@phdthesis{Giuri2023, author = {Giuri, Chiara}, title = {VERITAS Dark Matter search in dwarf spheroidal galaxies: an extended analysis}, doi = {10.25932/publishup-57586}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-575869}, school = {Universit{\"a}t Potsdam}, pages = {xxiv, 227}, year = {2023}, abstract = {In the last century, several astronomical measurements have supported that a significant percentage (about 22\%) of the total mass of the Universe, on galactic and extragalactic scales, is composed of a mysterious "dark" matter (DM). DM does not interact with the electromagnetic force; in other words it does not reflect, absorb or emit light. It is possible that DM particles are weakly interacting massive particles (WIMPs) that can annihilate (or decay) into Standard Model (SM) particles, and modern very- high-energy (VHE; > 100 GeV) instruments such as imaging atmospheric Cherenkov telescopes (IACTs) can play an important role in constraining the main properties of such DM particles, by detecting these products. One of the most privileged targets where to look for DM signal are dwarf spheroidal galaxies (dSphs), as they are expected to be high DM-dominated objects with a clean, gas-free environment. Some dSphs could be considered as extended sources, considering the angular resolution of IACTs; their angu- lar resolution is adequate to detect extended emission from dSphs. For this reason, we performed an extended-source analysis, by taking into account in the unbinned maximum likelihood estimation both the energy and the angular extension dependency of observed events. The goal was to set more constrained upper limits on the velocity-averaged cross-section annihilation of WIMPs with VERITAS data. VERITAS is an array of four IACTs, able to detect γ-ray photons ranging between 100 GeV and 30 TeV. The results of this extended analysis were compared against the traditional spectral analysis. We found that a 2D analysis may lead to more constrained results, depending on the DM mass, channel, and source. Moreover, in this thesis, the results of a multi-instrument project are presented too. Its goal was to combine already published 20 dSphs data from five different experiments, such as Fermi-LAT, MAGIC, H.E.S.S., VERITAS and HAWC, in order to set upper limits on the WIMP annihilation cross-section in the widest mass range ever reported.}, language = {en} } @phdthesis{Schmitz2023, author = {Schmitz, Se{\´a}n}, title = {Using low-cost sensors to gather high resolution measurements of air quality in urban environments and inform mobility policy}, doi = {10.25932/publishup-60105}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-601053}, school = {Universit{\"a}t Potsdam}, pages = {180}, year = {2023}, abstract = {Air pollution has been a persistent global problem in the past several hundred years. While some industrialized nations have shown improvements in their air quality through stricter regulation, others have experienced declines as they rapidly industrialize. The WHO's 2021 update of their recommended air pollution limit values reflects the substantial impacts on human health of pollutants such as NO2 and O3, as recent epidemiological evidence suggests substantial long-term health impacts of air pollution even at low concentrations. Alongside developments in our understanding of air pollution's health impacts, the new technology of low-cost sensors (LCS) has been taken up by both academia and industry as a new method for measuring air pollution. Due primarily to their lower cost and smaller size, they can be used in a variety of different applications, including in the development of higher resolution measurement networks, in source identification, and in measurements of air pollution exposure. While significant efforts have been made to accurately calibrate LCS with reference instrumentation and various statistical models, accuracy and precision remain limited by variable sensor sensitivity. Furthermore, standard procedures for calibration still do not exist and most proprietary calibration algorithms are black-box, inaccessible to the public. This work seeks to expand the knowledge base on LCS in several different ways: 1) by developing an open-source calibration methodology; 2) by deploying LCS at high spatial resolution in urban environments to test their capability in measuring microscale changes in urban air pollution; 3) by connecting LCS deployments with the implementation of local mobility policies to provide policy advice on resultant changes in air quality. In a first step, it was found that LCS can be consistently calibrated with good performance against reference instrumentation using seven general steps: 1) assessing raw data distribution, 2) cleaning data, 3) flagging data, 4) model selection and tuning, 5) model validation, 6) exporting final predictions, and 7) calculating associated uncertainty. By emphasizing the need for consistent reporting of details at each step, most crucially on model selection, validation, and performance, this work pushed forward with the effort towards standardization of calibration methodologies. In addition, with the open-source publication of code and data for the seven-step methodology, advances were made towards reforming the largely black-box nature of LCS calibrations. With a transparent and reliable calibration methodology established, LCS were then deployed in various street canyons between 2017 and 2020. Using two types of LCS, metal oxide (MOS) and electrochemical (EC), their performance in capturing expected patterns of urban NO2 and O3 pollution was evaluated. Results showed that calibrated concentrations from MOS and EC sensors matched general diurnal patterns in NO2 and O3 pollution measured using reference instruments. While MOS proved to be unreliable for discerning differences among measured locations within the urban environment, the concentrations measured with calibrated EC sensors matched expectations from modelling studies on NO2 and O3 pollution distribution in street canyons. As such, it was concluded that LCS are appropriate for measuring urban air quality, including for assisting urban-scale air pollution model development, and can reveal new insights into air pollution in urban environments. To achieve the last goal of this work, two measurement campaigns were conducted in connection with the implementation of three mobility policies in Berlin. The first involved the construction of a pop-up bike lane on Kottbusser Damm in response to the COVID-19 pandemic, the second surrounded the temporary implementation of a community space on B{\"o}ckhstrasse, and the last was focused on the closure of a portion of Friedrichstrasse to all motorized traffic. In all cases, measurements of NO2 were collected before and after the measure was implemented to assess changes in air quality resultant from these policies. Results from the Kottbusser Damm experiment showed that the bike-lane reduced NO2 concentrations that cyclists were exposed to by 22 ± 19\%. On Friedrichstrasse, the street closure reduced NO2 concentrations to the level of the urban background without worsening the air quality on side streets. These valuable results were communicated swiftly to partners in the city administration responsible for evaluating the policies' success and future, highlighting the ability of LCS to provide policy-relevant results. As a new technology, much is still to be learned about LCS and their value to academic research in the atmospheric sciences. Nevertheless, this work has advanced the state of the art in several ways. First, it contributed a novel open-source calibration methodology that can be used by a LCS end-users for various air pollutants. Second, it strengthened the evidence base on the reliability of LCS for measuring urban air quality, finding through novel deployments in street canyons that LCS can be used at high spatial resolution to understand microscale air pollution dynamics. Last, it is the first of its kind to connect LCS measurements directly with mobility policies to understand their influences on local air quality, resulting in policy-relevant findings valuable for decisionmakers. It serves as an example of the potential for LCS to expand our understanding of air pollution at various scales, as well as their ability to serve as valuable tools in transdisciplinary research.}, language = {en} } @phdthesis{Schaefer2024, author = {Sch{\"a}fer, Marj{\"a}nn Helena}, title = {Untersuchungen zur Evolution der 15-Lipoxygenase (ALOX15) bei S{\"a}ugetieren und funktionelle Charakterisierung von Knock-in-M{\"a}usen mit humanisierter Reaktionsspezifit{\"a}t der 15-Lipoxygenase-2 (Alox15b)}, doi = {10.25932/publishup-62034}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620340}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 280}, year = {2024}, abstract = {Arachidons{\"a}urelipoxygenasen (ALOX-Isoformen) sind Lipid-peroxidierenden Enzyme, die bei der Zelldifferenzierung und bei der Pathogenese verschiedener Erkrankungen bedeutsam sind. Im menschlichen Genom gibt es sechs funktionelle ALOX-Gene, die als Einzelkopiegene vorliegen. F{\"u}r jedes humane ALOX-Gen gibt es ein orthologes Mausgen. Obwohl sich die sechs humanen ALOX-Isoformen strukturell sehr {\"a}hnlich sind, unterscheiden sich ihre funktionellen Eigenschaften deutlich voneinander. In der vorliegenden Arbeit wurden vier unterschiedliche Fragestellungen zum Vorkommen, zur biologischen Rolle und zur Evolutionsabh{\"a}ngigkeit der enzymatischen Eigenschaften von S{\"a}ugetier-ALOX-Isoformen untersucht: 1) Spitzh{\"o}rnchen (Tupaiidae) sind evolution{\"a}r n{\"a}her mit dem Menschen verwandt als Nagetiere und wurden deshalb als Alternativmodelle f{\"u}r die Untersuchung menschlicher Erkrankungen vorgeschlagen. In dieser Arbeit wurde erstmals der Arachidons{\"a}urestoffwechsel von Spitzh{\"o}rnchen untersucht. Dabei wurde festgestellt, dass im Genom von Tupaia belangeri vier unterschiedliche ALOX15-Gene vorkommen und die Enzyme sich hinsichtlich ihrer katalytischen Eigenschaften {\"a}hneln. Diese genomische Vielfalt, die weder beim Menschen noch bei M{\"a}usen vorhanden ist, erschwert die funktionellen Untersuchungen zur biologischen Rolle des ALOX15-Weges. Damit scheint Tupaia belangeri kein geeigneteres Tiermodel f{\"u}r die Untersuchung des ALOX15-Weges des Menschen zu sein. 2) Entsprechend der Evolutionshypothese k{\"o}nnen S{\"a}ugetier-ALOX15-Orthologe in Arachidons{\"a}ure-12-lipoxygenierende- und Arachidons{\"a}ure-15-lipoxygenierende Enzyme eingeteilt werden. Dabei exprimieren S{\"a}ugetierspezies, die einen h{\"o}heren Evolutionsgrad als Gibbons aufweisen, Arachidons{\"a}ure-15-lipoxygenierende ALOX15-Orthologe, w{\"a}hrend evolution{\"a}r weniger weit entwickelte S{\"a}ugetiere Arachidons{\"a}ure-12 lipoxygenierende Enzyme besitzen. In dieser Arbeit wurden elf neue ALOX15-Orthologe als rekombinante Proteine exprimiert und funktionell charakterisiert. Die erhaltenen Ergebnisse f{\"u}gen sich widerspruchsfrei in die Evolutionshypothese ein und verbreitern deren experimentelle Basis. Die experimentellen Daten best{\"a}tigen auch das Triadenkonzept. 