@article{BlaserKruegerOhrnbergeretal.2010,
  author    = {Blaser, Lilian and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank},
  title     = {Scaling relations of earthquake source parameter estimates with special focus on subduction environment},
  issn      = {0037-1106},
  doi       = {10.1785/0120100111},
  year      = {2010},
  abstract  = {Earthquake rupture length and width estimates are in demand in many seismological applications. Earthquake magnitude estimates are often available, whereas the geometrical extensions of the rupture fault mostly are lacking. Therefore, scaling relations are needed to derive length and width from magnitude. Most frequently used are the relationships of Wells and Coppersmith (1994) derived on the basis of a large dataset including all slip types with the exception of thrust faulting events in subduction environments. However, there are many applications dealing with earthquakes in subduction zones because of their high seismic and tsunamigenic potential. There are no well-established scaling relations for moment magnitude and length/width for subduction events. Within this study, we compiled a large database of source parameter estimates of 283 earthquakes. All focal mechanisms are represented, but special focus is set on (large) subduction zone events, in particular. Scaling relations were fitted with linear least-square as well as orthogonal regression and analyzed regarding the difference between continental and subduction zone/oceanic relationships. Additionally, the effect of technical progress in earthquake parameter estimation on scaling relations was tested as well as the influence of different fault mechanisms. For a given moment magnitude we found shorter but wider rupture areas of thrust events compared to Wells and Coppersmith (1994). The thrust event relationships for pure continental and pure subduction zone rupture areas were found to be almost identical. The scaling relations differ significantly for slip types. The exclusion of events prior to 1964 when the worldwide standard seismic network was established resulted in a remarkable effect on strike-slip scaling relations: the data do not show any saturation of rupture width of strike- slip earthquakes. Generally, rupture area seems to scale with mean slip independent of magnitude. The aspect ratio L/W, however, depends on moment and differs for each slip type.},
  language  = {en}
}
@article{BlaserOhrnbergerKruegeretal.2012,
  author    = {Blaser, Lilian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Scherbaum, Frank},
  title     = {Probabilistic tsunami threat assessment of 10 recent earthquakes offshore Sumatra},
  series = {Geophysical journal international},
  volume    = {188},
  journal   = {Geophysical journal international},
  number    = {3},
  publisher = {Wiley-Blackwell},
  address   = {Malden},
  issn      = {0956-540X},
  doi       = {10.1111/j.1365-246X.2011.05324.x},
  pages     = {1273 -- 1284},
  year      = {2012},
  abstract  = {Tsunami early warning (TEW) is a challenging task as a decision has to be made within few minutes on the basis of incomplete and error-prone data. Deterministic warning systems have difficulties in integrating and quantifying the intrinsic uncertainties. In contrast, probabilistic approaches provide a framework that handles uncertainties in a natural way. Recently, we have proposed a method using Bayesian networks (BNs) that takes into account the uncertainties of seismic source parameter estimates in TEW. In this follow-up study, the method is applied to 10 recent large earthquakes offshore Sumatra and tested for its performance. We have evaluated both the general model performance given the best knowledge we have today about the source parameters of the 10 events and the corresponding response on seismic source information evaluated in real-time. We find that the resulting site-specific warning level probabilities represent well the available tsunami wave measurements and observations. Difficulties occur in the real-time tsunami assessment if the moment magnitude estimate is severely over- or underestimated. In general, the probabilistic analysis reveals a considerably large range of uncertainties in the near-field TEW. By quantifying the uncertainties the BN analysis provides important additional information to a decision maker in a warning centre to deal with the complexity in TEW and to reason under uncertainty.},
  language  = {en}
}
@article{LontsiJoseSanchezSesmaCamilloMolinaVillegasetal.2015,
  author    = {Lontsi, Agostiny Marrios and Jose Sanchez-Sesma, Francisco and Camillo Molina-Villegas, Juan and Ohrnberger, Matthias and Kr{\"u}ger, Frank},
  title     = {Full microtremor H/V(z,f) inversion for shallow subsurface characterization},
  series = {Geophysical journal international},
  volume    = {202},
  journal   = {Geophysical journal international},
  number    = {1},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggv132},
  pages     = {298 -- 312},
