@article{MondalDeyAttallahetal.2017,
  author    = {Mondal, Suvendu Sekhar and Dey, Subarna and Attallah, Ahmed G. and Krause-Rehberg, Reinhard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Insights into the pores of microwave-assisted metal-imidazolate frameworks showing enhanced gas sorption},
  series = {Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry},
  volume    = {46},
  journal   = {Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1477-9226},
  doi       = {10.1039/c7dt00350a},
  pages     = {4824 -- 4833},
  year      = {2017},
  abstract  = {Microwave heating (MW)-assisted synthesis has been widely applied as an alternative method for the chemical synthesis of organic and inorganic materials. In this work, we report MW-assisted synthesis of three isostructural 3D frameworks with a flexible linker arm of the chelating linker 2-substituted imidazolate- 4-amide-5-imidate, named IFP-7-MW (M = Zn, R = OMe), IFP-8-MW (M = Co; R = OMe) and IFP-10-MW (M = Co; R = OEt) (IFP = Imidazolate Framework Potsdam). These chelating ligands were generated in situ by partial hydrolysis of 2-substituted 4,5-dicyanoimidazoles under MW-and also conventional electrical heating (CE)-assisted conditions in DMF. The structure of these materials was determined by IR spectroscopy and powder X-ray diffraction (PXRD) and the identity of the materials synthesized under CE-conditions was established. Materials obtained from MW-heating show many fold enhancement of CO2 and H-2 uptake capacities, compared to the analogous CE-heating method based materials. To understand the inner pore-sizes of IFP structures and variations of gas sorptions, we performed positron annihilation lifetime spectroscopy (PALS), which shows that MW-assisted materials have smaller pore sizes than materials synthesized under CE-conditions. The "kinetically controlled" MW-synthesized material has an inherent ability to trap extra linkers, thereby reducing the pore sizes of CE-materials to ultra/micropores. These ultramicropores are responsible for high gas sorption.},
  language  = {en}
}
@article{MondalKreuzerBehrensetal.2019,
  author    = {Mondal, Suvendu Sekhar and Kreuzer, Alex and Behrens, Karsten and Sch{\"u}tz, Gisela and Holdt, Hans-J{\"u}rgen and Hirscher, Michael},
  title     = {Systematic experimental study on quantum sieving of hydrogen isotopes in metal-amide-imidazolate frameworks with narrow 1-D channels},
  series = {ChemPhysChem : a European journal of chemical physics and physical chemistry},
  volume    = {20},
  journal   = {ChemPhysChem : a European journal of chemical physics and physical chemistry},
  number    = {10},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1439-4235},
  doi       = {10.1002/cphc.201900183},
  pages     = {1311 -- 1315},
  year      = {2019},
  abstract  = {Quantum sieving of hydrogen isotopes is experimentally studied in isostructural hexagonal metal-organic frameworks having 1-D channels, named IFP-1, -3, -4 and -7. Inside the channels, different molecules or atoms restrict the channel diameter periodically with apertures larger (4.2 angstrom for IFP-1, 3.1 angstrom for IFP-3) and smaller (2.1 angstrom for IFP-7, 1.7 angstrom for IFP-4) than the kinetic diameter of hydrogen isotopes. From a geometrical point of view, no gas should penetrate into IFP-7 and IFP-4, but due to the thermally induced flexibility, so-called gate-opening effect of the apertures, penetration becomes possible with increasing temperature. Thermal desorption spectroscopy (TDS) measurements with pure H-2 or D-2 have been applied to study isotope adsorption. Further TDS experiments after exposure to an equimolar H-2/D-2 mixture allow to determine directly the selectivity of isotope separation by quantum sieving. IFP-7 shows a very low selectivity not higher than S=2. The selectivity of the materials with the smallest pore aperture IFP-4 has a constant value of S approximate to 2 for different exposure times and pressures, which can be explained by the 1-D channel structure. Due to the relatively small cavities between the apertures of IFP-4 and IFP-7, molecules in the channels cannot pass each other, which leads to a single-file filling. Therefore, no time dependence is observed, since the quantum sieving effect occurs only at the outermost pore aperture, resulting in a low separation selectivity.},
