@article{EisoldKupstatKlieretal.2014, author = {Eisold, Ursula and Kupstat, Annette and Klier, Dennis Tobias and Primus, Philipp-A. and Pschenitza, Michael and Niessner, Reinhard and Knopp, Dietmar and Kumke, Michael Uwe}, title = {Probing the physicochemical interactions of 3-hydroxy-benzo[a]pyrene with different monoclonal and recombinant antibodies by use of fluorescence line-narrowing spectroscopy}, series = {Analytical \& bioanalytical chemistry}, volume = {406}, journal = {Analytical \& bioanalytical chemistry}, number = {14}, publisher = {Springer}, address = {Heidelberg}, issn = {1618-2642}, doi = {10.1007/s00216-013-7584-8}, pages = {3387 -- 3394}, year = {2014}, abstract = {Characterization of interactions between antigens and antibodies is of utmost importance both for fundamental understanding of the binding and for development of advanced clinical diagnostics. Here, fluorescence line-narrowing (FLN) spectroscopy was used to study physicochemical interactions between 3-hydroxybenzo[a]pyrene (3OH-BaP, as antigen) and a variety of solvent matrices (as model systems) or anti-polycyclic aromatic hydrocarbon antibodies (anti-PAH). We focused the studies on the specific physicochemical interactions between 3OH-BaP and different, previously obtained, monoclonal and recombinant anti-PAH antibodies. Control experiments performed with non-binding monoclonal antibodies and bovine serum albumin (BSA) indicated that nonspecific interactions did not affect the FLN spectrum of 3OH-BaP. The spectral positions and relative intensities of the bands in the FLN spectra are highly dependent on the molecular environment of the 3OH-BaP. The FLN bands correlate with different vibrational modes of 3OH-BaP which are affected by interactions with the molecular environment (pi-pi interactions, H-bonding, or van-der-Waals forces). Although the analyte (3OH-BaP) was the same for all the antibodies investigated, different binding interactions could be identified from the FLN spectra on the basis of structural flexibility and conformational multiplicity of the antibodies' paratopes.}, language = {en} } @article{EisoldSellrieMemczaketal.2018, author = {Eisold, Ursula and Sellrie, Frank and Memczak, Henry and Andersson, Anika and Schenk, J{\"o}rg A. and Kumke, Michael Uwe}, title = {Dye tool box for a fluorescence enhancement immunoassay}, series = {Bioconjugate chemistry}, volume = {29}, journal = {Bioconjugate chemistry}, number = {1}, publisher = {American Chemical Society}, address = {Washington}, issn = {1043-1802}, doi = {10.1021/acs.bioconjchem.7b00731}, pages = {203 -- 214}, year = {2018}, abstract = {Immunochemical analytical methods are very successful in clinical diagnostics and are nowadays also emerging in the control of food as well as monitoring of environmental issues. Among the different immunoassays, luminescence based formats are characterized by their outstanding sensitivity making this format especially attractive for future applications. The need for multiparameter detection capabilities calls for a tool box of dye labels in order to transduce the biochemical reaction into an optically detectable signal. Here, in a multiparameter approach each analyte may be detected by a different dye with a unique emission color (covering the blue to red spectral range) or a unique luminescence decay kinetics. In the case of a competitive immunoassay format for each of the different dye labels an individual antibody would be needed. In the present paper a slightly modified approach is presented using a 7-aminocoumarin unit as the basic antigen against which highly specific antibodies were generated. Leaving the epitope region in the dyes unchanged but introducing a side group in positon 3 of the coumarin system allowed us to tune the optical properties of the coumarin dyes without the necessity of new antibody generation. Upon modification of the parent coumarin unit the full spectral range from blue to deep red was accessed. In the manuscript the photophysical characterization of the coumarin derivatives and their corresponding immunocomplexes with two highly specific antibodies is presented. The coumarin dyes and their immunocomplexes were characterized by steady-state and time-resolved absorption as well as emission spectroscopy. Moreover, fluorescence depolarization measurements were carried out to complement the data stressing the different binding