@phdthesis{Stoll2022,
  author    = {Stoll, Andreas},
  title     = {Advanced spectroscopic instruments enabled by integrated optics},
  school      = {Universit{\"a}t Potsdam},
  pages     = {97, XV},
  year      = {2022},
  abstract  = {The aim of this work is the study of silica Arrayed Waveguide Gratings (AWGs) in the context of applications in astronomy. The specific focus lies on the investigation of the feasibility and technology limits of customized silica AWG devices for high resolution near-infrared spectroscopy. In a series of theoretical and experimental studies, AWG devices of varying geometry, foot-print and spectral resolution are constructed, simulated using a combination of a numerical beam propagation method and Fraunhofer diffraction and fabricated devices are characterized with respect to transmission efficiency, spectral resolution and polarization sensitivity. The impact of effective index non-uniformities on the performance of high-resolution AWG devices is studied numerically. Characterization results of fabricated devices are used to extrapolate the technology limits of the silica platform. The important issues of waveguide birefringence and defocus aberration are discussed theoretically and addressed experimentally by selection of an appropriate aberration-minimizing anastigmatic AWG layout structure. The drawbacks of the anastigmatic AWG geometry are discussed theoretically. From the results of the experimental studies, it is concluded that fabrication-related phase errors and waveguide birefringence are the primary limiting factors for the growth of AWG spectral resolution. It is shown that, without post-processing, the spectral resolving power is phase-error-limited to R < 40, 000 and, in the case of unpolarized light, birefringence-limited to R < 30, 000 in the AWG devices presented in this work. Necessary measures, such as special waveguide geometries and post-fabrication phase error correction are proposed for future designs. The elimination of defocus aberration using an anastigmatic AWG geometry is successfully demonstrated in experiment. Finally, a novel, non-planar dispersive in-fibre waveguide structure is proposed, discussed and studied theoretically.},
  language  = {en}
}
@phdthesis{Ilin2022,
  author    = {Ilin, Ekaterina},
  title     = {High lights: stellar flares as probes of magnetism in stars and star-planet systems},
  doi       = {10.25932/publishup-56356},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-563565},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 168},
  year      = {2022},
  abstract  = {Flares are magnetically driven explosions that occur in the atmospheres of all main sequence stars that possess an outer convection zone. Flaring activity is rooted in the magnetic dynamo that operates deep in the stellar interior, propagates through all layers of the atmosphere from the corona to the photosphere, and emits electromagnetic radiation from radio bands to X-ray. Eventually, this radiation, and associated eruptions of energetic particles, are ejected out into interplanetary space, where they impact planetary atmospheres, and dominate the space weather environments of young star-planet systems. Thanks to the Kepler and the Transit Exoplanet Survey Satellite (TESS) missions, flare observations have become accessible for millions of stars and star-planet systems. The goal of this thesis is to use these flares as multifaceted messengers to understand stellar magnetism across the main sequence, investigate planetary habitability, and explore how close-in planets can affect the host star. Using space based observations obtained by the Kepler/K2 mission, I found that flaring activity declines with stellar age, but this decline crucially depends on stellar mass and rotation. I calibrated the age of the stars in my sample using their membership in open clusters from zero age main sequence to solar age. This allowed me to reveal the rapid transition from an active, saturated flaring state to a more quiescent, inactive flaring behavior in early M dwarfs at about 600-800 Myr. This result is an important observational constraint on stellar activity evolution that I was able to de-bias using open clusters as an activity-independent age indicator. The TESS mission quickly superseded Kepler and K2 as the main source of flares in low mass M dwarfs. Using TESS 2-minute cadence light curves, I developed a new technique for flare localization and discovered, against the commonly held belief, that flares do not occur uniformly across their stellar surface: In fast rotating fully convective stars, giant flares are preferably located at high latitudes. This bears implications for both our understanding of magnetic field emergence in these stars, and the impact on the exoplanet atmospheres: A planet that orbits in the equatorial plane of its host may be spared from the destructive effects of these poleward emitting flares. AU Mic is an early M dwarf, and the most actively flaring planet host detected to date. Its innermost companion, AU Mic b is one of the most promising targets for a first observation of flaring star-planet interactions. In these interactions, the planet influences the star, as opposed to space weather, where the planet is always on the receiving side. The effect reflects the properties of the magnetosphere shared by planet and star, as well as the so far