3) Da humane und murine ALOX15B-Orthologe unterschiedliche funktionelle Eigenschaften aufweisen, k{\"o}nnen Ergebnisse aus murinen Krankheitsmodellen zur biologischen Rolle der ALOX15B nicht direkt auf den Menschen {\"u}bertragen werden. Um die ALOX15B-Orthologen von Maus und Mensch funktionell einander anzugleichen, wurden im Rahmen der vorliegenden Arbeit Knock-in M{\"a}use durch die In vivo Mutagenese mittels CRISPR/Cas9-Technik hergestellt. Diese exprimieren eine humanisierte Mutante (Doppelmutation von Tyrosin603Asparagins{\"a}ure+Histidin604Valin) der murinen Alox15b. Diese M{\"a}use waren lebens- und fortpflanzungsf{\"a}hig, zeigten aber geschlechtsspezifische Unterschiede zu ausgekreuzten Wildtyp-Kontrolltieren im Rahmen ihre Individualentwicklung. 4) In vorhergehenden Untersuchungen zur Rolle der ALOX15B in Rahmen der Entz{\"u}ndungsreaktion wurde eine antiinflammatorische Wirkung des Enzyms postuliert. In der vorliegenden Arbeit wurde untersucht, ob eine Humanisierung der murinen Alox15b die Entz{\"u}ndungsreaktion in zwei verschiedenen murinen Entz{\"u}ndungsmodellen beeinflusst. Eine Humanisierung der murinen Alox15b f{\"u}hrte zu einer verst{\"a}rkten Ausbildung von Entz{\"u}ndungssymptomen im induzierten Dextran-Natrium-Sulfat-Kolitismodell. Im Gegensatz dazu bewirkte die Humanisierung der Alox15b eine Abschw{\"a}chung der Entz{\"u}ndungssymptome im Freund'schen Adjuvans Pfoten{\"o}demmodell. Diese Daten deuten darauf hin, dass sich die Rolle der ALOX15B in verschiedenen Entz{\"u}ndungsmodellen unterscheidet.}, language = {de} } @phdthesis{Trautmann2022, author = {Trautmann, Tina}, title = {Understanding global water storage variations using model-data integration}, doi = {10.25932/publishup-56595}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-565954}, school = {Universit{\"a}t Potsdam}, pages = {VIII, 141}, year = {2022}, abstract = {Climate change is one of the greatest challenges to humanity in this century, and most noticeable consequences are expected to be impacts on the water cycle - in particular the distribution and availability of water, which is fundamental for all life on Earth. In this context, it is essential to better understand where and when water is available and what processes influence variations in water storages. While estimates of the overall terrestrial water storage (TWS) variations are available from the GRACE satellites, these represent the vertically integrated signal over all water stored in ice, snow, soil moisture, groundwater and surface water bodies. Therefore, complementary observational data and hydrological models are still required to determine the partitioning of the measured signal among different water storages and to understand the underlying processes. However, the application of large-scale observational data is limited by their specific uncertainties and the incapacity to measure certain water fluxes and storages. Hydrological models, on the other hand, vary widely in their structure and process-representation, and rarely incorporate additional observational data to minimize uncertainties that arise from their simplified representation of the complex hydrologic cycle. In this context, this thesis aims to contribute to improving the understanding of global water storage variability by combining simple hydrological models with a variety of complementary Earth observation-based data. To this end, a model-data integration approach is developed, in which the parameters of a parsimonious hydrological model are calibrated against several observational constraints, inducing GRACE TWS, simultaneously, while taking into account each data's specific strengths and uncertainties. This approach is used to investigate 3 specific aspects that are relevant for modelling and understanding the composition of large-scale TWS variations. The first study focusses on Northern latitudes, where snow and cold-region processes define the hydrological cycle. While the study confirms previous findings that seasonal dynamics of TWS are dominated by the cyclic accumulation and melt of snow, it reveals that inter-annual TWS variations on the contrary, are determined by variations in liquid water storages. Additionally, it is found to be important to consider the impact of compensatory effects of spatially heterogeneous hydrological variables when aggregating the contribution of different storage components over large areas. Hence, the determinants of TWS variations are scale-dependent and underlying driving mechanism cannot be simply transferred between spatial and temporal scales. These findings are supported by the second study for the global land areas beyond the Northern latitudes as well. This second study further identifies the considerable impact of how vegetation is represented in hydrological models on the partitioning of TWS variations. Using spatio-temporal varying fields of Earth observation-based data to parameterize vegetation activity not only significantly improves model performance, but also reduces parameter equifinality and process uncertainties. Moreover, the representation of vegetation drastically changes the contribution of different water storages to overall TWS variability, emphasizing the key role of vegetation for water allocation, especially between sub-surface and delayed water storages. However, the study also identifies parameter equifinality regarding the decay of sub-surface and delayed water storages by either evapotranspiration or runoff, and thus emphasizes the need for further constraints hereof. The third study focuses on the role of river water storage, in particular whether it is necessary to include computationally expensive river routing for model calibration and validation against the integrated GRACE TWS. The results suggest that river routing is not required for model calibration in such a global model-data integration approach, due to the larger influence other observational constraints, and the determinability of certain model parameters and associated processes are identified as issues of greater relevance. In contrast to model calibration, considering river water storage derived from routing schemes can already significantly improve modelled TWS compared to GRACE observations, and thus should be considered for model evaluation against GRACE data. Beyond these specific findings that contribute to improved understanding and modelling of large-scale TWS variations, this thesis demonstrates the potential of combining simple modeling approaches with diverse Earth observational data to improve model simulations, overcome inconsistencies of different observational data sets, and identify areas that require further research. These findings encourage future efforts to take advantage of the increasing number of diverse global observational data.}, language = {en} } @phdthesis{Canil2021, author = {Canil, Laura}, title = {Tuning Interfacial Properties in Perovskite Solar Cells through Defined Molecular Assemblies}, doi = {10.25932/publishup-54633}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-546333}, school = {Universit{\"a}t Potsdam}, pages = {vii, 157}, year = {2021}, abstract = {In the frame of a world fighting a dramatic global warming caused by human-related activities, research towards the development of renewable energies plays a crucial role. Solar energy is one of the most important clean energy sources and its role in the satisfaction of the global energy demand is set to increase. In this context, a particular class of materials captured the attention of the scientific community for its attractive properties: halide perovskites. Devices with perovskite as light-absorber saw an impressive development within the last decade, reaching nowadays efficiencies comparable to mature photovoltaic technologies like silicon solar cells. Yet, there are still several roadblocks to overcome before a wide-spread commercialization of this kind of devices is enabled. One of the critical points lies at the interfaces: perovskite solar cells (PSCs) are made of several layers with different chemical and physical features. In order for the device to function properly, these properties have to be well-matched. This dissertation deals with some of the challenges related to interfaces in PSCs, with a focus on the interface between the perovskite material itself and the subsequent charge transport layer. In particular, molecular assemblies with specific properties are deposited on the perovskite surface to functionalize it. The functionalization results in energy level alignment adjustment, interfacial losses reduction, and stability improvement. First, a strategy to tune the perovskite's energy levels is introduced: self-assembled monolayers of dipolar molecules are used to functionalize the surface, obtaining simultaneously a shift in the vacuum level position and a saturation of the dangling bonds at the surface. A shift in the vacuum level corresponds to an equal change in work function, ionization energy, and electron affinity. The direction of the shift depends on the direction of the collective interfacial dipole. The magnitude of the shift can be tailored by controlling the deposition parameters, such as the concentration of the solution used for the deposition. The shift for different molecules is characterized by several non-invasive techniques, including in particular Kelvin probe. Overall, it is shown that it is possible to shift the perovskite energy levels in both directions by several hundreds of meV. Moreover, interesting insights on the molecules deposition dynamics are revealed. Secondly, the application of this strategy in perovskite solar cells is explored. Devices with different perovskite compositions ("triple cation perovskite" and MAPbBr3) are prepared. The two resulting model systems present different energetic offsets at the perovskite/hole-transport layer interface. Upon tailored perovskite surface functionalization, the devices show a stabilized open circuit voltage (Voc) enhancement of approximately 60 meV on average for devices with MAPbBr3, while the impact is limited on triple-cation solar cells. This suggests that the proposed energy level tuning method is valid, but its effectiveness depends on factors such as the significance of the energetic offset compared to the other losses in the devices. Finally, the above presented method is further developed by incorporating the ability to interact with the perovskite surface directly into a novel hole-transport material (HTM), named PFI. The HTM can anchor to the perovskite halide ions via halogen bonding (XB). Its behaviour is compared to that of another HTM (PF) with same chemical structure and properties, except for the ability of forming XB. The interaction of perovskite with PFI and PF is characterized through UV-Vis, atomic force microscopy and Kelvin probe measurements combined with simulations. Compared to PF, PFI exhibits enhanced resilience against solvent exposure and improved energy level alignment with the perovskite layer. As a consequence, devices comprising PFI show enhanced Voc and operational stability during maximum-power-point tracking, in addition to hysteresis reduction. XB promotes the formation of a high-quality interface by anchoring to the halide ions and forming a stable and ordered interfacial layer, showing to be a particularly interesting candidate for the development of tailored charge transport materials in PSCs. Overall, the results exposed in this dissertation introduce and discuss a versatile tool to functionalize the perovskite surface and tune its energy levels. The application of this method in devices is explored and insights on its challenges and advantages are given. Within this frame, the results shed light on XB as ideal interaction for enhancing stability and efficiency in perovskite-based devices.