkovićSchrapeetal.2022, author = {Breitenreiter, Anselm and Andjelković, Marko and Schrape, Oliver and Krstić, Miloš}, title = {Fast error propagation probability estimates by answer set programming and approximate model counting}, series = {IEEE Access}, volume = {10}, journal = {IEEE Access}, publisher = {Inst. of Electr. and Electronics Engineers}, address = {Piscataway}, issn = {2169-3536}, doi = {10.1109/ACCESS.2022.3174564}, pages = {51814 -- 51825}, year = {2022}, abstract = {We present a method employing Answer Set Programming in combination with Approximate Model Counting for fast and accurate calculation of error propagation probabilities in digital circuits. By an efficient problem encoding, we achieve an input data format similar to a Verilog netlist so that extensive preprocessing is avoided. By a tight interconnection of our application with the underlying solver, we avoid iterating over fault sites and reduce calls to the solver. Several circuits were analyzed with varying numbers of considered cycles and different degrees of approximation. Our experiments show, that the runtime can be reduced by approximation by a factor of 91, whereas the error compared to the exact result is below 1\%.}, language = {en} } @article{MarcoFigueraRiedelRossietal.2022, author = {Marco Figuera, Ramiro and Riedel, Christian and Rossi, Angelo Pio and Unnithan, Vikram}, title = {Depth to diameter analysis on small simple craters at the lunar south pole - possible implications for ice harboring}, series = {Remote sensing}, volume = {14}, journal = {Remote sensing}, number = {3}, publisher = {MDPI}, address = {Basel}, issn = {2072-4292}, doi = {10.3390/rs14030450}, pages = {13}, year = {2022}, abstract = {In this paper, we present a study comparing the depth to diameter (d/D) ratio of small simple craters (200-1000 m) of an area between -88.5 degrees to -90 degrees latitude at the lunar south pole containing Permanent Shadowed Regions (PSRs) versus craters without PSRs. As PSRs can reach temperatures of 110 K and are capable of harboring volatiles, especially water ice, we analyzed the relationship of depth versus diameter ratios and its possible implications for harboring water ice. Variations in the d/D ratios can also be caused by other processes such as degradation, isostatic adjustment, or differences in surface properties. The conducted d/D ratio analysis suggests that a differentiation between craters containing PSRs versus craters without PSRs occurs. Thus, a possible direct relation between d/D ratio, PSRs, and water ice harboring might exist. Our results suggest that differences in the target's surface properties may explain the obtained results. The resulting d/D ratios of craters with PSRs can help to select target areas for future In-Situ Resource Utilization (ISRU) missions.}, language = {en} } @article{ChenLangeAndjelkovicetal.2022, author = {Chen, Junchao and Lange, Thomas and Andjelkovic, Marko and Simevski, Aleksandar and Lu, Li and Krstic, Milos}, title = {Solar particle event and single event upset prediction from SRAM-based monitor and supervised machine learning}, series = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, volume = {10}, journal = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, number = {2}, publisher = {Institute of Electrical and Electronics Engineers}, address = {[New York, NY]}, issn = {2168-6750}, doi = {10.1109/TETC.2022.3147376}, pages = {564 -- 580}, year = {2022}, abstract = {The intensity of cosmic radiation may differ over five orders of magnitude within a few hours or days during the Solar Particle Events (SPEs), thus increasing for several orders of magnitude the probability of Single Event Upsets (SEUs) in space-borne electronic systems. Therefore, it is vital to enable the early detection of the SEU rate changes in order to ensure timely activation of dynamic radiation hardening measures. In this paper, an embedded approach for the prediction of SPEs and SRAM SEU rate is presented. The proposed solution combines the real-time SRAM-based SEU monitor, the offline-trained machine learning model and online learning algorithm for the prediction. With respect to the state-of-the-art, our solution brings the following benefits: (1) Use of existing on-chip data storage SRAM as a particle detector, thus minimizing the hardware and power overhead, (2) Prediction of SRAM SEU rate one hour in advance, with the fine-grained hourly tracking of SEU variations during SPEs as well as under normal conditions, (3) Online optimization of the prediction model for enhancing the prediction accuracy during run-time, (4) Negligible cost of hardware accelerator design for the implementation of selected machine learning model and online learning algorithm. The proposed design is intended for a highly dependable and self-adaptive multiprocessing system employed in space applications, allowing to trigger the radiation mitigation mechanisms before the onset of high radiation levels.}, language = {en} } @article{AbdelwahabLandwehr2022, author = {Abdelwahab, Ahmed and Landwehr, Niels}, title = {Deep Distributional Sequence Embeddings Based on a Wasserstein Loss}, series = {Neural processing letters}, journal = {Neural processing letters}, publisher = {Springer}, address = {Dordrecht}, issn = {1370-4621}, doi = {10.1007/s11063-022-10784-y}, pages = {21}, year = {2022}, abstract = {Deep metric learning employs deep neural networks to embed instances into a metric space such that distances between instances of the same class are small and distances between instances from different classes are large. In most existing deep metric learning techniques, the embedding of an instance is given by a feature vector produced by a deep neural network and Euclidean distance or cosine similarity defines distances between these vectors. This paper studies deep distributional embeddings of sequences, where the embedding of a sequence is given by the distribution of learned deep features across the sequence. The motivation for this is to better capture statistical information about the distribution of patterns within the sequence in the embedding. When embeddings are distributions rather than vectors, measuring distances between embeddings involves comparing their respective distributions. The paper therefore proposes a distance metric based on Wasserstein distances between the distributions and a corresponding loss function for metric learning, which leads to a novel end-to-end trainable embedding model. We empirically observe that distributional embeddings outperform standard vector embeddings and that training with the proposed Wasserstein metric outperforms training with other distance functions.}, language = {en} } @article{TranPontelliBalduccinietal.2022, author = {Tran, Son Cao and Pontelli, Enrico and Balduccini, Marcello and Schaub, Torsten}, title = {Answer set planning}, series = {Theory and practice of logic programming}, journal = {Theory and practice of logic programming}, publisher = {Cambridge University Press}, address = {New York}, issn = {1471-0684}, doi = {10.1017/S1471068422000072}, pages = {73}, year = {2022}, abstract = {Answer Set Planning refers to the use of Answer Set Programming (ASP) to compute plans, that is, solutions to planning problems, that transform a given state of the world to another state. The development of efficient and scalable answer set solvers has provided a significant boost to the development of ASP-based planning systems. This paper surveys the progress made during the last two and a half decades in the area of answer set planning, from its foundations to its use in challenging planning domains. The survey explores the advantages and disadvantages of answer set planning. It also discusses typical applications of answer set planning and presents a set of challenges for future research.