inaccessible magnetic properties of planets. In the about 50 days of TESS monitoring data of AU Mic, I searched for statistically robust signs of flaring interactions with AU Mic b as flares that occur in surplus of the star's intrinsic activity. I found the strongest yet still marginal signal in recurring excess flaring in phase with the orbital period of AU Mic b. If it reflects true signal, I estimate that extending the observing time by a factor of 2-3 will yield a statistically significant detection. Well within the reach of future TESS observations, this additional data may bring us closer to robustly detecting this effect than we have ever been. This thesis demonstrates the immense scientific value of space based, long baseline flare monitoring, and the versatility of flares as a carrier of information about the magnetism of star-planet systems. Many discoveries still lay in wait in the vast archives that Kepler and TESS have produced over the years. Flares are intense spotlights into the magnetic structures in star-planet systems that are otherwise far below our resolution limits. The ongoing TESS mission, and soon PLATO, will further open the door to in-depth understanding of small and dynamic scale magnetic fields on low mass stars, and the space weather environment they effect.},
  language  = {en}
}
@phdthesis{Nayak2022,
  author    = {Nayak, Abani Shankar},
  title     = {Design, Characterization and On-sky Testing of an Integrated Optics Device for Stellar Interferometry: from Pupil Remappers to Discrete Beam Combiner},
  doi       = {10.25932/publishup-55874},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-558743},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xl, 175},
  year      = {2022},
  abstract  = {Stellar interferometry is the only method in observational astronomy for obtaining the highest resolution images of astronomical targets. This method is based on combining light from two or more separate telescopes to obtain the complex visibility that contains information about the brightness distribution of an astronomical source. The applications of stellar interferometry have made significant contributions in the exciting research areas of astronomy and astrophysics, including the precise measurement of stellar diameters, imaging of stellar surfaces, observations of circumstellar disks around young stellar objects, predictions of Einstein's General relativity at the galactic center, and the direct search for exoplanets to name a few. One important related technique is aperture masking interferometry, pioneered in the 1960s, which uses a mask with holes at the re-imaged pupil of the telescope, where the light from the holes is combined using the principle of stellar interferometry. While this can increase the resolution, it comes with a disadvantage. Due to the finite size of the holes, the majority of the starlight (typically > 80 \%) is lost at the mask, thus limiting the signal-to-noise ratio (SNR) of the output images. This restriction of aperture masking only to the bright targets can be avoided using pupil remapping interferometry - a technique combining aperture masking interferometry and advances in photonic technologies using single-mode fibers. Due to the inherent spatial filtering properties, the single-mode fibers can be placed at the focal plane of the re-imaged pupil, allowing the utilization of the whole pupil of the telescope to produce a high-dynamic range along with high-resolution images. Thus, pupil remapping interferometry is one of the most promising application areas in the emerging field of astrophotonics. At the heart of an interferometric facility, a beam combiner exists whose primary function is to combine light to obtain high-contrast fringes. A beam combiner can be as simple as a beam splitter or an anamorphic lens to combine light from 2 apertures (or telescopes) or as complex as a cascade of beam splitters and lenses to combine light for > 2 apertures. However, with the field of astrophotonics, interferometric facilities across the globe are increasingly employing some form of photonics technologies by using single-mode fibers or integrated optics (IO) chips as an efficient way to combine light from several apertures. The state-of-the-art instrument - GRAVITY at the very large telescope interferometer (VLTI) facility uses an IO-based beam combiner device reaching visibilities accuracy of better than < 0.25 \%, which is roughly 50× as precise as a few decades back. Therefore, in the context of IO-based components for applications in stellar interferometry, this Thesis describes the work towards the development of a 3-dimensional (3-D) IO device - a monolithic astrophotonics component containing both the pupil remappers and a discrete beam combiner (DBC). In this work, the pupil remappers are 3-D single-mode waveguides in a glass substrate collecting light from the re-imaged pupil of the telescope and feeding the light to a DBC, where the combination takes place. The DBC is a lattice of 3-D single-mode waveguides, which interact through evanescent coupling. By observing the output power of single-mode waveguides of the DBC, the visibilities are retrieved by using a calibrated transfer matrix ({U}) of the device. The feasibility of the DBC in retrieving the visibilities theoretically and experimentally had already been studied in the literature but was only limited to