  language  = {en}
}
@article{OtterMondalAlrefaietal.2021,
  author    = {Otter, Dirk and Mondal, Suvendu Sekhar and Alrefai, Anas and Kr{\"a}tz, Lorenz and Holdt, Hans-J{\"u}rgen and Bart, Hans-J{\"o}rg},
  title     = {Characterization of an isostructural MOF series of Imidazolate Frameworks Potsdam by means of sorption experiments with water vapor},
  series = {Nanomaterials},
  volume    = {11},
  journal   = {Nanomaterials},
  number    = {6},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2079-4991},
  doi       = {10.3390/nano11061400},
  pages     = {20},
  year      = {2021},
  abstract  = {Sorption measurements of water vapor on an isoreticular series of Imidazolate Frameworks Potsdam (IFP), based on penta-coordinated metal centers with secondary building units (SBUs) connected by multidentate amido-imidate-imidazolate linkers, have been carried out at 303.15 K. The isotherm shapes were analyzed in order to gain insight into material properties and compared to sorption experiments with nitrogen at 77.4 K and carbon dioxide at 273.15 K. Results show that water vapor sorption measurements are strongly influenced by the pore size distribution while having a distinct hysteresis loop between the adsorption and desorption branch in common. Thus, IFP-4 and -8, which solely contain micropores, exhibit H4 (type I) isotherm shapes, while those of IFP-1, -2 and -5, which also contain mesopores, are of H3 (type IV) shape with three inflection points. The choice of the used linker substituents and transition metals employed in the framework has a tremendous effect on the material properties and functionality. The water uptake capacities of the examined IFPs are ranging 0.48 mmol g(-1) (IFP-4) to 6.99 mmol g(-1) (IFP-5) and comparable to those documented for ZIFs. The water vapor stability of IFPs is high, with the exception of IFP-8.},
  language  = {en}
}
@article{AlrefaiMondalWrucketal.2019,
  author    = {Alrefai, Anas and Mondal, Suvendu Sekhar and Wruck, Alexander and Kelling, Alexandra and Schilde, Uwe and Brandt, Philipp and Janiak, Christoph and Schoenfeld, Sophie and Weber, Birgit and Rybakowski, Lawrence and Herrman, Carmen and Brennenstuhl, Katlen and Eidner, Sascha and Kumke, Michael Uwe and Behrens, Karsten and G{\"u}nter, Christina and M{\"u}ller, Holger and Holdt, Hans-J{\"u}rgen},
  title     = {Hydrogen-bonded supramolecular metal-imidazolate frameworks: gas sorption, magnetic and UV/Vis spectroscopic properties},
  series = {Journal of Inclusion Phenomena and Macrocyclic Chemistry},
  volume    = {94},
  journal   = {Journal of Inclusion Phenomena and Macrocyclic Chemistry},
  number    = {3-4},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1388-3127},
  doi       = {10.1007/s10847-019-00926-6},
  pages     = {155 -- 165},
  year      = {2019},
  abstract  = {By varying reaction parameters for the syntheses of the hydrogen-bonded metal-imidazolate frameworks (HIF) HIF-1 and HIF-2 (featuring 14 Zn and 14 Co atoms, respectively) to increase their yields and crystallinity, we found that HIF-1 is generated in two different frameworks, named as HIF-1a and HIF-1b. HIF-1b is isostructural to HIF-2. We determined the gas sorption and magnetic properties of HIF-2. In comparison to HIF-1a (Brunauer-Emmett-Teller (BET) surface area of 471m(2) g(-1)), HIF-2 possesses overall very low gas sorption uptake capacities [BET(CO2) surface area=85m(2) g(-1)]. Variable temperature magnetic susceptibility measurement of HIF-2 showed antiferromagnetic exchange interactions between the cobalt(II) high-spin centres at lower temperature. Theoretical analysis by density functional theory confirmed this finding. The UV/Vis-reflection spectra of HIF-1 (mixture of HIF-1a and b), HIF-2 and HIF-3 (with 14 Cd atoms) were measured and showed a characteristic absorption band centered at 340nm, which was indicative for differences in the imidazolate framework.},
  language  = {en}
}