}, language = {en} } @phdthesis{Hecher2021, author = {Hecher, Markus}, title = {Advanced tools and methods for treewidth-based problem solving}, doi = {10.25932/publishup-51251}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-512519}, school = {Universit{\"a}t Potsdam}, pages = {xv, 184}, year = {2021}, abstract = {In the last decades, there was a notable progress in solving the well-known Boolean satisfiability (Sat) problem, which can be witnessed by powerful Sat solvers. One of the reasons why these solvers are so fast are structural properties of instances that are utilized by the solver's interna. This thesis deals with the well-studied structural property treewidth, which measures the closeness of an instance to being a tree. In fact, there are many problems parameterized by treewidth that are solvable in polynomial time in the instance size when parameterized by treewidth. In this work, we study advanced treewidth-based methods and tools for problems in knowledge representation and reasoning (KR). Thereby, we provide means to establish precise runtime results (upper bounds) for canonical problems relevant to KR. Then, we present a new type of problem reduction, which we call decomposition-guided (DG) that allows us to precisely monitor the treewidth when reducing from one problem to another problem. This new reduction type will be the basis for a long-open lower bound result for quantified Boolean formulas and allows us to design a new methodology for establishing runtime lower bounds for problems parameterized by treewidth. Finally, despite these lower bounds, we provide an efficient implementation of algorithms that adhere to treewidth. Our approach finds suitable abstractions of instances, which are subsequently refined in a recursive fashion, and it uses Sat solvers for solving subproblems. It turns out that our resulting solver is quite competitive for two canonical counting problems related to Sat.}, language = {en} } @article{BordihnVaszil2021, author = {Bordihn, Henning and Vaszil, Gy{\"o}rgy}, title = {Reversible parallel communicating finite automata systems}, series = {Acta informatica}, volume = {58}, journal = {Acta informatica}, number = {4}, publisher = {Springer}, address = {Berlin ; Heidelberg ; New York, NY}, issn = {0001-5903}, doi = {10.1007/s00236-021-00396-9}, pages = {263 -- 279}, year = {2021}, abstract = {We study the concept of reversibility in connection with parallel communicating systems of finite automata (PCFA in short). We define the notion of reversibility in the case of PCFA (also covering the non-deterministic case) and discuss the relationship of the reversibility of the systems and the reversibility of its components. We show that a system can be reversible with non-reversible components, and the other way around, the reversibility of the components does not necessarily imply the reversibility of the system as a whole. We also investigate the computational power of deterministic centralized reversible PCFA. We show that these very simple types of PCFA (returning or non-returning) can recognize regular languages which cannot be accepted by reversible (deterministic) finite automata, and that they can even accept languages that are not context-free. We also separate the deterministic and non-deterministic variants in the case of systems with non-returning communication. We show that there are languages accepted by non-deterministic centralized PCFA, which cannot be recognized by any deterministic variant of the same type.}, language = {en} } @article{BordihnHolzer2021, author = {Bordihn, Henning and Holzer, Markus}, title = {On the number of active states in finite automata}, series = {Acta informatica}, volume = {58}, journal = {Acta informatica}, number = {4}, publisher = {Springer}, address = {Berlin ; Heidelberg [u.a.]}, issn = {0001-5903}, doi = {10.1007/s00236-021-00397-8}, pages = {301 -- 318}, year = {2021}, abstract = {We introduce a new measure of descriptional complexity on finite automata, called the number of active states. Roughly speaking, the number of active states of an automaton A on input w counts the number of different states visited during the most economic computation of the automaton A for the word w. This concept generalizes to finite automata and regular languages in a straightforward way. We show that the number of active states of both finite automata and regular languages is computable, even with respect to nondeterministic finite automata. We further compare the number of active states to related measures for regular languages. In particular, we show incomparability to the radius of regular languages and that the difference between the number of active states and the total number of states needed in finite automata for a regular language can be of exponential order.}, language = {en} } @article{KreowskyStabernack2021, author = {Kreowsky, Philipp and Stabernack, Christian Benno}, title = {A full-featured FPGA-based pipelined architecture for SIFT extraction}, series = {IEEE access : practical research, open solutions / Institute of Electrical and Electronics Engineers}, volume = {9}, journal = {IEEE access : practical research, open solutions / Institute of Electrical and Electronics Engineers}, publisher = {Inst. of Electr. and Electronics Engineers}, address = {New York, NY}, issn = {2169-3536}, doi = {10.1109/ACCESS.2021.3104387}, pages = {128564 -- 128573}, year = {2021}, abstract = {Image feature detection is a key task in computer vision. Scale Invariant Feature Transform (SIFT) is a prevalent and well known algorithm for robust feature detection. However, it is computationally demanding and software implementations are not applicable for real-time performance. In this paper, a versatile and pipelined hardware implementation is proposed, that is capable of computing keypoints and rotation invariant descriptors on-chip. All computations are performed in single precision floating-point format which makes it possible to implement the original algorithm with little alteration. Various rotation resolutions and filter kernel sizes are supported for images of any resolution up to ultra-high definition. For full high definition images, 84 fps can be processed. Ultra high definition images can be processed at 21 fps.}, language = {en} } @phdthesis{Sahlmann2021, author = {Sahlmann, Kristina}, title = {Network management with semantic descriptions for interoperability on the Internet of Things}, doi = {10.25932/publishup-52984}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-529846}, school = {Universit{\"a}t Potsdam}, pages = {x, 272}, year = {2021}, abstract = {The Internet of Things (IoT) is a system of physical objects that can be discovered, monitored, controlled, or interacted with by electronic devices that communicate over various networking interfaces and eventually can be connected to the wider Internet. [Guinard and Trifa, 2016]. IoT devices are equipped with sensors and/or actuators and may be constrained in terms of memory, computational power, network bandwidth, and energy. Interoperability can help to manage such heterogeneous devices. Interoperability is the ability of different types of systems to work together smoothly. There are four levels of interoperability: physical, network and transport, integration, and data. The data interoperability is subdivided into syntactic and semantic data. Semantic data describes the meaning of data and the common understanding of vocabulary e.g. with the help of dictionaries, taxonomies, ontologies. To achieve interoperability, semantic interoperability is necessary. Many organizations and companies are working on standards and solutions for interoperability in the IoT. However, the commercial solutions produce a vendor lock-in. They focus on centralized approaches such as cloud-based solutions. This thesis proposes a decentralized approach namely Edge Computing. Edge Computing is based on the concepts of mesh networking and distributed processing. This approach has an advantage that information collection and processing are placed closer to the sources of this information. The goals are to reduce traffic, latency, and to be robust against a lossy or failed Internet connection. We see management of IoT devices from the network configuration management perspective. This thesis proposes a framework for network configuration management of heterogeneous, constrained IoT devices by using semantic descriptions for interoperability. The MYNO framework is an acronym for MQTT, YANG, NETCONF and Ontology. The NETCONF protocol is the IETF standard for network configuration management. The MQTT protocol is the de-facto standard in the IoT. We picked up the idea of the NETCONF-MQTT bridge, originally proposed by Scheffler and Bonneß[2017], and extended it with semantic device descriptions. These device descriptions provide a description of the device capabilities. They are based on the oneM2M Base ontology and formalized by the Semantic Web Standards. The novel approach is using a ontology-based