modes of the two antibodies. The binding modes were evaluated using the photophysics of 7-aminocoumarins and how it was affected in the respective immunocomplexes, namely, the formation of the intramolecular charge transfer (ICT) as well as the twisted intramolecular charge transfer (TICT). In contrast to other antibody-dye pairs reported a distinct fluorescence enhancement upon formation of the antibody-dye complex up to a factor of SO was found. Because of the easy emission color tuning by tailoring the coumarin substitution for the antigen binding in nonrelevant position 3 of the parent molecule, a dye tool box is on hand which can be used in the construction of competitive multiparameter fluorescence enhancement immunoassays (FenIA).}, language = {en} } @article{EisoldSellrieSchenketal.2015, author = {Eisold, Ursula and Sellrie, Frank and Schenk, J{\"o}rg A. and Lenz, Christine and St{\"o}cklein, Walter F. M. and Kumke, Michael Uwe}, title = {Bright or dark immune complexes of anti-TAMRA antibodies for adapted fluorescence-based bioanalysis}, series = {Analytical \& bioanalytical chemistry}, volume = {407}, journal = {Analytical \& bioanalytical chemistry}, number = {12}, publisher = {Springer}, address = {Heidelberg}, issn = {1618-2642}, doi = {10.1007/s00216-015-8538-0}, pages = {3313 -- 3323}, year = {2015}, abstract = {Fluorescence labels, for example fluorescein or rhodamin derivatives, are widely used in bioanalysis applications including lateral-flow assays, PCR, and fluorescence microscopy. Depending on the layout of the particular application, fluorescence quenching or enhancement may be desired as the detection principle. Especially for multiplexed applications or high-brightness requirements, a tunable fluorescence probe can be beneficial. The alterations in the photophysics of rhodamine derivatives upon binding to two different anti-TAMRA antibodies were investigated by absorption and fluorescence-spectroscopy techniques, especially determining the fluorescence decay time and steady-state and time-resolved fluorescence anisotropy. Two monoclonal anti-TAMRA antibodies were generated by the hybridoma technique. Although surface-plasmon-resonance measurements clearly proved the high affinity of both antibodies towards 5-TAMRA, the observed effects on the fluorescence of rhodamine derivatives were very different. Depending on the anti-TAMRA antibody either a strong fluorescence quenching (G71-DC7) or a distinct fluorescence enhancement (G71-BE11) upon formation of the immune complex was observed. Additional rhodamine derivatives were used to gain further information on the binding interaction. The data reveal that such haptens as 5-TAMRA could generate different paratopes with equal binding affinities but different binding interactions, which provide the opportunity to adapt bioanalysis methods including immunoassays for optimized detection principles for the same hapten depending on the specific requirements.}, language = {en} } @misc{EngelhardKumkeLoehmannsroeben2006, author = {Engelhard, Sonja and Kumke, Michael Uwe and L{\"o}hmannsr{\"o}ben, Hans-Gerd}, title = {OPQS - optical process and quality sensing : exemplary applications in the beerbrewing and polyurethane foaming processes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12191}, year = {2006}, abstract = {Optical methods play an important role in process analytical technologies (PAT). Four examples of optical process and quality sensing (OPQS) are presented, which are based on three important experimental techniques: near-infrared absorption, luminescence quenching, and a novel method, photon density wave (PDW) spectroscopy. These are used to evaluate four process and quality parameters related to beer brewing and polyurethane (PU) foaming processes: the ethanol content and the oxygen (O2) content in beer, the biomass in a bioreactor, and the cellular structures of PU foam produced in a pilot production plant.