@article{MondalBehrensMatthesetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Matthes, Philipp R. and Sch{\"o}nfeld, Fabian and Nitsch, J{\"o}rn and Steffen, Andreas and Primus, Philipp-Alexander and Kumke, Michael Uwe and M{\"u}ller-Buschbaum, Klaus and Holdt, Hans-J{\"u}rgen},
  title     = {White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+},
  series = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  volume    = {18},
  journal   = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  number    = {3},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2050-7534},
  doi       = {10.1039/C4TC02919D},
  pages     = {4623 -- 4631},
  year      = {2015},
  abstract  = {Co-doping of the MOF 3∞[Zn(2-methylimidazolate-4-amide-5-imidate)] (IFP-1 = Imidazolate Framework Potsdam-1) with luminescent Eu3+ and Tb3+ ions presents an approach to utilize the porosity of the MOF for the intercalation of luminescence centers and for tuning of the chromaticity to the emission of white light of the quality of a three color emitter. Organic based fluorescence processes of the MOF backbone as well as metal based luminescence of the dopants are combined to one homogenous single source emitter while retaining the MOF's porosity. The lanthanide ions Eu3+ and Tb3+ were doped in situ into IFP-1 upon formation of the MOF by intercalation into the micropores of the growing framework without a structure directing effect. Furthermore, the color point is temperature sensitive, so that a cold white light with a higher blue content is observed at 77 K and a warmer white light at room temperature (RT) due to the reduction of the organic emission at higher temperatures. The study further illustrates the dependence of the amount of luminescent ions on porosity and sorption properties of the MOF and proves the intercalation of luminescence centers into the pore system by low-temperature site selective photoluminescence spectroscopy, SEM and EDX. It also covers an investigation of the border of homogenous uptake within the MOF pores and the formation of secondary phases of lanthanide formates on the surface of the MOF. Crossing the border from a homogenous co-doping to a two-phase composite system can be beneficially used to adjust the character and warmth of the white light. This study also describes two-color emitters of the formula Ln@IFP-1a-d (Ln: Eu, Tb) by doping with just one lanthanide Eu3+ or Tb3+.},
  language  = {en}
}
@article{MondalBehrensMatthesetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Matthes, Philipp R. and Sch{\"o}nfeld, Fabian and Nitsch, J{\"o}rn and Steffen, Andreas and Primus, Philipp-Alexander and Kumke, Michael Uwe and M{\"u}ller-Buschbaum, Klaus and Holdt, Hans-J{\"u}rgen},
  title     = {White light emission of IFP-1 by in situ co-doping of the MOF pore system with Eu3+ and Tb3+},
  series = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  volume    = {3},
  journal   = {Journal of materials chemistry : C, Materials for optical and electronic devices},
  number    = {18},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {2050-7526},
  doi       = {10.1039/c4tc02919d},
  pages     = {4623 -- 4631},
  year      = {2015},
  language  = {en}
}
@article{MondalMarquardtJaniaketal.2016,
  author    = {Mondal, Suvendu Sekhar and Marquardt, Dorothea and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Use of a 4,5-dicyanoimidazolate anion based ionic liquid for the synthesis of iron and silver nanoparticles},
  series = {Dalton transactions : an international journal of inorganic chemistry},
  journal   = {Dalton transactions : an international journal of inorganic chemistry},
  number    = {45},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1477-9226},
  doi       = {10.1039/C6DT00225K},
  pages     = {5476 -- 5483},
  year      = {2016},
  abstract  = {Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N′-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures.},
  language  = {en}
}
@article{MondalBhuniaKellingetal.2014,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {A supramolecular Co(II)₁₄-metal-organic cube in a hydrogen-bonded network and a Co(II)-organic framework with a flexible methoxy substituent},
