@article{SchulzStillerZetzscheetal.1994, author = {Schulz, Burkhard and Stiller, Burkhard and Zetzsche, Thomas and Knochenhauer, Gerald and Dietel, Reinhard and Brehmer, Ludwig}, title = {Crystal structure of 2,5-Di(4- methoxycarbonyl-phenyl)-1,3,4-oxadiazole characterized by AFM and IR- spectroscopy}, year = {1994}, language = {en} } @article{MercerMcKenzieBrumaetal.1994, author = {Mercer, Frank W. and McKenzie, M. and Bruma, Maria and Schulz, Burkhard}, title = {Synthesis and properties of fluorinated polyimides and fluorinated poly(imide-amide)s containing pendent cyano groups}, year = {1994}, language = {en} } @article{SchulzKnochenhauerBrehmeretal.1994, author = {Schulz, Burkhard and Knochenhauer, Gerald and Brehmer, Ludwig and Janietz, Silvia}, title = {Stuctures and properties of aromatic poly(1,3,4-oxadiazole)s}, year = {1994}, language = {en} } @article{BrumaMercerSchulzetal.1994, author = {Bruma, Maria and Mercer, Frank W. and Schulz, Burkhard and Dietel, Reinhard and Fitch, J. and Cassidy, Peter}, title = {Study of crosslinking process in fluorinated poly(imide-amide)s containing pendant cyano groups}, year = {1994}, language = {en} } @article{BrumaMercerSchulzetal.1994, author = {Bruma, Maria and Mercer, Frank W. and Schulz, Burkhard and Dietel, Reinhard and Fitch, J. and Cassidy, Peter}, title = {Study of crosslinking process in fluorinated poly(imide-amide)s containing pendant cyano groups}, year = {1994}, language = {en} } @article{BrumaMercerSchulzetal.1994, author = {Bruma, Maria and Mercer, Frank W. and Schulz, Burkhard and Dietel, Reinhard and Neumann, Werner}, title = {Fluorinated poly(benzoxazole-imide)s}, year = {1994}, language = {en} } @article{BrumaSchulzMercer1994, author = {Bruma, Maria and Schulz, Burkhard and Mercer, Frank W.}, title = {Synthesis and characterization of fluorinated poly(imide-pyridazine- amide)s}, year = {1994}, language = {en} } @article{JanietzSchulz1994, author = {Janietz, Silvia and Schulz, Burkhard}, title = {Electrochemical studies on thin films of poly(arylene-1,3,4-oxadiazole)s}, year = {1994}, language = {en} } @article{SchulzJanietz1994, author = {Schulz, Burkhard and Janietz, Silvia}, title = {Electrochemical studies on thin films of poly(arylene 1,3,4-oxadiazole)s}, year = {1994}, language = {en} } @article{Schulz1994, author = {Schulz, Burkhard}, title = {Eine neue Synthesevariante f{\"u}r aromatische Poly(1,3,4-oxadiazole)}, year = {1994}, language = {de} } @article{Schulz1994, author = {Schulz, Burkhard}, title = {Neue thermostabile Polyheterocyclen}, year = {1994}, language = {de} } @article{Schulz1994, author = {Schulz, Burkhard}, title = {New aspects of the solid-state structures and electrochemical properties of aromatic Poly(1,3,4- Oxadiazole)s}, year = {1994}, language = {en} } @article{Schulz1994, author = {Schulz, Burkhard}, title = {Struktur und Eigenschaften d{\"u}nner Schichten aus aromatischen Poly(1,3,4- oxadiazol)en}, year = {1994}, language = {de} } @article{ReicheFreydankDietzeletal.1995, author = {Reiche, J{\"u}rgen and Freydank, A. and Dietzel, Birgit and Katholy, Stefan and Knochenhauer, Gerald and Zetzsche, Thomas and Schulz, Burkhard and Brehmer, Ludwig}, title = {Komplexe Strukturanalytik von Oxadiazol-Mono- und Multischichten}, year = {1995}, language = {de} } @article{BrehmerDietzelFreydanketal.1995, author = {Brehmer, Ludwig and Dietzel, Birgit and Freydank, Anke-Christine and Katholy, Stefan and Knochenhauer, Gerald and Reiche, J{\"u}rgen and Schulz, Burkhard and Zetzsche, Thomas}, title = {Langmuir- und Langmuir-Blodgett-Filme amphiphiler Oxadiazole}, year = {1995}, language = {de} } @article{OkatovaLavrenkoFedotovetal.1995, author = {Okatova, Olga V. and Lavrenko, Peter N. and Fedotov, Y. A. and Schulz, Burkhard}, title = {Polyelectrolyte behavior of some new polyheteroarylene derivatives in sulfuric acid}, year = {1995}, language = {en} } @article{SavaSchulzZhuetal.1995, author = {Sava, Ion and Schulz, Burkhard and Zhu, Shigen and Bruma, Maria}, title = {Synthesis and characterization of new silicon-containing poly(arylene-1,3,4-oxadiazole)s}, issn = {0954-0083}, doi = {10.1088/0954-0083/7/4/011}, year = {1995}, language = {en} } @article{SchulzBrehmerDietzeletal.1995, author = {Schulz, Burkhard and Brehmer, Ludwig and Dietzel, Birgit and Zetzsche, Thomas}, title = {Preparation and characterization of ordered thin films based on aromatic poly(1,3,4-oxadiazole)s}, year = {1995}, language = {en} } @article{SchulzKnochenhauerBrehmeretal.1995, author = {Schulz, Burkhard and Knochenhauer, Gerald and Brehmer, Ludwig and Janietz, Silvia}, title = {Stuctures and properties of aromatic poly(1,3,4-oxadiazole)s}, year = {1995}, language = {en} } @article{SchulzStillerZetzscheetal.1995, author = {Schulz, Burkhard and Stiller, Burkhard and Zetzsche, Thomas and Knochenhauer, Gerald and Dietel, Reinhard and Brehmer, Ludwig}, title = {Characterization of 2,5-di(p-tolyl-1,3,4- oxadiazole) crystals by IR-spectroscopy and atomic force microscopy}, year = {1995}, language = {en} } @article{BauerSchulzBrehmeretal.1995, author = {Bauer, J. and Schulz, Burkhard and Brehmer, Ludwig and B{\"o}tcher, M. and Jagdhold, U. and H{\"o}ppner, K. and Kulesch, A. and Dietzel, Birgit}, title = {Anwendung von Langmuir-Blodgett-Schichten als Resist f{\"u}r die Niederspannungs-Elektronenstrahl-Lithografie}, year = {1995}, language = {de} } @article{BrumaSchulzMercer1995, author = {Bruma, Maria and Schulz, Burkhard and Mercer, Frank W.}, title = {Polyamide copolymers containing hexafluoroisopropylidene groups}, year = {1995}, language = {en} } @article{SchulzBrehmer1995, author = {Schulz, Burkhard and Brehmer, Ludwig}, title = {Preparation and characterization of ordered thin films based on aromatic poly(1,3,4-oxadiazole)s}, year = {1995}, language = {en} } @article{SchulzJanietz1995, author = {Schulz, Burkhard and Janietz, Silvia}, title = {Preparation and characterization of thin films containing aromatic poly(1,3,4- oxadiazole)s}, year = {1995}, language = {en} } @article{Schulz1995, author = {Schulz, Burkhard}, title = {Structure and properties of thin polyoxadiazole films}, year = {1995}, language = {en} } @article{SchulzBrehmerKnochenhauer1995, author = {Schulz, Burkhard and Brehmer, Ludwig and Knochenhauer, Gerald}, title = {Supramolecular structures of aromatic 1,3,4-oxadiazole solids}, year = {1995}, language = {en} } @article{JanietzSchulz1995, author = {Janietz, Silvia and Schulz, Burkhard}, title = {Elektrochemische Untersuchungen an aromatischen Poly(1,3,4-oxadiazol)en}, year = {1995}, language = {de} } @article{LavrenkoStrelinaOkatovaetal.1996, author = {Lavrenko, Peter N. and Strelina, Irina A. and Okatova, Olga V. and Schulz, Burkhard}, title = {Orientation of naphthylene ring in the new poly(naphthylen-1,3,4-oxadiazole)s molecules}, year = {1996}, language = {en} } @article{BrumaHamciucHamciucetal.1996, author = {Bruma, Maria and Hamciuc, Corneliu and Hamciuc, Elena and Mercer, Frank W. and Belomoina, Nataliya and Schulz, Burkhard}, title = {Heterocyclic polyamides containing hexafluoroisopropylidene groups}, year = {1996}, language = {en} } @article{BrumaHamciucSavaetal.1996, author = {Bruma, Maria and Hamciuc, Corneliu and Sava, Ion and Hamciuc, Elena and Mercer, Frank W. and Fritzsche, P. and Schulz, Burkhard}, title = {High temperature polyamides containing pendant imide groups}, year = {1996}, language = {en} } @article{ZhuSchulzBrumaetal.1996, author = {Zhu, Shigen and Schulz, Burkhard and Bruma, Maria and Brehmer, Ludwig}, title = {Comparative study of the thermal properties of related aromatic polyhydrazides and poly(1,3,4-oxadiazole)s}, issn = {1042-7147}, doi = {10.1002/(SICI)1099-1581(199612)7:12<879::AID-PAT600>3.0.CO;2-X}, year = {1996}, language = {en} } @article{HamciucSchulzBruma1996, author = {Hamciuc, Corneliu and Schulz, Burkhard and Bruma, Maria}, title = {New polyhydrazides and polyoxadiazoles containing pendent phenoxy groups}, year = {1996}, language = {en} } @article{JanietzSchulz1996, author = {Janietz, Silvia and Schulz, Burkhard}, title = {Electrochemical investigation on poly(arylene-1,3,4-oxadiazole)s}, year = {1996}, language = {en} } @article{OkatovaAndreevaSchulz1996, author = {Okatova, Olga V. and Andreeva, Katharina A. and Schulz, Burkhard}, title = {Thermal hydrolytic degradation of polyoxadiazole derivatives}, year = {1996}, language = {en} } @article{Schulz1996, author = {Schulz, Burkhard}, title = {Herstellung und Charakterisierung geordneter ultrad{\"u}nner Poly(arylen- 1,3,4-oxadiazol) Schichten}, year = {1996}, language = {de} } @article{HamciucHamciucBrumaetal.1997, author = {Hamciuc, Elena and Hamciuc, Corneliu and Bruma, Maria and Stoleriu, Andre and Schulz, Burkhard}, title = {Poly(hydrazide-ester)s and poly(1,3,4-oxadiazole-ester)s containing pendent phenoxy groups}, year = {1997}, abstract = {A series of new arornatic poly(hydrazide-ester)s has been synthesized by solution polycondensation of two diacid dichlorides containing preformed ester groups with phenoxyterephthaloyl dihydrazide or with a mixture of phenoxyterephthaloyl dihydrazide with terephthaloyl- or isophthaloyl dihydrazide in N-methyl-2-pyrrolidinone. The thermal cyclization of the poly(hydrazide-ester)s gave the corresponding poly(1,3,4-oxadiazole-ester)s containing pendent phenoxy groups. The polymers were characterized by viscometry, solubility measurements, IR spectroscopy, differential scanning calorimetry and thermogravimetric analysis.}, language = {en} } @article{OrgzallLorenzMikatetal.1997, author = {Orgzall, Ingo and Lorenz, Bernd and Mikat, J{\"u}rgen E. R. and Dietel, Reinhard and Knochenhauer, Gerald and Schulz, Burkhard}, title = {Raman and IR spectroscopic investigation of aromatic 1,3,4-oxadiazole polymers and oligomers}, year = {1997}, abstract = {The molecular structure of poly(p-phenylene-1,3,4-oxadiazole) (POD) is investigated using i.r. and Raman spectroscopy. Both methods reveal characteristic differences for the a- and b-POD forms that are most obvious in the spectral region between 1500 and 1650 cm-1. The spectra for dimer and tetramer compounds already show the same features as found for longer chains. Based on molecular modelling calculations these differences are assigned to cis and trans conformations of the main chain segments. High pressure measurements show a linear shift of the Raman lines and support the result of the thermodynamic stability of the trans conformation.