@phdthesis{Kolk2019,
  author    = {Kolk, Jens},
  title     = {The long-term legacy of historical land cover changes},
  doi       = {10.25932/publishup-43939},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439398},
  school      = {Universit{\"a}t Potsdam},
  pages     = {196},
  year      = {2019},
  abstract  = {Over the last years there is an increasing awareness that historical land cover changes and associated land use legacies may be important drivers for present-day species richness and biodiversity due to time-delayed extinctions or colonizations in response to historical environmental changes. Historically altered habitat patches may therefore exhibit an extinction debt or colonization credit and can be expected to lose or gain species in the future. However, extinction debts and colonization credits are difficult to detect and their actual magnitudes or payments have rarely been quantified because species richness patterns and dynamics are also shaped by recent environmental conditions and recent environmental changes. In this thesis we aimed to determine patterns of herb-layer species richness and recent species richness dynamics of forest herb layer plants and link those patterns and dynamics to historical land cover changes and associated land use legacies. The study was conducted in the Prignitz, NE-Germany, where the forest distribution remained stable for the last ca. 100 years but where a) the deciduous forest area had declined by more than 90 per cent (leaving only remnants of "ancient forests"), b) small new forests had been established on former agricultural land ("post-agricultural forests"). Here, we analyzed the relative importance of land use history and associated historical land cover changes for herb layer species richness compared to recent environmental factors and determined magnitudes of extinction debt and colonization credit and their payment in ancient and post-agricultural forests, respectively. We showed that present-day species richness patterns were still shaped by historical land cover changes that ranged back to more than a century. Although recent environmental conditions were largely comparable we found significantly more forest specialists, species with short-distance dispersal capabilities and clonals in ancient forests than in post-agricultural forests. Those species richness differences were largely contingent to a colonization credit in post-agricultural forests that ranged up to 9 species (average 4.7), while the extinction debt in ancient forests had almost completely been paid. Environmental legacies from historical agricultural land use played a minor role for species richness differences. Instead, patch connectivity was most important. Species richness in ancient forests was still dependent on historical connectivity, indicating a last glimpse of an extinction debt, and the colonization credit was highest in isolated post-agricultural forests. In post-agricultural forests that were better connected or directly adjacent to ancient forest patches the colonization credit was way smaller and we were able to verify a gradual payment of the colonization credit from 2.7 species to 1.5 species over the last six decades.},
  language  = {en}
}
@phdthesis{Trautmann2022,
  author    = {Trautmann, Tina},
  title     = {Understanding global water storage variations using model-data integration},
  doi       = {10.25932/publishup-56595},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-565954},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VIII, 141},
  year      = {2022},
  abstract  = {Climate change is one of the greatest challenges to humanity in this century, and most noticeable consequences are expected to be impacts on the water cycle - in particular the distribution and availability of water, which is fundamental for all life on Earth. In this context, it is essential to better understand where and when water is available and what processes influence variations in water storages. While estimates of the overall terrestrial water storage (TWS) variations are available from the GRACE satellites, these represent the vertically integrated signal over all water stored in ice, snow, soil moisture, groundwater and surface water bodies. Therefore, complementary observational data and hydrological models are still required to determine the partitioning of the measured signal among different water storages and to understand the underlying processes. However, the application of large-scale observational data is limited by their specific uncertainties and the incapacity to measure certain water fluxes and storages. Hydrological models, on the other hand, vary widely in their structure and process-representation, and rarely incorporate additional observational data to minimize uncertainties that arise from their simplified representation of the complex hydrologic cycle. In this context, this thesis aims to contribute to improving the understanding of global water storage variability by combining simple hydrological models with a variety of complementary Earth observation-based data. To this end, a model-data integration approach is developed, in which the parameters of a parsimonious hydrological model are calibrated against several observational constraints, inducing GRACE TWS, simultaneously, while taking into account each data's specific strengths and uncertainties. This approach is used to investigate 3 specific aspects that are relevant for modelling and understanding the composition of large-scale TWS variations. The first study focusses on Northern latitudes, where snow and cold-region processes define the hydrological cycle. While the study confirms previous findings that seasonal dynamics of TWS are dominated by the cyclic accumulation and melt of snow, it reveals that inter-annual TWS variations