  series = {Chemical communications : ChemComm},
  volume    = {2014},
  journal   = {Chemical communications : ChemComm},
  number    = {41},
  publisher = {Royal Society of Chemistry},
  issn      = {2046-2069},
  doi       = {10.1039/c3cc49698h},
  pages     = {5441 -- 5443},
  year      = {2014},
  abstract  = {The reaction of 4,5-dicyano-2-methoxyimidazole (L1) with Co(NO3)2·6H2O under solvothermal conditions in DMF, a MOF, IFP-8 and a hydrogen-bonded network consisting of tetradecanuclear Co(II)14-metal organic cube (1) are achieved. 1 shows the bcu net with 14 cobalt atoms.},
  language  = {en}
}
@article{DebatinMoellmerMondaletal.2012,
  author    = {Debatin, Franziska and M{\"o}llmer, Jens and Mondal, Suvendu Sekhar and Behrens, Karsten and M{\"o}ller, Andreas and Staudt, Reiner and Thomas, Arne and Holdt, Hans-J{\"u}rgen},
  title     = {Mixed gas adsorption of carbon dioxide and methane on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates},
  series = {Journal of materials chemistry},
  volume    = {22},
  journal   = {Journal of materials chemistry},
  number    = {20},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {0959-9428},
  doi       = {10.1039/c2jm15811f},
  pages     = {10221 -- 10227},
  year      = {2012},
  abstract  = {In this work the adsorption of CO2 and CH4 on a series of isoreticular microporous metal-organic frameworks based on 2-substituted imidazolate-4-amide-5-imidates, IFP-1-IFP-6 (IFP Imidazolate Framework Potsdam), is studied firstly by pure gas adsorption at 273 K. All experimental isotherms can be nicely described by using the Toth isotherm model and show the preferred adsorption of CO2 over CH4. At low pressures the Toth isotherm equation exhibits a Henry region, wherefore Henry's law constants for CO2 and CH4 uptake could be determined and ideal selectivity (alpha CO2/CH4) has been calculated. Secondly, selectivities were calculated from mixture data by using nearly equimolar binary mixtures of both gases by a volumetric-chromatographic method to examine the IFPs. Results showed the reliability of the selectivity calculation. Values of (alpha CO2/CH4) around 7.5 for IFP-5 indicate that this material shows much better selectivities than IFP-1, IFP-2, IFP-3, IFP-4 and IFP-6 with slightly lower selectivity (alpha CO2/CH4) = 4-6. The preferred adsorption of CO2 over CH4 especially of IFP-5 and IFP-4 makes these materials suitable for gas separation application.},
  language  = {en}
}
@article{MondalDeyBaburinetal.2013,
  author    = {Mondal, Suvendu Sekhar and Dey, Subarna and Baburin, Igor A. and Kelling, Alexandra and Schilde, Uwe and Seifert, Gotthard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Syntheses of two imidazolate-4-amide-5-imidate linker-based hexagonal metal-organic frameworks with flexible ethoxy substituent},
  series = {CrystEngComm},
  volume    = {15},
  journal   = {CrystEngComm},
  number    = {45},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1466-8033},
  doi       = {10.1039/c3ce41632a},
  pages     = {9394 -- 9399},
  year      = {2013},
  abstract  = {A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H-2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.},
  language  = {en}
}
@article{MondalBhuniaBaburinetal.2013,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Baburin, Igor A. and J{\"a}ger, Christian and Kelling, Alexandra and Schilde, Uwe and Seifert, Gotthard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Gate effects in a hexagonal zinc-imidazolate-4-amide-5-imidate framework with flexible methoxy substituents and CO2 selectivity},
  series = {Chemical communications},
  volume    = {49},
  journal   = {Chemical communications},
  number    = {69},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1359-7345},
  doi       = {10.1039/c3cc42156b},
  pages     = {7599 -- 7601},
  year      = {2013},
  abstract  = {A new imidazolate-4-amide-5-imidate based MOF, IFP-7, is generated, having flexible methoxy groups, which act as molecular gates for guest molecules. This allows highly selective CO2 sorption over N-2 and CH4 gases.},
  language  = {en}
}
@article{MondalDeyBaburinetal.2008,
