@article{DebatinMoellmerMondaletal.2012,
  author    = {Debatin, Franziska and M{\"o}llmer, Jens and Mondal, Suvendu Sekhar and Behrens, Karsten and M{\"o}ller, Andreas and Staudt, Reiner and Thomas, Arne and Holdt, Hans-J{\"u}rgen},
  title     = {Mixed gas adsorption of carbon dioxide and methane on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates},
  series = {Journal of materials chemistry},
  volume    = {22},
  journal   = {Journal of materials chemistry},
  number    = {20},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {0959-9428},
  doi       = {10.1039/c2jm15811f},
  pages     = {10221 -- 10227},
  year      = {2012},
  abstract  = {In this work the adsorption of CO2 and CH4 on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates, IFP-1-IFP-6 (IFP Imidazolate Framework Potsdam), is studied firstly by pure gas adsorption at 273 K. All experimental isotherms can be nicely described by using the Toth isotherm model and show the preferred adsorption of CO2 over CH4. At low pressures the Toth isotherm equation exhibits a Henry region, wherefore Henry's law constants for CO2 and CH4 uptake could be determined and ideal selectivity (alpha CO2/CH4) has been calculated. Secondly, selectivities were calculated from mixture data by using nearly equimolar binary mixtures of both gases by a volumetric-chromatographic method to examine the IFPs. Results showed the reliability of the selectivity calculation. Values of (alpha CO2/CH4) around 7.5 for IFP-5 indicate that this material shows much better selectivities than IFP-1, IFP-2, IFP-3, IFP-4 and IFP-6 with slightly lower selectivity (alpha CO2/CH4) = 4-6. The preferred adsorption of CO2 over CH4 especially of IFP-5 and IFP-4 makes these materials suitable for gas separation application.},
  language  = {en}
}
@article{DebatinBehrensWeberetal.2012,
  author    = {Debatin, Franziska and Behrens, Karsten and Weber, Jens and Baburin, Igor A. and Thomas, Arne and Schmidt, Johannes and Senkovska, Irena and Kaskel, Stefan and Kelling, Alexandra and Hedin, Niklas and Bacsik, Zoltan and Leoni, Stefano and Seifert, Gotthard and J{\"a}ger, Christian and G{\"u}nter, Christina and Schilde, Uwe and Friedrich, Alwin and Holdt, Hans-J{\"u}rgen},
  title     = {An isoreticular family of microporous metal-organic frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate Syntheses, structures and properties},
  series = {Chemistry - a European journal},
  volume    = {18},
  journal   = {Chemistry - a European journal},
  number    = {37},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201200889},
  pages     = {11630 -- 11640},
  year      = {2012},
  abstract  = {We report on a new series of isoreticular frameworks based on zinc and 2-substituted imidazolate-4-amide-5-imidate (IFP-14, IFP=imidazolate framework Potsdam) that form one-dimensional, microporous hexagonal channels. Varying R in the 2-substitued linker (R=Me (IFP-1), Cl (IFP-2), Br (IFP-3), Et (IFP-4)) allowed the channel diameter (4.01.7 angstrom), the polarisability and functionality of the channel walls to be tuned. Frameworks IFP-2, IFP-3 and IFP-4 are isostructural to previously reported IFP-1. The structures of IFP-2 and IFP-3 were solved by X-ray crystallographic analyses. The structure of IFP-4 was determined by a combination of PXRD and structure modelling and was confirmed by IR spectroscopy and 1H MAS and 13C CP-MAS NMR spectroscopy. All IFPs showed high thermal stability (345400?degrees C); IFP-1 and IFP-4 were stable in boiling water for 7 d. A detailed porosity analysis was performed on the basis of adsorption measurements by using various gases. The potential of the materials to undergo specific interactions with CO2 was investigated by measuring the isosteric heats of adsorption. The capacity to adsorb CH4 (at 298 K), CO2 (at 298 K) and H2 (at 77 K) at high pressure were also investigated. In situ IR spectroscopy showed that CO2 is physisorbed on IFP-14 under dry conditions and that both CO2 and H2O are physisorbed on IFP-1 under moist conditions.},
  language  = {en}
}
