@phdthesis{Weise2021, author = {Weise, Matthias}, title = {Auswahl von Selektions- und Manipulationstechniken f{\"u}r Virtual Reality-Anwendungen}, doi = {10.25932/publishup-53458}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-534586}, school = {Universit{\"a}t Potsdam}, pages = {iii, 218}, year = {2021}, abstract = {Die stetige Weiterentwicklung von VR-Systemen bietet neue M{\"o}glichkeiten der Interaktion mit virtuellen Objekten im dreidimensionalen Raum, stellt Entwickelnde von VRAnwendungen aber auch vor neue Herausforderungen. Selektions- und Manipulationstechniken m{\"u}ssen unter Ber{\"u}cksichtigung des Anwendungsszenarios, der Zielgruppe und der zur Verf{\"u}gung stehenden Ein- und Ausgabeger{\"a}te ausgew{\"a}hlt werden. Diese Arbeit leistet einen Beitrag dazu, die Auswahl von passenden Interaktionstechniken zu unterst{\"u}tzen. Hierf{\"u}r wurde eine repr{\"a}sentative Menge von Selektions- und Manipulationstechniken untersucht und, unter Ber{\"u}cksichtigung existierender Klassifikationssysteme, eine Taxonomie entwickelt, die die Analyse der Techniken hinsichtlich interaktionsrelevanter Eigenschaften erm{\"o}glicht. Auf Basis dieser Taxonomie wurden Techniken ausgew{\"a}hlt, die in einer explorativen Studie verglichen wurden, um R{\"u}ckschl{\"u}sse auf die Dimensionen der Taxonomie zu ziehen und neue Indizien f{\"u}r Vor- und Nachteile der Techniken in spezifischen Anwendungsszenarien zu generieren. Die Ergebnisse der Arbeit m{\"u}nden in eine Webanwendung, die Entwickelnde von VR-Anwendungen gezielt dabei unterst{\"u}tzt, passende Selektions- und Manipulationstechniken f{\"u}r ein Anwendungsszenario auszuw{\"a}hlen, indem Techniken auf Basis der Taxonomie gefiltert und unter Verwendung der Resultate aus der Studie sortiert werden k{\"o}nnen.}, language = {de} } @phdthesis{Sahlmann2021, author = {Sahlmann, Kristina}, title = {Network management with semantic descriptions for interoperability on the Internet of Things}, doi = {10.25932/publishup-52984}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-529846}, school = {Universit{\"a}t Potsdam}, pages = {x, 272}, year = {2021}, abstract = {The Internet of Things (IoT) is a system of physical objects that can be discovered, monitored, controlled, or interacted with by electronic devices that communicate over various networking interfaces and eventually can be connected to the wider Internet. [Guinard and Trifa, 2016]. IoT devices are equipped with sensors and/or actuators and may be constrained in terms of memory, computational power, network bandwidth, and energy. Interoperability can help to manage such heterogeneous devices. Interoperability is the ability of different types of systems to work together smoothly. There are four levels of interoperability: physical, network and transport, integration, and data. The data interoperability is subdivided into syntactic and semantic data. Semantic data describes the meaning of data and the common understanding of vocabulary e.g. with the help of dictionaries, taxonomies, ontologies. To achieve interoperability, semantic interoperability is necessary. Many organizations and companies are working on standards and solutions for interoperability in the IoT. However, the commercial solutions produce a vendor lock-in. They focus on centralized approaches such as cloud-based solutions. This thesis proposes a decentralized approach namely Edge Computing. Edge Computing is based on the concepts of mesh networking and distributed processing. This approach has an advantage that information collection and processing are placed closer to the sources of this information. The goals are to reduce traffic, latency, and to be robust against a lossy or failed Internet connection. We see management of IoT devices from the network configuration management perspective. This thesis proposes a framework for network configuration management of heterogeneous, constrained IoT devices by using semantic descriptions for interoperability. The MYNO framework is an acronym for MQTT, YANG, NETCONF and Ontology. The NETCONF protocol is the IETF standard for network configuration management. The MQTT protocol is the de-facto standard in the IoT. We picked up the idea of the NETCONF-MQTT bridge, originally proposed by Scheffler and Bonneß[2017], and extended it with semantic device descriptions. These device descriptions provide a description of the device capabilities. They are based on the oneM2M Base ontology and formalized by the Semantic Web Standards. The novel approach is using a ontology-based device description directly on a constrained device in combination with the MQTT protocol. The bridge was extended in order to query such descriptions. Using a semantic annotation, we achieved that the device capabilities are self-descriptive, machine readable and re-usable. The concept of a Virtual Device was introduced and implemented, based on semantic device descriptions. A Virtual Device aggregates the capabilities of all devices at the edge network and contributes therefore to the scalability. Thus, it is possible to control all devices via a single RPC call. The model-driven NETCONF Web-Client is generated automatically from this YANG model which is generated by the bridge based on the semantic device description. The Web-Client provides a user-friendly interface, offers RPC calls and displays sensor values. We demonstrate the feasibility of this approach in different use cases: sensor and actuator scenarios, as well as event configuration and triggering. The semantic approach results in increased memory overhead. Therefore, we evaluated CBOR and RDF HDT for optimization of ontology-based device descriptions for use on constrained devices. The evaluation shows that CBOR is