device description directly on a constrained device in combination with the MQTT protocol. The bridge was extended in order to query such descriptions. Using a semantic annotation, we achieved that the device capabilities are self-descriptive, machine readable and re-usable. The concept of a Virtual Device was introduced and implemented, based on semantic device descriptions. A Virtual Device aggregates the capabilities of all devices at the edge network and contributes therefore to the scalability. Thus, it is possible to control all devices via a single RPC call. The model-driven NETCONF Web-Client is generated automatically from this YANG model which is generated by the bridge based on the semantic device description. The Web-Client provides a user-friendly interface, offers RPC calls and displays sensor values. We demonstrate the feasibility of this approach in different use cases: sensor and actuator scenarios, as well as event configuration and triggering. The semantic approach results in increased memory overhead. Therefore, we evaluated CBOR and RDF HDT for optimization of ontology-based device descriptions for use on constrained devices. The evaluation shows that CBOR is not suitable for long strings and RDF HDT is a promising candidate but is still a W3C Member Submission. Finally, we used an optimized JSON-LD format for the syntax of the device descriptions. One of the security tasks of network management is the distribution of firmware updates. The MYNO Update Protocol (MUP) was developed and evaluated on constrained devices CC2538dk and 6LoWPAN. The MYNO update process is focused on freshness and authenticity of the firmware. The evaluation shows that it is challenging but feasible to bring the firmware updates to constrained devices using MQTT. As a new requirement for the next MQTT version, we propose to add a slicing feature for the better support of constrained devices. The MQTT broker should slice data to the maximum packet size specified by the device and transfer it slice-by-slice. For the performance and scalability evaluation of MYNO framework, we setup the High Precision Agriculture demonstrator with 10 ESP-32 NodeMCU boards at the edge of the network. The ESP-32 NodeMCU boards, connected by WLAN, were equipped with six sensors and two actuators. The performance evaluation shows that the processing of ontology-based descriptions on a Raspberry Pi 3B with the RDFLib is a challenging task regarding computational power. Nevertheless, it is feasible because it must be done only once per device during the discovery process. The MYNO framework was tested with heterogeneous devices such as CC2538dk from Texas Instruments, Arduino Y{\´u}n Rev 3, and ESP-32 NodeMCU, and IP-based networks such as 6LoWPAN and WLAN. Summarizing, with the MYNO framework we could show that the semantic approach on constrained devices is feasible in the IoT.}, language = {en} } @phdthesis{Grum2021, author = {Grum, Marcus}, title = {Construction of a concept of neuronal modeling}, year = {2021}, abstract = {The business problem of having inefficient processes, imprecise process analyses, and simulations as well as non-transparent artificial neuronal network models can be overcome by an easy-to-use modeling concept. With the aim of developing a flexible and efficient approach to modeling, simulating, and optimizing processes, this paper proposes a flexible Concept of Neuronal Modeling (CoNM). The modeling concept, which is described by the modeling language designed and its mathematical formulation and is connected to a technical substantiation, is based on a collection of novel sub-artifacts. As these have been implemented as a computational model, the set of CoNM tools carries out novel kinds of Neuronal Process Modeling (NPM), Neuronal Process Simulations (NPS), and Neuronal Process Optimizations (NPO). The efficacy of the designed artifacts was demonstrated rigorously by means of six experiments and a simulator of real industrial production processes.}, language = {en} } @article{BauerHerwigLienhardetal.2021, author = {Bauer, Chris and Herwig, Ralf and Lienhard, Matthias and Prasse, Paul and Scheffer, Tobias and Schuchhardt, Johannes}, title = {Large-scale literature mining to assess the relation between anti-cancer drugs and cancer types}, series = {Journal of translational medicine}, volume = {19}, journal = {Journal of translational medicine}, number = {1}, publisher = {BioMed Central}, address = {London}, issn = {1479-5876}, doi = {10.1186/s12967-021-02941-z}, pages = {13}, year = {2021}, abstract = {Background: There is a huge body of scientific literature describing the relation between tumor types and anti-cancer drugs. The vast amount of scientific literature makes it impossible for researchers and physicians to extract all relevant information manually. Methods: In order to cope with the large amount of literature we applied an automated text mining approach to assess the relations between 30 most frequent cancer types and 270 anti-cancer drugs. We applied two different approaches, a classical text mining based on named entity recognition and an AI-based approach employing word embeddings. The consistency of literature mining results was validated with 3 independent methods: first, using data from FDA approvals, second, using experimentally measured IC-50 cell line data and third, using clinical patient survival data. Results: We demonstrated that the automated text mining was able to successfully assess the relation between cancer types and anti-cancer drugs. All validation methods showed a good correspondence between the results from literature mining and independent confirmatory approaches. The relation between most frequent cancer types and drugs employed for their treatment were visualized in a large heatmap. All results are accessible in an interactive web-based knowledge base using the following link: . Conclusions: Our approach is able to assess the relations between compounds and cancer types in an automated manner. Both, cancer types and compounds could be grouped into different clusters. Researchers can use the interactive knowledge base to inspect the presented results and follow their own research questions, for example the identification of novel indication areas for known drugs.}, language = {en} } @article{HuangRichterKleickmannetal.2021, author = {Huang, Yizhen and Richter, Eric and Kleickmann, Thilo and Wiepke, Axel and Richter, Dirk}, title = {Classroom complexity affects student teachers' behavior in a VR classroom}, series = {Computers \& education : an international journal}, volume = {163}, journal = {Computers \& education : an international journal}, publisher = {Elsevier}, address = {Oxford}, issn = {0360-1315}, doi = {10.1016/j.compedu.2020.104100}, pages = {15}, year = {2021}, abstract = {Student teachers often struggle to keep track of everything that is happening in the classroom, and particularly to notice and respond when students cause disruptions. The complexity of the classroom environment is a potential contributing factor that has not been empirically tested. In this experimental study, we utilized a virtual reality (VR) classroom to examine whether classroom complexity affects the likelihood of student teachers noticing disruptions and how they react after noticing. Classroom complexity was operationalized as the number of disruptions and the existence of overlapping disruptions (multidimensionality) as well as the existence of parallel teaching tasks (simultaneity). Results showed that student teachers (n = 50) were less likely to notice the scripted disruptions, and also less likely to respond to the disruptions in a comprehensive and effortful manner when facing greater complexity. These results may have implications for both teacher training and the design of VR for training or research purpose. This study contributes to the field from two aspects: 1) it revealed how features of the classroom environment can affect student teachers' noticing of and reaction to disruptions; and 2) it extends the functionality of the VR environment-from a teacher training tool to a testbed of fundamental classroom processes that are difficult to manipulate in real-life.