@misc{MondalBehrensMatthesetal.2014,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Matthes, Philipp R. and Sch{\"o}nfeld, Fabian and Nitsch, J{\"o}rn and Steffen, Andreas and Primus, Philipp-Alexander and Kumke, Michael Uwe and M{\"u}ller-Buschbaum, Klaus and Holdt, Hans-J{\"u}rgen},
  title     = {White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-79953},
  pages     = {4623 -- 4631},
  year      = {2014},
  abstract  = {Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a-d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.},
  language  = {en}
}
@article{MondalBehrensMatthesetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Matthes, Philipp R. and Sch{\"o}nfeld, Fabian and Nitsch, J{\"o}rn and Steffen, Andreas and Primus, Philipp-Alexander and Kumke, Michael Uwe and M{\"u}ller-Buschbaum, Klaus and Holdt, Hans-J{\"u}rgen},
  title     = {White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+},
  series = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  volume    = {18},
  journal   = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  number    = {3},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2050-7534},
  doi       = {10.1039/C4TC02919D},
  pages     = {4623 -- 4631},
  year      = {2015},
  abstract  = {Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a-d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.},
  language  = {en}
}
@article{MondalBehrensMatthesetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Matthes, Philipp R. and Sch{\"o}nfeld, Fabian and Nitsch, J{\"o}rn and Steffen, Andreas and Primus, Philipp-Alexander and Kumke, Michael Uwe and M{\"u}ller-Buschbaum, Klaus and Holdt, Hans-J{\"u}rgen},
  title     = {White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+},
  series = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  volume    = {3},
  journal   = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  number    = {18},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2050-7526},
  doi       = {10.1039/c4tc02919d},
  pages     = {4623 -- 4631},
  year      = {2015},
  language  = {en}
}
@article{MondalBehrensKellingetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Kelling, Alexandra and Nabein, Hans-Peter and Schilde, Uwe and Holdt, Hans-J{\"u}rgen},
  title     = {Two Cd-II/Co-II-Imidazolate Coordination Polymers: Syntheses, Crystal Structures, Stabilities, and Luminescent/Magnetic Properties},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  volume    = {641},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0044-2313},
  doi       = {10.1002/zaac.201500526},
  pages     = {1991 -- 1997},
  year      = {2015},
  abstract  = {Cadmium(II) based 2D coordination polymer [Cd(L1)(2)(DMF)(2)] (1) (L1 = 4,5-dicyano-2-methylimidazolate, DMF = N,N'-dimethylformamide) and 2D cobalt(II)-imidazolate framework [Co(L3)(4)] (2) (L3 = 4,5-diamide-2-ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction measurement (PXRD) and single-crystal X-ray diffraction. Compound 1 has hexacoordinate Cd-II ions and forms a zigzag chain-like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 degrees C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co-II atom.},
  language  = {en}
}
@article{BehrensMondalNoeskeetal.2015,
  author    = {Behrens, Karsten and Mondal, Suvendu Selchar and N{\"o}ske, Robert and Baburin, Igor A. and Leoni, Stefano and G{\"u}nter, Christina and Weber, Jens and Holdt, Hans-J{\"u}rgen},
  title     = {Microwave-Assisted Synthesis of Defects Metal-Imidazolate-Amide-Imidate Frameworks and Improved CO2 Capture},
  series = {Inorganic chemistry},
  volume    = {54},
  journal   = {Inorganic chemistry},
  number    = {20},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0020-1669},
  doi       = {10.1021/acs.inorgchem.5b01952},
  pages     = {10073 -- 10080},
  year      = {2015},
