@article{AbdelwahabLandwehr2022, author = {Abdelwahab, Ahmed and Landwehr, Niels}, title = {Deep Distributional Sequence Embeddings Based on a Wasserstein Loss}, series = {Neural processing letters}, journal = {Neural processing letters}, publisher = {Springer}, address = {Dordrecht}, issn = {1370-4621}, doi = {10.1007/s11063-022-10784-y}, pages = {21}, year = {2022}, abstract = {Deep metric learning employs deep neural networks to embed instances into a metric space such that distances between instances of the same class are small and distances between instances from different classes are large. In most existing deep metric learning techniques, the embedding of an instance is given by a feature vector produced by a deep neural network and Euclidean distance or cosine similarity defines distances between these vectors. This paper studies deep distributional embeddings of sequences, where the embedding of a sequence is given by the distribution of learned deep features across the sequence. The motivation for this is to better capture statistical information about the distribution of patterns within the sequence in the embedding. When embeddings are distributions rather than vectors, measuring distances between embeddings involves comparing their respective distributions. The paper therefore proposes a distance metric based on Wasserstein distances between the distributions and a corresponding loss function for metric learning, which leads to a novel end-to-end trainable embedding model. We empirically observe that distributional embeddings outperform standard vector embeddings and that training with the proposed Wasserstein metric outperforms training with other distance functions.}, language = {en} } @article{MichallekGenskeNiehuesetal.2022, author = {Michallek, Florian and Genske, Ulrich and Niehues, Stefan Markus and Hamm, Bernd and Jahnke, Paul}, title = {Deep learning reconstruction improves radiomics feature stability and discriminative power in abdominal CT imaging}, series = {European Radiology}, volume = {32}, journal = {European Radiology}, number = {7}, publisher = {Springer}, address = {New York}, issn = {1432-1084}, doi = {10.1007/s00330-022-08592-y}, pages = {4587 -- 4595}, year = {2022}, abstract = {Objectives To compare image quality of deep learning reconstruction (AiCE) for radiomics feature extraction with filtered back projection (FBP), hybrid iterative reconstruction (AIDR 3D), and model-based iterative reconstruction (FIRST). Methods Effects of image reconstruction on radiomics features were investigated using a phantom that realistically mimicked a 65-year-old patient's abdomen with hepatic metastases. The phantom was scanned at 18 doses from 0.2 to 4 mGy, with 20 repeated scans per dose. Images were reconstructed with FBP, AIDR 3D, FIRST, and AiCE. Ninety-three radiomics features were extracted from 24 regions of interest, which were evenly distributed across three tissue classes: normal liver, metastatic core, and metastatic rim. Features were analyzed in terms of their consistent characterization of tissues within the same image (intraclass correlation coefficient >= 0.75), discriminative power (Kruskal-Wallis test p value < 0.05), and repeatability (overall concordance correlation coefficient >= 0.75). Results The median fraction of consistent features across all doses was 6\%, 8\%, 6\%, and 22\% with FBP, AIDR 3D, FIRST, and AiCE, respectively. Adequate discriminative power was achieved by 48\%, 82\%, 84\%, and 92\% of features, and 52\%, 20\%, 17\%, and 39\% of features were repeatable, respectively. Only 5\% of features combined consistency, discriminative power, and repeatability with FBP, AIDR 3D, and FIRST versus 13\% with AiCE at doses above 1 mGy and 17\% at doses >= 3 mGy. AiCE was the only reconstruction technique that enabled extraction of higher-order features. Conclusions AiCE more than doubled the yield of radiomics features at doses typically used clinically. Inconsistent tissue characterization within CT images contributes significantly to the poor stability of radiomics features.