}, language = {en} } @article{SchulzStillerZetzscheetal.1997, author = {Schulz, Burkhard and Stiller, Burkhard and Zetzsche, Thomas and Knochenhauer, Gerald and Brehmer, Ludwig}, title = {Characterization of crystals based on 1,3,4-oxadiazoles by atomic force microscopy}, year = {1997}, abstract = {The surface structures of crystals based on aromatic oxadiazoles were investigated by AFM. The crystal structure for 2,5-di(p-tolyl)-1,3,4-oxadiazole (DTO) differs from that of 2,5-di (4-methoxycarbonyl-phenyl)-1,3,4- oxadiazole (DMPO). In DMPO all molecules show parallel orientation to the surface in such a way that the surface is formed as well as by the nitrogen atoms of the heterocyclic rings and the methyl groups of the ester substituents. By contrast, the oxadiazole molecules in DTO crystals are oriented perpendicular to the crystal surface. The experimental data are interpreted by molecular modelling. It is shown that there is a difference between molecular structure of the surface, as detected by AFM, and the bulk structure determined by X-ray diffraction.}, language = {en} } @article{ReicheZetzscheHelmsetal.1997, author = {Reiche, J{\"u}rgen and Zetzsche, Thomas and Helms, Andreas and Freydank, Anke-Christine and Knochenhauer, Gerald and Schulz, Burkhard and Brehmer, Ludwig}, title = {Organized molecular films of oxadiazole compounds formed by vacuum deposition}, year = {1997}, language = {en} } @article{SchulzBrumaBrehmer1997, author = {Schulz, Burkhard and Bruma, Maria and Brehmer, Ludwig}, title = {Aromatic poly(1,3,4-oxadiazole)s as advanced materials}, year = {1997}, abstract = {Poly(1,3,4-oxadiazole)s have been the focus of considerable interest with regard to the- production of high- performance materials, particularly owing to their high thermal stability in oxidative atmosphere and specific properties determined by the structure of 1,3,4-oxadiazole ring, which, from the spectral and electronic points of view, is similar to a p-phenylene structure.[1] Besides their excellent resistance to high temperature, polyoxadiazoles have many desirable characteristics, such as good hydrolytic stability, high glass transition temperatures, low dielectric constants, and tough mechanical properties. Some polyoxadiazoles have semiconductive properties, other structures can be electrochemically doped and thus made conductive, and other have liquid-crystalline properties, which make them very attractive for a wide range of high-performance applications. They exhibit excellent fiber- and film-forming capabilities, thus being considered for use as heat-resistant reinforcing fibers for advanced composite materials, highly resistant fabrics for the filtration of hot gases, special membranes for gas separation or reverse osmosis, precursors for highly oriented graphite fibers, films, and blocks to be used in the construction of electronic instruments based on X-rays, neutron beams, or a-particles, or in the construction of nuclear reactor walls. Since they were first reported in 1961,[2] a wide variety of polymers containing 1,3,4-oxadiazole rings have been synthesized, and their preparation, characterization, and physico-mechanical properties have been periodically reviewed .[3-8] This article will present a general overview of this class of polymers and will refer to the work carried out by different researchers in the last ten years with the emphasis on the potential uses of such polymers as advanced materials.}, language = {en} } @article{SavaSzesztayBrumaetal.1997, author = {Sava, Ion and Szesztay, Marta and Bruma, Maria and Mercer, Frank W. and Schulz, Burkhard}, title = {Compared properties of aromatic polyamides containing silicon in the chain}, year = {1997}, abstract = {Two series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups have been synthesized and their properties have been characterized and compared with those of related polymers. These polymers are easily soluble in polar amidic solvents such as N-rnethyl-2-pyrrolidinone and dimethylformamide, and in tetrahydrofuran, and can be cast into thin, transparent films from solution. The polyamides have weight- and number-average molecular weights in the range of 10000-40000 and 3000-6000, respectively, and polydispersities in the range of 3-10. They show glass transition temperatures in the range of 236 °C-275 °C and decomposition temperatures above 400 °C. The polymer films have low dielectric constants in the range of 3.26-3.68, and good mechanical properties (tensile strength 74-100 MPa, tensile modulus 180-386 MPa), thus being comparable with other high performance dielectrics.}, language = {en} } @article{LavrenkoSchulzStrelinaetal.1997, author = {Lavrenko, Peter N. and Schulz, Burkhard and Strelina, Irina A. and Okatova, Olga V.}, title = {Synthesis and molecular properties of new poly(naphthalene-1,3,4-oxadiazole)s}, year = {1997}, abstract = {Poly[(1,4-naphthalene)-2,5-diyl-1,3,4-oxadiazole] and poly[(2,6-naphthalene)-2,5-diyl-1,3,4-oxadiazole] have been synthesized and investigated in conc. H2S04, by the flow birefringence method in comparison with poly(1,4- phenylene)-2,5-diyl-1,3,4-oxadiazole]. Changes in conformation parameters and optical anisotropy of a chain unit induced by incorporation of the naphthalene groups into the macromolecule backbone have been evaluated.}, language = {en} } @article{BrumaHamciucHamciucetal.1997, author = {Bruma, Maria and Hamciuc, Corneliu and Hamciuc, Elena and Mercer, Frank W. and Belomoina, Nataliya and Schulz, Burkhard}, title = {Heterocyclic polyamides containing hexafluoroisopropylidene groups}, year = {1997}, abstract = {New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenyl- quinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N,N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225 - 300°C. The polymer films exhibit good chemical resistance towards deluted acids and good electrical insulating properties with dielectric constants in the range of 3.2 - 3.7.}, language = {en} } @article{LavrenkoStrelinaSchulz1997, author = {Lavrenko, Peter N. and Strelina, Irina A. and Schulz, Burkhard}, title = {Dynamo-optical properties of poly(naphthylene oxadiazole)s in sulfuric acid}, year = {1997}, abstract = {Flow birefringence induced in dilute solutions of poly[(1,4-naphthylene)-2,5-diyl-1,3,4-oxadiazole] and poly[2,6-naphthylene)-2,5-diyl-1,3,4-oxadiazole] in conc. sulphuric acid has been investigated. The shear optical coefficient was found for these polymers to be approximately double the value of that obtained in the same solvent for poly[(para-phenylene) -2,5-diyl-1,3,4-oxadiazole]. Rigid-chain behaviour of the polymers was characterized by hydrodynamic and dynamo-optical parameters evaluated with application of the worm-like chain model and the "method of similar structures". Change in optical anisotropy of a chain unit induced by incorporation of naphthylene groups into the main chain has been evaluated.}, language = {en} } @article{SchulzKaminorzBrehmer1997, author = {Schulz, Burkhard and Kaminorz, Yvette and Brehmer, Ludwig}, title = {New aromatic poly(1,3,4-oxadiazole)s for light emitting diodes}, year = {1997}, abstract = {New aromatic poly(1,3,4-oxadiazole)s were synthesized having excellent film forming properties due to their solubility in common organic solvents. The investigated new polyoxadiazoles can be used as emission material in single layer LED. The poly- oxadiazoles show an emission in the range of blue to yellow light. The external quantum efficiency as well as the turn-on voltage of the devices are influenced when blends of the polyoxadiazole with hole transport materials are used.}, language = {en} } @article{SavaBrumaSchulzetal.1997, author = {Sava, Ion and Bruma, Maria and Schulz, Burkhard and Mercer, Frank W. and Belomoina, Nataliya}, title = {Synthesis and Properties of Silicon-containing Polyamides}, year = {1997}, abstract = {A series of aromatic polyamides incorporating silicon together with phenylquinoxaline or with hexafluoroisopropylidene groups has been synthesized by solution polycondensation of a silicon-containing diacid chloride with aromatic diamines having phenylquinoxaline rings or hexafluoroisopropylidene groups. These polymers are easily soluble in polar aprotic solvents, such as N-methylpyrrolidinone and dimethylformamide, and in tetrahydrofurane, and can be solution-cast into thin, transparent films having low dielectric constant, in the range of 3.26 to 3.68. These polymers show high thermal stability with decomposition temperature being above 400 °C and glass transition temperature in the range of 236 °C to 275 °C.}, language = {en} } @phdthesis{Schulz1997, author = {Schulz, Burkhard}, title = {Entwicklung aromatischer Poly(1,3,4-oxadiazo)e zu Funktionsmaterialien : Beitr{\"a}ge durch chemische Modifizierung und supramolekulare Strukturierung}, address = {Potsdam}, pages = {getr. Z{\"a}hl.: graph. Darst.}, year = {1997}, language = {de} } @article{ReicheSchulzKnochenhaueretal.1997, author = {Reiche, J{\"u}rgen and Schulz, Burkhard and Knochenhauer, Gerald and Dietzel, Birgit and Freydank, Anke-Christine and Zetzsche, Thomas and Brehmer, Ludwig}, title = {Supramolecular structures formed from heterocyclic aromatic molecules}, year = {1997}, abstract = {This paper describes the formation and structure investigation of Langmuir monolayers and Langmuir-Blodgett multilayers formed from amphiphilic derivatives of 2,5-diphenyl-1,3,4-oxadiazole. The 2,5-diphenyl-1,3,4-oxadiazole group as a functional unit with interesting physical and chemical properties is maintained, while the head group, the length of the alkyl chain and the structure of the coupling unit between aromatic and aliphatic part of these linear short-chain amphiphiles is systematically varied in order to explore the influence of this change on the film forming properties and the stability of Langmuir and Langmuir-Blodgett films. Molecular mechanics simulations are shown by these systematic variations to be suitable for the prediction of optimal chemical structures allowing for a stable stratified molecular packing. The combination of a detailed structure investigation of the multilayers based on scanning force microscopy and X-ray data with molecular mechanics simulations yields an insight into the packing of the molecules and the intermolecular interactions.}, language = {en} } @article{FreydankJanietzSchulz1998, author = {Freydank, Anke-Christine and Janietz, Silvia and Schulz, Burkhard}, title = {Synthesis and electrochemical behaviour of Amphiphilic 1,3,4-Oxadiazole derivatives}, year = {1998}, language = {en} } @article{FreydankJanietzSchulz1998, author = {Freydank, Anke-Christine and Janietz, Silvia and Schulz, Burkhard}, title = {Synthesis and electrochemical characterization of new amphiphilic 1,3,4-oxadiazoles}, year = {1998}, abstract = {The electrochemical behaviour of new amphiphilic 1,3,4-oxadiazoles were studied by cyclic voltammetry. The influence of the supra- molecular structure on the redox behaviour in liquid or solid solutions, in Langmuir-Blodgett multilayers, and in amorphous films is investigated in detail. The reversible reduction of amphiphilic 2,5-diarylene- 1,3,4-oxadiazoles is significantly influenced by substituents in the para position of the phenylene ring. In the solid states the reduction peak potentials are shifted to more negative values compared to data measured in solution. This shift increases as the film thickness is increased. An influence of the supramolecular order in the solid films was not found. In-situ UV-vis spectroelectrochemistry of LB-multilayers deposited onto indium tin oxide (ITO) glass give evidence for the formation of radical anions in the highly ordered layer.