}, language = {en} } @phdthesis{Behm2019, author = {Behm, Laura Vera Johanna}, title = {Thermoresponsive Zellkultursubstrate f{\"u}r zeitlich-r{\"a}umlich gesteuertes Auswachsen neuronaler Zellen}, doi = {10.25932/publishup-43619}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436196}, school = {Universit{\"a}t Potsdam}, pages = {VII, 105}, year = {2019}, abstract = {Ein wichtiges Ziel der Neurowissenschaften ist das Verst{\"a}ndnis der komplexen und zugleich faszinierenden, hochgeordneten Vernetzung der Neurone im Gehirn, welche neuronalen Prozessen, wie zum Beispiel dem Wahrnehmen oder Lernen wie auch Neuropathologien zu Grunde liegt. F{\"u}r verbesserte neuronale Zellkulturmodelle zur detaillierten Untersuchung dieser Prozesse ist daher die Rekonstruktion von geordneten neuronalen Verbindungen dringend erforderlich. Mit Oberfl{\"a}chenstrukturen aus zellattraktiven und zellabweisenden Beschichtungen k{\"o}nnen neuronale Zellen und ihre Neuriten in vitro strukturiert werden. Zur Kontrolle der neuronalen Verbindungsrichtung muss das Auswachsen der Axone zu benachbarten Zellen dynamisch gesteuert werden, zum Beispiel {\"u}ber eine ver{\"a}nderliche Zug{\"a}nglichkeit der Oberfl{\"a}che. In dieser Arbeit wurde untersucht, ob mit thermoresponsiven Polymeren (TRP) beschichtete Zellkultursubstrate f{\"u}r eine dynamische Kontrolle des Auswachsens neuronaler Zellen geeignet sind. TRP k{\"o}nnen {\"u}ber die Temperatur von einem zellabweisenden in einen zellattraktiven Zustand geschaltet werden, womit die Zug{\"a}nglichkeit der Oberfl{\"a}che f{\"u}r Zellen dynamisch gesteuert werden kann. Die TRP-Beschichtung wurde mikrostrukturiert, um einzelne oder wenige neuronale Zellen zun{\"a}chst auf der Oberfl{\"a}che anzuordnen und das Auswachsen der Zellen und Neuriten {\"u}ber definierte TRP-Bereiche in Abh{\"a}ngigkeit der Temperatur zeitlich und r{\"a}umlich zu kontrollieren. Das Protokoll wurde mit der neuronalen Zelllinie SH-SY5Y etabliert und auf humane induzierte Neurone {\"u}bertragen. Die Anordnung der Zellen konnte bei Kultivierung im zellabweisenden Zustand des TRPs f{\"u}r bis zu 7 Tage aufrecht erhalten werden. Durch Schalten des TRPs in den zellattraktiven Zustand konnte das Auswachsen der Neuriten und Zellen zeitlich und r{\"a}umlich induziert werden. Immunozytochemische F{\"a}rbungen und Patch-Clamp-Ableitungen der Neurone demonstrierten die einfache Anwendbarkeit und Zellkompatibilit{\"a}t der TRP-Substrate. Eine pr{\"a}zisere r{\"a}umliche Kontrolle des Auswachsens der Zellen sollte durch lokales Schalten der TRP-Beschichtung erreicht werden. Daf{\"u}r wurden Mikroheizchips mit Mikroelektroden zur lokalen Jouleschen Erw{\"a}rmung der Substratoberfl{\"a}che entwickelt. Zur Evaluierung der generierten Temperaturprofile wurde eine Temperaturmessmethode entwickelt und die erhobenen Messwerte mit numerisch simulierten Werten abgeglichen. Die Temperaturmessmethode basiert auf einfach zu applizierenden Sol-Gel-Schichten, die den temperatursensitiven Fluoreszenzfarbstoff Rhodamin B enthalten. Sie erm{\"o}glicht oberfl{\"a}chennahe Temperaturmessungen in trockener und w{\"a}ssriger Umgebung mit hoher Orts- und Temperaturaufl{\"o}sung. Numerische Simulationen der Temperaturprofile korrelierten gut mit den experimentellen Daten. Auf dieser Basis konnten Geometrie und Material der Mikroelektroden hinsichtlich einer lokal stark begrenzten Temperierung optimiert werden. Ferner wurden f{\"u}r die Kultvierung der Zellen auf den Mikroheizchips eine Zellkulturkammer und Kontaktboard f{\"u}r die elektrische Kontaktierung der Mikroelektroden geschaffen. Die vorgestellten Ergebnisse demonstrieren erstmalig das enorme Potential thermoresponsiver Zellkultursubstrate f{\"u}r die zeitlich und r{\"a}umlich gesteuerte Formation geordneter neuronaler Verbindungen in vitro. Zuk{\"u}nftig k{\"o}nnte dies detaillierte Studien zur neuronalen Informationsverarbeitung oder zu Neuropathologien an relevanten, humanen Zellmodellen erm{\"o}glichen.}, language = {de} } @phdthesis{RodriguezPiceda2022, author = {Rodriguez Piceda, Constanza}, title = {Thermomechanical state of the southern Central Andes}, doi = {10.25932/publishup-54927}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549275}, school = {Universit{\"a}t Potsdam}, pages = {xx, 228}, year = {2022}, abstract = {The Andes are a ~7000 km long N-S trending mountain range developed along the South American western continental margin. Driven by the subduction of the oceanic Nazca plate beneath the continental South American plate, the formation of the northern and central parts of the orogen is a type case for a non-collisional orogeny. In the southern Central Andes (SCA, 29°S-39°S), the oceanic plate changes the subduction angle between 33°S and 35°S from almost horizontal (< 5° dip) in the north to a steeper angle (~30° dip) in the south. This sector of the Andes also displays remarkable along- and across- strike variations of the tectonic deformation patterns. These include a systematic decrease of topographic elevation, of crustal shortening and foreland and orogenic width, as well as an alternation of the foreland deformation style between thick-skinned and thin-skinned recorded along- and across the strike of the subduction zone. Moreover, the SCA are a very seismically active region. The continental plate is characterized by a relatively shallow seismicity (< 30 km depth) which is mainly focussed at the transition from the orogen to the lowland areas of the foreland and the forearc; in contrast, deeper seismicity occurs below the interiors of the northern foreland. Additionally, frequent seismicity is also recorded in the shallow parts of the oceanic plate and in a sector of the flat slab segment between 31°S and 33°S. The observed spatial heterogeneity in tectonic and seismic deformation in the SCA has been attributed to multiple causes, including variations in sediment thickness, the presence of inherited structures and changes in the subduction angle of the oceanic slab. However, there is no study that inquired the relationship between the long-term rheological configuration of the SCA and the spatial deformation patterns. Moreover, the effects of the density and thickness configuration of the continental plate and of variations in the slab dip angle in the rheological state of the lithosphere have been not thoroughly investigated yet. Since rheology depends on composition, pressure and temperature, a detailed characterization of the compositional, structural and thermal fields of the lithosphere is needed. Therefore, by using multiple geophysical approaches and data sources, I constructed the following 3D models of the SCA lithosphere: (i) a seismically-constrained structural and density model that was tested against the gravity field; (ii) a thermal model integrating the conversion of mantle shear-wave velocities to temperature with steady-state conductive calculations in the uppermost lithosphere (< 50 km depth), validated by temperature and heat-flow measurements; and (iii) a rheological model of the long-term lithospheric strength using as input the previously-generated models. The results of this dissertation indicate that the present-day thermal and rheological fields of the SCA are controlled by different mechanisms at different depths. At shallow depths (< 50 km), the thermomechanical field is modulated by the heterogeneous composition of the continental lithosphere. The overprint of the oceanic slab is detectable where the oceanic plate is shallow (< 85 km depth) and the radiogenic crust is thin, resulting in overall lower temperatures and higher strength compared to regions where the slab is steep and the radiogenic crust is thick. At depths > 50 km, largest temperatures variations occur where the descending slab is detected, which implies that the deep thermal field is mainly affected by the slab dip geometry. The outcomes of this thesis suggests that long-term thermomechanical state of the lithosphere influences the spatial distribution of seismic deformation. Most of the seismicity within the continental plate occurs above the modelled transition from brittle to ductile conditions. Additionally, there is a spatial correlation between the location of these events and the transition from the mechanically strong domains of the forearc and foreland to the weak domain of the orogen. In contrast, seismicity within the oceanic plate is also detected where long-term ductile conditions are expected. I therefore analysed the possible influence of additional mechanisms triggering these earthquakes, including the compaction of sediments in the subduction interface and dehydration reactions in the slab. To that aim, I carried out a qualitative analysis of the state of hydration in the mantle using the ratio between compressional- and shear-wave velocity (vp/vs ratio) from a previous seismic tomography. The results from this analysis indicate that the majority of the seismicity spatially correlates with hydrated areas of the slab and overlying continental mantle, with the exception of the cluster within the flat slab segment. In this region, earthquakes are likely triggered by flexural processes where the slab changes from a flat to a steep subduction angle. First-order variations in the observed tectonic patterns also seem to be influenced by the thermomechanical configuration of the lithosphere. The mechanically strong domains of the forearc and foreland, due to their resistance to deformation, display smaller amounts of shortening than the relatively weak orogenic domain. In addition, the structural and thermomechanical characteristics modelled in this dissertation confirm previous analyses from geodynamic models pointing to the control of the observed heterogeneities in the orogen and foreland deformation style. These characteristics include the lithospheric and crustal thickness, the presence of weak sediments and the variations in gravitational potential energy. Specific conditions occur in the cold and strong northern foreland, which is characterized by active seismicity and thick-skinned structures, although the modelled crustal strength exceeds the typical values of externally-applied tectonic stresses. The additional mechanisms that could explain the strain localization in a region that should resist deformation are: (i) increased tectonic forces coming from the steepening of the slab and (ii) enhanced weakening along inherited structures from pre-Andean deformation events. Finally, the thermomechanical conditions of this sector of the foreland could be a key factor influencing the preservation of the flat subduction angle at these latitudes of the SCA.