}, language = {en} } @article{BandyopadhyaySarkarMandaletal.2022, author = {Bandyopadhyay, Soumyadip and Sarkar, Dipankar and Mandal, Chittaranjan and Giese, Holger}, title = {Translation validation of coloured Petri net models of programs on integers}, series = {Acta informatica}, volume = {59}, journal = {Acta informatica}, number = {6}, publisher = {Springer}, address = {New York}, issn = {0001-5903}, doi = {10.1007/s00236-022-00419-z}, pages = {725 -- 759}, year = {2022}, abstract = {Programs are often subjected to significant optimizing and parallelizing transformations based on extensive dependence analysis. Formal validation of such transformations needs modelling paradigms which can capture both control and data dependences in the program vividly. Being value-based with an inherent scope of capturing parallelism, the untimed coloured Petri net (CPN) models, reported in the literature, fit the bill well; accordingly, they are likely to be more convenient as the intermediate representations (IRs) of both the source and the transformed codes for translation validation than strictly sequential variable-based IRs like sequential control flow graphs (CFGs). In this work, an efficient path-based equivalence checking method for CPN models of programs on integers is presented. Extensive experimentation has been carried out on several sequential and parallel examples. Complexity and correctness issues have been treated rigorously for the method.}, language = {en} } @article{ChenLangeAndjelkovicetal.2022, author = {Chen, Junchao and Lange, Thomas and Andjelkovic, Marko and Simevski, Aleksandar and Lu, Li and Krstić, Miloš}, title = {Solar particle event and single event upset prediction from SRAM-based monitor and supervised machine learning}, series = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, volume = {10}, journal = {IEEE transactions on emerging topics in computing / IEEE Computer Society, Institute of Electrical and Electronics Engineers}, number = {2}, publisher = {Institute of Electrical and Electronics Engineers}, address = {[New York, NY]}, issn = {2168-6750}, doi = {10.1109/TETC.2022.3147376}, pages = {564 -- 580}, year = {2022}, abstract = {The intensity of cosmic radiation may differ over five orders of magnitude within a few hours or days during the Solar Particle Events (SPEs), thus increasing for several orders of magnitude the probability of Single Event Upsets (SEUs) in space-borne electronic systems. Therefore, it is vital to enable the early detection of the SEU rate changes in order to ensure timely activation of dynamic radiation hardening measures. In this paper, an embedded approach for the prediction of SPEs and SRAM SEU rate is presented. The proposed solution combines the real-time SRAM-based SEU monitor, the offline-trained machine learning model and online learning algorithm for the prediction. With respect to the state-of-the-art, our solution brings the following benefits: (1) Use of existing on-chip data storage SRAM as a particle detector, thus minimizing the hardware and power overhead, (2) Prediction of SRAM SEU rate one hour in advance, with the fine-grained hourly tracking of SEU variations during SPEs as well as under normal conditions, (3) Online optimization of the prediction model for enhancing the prediction accuracy during run-time, (4) Negligible cost of hardware accelerator design for the implementation of selected machine learning model and online learning algorithm. The proposed design is intended for a highly dependable and self-adaptive multiprocessing system employed in space applications, allowing to trigger the radiation mitigation mechanisms before the onset of high radiation levels.}, language = {en} } @article{BreitenreiterAndjelkovićSchrapeetal.2022, author = {Breitenreiter, Anselm and Andjelković, Marko and Schrape, Oliver and Krstić, Miloš}, title = {Fast error propagation probability estimates by answer set programming and approximate model counting}, series = {IEEE Access}, volume = {10}, journal = {IEEE Access}, publisher = {Inst. of Electr. and Electronics Engineers}, address = {Piscataway}, issn = {2169-3536}, doi = {10.1109/ACCESS.2022.3174564}, pages = {51814 -- 51825}, year = {2022}, abstract = {We present a method employing Answer Set Programming in combination with Approximate Model Counting for fast and accurate calculation of error propagation probabilities in digital circuits. By an efficient problem encoding, we achieve an input data format similar to a Verilog netlist so that extensive preprocessing is avoided. By a tight interconnection of our application with the underlying solver, we avoid iterating over fault sites and reduce calls to the solver. Several circuits were analyzed with varying numbers of considered cycles and different degrees of approximation. Our experiments show, that the runtime can be reduced by approximation by a factor of 91, whereas the error compared to the exact result is below 1\%.