@article{GrottKnollenbergHammetal.2019, author = {Grott, Matthias and Knollenberg, J. and Hamm, M. and Ogawa, K. and Jaumann, R. and Otto, Katharina Alexandra and Delbo, M. and Michel, Patrick and Biele, J. and Neumann, Wladimir and Knapmeyer, Martin and K{\"u}hrt, E. and Senshu, H. and Okada, T. and Helbert, Jorn and Maturilli, A. and M{\"u}ller, N. and Hagermann, A. and Sakatani, Naoya and Tanaka, S. and Arai, T. and Mottola, Stefano and Tachibana, Shogo and Pelivan, Ivanka and Drube, Line and Vincent, J-B and Yano, Hajime and Pilorget, C. and Matz, K. D. and Schmitz, N. and Koncz, A. and Schr{\"o}der, Stefan E. and Trauthan, F. and Schlotterer, Markus and Krause, C. and Ho, T-M and Moussi-Soffys, A.}, title = {Low thermal conductivity boulder with high porosity identified on C-type asteroid (162173) Ryugu}, series = {Nature astronomy}, volume = {3}, journal = {Nature astronomy}, number = {11}, publisher = {Nature Publishing Group}, address = {London}, issn = {2397-3366}, doi = {10.1038/s41550-019-0832-x}, pages = {971 -- 976}, year = {2019}, abstract = {C-type asteroids are among the most pristine objects in the Solar System, but little is known about their interior structure and surface properties. Telescopic thermal infrared observations have so far been interpreted in terms of a regolith-covered surface with low thermal conductivity and particle sizes in the centimetre range. This includes observations of C-type asteroid (162173) Ryugu1,2,3. However, on arrival of the Hayabusa2 spacecraft at Ryugu, a regolith cover of sand- to pebble-sized particles was found to be absent4,5 (R.J. et al., manuscript in preparation). Rather, the surface is largely covered by cobbles and boulders, seemingly incompatible with the remote-sensing infrared observations. Here we report on in situ thermal infrared observations of a boulder on the C-type asteroid Ryugu. We found that the boulder's thermal inertia was much lower than anticipated based on laboratory measurements of meteorites, and that a surface covered by such low-conductivity boulders would be consistent with remote-sensing observations. Our results furthermore indicate high boulder porosities as well as a low tensile strength in the few hundred kilopascal range. The predicted low tensile strength confirms the suspected observational bias6 in our meteorite collections, as such asteroidal material would be too frail to survive atmospheric entry7}, language = {en} } @article{GrottKnollenbergHammetal.2019, author = {Grott, Matthias and Knollenberg, J. and Hamm, M. and Ogawa, K. and Jaumann, R. and Otto, Katharina Alexandra and Delbo, M. and Michel, P. and Biele, J. and Neumann, W. and Knapmeyer, M. and Kuehrt, E. and Senshu, H. and Okada, T. and Helbert, J. and Maturilli, A. and M{\"u}ller, N. and Hagermann, A. and Sakatani, N. and Tanaka, S. and Arai, T. and Mottola, S. and Tachibana, S. and Pelivan, Ivanka and Drube, L. and Vincent, J-B and Yano, H. and Pilorget, C. and Matz, K. D. and Schmitz, N. and Koncz, A. and Schr{\"o}der, S. E. and Trauthan, F. and Schlotterer, M. and Krause, C. and Ho, T-M and Moussi-Soffys, A.}, title = {Low thermal conductivity boulder with high porosity identified on C-type asteroid (162173) Ryugu}, series = {Nature astronomy}, volume = {3}, journal = {Nature astronomy}, number = {11}, publisher = {Nature Publishing Group}, address = {London}, issn = {2397-3366}, doi = {10.1038/s41550-019-0832-x}, pages = {971 -- 976}, year = {2019}, abstract = {C-type asteroids are among the most pristine objects in the Solar System, but little is known about their interior structure and surface properties. Telescopic thermal infrared observations have so far been interpreted in terms of a regolith-covered surface with low thermal conductivity and particle sizes in the centimetre range. This includes observations of C-type asteroid (162173) Ryugu1,2,3. However, on arrival of the Hayabusa2 spacecraft at Ryugu, a regolith cover of sand- to pebble-sized particles was found to be absent4,5 (R.J. et al., manuscript in preparation). Rather, the surface is largely covered by cobbles and boulders, seemingly incompatible with the remote-sensing infrared observations. Here we report on in situ thermal infrared observations of a boulder on the C-type asteroid Ryugu. We found that the boulder's thermal inertia was much lower than anticipated based on laboratory measurements of meteorites, and that a surface covered by such low-conductivity boulders would be consistent with remote-sensing observations. Our results furthermore indicate high boulder porosities as well as a low tensile strength in the few hundred kilopascal range. The predicted low tensile strength confirms the suspected observational bias6 in our meteorite collections, as such asteroidal material would be too frail to survive atmospheric entry7.