}, language = {en} } @phdthesis{Paganini2018, author = {Paganini, Claudio Francesco}, title = {The role of trapping in black hole spacetimes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-414686}, school = {Universit{\"a}t Potsdam}, pages = {v, 138}, year = {2018}, abstract = {In the here presented work we discuss a series of results that are all in one way or another connected to the phenomenon of trapping in black hole spacetimes. First we present a comprehensive review of the Kerr-Newman-Taub-NUT-de-Sitter family of black hole spacetimes and their most important properties. From there we go into a detailed analysis of the bahaviour of null geodesics in the exterior region of a sub-extremal Kerr spacetime. We show that most well known fundamental properties of null geodesics can be represented in one plot. In particular, one can see immediately that the ergoregion and trapping are separated in phase space. We then consider the sets of future/past trapped null geodesics in the exterior region of a sub-extremal Kerr-Newman-Taub-NUT spacetime. We show that from the point of view of any timelike observer outside of such a black hole, trapping can be understood as two smooth sets of spacelike directions on the celestial sphere of the observer. Therefore the topological structure of the trapped set on the celestial sphere of any observer is identical to that in Schwarzschild. We discuss how this is relevant to the black hole stability problem. In a further development of these observations we introduce the notion of what it means for the shadow of two observers to be degenerate. We show that, away from the axis of symmetry, no continuous degeneration exists between the shadows of observers at any point in the exterior region of any Kerr-Newman black hole spacetime of unit mass. Therefore, except possibly for discrete changes, an observer can, by measuring the black holes shadow, determine the angular momentum and the charge of the black hole under observation, as well as the observer's radial position and angle of elevation above the equatorial plane. Furthermore, his/her relative velocity compared to a standard observer can also be measured. On the other hand, the black hole shadow does not allow for a full parameter resolution in the case of a Kerr-Newman-Taub-NUT black hole, as a continuous degeneration relating specific angular momentum, electric charge, NUT charge and elevation angle exists in this case. We then use the celestial sphere to show that trapping is a generic feature of any black hole spacetime. In the last chapter we then prove a generalization of the mode stability result of Whiting (1989) for the Teukolsky equation for the case of real frequencies. The main result of the last chapter states that a separated solution of the Teukolsky equation governing massless test fields on the Kerr spacetime, which is purely outgoing at infinity, and purely ingoing at the horizon, must vanish. This has the consequence, that for real frequencies, there are linearly independent fundamental solutions of the radial Teukolsky equation which are purely ingoing at the horizon, and purely outgoing at infinity, respectively. This fact yields a representation formula for solutions of the inhomogenous Teukolsky equation, and was recently used by Shlapentokh-Rothman (2015) for the scalar wave equation.}, language = {en} } @phdthesis{Muench2021, author = {M{\"u}nch, Steffen}, title = {The relevance of the aeolian transport path for the spread of antibiotic-resistant bacteria on arable fields}, doi = {10.25932/publishup-53608}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-536089}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 140}, year = {2021}, abstract = {The spread of antibiotic-resistant bacteria poses a globally increasing threat to public health care. The excessive use of antibiotics in animal husbandry can develop resistances in the stables. Transmission through direct contact with animals and contamination of food has already been proven. The excrements of the animals combined with a binding material enable a further potential path of spread into the environment, if they are used as organic manure in agricultural landscapes. As most of the airborne bacteria are attached to particulate matter, the focus of the work will be the atmospheric dispersal via the dust fraction. Field measurements on arable lands in Brandenburg, Germany and wind erosion studies in a wind tunnel were conducted to investigate the risk of a potential atmospheric dust-associated spread of antibiotic-resistant bacteria from poultry manure fertilized agricultural soils. The focus was to (i) characterize the conditions for aerosolization and (ii) qualify and quantify dust emissions during agricultural operations and wind erosion. PM10 (PM, particulate matter with an aerodynamic diameter smaller than 10 µm) emission factors and bacterial fluxes for poultry manure application and incorporation have not been previously reported before. The contribution to dust emissions depends on the water content of the manure, which is affected by the manure pretreatment (fresh, composted, stored, dried), as well as by the intensity of manure spreading from the manure spreader. During poultry manure application, PM10 emission ranged between 0.05 kg ha-1 and 8.37 kg ha-1. For comparison, the subsequent land preparation contributes to 0.35 - 1.15 kg ha-1 of PM10 emissions. Manure particles were still part of dust emissions but they were accounted to be less than 1\% of total PM10 emissions due to the dilution of poultry manure in the soil after manure incorporation. Bacterial emissions of fecal origin were more relevant during manure application than during the subsequent manure incorporation, although PM10 emissions of manure incorporation were larger than PM10 emissions of manure application for the non-dried manure variants. Wind erosion leads to preferred detachment of manure particles from sandy soils, when poultry manure has been recently incorporated. Sorting effects were determined between the low-density organic particles of manure origin and the soil particles of mineral origin close above the threshold of 7 m s-1. In dependence to the wind speed, potential erosion rates between 101 and 854 kg ha-1 were identified, if 6 t ha-1 of poultry manure were applied. Microbial investigation showed that manure bacteria got detached more easily from the soil surface during wind erosion, due to their attachment on manure particles. Although antibiotic-resistant bacteria (ESBL-producing E. coli) were still found in the poultry barns, no further contamination could be detected with them in the manure, fertilized soils or in the dust generated by manure application, land preparation or wind erosion. Parallel studies of this project showed that storage of poultry manure for a few days (36 - 72 h) is sufficient to inactivate ESBL-producing E. coli. Further antibiotic-resistant bacteria, i.e. MRSA and VRE, were only found sporadically in the stables and not at all in the dust. Therefore, based on the results of this work, the risk of a potential infection by dust-associated antibiotic-resistant bacteria can be considered as low.}, language = {en} } @phdthesis{Kolk2019, author = {Kolk, Jens}, title = {The long-term legacy of historical land cover changes}, doi = {10.25932/publishup-43939}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439398}, school = {Universit{\"a}t Potsdam}, pages = {196}, year = {2019}, abstract = {Over the last years there is an increasing awareness that historical land cover changes and associated land use legacies may be important drivers for present-day species richness and biodiversity due to time-delayed extinctions or colonizations in response to historical environmental changes. Historically altered habitat patches may therefore exhibit an extinction debt or colonization credit and can be expected to lose or gain species in the future. However, extinction debts and colonization credits are difficult to detect and their actual magnitudes or payments have rarely been quantified because species richness patterns and dynamics are also shaped by recent environmental conditions and recent environmental changes. In this thesis we aimed to determine patterns of herb-layer species richness and recent species richness dynamics of forest herb layer plants and link those patterns and dynamics to historical land cover changes and associated land use legacies. The study was conducted in the Prignitz, NE-Germany, where the forest distribution remained stable for the last ca. 100 years but where a) the deciduous forest area had declined by more than 90 per cent (leaving only remnants of "ancient forests"), b) small new forests had been established on former agricultural land ("post-agricultural forests"). Here, we analyzed the relative importance of land use history and associated historical land cover changes for herb layer species richness compared to recent environmental factors and determined magnitudes of extinction debt and colonization credit and their payment in ancient and post-agricultural forests, respectively. We showed that present-day species richness patterns were still shaped by historical land cover changes that ranged back to more than a century. Although recent environmental conditions were largely comparable we found significantly more forest specialists, species with short-distance dispersal capabilities and clonals in ancient forests than in post-agricultural forests. Those species richness differences were largely contingent to a colonization credit in post-agricultural forests that ranged up to 9 species (average 4.7), while the extinction debt in ancient forests had almost completely been paid. Environmental legacies from historical agricultural land use played a minor role for species richness differences. Instead, patch connectivity was most important. Species richness in ancient forests was still dependent on historical connectivity, indicating a last glimpse of an extinction debt, and the colonization credit was highest in isolated post-agricultural forests. In post-agricultural forests that were better connected or directly adjacent to ancient forest patches the colonization credit was way smaller and we were able to verify a gradual payment of the colonization credit from 2.7 species to 1.5 species over the last six decades.