}, language = {en} } @article{AndjelkovicSimevskiChenetal.2022, author = {Andjelkovic, Marko and Simevski, Aleksandar and Chen, Junchao and Schrape, Oliver and Stamenkovic, Zoran and Krstić, Miloš and Ilic, Stefan and Ristic, Goran and Jaksic, Aleksandar and Vasovic, Nikola and Duane, Russell and Palma, Alberto J. and Lallena, Antonio M. and Carvajal, Miguel A.}, title = {A design concept for radiation hardened RADFET readout system for space applications}, series = {Microprocessors and microsystems}, volume = {90}, journal = {Microprocessors and microsystems}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0141-9331}, doi = {10.1016/j.micpro.2022.104486}, pages = {18}, year = {2022}, abstract = {Instruments for measuring the absorbed dose and dose rate under radiation exposure, known as radiation dosimeters, are indispensable in space missions. They are composed of radiation sensors that generate current or voltage response when exposed to ionizing radiation, and processing electronics for computing the absorbed dose and dose rate. Among a wide range of existing radiation sensors, the Radiation Sensitive Field Effect Transistors (RADFETs) have unique advantages for absorbed dose measurement, and a proven record of successful exploitation in space missions. It has been shown that the RADFETs may be also used for the dose rate monitoring. In that regard, we propose a unique design concept that supports the simultaneous operation of a single RADFET as absorbed dose and dose rate monitor. This enables to reduce the cost of implementation, since the need for other types of radiation sensors can be minimized or eliminated. For processing the RADFET's response we propose a readout system composed of analog signal conditioner (ASC) and a self-adaptive multiprocessing system-on-chip (MPSoC). The soft error rate of MPSoC is monitored in real time with embedded sensors, allowing the autonomous switching between three operating modes (high-performance, de-stress and fault-tolerant), according to the application requirements and radiation conditions.}, language = {en} } @article{RisticIlicAndjelkovicetal.2022, author = {Ristic, Goran S. and Ilic, Stefan D. and Andjelkovic, Marko S. and Duane, Russell and Palma, Alberto J. and Lalena, Antonio M. and Krstić, Miloš and Jaksic, Aleksandar B.}, title = {Sensitivity and fading of irradiated RADFETs with different gate voltages}, series = {Nuclear Instruments and Methods in Physics Research Section A}, volume = {1029}, journal = {Nuclear Instruments and Methods in Physics Research Section A}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0168-9002}, doi = {10.1016/j.nima.2022.166473}, pages = {7}, year = {2022}, abstract = {The radiation-sensitive field-effect transistors (RADFETs) with an oxide thickness of 400 nm are irradiated with gate voltages of 2, 4 and 6 V, and without gate voltage. A detailed analysis of the mechanisms responsible for the creation of traps during irradiation is performed. The creation of the traps in the oxide, near and at the silicon/silicon-dioxide (Si/SiO2) interface during irradiation is modelled very well. This modelling can also be used for other MOS transistors containing SiO2. The behaviour of radiation traps during postirradiation annealing is analysed, and the corresponding functions for their modelling are obtained. The switching traps (STs) do not have significant influence on threshold voltage shift, and two radiation-induced trap types fit the fixed traps (FTs) very well. The fading does not depend on the positive gate voltage applied during irradiation, but it is twice lower in case there is no gate voltage. A new dosimetric parameter, called the Golden Ratio (GR), is proposed, which represents the ratio between the threshold voltage shift after irradiation and fading after spontaneous annealing. This parameter can be useful for comparing MOS dosimeters.