  year      = {2015},
  abstract  = {The H/V spectral ratio has emerged as a single station method within the seismic ambient noise analysis field by its capability to quickly estimate the frequency of resonance at a site and through inversion the average profile information. Although it is easy to compute from experimental data, its counter theoretical part is not obvious when building a forward model which can help in reconstructing the derived H/V spectrum. This has led to the simplified assumption that the noise wavefield is mainly composed of Rayleigh waves and the derived H/V often used without further correction. Furthermore, only the right (and left) flank around the H/V peak frequency is considered in the inversion for the subsurface 1-D shear wave velocity profile. A new theoretical approach for the interpretation of the H/V spectral ratio has been presented by Sanchez-Sesmaet al. In this paper, the fundamental idea behind their theory is presented as it applies to receivers at depth. A smooth H/V(z, f) spectral curve on a broad frequency range is obtained by considering a fine integration step which is in turn time consuming. We show that for practical purposes and in the context of inversion, this can be considerably optimized by using a coarse integration step combined with the smoothing of the corresponding directional energy density (DED) spectrum. Further analysis shows that the obtained H/V(z, f) spectrum computed by the mean of the imaginary part of Green's function method could also be recovered using the reflectivity method for a medium well illuminated by seismic sources. Inversion of synthetic H/V(z, f) spectral curve is performed for a single layer over a half space. The striking results allow to potentially use the new theory as a forward computation of the H/V(z, f) to fully invert the experimental H/V spectral ratio at the corresponding depth for the shear velocity profile (Vs) and additionally the compressional velocity profile (Vp) using receivers both at the surface and in depth. We use seismic ambient noise data in the frequency range of 0.2-50 Hz recorded at two selected sites in Germany where borehole information is also available. The obtained 1-D Vs and Vp profiles are correlated with geological log information. Results from shallow geophysical experiment are also used for comparison.},
  language  = {en}
}
@misc{ZaliReinKruegeretal.2023,
  author    = {Zali, Zahra and Rein, Teresa and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank},
  title     = {Ocean bottom seismometer (OBS) noise reduction from horizontal and vertical components using harmonic-percussive separation algorithms},
  series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1320},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-58882},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-588828},
  pages     = {15},
  year      = {2023},
  abstract  = {Records from ocean bottom seismometers (OBSs) are highly contaminated by noise, which is much stronger compared to data from most land stations, especially on the horizontal components. As a consequence, the high energy of the oceanic noise at frequencies below 1 Hz considerably complicates the analysis of the teleseismic earthquake signals recorded by OBSs. Previous studies suggested different approaches to remove low-frequency noises from OBS recordings but mainly focused on the vertical component. The records of horizontal components, which are crucial for the application of many methods in passive seismological analysis of body and surface waves, could not be much improved in the teleseismic frequency band. Here we introduce a noise reduction method, which is derived from the harmonic-percussive separation algorithms used in Zali et al. (2021), in order to separate long-lasting narrowband signals from broadband transients in the OBS signal. This leads to significant noise reduction of OBS records on both the vertical and horizontal components and increases the earthquake signal-to-noise ratio (SNR) without distortion of the broadband earthquake waveforms. This is demonstrated through tests with synthetic data. Both SNR and cross-correlation coefficients showed significant improvements for different realistic noise realizations. The application of denoised signals in surface wave analysis and receiver functions is discussed through tests with synthetic and real data.},
  language  = {en}
}
@article{ZaliReinKruegeretal.2023,
  author    = {Zali, Zahra and Rein, Teresa and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Scherbaum, Frank},
  title     = {Ocean bottom seismometer (OBS) noise reduction from horizontal and vertical components using harmonic-percussive separation algorithms},
  series = {Solid earth},
  volume    = {14},
  journal   = {Solid earth},
  number    = {2},
  publisher = {Coepernicus Publ.},
  address   = {G{\"o}ttingen},
  issn      = {1869-9529},
  doi       = {10.5194/se-14-181-2023},
  pages     = {181 -- 195},
  year      = {2023},