}, language = {en} } @article{LavrenkoOkatovaSchulz1998, author = {Lavrenko, Peter N. and Okatova, Olga V. and Schulz, Burkhard}, title = {Stability and degradation of poly(p-pheneylene-1,3,4-oxadiazole) molecules in sulphuric acid}, year = {1998}, abstract = {The translational diffusion coefficient and intrinsic viscosity of poly(1,4-phenylene-1,3,4-oxadiazole) molecules in 96\% H2S04 have been determined at different stages of degradation of the molecules in acid solution at temperature ranging from 82 to 105 °C. The degradation rate constant, k, has been obtained from the change in the molecular weight, M, of the product degraded in solution with time at high temperature. The activation energy of the hydrolysis process was 103 ± 7 kJmol-1, which is smaller than that of aromatic polyamides in the same solvent. According to our hydrodynamic data, the degree of coiling of the molecules of degraded products does not differ from that of undegraded samples, and our conclusion was that the degradation is not accompanied with a noticeable change in the short- range interactions in the molecular chain and may be understood as a random chain scission.}, language = {en} } @article{LavrenkoOkatovaSchulz1998, author = {Lavrenko, Peter N. and Okatova, Olga V. and Schulz, Burkhard}, title = {Hydrodynamic properties and conformation of the molecules of meta- and para-isomers of polyphenyleneoxadiazole in sulphuric acid}, year = {1998}, abstract = {Translational diffusion of poly(1,4-phenylene-1,3,4-oxadiazole) in 96\% H2S04 was studied, and the intrinsic viscosity of the polymer solution was measured in various stages of degradation at temperatures from 82 to 105°C. The rate constant of the degradation process was determined from variation of the molecular mass of the degradation products with time at a fixed solution temperature, and the activation energy of the process was calculated using the temperature dependence of the rate constant. The activation energy (E = 103 ± 7 kJ/mol) is lower than that for the hydrolysis of aromatic polyamides in sulfuric acid. According to the hydrodynamic data, the degree of coiling of the degradation products is the saine as that of the intact (non-degraded) macromolecules. This indicates that elements of the chernical structure responsible for the short-range order in the macromolecular chain are retained in the course of degradation.}, language = {en} } @article{BrumaSavaMerceretal.1998, author = {Bruma, Maria and Sava, Ion and Mercer, Frank W. and Reddy, Victor N. and K{\"o}pnick, Thomas and Stiller, Burkhard and Schulz, Burkhard}, title = {Silicon-containing poly(amide-ether)s}, year = {1998}, abstract = {New aromatic poly(amide-ether)s (II) have been synthesized by solution polycondensation of various aromatic diamines having two ether bridges (I) with a diacid chloride containing silicon, namely bis(chlorocarbonylphenyl)- diphenyIsilane. These polymers are easy soluble in polar amidic solvents such as N-methylpyrrolidinone or dimethylformamide and can be cast into thin flexible films or coatings from such solutions. They show high thermal stability with initial decomposition temperature being above 400 °C. Their glass transition temperatures lie in the range of 220-250 °C, except for polymer He which did not show a clear Tg when heated in a differential scanning calorimetry experiment up to 300 °C. The large interval between the glass transition and decomposition temperatures of pnlymers Ia-Id could be advantageous for their processing via compression molding. The polymer coatings deposited by the spincoating, technique onto silicon wafers showed a very smooth, pinhole-free surface in atomic force microscopy investigations. The free-standing films of 20-30 mm thickness show low dielectric constant, in the range of 3.65-3.78, which is promising for future application as high performance dielectrics.}, language = {en} } @article{BrumaSchulzKoepnicketal.1998, author = {Bruma, Maria and Schulz, Burkhard and K{\"o}pnick, Thomas and Dietel, Reinhard and Stiller, Burkhard and Mercer, Frank W.}, title = {Investigation of thin films made from silicon-containing poly(phenylquinoxaline-amide)s}, year = {1998}, abstract = {Thin films in the range of 50 nm to 10 mm thickness have been prepared from NMP solutions of silicon-containing polyphenylquinoxaline-amides which had been synthesized by the polycondensation reaction of aromatic diaminophenylquinoxalines with bis(p-chlorocarbonylphenyl)diphenylsilane. A spin-coating technique onto glass plates or onto silicon wafers was used to make the film, followed by gradual heating to remove the solvent. The resulting films were very smooth and free of pinholes when studied by atomic force microscopy (AFM). They showed a strong adhesion to silicon wafers, were thermally stable in air to above 400 °C and their dielectric constant was in the range of 3.5-3.7. Thermal treatment of the films was performed in order to induce crosslinking. Such treated films became completely insoluble in organic solvents, maintained their smoothness and strong adhesion to the silicon substrate, and did not show any Tg, in DSC experiments. Their FTIR spectra in reflection mode did not show any changes compared with the untreated films, meaning on the one hand that the polymers maintain their structural integrity at high temperature and on the other hand that the number of crosslinks was very low and could not be detected by IR spectroscopy.}, language = {en} } @article{LavrenkoOkatovaCherkasovetal.1998, author = {Lavrenko, Peter N. and Okatova, Olga V. and Cherkasov, Victor A. and Schulz, Burkhard}, title = {Hydrodynamic properties of Poly(p-phenylene-oxadiazole) in various stages of hydrolytic thermal degradation in sulfuric acid}, year = {1998}, language = {en} } @article{OrgzallLorenzMikatetal.1998, author = {Orgzall, Ingo and Lorenz, Bernd and Mikat, J{\"u}rgen E. R. and Reck, G{\"u}nter and Knochenhauer, Gerald and Schulz, Burkhard}, title = {Phase transition in 1,3,4-oxadiazole crystals under high pressure}, year = {1998}, language = {en} } @article{BrumaSchulzKoepnicketal.1998, author = {Bruma, Maria and Schulz, Burkhard and K{\"o}pnick, Thomas and Stiller, Burkhard and Hamciuc, Elena and Mercer, Frank W. and Cassidy, Peter}, title = {Aromatic polyamides with hexafluoroisopropylidene groups and study of the thin}, year = {1998}, language = {en} } @article{GieblerSchulzReicheetal.1999, author = {Giebler, Rainer and Schulz, Burkhard and Reiche, J{\"u}rgen and Brehmer, Ludwig and W{\"u}hn, Mario and W{\"o}ll, Christoph and Smith, Andrew Phillip and Urquhart, Steven G. and Ade, Harald W. and Unger, Wolfgang E. S.}, title = {Near-edge x-ray absorption fine structure spectroscopy on ordered films of an amphiphilic derivate of 2,5- Diphenyl-1,3,4-oxadiazole}, year = {1999}, abstract = {The surfaces of ordered films formed from an amphiphilic derivative of 2,5-diphenyl-1,3,4-oxadiazole by the Langmuir-Blodgett (LB) technique and organic molecular beam deposition (OMBD) were investigated by the use of near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. For the assignment of the spectral features of the C, N, and O K- edge absorption spectra, fingerprint spectra of poly(p-phenylene terephthalamide)(Kevlar), poly(ethylene terephthalate), poly(p-phenylene-1,3,4-oxadiazole), and 2,5-di- (pentadecyl)-1,3,4-oxadiazole, which contain related chemical moieties, were recorded. Ab initio molecular orbital calculations, performed with explicit treatment of the core hole, are used to support the spectral interpretations. Angle-resolved NEXAFS spectroscopy at the C, N, and O K-edges suggests a preferentially upright orientation of the oxadiazole derivative in the outermost layer of the films. X-ray specular reflectivity data and molecular modeling results suggest a similar interpretation.}, language = {en} } @article{BrumaSchulzKoepnicketal.1999, author = {Bruma, Maria and Schulz, Burkhard and K{\"o}pnick, Thomas and Stiller, Burkhard and Belomoina, Nataliya and Mercer, Frank W.}, title = {Synthesis and study of aromatic polyamides containing silicon and phenylquinoxaline rings in the main chain}, year = {1999}, abstract = {New poly(phenylquinoxaline-amide)s with silicon in the main chain have been prepared by polycondensation reaction of a diacid chloride, namely bis(p-chlorocarbonyl-phenyl)-diphenylsilane, with aromatic diamines containing one or two phenylquinoxaline rings separated by a flexible bridge such as ether or methylene. These polymers were easily soluble in polar aprotic solvents such as N-methylpyrrolidinone (NMP) and dimethylformamide (DMF) and showed high thermal stability with decomposition temperature being above 450°C and glass transition temperature in the range of 260- 304°C. Polymer solutions in NMP were processed into thin flexible films which exhibited very smooth surfaces, free of pinholes when studied by atomic force microscopy. The free-standing films showed a dielectric constant in the range of 3.6-3.7.}, language = {en} } @article{BrumaHamciucSchulzetal.1999, author = {Bruma, Maria and Hamciuc, Elena and Schulz, Burkhard and K{\"o}pnick, Thomas and Stiller, Burkhard and Mercer, Frank W.}, title = {Synthesis of fluorinated poly(phenylquinoxaline-amide)s and study of thin films made therefrom}, year = {1999}, abstract = {A series of five fluorinated poly(phenylquinoxaline-amide)s were synthesized by a polycondensation reaction of a diacid chloride containing the hexafluoroisopropylidene (6F) group, namely 2,2-bis(p-chlorocarbonylphenyl)- hexafluoropropane, with various aromatic diamines incorporating two phenyl-substituted quinoxaline rings. These polymers were easily soluble in polar aprotic solvents such as N-methylpyrrolione (NMP), dimethylformamide (DMF), and tetrahydrofurane (THF), and showed a high thermal stability with decomposition temperatures above 400 °C and glass transition temperatures in the range of 260-290 Tg. Polymer solutions in NMP were processed into free-standing films that showed low dielectric constant values, in the range of 3.4-3.9, and good mechanical properties, with tensile strength in the range of 40-80 MPa and elongation to break in the range of 22-55\%. Very thin films, in the range of tens of nanometer, which were deposited onto silicon wafers exhibited very smooth surfaces, free of pinholes when studied by atomic force microscopy (AFM).