not suitable for long strings and RDF HDT is a promising candidate but is still a W3C Member Submission. Finally, we used an optimized JSON-LD format for the syntax of the device descriptions. One of the security tasks of network management is the distribution of firmware updates. The MYNO Update Protocol (MUP) was developed and evaluated on constrained devices CC2538dk and 6LoWPAN. The MYNO update process is focused on freshness and authenticity of the firmware. The evaluation shows that it is challenging but feasible to bring the firmware updates to constrained devices using MQTT. As a new requirement for the next MQTT version, we propose to add a slicing feature for the better support of constrained devices. The MQTT broker should slice data to the maximum packet size specified by the device and transfer it slice-by-slice. For the performance and scalability evaluation of MYNO framework, we setup the High Precision Agriculture demonstrator with 10 ESP-32 NodeMCU boards at the edge of the network. The ESP-32 NodeMCU boards, connected by WLAN, were equipped with six sensors and two actuators. The performance evaluation shows that the processing of ontology-based descriptions on a Raspberry Pi 3B with the RDFLib is a challenging task regarding computational power. Nevertheless, it is feasible because it must be done only once per device during the discovery process. The MYNO framework was tested with heterogeneous devices such as CC2538dk from Texas Instruments, Arduino Y{\´u}n Rev 3, and ESP-32 NodeMCU, and IP-based networks such as 6LoWPAN and WLAN. Summarizing, with the MYNO framework we could show that the semantic approach on constrained devices is feasible in the IoT.}, language = {en} } @phdthesis{Andjelkovic2021, author = {Andjelkovic, Marko}, title = {A methodology for characterization, modeling and mitigation of single event transient effects in CMOS standard combinational cells}, doi = {10.25932/publishup-53484}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-534843}, school = {Universit{\"a}t Potsdam}, pages = {xxiv, 216}, year = {2021}, abstract = {With the downscaling of CMOS technologies, the radiation-induced Single Event Transient (SET) effects in combinational logic have become a critical reliability issue for modern integrated circuits (ICs) intended for operation under harsh radiation conditions. The SET pulses generated in combinational logic may propagate through the circuit and eventually result in soft errors. It has thus become an imperative to address the SET effects in the early phases of the radiation-hard IC design. In general, the soft error mitigation solutions should accommodate both static and dynamic measures to ensure the optimal utilization of available resources. An efficient soft-error-aware design should address synergistically three main aspects: (i) characterization and modeling of soft errors, (ii) multi-level soft error mitigation, and (iii) online soft error monitoring. Although significant results have been achieved, the effectiveness of SET characterization methods, accuracy of predictive SET models, and efficiency of SET mitigation measures are still critical issues. Therefore, this work addresses the following topics: (i) Characterization and modeling of SET effects in standard combinational cells, (ii) Static mitigation of SET effects in standard combinational cells, and (iii) Online particle detection, as a support for dynamic soft error mitigation. Since the standard digital libraries are widely used in the design of radiation-hard ICs, the characterization of SET effects in standard cells and the availability of accurate SET models for the Soft Error Rate (SER) evaluation are the main prerequisites for efficient radiation-hard design. This work introduces an approach for the SPICE-based standard cell characterization with the reduced number of simulations, improved SET models and optimized SET sensitivity database. It has been shown that the inherent similarities in the SET response of logic cells for different input levels can be utilized to reduce the number of required simulations. Based on characterization results, the fitting models for the SET sensitivity metrics (critical charge, generated SET pulse width and propagated SET pulse width) have been developed. The proposed models are based on the principle of superposition, and they express explicitly the dependence of the SET sensitivity of individual combinational cells on design, operating and irradiation parameters. In contrast to the state-of-the-art characterization methodologies which employ extensive look-up tables (LUTs) for storing the simulation results, this work proposes the use of LUTs for storing the fitting coefficients of the SET sensitivity models derived from the characterization results. In that way the amount of characterization data in the SET sensitivity database is reduced significantly. The initial step in enhancing the robustness of combinational logic is the application of gate-level mitigation techniques. As a result, significant improvement of the overall SER can be achieved with minimum area, delay and power overheads. For the SET mitigation in standard cells, it is essential to employ the techniques that do not require modifying the cell structure. This work introduces the use of decoupling cells for improving the robustness of standard combinational cells. By insertion of two decoupling cells at the output of a target cell, the critical charge of the cell's output node is increased and the attenuation of short SETs is enhanced. In comparison to the most common gate-level techniques (gate upsizing and gate duplication), the proposed approach provides better SET filtering. However, as there is no single gate-level