  author    = {Mondal, Suvendu Sekhar and Dey, Subarna and Baburin, Igor A. and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Syntheses of two imidazolate-4-amide-5-imidate linker based hexagonal metal-organic frameworks with flexible ethoxy substituent},
  doi       = {10.1039/C3CE41632A},
  year      = {2008},
  abstract  = {A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas- sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.},
  language  = {en}
}
@article{MondalBhuniaDemeshoketal.2008,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Demeshok, Serhiy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Synthesis of a Co(II)-imidazolate framework from an anionic linker precursor: gas-sorption ans magnetic proberties},
  year      = {2008},
  abstract  = {A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.},
  language  = {en}
}
@article{MondalBhuniaBaburinetal.2008,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Baburin, Igor A. and J{\"a}ger, Christian and Kelling, Alexandra and Schilde, Uwe and Seiert, Gotthard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Gate effects in a hexagonal zinc-imidazolate-4-amide-5-imidate framework with flexible methoxy substituents and CO2 selectivity},
  doi       = {10.1039/C3CC42156B},
  year      = {2008},
  abstract  = {A new imidazolate-4-amide-5-imidate based MOF, IFP-7, is generated, having flexible methoxy groups, which act as molecular gates for guest molecules. This allows highly selective CO2 sorption over N2 and CH4 gases.},
  language  = {en}
}
@article{MondalBhuniaAttallahetal.2016,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Attallah, Ahmed G. and Matthes, Philipp R. and Kelling, Alexandra and Schilde, Uwe and M{\"u}ller-Buschbaum, Klaus and Krause-Rehberg, Reinhard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Study of the Discrepancies between Crystallographic Porosity and Guest Access into Cadmium-Imidazolate Frameworks and Tunable Luminescence Properties by Incorporation of Lanthanides},
  series = {Chemistry - a European journal},
  volume    = {22},
  journal   = {Chemistry - a European journal},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201504757},
  pages     = {6905 -- 6913},
  year      = {2016},
  abstract  = {An extended member of the isoreticular family of metal-imidazolate framework structures, IFP-6 (IFP=imidazolate framework Potsdam), based on cadmium metal and an in situ functionalized 2-methylimidazolate-4-amide-5-imidate linker is reported. A porous 3D framework with 1D hexagonal channels with accessible pore windows of 0.52nm has been synthesized by using an ionic liquid (IL) linker precursor. IFP-6 shows significant gas uptake capacity only for CO2 and CH4 at elevated pressure, whereas it does not adsorb N-2, H-2, and CH4 under atmospheric conditions. IFP-6 is assumed to deteriorate at the outside of the material during the activation process. This closing of the metal-organic framework (MOF) pores is proven by positron annihilation lifetime spectroscopy (PALS), which revealed inherent crystal defects. PALS results support the conservation of the inner pores of IFP-6. IFP-6 has also been successfully loaded with luminescent trivalent lanthanide ions (Ln(III)=Tb, Eu, and Sm) in a bottom-up one-pot reaction through the in situ generation of the linker ligand and in situ incorporation of photoluminescent Ln ions into the constituting network. The results of photoluminescence investigations and powder XRD provide evidence that the Ln ions are not doped as connectivity centers into the frameworks, but are instead located within the pores of the MOFs. Under UV light irradiation, Tb@IFP-6 and Eu@IFP-6 ((exc)=365nm) exhibit observable emission changes to a greenish and reddish color, respectively, as a result of strong Ln 4f emissions.},
  language  = {en}
}
@article{MondalThomasHoldt2015,
  author    = {Mondal, Suvendu Sekhar and Thomas, Arne and Holdt, Hans-J{\"u}rgen},
  title     = {In situ synthesis of amide-imidate-imidazolate ligand and formation of metal-organic frameworks: Application for gas storage},
  series = {Microporous and mesoporous materials : zeolites, clays, carbons and related materials},