}, language = {en} } @article{EngelhardKumkeLoehmannsroeben2006, author = {Engelhard, Sonja and Kumke, Michael Uwe and L{\"o}hmannsr{\"o}ben, Hans-Gerd}, title = {Examples of the application of optical process and quality sensing (OPQS) to beer brewing and polyurethane foaming processes}, issn = {1618-2642}, doi = {10.1007/s00216-005-3364-4}, year = {2006}, abstract = {Optical methods play an important role in process analytical technologies (PAT). Four examples of optical process and quality sensing (OPQS) are presented, which are based on three important experimental techniques: near- infrared absorption, luminescence quenching, and a novel method, photon density wave (PDW) spectroscopy. These are used to evaluate four process and quality parameters related to beer brewing and polyurethane (PU) foaming processes: the ethanol content and the oxygen (O-2) content in beer, the biomass in a bioreactor, and the cellular structures of PU foam produced in a pilot production plant}, language = {en} } @misc{FrimmelKumke1998, author = {Frimmel, Fritz Hartmann and Kumke, Michael Uwe}, title = {Optische Parameter zur Stoffcharakterisierung vom Trinkwasser bis zum Abwasser}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13088}, year = {1998}, abstract = {Die Anwendung von optischen Parametern zur Stoffcharakterisierung wird diskutiert. Dabei ist der Schwerpunkt der Diskussion auf absorptions- und fluoreszenzspektroskopische Methoden gesetzt. Beide Methoden k{\"o}nnen schnell und zuverl{\"a}ssig - auch im on-line Betrieb - eingesetzt werden. Der Beitrag soll einen {\"U}berblick {\"u}ber die grundlegenden M{\"o}glichkeiten der Anwendung beider Methoden geben.}, language = {de} } @article{GehneFlehrKienzleretal.2012, author = {Gehne, S{\"o}ren and Flehr, Roman and Kienzler, Andrea Altevogt Nee and Berg, Maik and Bannwarth, Willi and Kumke, Michael Uwe}, title = {Dye dynamics in three-color FRET samples}, series = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, volume = {116}, journal = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, number = {35}, publisher = {American Chemical Society}, address = {Washington}, issn = {1520-6106}, doi = {10.1021/jp3064273}, pages = {10798 -- 10806}, year = {2012}, abstract = {Time-resolved emission data (fluorescence decay and fluorescence depolarization) of two three-color Forster resonance energy transfer (tc-FRET) systems consisting of a carbostyril donor (D), a ruthenium complex (Ru) as relay dye, and a Cy5 derivative (Cy) or, optionally, an anthraquinone quencher (Q) were carefully analyzed using advanced distribution analysis models. Thereby, it is possible to get information on the flexibility and mobility of the chromophores which are bound to double stranded (ds) DNA. Especially the distance distribution based on the analysis of the fluorescence depolarization is an attractive approach to complement data of fluorescence decay time analysis. The distance distributions extracted from the experimental data were in excellent agreement with those determined from accessible volume (AV) simulations. Moreover, the study showed that for tc-FRET systems the combination of dyes emitting on different time scales (e.g., nanoseconds vs microseconds) is highly beneficial in the distribution analysis of time-resolved luminescence data in cases where macromolecules such as DNA are involved. Here, the short lifetimes can yield information on the rotation of the dye molecule itself and the long lifetime can give insight in the overall dynamics of the macromolecule.}, language = {en} } @article{GehneSydowDatheetal.2013, author = {Gehne, S{\"o}ren and Sydow, Karl and Dathe, Margitta and Kumke, Michael Uwe}, title = {Characterization of cell-penetrating lipopeptide micelles by spectroscopic methods}, series = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, volume = {117}, journal = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, number = {46}, publisher = {American Chemical Society}, address = {Washington}, issn = {1520-6106}, doi = {10.1021/jp406053g}, pages = {14215 -- 14225}, year = {2013}, abstract = {The transport of bioactive compounds to the site of action is a great challenge. A promising approach to overcome application-related problems is the development of targeting colloidal transport systems, such as micelles which are equipped with uptake mediating moieties. Here, we investigated a set of novel lipopeptides which exhibit a surfactant-like structure due to attachment of two palmitoyl chains to the Nterminus of cationic or anionic amino acid sequences. We analyzed the association behavior of these lipopeptides by using 5(6)-carboxyfluorescein (CF)-labeled derivatives as a fluorescent probe and different spectroscopic methods such as fluorescence anisotropy and fluorescence correlation spectroscopy (FCS). The photophysical properties as well as the diffusion and rotational movements of the CF-labeled lipopeptides were exploited to determine the cmc and the size of the micelles consisting of lipopeptides. We could distinguish cationic and anionic lipopeptides by their association behavior and by studying the interactions with mouse brain capillary endothelial cells (b.end3). The cationic derivatives turned out to be very strong surfactants with a very low cmc in the micromolar range (0.5-14 mu M). The unique combination of micelle-forming property and cell-penetrating ability can pave the road for the development of a novel class of efficient drug carrier systems.