mitigation technique with optimal performance, a combination of multiple techniques is required. This work introduces a comprehensive characterization of gate-level mitigation techniques aimed to quantify their impact on the SET robustness improvement, as well as introduced area, delay and power overhead per gate. By characterizing the gate-level mitigation techniques together with the standard cells, the required effort in subsequent SER analysis of a target design can be reduced. The characterization database of the hardened standard cells can be utilized as a guideline for selection of the most appropriate mitigation solution for a given design. As a support for dynamic soft error mitigation techniques, it is important to enable the online detection of energetic particles causing the soft errors. This allows activating the power-greedy fault-tolerant configurations based on N-modular redundancy only at the high radiation levels. To enable such a functionality, it is necessary to monitor both the particle flux and the variation of particle LET, as these two parameters contribute significantly to the system SER. In this work, a particle detection approach based on custom-sized pulse stretching inverters is proposed. Employing the pulse stretching inverters connected in parallel enables to measure the particle flux in terms of the number of detected SETs, while the particle LET variations can be estimated from the distribution of SET pulse widths. This approach requires a purely digital processing logic, in contrast to the standard detectors which require complex mixed-signal processing. Besides the possibility of LET monitoring, additional advantages of the proposed particle detector are low detection latency and power consumption, and immunity to error accumulation. The results achieved in this thesis can serve as a basis for establishment of an overall soft-error-aware database for a given digital library, and a comprehensive multi-level radiation-hard design flow that can be implemented with the standard IC design tools. The following step will be to evaluate the achieved results with the irradiation experiments.}, language = {en} } @misc{HollmannFrohmeEndrullatetal.2020, author = {Hollmann, Susanne and Frohme, Marcus and Endrullat, Christoph and Kremer, Andreas and D'Elia, Domenica and Regierer, Babette and Nechyporenko, Alina}, title = {Ten simple rules on how to write a standard operating procedure}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {9}, issn = {1866-8372}, doi = {10.25932/publishup-52587}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-525877}, pages = {12}, year = {2020}, abstract = {Research publications and data nowadays should be publicly available on the internet and, theoretically, usable for everyone to develop further research, products, or services. The long-term accessibility of research data is, therefore, fundamental in the economy of the research production process. However, the availability of data is not sufficient by itself, but also their quality must be verifiable. Measures to ensure reuse and reproducibility need to include the entire research life cycle, from the experimental design to the generation of data, quality control, statistical analysis, interpretation, and validation of the results. Hence, high-quality records, particularly for providing a string of documents for the verifiable origin of data, are essential elements that can act as a certificate for potential users (customers). These records also improve the traceability and transparency of data and processes, therefore, improving the reliability of results. Standards for data acquisition, analysis, and documentation have been fostered in the last decade driven by grassroot initiatives of researchers and organizations such as the Research Data Alliance (RDA). Nevertheless, what is still largely missing in the life science academic research are agreed procedures for complex routine research workflows. Here, well-crafted documentation like standard operating procedures (SOPs) offer clear direction and instructions specifically designed to avoid deviations as an absolute necessity for reproducibility. Therefore, this paper provides a standardized workflow that explains step by step how to write an SOP to be used as a starting point for appropriate research documentation.}, language = {en} } @misc{SahlmannClemensNowaketal.2020, author = {Sahlmann, Kristina and Clemens, Vera and Nowak, Michael and Schnor, Bettina}, title = {MUP}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1094}, issn = {1866-8372}, doi = {10.25932/publishup-48901}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489013}, pages = {23}, year = {2020}, abstract = {Message Queuing Telemetry Transport (MQTT) is one of the dominating protocols for edge- and cloud-based Internet of Things (IoT) solutions. When a security vulnerability of an IoT device is known, it has to be fixed as soon as possible. This requires a firmware update procedure. In this paper, we propose a secure update protocol for MQTT-connected devices which ensures the freshness of the firmware, authenticates the new firmware and considers constrained devices. We show that the update protocol is easy to integrate in an MQTT-based IoT network using a semantic approach. The feasibility of our approach is demonstrated by a detailed performance analysis of our prototype implementation on a IoT device with 32 kB RAM. Thereby, we identify design issues in MQTT 5 which can help to improve the support of constrained devices.