  volume    = {216},
  journal   = {Microporous and mesoporous materials : zeolites, clays, carbons and related materials},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1387-1811},
  doi       = {10.1016/j.micromeso.2015.01.049},
  pages     = {2 -- 12},
  year      = {2015},
  abstract  = {In this review article, we highlight the synthesis, structures and gas-sorption properties of a series of nine isostructural IFPs (IFP = Imidazolate Framework Potsdam) and two H-bonded networks. IFPs were synthesized by in situ partial hydrolysis of a 4,5-dicyanoimidazole under solvothermal conditions and hence an imidazolate-4-amide-5-imidate linker (C5H3N4O2) was generated, forming the metal -amide-imidate-imidazolateframeworks [M(C5H3N4O2)-R]. Varying R in the 2-substitued linker (R = Me, Cl, Br, Et, OMe and OEt) and metal centre (M2+ = zinc and cobalt) allowed the variation in channel diameter (4.2-03 angstrom) and a fine-tuning of the polarity and functionality of the channel walls of IFPs. Furthermore, we show that using ethyl or alkoxy substituted IFPs the flexible groups act as molecular gates for guest molecules. This allows highly selective CO2 sorption over Ny and CH4 gases. Moreover, during the synthesis of methoxy substituted IFPs (IFP-7 and -8), an imidazolate-4,5-diamide-2-olate linker (C5H4N4O3) formed in situ leads to the formation of a molecular building block (MBB) with a M-6 octahedron inscribed in a M-8 cube (M Zn2+ and Co2+). The MBBs connect by amide amide hydrogen bonds to a 3D robust supramolecular networks [Zn-14(C5H4N4O3)(12)(O) (OH)(2) (DMF)(4) denoted as 1 and 2, respectively, DMF = N,N'-dimethylformamide], which can be activated for N-2, CO2, CH4, and H-2 gas-sorption. (C) 2015 Elsevier Inc. All rights reserved.},
  language  = {en}
}
@article{MondalMuellerJungingeretal.2014,
  author    = {Mondal, Suvendu Sekhar and Mueller, Holger and Junginger, Matthias and Kelling, Alexandra and Schilde, Uwe and Strehmel, Veronika and Holdt, Hans-J{\"u}rgen},
  title     = {Imidazolium 2-substituted 4,5-dicyanoimidazolate ionic liquids: synthesis, crystal structures and structure-thermal property relationships},
  series = {Chemistry - a European journal},
  volume    = {20},
  journal   = {Chemistry - a European journal},
  number    = {26},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.201304934},
  pages     = {8170 -- 8181},
  year      = {2014},
  abstract  = {Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -68 degrees C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.},
  language  = {en}
}
@article{MondalBehrensKellingetal.2015,
  author    = {Mondal, Suvendu Sekhar and Behrens, Karsten and Kelling, Alexandra and Nabein, Hans-Peter and Schilde, Uwe and Holdt, Hans-J{\"u}rgen},
  title     = {Two Cd-II/Co-II-Imidazolate Coordination Polymers: Syntheses, Crystal Structures, Stabilities, and Luminescent/Magnetic Properties},
  series = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  volume    = {641},
  journal   = {Zeitschrift f{\"u}r anorganische und allgemeine Chemie},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0044-2313},
  doi       = {10.1002/zaac.201500526},
  pages     = {1991 -- 1997},
  year      = {2015},
  abstract  = {Cadmium(II) based 2D coordination polymer [Cd(L1)(2)(DMF)(2)] (1) (L1 = 4,5-dicyano-2-methylimidazolate, DMF = N,N'-dimethylformamide) and 2D cobalt(II)-imidazolate framework [Co(L3)(4)] (2) (L3 = 4,5-diamide-2-ethoxyimidazolate) were synthesized under solvothermal reaction conditions. The materials were characterized by elemental analysis, IR spectroscopy, thermogravimetric analysis, powder X-ray diffraction measurement (PXRD) and single-crystal X-ray diffraction. Compound 1 has hexacoordinate Cd-II ions and forms a zigzag chain-like coordination polymer structure, whereas compound 2 exhibits a 2D square grid type structure. The thermal stability analysis reveals that 2 showed an exceptional thermal stability up to 360 degrees C. Also, 2 maintained its fully crystalline integrity in boiling water as confirmed by PXRD. The solid state luminescent property of 1 was not observed at room temperature. Compound 2 showed an independent high spin central Co-II atom.},