}, language = {en} } @article{HawroPrzybylowiczSpindleretal.2021, author = {Hawro, Tomasz and Przybylowicz, Katarzyna and Spindler, Max and Hawro, Marlena and Steć, Michał and Altrichter, Sabine and Weller, Karsten and Magerl, Markus and Reidel, Ulrich and Alarbeed, Ezzat and Alraboni, Ola and Maurer, Marcus and Metz, Martin}, title = {The characteristics and impact of pruritus in adult dermatology patients}, series = {Journal of the American Academy of Dermatology}, volume = {84}, journal = {Journal of the American Academy of Dermatology}, number = {3}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, issn = {0190-9622}, doi = {10.1016/J.JAAD.2020.08.035}, pages = {691 -- 700}, year = {2021}, abstract = {Background: Pruritus often accompanies chronic skin diseases, exerting considerable burden on many areas of patient functioning; this burden and the features of pruritus remain insufficiently characterized. Objective: To investigate characteristics, including localization patterns, and burden of pruritus in patients with chronic dermatoses. Methods: We recruited 800 patients with active chronic skin diseases. We assessed pruritus intensity, localization, and further characteristics. We used validated questionnaires to assess quality of life, work productivity and activity impairment, anxiety, depression, and sleep quality. Results: Nine out of every 10 patients had experienced pruritus throughout their disease and 73\% in the last 7 days. Pruritus often affected the entire body and was not restricted to skin lesions. Patients with moderate to severe pruritus reported significantly more impairment to their sleep quality and work productivity, and they were more depressed and anxious than control individuals and patients with mild or no pruritus. Suicidal ideations were highly prevalent in patients with chronic pruritus (18.5\%) and atopic dermatitis (11.8\%). Conclusions: Pruritus prevalence and intensity are very high across all dermatoses studied; intensity is linked to impairment in many areas of daily functioning. Effective treatment strategies are urgently required to treat pruritus and the underlying skin disease. ( J Am Acad Dermatol 2021;84:691-700.)}, language = {en} } @article{BredeBotta2021, author = {Brede, Nuria and Botta, Nicola}, title = {On the correctness of monadic backward induction}, series = {Journal of functional programming}, volume = {31}, journal = {Journal of functional programming}, publisher = {Cambridge University Press}, address = {Cambridge}, issn = {1469-7653}, doi = {10.1017/S0956796821000228}, pages = {39}, year = {2021}, abstract = {In control theory, to solve a finite-horizon sequential decision problem (SDP) commonly means to find a list of decision rules that result in an optimal expected total reward (or cost) when taking a given number of decision steps. SDPs are routinely solved using Bellman's backward induction. Textbook authors (e.g. Bertsekas or Puterman) typically give more or less formal proofs to show that the backward induction algorithm is correct as solution method for deterministic and stochastic SDPs. Botta, Jansson and Ionescu propose a generic framework for finite horizon, monadic SDPs together with a monadic version of backward induction for solving such SDPs. In monadic SDPs, the monad captures a generic notion of uncertainty, while a generic measure function aggregates rewards. In the present paper, we define a notion of correctness for monadic SDPs and identify three conditions that allow us to prove a correctness result for monadic backward induction that is comparable to textbook correctness proofs for ordinary backward induction. The conditions that we impose are fairly general and can be cast in category-theoretical terms using the notion of Eilenberg-Moore algebra. They hold in familiar settings like those of deterministic or stochastic SDPs, but we also give examples in which they fail. Our results show that backward induction can safely be employed for a broader class of SDPs than usually treated in textbooks. However, they also rule out certain instances that were considered admissible in the context of Botta et al. 's generic framework. Our development is formalised in Idris as an extension of the Botta et al. framework and the sources are available as supplementary material.}, language = {en} } @phdthesis{Andjelkovic2021, author = {Andjelkovic, Marko}, title = {A methodology for characterization, modeling and mitigation of single event transient effects in CMOS standard combinational cells}, doi = {10.25932/publishup-53484}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-534843}, school = {Universit{\"a}t Potsdam}, pages = {xxiv, 216}, year = {2021}, abstract = {With the downscaling of CMOS technologies, the radiation-induced Single Event Transient (SET) effects in combinational logic have become a critical reliability issue for modern integrated circuits (ICs) intended for operation under harsh radiation conditions. The SET pulses generated in combinational logic may propagate through the circuit and eventually result in soft errors. It has thus become an imperative to address the SET effects in the early phases of the radiation-hard IC design. In general, the soft error mitigation solutions should accommodate both static and dynamic measures to ensure the optimal utilization of available resources. An efficient soft-error-aware design should address synergistically three main aspects: (i) characterization and modeling of soft errors, (ii) multi-level soft error mitigation, and (iii) online soft error monitoring. Although significant results have been achieved, the effectiveness of SET characterization methods, accuracy of predictive SET models, and efficiency of SET mitigation measures are still critical issues. Therefore, this work addresses the following topics: (i) Characterization and modeling of SET effects in standard combinational cells, (ii) Static mitigation of SET effects in standard combinational cells, and (iii) Online particle detection, as a support for dynamic soft error mitigation. Since the standard digital libraries are widely used in the design of radiation-hard ICs, the characterization of SET effects in standard cells and the availability of accurate SET models for the Soft Error Rate (SER) evaluation are the main prerequisites for efficient radiation-hard design. This work introduces an approach for the SPICE-based standard cell characterization with the reduced number of simulations, improved SET models and optimized SET sensitivity database. It has been shown that the inherent similarities in the SET response of logic cells for different input levels can be utilized to reduce the number of required simulations. Based on characterization results, the fitting models for the SET sensitivity metrics (critical charge, generated SET pulse width and propagated SET pulse width) have been developed. The proposed models are based on the principle of superposition, and they express explicitly the dependence of the SET sensitivity of individual combinational cells on design, operating and irradiation parameters. In contrast to the state-of-the-art characterization methodologies which employ extensive look-up tables (LUTs) for storing the simulation results, this work proposes the use of LUTs for storing the fitting coefficients of the SET sensitivity models derived from the characterization results. In that way the amount of characterization data in the SET sensitivity database is reduced significantly. The initial step in enhancing the robustness of combinational logic is the application of gate-level mitigation techniques. As a result, significant improvement of the overall SER can be achieved with minimum area, delay and power overheads. For the SET mitigation in standard cells, it is essential to employ the techniques that do not require modifying the cell structure. This work introduces the use of decoupling cells for improving the robustness of standard combinational cells. By insertion of two decoupling cells at the output of a target cell, the critical charge of the cell's output node is increased and the attenuation of short SETs is enhanced. In comparison to the most common gate-level techniques (gate upsizing and gate duplication), the proposed approach provides better SET filtering. However, as there is no single gate-level mitigation technique with optimal performance, a combination of multiple techniques is required. This work introduces a comprehensive characterization of gate-level mitigation techniques aimed to quantify their impact on the SET robustness improvement, as well as introduced area, delay and power overhead per gate. By characterizing