on the contrary, are determined by variations in liquid water storages. Additionally, it is found to be important to consider the impact of compensatory effects of spatially heterogeneous hydrological variables when aggregating the contribution of different storage components over large areas. Hence, the determinants of TWS variations are scale-dependent and underlying driving mechanism cannot be simply transferred between spatial and temporal scales. These findings are supported by the second study for the global land areas beyond the Northern latitudes as well. This second study further identifies the considerable impact of how vegetation is represented in hydrological models on the partitioning of TWS variations. Using spatio-temporal varying fields of Earth observation-based data to parameterize vegetation activity not only significantly improves model performance, but also reduces parameter equifinality and process uncertainties. Moreover, the representation of vegetation drastically changes the contribution of different water storages to overall TWS variability, emphasizing the key role of vegetation for water allocation, especially between sub-surface and delayed water storages. However, the study also identifies parameter equifinality regarding the decay of sub-surface and delayed water storages by either evapotranspiration or runoff, and thus emphasizes the need for further constraints hereof. The third study focuses on the role of river water storage, in particular whether it is necessary to include computationally expensive river routing for model calibration and validation against the integrated GRACE TWS. The results suggest that river routing is not required for model calibration in such a global model-data integration approach, due to the larger influence other observational constraints, and the determinability of certain model parameters and associated processes are identified as issues of greater relevance. In contrast to model calibration, considering river water storage derived from routing schemes can already significantly improve modelled TWS compared to GRACE observations, and thus should be considered for model evaluation against GRACE data. Beyond these specific findings that contribute to improved understanding and modelling of large-scale TWS variations, this thesis demonstrates the potential of combining simple modeling approaches with diverse Earth observational data to improve model simulations, overcome inconsistencies of different observational data sets, and identify areas that require further research. These findings encourage future efforts to take advantage of the increasing number of diverse global observational data.},
  language  = {en}
}
@phdthesis{Brenner2022,
  author    = {Brenner, Andri Caspar},
  title     = {Sustainable urban growth},
  doi       = {10.25932/publishup-55522},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-555223},
  school      = {Universit{\"a}t Potsdam},
  pages     = {231},
  year      = {2022},
  abstract  = {This dissertation explores the determinants for sustainable and socially optimalgrowth in a city. Two general equilibrium models establish the base for this evaluation, each adding its puzzle piece to the urban sustainability discourse and examining the role of non-market-based and market-based policies for balanced growth and welfare improvements in different theory settings. Sustainable urban growth either calls for policy actions or a green energy transition. Further, R\&D market failures can pose severe challenges to the sustainability of urban growth and the social optimality of decentralized allocation decisions. Still, a careful (holistic) combination of policy instruments can achieve sustainable growth and even be first best.},
  language  = {en}
}
@phdthesis{Neuendorf2022,
  author    = {Neuendorf, Claudia},
  title     = {Leistungsstarke Sch{\"u}lerinnen und Sch{\"u}ler in Deutschland},
  doi       = {10.25932/publishup-56470},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-564702},
  school      = {Universit{\"a}t Potsdam},
  pages     = {203},
  year      = {2022},
  abstract  = {Die vorliegende kumulative Promotionsarbeit besch{\"a}ftigt sich mit leistungsstarken Sch{\"u}lerinnen und Sch{\"u}lern, die seit 2015 in der deutschen Bildungspolitik, zum Beispiel im Rahmen von F{\"o}rderprogrammen wieder mehr Raum einnehmen, nachdem in Folge des „PISA-Schocks" im Jahr 2000 zun{\"a}chst der Fokus st{\"a}rker auf den Risikogruppen lag. W{\"a}hrend leistungsst{\"a}rkere Sch{\"u}lerinnen und Sch{\"u}ler in der {\"o}ffentlichen Wahrnehmung h{\"a}ufig mit „(Hoch-)Begabten" identifiziert werden, geht die Arbeit {\"u}ber die traditionelle Begabungsforschung, die eine generelle Intelligenz als Grundlage f{\"u}r Leistungsf{\"a}higkeit von Sch{\"u}lerinnen und Sch{\"u}lern begreift und beforscht, hinaus. Stattdessen l{\"a}sst sich eher in den Bereich der Talentforschung einordnen, die den Fokus weg von allgemeinen Begabungen auf spezifische Pr{\"a}diktoren und Outcomes im individuellen Entwicklungsverlauf legt. Der Fokus der Arbeit liegt daher nicht auf Intelligenz als Potenzial, sondern auf der aktuellen schulischen Leistung, die als Ergebnis und Ausgangspunkt von Entwicklungsprozessen in einer Leistungsdom{\"a}ne doppelte Bedeutung erh{\"a}lt. Die Arbeit erkennt die Vielgestaltigkeit des Leistungsbegriffs an und ist bestrebt, neue Anl{\"a}sse zu schaffen, {\"u}ber den Leistungsbegriff und seine Operationalisierung in der Forschung zu diskutieren. Hierf{\"u}r wird im ersten Teil ein systematisches Review zur Operationalisierung von Leistungsst{\"a}rke durchgef{\"u}hrt (Artikel I). Es werden Faktoren herausgearbeitet, auf welchen sich die Operationalisierungen unterscheiden k{\"o}nnen. Weiterhin wird ein {\"U}berblick gegeben, wie Studien zu Leistungsstarken sich seit dem Jahr 