}, language = {en} } @article{BrumaSchulzKoepnicketal.1999, author = {Bruma, Maria and Schulz, Burkhard and K{\"o}pnick, Thomas and Stiller, Burkhard and Mercer, Frank W.}, title = {Study of thin films made from aromatic polyamides with silicon and phenylquinoxaline rings in the main chain}, year = {1999}, abstract = {Aromatic polyamides containing silicon and phenylquinoxaline rings in the main chain have been prepared by polycondensation reaction of a silicon-containing diacid chloride, namely bis(p-chlorocarbonylphenyl) -diphenylsilane, with various aromatic diamines having preformed phenylquinoxaline units. These polymers were easily soluble in polar aprotic solvents, such as N-methylpyrrolidinone (NMP) and dimethylformamide (DMF), and in tetrahydrofurane. They showed high thermal stability with decomposition temperature being above 450°C and glass transition temperature in the range of 253-304°C. Polymer solutions in NMP were processed into thin films having the thickness of tens of nanometer to 10 mm, by spin-coating onto glass plates or silicon wafers. The films had strong adhesion to substrates and exhibited very smooth surfaces, free of pinholes, in atomic force microscopy (AFM) studies. The free-standing films had dielectric constant in the range of 3.48-3.69. Thermal treatment of the films up to 350°C rendered them completely insoluble in organic solvents, while maintaining their smoothness and strong adhesion to the silicon substrate, and with no Tg in DSC experiments. Their FTIR spectra did not show any changes compared to the untreated films, meaning that polymers maintain their structural integrity at high temperature. {\´O} 1999 Elsevier Science S.A. All rights reserved.}, language = {en} } @article{OkatovaAndreevaSchulzetal.1999, author = {Okatova, Olga V. and Andreeva, Katharina A. and Schulz, Burkhard and Lavrenko, Peter N.}, title = {Degradation of poly(m-phenylene oxadiazole) in concentrated sulfuric acid}, year = {1999}, language = {en} } @article{LavrenkoOkatovaSchulzetal.1999, author = {Lavrenko, Peter N. and Okatova, Olga V. and Schulz, Burkhard and Andreeva, Katharina A. and Strelina, Irina A.}, title = {Hydrodynamic and dynamo-optical properties of poly(1,3-phenylene-1,3,4-oxadiazole) molecules in sulphuric acid}, year = {1999}, abstract = {Translational diffusion of the macromolecules, intrinsic viscosity and flow birefringence induced in dilute solutions of poly(1,3-phenylene-1,3,4-oxadiazole) (PMOD) in conc. sulphuric acid has been investigated. Molecular-weight dependences of hydrodynamic and dynamo-optical properties are established over the M range from 8.1 103 to 87 103. Experimental data agree well with the theories developed for translational friction and intrinsic viscosity of the wormlike chains with the following molecular parameters: mass per chain unit ML = 22.7 Dalton/{\AA}, the Kuhn segment length A = 59 ± 4 {\AA}, the chain diameter d = 4 ± 1.5 {\AA}. Hindrance to intramolecular rotation is characterized by the parameter s = 1.7. The shear optical coefficient was found to be approximately 1.7 times lower the value of that obtained in the same solvent for the para-phenylene isomer of this polymer, being in good agreement with higher equilibrium flexibility of the PMOD molecule chains in solutions as determined herein from the hydrodynamic data.}, language = {en} } @article{ReicheFreydankHelmsetal.1999, author = {Reiche, J{\"u}rgen and Freydank, Anke-Christine and Helms, Andreas and Geue, Thomas and Schulz, Burkhard and Brehmer, Ludwig and Stiller, Burkhard and Knochenhauer, Gerald}, title = {Vacuum deposition films of oxadiazole compounds : formation and structure investigation}, year = {1999}, abstract = {The search for alternative routes of organic thin film formation is stimulated by the outstanding properties of these films in such fields as nonlinear optics, photonic data processing and molecular electronics. The formation of highly ordered multilayer structures by thermal vacuum deposition (VD) of organic compounds is an essential step toward the application of supramolecular organic architectures in technical systems. The VD of an amphiphilic substituted 2,5- diphenylene-1,3,4-oxadiazole 1 onto silicon substrates at defined temperature was used for the formation of ultrathin films. The structural data obtained for the VD-films of oxadiazole 1 by means of X-ray reflectivity, X-ray grazing incidence diffraction and atomic force microscopy (AFM) investigations indicate the formation of well ordered oxadiazole multilayers. The structure of the VD-multilayers is compared with that of Langmuir-Blodgett (LB) films and thermally treated LB-multilayers prepared from the same compound.}, language = {en} } @article{LavrenkoAndreevaStrelinaetal.1999, author = {Lavrenko, Peter N. and Andreeva, Katharina A. and Strelina, Irina A. and Garmonova, Tatjana I. and Schulz, Burkhard}, title = {Optical anisotropy and flexibility of poly(m-phenylene oxadiazole) in sulfuric acid}, year = {1999}, language = {en} } @article{OrgzallLorenzMikatetal.1999, author = {Orgzall, Ingo and Lorenz, Bernd and Mikat, J{\"u}rgen E. R. and Reck, G{\"u}nter and Knochenhauer, Gerald and Schulz, Burkhard}, title = {Phase transition in 1,3,4-oxadiazole crystals under high pressure}, year = {1999}, abstract = {Crystalline 2,5-di(4-nitrophenyl)-1,3,4-oxadiazole (DNO) has been investigated at pressures up to 5 GPa using Raman and optical spectroscopy as well as energy dispersive X-ray techniques. At ambient pressure DNO shows an orthorhombic unit cell (a = 0.5448 nm, b = 1.2758 nm, c = 1.9720 nm, density 1.513 g cm-3) with an appropriate space group Pbcn. From Raman spectroscopic investigations three phase transitions have been detected at 0.88, 1.28, and 2.2 GPa, respectively. These transitions have also been confirmed by absorption spectroscopy and X-ray measurements. Molecular modeling simulations have considerably contributed to the interpretation of the X-ray diffractograms. In general, the nearly flat structure of the oxadiazole molecule is preserved during the transitions. All subsequent structures are characterized by a stack-like arrangement of the DNO molecules. Only the mutual position of these molecular stacks changes due to the transformations so that this process may be described as a topotactical reaction. Phases II and III show a monoclinic symmetry with space group P21/c with cell parameters a = 1.990 nm, b = 0.500 nm, c = 1.240 nm, ß = 91.7°, density 1.681 g cm-3 (phase II, determined at 1. 1 GPa) and a = 1.890 nm, b = 0.510 nm, C = 1.242 nm, ß = 89.0°, density 1.733 g cm-3 (phase 111, determined at 2.0 GPa), respectively. The high-pressure phase IV stable at least up to 5 GPa shows again an orthorhombic structure with space group Pccn with corresponding cell parameters at 2.9 GPa: a = 0.465 nm, b = 1.920 nm, c = 1.230 nm and density 1.857 g cm-3 . For the first phase a blue pressure shift of the onset of absorption by about 0.032 eV GPa has been observed that may be explained by pressure influences on the electronic conjugation of the molecule. In the intermediate and high-pressure phases II-IV the onset of absorption shifts to increased wavelengths due to larger intermolecular interactions and enhanced excitation delocalization with decreasing intermolecular spacing.}, language = {en} } @article{SchuermannKochImperiaetal.1999, author = {Sch{\"u}rmann, H. and Koch, Norbert and Imperia, Paolo and Schrader, Sigurd and Jandke, M. and Strohriegl, P. and Schulz, Burkhard and Leising, G. and Brehmer, Ludwig}, title = {Ultraviolet photoelectron spectroscopic study of heterocyclic model compounds for electroluminescent devices}, year = {1999}, language = {en} } @article{MikatFrancoRegensteinetal.2000, author = {Mikat, J{\"u}rgen E. R. and Franco, Olga and Regenstein, Wolfgang and Reck, G{\"u}nter and Knochenhauer, Gerald and Schulz, Burkhard and Orgzall, Ingo}, title = {1,3,4-oxadiazole crystals under high pressure-phase transitions and properties}, year = {2000}, language = {en} } @article{KaminorzSchulzBrehmer2000, author = {Kaminorz, Yvette and Schulz, Burkhard and Brehmer, Ludwig}, title = {Optical and Electrical Properties of Substituted 2,5-Diphenyl-1,3,4-Oxadiazoles}, year = {2000}, abstract = {New substituted 2,5-diphenyl-1,3,4-oxadiazoles are reported as luminescent materials in light emitting diodes LEDs . The investigated new oxadiazoles show efficient blue and green emission in single layer devices. The combination with a hole transporting and red emitting polythiophene led to a white emission with higher quantum efficiency (QE).}, language = {en} } @article{KarageorgievStillerPrescheretal.2000, author = {Karageorgiev, Peter and Stiller, Burkhard and Prescher, Dietrich and Dietzel, Birgit and Schulz, Burkhard and Brehmer, Ludwig}, title = {Modification of the surface potential of azobenzene-containing langmuir-blodgett films in the near field of a scanning kelvin microscope tip by irradiation}, year = {2000}, language = {en} } @article{HamaciucBrumaKoepnicketal.2001, author = {Hamaciuc, E. and Bruma, Maria and K{\"o}pnick, Thomas and Kaminorz, Yvette and Schulz, Burkhard}, title = {Synthesis and Study of New Silicon-containing Polyoxadiazoles}, year = {2001}, abstract = {A series of new poly-1,3,4-oxadiazoles has been synthesized by polycondensation reaction of hydrazine sulfate with a mixture of a dicarboxylic acid containing unsaturated bonds and a dicarboxylic acid containing silicon, by using methanesulfonic acid/phosphorus pentoxide as a reaction medium. These polymers were highly thermostable but they were only soluble in strong inorganic acids such as sulfuric or methanesulfonic ones. An alternative way was followed by using the corresponding dihydrazides containing unsaturated bonds and the corresponding diacid chloride containing silicon that reacted in N-methylpyrrolidinone (NMP) to give soluble silicon-containing unsaturated polyhydrazides, which were cyclodehydrated either by thermal or chemical treatment to give the corresponding polyoxadiazoles. Very thin coatings of polyhydrazides and polyoxadiazoles were deposited onto silicon wafers and they showed a very smooth surface, free of pinholes, when studied by atomic force microscopy (AFM). Some polyoxadiazole films showed strong blue photoluminescence.