@phdthesis{Kluth2011,
  author    = {Kluth, Stephan},
  title     = {Quantitative modeling and analysis with FMC-QE},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-52987},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {The modeling and evaluation calculus FMC-QE, the Fundamental Modeling Concepts for Quanti-tative Evaluation [1], extends the Fundamental Modeling Concepts (FMC) for performance modeling and prediction. In this new methodology, the hierarchical service requests are in the main focus, because they are the origin of every service provisioning process. Similar to physics, these service requests are a tuple of value and unit, which enables hierarchical service request transformations at the hierarchical borders and therefore the hierarchical modeling. Through reducing the model complexity of the models by decomposing the system in different hierarchical views, the distinction between operational and control states and the calculation of the performance values on the assumption of the steady state, FMC-QE has a scalable applica-bility on complex systems. According to FMC, the system is modeled in a 3-dimensional hierarchical representation space, where system performance parameters are described in three arbitrarily fine-grained hierarchi-cal bipartite diagrams. The hierarchical service request structures are modeled in Entity Relationship Diagrams. The static server structures, divided into logical and real servers, are de-scribed as Block Diagrams. The dynamic behavior and the control structures are specified as Petri Nets, more precisely Colored Time Augmented Petri Nets. From the structures and pa-rameters of the performance model, a hierarchical set of equations is derived. The calculation of the performance values is done on the assumption of stationary processes and is based on fundamental laws of the performance analysis: Little's Law and the Forced Traffic Flow Law. Little's Law is used within the different hierarchical levels (horizontal) and the Forced Traffic Flow Law is the key to the dependencies among the hierarchical levels (vertical). This calculation is suitable for complex models and allows a fast (re-)calculation of different performance scenarios in order to support development and configuration decisions. Within the Research Group Zorn at the Hasso Plattner Institute, the work is embedded in a broader research in the development of FMC-QE. While this work is concentrated on the theoretical background, description and definition of the methodology as well as the extension and validation of the applicability, other topics are in the development of an FMC-QE modeling and evaluation tool and the usage of FMC-QE in the design of an adaptive transport layer in order to fulfill Quality of Service and Service Level Agreements in volatile service based environments. This thesis contains a state-of-the-art, the description of FMC-QE as well as extensions of FMC-QE in representative general models and case studies. In the state-of-the-art part of the thesis in chapter 2, an overview on existing Queueing Theory and Time Augmented Petri Net models and other quantitative modeling and evaluation languages and methodologies is given. Also other hierarchical quantitative modeling frameworks will be considered. The description of FMC-QE in chapter 3 consists of a summary of the foundations of FMC-QE, basic definitions, the graphical notations, the FMC-QE Calculus and the modeling of open queueing networks as an introductory example. The extensions of FMC-QE in chapter 4 consist of the integration of the summation method in order to support the handling of closed networks and the modeling of multiclass and semaphore scenarios. Furthermore, FMC-QE is compared to other performance modeling and evaluation approaches. In the case study part in chapter 5, proof-of-concept examples, like the modeling of a service based search portal, a service based SAP NetWeaver application and the Axis2 Web service framework will be provided. Finally, conclusions are given by a summary of contributions and an outlook on future work in chapter 6. [1] Werner Zorn. FMC-QE - A New Approach in Quantitative Modeling. In Hamid R. Arabnia, editor, Procee-dings of the International Conference on Modeling, Simulation and Visualization Methods (MSV 2007) within WorldComp '07, pages 280 - 287, Las Vegas, NV, USA, June 2007. CSREA Press. ISBN 1-60132-029-9.},
  language  = {en}
}
@phdthesis{Dawoud2013,
  author    = {Dawoud, Wesam},
  title     = {Scalability and performance management of internet applications in the cloud},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68187},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Cloud computing is a model for enabling on-demand access to a shared pool of computing resources. With virtually limitless on-demand resources, a cloud environment enables the hosted Internet application to quickly cope when there is an increase in the workload. However, the overhead of provisioning resources exposes the Internet application to periods of under-provisioning and performance degradation. Moreover, the performance interference, due to the consolidation in the cloud environment, complicates the performance management of the Internet applications. In this dissertation, we propose two approaches to mitigate the impact of the resources provisioning overhead. The first approach employs control theory to scale resources vertically and cope fast with workload. This approach assumes that the provider has knowledge and control over the platform running in the virtual machines (VMs), which limits it to Platform as a Service (PaaS) and Software as a Service (SaaS) providers. The second approach is a customer-side one that deals with the horizontal scalability in an Infrastructure as a Service (IaaS) model. It addresses the trade-off problem between cost and performance with a multi-goal optimization solution. This approach finds the scale thresholds that achieve the highest performance with the lowest increase in the cost. Moreover, the second approach employs a proposed time series forecasting algorithm to scale the application proactively and avoid under-utilization periods. Furthermore, to mitigate the interference impact on the Internet application performance, we developed a system which finds and eliminates the VMs suffering from performance interference. The developed system is a light-weight solution which does not imply provider involvement. To evaluate our approaches and the designed algorithms at large-scale level, we developed a simulator called (ScaleSim). In the simulator, we implemented scalability components acting as the scalability components of Amazon EC2. The current scalability implementation in Amazon EC2 is used as a reference point for evaluating the improvement in the scalable application performance. ScaleSim is fed with realistic models of the RUBiS benchmark extracted from the real environment. The workload is generated from the access logs of the 1998 world cup website. The results show that optimizing the scalability thresholds and adopting proactive scalability can mitigate 88\% of the resources provisioning overhead impact with only a 9\% increase in the cost.},
  language  = {en}
}
@phdthesis{Kyprianidis2013,
  author    = {Kyprianidis, Jan Eric},
  title     = {Structure adaptive stylization of images and video},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64104},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {In the early days of computer graphics, research was mainly driven by the goal to create realistic synthetic imagery. By contrast, non-photorealistic computer graphics, established as its own branch of computer graphics in the early 1990s, is mainly motivated by concepts and principles found in traditional art forms, such as painting, illustration, and graphic design, and it investigates concepts and techniques that abstract from reality using expressive, stylized, or illustrative rendering techniques. This thesis focuses on the artistic stylization of two-dimensional content and presents several novel automatic techniques for the creation of simplified stylistic illustrations from color images, video, and 3D renderings. Primary innovation of these novel techniques is that they utilize the smooth structure tensor as a simple and efficient way to obtain information about the local structure of an image. More specifically, this thesis contributes to knowledge in this field in the following ways. First, a comprehensive review of the structure tensor is provided. In particular, different methods for integrating the minor eigenvector field of the smoothed structure tensor are developed, and the superiority of the smoothed structure tensor over the popular edge tangent flow is demonstrated. Second, separable implementations of the popular bilateral and difference of Gaussians filters that adapt to the local structure are presented. These filters avoid artifacts while being computationally highly efficient. Taken together, both provide an effective way to create a cartoon-style effect. Third, a generalization of the Kuwahara filter is presented that avoids artifacts by adapting the shape, scale, and orientation of the filter to the local structure. This causes directional image features to be better preserved and emphasized, resulting in overall sharper edges and a more feature-abiding painterly effect. In addition to the single-scale variant, a multi-scale variant is presented, which is capable of performing a highly aggressive abstraction. Fourth, a technique that builds upon the idea of combining flow-guided smoothing with shock filtering is presented, allowing for an aggressive exaggeration and an emphasis of directional image features. All presented techniques are suitable for temporally coherent per-frame filtering of video or dynamic 3D renderings, without requiring expensive extra processing, such as optical flow. Moreover, they can be efficiently implemented to process content in real-time on a GPU.},
  language  = {en}
}
@phdthesis{Polyvyanyy2012,
  author    = {Polyvyanyy, Artem},
  title     = {Structuring process models},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-59024},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {One can fairly adopt the ideas of Donald E. Knuth to conclude that process modeling is both a science and an art. Process modeling does have an aesthetic sense. Similar to composing an opera or writing a novel, process modeling is carried out by humans who undergo creative practices when engineering a process model. Therefore, the very same process can be modeled in a myriad number of ways. Once modeled, processes can be analyzed by employing scientific methods. Usually, process models are formalized as directed graphs, with nodes representing tasks and decisions, and directed arcs describing temporal constraints between the nodes. Common process definition languages, such as Business Process Model and Notation (BPMN) and Event-driven Process Chain (EPC) allow process analysts to define models with arbitrary complex topologies. The absence of structural constraints supports creativity and productivity, as there is no need to force ideas into a limited amount of available structural patterns. Nevertheless, it is often preferable that models follow certain structural rules. A well-known structural property of process models is (well-)structuredness. A process model is (well-)structured if and only if every node with multiple outgoing arcs (a split) has a corresponding node with multiple incoming arcs (a join), and