the gate-level mitigation techniques together with the standard cells, the required effort in subsequent SER analysis of a target design can be reduced. The characterization database of the hardened standard cells can be utilized as a guideline for selection of the most appropriate mitigation solution for a given design. As a support for dynamic soft error mitigation techniques, it is important to enable the online detection of energetic particles causing the soft errors. This allows activating the power-greedy fault-tolerant configurations based on N-modular redundancy only at the high radiation levels. To enable such a functionality, it is necessary to monitor both the particle flux and the variation of particle LET, as these two parameters contribute significantly to the system SER. In this work, a particle detection approach based on custom-sized pulse stretching inverters is proposed. Employing the pulse stretching inverters connected in parallel enables to measure the particle flux in terms of the number of detected SETs, while the particle LET variations can be estimated from the distribution of SET pulse widths. This approach requires a purely digital processing logic, in contrast to the standard detectors which require complex mixed-signal processing. Besides the possibility of LET monitoring, additional advantages of the proposed particle detector are low detection latency and power consumption, and immunity to error accumulation. The results achieved in this thesis can serve as a basis for establishment of an overall soft-error-aware database for a given digital library, and a comprehensive multi-level radiation-hard design flow that can be implemented with the standard IC design tools. The following step will be to evaluate the achieved results with the irradiation experiments.}, language = {en} } @article{SchrapeAndjelkovicBreitenreiteretal.2021, author = {Schrape, Oliver and Andjelkovic, Marko and Breitenreiter, Anselm and Zeidler, Steffen and Balashov, Alexey and Krstić, Miloš}, title = {Design and evaluation of radiation-hardened standard cell flip-flops}, series = {IEEE transactions on circuits and systems : a publication of the IEEE Circuits and Systems Society: 1, Regular papers}, volume = {68}, journal = {IEEE transactions on circuits and systems : a publication of the IEEE Circuits and Systems Society: 1, Regular papers}, number = {11}, publisher = {Inst. of Electr. and Electronics Engineers}, address = {New York, NY}, issn = {1549-8328}, doi = {10.1109/TCSI.2021.3109080}, pages = {4796 -- 4809}, year = {2021}, abstract = {Use of a standard non-rad-hard digital cell library in the rad-hard design can be a cost-effective solution for space applications. In this paper we demonstrate how a standard non-rad-hard flip-flop, as one of the most vulnerable digital cells, can be converted into a rad-hard flip-flop without modifying its internal structure. We present five variants of a Triple Modular Redundancy (TMR) flip-flop: baseline TMR flip-flop, latch-based TMR flip-flop, True-Single Phase Clock (TSPC) TMR flip-flop, scannable TMR flip-flop and self-correcting TMR flipflop. For all variants, the multi-bit upsets have been addressed by applying special placement constraints, while the Single Event Transient (SET) mitigation was achieved through the usage of customized SET filters and selection of optimal inverter sizes for the clock and reset trees. The proposed flip-flop variants feature differing performance, thus enabling to choose the optimal solution for every sensitive node in the circuit, according to the predefined design constraints. Several flip-flop designs have been validated on IHP's 130nm BiCMOS process, by irradiation of custom-designed shift registers. It has been shown that the proposed TMR flip-flops are robust to soft errors with a threshold Linear Energy Transfer (LET) from (32.4 MeV.cm(2)/mg) to (62.5 MeV.cm(2)/mg), depending on the variant.}, language = {en} } @article{AndjelkovićChenSimevskietal.2021, author = {Andjelković, Marko and Chen, Junchao and Simevski, Aleksandar and Schrape, Oliver and Krstić, Miloš and Kraemer, Rolf}, title = {Monitoring of particle count rate and LET variations with pulse stretching inverters}, series = {IEEE transactions on nuclear science : a publication of the IEEE Nuclear and Plasma Sciences Society}, volume = {68}, journal = {IEEE transactions on nuclear science : a publication of the IEEE Nuclear and Plasma Sciences Society}, number = {8}, publisher = {Institute of Electrical and Electronics Engineers}, address = {New York, NY}, issn = {0018-9499}, doi = {10.1109/TNS.2021.3076400}, pages = {1772 -- 1781}, year = {2021}, abstract = {This study investigates the use of pulse stretching (skew-sized) inverters for monitoring the variation of count rate and linear energy transfer (LET) of energetic particles. The basic particle detector is a cascade of two pulse stretching inverters, and the required sensing area is obtained by connecting up to 12 two-inverter cells in parallel and employing the required number of parallel arrays. The incident particles are detected as single-event transients (SETs), whereby the SET count rate denotes the particle count rate, while the SET pulsewidth distribution depicts the LET variations. The advantage of the proposed solution is the possibility to sense the LET variations using fully digital processing logic. SPICE simulations conducted on IHP's 130-nm CMOS technology have shown that the SET pulsewidth varies by approximately 550 ps over the LET range from 1 to 100 MeV center dot cm(2) center dot mg(-1). The proposed detector is intended for triggering the fault-tolerant mechanisms within a self-adaptive multiprocessing system employed in space. It can be implemented as a standalone detector or integrated in the same chip with the target system.}, language = {en} } @article{MiddelanisWillnerOttoetal.2021, author = {Middelanis, Robin and Willner, Sven N. and Otto, Christian and Kuhla, Kilian and Quante, Lennart and Levermann, Anders}, title = {Wave-like global economic ripple response to Hurricane Sandy}, series = {Environmental research letters : ERL / Institute of Physics}, volume = {16}, journal = {Environmental research letters : ERL / Institute of Physics}, number = {12}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {1748-9326}, doi = {10.1088/1748-9326/ac39c0}, pages = {11}, year = {2021}, abstract = {Tropical cyclones range among the costliest disasters on Earth. Their economic repercussions along the supply and trade network also affect remote economies that are not directly affected. We here simulate possible global repercussions on consumption for the example case of Hurricane Sandy in the US (2012) using the shock-propagation model Acclimate. The modeled shock yields a global three-phase ripple: an initial production demand reduction and associated consumption price decrease, followed by a supply shortage with increasing prices, and finally a recovery phase. Regions with strong trade relations to the US experience strong magnitudes of the ripple. A dominating demand reduction or supply shortage leads to overall consumption gains or losses of a region, respectively. While finding these repercussions in historic data is challenging due to strong volatility of economic interactions, numerical models like ours can help to identify them by approaching the problem from an exploratory angle, isolating the effect of interest. For this, our model simulates the economic interactions of over 7000 regional economic sectors, interlinked through about 1.8 million trade relations. Under global warming, the wave-like structures of the economic response to major hurricanes like the one simulated here are likely to intensify and potentially overlap with other weather extremes.