2000 auf diesen Dimensionen verorten lassen. Es zeigt sich, dass eindeutige Konventionen zur Definition schulischer Leistungsst{\"a}rke noch nicht existieren, woraus folgt, dass Ergebnisse aus Studien, die sich mit leistungsstarken Sch{\"u}lerinnen und Sch{\"u}lern besch{\"a}ftigen, nur bedingt miteinander vergleichbar sind. Im zweiten Teil der Arbeit wird im Rahmen zwei weiterer Artikel, welche sich mit der Leistungsentwicklung (Artikel II) und der sozialen Einbindung (Artikel III) von leistungsstarken Sch{\"u}lerinnen und Sch{\"u}lern befassen, darauf aufbauend der Ansatz verfolgt, die Variabilit{\"a}t von Ergebnissen {\"u}ber verschiedene Operationalisierungen von Leistungsst{\"a}rke deutlich zu machen. Damit wird unter anderem auch die k{\"u}nftige Vergleichbarkeit mit anderen Studien erleichtert. Genutzt wird dabei das Konzept der Multiversumsanalyse (Steegen et al., 2016), bei welcher viele parallele Spezifikationen, die zugleich sinnvolle Alternativen f{\"u}r die Operationalisierung darstellen, nebeneinandergestellt und in ihrem Effekt verglichen werden (Jansen et al., 2021). Die Multiversumsanalyse kn{\"u}pft konzeptuell an das bereits vor l{\"a}ngerem entwickelte Forschungsprogramm des kritischen Multiplismus an (Patry, 2013; Shadish, 1986, 1993), erh{\"a}lt aber als spezifische Methode aktuell im Rahmen der Replizierbarkeitskrise in der Psychologie eine besondere Bedeutung. Dabei st{\"u}tzt sich die vorliegende Arbeit auf die Sekund{\"a}ranalyse großangelegter Schulleistungsstudien, welche den Vorteil besitzen, dass eine große Zahl an Datenpunkten (Variablen und Personen) zur Verf{\"u}gung steht, um Effekte unterschiedlicher Operationalisierungen zu vergleichen. Inhaltlich greifen Artikel II und III Themen auf, die in der wissenschaftlichen und gesellschaftlichen Diskussion zu Leistungsstarken und ihrer Wahrnehmung in der {\"O}ffentlichkeit immer wieder aufscheinen: In Artikel II wird zun{\"a}chst die Frage gestellt, ob Leistungsstarke bereits im aktuellen Regelunterricht einen kumulativen Vorteil gegen{\"u}ber ihren weniger leistungsstarken Mitsch{\"u}lerinnen und Mitsch{\"u}lern haben (Matth{\"a}us-Effekt). Die Ergebnisse zeigen, dass an Gymnasien keineswegs von sich vergr{\"o}ßernden Unterschieden gesprochen werden kann. Im Gegenteil, es verringerte sich im Laufe der Sekundarstufe der Abstand zwischen den Gruppen, indem die Lernraten bei leistungsschw{\"a}cheren Sch{\"u}lerinnen und Sch{\"u}lern h{\"o}her waren. Artikel III hingegen betrifft die soziale Wahrnehmung von leistungsstarken Sch{\"u}lerinnen und Sch{\"u}lern. Auch hier h{\"a}lt sich in der {\"o}ffentlichen Diskussion die Annahme, dass h{\"o}here Leistungen mit Nachteilen in der sozialen Integration einhergehen k{\"o}nnten, was sich auch in Studien widerspiegelt, die sich mit Geschlechterstereotypen Jugendlicher in Bezug auf Schulleistung besch{\"a}ftigen. In Artikel III wird unter anderem erneut das Potenzial der Multiversumsanalyse genutzt, um die Variation des Zusammenhangs {\"u}ber Operationalisierungen von Leistungsst{\"a}rke zu beschreiben. Es zeigt sich unter unterschiedlichen Operationalisierungen von Leistungsst{\"a}rke und {\"u}ber verschiedene Facetten sozialer Integration hinweg, dass die Zusammenh{\"a}nge zwischen Leistung und sozialer Integration insgesamt leicht positiv ausfallen. Annahmen, die auf differenzielle Effekte f{\"u}r Jungen und M{\"a}dchen oder f{\"u}r unterschiedliche F{\"a}cher abzielen, finden in diesen Analysen keine Best{\"a}tigung. Die Dissertation zeigt, dass der Vergleich unterschiedlicher Ans{\"a}tze zur Operationalisierung von Leistungsst{\"a}rke — eingesetzt im Rahmen eines kritischen Multiplismus — das Verst{\"a}ndnis von Ph{\"a}nomenen vertiefen kann und auch das Potenzial hat, Theorieentwicklung voranzubringen.},
  language  = {de}
}
@phdthesis{Schemenz2022,
  author    = {Schemenz, Victoria},
  title     = {Correlations between osteocyte lacuno-canalicular network and material characteristics in bone adaptation and regeneration},
  doi       = {10.25932/publishup-55959},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559593},
  school      = {Universit{\"a}t Potsdam},
  pages     = {3, xii, 146},
  year      = {2022},
  abstract  = {The complex hierarchical structure of bone undergoes a lifelong remodeling process, where it adapts to mechanical needs. Hereby, bone resorption by osteoclasts and bone formation by osteoblasts have to be balanced to sustain a healthy and stable organ. Osteocytes orchestrate this interplay by sensing mechanical strains and translating them into biochemical signals. The osteocytes are located in lacunae and are connected to one another and other bone cells via cell processes through small channels, the canaliculi. Lacunae and canaliculi form a network (LCN) of extracellular spaces that is able to transport ions and enables cell-to-cell communication. Osteocytes might also contribute to mineral homeostasis by direct interactions with the surrounding matrix. If the LCN is acting as a transport system, this should be reflected in the mineralization pattern. The central hypothesis of this thesis is that osteocytes are actively changing their material environment. Characterization methods of material science are used to achieve the aim of detecting traces of this interaction between osteocytes and the extracellular matrix. First, healthy murine bones were characterized. The properties analyzed were then compared with three murine model systems: 1) a loading model, where a bone of the mouse was loaded during its life time; 2) a healing model, where a bone of the mouse was cut to induce a healing response; and 3) a disease model, where the Fbn1 gene is dysfunctional causing defects in the formation of the extracellular tissue. The measurement strategy included routines that make it possible to analyze the organization