}, language = {en} } @misc{LohwasserHasslerBehrmannetal.2003, author = {Lohwaßer, Roswitha and Haßler, Gerda and Behrmann, G{\"u}nter C. and Schulz, Burkhard and Mieske, Silvio}, title = {Portal = Knappe Kassen: Was das akademische Jahr bringt}, volume = {2003}, organization = {Universit{\"a}t Potsdam, Referat f{\"u}r Presse- und {\"O}ffentlichkeitsarbeit}, issn = {1618-6893}, doi = {10.25932/publishup-50226}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-502262}, pages = {40}, year = {2003}, abstract = {Aus dem Inhalt: - Knappe Kassen: Was das akademische Jahr bringt - Sparkasse finanziert Stiftungsprofessur - Chipkarte ersetzt Studentenausweis aus Papier - Unikonzert im Potsdamer Nikolaisaal}, language = {de} } @article{DiezTauerSchulz2004, author = {Diez, Isabel and Tauer, Klaus and Schulz, Burkhard}, title = {Polypyrrole tubes via casting of pyrrole-beta-naphthalenesulfonic acid rods}, issn = {0303-402X}, year = {2004}, abstract = {A comprehensive study gives experimental evidence that a complex made from pyrrole and beta-naphthalenesulfonic acid in a molar composition of 3:1 acts as morphological precursor in the subsequent oxidative polymerization of pyrrole initiated with ammonium peroxodisulfate. The precursor complex itself is unable to polymerize but its outer parallelepipedal shape with a high aspect ratio is templated in the inner surface of the formed conducting polypyrrole tubes}, language = {en} } @article{KarageorgievNeherSchulzetal.2005, author = {Karageorgiev, Peter and Neher, Dieter and Schulz, Burkhard and Stiller, Burkhard and Pietsch, Ullrich and Giersig, Michael and Brehmer, Ludwig}, title = {From anisotropic photo-fluidity towards nanomanipulation in the optical near-field}, issn = {1476-1122}, year = {2005}, abstract = {An increase in random molecular vibrations of a solid owing to heating above the melting point leads to a decrease in its long-range order and a loss of structural symmetry. Therefore conventional liquids are isotropic media. Here we report on a light-induced isothermal transition of a polymer film from an isotropic solid to an anisotropic liquid state in which the degree of mechanical anisotropy can be controlled by light. Whereas during irradiation by circular polarized light the film behaves as an isotropic viscoelastic fluid, it shows considerable fluidity only in the direction parallel to the light field vector under linear polarized light. The fluidization phenomenon is related to photoinduced motion of azobenzene-functionalized molecular units, which can be effectively activated only when their transition dipole moments are oriented close to the direction of the light polarization. We also describe here how the photofluidization allows nanoscopic elements of matter to be precisely manipulated}, language = {en} } @article{SavaBrumaSchulzetal.2005, author = {Sava, Ion and Bruma, Maria and Schulz, Burkhard and K{\"o}pnick, Thomas}, title = {Comparison of properties of silicon-containing poly(amide-imide)s}, issn = {0954-0083}, year = {2005}, abstract = {New silicon-containing poly(amide-imide)s have been synthesized by direct polycondensation of various aromatic diamines with a dicarboxylic acid containing the dimethylsilylene group and preformed in-tide cycles. These polymers are easily soluble in polar amidic solvents such as N-methylpyrrolidinone (NMP) or dimethylformamide (DMF) and can be cast into thin flexible films or coatings from such solutions. They show high thermal stability, with initial decomposition temperature being above 400 C and glass transition temperature in the range of 220-270 degrees C. Very thin polymer films deposited by spincoating technique onto silicon wafers showed a smooth, pinhole-free surface in atomic force microscopy investigations}, language = {en} } @book{SchulzOrgzallFreydanketal.2005, author = {Schulz, Burkhard and Orgzall, Ingo and Freydank, Anke-Christine and Chenggang, X{\"u}}, title = {Self-organization of substituted 1,3,4-oxadizazoles in the solid state and at surfaces}, year = {2005}, abstract = {Different aspects of the structure formation for a class of molecules containing the diphenyl-1,3,4-oxadiazole fragment are discussed. Starting from the bulk state with the ideal crystal lattice and the derivation of some common packing motifs the formation of liquid-crystalline states are described. This leads to the consideration of structures found in Langmuir-Blodgett films and those obtained by organic molecular beam deposition. These structures may again be compared to those for the bulk crystalline state. Common features as well as characteristic differences due to peculiarities of the individual molecular structures are discussed. (c) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{FrancoOrgzallRecketal.2005, author = {Franco, Olga and Orgzall, Ingo and Reck, G{\"u}nter and Stockhause, Sabine and Schulz, Burkhard}, title = {Structure and high-pressure behavior of 2,5-di-(4-aminophenyl)-1,3,4-oxadiazole}, issn = {0022-3697}, year = {2005}, abstract = {The crystalline structures of two modifications of a compound containing the oxadiazole ring, 2,5-di-(4- aminophenyl)-1,3,4-oxadiazole (DAPO) were determined. One of these modifications contains water molecules in the crystal structure, which is observed for the first time for an oxadiazole crystal. Both crystals show an orthorhombic structure. The water free modification, DAPO L belongs to the space group Pbca (61) and has the lattice parameters: a = 13.461(5), b = 7.937(3) and c = 22.816(8) angstrom (CCDC 246608). The water containing pseudo-polymorph, DAPO 11, has the space group Cmcm (63) and the lattice parameters: a = 16.330(5), b = 12.307(2) and c = 6.9978(14) angstrom (CCDC 246609). To gain information on the inter molecular interactions within the crystals, X-ray experiments under compression at ambient temperature and under heating at vacuum conditions were performed. Neither DAPO I nor DAPO II undergo phase transitions in the ressure range up to 5 GPa, as could be concluded from X-ray and Raman experiments. X-ray and calorimetric studies indicate that DAPO II dehydrates into DAPO I under increasing temperature. Structural considerations suggest a two-stage process. The compression behavior of both substances is well described by the Murnaghan equation of state (MEOS) and the values of the bulk modulus and its pressure derivative are determined for these crystals. Additionally, in the case of DAPO I, also the thermal expansion coefficient an was measured. (c) 2005 Elsevier Ltd. All rights reserved}, language = {en} } @article{OrgzallFrancoRecketal.2005, author = {Orgzall, Ingo and Franco, Olga and Reck, Guenter and Schulz, Burkhard}, title = {High-pressure studies on fluorine substituted 2,5-di(phenyl)-1,3,4-oxadiazoles}, issn = {0022-2860}, year = {2005}, abstract = {Results are presented from structural and high-pressure investigations on four differently but symmetrically fluorine substituted 2,5di(phenyl)-1,3,4-oxadiazoles. The substitution pattern includes the para-, meta-, or ortho- substitution and the fully fluorinated 2,5-bis(pentafluorophenyl)-1,3,4-oxadiazole. The crystal structure depends on the molecular structure and results in a different high-pressure behavior. Parameters for the Murnaghan equation of state (EOS) are determined for every compound and the anisotropic pressure response of the crystal lattice is discussed. Although the EOS parameters, bulk modulus K. and its pressure derivative K'(o) are of the same order of magnitude for all four compounds, the anisotropy of strain is noticeably different. (c) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{DiezTauerSchulz2006, author = {Diez, Isabel and Tauer, Klaus and Schulz, Burkhard}, title = {Unusual polymer dispersions-polypyrrole suspensions made of rings, frames, and platelets}, series = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, volume = {284}, journal = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft}, publisher = {Springer}, address = {New York}, issn = {0303-402X}, doi = {10.1007/s00396-006-1521-8}, pages = {1431 -- 1442}, year = {2006}, abstract = {Experimental results show that the polymerization of pyrrole in the presence of beta-naphthalenesulfonic acid and different fluorosurfactants like perfluorooctanesulfonic acid, perfluorooctyldiethanolamide, and ammonium perfluorooctanoate leads to polypyrrole with special morphologies, such as rings or disks and rectangular frames or plates. The formation of these unusually shaped particles of polymer dispersions is explained by the chemical and colloidal peculiarities of the oxidative pyrrole polymerization with ammonium peroxodisulfate in aqueous medium.}, language = {en} } @article{FrancoOrgzallRegensteinetal.2006, author = {Franco, Olga and Orgzall, Ingo and Regenstein, Wolfgang and Schulz, Burkhard}, title = {Structural and spectroscopical study of a 2,5-diphenyl-1,3,4-oxadiazole polymorph under compression}, issn = {0953-8984}, doi = {10.1088/0953-8984/18/4/029}, year = {2006}, abstract = {The x-ray pattern and the Raman and luminescence spectra of crystalline 2,5-diphenyl-1,3,4-oxadiazole in one of its polymorphic forms (DPO II) have been investigated under pressure up to 5 GPa. The behaviour of the lattice parameters under compression was determined and it was found that the Murnaghan equation of state provides a good description of the volume-pressure relationship of DPO II. The values for the bulk modulus and its pressure derivative are K-0 = 8.6 GPa and K-0' = 7.2. The analysis of the Raman spectrum under compression clearly shows the pressure- induced shift of the Raman modes to higher frequencies. The mode Gruneisen parameters for the lattice modes were determined. Additionally, it was found that the emission spectrum of DPO II moves to lower energies and that the luminescence intensity decreases when pressure is applied}, language = {en} } @article{OrgzallFrancoSchulz2006, author = {Orgzall, Ingo and Franco, Olga and Schulz, Burkhard}, title = {High pressure structural investigations of 2,5-di(4-pyridyl)-1,3,4-oxadiazole - importance of strain studies for the description of intermolecular interactions}, doi = {10.1088/0953-8984/18/23/001}, year = {2006}, abstract = {Results of a high pressure x-ray study of 2,5-di(4-pyridyl)-1,3,4-oxadiazole up to 2.5 GPa are presented and discussed. Parameters for the Murnaghan equation of state are derived. The bulk modulus amounts to K-0 = 4.6 +/- 0.3 GPa and its pressure derivative to K-0' = 7.4 +/- 0.6. These values are comparable to values of other diphenyl-1,3,4- oxadiazoles. The anisotropy of the compression is analysed using the strain tensor and discussed based on the anisotropy of the intermolecular interactions}, language = {en} } @article{EmmerlingOrgzallRecketal.2006, author = {Emmerling, Franziska and Orgzall, Ingo and Reck, G{\"u}nter and Schulz, Burkhard W. and Stockhause, Sabine and Schulz, Burkhard}, title = {Structures of substituted di-aryl-1, 3,4-oxadiazole derivatives: 2,5-bis(pyridyl)- and 2,5-bis(aminophenyl)-substitution}, series = {Journal of molecular structure}, volume = {800}, journal = {Journal of molecular structure}, number = {1-3}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2006.03.076}, pages = {74 -- 84}, year = {2006}, abstract = {Crystal structures of four different di-aryl-1,3,4-oxadiazole compounds (aryl = 2-pyridyl-, 3-pyridyl-, 2-aminophenyl-, 3-aminophenyl-) are determined. Crystallization of di(2-pyridyl)-1,3,4-oxadiazole yielded monoclinic and triclinic polymorphs. The structures are characterized by the occurrence of pi-pi interactions. Additionally, in case of the aminophenyl compounds intra- as well as intermolecular hydrogen bonds are found that influence the packing motif as well. Since these molecules are often used as ligands in metal-organic complexes similarities and differences of the molecular conformation between the molecules in the pure crystals and that of the ligands in the complexes are discussed. (c) 2006 Elsevier B.V. All rights reserved.