}, language = {en} } @article{QuanteWillnerMiddelanisetal.2021, author = {Quante, Lennart and Willner, Sven N. and Middelanis, Robin and Levermann, Anders}, title = {Regions of intensification of extreme snowfall under future warming}, series = {Scientific reports}, volume = {11}, journal = {Scientific reports}, number = {1}, publisher = {Macmillan Publishers Limited, part of Springer Nature}, address = {Berlin}, issn = {2045-2322}, doi = {10.1038/s41598-021-95979-4}, pages = {9}, year = {2021}, abstract = {Due to climate change the frequency and character of precipitation are changing as the hydrological cycle intensifies. With regards to snowfall, global warming has two opposing influences; increasing humidity enables intense snowfall, whereas higher temperatures decrease the likelihood of snowfall. Here we show an intensification of extreme snowfall across large areas of the Northern Hemisphere under future warming. This is robust across an ensemble of global climate models when they are bias-corrected with observational data. While mean daily snowfall decreases, both the 99th and the 99.9th percentiles of daily snowfall increase in many regions in the next decades, especially for Northern America and Asia. Additionally, the average intensity of snowfall events exceeding these percentiles as experienced historically increases in many regions. This is likely to pose a challenge to municipalities in mid to high latitudes. Overall, extreme snowfall events are likely to become an increasingly important impact of climate change in the next decades, even if they will become rarer, but not necessarily less intense, in the second half of the century.}, language = {en} } @phdthesis{Makowski2021, author = {Makowski, Silvia}, title = {Discriminative Models for Biometric Identification using Micro- and Macro-Movements of the Eyes}, school = {Universit{\"a}t Potsdam}, pages = {xi, 91}, year = {2021}, abstract = {Human visual perception is an active process. Eye movements either alternate between fixations and saccades or follow a smooth pursuit movement in case of moving targets. Besides these macroscopic gaze patterns, the eyes perform involuntary micro-movements during fixations which are commonly categorized into micro-saccades, drift and tremor. Eye movements are frequently studied in cognitive psychology, because they reflect a complex interplay of perception, attention and oculomotor control. A common insight of psychological research is that macro-movements are highly individual. Inspired by this finding, there has been a considerable amount of prior research on oculomotoric biometric identification. However, the accuracy of known approaches is too low and the time needed for identification is too long for any practical application. This thesis explores discriminative models for the task of biometric identification. Discriminative models optimize a quality measure of the predictions and are usually superior to generative approaches in discriminative tasks. However, using discriminative models requires to select a suitable form of data representation for sequential eye gaze data; i.e., by engineering features or constructing a sequence kernel and the performance of the classification model strongly depends on the data representation. We study two fundamentally different ways of representing eye gaze within a discriminative framework. In the first part of this thesis, we explore the integration of data and psychological background knowledge in the form of generative models to construct representations. To this end, we first develop generative statistical models of gaze behavior during reading and scene viewing that account for viewer-specific distributional properties of gaze patterns. In a second step, we develop a discriminative identification model by deriving Fisher kernel functions from these and several baseline models. We find that an SVM with Fisher kernel is able to reliably identify users based on their eye gaze during reading and scene viewing. However, since the generative models are constrained to use low-frequency macro-movements, they discard a significant amount of information contained in the raw eye tracking signal at a high cost: identification requires about one minute of input recording, which makes it inapplicable for real world biometric systems. In the second part of this thesis, we study a purely data-driven modeling approach. Here, we aim at automatically discovering the individual pattern hidden in the raw eye tracking signal. To this end, we develop a deep convolutional neural network DeepEyedentification that processes yaw and pitch gaze velocities and learns a representation end-to-end. Compared to prior work, this model increases the identification accuracy by one order of magnitude and the time to identification decreases to only seconds. The DeepEyedentificationLive model further improves upon the identification performance by processing binocular input and it also detects presentation-attacks. We find that by learning a representation, the performance of oculomotoric identification and presentation-attack detection can be driven close to practical relevance for biometric applications. Eye tracking devices with high sampling frequency and precision are expensive and the applicability of eye movement as a biometric feature heavily depends on cost of recording devices. In the last part of this thesis, we therefore study the requirements on data quality by evaluating the performance of the DeepEyedentificationLive network under reduced spatial and temporal resolution. We find that the method still attains a high identification accuracy at a temporal resolution of only 250 Hz and a precision of 0.03 degrees. Reducing both does not have an additive deteriorating effect.}, language = {en} } @article{SchirrmannLandwehrGiebeletal.2021, author = {Schirrmann, Michael and Landwehr, Niels and Giebel, Antje and Garz, Andreas and Dammer, Karl-Heinz}, title = {Early detection of stripe rust in winter wheat using deep residual neural networks}, series = {Frontiers in plant science : FPLS}, volume = {12}, journal = {Frontiers in plant science : FPLS}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {1664-462X}, doi = {10.3389/fpls.2021.469689}, pages = {14}, year = {2021}, abstract = {Stripe rust (Pst) is a major disease of wheat crops leading untreated to severe yield losses. The use of fungicides is often essential to control Pst when sudden outbreaks are imminent. Sensors capable of detecting Pst in wheat crops could optimize the use of fungicides and improve disease monitoring in high-throughput field phenotyping. Now, deep learning provides new tools for image recognition and may pave the way for new camera based sensors that can identify symptoms in early stages of a disease outbreak within the field. The aim of this study was to teach an image classifier to detect Pst symptoms in winter wheat canopies based on a deep residual neural network (ResNet). For this purpose, a large annotation database was created from images taken by a standard RGB camera that was mounted on a platform at a height of 2 m. Images were acquired while the platform was moved over a randomized field experiment with Pst-inoculated and Pst-free plots of winter wheat. The image classifier was trained with 224 x 224 px patches tiled from the original, unprocessed camera images. The image classifier was tested on different stages of the disease outbreak. At patch level the image classifier reached a total accuracy of 90\%. To test the image classifier on image level, the image classifier was evaluated with a sliding window using a large striding length of 224 px allowing for fast test performance. At image level, the image classifier reached a total accuracy of 77\%. Even in a stage with very low disease spreading (0.5\%) at the very beginning of the Pst outbreak, a detection accuracy of 57\% was obtained. Still in the initial phase of the Pst outbreak with 2 to 4\% of Pst disease spreading, detection accuracy with 76\% could be attained. With further optimizations, the image classifier could be implemented in embedded systems and deployed on drones, vehicles or scanning systems for fast mapping of Pst outbreaks.}, language = {en} } @article{GautamZhangLandwehretal.2021, author = {Gautam, Khem Raj and Zhang, Guoqiang and Landwehr, Niels and Adolphs, Julian}, title = {Machine learning for improvement of thermal conditions inside a hybrid ventilated animal building}, series = {Computers and electronics in agriculture : COMPAG online ; an international journal}, volume = {187}, journal = {Computers and electronics in agriculture : COMPAG online ; an international journal}, publisher = {Elsevier Science}, address = {Amsterdam [u.a.]