of the LCN and the material components (i.e., the organic collagen matrix and the mineral particles) in the same bone volumes and compare the spatial distribution of different data sets. The three-dimensional network architecture of the LCN is visualized by confocal laser scanning microscopy (CLSM) after rhodamine staining and is then subsequently quantified. The calcium content is determined via quantitative backscattered electron imaging (qBEI), while small- and wide-angle X-ray scattering (SAXS and WAXS) are employed to determine the thickness and length of local mineral particles. First, tibiae cortices of healthy mice were characterized to investigate how changes in LCN architecture can be attributed to interactions of osteocytes with the surrounding bone matrix. The tibial mid-shaft cross-sections showed two main regions, consisting of a band with unordered LCN surrounded by a region with ordered LCN. The unordered region is a remnant of early bone formation and exhibited short and thin mineral particles. The surrounding, more aligned bone showed ordered and dense LCN as well as thicker and longer mineral particles. The calcium content was unchanged between the two regions. In the mouse loading model, the left tibia underwent two weeks of mechanical stimulation, which results in increased bone formation and decreased resorption in skeletally mature mice. Here the specific research question addressed was how do bone material characteristics change at (re)modeling sites? The new bone formed in response to mechanical stimulation showed similar properties in terms of the mineral particles, like the ordered calcium region but lower calcium content compared to the right, non-loaded control bone of the same mice. There was a clear, recognizable border between mature and newly formed bone. Nevertheless, some canaliculi went through this border connecting the LCN of mature and newly formed bone. Additionally, the question should be answered whether the LCN topology and the bone matrix material properties adapt to loading. Although, mechanically stimulated bones did not show differences in calcium content compared to controls, different correlations were found between the local LCN density and the local Ca content depending on whether the bone was loaded or not. These results suggest that the LCN may serve as a mineral reservoir. For the healing model, the femurs of mice underwent an osteotomy, stabilized with an external fixator and were allowed to heal for 21 days. Thus, the spatial variations in the LCN topology with mineral properties within different tissue types and their interfaces, namely calcified cartilage, bony callus and cortex, could be simultaneously visualized and compared in this model. All tissue types showed structural differences across multiple length scales. Calcium content increased and became more homogeneous from calcified cartilage to bony callus to lamellar cortical bone. The degree of LCN organization increased as well, while the lacunae became smaller, as did the lacunar density between these different tissue types that make up the callus. In the calcified cartilage, the mineral particles were short and thin. The newly formed callus exhibited thicker mineral particles, which still had a low degree of orientation. While most of the callus had a woven-like structure, it also served as a scaffold for more lamellar tissue at the edges. The lamelar bone callus showed thinner mineral particles, but a higher degree of alignment in both, mineral particles and the LCN. The cortex showed the highest values for mineral length, thickness and degree of orientation. At the same time, the lacunae number density was 34\% lower and the lacunar volume 40\% smaller compared to bony callus. The transition zone between cortical and callus regions showed a continuous convergence of bone mineral properties and lacunae shape. Although only a few canaliculi connected callus and the cortical region, this indicates that communication between osteocytes of both tissues should be possible. The presented correlations between LCN architecture and mineral properties across tissue types may suggest that osteocytes have an active role in mineralization processes of healing. A mouse model for the disease marfan syndrome, which includes a genetic defect in the fibrillin-1 gene, was investigated. In humans, Marfan syndrome is characterized by a range of clinical symptoms such as long bone overgrowth, loose joints, reduced bone mineral density, compromised bone microarchitecture, and increased fracture rates. Thus, fibrillin-1 seems to play a role in the skeletal homeostasis. Therefore, the present work studied how marfan syndrome alters LCN architecture and the surrounding bone matrix. The mice with marfan syndrome showed longer tibiae than their healthy littermates from an age of seven weeks onwards. In contrast, the cortical development appeared retarded, which was observed across all measured characteristics, i. e. lower endocortical bone formation, looser and less organized lacuno-canalicular network, less collagen orientation, thinner and shorter mineral particles. In each of the three model systems, this study found that changes in the LCN architecture spatially correlated with bone matrix material parameters. While not knowing the exact mechanism, these results provide indications that osteocytes can actively manipulate a mineral reservoir located around the canaliculi to make a quickly accessible contribution to mineral homeostasis. However, this interaction is most likely not one-sided, but could be understood as an interplay between osteocytes and extra-cellular matrix, since the bone matrix contains biochemical signaling molecules (e.g. non-collagenous proteins) that can change osteocyte behavior. Bone (re)modeling can therefore not only be understood as a method for removing defects or adapting to external mechanical stimuli, but also for increasing the efficiency of possible osteocyte-mineral interactions during bone homeostasis. With these findings, it seems reasonable to consider osteocytes as a target for drug development related to bone diseases that cause changes in bone composition and mechanical properties. It will most likely require the combined effort of materials scientists, cell biologists, and molecular biologists to gain a deeper understanding of how bone cells respond to their material environment.},