vice versa, such that the set of nodes between the split and the join induces a single-entry-single-exit (SESE) region; otherwise the process model is unstructured. The motivations for well-structured process models are manifold: (i) Well-structured process models are easier to layout for visual representation as their formalizations are planar graphs. (ii) Well-structured process models are easier to comprehend by humans. (iii) Well-structured process models tend to have fewer errors than unstructured ones and it is less probable to introduce new errors when modifying a well-structured process model. (iv) Well-structured process models are better suited for analysis with many existing formal techniques applicable only for well-structured process models. (v) Well-structured process models are better suited for efficient execution and optimization, e.g., when discovering independent regions of a process model that can be executed concurrently. Consequently, there are process modeling languages that encourage well-structured modeling, e.g., Business Process Execution Language (BPEL) and ADEPT. However, the well-structured process modeling implies some limitations: (i) There exist processes that cannot be formalized as well-structured process models. (ii) There exist processes that when formalized as well-structured process models require a considerable duplication of modeling constructs. Rather than expecting well-structured modeling from start, we advocate for the absence of structural constraints when modeling. Afterwards, automated methods can suggest, upon request and whenever possible, alternative formalizations that are "better" structured, preferably well-structured. In this thesis, we study the problem of automatically transforming process models into equivalent well-structured models. The developed transformations are performed under a strong notion of behavioral equivalence which preserves concurrency. The findings are implemented in a tool, which is publicly available.},
  language  = {en}
}
@phdthesis{Seibel2012,
  author    = {Seibel, Andreas},
  title     = {Traceability and model management with executable and dynamic hierarchical megamodels},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64222},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {Nowadays, model-driven engineering (MDE) promises to ease software development by decreasing the inherent complexity of classical software development. In order to deliver on this promise, MDE increases the level of abstraction and automation, through a consideration of domain-specific models (DSMs) and model operations (e.g. model transformations or code generations). DSMs conform to domain-specific modeling languages (DSMLs), which increase the level of abstraction, and model operations are first-class entities of software development because they increase the level of automation. Nevertheless, MDE has to deal with at least two new dimensions of complexity, which are basically caused by the increased linguistic and technological heterogeneity. The first dimension of complexity is setting up an MDE environment, an activity comprised of the implementation or selection of DSMLs and model operations. Setting up an MDE environment is both time-consuming and error-prone because of the implementation or adaptation of model operations. The second dimension of complexity is concerned with applying MDE for actual software development. Applying MDE is challenging because a collection of DSMs, which conform to potentially heterogeneous DSMLs, are required to completely specify a complex software system. A single DSML can only be used to describe a specific aspect of a software system at a certain level of abstraction and from a certain perspective. Additionally, DSMs are usually not independent but instead have inherent interdependencies, reflecting (partial) similar aspects of a software system at different levels of abstraction or from different perspectives. A subset of these dependencies are applications of various model operations, which are necessary to keep the degree of automation high. This becomes even worse when addressing the first dimension of complexity. Due to continuous changes, all kinds of dependencies, including the applications of model operations, must also be managed continuously. This comprises maintaining the existence of these dependencies and the appropriate (re-)application of model operations. The contribution of this thesis is an approach that combines traceability and model management to address the aforementioned challenges of configuring and applying MDE for software development. The approach is considered as a traceability approach because it supports capturing and automatically maintaining dependencies between DSMs. The approach is considered as a model management approach because it supports managing the automated (re-)application of heterogeneous model operations. In addition, the approach is considered as a comprehensive model management. Since the decomposition of model operations is encouraged to alleviate the first dimension of complexity, the subsequent composition of model operations is required to counteract their fragmentation. A significant portion of this thesis concerns itself with providing a method for the specification of decoupled yet still highly cohesive complex compositions of heterogeneous model operations. The approach supports two different kinds of compositions - data-flow compositions and context compositions. Data-flow composition is used to define a network of heterogeneous model operations coupled by sharing input and output DSMs alone. Context composition is related to a concept used in declarative model transformation approaches to compose individual model transformation rules (units) at any level of detail. In this thesis, context composition provides the ability to use a collection of dependencies as context for the composition of other dependencies, including model operations. In addition, the actual implementation of model operations, which are going to be composed, do not need to implement any composition concerns. The approach is realized by means of a formalism called an executable and dynamic hierarchical megamodel, based on the original idea of megamodels. This formalism supports specifying compositions of dependencies (traceability and model operations). On top of this formalism, traceability is realized by means of a localization concept, and model management by means of an execution concept.},