}, issn = {0168-1699}, doi = {10.1016/j.compag.2021.106259}, pages = {10}, year = {2021}, abstract = {In buildings with hybrid ventilation, natural ventilation opening positions (windows), mechanical ventilation rates, heating, and cooling are manipulated to maintain desired thermal conditions. The indoor temperature is regulated solely by ventilation (natural and mechanical) when the external conditions are favorable to save external heating and cooling energy. The ventilation parameters are determined by a rule-based control scheme, which is not optimal. This study proposes a methodology to enable real-time optimum control of ventilation parameters. We developed offline prediction models to estimate future thermal conditions from the data collected from building in operation. The developed offline model is then used to find the optimal controllable ventilation parameters in real-time to minimize the setpoint deviation in the building. With the proposed methodology, the experimental building's setpoint deviation improved for 87\% of time, on average, by 0.53 degrees C compared to the current deviations.}, language = {en} } @article{CamargoSchirrmannLandwehretal.2021, author = {Camargo, Tibor de and Schirrmann, Michael and Landwehr, Niels and Dammer, Karl-Heinz and Pflanz, Michael}, title = {Optimized deep learning model as a basis for fast UAV mapping of weed species in winter wheat crops}, series = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, volume = {13}, journal = {Remote sensing / Molecular Diversity Preservation International (MDPI)}, number = {9}, publisher = {MDPI}, address = {Basel}, issn = {2072-4292}, doi = {10.3390/rs13091704}, pages = {19}, year = {2021}, abstract = {Weed maps should be available quickly, reliably, and with high detail to be useful for site-specific management in crop protection and to promote more sustainable agriculture by reducing pesticide use. Here, the optimization of a deep residual convolutional neural network (ResNet-18) for the classification of weed and crop plants in UAV imagery is proposed. The target was to reach sufficient performance on an embedded system by maintaining the same features of the ResNet-18 model as a basis for fast UAV mapping. This would enable online recognition and subsequent mapping of weeds during UAV flying operation. Optimization was achieved mainly by avoiding redundant computations that arise when a classification model is applied on overlapping tiles in a larger input image. The model was trained and tested with imagery obtained from a UAV flight campaign at low altitude over a winter wheat field, and classification was performed on species level with the weed species Matricaria chamomilla L., Papaver rhoeas L., Veronica hederifolia L., and Viola arvensis ssp. arvensis observed in that field. The ResNet-18 model with the optimized image-level prediction pipeline reached a performance of 2.2 frames per second with an NVIDIA Jetson AGX Xavier on the full resolution UAV image, which would amount to about 1.78 ha h(-1) area output for continuous field mapping. The overall accuracy for determining crop, soil, and weed species was 94\%. There were some limitations in the detection of species unknown to the model. When shifting from 16-bit to 32-bit model precision, no improvement in classification accuracy was observed, but a strong decline in speed performance, especially when a higher number of filters was used in the ResNet-18 model. Future work should be directed towards the integration of the mapping process on UAV platforms, guiding UAVs autonomously for mapping purpose, and ensuring the transferability of the models to other crop fields.}, language = {en} } @phdthesis{Ashouri2020, author = {Ashouri, Mohammadreza}, title = {TrainTrap}, school = {Universit{\"a}t Potsdam}, pages = {XIX, 103}, year = {2020}, language = {en} } @article{EverardoPerezOsorio2020, author = {Everardo P{\´e}rez, Flavio Omar and Osorio, Mauricio}, title = {Towards an answer set programming methodology for constructing programs following a semi-automatic approach}, series = {Electronic notes in theoretical computer science}, volume = {354}, journal = {Electronic notes in theoretical computer science}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, issn = {1571-0661}, doi = {10.1016/j.entcs.2020.10.004}, pages = {29 -- 44}, year = {2020}, abstract = {Answer Set Programming (ASP) is a successful rule-based formalism for modeling and solving knowledge-intense combinatorial (optimization) problems. Despite its success in both academic and industry, open challenges like automatic source code optimization, and software engineering remains. This is because a problem encoded into an ASP might not have the desired solving performance compared to an equivalent representation. Motivated by these two challenges, this paper has three main contributions. First, we propose a developing process towards a methodology to implement ASP programs, being faithful to existing methods. Second, we present ASP encodings that serve as the basis from the developing process. Third, we demonstrate the use of ASP to reverse the standard solving process. That is, knowing answer sets in advance, and desired strong equivalent properties, "we" exhaustively reconstruct ASP programs if they exist. This paper was originally motivated by the search of propositional formulas (if they exist) that represent the semantics of a new aggregate operator. Particularly, a parity aggregate. This aggregate comes as an improvement from the already existing parity (xor) constraints from xorro, where lacks expressiveness, even though these constraints fit perfectly for reasoning modes like sampling or model counting. To this end, this extended version covers the fundaments from parity constraints as well as the xorro system. Hence, we delve a little more in the examples and the proposed methodology over parity constraints. Finally, we discuss our results by showing the only representation available, that satisfies different properties from the classical logic xor operator, which is also consistent with the semantics of parity constraints from xorro.}, language = {en} } @article{HollmannFrohmeEndrullatetal.2020, author = {Hollmann, Susanne and Frohme, Marcus and Endrullat, Christoph and Kremer, Andreas and D'Elia, Domenica and Regierer, Babette and Nechyporenko, Alina}, title = {Ten simple rules on how to write a standard operating procedure}, series = {PLOS Computational Biology}, volume = {16}, journal = {PLOS Computational Biology}, number = {9}, publisher = {PLOS}, address = {San Francisco}, pages = {10}, year = {2020}, abstract = {Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.}, language = {en} } @article{Stede2020, author = {Stede, Manfred}, title = {From connectives to coherence relations}, series = {Revue roumaine de linguistique : RRL = Romanian review of linguistics}, volume = {65}, journal = {Revue roumaine de linguistique : RRL = Romanian review of linguistics}, number = {3}, publisher = {Ed. Academiei Rom{\^a}ne}, address = {Bucure{\c{s}}ti}, issn = {0035-3957}, pages = {213 -- 233}, year = {2020}, abstract = {The notion of coherence relations is quite widely accepted in general, but concrete proposals differ considerably on the questions of how they should be motivated, which relations are to be assumed, and how they should be defined. This paper takes a "bottom-up" perspective by assessing the contribution made by linguistic signals (connectives), using insights from the relevant literature as well as verification by practical text annotation. We work primarily with the German language here and focus on the realm of contrast. Thus, we suggest a new inventory of contrastive connective functions and discuss their relationship to contrastive coherence relations that have been proposed in earlier work.