}, language = {en} } @phdthesis{Khosravi2023, author = {Khosravi, Sara}, title = {The effect of new turbulence parameterizations for the stable surface layer on simulations of the Arctic climate}, doi = {10.25932/publishup-64352}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-643520}, school = {Universit{\"a}t Potsdam}, pages = {XIV, 119}, year = {2023}, abstract = {Arctic climate change is marked by intensified warming compared to global trends and a significant reduction in Arctic sea ice which can intricately influence mid-latitude atmospheric circulation through tropo- and stratospheric pathways. Achieving accurate simulations of current and future climate demands a realistic representation of Arctic climate processes in numerical climate models, which remains challenging. Model deficiencies in replicating observed Arctic climate processes often arise due to inadequacies in representing turbulent boundary layer interactions that determine the interactions between the atmosphere, sea ice, and ocean. Many current climate models rely on parameterizations developed for mid-latitude conditions to handle Arctic turbulent boundary layer processes. This thesis focuses on modified representation of the Arctic atmospheric processes and understanding their resulting impact on large-scale mid-latitude atmospheric circulation within climate models. The improved turbulence parameterizations, recently developed based on Arctic measurements, were implemented in the global atmospheric circulation model ECHAM6. This involved modifying the stability functions over sea ice and ocean for stable stratification and changing the roughness length over sea ice for all stratification conditions. Comprehensive analyses are conducted to assess the impacts of these modifications on ECHAM6's simulations of the Arctic boundary layer, overall atmospheric circulation, and the dynamical pathways between the Arctic and mid-latitudes. Through a step-wise implementation of the mentioned parameterizations into ECHAM6, a series of sensitivity experiments revealed that the combined impacts of the reduced roughness length and the modified stability functions are non-linear. Nevertheless, it is evident that both modifications consistently lead to a general decrease in the heat transfer coefficient, being in close agreement with the observations. Additionally, compared to the reference observations, the ECHAM6 model falls short in accurately representing unstable and strongly stable conditions. The less frequent occurrence of strong stability restricts the influence of the modified stability functions by reducing the affected sample size. However, when focusing solely on the specific instances of a strongly stable atmosphere, the sensible heat flux approaches near-zero values, which is in line with the observations. Models employing commonly used surface turbulence parameterizations were shown to have difficulties replicating the near-zero sensible heat flux in strongly stable stratification. I also found that these limited changes in surface layer turbulence parameterizations have a statistically significant impact on the temperature and wind patterns across multiple pressure levels, including the stratosphere, in both the Arctic and mid-latitudes. These significant signals vary in strength, extent, and direction depending on the specific month or year, indicating a strong reliance on the background state. Furthermore, this research investigates how the modified surface turbulence parameterizations may influence the response of both stratospheric and tropospheric circulation to Arctic sea ice loss. The most suitable parameterizations for accurately representing Arctic boundary layer turbulence were identified from the sensitivity experiments. Subsequently, the model's response to sea ice loss is evaluated through extended ECHAM6 simulations with different prescribed sea ice conditions. The simulation with adjusted surface turbulence parameterizations better reproduced the observed Arctic tropospheric warming in vertical extent, demonstrating improved alignment with the reanalysis data. Additionally, unlike the control experiments, this simulation successfully reproduced specific circulation patterns linked to the stratospheric pathway for Arctic-mid-latitude linkages. Specifically, an increased occurrence of the Scandinavian-Ural blocking regime (negative phase of the North Atlantic Oscillation) in early (late) winter is observed. Overall, it can be inferred that improving turbulence parameterizations at the surface layer can improve the ECHAM6's response to sea ice loss.}, language = {en} } @phdthesis{Brenner2022, author = {Brenner, Andri Caspar}, title = {Sustainable urban growth}, doi = {10.25932/publishup-55522}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-555223}, school = {Universit{\"a}t Potsdam}, pages = {231}, year = {2022}, abstract = {This dissertation explores the determinants for sustainable and socially optimalgrowth in a city. Two general equilibrium models establish the base for this evaluation, each adding its puzzle piece to the urban sustainability discourse and examining the role of non-market-based and market-based policies for balanced growth and welfare improvements in different theory settings. Sustainable urban growth either calls for policy actions or a green energy transition. Further, R\&D market failures can pose severe challenges to the sustainability of urban growth and the social optimality of decentralized allocation decisions. Still, a careful (holistic) combination of policy instruments can achieve sustainable growth and even be first best.}, language = {en} } @phdthesis{Folikumah2022, author = {Folikumah, Makafui Yao}, title = {Stimuli-promoted in situ formation of hydrogels with thiol/thioester containing peptide precursors}, doi = {10.25932/publishup-56971}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-569713}, school = {Universit{\"a}t Potsdam}, pages = {159}, year = {2022}, abstract = {Hydrogels are potential synthetic ECM-like substitutes since they provide functional and structural similarities compared to soft tissues. They can be prepared by crosslinking of macromolecules or by polymerizing suitable precursors. The crosslinks are not necessarily covalent bonds, but could also be formed by physical interactions such as π-π interactions, hydrophobic interactions, or H-bonding. On demand in situ forming hydrogels have garnered increased interest especially for biomedical applications over preformed gels due to the relative ease of in vivo delivery and filling of cavities. The thiol-Michael addition reaction provides a straightforward and robust strategy for in situ gel formation with its fast reaction kinetics and ability to proceed under physiological conditions. The incorporation of a trigger function into a crosslinking system becomes even more interesting since gelling can be controlled with stimulus of choice. The use of small molar mass crosslinker precursors with active groups orthogonal to thiol-Michael reaction type electrophile provides the opportunity to implement an on-demand in situ crosslinking without compromising the fast reaction kinetics. It was postulated that short peptide sequences due to the broad range structural-function relations available with the different constituent amino acids, can be exploited for the realisation of stimuli-promoted in situ covalent crosslinking and gelation applications. The advantages of this system over conventional polymer-polymer hydrogel systems are the ability tune and predict material property at the molecular level. The main aim of this work was to develop a simplified and biologically-friendly stimuli-promoted in situ crosslinking and hydrogelation system using peptide mimetics as latent crosslinkers. The approach aims at using a single thiodepsipeptide sequence to achieve separate pH- and enzyme-promoted gelation systems with little modification to the thiodepsipeptide sequence. The realization of this aim required the completion of three milestones. In the first place, after deciding on the thiol-Michael reaction as an effective in situ crosslinking strategy, a thiodepsipeptide, Ac-Pro-Leu-Gly-SLeu-Leu-Gly-NEtSH (TDP) with expected propensity towards pH-dependent thiol-thioester exchange (TTE) activation, was proposed as a suitable crosslinker precursor for pH-promoted gelation system. Prior to the synthesis of the proposed peptide-mimetic, knowledge of the thiol-Michael reactivity of the would-be activated thiol moiety SH-Leu, which is internally embedded in the thiodepsipeptide was required. In line with pKa requirements for a successful TTE, the reactivity of a more acidic thiol, SH-Phe was also investigated to aid the selection of the best thiol to be incorporated in the thioester bearing peptide based crosslinker precursor. Using 'pseudo' 2D-NMR investigations, it was found that only reactions involving SH-Leu yielded the expected thiol-Michael product, an observation that was attributed to the steric hindrance of the bulkier nature of SH-Phe. The fast reaction rates and complete acrylate/maleimide conversion obtained with SH-Leu at pH 7.2 and higher aided the direct elimination of SH-Phe as a potential thiol for the synthesis of the peptide mimetic. Based on the initial studies, for the pH-promoted gelation system, the proposed Ac-Pro-Leu-Gly-SLeu-Leu-Gly-NEtSH was kept unmodified. The subtle difference in pKa values between SH-Leu (thioester thiol) and the terminal cysteamine thiol from theoretical conditions should be enough to effect a 'pseudo' intramolecular TTE. In polar protic solvents and under basic aqueous conditions, TDP successfully undergoes a 'pseudo' intramolecular TTE reaction to yield an α,ω-dithiol tripeptide, HSLeu-Leu-Gly-NEtSH. The pH dependence of thiolate ion generation by the cysteamine thiol aided the incorporation of the needed stimulus (pH) for the overall success of TTE (activation step) - thiol-Michael addition (crosslinking) strategy. Secondly, with potential biomedical applications in focus, the susceptibility of TDP, like other thioesters, to intermolecular TTE reaction was probed with a group of thiols of