  language  = {en}
}
@article{MondalBhuniaKellingetal.2014,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Giant Zn-14 molecular building block in hydrogen-bonded network with permanent porosity for gas uptake},
  series = {Journal of the American Chemical Society},
  volume    = {136},
  journal   = {Journal of the American Chemical Society},
  number    = {1},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0002-7863},
  doi       = {10.1021/ja410595q},
  pages     = {44 -- 47},
  year      = {2014},
  abstract  = {In situ imidazolate-4,5-diamide-2-olate linker generation leads to the formation of a [Zn-14(L2)(12)(O)-(OH)(2)(H2O)(4)] molecular building block (MBB) with a Zn-6 octahedron inscribed in a Zn-8 cube. The MBBs connect by amide-amide hydrogen bonds to a 3D robust supramolecular network which can be activated for N-2, CO2, CH4, and H-2 gas sorption.},
  language  = {en}
}
@article{MondalBhuniaKellingetal.2014,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {A supramolecular Co(II)(14)- metal-organic cube in a hydrogen-bonded network and a Co(II)-organic framework with a flexible methoxy substituent},
  series = {Chemical communications},
  volume    = {50},
  journal   = {Chemical communications},
  number    = {41},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1359-7345},
  doi       = {10.1039/c3cc49698h},
  pages     = {5441 -- 5443},
  year      = {2014},
  abstract  = {The reaction of 4,5-dicyano-2-methoxyimidazole (L1) with Co(NO3)(2.) 6H(2)O under solvothermal conditions in DMF, a MOF, IFP-8 and a hydrogen-bonded network consisting of tetradecanuclear Co(II)(14)-metal organic cube (1) are achieved. 1 shows the bcu net with 14 cobalt atoms.},
  language  = {en}
}
@article{MondalBhuniaDemeshkoetal.2014,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Demeshko, Serhiy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Synthesis of a Co(II)-imidazolate framework from an anionic linker precursor: gas-sorption and magnetic properties},
  series = {CrystEngComm},
  volume    = {16},
  journal   = {CrystEngComm},
  number    = {1},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1466-8033},
  doi       = {10.1039/c3ce42040j},
  pages     = {39 -- 42},
  year      = {2014},
  abstract  = {A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N-2, CO2, CH4 and H-2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.},
  language  = {en}
}
@article{MondalMarquardtJaniaketal.2016,
  author    = {Mondal, Suvendu Sekhar and Marquardt, Dorothea and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Use of a 4,5-dicyanoimidazolate anion based ionic liquid for the synthesis of iron and silver nanoparticles},
  series = {Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry},
  volume    = {45},
  journal   = {Dalton transactions : a journal of inorganic chemistry, including bioinorganic, organometallic, and solid-state chemistry},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1477-9226},
  doi       = {10.1039/c6dt00225k},
  pages     = {5476 -- 5483},
  year      = {2016},
  abstract  = {Sixteen new ionic liquids (ILs) with tetraethylammonium, 1-butyl-3-methylimidazolium, 3-methyl-1-octylimidazolium and tetrabutylphosphonium cations paired with 2-substituted 4,5-dicyanoimidazolate anions (substituent at C2 = methyl, trifluoromethyl, pentafluoroethyl, N,N\&\#8242;-dimethyl amino and nitro) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA). The effects of cation and anion type and structure of the resulting ILs, including several room temperature ionic liquids (RTILs), are reflected in the crystallization, melting points and thermal decomposition of the ILs. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of \&\#8722;22 to \&\#8722;71 °C. We selected one of the newly designed ILs due to its bigger size, compared to the common conventional IL anion and high electron-withdrawing nitrile group leads to an overall stabilization anion that may stabilize the metal nanoparticles. Stable and better separated iron and silver nanoparticles are obtained by the decomposition of corresponding Fe2(CO)9 and AgPF6, respectively, under N2-atmosphere in newly designed nitrile functionalized 4,5-dicyanoimidazolate anion based IL. Very small and uniform size for Fe-nanoparticles of about 1.8 ± 0.6 nm were achieved without any additional stabilizers or capping molecules. Comparatively bigger size of Ag-nanoparticles was obtained through the reduction of AgPF6 by hydrogen gas. Additionally, the AgPF6 precursor was decomposed under microwave irradiation (MWI), fabricating nut-in-shell-like, that is, core-separated-from-shell Ag-nano-structures.},