  abstract  = {In this work, we report three isostructural 3D frameworks, named IFP-11 (R = Cl), IFP-12 (R = Br), and IFP-13 (R = Et) (IFP = Imidazolate Framework Potsdam) based on a cobalt(II) center and the chelating linker 2-substituted imidazolate-4-amide-5-imidate. These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under microwave (MW)-assisted conditions in DMF. Structure determination of these IFPs was investigated by IR spectroscopy and a combination of powder X-ray diffraction (PXRD) with structure modeling. The structural models were initially built up from the single-crystal X-ray structure determination of IFP-5 (a cobalt center and 2-methylimidazolate-4-amide-5-imidate linker based framework) and were optimized by using density functional theory calculations. Substitution on position 2 of the linker (R = Cl, Br, and Et) in the isostructural IFP-11, -12, and -13 allowed variation of the potential pore window in 1D hexagonal channels (3.8 to 1.7 angstrom A). The potential of the materials to undergo specific interactions with CO2 was measured by the isosteric heat adsorption. Further, we resynthesized zinc based IFPs, namely IFP-1 = Me), IFP-2 (R = Cl), IFP-3 (R = Br), and IFP-4 (R = Et), and cobalt based IFP-5 under MW-assisted conditions with higher yield. The transition from a nucleation phase to the pure crystalline material of IFP-1 in MW-assisted synthesis depends on reaction time. IFP-1, -3, and -5, which are synthesized by MW-assisted conditions, showed an enhancement of N-2 and CO2, compared to the analogous conventional electrical (CE) heating method based materials due to crystal defects.},
  language  = {en}
}
@article{TaubertBalischewskiHentrichetal.2016,
  author    = {Taubert, Andreas and Balischewski, Christian and Hentrich, Doreen and Elschner, Thomas and Eidner, Sascha and G{\"u}nter, Christina and Behrens, Karsten and Heinze, Thomas},
  title     = {Water-Soluble Cellulose Derivatives Are Sustainable Additives for Biomimetic Calcium Phosphate Mineralization},
  series = {Inorganics : open access journal},
  volume    = {4},
  journal   = {Inorganics : open access journal},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2304-6740},
  doi       = {10.3390/inorganics4040033},
  pages     = {17},
  year      = {2016},
  abstract  = {The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10\% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials.},
  language  = {en}
}
@article{HovestadtBendtMondaletal.2017,
  author    = {Hovestadt, Maximilian and Bendt, Stephan and Mondal, Suvendu Sekhar and Behrens, Karsten and Reif, Florian and Dopken, Merle and Holdt, Hans-J{\"u}rgen and Keil, Frerich J. and Hartmann, Martin},
  title     = {Experimental and Theoretical Analysis of the Influence of Different Linker Molecules in Imidazolate Frameworks Potsdam (IFP-n) on the Separation of Olefin-Paraffin Mixtures},
  series = {Langmuir},
  volume    = {33},
  journal   = {Langmuir},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0743-7463},
  doi       = {10.1021/acs.langmuir.7b02016},
  pages     = {11170 -- 11179},
  year      = {2017},
  abstract  = {Four metal organic frameworks with similar topology but different chemical environment inside the pore structure, namely, IFP-1, IFP-3, IFP-5, and IFP-7, have been investigated with respect to the separation potential for olefin paraffin mixtures as well as the influence of the different linkers on adsorption properties using experiments and Monte Carlo simulations. All IFP structures show a higher adsorption of ethane compared to ethene with the exception of IFP-7 which shows no selectivity in breakthrough experiments. For propane/propane separation, all adsorbents show a higher adsorption for the olefin. The experimental results agree quite well with the simulated values except for the IFP-7, which is presumably due to the flexibility of the structure. Moreover, the experimental and simulated isotherms were confirmed with breakthrough experiments that render IFP-1, IFP-3, and IFP-5 as suitable for the purification of ethene from ethane.},
  language  = {en}
}
@phdthesis{Behrens2017,
  author    = {Behrens, Karsten},
  title     = {Mikrowellen-assistierte Synthese von IFPs und Darstellung von lumineszierenden Lanthanid-IFP-Materialien},
  school      = {Universit{\"a}t Potsdam},
  pages     = {123, XCI},
  year      = {2017},
  language  = {de}
}