varying thiol pKa values, since biological milieu characteristically contain peptide/protein thiols. L-cysteine, which is a biologically relevant thiol, and a small molecular weight thiol, methylthioglycolate both with relatively similar thiol pKa, values, led to an increase concentration of the dithiol crosslinker when reacted with TDP. In the presence of acidic thiols (p-NTP and 4MBA), a decrease in the dithiol concentration was observed, an observation that can be attributed to the inability of the TTE tetrahedral intermediate to dissociate into exchange products and is in line with pKa requirements for successful TTE reaction. These results additionally makes TDP more attractive and the potentially the first crosslinker precursor for applications in biologically relevant media. Finally, the ability of TDP to promote pH-sensitive in situ gel formation was probed with maleimide functionalized 4-arm polyethylene glycol polymers in tris-buffered media of varying pHs. When a 1:1 thiol: maleimide molar ratio was used, TDP-PEG4MAL hydrogels formed within 3, 12 and 24 hours at pH values of 8.5, 8.0 and 7.5 respectively. However, gelation times of 3, 5 and 30 mins were observed for the same pH trend when the thiol: maleimide molar was increased to 2:1. A direct correlation of thiol content with G' of the gels at each pH could also be drawn by comparing gels with thiol: maleimide ratios of 1:1 to those with 2:1 thiol: maleimide mole ratios. This is supported by the fact that the storage modulus (G') is linearly dependent on the crosslinking density of the polymer. The values of initial G′ for all gels ranged between (200 - 5000 Pa), which falls in the range of elasticities of certain tissue microenvironments for example brain tissue 200 - 1000 Pa and adipose tissue (2500 - 3500 Pa). Knowledge so far gained from the study on the ability to design and tune the exchange reaction of thioester containing peptide mimetic will give those working in the field further insight into the development of new sequences tailored towards specific applications. TTE substrate design using peptide mimetic as presented in this work has revealed interesting new insights considering the state-of-the-art. Using the results obtained as reference, the strategy provides a possibility to extend the concept to the controlled delivery of active molecules needed for other robust and high yielding crosslinking reactions for biomedical applications. Application for this sequentially coupled functional system could be seen e.g. in the treatment of inflamed tissues associated with urinary tract like bladder infections for which pH levels above 7 were reported. By the inclusion of cell adhesion peptide motifs, the hydrogel network formed at this pH could act as a new support layer for the healing of damage epithelium as shown in interfacial gel formation experiments using TDP and PEG4MAL droplets. The versatility of the thiodepsipeptide sequence, Ac-Pro-Leu-Gly-SLeu-Leu-Gly-(TDPo) was extended for the design and synthesis of a MMP-sensitive 4-arm PEG-TDPo conjugate. The purported cleavage of TDPo at the Gly-SLeu bond yields active thiol units for subsequent reaction of orthogonal Michael acceptor moieties. One of the advantages of stimuli-promoted in situ crosslinking systems using short peptides should be the ease of design of required peptide molecules due to the predictability of peptide functions their sequence structure. Consequently the functionalisation of a 4-arm PEG core with the collagenase active TDPo sequence yielded an MMP-sensitive 4-arm thiodepsipeptide-PEG conjugate (PEG4TDPo) substrate. Cleavage studies using thiol flourometric assay in the presence of MMPs -2 and -9 confirmed the susceptibility of PEG4TDPo towards these enzymes. The resulting time-dependent increase in fluorescence intensity in the presence of thiol assay signifies the successful cleavage of TDPo at the Gly-SLeu bond as expected. It was observed that the cleavage studies with thiol flourometric assay introduces a sigmoid non-Michaelis-Menten type kinetic profile, hence making it difficult to accurately determine the enzyme cycling parameters, kcat and KM . Gelation studies with PEG4MAL at 10 \% wt. concentrations revealed faster gelation with MMP-2 than MMP-9 with 28 and 40 min gelation times respectively. Possible contributions by hydrolytic cleavage of PEG4TDPo has resulted in the gelation of PEG4MAL blank samples but only after 60 minutes of reaction. From theoretical considerations, the simultaneous gelation reaction would be expected to more negatively impact the enzymatic than hydrolytic cleavage. The exact contributions from hydrolytic cleavage of PEG4TDPo would however require additional studies. In summary this new and simplified in situ crosslinking system using peptide-based crosslinker precursors with tuneable properties exhibited in situ crosslinking gelation kinetics on similar levels with already active dithiols reported. The advantageous on-demand functionality associated with its pH-sensitivity and physiological compatibility makes it a strong candidate worth further research as biomedical applications in general and on-demand material synthesis is concerned. Results from MMP-promoted gelation system unveils a simple but unexplored approach for in situ synthesis of covalently crosslinked soft materials, that could lead to the development of an alternative pathway in addressing cancer metastasis by making use of MMP overexpression as a trigger. This goal has so far not being reach with MMP inhibitors despite the extensive work this regard.}, language = {en} } @phdthesis{IlićPetković2023, author = {Ilić Petković, Nikoleta}, title = {Stars under influence: evidence of tidal interactions between stars and substellar companions}, doi = {10.25932/publishup-61597}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-615972}, school = {Universit{\"a}t Potsdam}, pages = {xi, 137}, year = {2023}, abstract = {Tidal interactions occur between gravitationally bound astrophysical bodies. If their spatial separation is sufficiently small, the bodies can induce tides on each other, leading to angular momentum transfer and altering of evolutionary path the bodies would have followed if they were single objects. The tidal processes are well established in the Solar planet-moon systems and close stellar binary systems. However, how do stars behave if they are orbited by a substellar companion (e.g. a planet or a brown dwarf) on a tight orbit? Typically, a substellar companion inside the corotation radius of a star will migrate toward the star as it loses orbital angular momentum. On the other hand, the star will gain angular momentum which has the potential to increase its rotation rate. The effect should be more pronounced if the substellar companion is more massive. As the stellar rotation rate and the magnetic activity level are coupled, the star should appear more magnetically active under the tidal influence of the orbiting substellar companion. However, the difficulty in proving that a star has a higher magnetic activity level due to tidal interactions lies in the fact that (I) substellar companions around active stars are easier to detect if they are more massive, leading to a bias toward massive companions around active stars and mimicking the tidal interaction effect, and that (II) the age of a main-sequence star cannot be easily determined, leaving the possibility that a star is more active due to its young age. In our work, we overcome these issues by employing wide stellar binary systems where one star hosts a substellar companion, and where the other star provides the magnetic activity baseline for the host star, assuming they have coevolved, and thereby provides the host's activity level if tidal interactions have no effect on it. Firstly, we find that extrasolar planets can noticeably increase the host star's X-ray luminosity and that the effect is more pronounced if the exoplanet is at least Jupiter-like in mass and close to the star. Further, we find that a brown dwarf will have an even stronger effect, as expected, and that the X-ray surface flux difference between the host star and the wide stellar companion is a significant outlier when compared to a large sample of similar wide binary systems without any known substellar companions. This result proves that substellar hosting wide binary systems can be good tools to reveal the tidal effect on host stars, and also show that the typical stellar age indicators as activity or rotation cannot be used for these stars. Finally, knowing that the activity difference is a good tracer of the substellar companion's tidal impact, we develop an analytical method to calculate the modified tidal quality factor Q' of individual host stars, which defines the tidal dissipation efficiency in the convective envelope of a given main-sequence star.}, language = {en} } @phdthesis{Braun2023, author = {Braun, Tobias}, title = {Recurrences in past climates}, doi = {10.25932/publishup-58690}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-586900}, school = {Universit{\"a}t Potsdam}, pages = {xxviii, 251}, year = {2023}, abstract = {Our ability to predict the state of a system relies on its tendency to recur to states it has visited before. Recurrence also pervades common intuitions about the systems we are most familiar with: daily routines, social rituals and the return of the seasons are just a few relatable examples. To this end, recurrence plots (RP) provide a systematic framework to quantify the recurrence of states. Despite their conceptual simplicity, they are a versatile tool in the study of observational data. The global climate is a complex system for which an understanding based on observational data is not only of academical relevance, but vital for the predurance of human societies within the planetary boundaries. Contextualizing current global climate change, however, requires observational data far beyond the instrumental period. The palaeoclimate record offers a valuable archive of proxy data but demands methodological approaches that adequately address its complexities. In this regard, the following dissertation aims at devising novel and further developing existing methods in the framework of recurrence analysis (RA). The proposed research questions focus on using RA to capture scale-dependent properties in nonlinear time series and tailoring recurrence quantification analysis (RQA) to characterize seasonal variability in palaeoclimate records ('Palaeoseasonality'). In the first part of this thesis, we focus on the methodological development of novel approaches in RA. The predictability of nonlinear (palaeo)climate time series is limited by abrupt transitions between regimes that exhibit entirely different dynamical complexity (e.g. crossing of 'tipping points'). These possibly depend