  abstract  = {Records from ocean bottom seismometers (OBSs) are highly contaminated by noise, which is much stronger compared to data from most land stations, especially on the horizontal components. As a consequence, the high energy of the oceanic noise at frequencies below 1 Hz considerably complicates the analysis of the teleseismic earthquake signals recorded by OBSs. Previous studies suggested different approaches to remove low-frequency noises from OBS recordings but mainly focused on the vertical component. The records of horizontal components, which are crucial for the application of many methods in passive seismological analysis of body and surface waves, could not be much improved in the teleseismic frequency band. Here we introduce a noise reduction method, which is derived from the harmonic-percussive separation algorithms used in Zali et al. (2021), in order to separate long-lasting narrowband signals from broadband transients in the OBS signal. This leads to significant noise reduction of OBS records on both the vertical and horizontal components and increases the earthquake signal-to-noise ratio (SNR) without distortion of the broadband earthquake waveforms. This is demonstrated through tests with synthetic data. Both SNR and cross-correlation coefficients showed significant improvements for different realistic noise realizations. The application of denoised signals in surface wave analysis and receiver functions is discussed through tests with synthetic and real data.},
  language  = {en}
}
@article{LontsiOhrnbergerKrueger2016,
  author    = {Lontsi, Agostiny Marrios and Ohrnberger, Matthias and Kr{\"u}ger, Frank},
  title     = {Shear wave velocity profile estimation by integrated analysis of active and passive seismic data from small aperture arrays},
  series = {Journal of applied geophysics},
  volume    = {130},
  journal   = {Journal of applied geophysics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0926-9851},
  doi       = {10.1016/j.jappgeo.2016.03.034},
  pages     = {37 -- 52},
  year      = {2016},
  abstract  = {We present an integrated approach for deriving the 1D shear wave velocity (Vs) information at few tens to hundreds of meters down to the first strong impedance contrast in typical sedimentary environments. We use multiple small aperture seismic arrays in 1D and 2D configuration to record active and passive seismic surface wave data at two selected geotechnical sites in Germany (Horstwalde \& Lobnitz). Standard methods for data processing include the Multichannel Analysis of Surface Waves (MASW) method that exploits the high frequency content in the active data and the sliding window frequency-wavenumber (f-k) as well as the spatial autocorrelation (SPAC) methods that exploit the low frequency content in passive seismic data. Applied individually, each of the passive methods might be influenced by any source directivity in the noise wavefield. The advantages of active shot data (known source location) and passive microtremor (low frequency content) recording may be combined using a correlation based approach applied to the passive data in the so called Interferometric Multichannel Analysis of Surface Waves (IMASW). In this study, we apply those methods to jointly determine and interpret the dispersion characteristics of surface waves recorded at Horstwalde and Lobnitz. The reliability of the dispersion curves is controlled by applying strict limits on the interpretable range of wavelengths in the analysis and further avoiding potentially biased phase velocity estimates from the passive f-k method by comparing to those derived from the SPatial AutoCorrelation method (SPAC). From our investigation at these two sites, the joint analysis as proposed allows mode extraction in a wide frequency range (similar to 0.6-35 Hz at Horstwalde and similar to 1.5-25 Hz at Lobnitz) and consequently improves the Vs profile inversion. To obtain the shear wave velocity profiles, we make use of a global inversion approach based on the neighborhood algorithm to invert the interpreted branches of the dispersion curves. Within the uncertainty given by the apparent spread of forward models we find that besides a well defined sediment velocity range also a reasonable minimum estimate of bedrock depth and bedrock velocity can be achieved. The Vs estimate for the best model in Horstwalde ranges from similar to 190 m/s at the surface up to similar to 390 m/s in the bottom of the soft sediment column. The bedrock starts earliest around 200 m depth and bedrock velocities are higher than 1000 m/s. In Lobnitz, we observe slightly lower velocities for the sediments (similar to 165-375 m/s for the best model) and a minimum thickness of 75 m. (C) 2016 Elsevier B.V. All rights reserved.},
  language  = {en}
}
@article{HaendelOhrnbergerKrueger2016,
  author    = {H{\"a}ndel, Annabel and Ohrnberger, Matthias and Kr{\"u}ger, Frank},
  title     = {Extracting near-surface Q(L) between 1-4 Hz from higher-order noise correlations in the Euroseistest area, Greece},
