@article{GouLiuKliemetal.2019, author = {Gou, Tingyu and Liu, Rui and Kliem, Bernhard and Wang, Yuming and Veronig, Astrid M.}, title = {The birth of a coronal mass ejection}, series = {Science Advances}, volume = {5}, journal = {Science Advances}, number = {3}, publisher = {American Assoc. for the Advancement of Science}, address = {Washington}, issn = {2375-2548}, doi = {10.1126/sciadv.aau7004}, pages = {9}, year = {2019}, abstract = {The Sun's atmosphere is frequently disrupted by coronal mass ejections (CMEs), coupled with flares and energetic particles. The coupling is usually attributed to magnetic reconnection at a vertical current sheet connecting the flare and CME, with the latter embedding a helical magnetic structure known as flux rope. However, both the origin of flux ropes and their nascent paths toward eruption remain elusive. Here, we present an observation of how a stellar-sized CME bubble evolves continuously from plasmoids, mini flux ropes that are barely resolved, within half an hour. The eruption initiates when plasmoids springing from a vertical current sheet merge into a leading plasmoid, which rises at increasing speeds and expands impulsively into the CME bubble, producing hard x-ray bursts simultaneously. This observation illuminates a complete CME evolutionary path capable of accommodating a wide variety of plasma phenomena by bridging the gap between microscale and macroscale dynamics.}, language = {en} } @article{LiuLiuXuetal.2013, author = {Liu, Rui and Liu, Chang and Xu, Yan and Liu, Wei and Kliem, Bernhard and Wang, Haimin}, title = {Observation of a moretown wave and wave-filament interactions associated with the renowned X9 flare on 1990 May 24}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {773}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {2}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/773/2/166}, pages = {13}, year = {2013}, abstract = {Using Big Bear Solar Observatory film data recently digitized at NJIT, we investigate a Moreton wave associated with an X9 flare on 1990 May 24, as well as its interactions with four filaments F1-F4 located close to the flaring region. The interaction yields interesting insight into physical properties of both the wave and the filaments. The first clear Moreton wavefront appears at the flaring-region periphery at approximately the same time as the peak of a microwave burst and the first of two gamma-ray peaks. The wavefront propagates at different speeds ranging from 1500-2600 km s(-1) in different directions, reaching as far as 600 Mm away from the flaring site. Sequential chromospheric brightenings are observed ahead of the Moreton wavefront. A slower diffuse front at 300-600 km s(-1) is observed to trail the fast Moreton wavefront about one minute after the onset. The Moreton wave decelerates to similar to 550 km s(-1) as it sweeps through F1. The wave passage results in F1's oscillation which is featured by similar to 1 mHz signals with coherent Fourier phases over the filament, the activation of F3 and F4 followed by gradual recovery, but no disturbance in F2. Different height and magnetic environment together may account for the distinct responses of the filaments to the wave passage. The wavefront bulges at F4, whose spine is oriented perpendicular to the upcoming wavefront. The deformation of the wavefront is suggested to be due to both the forward inclination of the wavefront and the enhancement of the local Alfven speed within the filament channel.}, language = {en} } @article{KliemToeroekTitovetal.2014, author = {Kliem, Bernhard and Toeroek, Tibor and Titov, Viacheslav S. and Lionello, Roberto and Linker, Jon A. and Liu, Rui and Liu, Chang and Wang, Haimin}, title = {Slow rise and partial eruption of a double-decker filament. II. A double flux rope model}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {792}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {2}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/792/2/107}, pages = {10}, year = {2014}, abstract = {Force-free equilibria containing two vertically arranged magnetic flux ropes of like chirality and current direction are considered as a model for split filaments/prominences and filament-sigmoid systems. Such equilibria are constructed analytically through an extension of the methods developed in Titov \& Demoulin and numerically through an evolutionary sequence including shear flows, flux emergence, and flux cancellation in the photospheric boundary. It is demonstrated that the analytical equilibria are stable if an external toroidal (shear) field component exceeding a threshold value is