}, language = {en} } @article{LuckeHaferHartmann2020, author = {Lucke, Ulrike and Hafer, J{\"o}rg and Hartmann, Niklas}, title = {Strategieentwicklung in der Hochschule als partizipativer Prozess}, series = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, journal = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-498-2}, issn = {2192-1075}, doi = {10.25932/publishup-49276}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-492764}, pages = {99 -- 117}, year = {2020}, abstract = {Die Setzung strategischer Ziele sowie die Zuordnung und Umsetzung dazugeh{\"o}render Maßnahmen sind ein wesentliches Element, um die Innovationsf{\"a}higkeit von Organisationen zu erhalten. In den vergangenen Jahren ist auch an Hochschulen die Strategiebildung deutlich vorangetrieben worden. Dies betrifft verschiedene Handlungsfelder, und es werden verschiedene Ans{\"a}tze verfolgt. Der vorliegende Beitrag greift am Beispiel der Universit{\"a}t Potsdam drei in den vergangenen Jahren adressierte Strategiebereiche heraus: IT, E-Learning und Forschungsdaten. Die damit verbundenen Prozesse waren in unterschiedlichem Maß von Partizipation gepr{\"a}gt. Die gesammelten Erfahrungen werden reflektiert, und es werden Empfehlungen f{\"u}r Strategieentwicklungsprozesse abgeleitet.}, language = {de} } @article{StrickrothKiy2020, author = {Strickroth, Sven and Kiy, Alexander}, title = {E-Assessment etablieren}, series = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, journal = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-498-2}, issn = {2192-1075}, doi = {10.25932/publishup-49303}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-493036}, pages = {257 -- 272}, year = {2020}, abstract = {Elektronische Lernstandserhebungen, sogenannte E-Assessments, bieten f{\"u}r Lehrende und Studierende viele Vorteile z. B. hinsichtlich schneller R{\"u}ckmeldungen oder kompetenzorientierter Fragenformate, und erm{\"o}glichen es, unabh{\"a}ngig von Ort und Zeit Pr{\"u}fungen zu absolvieren. In diesem Beitrag werden die Einf{\"u}hrung von summativen Lernstandserhebungen, sogenannter E-Klausuren, am Beispiel der Universit{\"a}t Potsdam, der Aufbau einer l{\"a}nder{\"u}bergreifenden Initiative f{\"u}r E-Assessment sowie technische M{\"o}glichkeiten f{\"u}r dezentrale elektronische Klausuren vorgestellt. Dabei werden der aktuelle Stand, die Ziele und die gew{\"a}hlte stufenweise Umsetzungsstrategie der Universit{\"a}t Potsdam skizziert. Darauf aufbauend folgt eine Beschreibung des Vorgehens, der Kooperationsm{\"o}glichkeiten f{\"u}r den Wissens- und Erfahrungsaustausch sowie Herausforderungen der E-Assessment- Initiative. Abschließend werden verschiedene E-Klausurformen und technische M{\"o}glichkeiten zur Umsetzung komplexer Pr{\"u}fungsumgebungen klassifiziert sowie mit ihren charakteristischen Vor- und Nachteilen diskutiert und eine integrierte L{\"o}sung vorgeschlagen.}, language = {de} } @article{LuckeStrickroth2020, author = {Lucke, Ulrike and Strickroth, Sven}, title = {Digitalisierung in Lehre und Studium}, series = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, journal = {Potsdamer Beitr{\"a}ge zur Hochschulforschung}, number = {6}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-498-2}, issn = {2192-1075}, doi = {10.25932/publishup-49302}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-493024}, pages = {235 -- 255}, year = {2020}, abstract = {Das gr{\"o}ßte der f{\"a}cher{\"u}bergreifenden Projekte im Potsdamer Projekt Qualit{\"a}tspakt Lehre hatte die fl{\"a}chendeckende Etablierung von digitalen Medien als einen integralen Bestandteil von Lehre und Studium zum Gegenstand. Im Teilprojekt E-Learning in Studienbereichen (eLiS) wurden daf{\"u}r Maßnahmen in den Feldern Organisations-, technische und Inhaltsentwicklung zusammengef{\"u}hrt. Der vorliegende Beitrag pr{\"a}sentiert auf Basis von Ausgangslage und Zielsetzungen die Ergebnisse rund um die Digitalisierung von Lehre und Studium an der Universit{\"a}t Potsdam. Exemplarisch werden f{\"u}nf Dienste n{\"a}her vorgestellt, die inzwischen gr{\"o}ßtenteils in den Regelbetrieb der Hochschule {\"u}bergegangen sind: die Videoplattform Media.UP, die mobile App Reflect.UP, die pers{\"o}nliche Lernumgebung Campus. UP, das Self-Service-Portal Cook.UP und das Anzeigesystem Freiraum.UP. Dabei wird jeweils ein technischer Blick „unter die Haube" verbunden mit einer Erl{\"a}uterung der Nutzungsm{\"o}glichkeiten, denen eine aktuelle Einsch{\"a}tzung von Lehrenden und Studierenden der Hochschule gegen{\"u}bergestellt wird. Der Beitrag schließt mit einer Einbettung der vorgestellten Entwicklungen in einen gr{\"o}ßeren Kontext und einem Ausblick auf die weiterhin anstehenden Aufgaben.}, language = {de} } @phdthesis{Nordmann2020, author = {Nordmann, Paul-Patrick}, title = {Fehlerkorrektur von Speicherfehlern mit Low-Density-Parity-Check-Codes}, doi = {10.25932/publishup-48048}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-480480}, school = {Universit{\"a}t Potsdam}, pages = {IV, 99, XII}, year = {2020}, abstract = {Die Fehlerkorrektur in der Codierungstheorie besch{\"a}ftigt sich mit der Erkennung und Behebung von Fehlern bei der {\"U}bertragung und auch Sicherung von Nachrichten. Hierbei wird die Nachricht durch zus{\"a}tzliche Informationen in ein Codewort kodiert. Diese Kodierungsverfahren besitzen verschiedene Anspr{\"u}che, wie zum Beispiel die maximale Anzahl der zu korrigierenden Fehler und die Geschwindigkeit der Korrektur. Ein g{\"a}ngiges Codierungsverfahren ist der BCH-Code, welches industriell f{\"u}r bis zu vier Fehler korrigiere Codes Verwendung findet. Ein Nachteil dieser Codes ist die technische Durchlaufzeit f{\"u}r die Berechnung der Fehlerstellen mit zunehmender Codel{\"a}nge. Die Dissertation stellt ein neues Codierungsverfahren vor, bei dem durch spezielle Anordnung kleinere Codel{\"a}ngen eines BCH-Codes ein langer Code erzeugt wird. Diese Anordnung geschieht {\"u}ber einen weiteren speziellen Code, einem