on characteristic time scales. RPs are well-established for detecting transitions and capture scale-dependencies, yet few approaches have combined both aspects. We apply existing concepts from the study of self-similar textures to RPs to detect abrupt transitions, considering the most relevant time scales. This combination of methods further results in the definition of a novel recurrence based nonlinear dependence measure. Quantifying lagged interactions between multiple variables is a common problem, especially in the characterization of high-dimensional complex systems. The proposed 'recurrence flow' measure of nonlinear dependence offers an elegant way to characterize such couplings. For spatially extended complex systems, the coupled dynamics of local variables result in the emergence of spatial patterns. These patterns tend to recur in time. Based on this observation, we propose a novel method that entails dynamically distinct regimes of atmospheric circulation based on their recurrent spatial patterns. Bridging the two parts of this dissertation, we next turn to methodological advances of RA for the study of Palaeoseasonality. Observational series of palaeoclimate 'proxy' records involve inherent limitations, such as irregular temporal sampling. We reveal biases in the RQA of time series with a non-stationary sampling rate and propose a correction scheme. In the second part of this thesis, we proceed with applications in Palaeoseasonality. A review of common and promising time series analysis methods shows that numerous valuable tools exist, but their sound application requires adaptions to archive-specific limitations and consolidating transdisciplinary knowledge. Next, we study stalagmite proxy records from the Central Pacific as sensitive recorders of mid-Holocene El Ni{\~n}o-Southern Oscillation (ENSO) dynamics. The records' remarkably high temporal resolution allows to draw links between ENSO and seasonal dynamics, quantified by RA. The final study presented here examines how seasonal predictability could play a role for the stability of agricultural societies. The Classic Maya underwent a period of sociopolitical disintegration that has been linked to drought events. Based on seasonally resolved stable isotope records from Yok Balum cave in Belize, we propose a measure of seasonal predictability. It unveils the potential role declining seasonal predictability could have played in destabilizing agricultural and sociopolitical systems of Classic Maya populations. The methodological approaches and applications presented in this work reveal multiple exciting future research avenues, both for RA and the study of Palaeoseasonality.}, language = {en} } @phdthesis{Wendi2018, author = {Wendi, Dadiyorto}, title = {Recurrence Plots and Quantification Analysis of Flood Runoff Dynamics}, doi = {10.25932/publishup-43191}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-431915}, school = {Universit{\"a}t Potsdam}, pages = {114}, year = {2018}, abstract = {This paper introduces a novel measure to assess similarity between event hydrographs. It is based on Cross Recurrence Plots and Recurrence Quantification Analysis which have recently gained attention in a range of disciplines when dealing with complex systems. The method attempts to quantify the event runoff dynamics and is based on the time delay embedded phase space representation of discharge hydrographs. A phase space trajectory is reconstructed from the event hydrograph, and pairs of hydrographs are compared to each other based on the distance of their phase space trajectories. Time delay embedding allows considering the multi-dimensional relationships between different points in time within the event. Hence, the temporal succession of discharge values is taken into account, such as the impact of the initial conditions on the runoff event. We provide an introduction to Cross Recurrence Plots and discuss their parameterization. An application example based on flood time series demonstrates how the method can be used to measure the similarity or dissimilarity of events, and how it can be used to detect events with rare runoff dynamics. It is argued that this methods provides a more comprehensive approach to quantify hydrograph similarity compared to conventional hydrological signatures.}, language = {en} } @phdthesis{Roezer2018, author = {R{\"o}zer, Viktor}, title = {Pluvial flood loss to private households}, doi = {10.25932/publishup-42991}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-429910}, school = {Universit{\"a}t Potsdam}, pages = {XXII, 109}, year = {2018}, abstract = {Today, more than half of the world's population lives in urban areas. With a high density of population and assets, urban areas are not only the economic, cultural and social hubs of every society, they are also highly susceptible to natural disasters. As a consequence of rising sea levels and an expected increase in extreme weather events caused by a changing climate in combination with growing cities, flooding is an increasing threat to many urban agglomerations around the globe. To mitigate the destructive consequences of flooding, appropriate risk management and adaptation strategies are required. So far, flood risk management in urban areas is almost exclusively focused on managing river and coastal flooding. Often overlooked is the risk from small-scale rainfall-triggered flooding, where the rainfall intensity of rainstorms exceeds the capacity of urban drainage systems, leading to immediate flooding. Referred to as pluvial flooding, this flood type exclusive to urban areas has caused severe losses in cities around the world. Without further intervention, losses from pluvial flooding are expected to increase in many urban areas due to an increase of impervious surfaces compounded with an aging drainage infrastructure and a projected increase in heavy precipitation events. While this requires the integration of pluvial flood risk into risk management plans, so far little is known about the adverse consequences of pluvial flooding due to a lack of both detailed data sets and studies on pluvial flood impacts. As a consequence, methods for reliably estimating pluvial flood losses, needed for pluvial flood risk assessment, are still missing. Therefore, this thesis investigates how pluvial flood losses to private households can be reliably estimated, based on an improved understanding of the drivers of pluvial flood loss. For this purpose, detailed data from pluvial flood-affected households was collected through structured telephone- and web-surveys following pluvial flood events in Germany and the Netherlands. Pluvial flood losses to households are the result of complex interactions between impact characteristics such as the water depth and a household's resistance as determined by its risk awareness, preparedness, emergency response, building properties and other influencing factors. Both exploratory analysis and machine-learning approaches were used to analyze differences in resistance and impacts between households and their effects on the resulting losses. The comparison of case studies showed that the awareness around pluvial flooding among private households is quite low. Low awareness not only challenges the effective dissemination of early warnings, but was also found to influence the implementation of private precautionary measures. The latter were predominately implemented by households with previous experience of pluvial flooding. Even cases where previous flood events affected a different part of the same city did not lead to an increase in preparedness of the surveyed households, highlighting the need to account for small-scale variability in both impact and resistance parameters when assessing pluvial flood risk. While it was concluded that the combination of low awareness, ineffective early warning and the fact that only a minority of buildings were adapted to pluvial flooding impaired the coping capacities of private households, the often low water levels still enabled households to mitigate or even prevent losses through a timely and effective emergency response. These findings were confirmed by the detection of loss-influencing variables, showing that cases in which households were able to prevent any loss to the building structure are predominately explained by resistance variables such as the household's risk awareness, while the degree of loss is mainly explained by impact variables. Based on the important loss-influencing variables detected, different flood loss models were developed. Similar to flood loss models for river floods, the empirical data from the preceding data collection was used to train flood loss models describing the relationship between impact and resistance parameters and the resulting loss to building structures. Different approaches were adapted from river flood loss models using both models with the water depth as only predictor for building structure loss and models incorporating additional variables from the preceding variable detection routine. The high predictive errors of all compared models showed that point predictions are not suitable for estimating losses on the building level, as they severely impair the reliability of the estimates. For that reason, a new probabilistic framework based on Bayesian inference was introduced that is able to provide predictive distributions instead of single loss estimates. These distributions not only give a range of probable losses, they also provide information on how likely a specific loss value is, representing the uncertainty in the loss estimate. Using probabilistic loss models, it was found that the certainty and reliability of a loss estimate on the building level is not only determined by the use of additional predictors as shown in previous studies, but also by the choice of response distribution defining the shape of the predictive distribution. Here, a mix between a beta and a Bernoulli distribution to account for households that are able to prevent losses to their building's structure was found to provide significantly more certain and reliable estimates than previous approaches using Gaussian or non-parametric response distributions. The successful model transfer and post-event application to estimate building structure loss in Houston, TX, caused by pluvial flooding during Hurricane Harvey confirmed previous findings, and demonstrated the potential of the newly developed multi-variable beta model for future risk assessments. The highly detailed input data set constructed from openly available data sources containing over 304,000 affected buildings in Harris County further showed the potential of data-driven, building-level loss models for pluvial flood risk assessment. In conclusion, pluvial flood losses to private households are the result of complex interactions between impact and resistance variables, which should be represented in loss models. The local occurrence of pluvial floods requires loss estimates on high spatial resolutions, i.e. on the building level, where losses are variable and uncertainties are high. Therefore, probabilistic loss estimates describing the uncertainty of the estimate should be used instead of point predictions. While the performance of probabilistic models on the building level are mainly driven by the choice of response distribution, multi-variable models are recommended for two reasons: First, additional resistance variables improve the detection of cases in which households were able to prevent structural losses. Second, the added variability of additional predictors provides a better representation of the uncertainties when loss estimates from multiple buildings are aggregated. This leads to the conclusion that data-driven probabilistic loss models on the building level allow for a reliable loss estimation at an unprecedented level of detail, with a consistent quantification of uncertainties on all aggregation levels. This makes the presented approach suitable for a wide range of applications, from decision support in spatial planning to impact- based early warning systems.