}, language = {en} } @article{SchulzDietzelOrgzalletal.2009, author = {Schulz, Burkhard and Dietzel, Birgit and Orgzall, Ingo and Diez, Isabel and Xu, Chenggang}, title = {Aspects of morphology control during the oxidative synthesis of electrically conducting polymers}, issn = {0954-0083}, doi = {10.1177/0954008309339933}, year = {2009}, abstract = {The formation of micro- and nanostructures during the oxidative polymerization of polypyrrole and polyaniline is investigated using different sulfonic acid dopants. Rod- or tube-like structures are found in polypyrrole as well as in polyaniline without addition of further compounds to the initial reaction mixture of monomer, dopant and oxidant. In these cases, always a crystalline precursor complex composed of a dopand molecule and the pure monomer (aniline) or a trimeric moiety (pyrrole) serves as in-situ template. In most cases the surface of the growing polymer is covered by secondary structures with much smaller sizes so that a hierarchical order of structures at different length scales results. Corresponding model considerations for the polymerization process are outlined. Additionally, unusual structures like platelets, frames, rings, or ribbons are observed in the polypyrrole synthesis in the presence of fluorosurfactants.}, language = {en} } @article{SaracGencturkGilsingetal.2009, author = {Sarac, A. Sezai and Gencturk, Asli and Gilsing, Hans-Detlev and Schulz, Burkhard and Turhan, C. Metehan}, title = {Effect of electrolyte on the electropolymerization of 2,2-dibutyl-3,4-propylenedioxythiophene on carbon fiber microelectrodes}, issn = {1533-4880}, doi = {10.1166/Jnn.2009.027}, year = {2009}, abstract = {Electrocoating of 2,2 dibutylpropylene dioxythiophene on carbon fiber microelectrodes (CFMEs) in different electrolytes in acetonitrile was performed, and surface morphology and electrochemical impedance spectroscopic investigation has been carried out. Impedance spectra showed the typical form of Z(IM) versus Z(RE) for transmission- line at frequencies 10 Hz, with transition to almost pure capacitive behaviour down to 10 mHz (the lower limit of frequency scan).}, language = {en} } @article{SchulzOrgzallDiezetal.2010, author = {Schulz, Burkhard and Orgzall, Ingo and Diez, Isabel and Dietzel, Birgit and Tauer, Klaus}, title = {Template mediated formation of shaped polypyrrole particles}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2009.11.034}, year = {2010}, abstract = {The formation of different micro- and nanostructures during the chemical synthesis of polypyrrole is reviewed shortly based on the conceptions of hard- and soft-templating models. Contrary to other models that emphasize the role of micelles it is found here that during the oxidative polymerization of pyrole using sulfonic acid dopants a crystalline hard template is found in the first steps of the reaction before the addition of the oxidant. This template is formed by a complex consisting of 2,5-bis(pyrrole-2-yl)pyrrolidine and the sulfonic acid anion. The acid catalyzed formation of this specific tripyrrole is discussed. (C) 2009 Elsevier B.V. All rights reserved.}, language = {en} } @article{HoffmannDietzelSchulzetal.2011, author = {Hoffmann, Katrin and Dietzel, Birgit and Schulz, Burkhard and Reck, Guenter and Hoffmann, Angelika and Orgzall, Ingo and Resch-Genger, Ute and Emmerling, Franziska}, title = {Combined structural and fluorescence studies of methyl-substituted 2,5-diphenyl-1,3,4-oxadiazoles - Relation between electronic properties and packing motifs}, series = {Journal of molecular structure}, volume = {988}, journal = {Journal of molecular structure}, number = {1-3}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2010.11.071}, pages = {35 -- 46}, year = {2011}, abstract = {Prerequisite for the rational design of functional organic materials with tailor-made electronic properties is the knowledge of the structure-property relationship for the specific class of molecules under consideration. This encouraged us to systematically study the influence of the molecular structure and substitution pattern of aromatically substituted 1,3,4-oxadiazoles on the electronic properties and packing motifs of these molecules and on the interplay of these factors. For this purpose, seven diphenyl-oxadiazoles equipped with methyl substituents in the ortho- and meta-position(s) were synthesized and characterized. Absorption and fluorescence spectra in solution served here as tools to monitor substitution-induced changes in the electronic properties of the individual molecules whereas X-ray and optical measurements in the solid state provided information on the interplay of electronic and packing effects. In solution, the spectral position of the absorption maximum, the size of Stokes shift, and the fluorescence quantum yield are considerably affected by ortho-substitution in three or four ortho-positions. This results in blue shifted absorption bands, increased Stokes shifts, and reduced fluorescence quantum yields whereas the spectral position and vibrational structure of the emission bands remain more or less unaffected. In the crystalline state, however, the spectral position and shape of the emission bands display a strong dependence on the molecular structure and/or packing motifs that seem to control the amount of dye-dye-interactions. These observations reveal the limited value of commonly reported absorption and fluorescence measurements in solution for a straightforward comparison of spectroscopic results with single X-ray crystallography. This underlines the importance of solid state spectroscopic studies for a better understanding of the interplay of electronic effects and molecular order.}, language = {en} } @article{BanksNishiyamaHasebeetal.2011, author = {Banks, Jo Ann and Nishiyama, Tomoaki and Hasebe, Mitsuyasu and Bowman, John L. and Gribskov, Michael and dePamphilis, Claude and Albert, Victor A. and Aono, Naoki and Aoyama, Tsuyoshi and Ambrose, Barbara A. and Ashton, Neil W. and Axtell, Michael J. and Barker, Elizabeth and Barker, Michael S. and Bennetzen, Jeffrey L. and Bonawitz, Nicholas D. and Chapple, Clint and Cheng, Chaoyang and Correa, Luiz Gustavo Guedes and Dacre, Michael and DeBarry, Jeremy and Dreyer, Ingo and Elias, Marek and Engstrom, Eric M. and Estelle, Mark and Feng, Liang and Finet, Cedric and Floyd, Sandra K. and Frommer, Wolf B. and Fujita, Tomomichi and Gramzow, Lydia and Gutensohn, Michael and Harholt, Jesper and Hattori, Mitsuru and Heyl, Alexander and Hirai, Tadayoshi and Hiwatashi, Yuji and Ishikawa, Masaki and Iwata, Mineko and Karol, Kenneth G. and Koehler, Barbara and Kolukisaoglu, Uener and Kubo, Minoru and Kurata, Tetsuya and Lalonde, Sylvie and Li, Kejie and Li, Ying and Litt, Amy and Lyons, Eric and Manning, Gerard and Maruyama, Takeshi and Michael, Todd P. and Mikami, Koji and Miyazaki, Saori and Morinaga, Shin-ichi and Murata, Takashi and M{\"u}ller-R{\"o}ber, Bernd and Nelson, David R. and Obara, Mari and Oguri, Yasuko and Olmstead, Richard G. and Onodera, Naoko and Petersen, Bent Larsen and Pils, Birgit and Prigge, Michael and Rensing, Stefan A. and Mauricio Riano-Pachon, Diego and Roberts, Alison W. and Sato, Yoshikatsu and Scheller, Henrik Vibe and Schulz, Burkhard and Schulz, Christian and Shakirov, Eugene V. and Shibagaki, Nakako and Shinohara, Naoki and Shippen, Dorothy E. and Sorensen, Iben and Sotooka, Ryo and Sugimoto, Nagisa and Sugita, Mamoru and Sumikawa, Naomi and Tanurdzic, Milos and Theissen, Guenter and Ulvskov, Peter and Wakazuki, Sachiko and Weng, Jing-Ke and Willats, William W. G. T. and Wipf, Daniel and Wolf, Paul G. and Yang, Lixing and Zimmer, Andreas D. and Zhu, Qihui and Mitros, Therese and Hellsten, Uffe and Loque, Dominique and Otillar, Robert and Salamov, Asaf and Schmutz, Jeremy and Shapiro, Harris and Lindquist, Erika and Lucas, Susan and Rokhsar, Daniel and Grigoriev, Igor V.}, title = {The selaginella genome identifies genetic changes associated with the evolution of vascular plants}, series = {Science}, volume = {332}, journal = {Science}, number = {6032}, publisher = {American Assoc. for the Advancement of Science}, address = {Washington}, issn = {0036-8075}, doi = {10.1126/science.1203810}, pages = {960 -- 963}, year = {2011}, abstract = {Vascular plants appeared similar to 410 million years ago, then diverged into several lineages of which only two survive: the euphyllophytes (ferns and seed plants) and the lycophytes. We report here the genome sequence of the lycophyte Selaginella moellendorffii (Selaginella), the first nonseed vascular plant genome reported. By comparing gene content in evolutionarily diverse taxa, we found that the transition from a gametophyte- to a sporophyte-dominated life cycle required far fewer new genes than the transition from a nonseed vascular to a flowering plant, whereas secondary metabolic genes expanded extensively and in parallel in the lycophyte and angiosperm lineages. Selaginella differs in posttranscriptional gene regulation, including small RNA regulation of repetitive elements, an absence of the trans-acting small interfering RNA pathway, and extensive RNA editing of organellar genes.