LDPC-Code, welcher f{\"u}r eine schneller Fehlererkennung konzipiert ist. Hierf{\"u}r wird ein neues Konstruktionsverfahren vorgestellt, welches einen Code f{\"u}r einen beliebige L{\"a}nge mit vorgebbaren beliebigen Anzahl der zu korrigierenden Fehler vorgibt. Das vorgestellte Konstruktionsverfahren erzeugt zus{\"a}tzlich zum schnellen Verfahren der Fehlererkennung auch eine leicht und schnelle Ableitung eines Verfahrens zu Kodierung der Nachricht zum Codewort. Dies ist in der Literatur f{\"u}r die LDPC-Codes bis zum jetzigen Zeitpunkt einmalig. Durch die Konstruktion eines LDPC-Codes wird ein Verfahren vorgestellt wie dies mit einem BCH-Code kombiniert wird, wodurch eine Anordnung des BCH-Codes in Bl{\"o}cken erzeugt wird. Neben der allgemeinen Beschreibung dieses Codes, wird ein konkreter Code f{\"u}r eine 2-Bitfehlerkorrektur beschrieben. Diese besteht aus zwei Teilen, welche in verschiedene Varianten beschrieben und verglichen werden. F{\"u}r bestimmte L{\"a}ngen des BCH-Codes wird ein Problem bei der Korrektur aufgezeigt, welche einer algebraischen Regel folgt. Der BCH-Code wird sehr allgemein beschrieben, doch existiert durch bestimmte Voraussetzungen ein BCH-Code im engerem Sinne, welcher den Standard vorgibt. Dieser BCH-Code im engerem Sinne wird in dieser Dissertation modifiziert, so dass das algebraische Problem bei der 2-Bitfehler Korrektur bei der Kombination mit dem LDPC-Code nicht mehr existiert. Es wird gezeigt, dass nach der Modifikation der neue Code weiterhin ein BCH-Code im allgemeinen Sinne ist, welcher 2-Bitfehler korrigieren und 3-Bitfehler erkennen kann. Bei der technischen Umsetzung der Fehlerkorrektur wird des Weiteren gezeigt, dass die Durchlaufzeiten des modifizierten Codes im Vergleich zum BCH-Code schneller ist und weiteres Potential f{\"u}r Verbesserungen besitzt. Im letzten Kapitel wird gezeigt, dass sich dieser modifizierte Code mit beliebiger L{\"a}nge eignet f{\"u}r die Kombination mit dem LDPC-Code, wodurch dieses Verfahren nicht nur umf{\"a}nglicher in der L{\"a}nge zu nutzen ist, sondern auch durch die schnellere Dekodierung auch weitere Vorteile gegen{\"u}ber einem BCH-Code im engerem Sinne besitzt.}, language = {de} } @phdthesis{AbdelwahabHusseinAbdelwahabElsayed2019, author = {Abdelwahab Hussein Abdelwahab Elsayed, Ahmed}, title = {Probabilistic, deep, and metric learning for biometric identification from eye movements}, doi = {10.25932/publishup-46798}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-467980}, school = {Universit{\"a}t Potsdam}, pages = {vi, 65}, year = {2019}, abstract = {A central insight from psychological studies on human eye movements is that eye movement patterns are highly individually characteristic. They can, therefore, be used as a biometric feature, that is, subjects can be identified based on their eye movements. This thesis introduces new machine learning methods to identify subjects based on their eye movements while viewing arbitrary content. The thesis focuses on probabilistic modeling of the problem, which has yielded the best results in the most recent literature. The thesis studies the problem in three phases by proposing a purely probabilistic, probabilistic deep learning, and probabilistic deep metric learning approach. In the first phase, the thesis studies models that rely on psychological concepts about eye movements. Recent literature illustrates that individual-specific distributions of gaze patterns can be used to accurately identify individuals. In these studies, models were based on a simple parametric family of distributions. Such simple parametric models can be robustly estimated from sparse data, but have limited flexibility to capture the differences between individuals. Therefore, this thesis proposes a semiparametric model of gaze patterns that is flexible yet robust for individual identification. These patterns can be understood as domain knowledge derived from psychological literature. Fixations and saccades are examples of simple gaze patterns. The proposed semiparametric densities are drawn under a Gaussian process prior centered at a simple parametric distribution. Thus, the model will stay close to the parametric class of densities if little data is available, but it can also deviate from this class if enough data is available, increasing the flexibility of the model. The proposed method is evaluated on a large-scale dataset, showing significant improvements over the state-of-the-art. Later, the thesis replaces the model based on gaze patterns derived from psychological concepts with a deep neural network that can learn more informative and complex patterns from raw eye movement data. As previous work has shown that the distribution of these patterns across a sequence is informative, a novel statistical aggregation layer called the quantile layer is introduced. It explicitly fits the distribution of deep patterns learned directly from the raw eye movement data. The proposed deep learning approach is end-to-end learnable, such that the deep model learns to extract informative, short local patterns while the quantile layer learns to approximate the distributions of these patterns. Quantile layers are a generic approach that can converge to standard pooling layers or have a more detailed description of the features being pooled, depending on the problem. The proposed model is evaluated in a large-scale study using the eye movements of subjects viewing arbitrary visual input. The model improves upon the standard pooling layers and other statistical aggregation layers proposed in the literature. It also improves upon the state-of-the-art eye movement biometrics by a wide margin. Finally, for the model to identify any subject — not just the set of subjects it is trained on — a metric learning approach is developed. Metric learning learns a distance function over instances. The metric learning model maps the instances into a metric space, where sequences of the same individual are close, and sequences of different individuals are further apart. This thesis introduces a deep metric learning approach with distributional embeddings. The approach represents sequences as a set of continuous distributions in a metric space; to achieve this, a new loss function based on Wasserstein distances is introduced. The proposed method is evaluated on multiple domains besides eye movement biometrics. This approach outperforms the state of the art in deep metric learning in several domains while also outperforming the state of the art in eye movement biometrics.