laboratory tests with monochromatic light sources. Thus, a part of this work extends these studies by investigating the response of a 4-input DBC to a broad-band light source. Hence, the objectives of this Thesis are the following: 1) Design an IO device for broad-band light operation such that accurate and precise visibilities could be retrieved experimentally at astronomical H-band (1.5-1.65 μm), and 2) Validation of the DBC as a possible beam combination scheme for future interferometric facilities through on-sky testing at the William Herschel Telescope (WHT). This work consisted of designing three different 3-D IO devices. One of the popular methods for fabricating 3-D photonic components in a glass substrate is ultra-fast laser inscription (ULI). Thus, manufacturing of the designed devices was outsourced to Politecnico di Milano as part of an iterative fabrication process using their state-of-the-art ULI facility. The devices were then characterized using a 2-beam Michelson interferometric setup obtaining both the monochromatic and polychromatic visibilities. The retrieved visibilities for all devices were in good agreement as predicted by the simulation results of a DBC, which confirms both the repeatability of the ULI process and the stability of the Michelson setup, thus fulfilling the first objective. The best-performing device was then selected for the pupil-remapping of the WHT using a different optical setup consisting of a deformable mirror and a microlens array. The device successfully collected stellar photons from Vega and Altair. The visibilities were retrieved using a previously calibrated {U} but showed significant deviations from the expected results. Based on the analysis of comparable simulations, it was found that such deviations were primarily caused by the limited SNR of the stellar observations, thus constituting a first step towards the fulfillment of the second objective.},
  language  = {en}
}
@phdthesis{Diab2021,
  author    = {Diab, Momen},
  title     = {Enabling astrophotonics: adaptive optics and photonic lanterns for coupling starlight into the single-mode regime},
  doi       = {10.25932/publishup-53901},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-539012},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 177},
  year      = {2021},
  abstract  = {Ground-based astronomy is set to employ next-generation telescopes with apertures larger than 25 m in diameter before this decade is out. Such giant telescopes observe their targets through a larger patch of turbulent atmosphere, demanding that most of the instruments behind them must also grow larger to make full use of the collected stellar flux. This linear scaling in size greatly complicates the design of astronomical instrumentation, inflating their cost quadratically. Adaptive optics (AO) is one approach to circumvent this scaling law, but it can only be done to an extent before the cost of the corrective system itself overwhelms that of the instrument or even that of the telescope. One promising technique for miniaturizing the instruments and thus driving down their cost is to replace some, or all, of the free space bulk optics in the optical train with integrated photonic components. Photonic devices, however, do their work primarily in single-mode waveguides, and the atmospherically-distorted starlight must first be efficiently coupled into them if they are to outperform their bulk optic counterparts. This is doable by two means: AO systems can again help control the angular size and motion of seeing disks to the point where they will couple efficiently into astrophotonic components, but this is only feasible for the brightest of objects and over limited fields of view. Alternatively, tapered fiber devices known as photonic lanterns — with their ability to convert multimode into single-mode optical fields — can be used to feed speckle patterns into single-mode integrated optics. They, nonetheless, must conserve the degrees of freedom, and the number of output waveguides will quickly grow out of control for uncorrected large telescopes. An AO-assisted photonic lantern fed by a partially corrected wavefront presents a compromise that can have a manageable size if the trade-off between the two methods is chosen carefully. This requires end-to-end simulations that take into account all the subsystems upstream of the astrophotonic instrument, i.e., the atmospheric layers, the telescope, the AO system, and the photonic lantern, before a decision can be made on sizing the multiplexed integrated instrument. The numerical models that simulate atmospheric turbulence and AO correction are presented in this work. The physics and models for optical fibers, arrays of waveguides, and photonic lanterns are also provided. The models are on their own useful in understanding the behavior of the individual subsystems involved and are also used together to compute the optimum sizing of photonic lanterns for feeding astrophotonic instruments. Additionally, since photonic lanterns are a relatively new concept, two novel applications are discussed for them later in this thesis: the use of mode-selective photonic lanterns (MSPLs) to reduce the multiplicity of multiplexed integrated instruments and the combination of photonic lanterns with discrete beam combiners (DBCs) to retrieve the modal content in an optical waveguide.},
  language  = {en}
}