included. If this component decreases sufficiently, then both flux ropes turn unstable for conditions typical of solar active regions, with the lower rope typically becoming unstable first. Either both flux ropes erupt upward, or only the upper rope erupts while the lower rope reconnects with the ambient flux low in the corona and is destroyed. However, for shear field strengths staying somewhat above the threshold value, the configuration also admits evolutions which lead to partial eruptions with only the upper flux rope becoming unstable and the lower one remaining in place. This can be triggered by a transfer of flux and current from the lower to the upper rope, as suggested by the observations of a split filament in Paper I. It can also result from tether-cutting reconnection with the ambient flux at the X-type structure between the flux ropes, which similarly influences their stability properties in opposite ways. This is demonstrated for the numerically constructed equilibrium.}, language = {en} } @article{LiuKliemToeroeketal.2012, author = {Liu, Rui and Kliem, Bernhard and Toeroek, Tibor and Liu, Chang and Titov, Viacheslav S. and Lionello, Roberto and Linker, Jon A. and Wang, Haimin}, title = {Slow rise and partial eruption of a double-decker filament. I. observations and interpretation}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {756}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {1}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/756/1/59}, pages = {14}, year = {2012}, abstract = {We study an active-region dextral filament that was composed of two branches separated in height by about 13 Mm, as inferred from three-dimensional reconstruction by combining SDO and STEREO-B observations. This "double-decker" configuration sustained for days before the upper branch erupted with a GOES-class M1.0 flare on 2010 August 7. Analyzing this evolution, we obtain the following main results. (1) During the hours before the eruption, filament threads within the lower branch were observed to intermittently brighten up, lift upward, and then merge with the upper branch. The merging process contributed magnetic flux and current to the upper branch, resulting in its quasi-static ascent. (2) This transfer might serve as the key mechanism for the upper branch to lose equilibrium by reaching the limiting flux that can be stably held down by the overlying field or by reaching the threshold of the torus instability. (3) The erupting branch first straightened from a reverse S shape that followed the polarity inversion line and then writhed into a forward S shape. This shows a transfer of left-handed helicity in a sequence of writhe-twist-writhe. The fact that the initial writhe is converted into the twist of the flux rope excludes the helical kink instability as the trigger process of the eruption, but supports the occurrence of the instability in the main phase, which is indeed indicated by the very strong writhing motion. (4) A hard X-ray sigmoid, likely of coronal origin, formed in the gap between the two original filament branches in the impulsive phase of the associated flare. This supports a model of transient sigmoids forming in the vertical flare current sheet. (5) Left-handed magnetic helicity is inferred for both branches of the dextral filament. (6) Two types of force-free magnetic configurations are compatible with the data, a double flux rope equilibrium and a single flux rope situated above a loop arcade.}, language = {en} } @article{LiuKliemTitovetal.2016, author = {Liu, Rui and Kliem, Bernhard and Titov, Viacheslav S. and Chen, Jun and Wang, Yuming and Wang, Haimin and Liu, Chang and Xu, Yan and Wiegelmann, Thomas}, title = {STRUCTURE, STABILITY, AND EVOLUTION OF MAGNETIC FLUX ROPES FROM THE PERSPECTIVE OF MAGNETIC TWIST}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {818}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.3847/0004-637X/818/2/148}, pages = {22}, year = {2016}, abstract = {We investigate the evolution of NOAA Active Region (AR) 11817 during 2013 August 10-12, when it developed a complex field configuration and produced four confined, followed by two eruptive, flares. These C-and-above flares are all associated with a magnetic flux rope (MFR) located along the major polarity inversion line, where shearing and converging photospheric flows are present. Aided by the nonlinear force-free field modeling, we identify the MFR through mapping magnetic connectivities and computing the twist number \${{ \mathcal T }}_{w}\$ for each individual field line. The MFR is moderately twisted (\$| {{ \mathcal T }}_{w}| \lt 2\$) and has