}, language = {en} } @misc{Fandinno2019, author = {Fandinno, Jorge}, title = {Founded (auto)epistemic equilibrium logic satisfies epistemic splitting}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1060}, issn = {1866-8372}, doi = {10.25932/publishup-46968}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469685}, pages = {671 -- 687}, year = {2019}, abstract = {In a recent line of research, two familiar concepts from logic programming semantics (unfounded sets and splitting) were extrapolated to the case of epistemic logic programs. The property of epistemic splitting provides a natural and modular way to understand programs without epistemic cycles but, surprisingly, was only fulfilled by Gelfond's original semantics (G91), among the many proposals in the literature. On the other hand, G91 may suffer from a kind of self-supported, unfounded derivations when epistemic cycles come into play. Recently, the absence of these derivations was also formalised as a property of epistemic semantics called foundedness. Moreover, a first semantics proved to satisfy foundedness was also proposed, the so-called Founded Autoepistemic Equilibrium Logic (FAEEL). In this paper, we prove that FAEEL also satisfies the epistemic splitting property something that, together with foundedness, was not fulfilled by any other approach up to date. To prove this result, we provide an alternative characterisation of FAEEL as a combination of G91 with a simpler logic we called Founded Epistemic Equilibrium Logic (FEEL), which is somehow an extrapolation of the stable model semantics to the modal logic S5.}, language = {en} } @misc{AguadoCabalarFandinnoetal.2019, author = {Aguado, Felicidad and Cabalar, Pedro and Fandinno, Jorge and Pearce, David and Perez, Gilberto and Vidal, Concepcion}, title = {Revisiting explicit negation in answer set programming}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1104}, issn = {1866-8372}, doi = {10.25932/publishup-46969}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469697}, pages = {908 -- 924}, year = {2019}, abstract = {A common feature in Answer Set Programming is the use of a second negation, stronger than default negation and sometimes called explicit, strong or classical negation. This explicit negation is normally used in front of atoms, rather than allowing its use as a regular operator. In this paper we consider the arbitrary combination of explicit negation with nested expressions, as those defined by Lifschitz, Tang and Turner. We extend the concept of reduct for this new syntax and then prove that it can be captured by an extension of Equilibrium Logic with this second negation. We study some properties of this variant and compare to the already known combination of Equilibrium Logic with Nelson's strong negation.}, language = {en} } @misc{Strickroth2019, author = {Strickroth, Sven}, title = {PLATON}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {804}, issn = {1866-8372}, doi = {10.25932/publishup-44188}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441887}, pages = {28}, year = {2019}, abstract = {Lesson planning is both an important and demanding task—especially as part of teacher training. This paper presents the requirements for a lesson planning system and evaluates existing systems regarding these requirements. One major drawback of existing software tools is that most are limited to a text- or form-based representation of the lesson designs. In this article, a new approach with a graphical, time-based representation with (automatic) analyses methods is proposed and the system architecture and domain model are described in detail. The approach is implemented in an interactive, web-based prototype called PLATON, which additionally supports the management of lessons in units as well as the modelling of teacher and student-generated resources. The prototype was evaluated in a study with 61 prospective teachers (bachelor's and master's preservice teachers as well as teacher trainees in post-university teacher training) in Berlin, Germany, with a focus on usability. The results show that this approach proofed usable for lesson planning and offers positive effects for the perception of time and self-reflection.