}, language = {en} } @article{TurhanSaracGencturketal.2012, author = {Turhan, Metehan C. and Sarac, A. Sezai and Gencturk, Asli and Gilsing, Hans-Detlev and Faltz, Heike and Schulz, Burkhard}, title = {Electrochemical impedance characterization and potential dependence of poly[3,4-(2,2-dibutylpropylenedioxy)thiophene] nanostructures on single carbon fiber microelectrode}, series = {Synthetic metals : the journal of electronic polymers and electronic molecular materials}, volume = {162}, journal = {Synthetic metals : the journal of electronic polymers and electronic molecular materials}, number = {5-6}, publisher = {Elsevier}, address = {Lausanne}, issn = {0379-6779}, doi = {10.1016/j.synthmet.2012.01.012}, pages = {511 -- 515}, year = {2012}, abstract = {The electropolymerization of 3,4-(2,2-dibutylpropylenedioxy)thiophene (ProDOT-Bu-2) onto single carbon fiber microelectrode (SCFME) was conducted in acetonitrile (ACN) containing sodium perchlorate (NaClO4) as electrolyte and investigated by cyclic voltammetry (CV). The nanostructured films of poly[3,4-(2,2-dibutyl-propyleneclioxy)thiophene] (PProDOT-Bu-2) which were depositing showed complete reversible redox behavior in monomer-free electrolyte solution. The capacitive behavior of the films was investigated by electrochemical impedance spectroscopy (EIS) at applied potentials from 0.1 V to 1.3 V. The analysis by equivalent circuit modeling revealed an applied potential around 0.4V to be most suitable for the system PProDOT-Bu-2/SCFME as a double layer supercapacitor component inducing a double layer capacitance C-d, value of 62 mFcm(-2).}, language = {en} } @article{GulerGilsingSchulzetal.2012, author = {Guler, Fatma G. and Gilsing, Hans-Detlev and Schulz, Burkhard and Sarac, A. Sezai}, title = {Impedance and morphology of hydroxy- and chloro-functionalized poly(3,4-propylenedioxythiophene) nanostructures}, series = {Journal of nanoscience and nanotechnolog}, volume = {12}, journal = {Journal of nanoscience and nanotechnolog}, number = {10}, publisher = {American Scientific Publ.}, address = {Valencia}, issn = {1533-4880}, doi = {10.1166/jnn.2012.6594}, pages = {7869 -- 7878}, year = {2012}, abstract = {The new 3,4-propylenedioxythiophenes (ProDOT) bearing hydroxy- or chloro-functionalized side chains of varying length and polarity were synthesized and electropolymerized on single carbon fiber microelectrode (SCFME) using cyclo-voltammetry. Electrochemical impedance spectroscopy (EIS) revealed highest capacitance values for the hydroxy-functionalized Poly 5 carrying a side chain of medium length. The EIS data were fitted with an equivalent electrical circuit giving a good correlation. AFM analysis of the topography showed higher roughness values for Poly 5 than for the two other polymers bearing longer side chains. Due to their reactive end groups the polymers should be useful for post-polymerization functionalization of the electrode surface.}, language = {en} } @article{EmmerlingOrgzallDietzeletal.2012, author = {Emmerling, Franziska and Orgzall, Ingo and Dietzel, Birgit and Schulz, Burkhard and Larrucea, Julen}, title = {Ordering the amorphous - Structures in PBD LED materials}, series = {Journal of molecular structure}, volume = {1030}, journal = {Journal of molecular structure}, number = {23}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0022-2860}, doi = {10.1016/j.molstruc.2012.04.040}, pages = {209 -- 215}, year = {2012}, abstract = {The class of 2,5 disubstituted-1,3,4-oxadiazoles containing a biphenyl unit on one side is intensively used as electron transport materials to enhance the performance of organic light emitting diodes (OLEDs). In contrast to the ongoing research on these materials insights in their structure-property relationships are still incomplete. To overcome the structural tentativeness and ambiguities the crystal structures of 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole, that of the related compound 2-(4-biphenylyl)-5-phenyl-1,3,4-oxadiazole and of 2-(4-biphenylyl)-5-(2,6-dimethylphenyl)-1,3,4-oxadiazole are determined. A comparison with the results of GAUSSIAN03 calculations and similar compounds in the Cambridge Structural Database leads to a profound characterization.}, language = {en} } @article{SarauliXuDietzeletal.2012, author = {Sarauli, David and Xu, Chenggang and Dietzel, Birgit and Stiba, Konstanze and Leimk{\"u}hler, Silke and Schulz, Burkhard and Lisdat, Fred}, title = {Thin films of substituted polyanilines interactions with biomolecular systems}, series = {Soft matter}, volume = {8}, journal = {Soft matter}, number = {14}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1744-683X}, doi = {10.1039/c2sm07261k}, pages = {3848 -- 3855}, year = {2012}, abstract = {We use substituted polyanilines for the construction of new polymer electrodes for interaction studies with the redox protein cytochrome c (cyt c) and the enzyme sulfite oxidase (SO). For these purposes four different polyaniline copolymers are chemically synthesized. Three of them are copolymers, containing 2-methoxyaniline-5-sulfonic acid with variable ratios of aniline; the fourth copolymer consists of 3-amino-benzoic acid and aniline. The results show that all polymers are suitable for being immobilized as thin stable films on gold wire and indium tin oxide (ITO) electrode surfaces from DMSO solution. This can be demonstrated by cyclic voltammetry and UV-Vis spectroscopy measurements. Moreover, cyt c can be electrochemically detected not only in solution, but also immobilized on top of the polymer films. Furthermore, the appearance of a significant catalytic current has been demonstrated for the sulfonated polyanilines, when the polymer-coated protein electrode is being measured upon addition of sulfite oxidase, confirming the establishment of a bioanalytical signal chain. Best results have been obtained for the polymer with highest sulfonation grade. The redox switching of the polymer by the enzymatic reaction can also be analyzed by following the spectral properties of the polymer electrode.}, language = {en} } @article{SarauliXuDietzeletal.2013, author = {Sarauli, David and Xu, Chenggang and Dietzel, Birgit and Schulz, Burkhard and Lisdat, Fred}, title = {Differently substituted sulfonated polyanilines - the role of polymer compositions in electron transfer with pyrroloquinoline quinone-dependent glucose dehydrogenase}, series = {Acta biomaterialia}, volume = {9}, journal = {Acta biomaterialia}, number = {9}, publisher = {Elsevier}, address = {Oxford}, issn = {1742-7061}, doi = {10.1016/j.actbio.2013.06.008}, pages = {8290 -- 8298}, year = {2013}, abstract = {Sulfonated polyanilines have become promising building blocks in the construction of biosensors, and therefore we use here differently substituted polymer forms to investigate the role of their structural composition and properties in achieving a direct electron transfer with the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH). To this end, new copolymers containing different ratios of 2-methoxyaniline-5-sulfonic acid (MAS), 3-aminobenzenesulfonic acid (ABS) and 3-aminobenzoic acid (AB) units have been chemically synthesized. All polymers have been studied with respect to their ability to react directly with PQQ-GDH. This interaction has been monitored initially in solution, and subsequently on electrode surfaces. The results show that only copolymers with MAS and aniline units can directly react with PQQ-GDH in solution; the background can be mainly ascribed to the emeraldine salt redox state of the polymer, allowing rather easy reduction. However, when polymers and the enzyme are immobilized on the surface of carbon nanotube-containing electrodes, direct bioelectrocatalysis is also feasible in the case of copolymers composed of ABS/AB and MAS/AB units, existing initially in pernigraniline base form. This verifies that a productive interaction of the enzyme with differently substituted polymers is feasible when the electrode potential can be used to drive the reaction towards the oxidation of the substrate-reduced enzyme. These results clearly demonstrate that enzyme electrodes based on sulfonated polyanilines and direct bioelectrocatalysis can be successfully constructed.}, language = {en} } @article{SarauliXuDietzeletal.2014, author = {Sarauli, David and Xu, Chenggang and Dietzel, Birgit and Schulz, Burkhard and Lisdat, Fred}, title = {A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase: tunable direct bioelectrocatalysis}, series = {Journal of materials chemistry : B, Materials for biology and medicine}, volume = {2}, journal = {Journal of materials chemistry : B, Materials for biology and medicine}, number = {21}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {2050-750X}, doi = {10.1039/c4tb00336e}, pages = {3196 -- 3203}, year = {2014}, abstract = {A feasible approach to construct multilayer films of sulfonated polyanilines - PMSA1 and PABMSA1 containing different ratios of aniline, 2-methoxyaniline-5-sulfonic acid (MAS) and 3-aminobenzoic acid (AB), with the entrapped redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on Au and ITO electrode surfaces, is described. The formation of layers has been followed and confirmed by electrochemical impedance spectroscopy (EIS), which demonstrates that the multilayer assembly can be achieved in a progressive and uniform manner. The gold and ITO electrodes subsequently modified with PMSA1:PQQ-GDH and PABMSA1 films are studied by cyclic voltammetry (CV) and UV-Vis spectroscopy which show a significant direct bioelectrocatalytical response to the oxidation of the substrate glucose without any additional mediator. This response correlates linearly with the number of deposited layers. Furthermore, the constructed polymer/enzyme multilayer system exhibits a rather good long-term stability, since the catalytic current response is maintained for more than 60\% of the initial value even after two weeks of storage. This verifies that a productive interaction of the enzyme embedded in the film of substituted polyaniline can be used as a basis for the construction of bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction.}, language = {en} } @article{SarauliPetersXuetal.2014, author = {Sarauli, David and Peters, Kristina and Xu, Chenggang and Schulz, Burkhard and Fattakhova-Rohlfing, Dina and Lisdat, Fred}, title = {3D-Electrode architectures for enhanced direct bioelectrocatalysis of pyrroloquinoline quinone-dependent glucose dehydrogenase}, series = {ACS applied materials \& interfaces}, volume = {6}, journal = {ACS applied materials \& interfaces}, number = {20}, publisher = {American Chemical Society}, address = {Washington}, issn = {1944-8244}, doi = {10.1021/am5046026}, pages = {17887 -- 17893}, year = {2014}, abstract = {We report on the fabrication of a complex electrode architecture for efficient direct bioelectrocatalysis. In the developed procedure, the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase entrapped in a sulfonated polyaniline [poly(2-methoxyaniline-5-sulfonic acid)-co-aniline] was immobilized on macroporous indium tin oxide (macroITO) electrodes. The use of the 3D-conducting scaffold with a large surface area in combination with the conductive polymer enables immobilization of large amounts of enzyme and its efficient communication with the electrode, leading to enhanced direct bioelectrocatalysis. In the presence of glucose, the fabricated bioelectrodes show an exceptionally high direct bioelectrocatalytical response without any additional mediator. The catalytic current is increased more than 200-fold compared to planar ITO electrodes. Together with a high long-term stability (the current response is maintained for >90\% of the initial value even after 2 weeks of storage), the transparent 3D macroITO structure with a conductive polymer represents a valuable basis for the construction of highly efficient bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction.}, language = {en} } @article{SchoeneSchulzRichauetal.2014, author = {Sch{\"o}ne, Anne-Christin and Schulz, Burkhard and Richau, Klaus and Kratz, Karl and Lendlein, Andreas}, title = {Characterization of Langmuir films prepared from copolyesterurethanes based on oligo(omega-pentadecalactone) and oligo(epsilon-caprolactone)segments}, series = {Macromolecular chemistry and physics}, volume = {215}, journal = {Macromolecular chemistry and physics}, number = {24}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1022-1352}, doi = {10.1002/macp.201400377}, pages = {2437 -- 2445}, year = {2014}, abstract = {A series of multiblock copolymers (PDLCL) synthesized from oligo(omega-pentadecalactone) diol (OPDL) and oligo(epsilon-caprolactone) diol (OCL), which are linked by 2,2(4), 4-trimethyl-hexamethylene diisocyanate (TMDI), is investigated by the Langmuir monolayer technique at the air-water interface. Brewster angle microscopy (BAM) and spectroscopic ellipsometry are employed to characterize the polymer film morphologies in situ. PDLCL containing >= 40 wt\% OCL segments form homogeneous Langmuir monofilms after spreading. The film elasticity modulus decreases with increasing amounts of OPDL segments in the copolymer. In contrast, the OCL-free polyesterurethane OPDL-TMDI cannot be spread to monomolecular films on the water surface properly, and movable slabs are observed by BAM even at low surface pressures. The results of the in situ morphological characterization clearly show that essential information concerning the reliability of Langmuir monolayer degradation (LMD) experiments cannot be obtained from the evaluation of the pi-A isotherms only. Consequently, in situ morphological characterization turns out to be indispensable for characterization of Langmuir layers before LMD experiments.}, language = {en} } @misc{SarauliXuDietzeletal.2014, author = {Sarauli, David and Xu, Chenggang and Dietzel, Birgit and Schulz, Burkhard and Lisdat, Fred}, title = {A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-98744}, year = {2014}, abstract = {A feasible approach to construct multilayer films of sulfonated polyanilines - PMSA1 and PABMSA1 - containing different ratios of aniline, 2-methoxyaniline-5-sulfonic acid (MAS) and 3-aminobenzoic acid (AB), with the entrapped redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) on Au and ITO electrode surfaces, is described. The formation of layers has been followed and confirmed by electrochemical impedance spectroscopy (EIS), which demonstrates that the multilayer assembly can be achieved in a progressive and uniform manner. The gold and ITO electrodes subsequently modified with PMSA1:PQQ-GDH and PABMSA1 films are studied by cyclic voltammetry (CV) and UV-Vis spectroscopy which show a significant direct bioelectrocatalytical response to the oxidation of the substrate glucose without any additional mediator. This response correlates linearly with the number of deposited layers. Furthermore, the constructed polymer/enzyme multilayer system exhibits a rather good long-term stability, since the catalytic current response is maintained for more than 60\% of the initial value even after two weeks of storage. This verifies that a productive interaction of the enzyme embedded in the film of substituted polyaniline can be used as a basis for the construction of bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction.}, language = {en} } @article{JetzschmannJagerszkiDechtriratetal.2015, author = {Jetzschmann, Katharina J. and Jagerszki, Gyula and Dechtrirat, Decha and Yarman, Aysu and Gajovic-Eichelmann, Nenad and Gilsing, Hans-Detlev and Schulz, Burkhard and Gyurcsanyi, Robert E. and Scheller, Frieder W.}, title = {Vectorially Imprinted Hybrid Nanofilm for Acetylcholinesterase Recognition}, series = {Advanced functional materials}, volume = {25}, journal = {Advanced functional materials}, number = {32}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1616-301X}, doi = {10.1002/adfm.201501900}, pages = {5178 -- 5183}, year = {2015}, abstract = {Effective recognition of enzymatically active tetrameric acetylcholinesterase (AChE) is accomplished by a hybrid nanofilm composed of a propidium-terminated self-assembled monolayer (Prop-SAM) which binds AChE via its peripheral anionic site (PAS) and an ultrathin electrosynthesized molecularly imprinted polymer (MIP) cover layer of a novel carboxylate-modified derivative of 3,4-propylenedioxythiophene. The rebinding of the AChE to the MIP/Prop-SAM nanofilm covered electrode is detected by measuring in situ the enzymatic activity. The oxidative current of the released thiocholine is dependent on the AChE concentration from approximate to 0.04 x 10(-6) to 0.4 x 10(-6)m. An imprinting factor of 9.9 is obtained for the hybrid MIP, which is among the best values reported for protein imprinting. The dissociation constant characterizing the strength of the MIP-AChE binding is 4.2 x 10(-7)m indicating the dominant role of the PAS-Prop-SAM interaction, while the benefit of the MIP nanofilm covering the Prop-SAM layer is the effective suppression of the cross-reactivity toward competing proteins as compared with the Prop-SAM. The threefold selectivity gain provided by i) the shape-specific MIP filter, ii) the propidium-SAM, iii) signal generation only by the AChE bound to the nanofilm shows promise for assessing AChE activity levels in cerebrospinal fluid.}, language = {en} } @article{SchoeneRichauKratzetal.2015, author = {Sch{\"o}ne, Anne-Christin and Richau, Klaus and Kratz, Karl and Schulz, Burkhard and Lendlein, Andreas}, title = {Influence of Diurethane Linkers on the Langmuir Layer Behavior of Oligo[(rac-lactide)-co-glycolide]-based Polyesterurethanes}, series = {Macromolecular rapid communications}, volume = {36}, journal = {Macromolecular rapid communications}, number = {21}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1022-1336}, doi = {10.1002/marc.201500316}, pages = {1910 -- 1915}, year = {2015}, abstract = {Three oligo[(rac-lactide)-co-glycolide] based polyesterurethanes (OLGA-PUs) containing different diurethane linkers are investigated by the Langmuir monolayer technique and compared to poly[(rac-lactide)-co-glycolide] (PLGA) to elucidate the influence of the diurethane junction units on hydrophilicity and packing motifs of these polymers at the air-water interface. The presence of diurethane linkers does not manifest itself in the Langmuir layer behavior both in compression and expansion experiments when monomolecular films of OLGA-PUs are spread on the water surface. However, the linker retard the evolution of morphological structures at intermediate compression level under isobaric conditions (with a surface pressure greater than 11 mN m(-1)) compared to the PLGA, independent on the chemical structure of the diurethane moiety. The layer thicknesses of both OLGA-PU and PLGA films decrease in the high compression state with decreasing surface pressure, as deduced from ellipsometric data. All films must be described with the effective medium approximation as water swollen layers.}, language = {en} } @article{TanneJeoungPengetal.2015, author = {Tanne, Johannes and Jeoung, Jae-Hun and Peng, Lei and Yarman, Aysu and Dietzel, Birgit and Schulz, Burkhard and Schad, Daniel and Dobbek, Holger and Wollenberger, Ursula and Bier, Frank Fabian and Scheller, Frieder W.}, title = {Direct Electron Transfer and Bioelectrocatalysis by a Hexameric, Heme Protein at Nanostructured Electrodes}, series = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, volume = {27}, journal = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, number = {10}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1040-0397}, doi = {10.1002/elan.201500231}, pages = {2262 -- 2267}, year = {2015}, abstract = {A nanohybrid consisting of poly(3-aminobenzenesulfonic acid-co-aniline) and multiwalled carbon nanotubes [MWCNT-P(ABS-A)]) on a gold electrode was used to immobilize the hexameric tyrosine-coordinated heme protein (HTHP). The enzyme showed direct electron transfer between the heme group of the protein and the nanostructured surface. Desorption of the noncovalently bound heme from the protein could be excluded by control measurements with adsorbed hemin on aminohexanthiol-modified electrodes. The nanostructuring and the optimised charge characteristics resulted in a higher protein coverage as compared with MUA/MU modified electrodes. The adsorbed enzyme shows catalytic activity for the cathodic H2O2 reduction and oxidation of NADH.}, language = {en} } @article{RottkeSchulzRichauetal.2016, author = {Rottke, Falko O. and Schulz, Burkhard and Richau, Klaus and Kratz, Karl and Lendlein, Andreas}, title = {An ellipsometric approach towards the description of inhomogeneous polymer-based Langmuir layers}, series = {Beilstein journal of nanotechnology}, volume = {7}, journal = {Beilstein journal of nanotechnology}, publisher = {Beilstein-Institut zur F{\~A}\Prderung der Chemischen Wissenschaften}, address = {Frankfurt, Main}, issn = {2190-4286}, doi = {10.3762/bjnano.7.107}, pages = {1156 -- 1165}, year = {2016}, abstract = {The applicability of nulling-based ellipsometric mapping as a complementary method next to Brewster angle microscopy (BAM) and imaging ellipsometry (IE) is presented for the characterization of ultrathin films at the air-water interface. First, the methodology is demonstrated for a vertically nonmoving Langmuir layer of star-shaped, 4-arm poly(omega-pentadecalactone) (PPDL-D4). Using nulling-based ellipsometric mapping, PPDL-D4-based inhomogeneously structured morphologies with a vertical dimension in the lower nm range could be mapped. In addition to the identification of these structures, the differentiation between a monolayer and bare water was possible. Second, the potential and limitations of this method were verified by applying it to more versatile Langmuir layers of telechelic poly[(rac-lactide)-co-glycolide]-diol (PLGA). All ellipsometric maps were converted into thickness maps by introduction of the refractive index that was derived from independent ellipsometric experiments, and the result was additionally evaluated in terms of the root mean square roughness, R-q. Thereby, a three-dimensional view into the layers was enabled and morphological inhomogeneity could be quantified.}, language = {en} }