}, language = {en} } @article{GrunzelPilarekSteinbruecketal.2014, author = {Grunzel, Petra and Pilarek, Maciej and Steinbrueck, Doerte and Neubauer, Antje and Brand, Eva and Kumke, Michael Uwe and Neubauer, Peter and Krause, Mirja}, title = {Mini-scale cultivation method enables expeditious plasmid production in Escherichia coli}, series = {Biotechnology journal : systems \& synthetic biology, nanobiotech, medicine}, volume = {9}, journal = {Biotechnology journal : systems \& synthetic biology, nanobiotech, medicine}, number = {1}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1860-6768}, doi = {10.1002/biot.201300177}, pages = {128 -- 136}, year = {2014}, abstract = {The standard procedure in the lab for plasmid isolation usually involves a 2-mL, 16 h over-night cultivation in 15-mL bioreaction tubes in LB medium. This is time consuming, and not suitable for high-throughput applications. This study shows that it is possible to produce plasmid DNA (pDNA) in a 1.5-mL microcentrifuge tube with only 100 L cultivation volume in less than 7 h with a simple protocol. Compared with the standard LB cultivation for pDNA production reaching a final pDNA concentration range of 1.5-4 mu g mL(-1), a 6- to 10-fold increase in plasmid concentration (from 10 up to 25 mu g mL(-1) cultivation volume) is achieved using an optimized medium with an internal substrate delivery system (EnBase (R)). Different strains, plasmids, and the applicability of different inoculation tools (i.e. different starting ODs) were compared, demonstrating the robustness of the system. Additionally, dissolved oxygen was monitored in real time online, indicating that under optimized conditions oxygen limitation can be avoided. We developed a simple protocol with a significantly decreased procedure time, enabling simultaneous handling of more samples, while a consistent quality and a higher final pDNA concentration are ensured.}, language = {en} } @article{HaubitzDrobotTsushimaetal.2021, author = {Haubitz, Toni and Drobot, Bj{\"o}rn and Tsushima, Satoru and Steudtner, Robin and Stumpf, Thorsten and Kumke, Michael Uwe}, title = {Quenching mechanism of uranyl(VI) by chloride and bromide in aqueous and non-aqueous solutions}, series = {The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment \& general theory}, volume = {125}, journal = {The journal of physical chemistry : A, Molecules, spectroscopy, kinetics, environment \& general theory}, number = {20}, publisher = {American Chemical Society}, address = {Washington}, issn = {1089-5639}, doi = {10.1021/acs.jpca.1c02487}, pages = {4380 -- 4389}, year = {2021}, abstract = {A major hindrance in utilizing uranyl(VI) luminescence as a standard analytical tool, for example, in environmental monitoring or nuclear industries, is quenching by other ions such as halide ions, which are present in many relevant matrices of uranyl(VI) speciation. Here, we demonstrate through a combination of time-resolved laser-induced fluorescence spectroscopy, transient absorption spectroscopy, and quantum chemistry that coordinating solvent molecules play a crucial role in U(VI) halide luminescence quenching. We show that our previously suggested quenching mechanism based on an internal redox reaction of the 1:2-uranyl-halide-complex holds also true for bromide-induced quenching of uranyl(VI). By adopting specific organic solvents, we were able to suppress the separation of the oxidized halide ligand X-2(center dot-) and the formed uranyl(V) into fully solvated ions, thereby "reigniting" U(VI) luminescence. Time-dependent density functional theory calculations show that quenching occurs through the outer-sphere complex of U(VI) and halide in water, while the ligand-to-metal charge transfer is strongly reduced in acetonitrile.}, language = {en} }