}, language = {en} } @phdthesis{Schneider2019, author = {Schneider, Jan Niklas}, title = {Computational approaches for emotion research}, doi = {10.25932/publishup-45927}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-459275}, school = {Universit{\"a}t Potsdam}, pages = {xv, 145}, year = {2019}, abstract = {Emotionen sind ein zentrales Element menschlichen Erlebens und spielen eine wichtige Rolle bei der Entscheidungsfindung. Diese Dissertation identifiziert drei methodische Probleme der aktuellen Emotionsforschung und zeigt auf, wie diese mittels computergest{\"u}tzter Methoden gel{\"o}st werden k{\"o}nnen. Dieser Ansatz wird in drei Forschungsprojekten demonstriert, die die Entwicklung solcher Methoden sowie deren Anwendung auf konkrete Forschungsfragen beschreiben. Das erste Projekt beschreibt ein Paradigma welches es erm{\"o}glicht, die subjektive und objektive Schwierigkeit der Emotionswahrnehmung zu messen. Dar{\"u}ber hinaus erm{\"o}glicht es die Verwendung einer beliebigen Anzahl von Emotionskategorien im Vergleich zu den {\"u}blichen sechs Kategorien der Basisemotionen. Die Ergebnisse deuten auf eine Zunahme der Schwierigkeiten bei der Wahrnehmung von Emotionen mit zunehmendem Alter der Darsteller hin und liefern Hinweise darauf, dass junge Erwachsene, {\"a}ltere Menschen und M{\"a}nner ihre Schwierigkeit bei der Wahrnehmung von Emotionen untersch{\"a}tzen. Weitere Analysen zeigten eine geringe Relevanz personenbezogener Variablen und deuteten darauf hin, dass die Schwierigkeit der Emotionswahrnehmung vornehmlich durch die Auspr{\"a}gung der Wertigkeit des Ausdrucks bestimmt wird. Das zweite Projekt zeigt am Beispiel von Arousal, einem etablierten, aber vagen Konstrukt der Emotionsforschung, wie Face-Tracking-Daten dazu genutzt werden k{\"o}nnen solche Konstrukte zu sch{\"a}rfen. Es beschreibt, wie aus Face-Tracking-Daten Maße f{\"u}r die Entfernung, Geschwindigkeit und Beschleunigung von Gesichtsausdr{\"u}cken berechnet werden k{\"o}nnen. Das Projekt untersuchte wie diesen Maße mit der Arousal-Wahrnehmung in Menschen mit und ohne Autismus zusammenh{\"a}ngen. Der Abstand zum Neutralgesicht war pr{\"a}diktiv f{\"u}r die Arousal-Bewertungen in beiden Gruppen. Die Ergebnisse deuten auf eine qualitativ {\"a}hnliche Wahrnehmung von Arousal f{\"u}r Menschen mit und ohne Autismus hin. Im dritten Projekt stellen wir die Partial-Least-Squares-Analyse als allgemeine Methode vor, um eine optimale Repr{\"a}sentation zur Verkn{\"u}pfung zweier hochdimensionale Datens{\"a}tze zu finden. Das Projekt demonstriert die Anwendbarkeit dieser Methode in der Emotionsforschung anhand der Frage nach Unterschieden in der Emotionswahrnehmung zwischen M{\"a}nnern und Frauen. Wir konnten zeigen, dass die emotionale Wahrnehmung von Frauen systematisch mehr Varianz der Gesichtsausdr{\"u}cke erfasst und dass signifikante Unterschiede in der Art und Weise bestehen, wie Frauen und M{\"a}nner einige Gesichtsausdr{\"u}cke wahrnehmen. Diese konnten wir als dynamische Gesichtsausdr{\"u}cke visualisieren. Um die Anwendung der entwickelten Methode f{\"u}r die Forschungsgemeinschaft zu erleichtern, wurde ein Software-Paket f{\"u}r die Statistikumgebung R geschrieben. Zudem wurde eine Website entwickelt (thisemotiondoesnotexist.com), die es Besuchern erlaubt, ein Partial-Least-Squares-Modell von Emotionsbewertungen und Face-Tracking-Daten interaktiv zu erkunden, um die entwickelte Methode zu verbreiten und ihren Nutzen f{\"u}r die Emotionsforschung zu illustrieren.}, language = {en} } @phdthesis{Boehne2019, author = {B{\"o}hne, Sebastian}, title = {Different degrees of formality}, doi = {10.25932/publishup-42379}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-423795}, school = {Universit{\"a}t Potsdam}, pages = {VI, 167}, year = {2019}, abstract = {In this thesis we introduce the concept of the degree of formality. It is directed against a dualistic point of view, which only distinguishes between formal and informal proofs. This dualistic attitude does not respect the differences between the argumentations classified as informal and it is unproductive because the individual potential of the respective argumentation styles cannot be appreciated and remains untapped. This thesis has two parts. In the first of them we analyse the concept of the degree of formality (including a discussion about the respective benefits for each degree) while in the second we demonstrate its usefulness in three case studies. In the first case study we will repair Haskell B. Curry's view of mathematics, which incidentally is of great importance in the first part of this thesis, in light of the different degrees of formality. In the second case study we delineate how awareness of the different degrees of formality can be used to help students to learn how to prove. Third, we will show how the advantages of proofs of different degrees of formality can be combined by the development of so called tactics having a medium degree of formality. Together the three case studies show that the degrees of formality provide a convincing solution to the problem of untapped potential.}, language = {en} } @misc{AfantenosPeldszusStede2018, author = {Afantenos, Stergos and Peldszus, Andreas and Stede, Manfred}, title = {Comparing decoding mechanisms for parsing argumentative structures}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1062}, issn = {1866-8372}, doi = {10.25932/publishup-47052}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470527}, pages = {18}, year = {2018}, abstract = {Parsing of argumentative structures has become a very active line of research in recent years. Like discourse parsing or any other natural language task that requires prediction of linguistic structures, most approaches choose to learn a local model and then perform global decoding over the local probability distributions, often imposing constraints that are specific to the task at hand. Specifically for argumentation parsing, two decoding approaches have been recently proposed: Minimum Spanning Trees (MST) and Integer Linear Programming (ILP), following similar trends in discourse parsing. In contrast to discourse parsing though, where trees are not always used as underlying annotation schemes, argumentation structures so far have always been represented with trees. Using the 'argumentative microtext corpus' [in: Argumentation and Reasoned Action: Proceedings of the 1st European Conference on Argumentation, Lisbon 2015 / Vol. 2, College Publications, London, 2016, pp. 801-815] as underlying data and replicating three different decoding mechanisms, in this paper we propose a novel ILP decoder and an extension to our earlier MST work, and then thoroughly compare the approaches. The result is that our new decoder outperforms related work in important respects, and that in general, ILP and MST yield very similar performance.