  language  = {en}
}
@phdthesis{Forster2021,
  author    = {Forster, Florian},
  title     = {Continuous microgravity monitoring of the Þeistareykir geothermal field (North Iceland)},
  doi       = {10.25932/publishup-54851},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-548517},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVII, 164},
  year      = {2021},
  abstract  = {In my doctoral thesis, I examine continuous gravity measurements for monitoring of the geothermal site at Þeistareykir in North Iceland. With the help of high-precision superconducting gravity meters (iGravs), I investigate underground mass changes that are caused by operation of the geothermal power plant (i.e. by extraction of hot water and reinjection of cold water). The overall goal of this research project is to make a statement about the sustainable use of the geothermal reservoir, from which also the Icelandic energy supplier and power plant operator Landsvirkjun should benefit. As a first step, for investigating the performance and measurement stability of the gravity meters, in summer 2017, I performed comparative measurements at the gravimetric observatory J9 in Strasbourg. From the three-month gravity time series, I examined calibration, noise and drift behaviour of the iGravs in comparison to stable long-term time series of the observatory superconducting gravity meters. After preparatory work in Iceland (setup of gravity stations, additional measuring equipment and infrastructure, discussions with Landsvirkjun and meetings with the Icelandic partner institute ISOR), gravity monitoring at Þeistareykir was started in December 2017. With the help of the iGrav records of the initial 18 months after start of measurements, I carried out the same investigations (on calibration, noise and drift behaviour) as in J9 to understand how the transport of the superconducting gravity meters to Iceland may influence instrumental parameters. In the further course of this work, I focus on modelling and reduction of local gravity contributions at Þeistareykir. These comprise additional mass changes due to rain, snowfall and vertical surface displacements that superimpose onto the geothermal signal of the gravity measurements. For this purpose, I used data sets from additional monitoring sensors that are installed at each gravity station and adapted scripts for hydro-gravitational modelling. The third part of my thesis targets geothermal signals in the gravity measurements. Together with my PhD colleague Nolwenn Portier from France, I carried out additional gravity measurements with a Scintrex CG5 gravity meter at 26 measuring points within the geothermal field in the summers of 2017, 2018 and 2019. These annual time-lapse gravity measurements are intended to increase the spatial coverage of gravity data from the three continuous monitoring stations to the entire geothermal field. The combination of CG5 and iGrav observations, as well as annual reference measurements with an FG5 absolute gravity meter represent the hybrid gravimetric monitoring method for Þeistareykir. Comparison of the gravimetric data to local borehole measurements (of groundwater levels, geothermal extraction and injection rates) is used to relate the observed gravity changes to the actually extracted (and reinjected) geothermal fluids. An approach to explain the observed gravity signals by means of forward modelling of the geothermal production rate is presented at the end of the third (hybrid gravimetric) study. Further modelling with the help of the processed gravity data is planned by Landsvirkjun. In addition, the experience from time-lapse and continuous gravity monitoring will be used for future gravity measurements at the Krafla geothermal field 22 km south-east of Þeistareykir.},
  language  = {en}
}
@phdthesis{Farkas2022,
  author    = {Farkas, Marton Pal},
  title     = {Hydraulic fracturing in hard rock - numerical studies from laboratory to reservoir scale},
  doi       = {10.25932/publishup-54934},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549343},
  school      = {Universit{\"a}t Potsdam},
  pages     = {155},
  year      = {2022},
  abstract  = {Hydraulic-driven fractures play a key role in subsurface energy technologies across several scales. By injecting fluid at high hydraulic pressure into rock with intrinsic low permeability, in-situ stress field and fracture development pattern can be characterised as well as rock permeability can be enhanced. Hydraulic fracturing is a commercial standard procedure for enhanced oil and gas production of rock reservoirs with low permeability in petroleum industry. However, in EGS utilization, a major geological concern is the unsolicited generation of earthquakes due to fault reactivation, referred to as induced seismicity, with a magnitude large enough to be felt on the surface or to damage facilities and buildings. Furthermore, reliable interpretation of hydraulic fracturing tests for stress measurement is a great challenge for the energy technologies. Therefore, in this cumulative doctoral thesis the following research questions are investigated. (1): How do hydraulic fractures grow in hard rock at various scales?; (2): Which parameters control hydraulic fracturing and hydro-mechanical