  language  = {en}
}
@article{MondalHovestadtDeyetal.2017,
  author    = {Mondal, Suvendu Sekhar and Hovestadt, Maximilian and Dey, Subarna and Paula, Carolin and Glomb, Sebastian and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Hartmann, Martin and Holdt, Hans-J{\"u}rgen},
  title     = {Synthesis of a partially fluorinated ZIF-8 analog for ethane/ethene separation},
  series = {CrystEngComm},
  volume    = {19},
  journal   = {CrystEngComm},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1466-8033},
  doi       = {10.1039/c7ce01438d},
  pages     = {5882 -- 5891},
  year      = {2017},
  abstract  = {The separation of ethane/ethene mixtures (as well as other paraffin/olefin mixtures) is one of the most important but challenging processes in the petrochemical industry. In this work, we report the synthesis of ZIF-318, isostructural to ZIF-8 but built from the mixed linkers of 2-methylimidazole (L1) and 2-trifluoromethylimidazole (L2) (ZIF-318 = [(Zn(L1)(L2)](n)). The synthesis has been optimized to proceed without ZnO-formation. Using only the L2 linker under solvothermal conditions afforded ZnO-embedded in the H-bonded and non-porous coordination polymer ZnO@[Zn-2(L2)(2)(HCOO)(OH)](n). The slight differences in the size of the substituents (-CH3 vs. -CF3) possibly in combination with different electronic inductive effects led to small but significant changes to the pore size and properties respectively, though the effective pore opening (aperture) size of ZIF-318 remained the same in comparison with ZIF-8. ZIF-318 is chemically (boiling water, methanol, benzene, and wide pH range at room temperature for 1 day), thermally (up to 310 degrees C) stable, and more hydrophobic than ZIF-8 which is proven by contact angle measurement. ZIF-318 can be activated for N-2, CO2, CH4, H-2, ethane, ethane, propane, and propene gases sorptions. Consequently, in breakthrough experiments, the ethane/ethene mixtures can be separated.},
  language  = {en}
}
@article{HovestadtBendtMondaletal.2017,
  author    = {Hovestadt, Maximilian and Bendt, Stephan and Mondal, Suvendu Sekhar and Behrens, Karsten and Reif, Florian and Dopken, Merle and Holdt, Hans-J{\"u}rgen and Keil, Frerich J. and Hartmann, Martin},
  title     = {Experimental and Theoretical Analysis of the Influence of Different Linker Molecules in Imidazolate Frameworks Potsdam (IFP-n) on the Separation of Olefin-Paraffin Mixtures},
  series = {Langmuir},
  volume    = {33},
  journal   = {Langmuir},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0743-7463},
  doi       = {10.1021/acs.langmuir.7b02016},
  pages     = {11170 -- 11179},
  year      = {2017},
  abstract  = {Four metal organic frameworks with similar topology but different chemical environment inside the pore structure, namely, IFP-1, IFP-3, IFP-5, and IFP-7, have been investigated with respect to the separation potential for olefin paraffin mixtures as well as the influence of the different linkers on adsorption properties using experiments and Monte Carlo simulations. All IFP structures show a higher adsorption of ethane compared to ethene with the exception of IFP-7 which shows no selectivity in breakthrough experiments. For propane/propane separation, all adsorbents show a higher adsorption for the olefin. The experimental results agree quite well with the simulated values except for the IFP-7, which is presumably due to the flexibility of the structure. Moreover, the experimental and simulated isotherms were confirmed with breakthrough experiments that render IFP-1, IFP-3, and IFP-5 as suitable for the purification of ethene from ethane.},
  language  = {en}
}