}, language = {en} } @phdthesis{Ostrowski2018, author = {Ostrowski, Max}, title = {Modern constraint answer set solving}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407799}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2018}, abstract = {Answer Set Programming (ASP) is a declarative problem solving approach, combining a rich yet simple modeling language with high-performance solving capabilities. Although this has already resulted in various applications, certain aspects of such applications are more naturally modeled using variables over finite domains, for accounting for resources, fine timings, coordinates, or functions. Our goal is thus to extend ASP with constraints over integers while preserving its declarative nature. This allows for fast prototyping and elaboration tolerant problem descriptions of resource related applications. The resulting paradigm is called Constraint Answer Set Programming (CASP). We present three different approaches for solving CASP problems. The first one, a lazy, modular approach combines an ASP solver with an external system for handling constraints. This approach has the advantage that two state of the art technologies work hand in hand to solve the problem, each concentrating on its part of the problem. The drawback is that inter-constraint dependencies cannot be communicated back to the ASP solver, impeding its learning algorithm. The second approach translates all constraints to ASP. Using the appropriate encoding techniques, this results in a very fast, monolithic system. Unfortunately, due to the large, explicit representation of constraints and variables, translation techniques are restricted to small and mid-sized domains. The third approach merges the lazy and the translational approach, combining the strength of both while removing their weaknesses. To this end, we enhance the dedicated learning techniques of an ASP solver with the inferences of the translating approach in a lazy way. That is, the important knowledge is only made explicit when needed. By using state of the art techniques from neighboring fields, we provide ways to tackle real world, industrial size problems. By extending CASP to reactive solving, we open up new application areas such as online planning with continuous domains and durations.}, language = {en} } @article{DamnikGierlProskeetal.2018, author = {Damnik, Gregor and Gierl, Mark and Proske, Antje and K{\"o}rndle, Hermann and Narciss, Susanne}, title = {Automatische Erzeugung von Aufgaben als Mittel zur Erh{\"o}hung von Interaktivit{\"a}t und Adaptivit{\"a}t in digitalen Lernressourcen}, series = {E-Learning Symposium 2018}, journal = {E-Learning Symposium 2018}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, doi = {10.25932/publishup-42184}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421842}, pages = {5 -- 16}, year = {2018}, abstract = {Digitale Medien enthalten bislang vor allem Inhalte in verschiedenen Darstellungsformen. Dies allein erzeugt jedoch nur einen geringen Mehrwert zu klassischen Lernressourcen, da die Kriterien der Interaktivit{\"a}t und Adaptivit{\"a}t nicht mit einbezogen werden. Dies scheitert jedoch oft an dem damit verbundenen Erstellungsaufwand. Der folgende Beitrag zeigt, wie durch die automatische Erzeugung von Aufgaben ein hochwertiger Wissenserwerb mit digitalen Medien erm{\"o}glicht wird. Ferner werden Vor- und Nachteile der automatischen Erstellung von Aufgaben er{\"o}rtert.}, language = {de} } @article{MarianiJaisli2018, author = {Mariani, Ennio and Jaisli, Isabel}, title = {Didaktische Herausforderungen bei der Erstellung eines frei verf{\"u}gbaren Onlinekurses}, series = {E-Learning Symposium 2018}, journal = {E-Learning Symposium 2018}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, doi = {10.25932/publishup-42192}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421924}, pages = {29 -- 40}, year = {2018}, abstract = {Die Ver{\"o}ffentlichung eines global frei verf{\"u}gbaren Onlinekurses abseits der großen MOOC Plattformen bringt spezielle Herausforderungen mit sich. Neben technischen Herausforderungen sind eine effiziente Wissensvermittlung und die Erhaltung der Lernmotivation zentral. Der folgende Beitrag stellt Techniken zur Steigerung der Lerneffizienz und -motivation anhand des ARCS Modells vor. Er zeigt auf, wie die verschiedenen Techniken in der Entwicklung des Onlinekurses „Designing Sustainable Food Systems" umgesetzt wurden und inwieweit sie erfolgreich waren.}, language = {de} } @article{TscherejkinaMorgielMoebert2018, author = {Tscherejkina, Anna and Morgiel, Anna and Moebert, Tobias}, title = {Computergest{\"u}tztes Training von sozio-emotionalen Kompetenzen durch Minispiele}, series = {E-Learning Symposium 2018}, journal = {E-Learning Symposium 2018}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, doi = {10.25932/publishup-42193}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-421937}, pages = {41 -- 52}, year = {2018}, abstract = {Das Training sozioemotionaler Kompetenzen ist gerade f{\"u}r Menschen mit Autismus n{\"u}tzlich. Ein solches Training kann mithilfe einer spielbasierten Anwendung effektiv gestaltet werden. Zwei Minispiele, Mimikry und Emo-Mahjong, wurden realisiert und hinsichtlich User Experience evaluiert. Die jeweiligen Konzepte und die Evaluationsergebnisse sollen hier vorgestellt werden.}, language = {de} }