}, language = {en} } @article{TiwariPrakashGrossetal.2020, author = {Tiwari, Abhishek and Prakash, Jyoti and Groß, Sascha and Hammer, Christian}, title = {A large scale analysis of Android}, series = {The journal of systems and software}, volume = {170}, journal = {The journal of systems and software}, publisher = {Elsevier}, address = {New York}, issn = {0164-1212}, doi = {10.1016/j.jss.2020.110775}, pages = {17}, year = {2020}, abstract = {Many Android applications embed webpages via WebView components and execute JavaScript code within Android. Hybrid applications leverage dedicated APIs to load a resource and render it in a WebView. Furthermore, Android objects can be shared with the JavaScript world. However, bridging the interfaces of the Android and JavaScript world might also incur severe security threats: Potentially untrusted webpages and their JavaScript might interfere with the Android environment and its access to native features. No general analysis is currently available to assess the implications of such hybrid apps bridging the two worlds. To understand the semantics and effects of hybrid apps, we perform a large-scale study on the usage of the hybridization APIs in the wild. We analyze and categorize the parameters to hybridization APIs for 7,500 randomly selected and the 196 most popular applications from the Google Playstore as well as 1000 malware samples. Our results advance the general understanding of hybrid applications, as well as implications for potential program analyses, and the current security situation: We discovered thousands of flows of sensitive data from Android to JavaScript, the vast majority of which could flow to potentially untrustworthy code. Our analysis identified numerous web pages embedding vulnerabilities, which we exemplarily exploited. Additionally, we discovered a multitude of applications in which potentially untrusted JavaScript code may interfere with (trusted) Android objects, both in benign and malign applications.}, language = {en} } @article{BordihnVaszil2020, author = {Bordihn, Henning and Vaszil, Gy{\"o}rgy}, title = {Deterministic Lindenmayer systems with dynamic control of parallelism}, series = {International journal of foundations of computer science}, volume = {31}, journal = {International journal of foundations of computer science}, number = {1}, publisher = {World Scientific}, address = {Singapore}, issn = {0129-0541}, doi = {10.1142/S0129054120400031}, pages = {37 -- 51}, year = {2020}, abstract = {M-rate 0L systems are interactionless Lindenmayer systems together with a function assigning to every string a set of multisets of productions that may be applied simultaneously to the string. Some questions that have been left open in the forerunner papers are examined, and the computational power of deterministic M-rate 0L systems is investigated, where also tabled and extended variants are taken into consideration.}, language = {en} } @misc{HollmannFrohmeEndrullatetal.2020, author = {Hollmann, Susanne and Frohme, Marcus and Endrullat, Christoph and Kremer, Andreas and D'Elia, Domenica and Regierer, Babette and Nechyporenko, Alina}, title = {Ten simple rules on how to write a standard operating procedure}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {9}, issn = {1866-8372}, doi = {10.25932/publishup-52587}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525877}, pages = {12}, year = {2020}, abstract = {Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.}, language = {en} } @article{BordihnMitrana2020, author = {Bordihn, Henning and Mitrana, Victor}, title = {On the degrees of non-regularity and non-context-freeness}, series = {Journal of computer and system sciences}, volume = {108}, journal = {Journal of computer and system sciences}, publisher = {Elsevier}, address = {San Diego, Calif. [u.a.]}, issn = {0022-0000}, doi = {10.1016/j.jcss.2019.09.003}, pages = {104 -- 117}, year = {2020}, abstract = {We study the derivational complexity of context-free and context-sensitive grammars by counting the maximal number of non-regular and non-context-free rules used in a derivation, respectively. The degree of non-regularity/non-context-freeness of a language is the minimum degree of non-regularity/non-context-freeness of context-free/context-sensitive grammars generating it. A language has finite degree of non-regularity iff it is regular. We give a condition for deciding whether the degree of non-regularity of a given unambiguous context-free grammar is finite. The problem becomes undecidable for arbitrary linear context-free grammars. The degree of non-regularity of unambiguous context-free grammars generating non-regular languages as well as that of grammars generating deterministic context-free languages that are not regular is of order Omega(n). Context-free non-regular languages of sublinear degree of non-regularity are presented. A language has finite degree of non-context-freeness if it is context-free. Context-sensitive grammars with a quadratic degree of non-context-freeness are more powerful than those of a linear degree.}, language = {en} } @article{GebserJanhunenRintanen2020, author = {Gebser, Martin and Janhunen, Tomi and Rintanen, Jussi}, title = {Declarative encodings of acyclicity properties}, series = {Journal of logic and computation}, volume = {30}, journal = {Journal of logic and computation}, number = {4}, publisher = {Oxford Univ. Press}, address = {Eynsham, Oxford}, issn = {0955-792X}, doi = {10.1093/logcom/exv063}, pages = {923 -- 952}, year = {2020}, abstract = {Many knowledge representation tasks involve trees or similar structures as abstract datatypes. However, devising compact and efficient declarative representations of such structural properties is non-obvious and can be challenging indeed. In this article, we take a number of acyclicity properties into consideration and investigate various logic-based approaches to encode them. We use answer set programming as the primary representation language but also consider mappings to related formalisms, such as propositional logic, difference logic and linear programming. We study the compactness of encodings and the resulting computational performance on benchmarks involving acyclic or tree structures.}, language = {en} } @misc{XenikoudakisAhmedHarrisetal.2020, author = {Xenikoudakis, Georgios and Ahmed, Mayeesha and Harris, Jacob Colt and Wadleigh, Rachel and Paijmans, Johanna L. A. and Hartmann, Stefanie and Barlow, Axel and Lerner, Heather and Hofreiter, Michael}, title = {Ancient DNA reveals twenty million years of aquatic life in beavers}, series = {Current biology : CB}, volume = {30}, journal = {Current biology : CB}, number = {3}, publisher = {Current Biology Ltd.}, address = {London}, issn = {0960-9822}, doi = {10.1016/j.cub.2019.12.041}, pages = {R110 -- R111}, year = {2020}, abstract = {Xenikoudakis et al. report a partial mitochondrial genome of the extinct giant beaver Castoroides and estimate the origin of aquatic behavior in beavers to approximately 20 million years. This time estimate coincides with the extinction of terrestrial beavers and raises the question whether the two events had a common cause.}, language = {en} } @article{GebserMarateaRicca2020, author = {Gebser, Martin and Maratea, Marco and Ricca, Francesco}, title = {The Seventh Answer Set Programming Competition}, series = {Theory and practice of logic programming}, volume = {20}, journal = {Theory and practice of logic programming}, number = {2}, publisher = {Cambridge Univ. Press}, address = {Cambridge [u.a.]}, issn = {1471-0684}, doi = {10.1017/S1471068419000061}, pages = {176 -- 204}, year = {2020}, abstract = {Answer Set Programming (ASP) is a prominent knowledge representation language with roots in logic programming and non-monotonic reasoning. Biennial ASP competitions are organized in order to furnish challenging benchmark collections and assess the advancement of the state of the art in ASP solving. In this paper, we report on the design and results of the Seventh ASP Competition, jointly organized by the University of Calabria (Italy), the University of Genova (Italy), and the University of Potsdam (Germany), in affiliation with the 14th International Conference on Logic Programming and Non-Monotonic Reasoning (LPNMR 2017).}, language = {en} } @article{CabalarDieguezSchaubetal.2020, author = {Cabalar, Pedro and Dieguez, Martin and Schaub, Torsten H. and Schuhmann, Anna}, title = {Towards metric temporal answer set programming}, series = {Theory and practice of logic programming}, volume = {20}, journal = {Theory and practice of logic programming}, number = {5}, publisher = {Cambridge Univ. Press}, address = {Cambridge [u.a.]}, issn = {1471-0684}, doi = {10.1017/S1471068420000307}, pages = {783 -- 798}, year = {2020}, abstract = {We elaborate upon the theoretical foundations of a metric temporal extension of Answer Set Programming. In analogy to previous extensions of ASP with constructs from Linear Temporal and Dynamic Logic, we accomplish this in the setting of the logic of Here-and-There and its non-monotonic extension, called Equilibrium Logic. More precisely, we develop our logic on the same semantic underpinnings as its predecessors and thus use a simple time domain of bounded time steps. This allows us to compare all variants in a uniform framework and ultimately combine them in a common implementation.}, language = {en} }