a well-defined boundary of high squashing factor Q. We found that the field line with the extremum \$| {{ \mathcal T }}_{w}| \$ is a reliable proxy of the rope axis, and that the MFR's peak \$| {{ \mathcal T }}_{w}| \$ temporarily increases within half an hour before each flare while it decreases after the flare peak for both confined and eruptive flares. This pre-flare increase in \$| {{ \mathcal T }}_{w}| \$ has little effect on the AR's free magnetic energy or any other parameters derived for the whole region, due to its moderate amount and the MFR's relatively small volume, while its decrease after flares is clearly associated with the stepwise decrease in the whole region's free magnetic energy due to the flare. We suggest that \${{ \mathcal T }}_{w}\$ may serve as a useful parameter in forewarning the onset of eruption, and therefore, the consequent space weather effects. The helical kink instability is identified as the prime candidate onset mechanism for the considered flares.}, language = {en} } @article{ChenLiuLiuetal.2019, author = {Chen, Jun and Liu, Rui and Liu, Kai and Awasthi, Arun Kumar and Zhang, Peijin and Wang, Yuming and Kliem, Bernhard}, title = {Extreme-ultraviolet late phase of solar flares}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {890}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {2}, publisher = {Institute of Physics Publ.}, address = {London}, issn = {0004-637X}, doi = {10.3847/1538-4357/ab6def}, pages = {10}, year = {2019}, abstract = {A second peak in the extreme ultraviolet sometimes appears during the gradual phase of solar flares, which is known as the EUV late phase (ELP). Stereotypically ELP is associated with two separated sets of flaring loops with distinct sizes, and it has been debated whether ELP is caused by additional heating or extended plasma cooling in the longer loop system. Here we carry out a survey of 55 M-and-above GOES-class flares with ELP during 2010-2014. Based on the flare-ribbon morphology, these flares are categorized as circular-ribbon (19 events), two-ribbon (23 events), and complex-ribbon (13 events) flares. Among them, 22 events (40\%) are associated with coronal mass ejections, while the rest are confined. An extreme ELP, with the late-phase peak exceeding the main-phase peak, is found in 48\% of two-ribbon flares, 37\% of circular-ribbon flares, and 31\% of complex-ribbon flares, suggesting that additional heating is more likely present during ELP in two-ribbon than in circular-ribbon flares. Overall, cooling may be the dominant factor causing the delay of the ELP peak relative to the main-phase peak, because the loop system responsible for the ELP emission is generally larger than, and well separated from, that responsible for the main-phase emission. All but one of the circular-ribbon flares can be well explained by a composite "dome-plate" quasi-separatrix layer (QSL). Only half of these show a magnetic null point, with its fan and spine embedded in the dome and plate, respectively. The dome-plate QSL, therefore, is a general and robust structure characterizing circular-ribbon flares.}, language = {en} } @article{LiChenNofaletal.2018, author = {Li, Yuanqing and Chen, Li and Nofal, Issam and Chen, Mo and Wang, Haibin and Liu, Rui and Chen, Qingyu and Krstić, Miloš and Shi, Shuting and Guo, Gang and Baeg, Sang H. and Wen, Shi-Jie and Wong, Richard}, title = {Modeling and analysis of single-event transient sensitivity of a 65 nm clock tree}, series = {Microelectronics reliability}, volume = {87}, journal = {Microelectronics reliability}, publisher = {Elsevier}, address = {Oxford}, issn = {0026-2714}, doi = {10.1016/j.microrel.2018.05.016}, pages = {24 -- 32}, year = {2018}, abstract = {The soft error rate (SER) due to heavy-ion irradiation of a clock tree is investigated in this paper. A method for clock tree SER prediction is developed, which employs a dedicated soft error analysis tool to characterize the single-event transient (SET) sensitivities of clock inverters and other commercial tools to calculate the SER through fault-injection simulations. A test circuit including a flip-flop chain and clock tree in a 65 nm CMOS technology is developed through the automatic ASIC design flow. This circuit is analyzed with the developed method to calculate its clock tree SER. In addition, this circuit is implemented in a 65 nm test chip and irradiated by heavy ions to measure its SER resulting from the SETs in the clock tree. The experimental and calculation results of this case study present good correlation, which verifies the effectiveness of the developed method.}, language = {en} }