coupling?; and (3): How can hydraulic fracturing in hard rock be modelled? In the laboratory scale study, several laboratory hydraulic fracturing experiments are investigated numerically using Irazu2D that were performed on intact cubic Pocheon granite samples from South Korea applying different injection protocols. The goal of the laboratory experiments is to test the concept of cyclic soft stimulation which may enable sustainable permeability enhancement (Publication 1). In the borehole scale study, hydraulic fracturing tests are reported that were performed in boreholes located in central Hungary to determine the in-situ stress for a geological site investigation. At depth of about 540 m, the recorded pressure versus time curves in mica schist with low dip angle foliation show atypical evolution. In order to provide explanation for this observation, a series of discrete element computations using Particle Flow Code 2D are performed (Publication 2). In the reservoir scale study, the hydro-mechanical behaviour of fractured crystalline rock due to one of the five hydraulic stimulations at the Pohang Enhanced Geothermal site in South Korea is studied. Fluid pressure perturbation at faults of several hundred-meter lengths during hydraulic stimulation is simulated using FracMan (Publication 3). The doctoral research shows that the resulting hydraulic fracturing geometry will depend "locally", i.e. at the length scale of representative elementary volume (REV) and below that (sub-REV), on the geometry and strength of natural fractures, and "globally", i.e. at super-REV domain volume, on far-field stresses. Regarding hydro-mechanical coupling, it is suggested to define separate coupling relationship for intact rock mass and natural fractures. Furthermore, the relative importance of parameters affecting the magnitude of formation breakdown pressure, a parameter characterising hydro-mechanical coupling, is defined. It can be also concluded that there is a clear gap between the capacity of the simulation software and the complexity of the studied problems. Therefore, the computational time of the simulation of complex hydraulic fracture geometries must be reduced while maintaining high fidelity simulation results. This can be achieved either by extending the computational resources via parallelization techniques or using time scaling techniques. The ongoing development of used numerical models focuses on tackling these methodological challenges.},
  language  = {en}
}
@phdthesis{Muench2021,
  author    = {M{\"u}nch, Steffen},
  title     = {The relevance of the aeolian transport path for the spread of antibiotic-resistant bacteria on arable fields},
  doi       = {10.25932/publishup-53608},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-536089},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVI, 140},
  year      = {2021},
  abstract  = {The spread of antibiotic-resistant bacteria poses a globally increasing threat to public health care. The excessive use of antibiotics in animal husbandry can develop resistances in the stables. Transmission through direct contact with animals and contamination of food has already been proven. The excrements of the animals combined with a binding material enable a further potential path of spread into the environment, if they are used as organic manure in agricultural landscapes. As most of the airborne bacteria are attached to particulate matter, the focus of the work will be the atmospheric dispersal via the dust fraction. Field measurements on arable lands in Brandenburg, Germany and wind erosion studies in a wind tunnel were conducted to investigate the risk of a potential atmospheric dust-associated spread of antibiotic-resistant bacteria from poultry manure fertilized agricultural soils. The focus was to (i) characterize the conditions for aerosolization and (ii) qualify and quantify dust emissions during agricultural operations and wind erosion. PM10 (PM, particulate matter with an aerodynamic diameter smaller than 10 µm) emission factors and bacterial fluxes for poultry manure application and incorporation have not been previously reported before. The contribution to dust emissions depends on the water content of the manure, which is affected by the manure pretreatment (fresh, composted, stored, dried), as well as by the intensity of manure spreading from the manure spreader. During poultry manure application, PM10 emission ranged between 0.05 kg ha-1 and 8.37 kg ha-1. For comparison, the subsequent land preparation contributes to 0.35 - 1.15 kg ha-1 of PM10 emissions. Manure particles were still part of dust emissions but they were accounted to be less than 1\% of total PM10 emissions due to the dilution of poultry manure in the soil after manure incorporation. Bacterial emissions of fecal origin were more relevant during manure application than during the subsequent manure incorporation, although PM10 emissions of manure incorporation were larger than PM10 emissions of manure application for the non-dried manure variants. Wind erosion leads to preferred detachment of manure particles from sandy soils, when poultry manure has been recently incorporated. Sorting effects were determined between the low-density organic particles of manure origin and the soil particles of mineral origin close above the threshold of 7 m s-1. In dependence to the wind speed, potential erosion rates between 101 and 854 kg ha-1 were identified, if 6 t ha-1 of poultry manure were applied. Microbial investigation showed that manure bacteria got detached more easily from the soil surface during wind erosion, due to their attachment on manure particles. Although antibiotic-resistant bacteria (ESBL-producing E. coli) were still found in the poultry barns, no further contamination could be detected with them in the manure, fertilized soils or in the dust generated by manure application, land preparation or wind erosion. Parallel studies of this project showed that storage of poultry manure for a few days (36 - 72 h) is sufficient to inactivate ESBL-producing E. coli. Further antibiotic-resistant bacteria, i.e. MRSA and VRE, were only found sporadically in the stables and not at all in the dust. Therefore, based on the results of this work, the risk of a potential infection by dust-associated antibiotic-resistant bacteria can be considered as low.},