}, language = {en} } @phdthesis{Otto2015, author = {Otto, Katharina Alexandra}, title = {Mass wasting and the Coriolis effect on asteroid Vesta}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87390}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 251}, year = {2015}, abstract = {This work investigates the influence of the Coriolis force on mass motion related to the Rheasilvia impact basin on asteroid (4) Vesta's southern hemisphere. The giant basin is 500km in diameter, with a centre which nearly coincides with the rotation axis of Vesta. The Rheasilvia basin partially overlaps an earlier, similarly large impact basin, Veneneia. Mass motion within and in the vicinity of the Rheasilvia basin includes slumping and landslides, which, primarily due to their small linear extents, have not been noticeably affected by the Coriolis force. However, a series of ridges related to the basin exhibit significant curvature, which may record the effect of the Coriolis force on the mass motion which generated them. In this thesis 32 of these curved ridges, in three geologically distinct regions, were examined. The mass motion velocities from which the ridge curvatures may have resulted during the crater modification stage were investigated. Velocity profiles were derived by fitting inertial circles along the curved ridges and considering both the current and past rotation states of Vesta. An iterative, statistical approach was used, whereby the radii of inertial circles were obtained through repeated fitting to triplets of points across the ridges. The most frequently found radius for each central point was then used for velocity derivation at that point. The results of the velocity analysis are strongly supportive of a Coriolis force origin for the curved ridges. Derived velocities (29.6 ± 24.6 m/s) generally agree well with previously published predictions from numerical simulations of mass motion during the impact process. Topographical features such as local slope gradient and mass deposition regions on the curved ridges also independently agree with regions in which the calculated mass motion accelerates or decelerates. Sections of constant acceleration, deceleration and constant velocity are found, showing that mass motion is being governed by varying conditions of topography, regolith structure and friction. Estimates of material properties such as the effective viscosities (1.9-9.0·10⁶ Pa·s) and coefficients of friction (0.02-0.81) are derived from the velocity profile information in these sections. From measured accelerations of mass motions on the crater wall, it is also shown that the crater walls must have been locally steeper at the time of the mass motion. Together with these novel insights into the state and behaviour of material moving during the modification stage of Rheasilvia's formation, this work represents the first time that the Coriolis Effect on mass motions during crater formation has been shown to result in diagnostic features preserved until today.}, language = {en} } @article{OttoJaumannKrohnetal.2016, author = {Otto, Katharina Alexandra and Jaumann, R. and Krohn, K. and Spahn, Frank and Raymond, C. A. and Russell, C. T.}, title = {The Coriolis effect on mass wasting during the Rheasilvia impact on asteroid Vesta}, series = {Geophysical research letters}, volume = {43}, journal = {Geophysical research letters}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1002/2016GL071539}, pages = {12340 -- 12347}, year = {2016}, abstract = {We investigate the influence of the Coriolis force on mass motion related to the Rheasilvia impact on asteroid Vesta. Observations by the NASA Dawn mission revealed a pattern of curved radial ridges, which are related to Coriolis-deflected mass-wasting during the initial modification stage of the crater. Utilizing the projected curvature of the mass-wasting trajectories, we developed a method that enabled investigation of the initial mass wasting of the Rheasilvia impact by observational means. We demonstrate that the Coriolis force can strongly affect the crater formation processes on rapidly rotating objects, and we derive the material's velocities (28.9 ± 22.5 m/s), viscosities (1.5-9.0 × 106 Pa s) and coefficients of friction (0.02-0.81) during the impact modification stage. The duration of the impact modification stage could be estimated to (1.1 ± 0.5) h. By analyzing the velocity distribution with respect to the topography, we deduce that the Rheasilvia impactor hit a heterogeneous target and that the initial crater walls were significantly steeper during the modification stage.}, language = {en} }