}, language = {en} } @article{TranPontelliBalduccinietal.2022, author = {Tran, Son Cao and Pontelli, Enrico and Balduccini, Marcello and Schaub, Torsten}, title = {Answer set planning}, series = {Theory and practice of logic programming}, journal = {Theory and practice of logic programming}, publisher = {Cambridge University Press}, address = {New York}, issn = {1471-0684}, doi = {10.1017/S1471068422000072}, pages = {73}, year = {2022}, abstract = {Answer Set Planning refers to the use of Answer Set Programming (ASP) to compute plans, that is, solutions to planning problems, that transform a given state of the world to another state. The development of efficient and scalable answer set solvers has provided a significant boost to the development of ASP-based planning systems. This paper surveys the progress made during the last two and a half decades in the area of answer set planning, from its foundations to its use in challenging planning domains. The survey explores the advantages and disadvantages of answer set planning. It also discusses typical applications of answer set planning and presents a set of challenges for future research.}, language = {en} } @article{AndjelkovicMarjanovicChenetal.2022, author = {Andjelkovic, Marko and Marjanovic, Milos and Chen, Junchao and Ilic, Stefan and Ristic, Goran and Krstic, Milos}, title = {PS-BBICS: Pulse stretching bulk built-in current sensor for on-chip measurement of single event transients}, series = {Microelectronics reliability}, volume = {138}, journal = {Microelectronics reliability}, publisher = {Elsevier}, address = {Amsterdam [u.a.]}, issn = {0026-2714}, doi = {10.1016/j.microrel.2022.114726}, pages = {6}, year = {2022}, abstract = {The bulk built-in current sensor (BBICS) is a cost-effective solution for detection of energetic particle strikes in integrated circuits. With an appropriate number of BBICSs distributed across the chip, the soft error locations can be identified, and the dynamic fault-tolerant mechanisms can be activated locally to correct the soft errors in the affected logic. In this work, we introduce a pulse stretching BBICS (PS-BBICS) constructed by connecting a standard BBICS and a custom-designed pulse stretching cell. The aim of PS-BBICS is to enable the on-chip measurement of the single event transient (SET) pulse width, allowing to detect the linear energy transfer (LET) of incident particles, and thus assess more accurately the radiation conditions. Based on Spectre simula-tions, we have shown that for the LET from 1 to 100 MeV cm2 mg -1, the SET pulse width detected by PS-BBICS varies by 620-800 ps. The threshold LET of PS-BBICS increases linearly with the number of monitored inverters, and it is around 1.7 MeV cm2 mg- 1 for ten monitored inverters. On the other hand, the SET pulse width is in-dependent of the number of monitored inverters for LET > 4 MeV cm2 mg -1. It was shown that supply voltage, temperature and process variations have strong impact on the response of PS-BBICS.}, language = {en} } @article{MonteroCrucifixCoupletetal.2022, author = {Montero, Marina Mart{\´i}nez and Crucifix, Michel and Couplet, Victor and Brede, Nuria and Botta, Nicola}, title = {SURFER v2.0: a flexible and simple model linking anthropogenic CO2 emissions and solar radiation modification to ocean acidification and sea level rise}, series = {Geoscientific model development : an interactive open access journal of the European Geosciences Union}, volume = {15}, journal = {Geoscientific model development : an interactive open access journal of the European Geosciences Union}, number = {21}, publisher = {Copernicus}, address = {Katlenburg-Lindau}, issn = {1991-959X}, doi = {10.5194/gmd-15-8059-2022}, pages = {8059 -- 8084}, year = {2022}, abstract = {We present SURFER, a novel reduced model for estimating the impact of CO2 emissions and solar radiation modification options on sea level rise and ocean acidification over timescales of several thousands of years. SURFER has been designed for the analysis of CO2 emission and solar radiation modification policies, for supporting the computation of optimal (CO2 emission and solar radiation modification) policies and for the study of commitment and responsibility under uncertainty. The model is based on a combination of conservation laws for the masses of atmospheric and oceanic carbon and for the oceanic temperature anomalies, and of adhoc parameterisations for the different sea level rise contributors: ice sheets, glaciers and ocean thermal expansion. It consists of 9 loosely coupled ordinary differential equations, is understandable, fast and easy to modify and calibrate. It reproduces the results of more sophisticated, high-dimensional earth system models on timescales up to millennia.}, language = {en} }