  language  = {en}
}
@phdthesis{Wang2011,
  author    = {Wang, Long},
  title     = {X-tracking the usage interest on web sites},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-51077},
  school      = {Universit{\"a}t Potsdam},
  year      = {2011},
  abstract  = {The exponential expanding of the numbers of web sites and Internet users makes WWW the most important global information resource. From information publishing and electronic commerce to entertainment and social networking, the Web allows an inexpensive and efficient access to the services provided by individuals and institutions. The basic units for distributing these services are the web sites scattered throughout the world. However, the extreme fragility of web services and content, the high competence between similar services supplied by different sites, and the wide geographic distributions of the web users drive the urgent requirement from the web managers to track and understand the usage interest of their web customers. This thesis, "X-tracking the Usage Interest on Web Sites", aims to fulfill this requirement. "X" stands two meanings: one is that the usage interest differs from various web sites, and the other is that usage interest is depicted from multi aspects: internal and external, structural and conceptual, objective and subjective. "Tracking" shows that our concentration is on locating and measuring the differences and changes among usage patterns. This thesis presents the methodologies on discovering usage interest on three kinds of web sites: the public information portal site, e-learning site that provides kinds of streaming lectures and social site that supplies the public discussions on IT issues. On different sites, we concentrate on different issues related with mining usage interest. The educational information portal sites were the first implementation scenarios on discovering usage patterns and optimizing the organization of web services. In such cases, the usage patterns are modeled as frequent page sets, navigation paths, navigation structures or graphs. However, a necessary requirement is to rebuild the individual behaviors from usage history. We give a systematic study on how to rebuild individual behaviors. Besides, this thesis shows a new strategy on building content clusters based on pair browsing retrieved from usage logs. The difference between such clusters and the original web structure displays the distance between the destinations from usage side and the expectations from design side. Moreover, we study the problem on tracking the changes of usage patterns in their life cycles. The changes are described from internal side integrating conceptual and structure features, and from external side for the physical features; and described from local side measuring the difference between two time spans, and global side showing the change tendency along the life cycle. A platform, Web-Cares, is developed to discover the usage interest, to measure the difference between usage interest and site expectation and to track the changes of usage patterns. E-learning site provides the teaching materials such as slides, recorded lecture videos and exercise sheets. We focus on discovering the learning interest on streaming lectures, such as real medias, mp4 and flash clips. Compared to the information portal site, the usage on streaming lectures encapsulates the variables such as viewing time and actions during learning processes. The learning interest is discovered in the form of answering 6 questions, which covers finding the relations between pieces of lectures and the preference among different forms of lectures. We prefer on detecting the changes of learning interest on the same course from different semesters. The differences on the content and structure between two courses leverage the changes on the learning interest. We give an algorithm on measuring the difference on learning interest integrated with similarity comparison between courses. A search engine, TASK-Moniminer, is created to help the teacher query the learning interest on their streaming lectures on tele-TASK site. Social site acts as an online community attracting web users to discuss the common topics and share their interesting information. Compared to the public information portal site and e-learning web site, the rich interactions among users and web content bring the wider range of content quality, on the other hand, provide more possibilities to express and model usage interest. We propose a framework on finding and recommending high reputation articles in a social site. We observed that the reputation is classified into global and local categories; the quality of the articles having high reputation is related with the content features. Based on these observations, our framework is implemented firstly by finding the articles having global or local reputation, and secondly clustering articles based on their content relations, and then the articles are selected and recommended from each cluster based on their reputation ranks.},
  language  = {en}
}