  language  = {en}
}
@phdthesis{MbayaMani2017,
  author    = {Mbaya Mani, Christian},
  title     = {Functional nanoporous carbon-based materials derived from oxocarbon-metal coordination complexes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407866},
  school      = {Universit{\"a}t Potsdam},
  pages     = {IV, 135},
  year      = {2017},
  abstract  = {Nanoporous carbon based materials are of particular interest for both science and industry due to their exceptional properties such as a large surface area, high pore volume, high electroconductivity as well as high chemical and thermal stability. Benefiting from these advantageous properties, nanoporous carbons proved to be useful in various energy and environment related applications including energy storage and conversion, catalysis, gas sorption and separation technologies. The synthesis of nanoporous carbons classically involves thermal carbonization of the carbon precursors (e.g. phenolic resins, polyacrylonitrile, poly(vinyl alcohol) etc.) followed by an activation step and/or it makes use of classical hard or soft templates to obtain well-defined porous structures. However, these synthesis strategies are complicated and costly; and make use of hazardous chemicals, hindering their application for large-scale production. Furthermore, control over the carbon materials properties is challenging owing to the relatively unpredictable processes at the high carbonization temperatures. In the present thesis, nanoporous carbon based materials are prepared by the direct heat treatment of crystalline precursor materials with pre-defined properties. This synthesis strategy does not require any additional carbon sources or classical hard- or soft templates. The highly stable and porous crystalline precursors are based on coordination compounds of the squarate and croconate ions with various divalent metal ions including Zn2+, Cu2+, Ni2+, and Co2+, respectively. Here, the structural properties of the crystals can be controlled by the choice of appropriate synthesis conditions such as the crystal aging temperature, the ligand/metal molar ratio, the metal ion, and the organic ligand system. In this context, the coordination of the squarate ions to Zn2+ yields porous 3D cube crystalline particles. The morphology of the cubes can be tuned from densely packed cubes with a smooth surface to cubes with intriguing micrometer-sized openings and voids which evolve on the centers of the low index faces as the crystal aging temperature is raised. By varying the molar ratio, the particle shape can be changed from truncated cubes to perfect cubes with right-angled edges. These crystalline precursors can be easily transformed into the respective carbon based materials by heat treatment at elevated temperatures in a nitrogen atmosphere followed by a facile washing step. The resulting carbons are obtained in good yields and possess a hierarchical pore structure with well-organized and interconnected micro-, meso- and macropores. Moreover, high surface areas and large pore volumes of up to 1957 m2 g-1 and 2.31 cm3 g-1 are achieved, respectively, whereby the macroscopic structure of the precursors is preserved throughout the whole synthesis procedure. Owing to these advantageous properties, the resulting carbon based materials represent promising supercapacitor electrode materials for energy storage applications. This is exemplarily demonstrated by employing the 3D hierarchical porous carbon cubes derived from squarate-zinc coordination compounds as electrode material showing a specific capacitance of 133 F g-1 in H2SO4 at a scan rate of 5 mV s-1 and retaining 67\% of this specific capacitance when the scan rate is increased to 200 mV s-1. In a further application, the porous carbon cubes derived from squarate-zinc coordination compounds are used as high surface area support material and decorated with nickel nanoparticles via an incipient wetness impregnation. The resulting composite material combines a high surface area, a hierarchical pore structure with high functionality and well-accessible pores. Moreover, owing to their regular micro-cube shape, they allow for a good packing of a fixed-bed flow reactor along with high column efficiency and a minimized pressure drop throughout the packed reactor. Therefore, the composite is employed as heterogeneous catalyst in the selective hydrogenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran showing good catalytic performance and overcoming the conventional problem of column blocking. Thinking about the rational design of 3D carbon geometries, the functions and properties of the resulting carbon-based materials can be further expanded by the rational introduction of heteroatoms (e.g. N, B, S, P, etc.) into the carbon structures in order to alter properties such as wettability, surface polarity as well as the electrochemical landscape. In this context, the use of crystalline materials based on oxocarbon-metal ion complexes can open a platform of highly functional materials for all processes that involve surface processes.},
  language  = {en}
}
@phdthesis{Schmitz2023,
  author    = {Schmitz, Se{\´a}n},
  title     = {Using low-cost sensors to gather high resolution measurements of air quality in urban environments and inform mobility policy},