}, language = {en} } @phdthesis{GostkowskaLekner2024, author = {Gostkowska-Lekner, Natalia Katarzyna}, title = {Organic-inorganic hybrids based on P3HT and mesoporous silicon for thermoelectric applications}, doi = {10.25932/publishup-62047}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-620475}, school = {Universit{\"a}t Potsdam}, pages = {121}, year = {2024}, abstract = {This thesis presents a comprehensive study on synthesis, structure and thermoelectric transport properties of organic-inorganic hybrids based on P3HT and porous silicon. The effect of embedding polymer in silicon pores on the electrical and thermal transport is studied. Morphological studies confirm successful polymer infiltration and diffusion doping with roughly 50\% of the pore space occupied by conjugated polymer. Synchrotron diffraction experiments reveal no specific ordering of the polymer inside the pores. P3HT-pSi hybrids show improved electrical transport by five orders of magnitude compared to porous silicon and power factor values comparable or exceeding other P3HT-inorganic hybrids. The analysis suggests different transport mechanisms in both materials. In pSi, the transport mechanism relates to a Meyer-Neldel compansation rule. The analysis of hybrids' data using the power law in Kang-Snyder model suggests that a doped polymer mainly provides charge carriers to the pSi matrix, similar to the behavior of a doped semiconductor. Heavily suppressed thermal transport in porous silicon is treated with a modified Landauer/Lundstrom model and effective medium theories, which reveal that pSi agrees well with the Kirkpatrick model with a 68\% percolation threshold. Thermal conductivities of hybrids show an increase compared to the empty pSi but the overall thermoelectric figure of merit ZT of P3HT-pSi hybrid exceeds both pSi and P3HT as well as bulk Si.}, language = {en} } @phdthesis{Kiss2024, author = {Kiss, Andrea}, title = {Moss-associated bacterial and archaeal communities of northern peatlands: key taxa, environmental drivers and potential functions}, doi = {10.25932/publishup-63064}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-630641}, school = {Universit{\"a}t Potsdam}, pages = {XX, 139, liv}, year = {2024}, abstract = {Moss-microbe associations are often characterised by syntrophic interactions between the microorganisms and their hosts, but the structure of the microbial consortia and their role in peatland development remain unknown. In order to study microbial communities of dominant peatland mosses, Sphagnum and brown mosses, and the respective environmental drivers, four study sites representing different successional stages of natural northern peatlands were chosen on a large geographical scale: two brown moss-dominated, circumneutral peatlands from the Arctic and two Sphagnum-dominated, acidic peat bogs from subarctic and temperate zones. The family Acetobacteraceae represented the dominant bacterial taxon of Sphagnum mosses from various geographical origins and displayed an integral part of the moss core community. This core community was shared among all investigated bryophytes and consisted of few but highly abundant prokaryotes, of which many appear as endophytes of Sphagnum mosses. Moreover, brown mosses and Sphagnum mosses represent habitats for archaea which were not studied in association with peatland mosses so far. Euryarchaeota that are capable of methane production (methanogens) displayed the majority of the moss-associated archaeal communities. Moss-associated methanogenesis was detected for the first time, but it was mostly negligible under laboratory conditions. Contrarily, substantial moss-associated methane oxidation was measured on both, brown mosses and Sphagnum mosses, supporting that methanotrophic bacteria as part of the moss microbiome may contribute to the reduction of methane emissions from pristine and rewetted peatlands of the northern hemisphere. Among the investigated abiotic and biotic environmental parameters, the peatland type and the host moss taxon were identified to have a major impact on the structure of moss-associated bacterial communities, contrarily to archaeal communities whose structures were similar among the investigated bryophytes. For the first time it was shown that different bog development stages harbour distinct bacterial communities, while at the same time a small core community is shared among all investigated bryophytes independent of geography and peatland type. The present thesis displays the first large-scale, systematic assessment of bacterial and archaeal communities associated both with brown mosses and Sphagnum mosses. It suggests that some host-specific moss taxa have the potential to play a key role in host moss establishment and peatland development.}, language = {en} } @phdthesis{Zeitz2022, author = {Zeitz, Maria}, title = {Modeling the future resilience of the Greenland Ice Sheet}, doi = {10.25932/publishup-56883}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-568839}, school = {Universit{\"a}t Potsdam}, pages = {x, 189}, year = {2022}, abstract = {The Greenland Ice Sheet is the second-largest mass of ice on Earth. Being almost 2000 km long, more than 700 km wide, and more than 3 km thick at the summit, it holds enough ice to raise global sea levels by 7m if melted completely. Despite its massive size, it is particularly vulnerable to anthropogenic climate change: temperatures over the Greenland Ice Sheet have increased by more than 2.7◦C in the past 30 years, twice as much as the global mean temperature. Consequently, the ice sheet has been significantly losing mass since the 1980s and the rate of loss has increased sixfold since then. Moreover, it is one of the potential tipping elements of the Earth System, which might undergo irreversible change once a warming threshold is exceeded. This thesis aims at extending the understanding of the resilience of the Greenland Ice Sheet against global warming by analyzing processes and feedbacks relevant to its centennial to multi-millennial stability using ice sheet modeling. One of these feedbacks, the melt-elevation-feedback is driven by the temperature rise with decreasing altitudes: As the ice sheet melts, its thickness and surface elevation decrease, exposing the ice surface to warmer air and thus increasing the melt rates even further. The glacial isostatic adjustment (GIA) can partly mitigate this melt-elevation feedback as the bedrock lifts in response to an ice load decrease, forming the negative GIA feedback. In my thesis, I show that the interaction between these two competing feedbacks can lead to qualitatively different dynamical responses of the Greenland Ice Sheet to warming - from permanent loss to incomplete recovery, depending on the feedback parameters. My research shows that the interaction of those feedbacks can initiate self-sustained oscillations of the ice volume while the climate forcing remains constant. Furthermore, the increased surface melt changes the optical properties of the snow or ice surface, e.g. by lowering their albedo, which in turn enhances melt rates - a process known as the melt-albedo feedback. Process-based ice sheet models often neglect this melt-albedo feedback. To close this gap, I implemented a simplified version of the diurnal Energy Balance Model, a computationally efficient approach that can capture the first-order effects of the melt-albedo feedback, into the Parallel Ice Sheet Model (PISM). Using the coupled model, I show in warming experiments that the melt-albedo feedback almost doubles the ice loss until the year 2300 under the low greenhouse gas emission scenario RCP2.6, compared to simulations where the melt-albedo feedback is neglected, and adds up to 58\% additional ice loss under the high emission scenario RCP8.5. Moreover, I find that the melt-albedo feedback dominates the ice loss until 2300, compared to the melt-elevation feedback. Another process that could influence the resilience of the Greenland Ice Sheet is the warming induced softening of the ice and the resulting increase in flow. In my thesis, I show with PISM how the uncertainty in Glen's flow law impacts the simulated response to warming. In a flow line setup at fixed climatic mass balance, the uncertainty in flow parameters leads to a range of ice loss comparable to the range caused by different warming levels. While I focus on fundamental processes, feedbacks, and their interactions in the first three projects of my thesis, I also explore the impact of specific climate scenarios on the sea level rise contribution of the Greenland Ice Sheet. To increase the carbon budget flexibility, some warming scenarios - while still staying within the limits of the Paris Agreement - include a temporal overshoot of global warming. I show that an overshoot by 0.4◦C increases the short-term and long-term ice loss from Greenland by several centimeters. The long-term increase is driven by the warming at high latitudes, which persists even when global warming is reversed. This leads to a substantial long-term commitment of the sea level rise contribution from the Greenland Ice Sheet. Overall, in my thesis I show that the melt-albedo feedback is most relevant for the ice loss of the Greenland Ice Sheet on centennial timescales. In contrast, the melt-elevation feedback and its interplay with the GIA feedback become increasingly relevant on millennial timescales. All of these influence the resilience of the Greenland Ice Sheet against global warming, in the near future and on the long term.}, language = {en} }