  doi       = {10.25932/publishup-60105},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-601053},
  school      = {Universit{\"a}t Potsdam},
  pages     = {180},
  year      = {2023},
  abstract  = {Air pollution has been a persistent global problem in the past several hundred years. While some industrialized nations have shown improvements in their air quality through stricter regulation, others have experienced declines as they rapidly industrialize. The WHO's 2021 update of their recommended air pollution limit values reflects the substantial impacts on human health of pollutants such as NO2 and O3, as recent epidemiological evidence suggests substantial long-term health impacts of air pollution even at low concentrations. Alongside developments in our understanding of air pollution's health impacts, the new technology of low-cost sensors (LCS) has been taken up by both academia and industry as a new method for measuring air pollution. Due primarily to their lower cost and smaller size, they can be used in a variety of different applications, including in the development of higher resolution measurement networks, in source identification, and in measurements of air pollution exposure. While significant efforts have been made to accurately calibrate LCS with reference instrumentation and various statistical models, accuracy and precision remain limited by variable sensor sensitivity. Furthermore, standard procedures for calibration still do not exist and most proprietary calibration algorithms are black-box, inaccessible to the public. This work seeks to expand the knowledge base on LCS in several different ways: 1) by developing an open-source calibration methodology; 2) by deploying LCS at high spatial resolution in urban environments to test their capability in measuring microscale changes in urban air pollution; 3) by connecting LCS deployments with the implementation of local mobility policies to provide policy advice on resultant changes in air quality. In a first step, it was found that LCS can be consistently calibrated with good performance against reference instrumentation using seven general steps: 1) assessing raw data distribution, 2) cleaning data, 3) flagging data, 4) model selection and tuning, 5) model validation, 6) exporting final predictions, and 7) calculating associated uncertainty. By emphasizing the need for consistent reporting of details at each step, most crucially on model selection, validation, and performance, this work pushed forward with the effort towards standardization of calibration methodologies. In addition, with the open-source publication of code and data for the seven-step methodology, advances were made towards reforming the largely black-box nature of LCS calibrations. With a transparent and reliable calibration methodology established, LCS were then deployed in various street canyons between 2017 and 2020. Using two types of LCS, metal oxide (MOS) and electrochemical (EC), their performance in capturing expected patterns of urban NO2 and O3 pollution was evaluated. Results showed that calibrated concentrations from MOS and EC sensors matched general diurnal patterns in NO2 and O3 pollution measured using reference instruments. While MOS proved to be unreliable for discerning differences among measured locations within the urban environment, the concentrations measured with calibrated EC sensors matched expectations from modelling studies on NO2 and O3 pollution distribution in street canyons. As such, it was concluded that LCS are appropriate for measuring urban air quality, including for assisting urban-scale air pollution model development, and can reveal new insights into air pollution in urban environments. To achieve the last goal of this work, two measurement campaigns were conducted in connection with the implementation of three mobility policies in Berlin. The first involved the construction of a pop-up bike lane on Kottbusser Damm in response to the COVID-19 pandemic, the second surrounded the temporary implementation of a community space on B{\"o}ckhstrasse, and the last was focused on the closure of a portion of Friedrichstrasse to all motorized traffic. In all cases, measurements of NO2 were collected before and after the measure was implemented to assess changes in air quality resultant from these policies. Results from the Kottbusser Damm experiment showed that the bike-lane reduced NO2 concentrations that cyclists were exposed to by 22 ± 19\%. On Friedrichstrasse, the street closure reduced NO2 concentrations to the level of the urban background without worsening the air quality on side streets. These valuable results were communicated swiftly to partners in the city administration responsible for evaluating the policies' success and future, highlighting the ability of LCS to provide policy-relevant results. As a new technology, much is still to be learned about LCS and their value to academic research in the atmospheric sciences. Nevertheless, this work has advanced the state of the art in several ways. First, it contributed a novel open-source calibration methodology that can be used by a LCS end-users for various air pollutants. Second, it strengthened the evidence base on the reliability of LCS for measuring urban air quality, finding through novel deployments in street canyons that LCS can be used at high spatial resolution to understand microscale air pollution dynamics. Last, it is the first of its kind to connect LCS measurements directly with mobility policies to understand their influences on local air quality, resulting in policy-relevant findings valuable for decisionmakers. It serves as an example of the potential for LCS to expand our understanding of air pollution at various scales, as well as their ability to serve as valuable tools in transdisciplinary research.},
  language  = {en}
}