  series = {Geophysical journal international},
  volume    = {207},
  journal   = {Geophysical journal international},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggw295},
  pages     = {655 -- 666},
  year      = {2016},
  abstract  = {Knowledge of the quality factor of near-surface materials is of fundamental interest in various applications. Attenuation can be very strong close to the surface and thus needs to be properly assessed. In recent years, several researchers have studied the retrieval of attenuation coefficients from the cross correlation of ambient seismic noise. Yet, the determination of exact amplitude information from noise-correlation functions is, in contrast to the extraction of traveltimes, not trivial. Most of the studies estimated attenuation coefficients on the regional scale and within the microseism band. In this paper, we investigate the possibility to derive attenuation coefficients from seismic noise at much shallower depths and higher frequencies (> 1 Hz). The Euroseistest area in northern Greece offers ideal conditions to study quality factor retrieval from ambient noise for different rock types. Correlations are computed between the stations of a small scale array experiment (station spacings < 2 km) that was carried out in the Euroseistest area in 2011. We employ the correlation of the coda of the correlation (C-3) method instead of simple cross correlations to mitigate the effect of uneven noise source distributions on the correlation amplitude. Transient removal and temporal flattening are applied instead of 1-bit normalization in order to retain relative amplitudes. The C-3 method leads to improved correlation results (higher signal-to-noise ratio and improved time symmetry) compared to simple cross correlations. The C-3 functions are rotated from the ZNE to the ZRT system and we focus on Love wave arrivals on the transverse component and on Love wave quality factors Q(L). The analysis is performed for selected stations being either situated on soft soil or on weathered rock. Phase slowness is extracted using a slant-stack method. Attenuation parameters are inferred by inspecting the relative amplitude decay of Love waves with increasing interstation distance. We observe that the attenuation coefficient gamma and Q(L) can be reliably extracted for stations situated on soft soil whereas the derivation of attenuation parameters is more problematic for stations that are located on weathered rock. The results are in acceptable conformance with theoretical Love wave attenuation curves that were computed using 1-D shear wave velocity and quality factor profiles from the Euroseistest area.},
  language  = {en}
}
@article{LontsiOhrnbergerKruegeretal.2016,
  author    = {Lontsi, Agostiny Marrios and Ohrnberger, Matthias and Kr{\"u}ger, Frank and S{\´a}nchez-Sesma, Francisco Jos{\´e}},
  title     = {Combining surface-wave phase-velocity dispersion curves and full microtremor horizontal-to-vertical spectral ratio for subsurface sedimentary site characterization},
  series = {Interpretation : a journal of subsurface characterization},
  volume    = {4},
  journal   = {Interpretation : a journal of subsurface characterization},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa},
  issn      = {2324-8858},
  doi       = {10.1190/INT-2016-0021.1},
  pages     = {SQ41 -- SQ49},
  year      = {2016},
  abstract  = {We compute seismic velocity profiles by a combined inversion of surface-wave phase-velocity dispersion curves together with the full spectrum of the microtremor horizontal-to-vertical (H/V) spectral ratio at two sediment-covered sites in Germany. The sediment deposits are approximately 100 m thick at the first test site and approximately 400 m thick at the second test site. We have used an extended physical model based on the diffuse wavefield assumption for the interpretation of the observed microtremor H/V spectral ratio. The extension includes the interpretation of the microtremor H/V spectral ratio observed at depth (in boreholes). This full-wavefield approach accounts for the energy contribution from the body and surface waves, and thus it allows for inverting the properties of the shallow subsurface. We have obtained the multimode phase velocity dispersion curves from an independent study, and a description of the extracted branches and their interpretation was developed. The inversion results indicate that the combined approach using seismic ambient noise and actively generated surface-wave data will improve the accuracy of the reconstructed near-surface velocity model, a key step in microzonation, geotechnical engineering, seismic statics corrections, and reservoir imaging.},
  language  = {en}
}
@article{LontsiGarciaJerezCamiloMolinaVillegasetal.2019,
  author    = {Lontsi, Agostiny Marrios and Garcia-Jerez, Antonio and Camilo Molina-Villegas, Juan and Jose Sanchez-Sesma, Francisco and Molkenthin, Christian and Ohrnberger, Matthias and Kr{\"u}ger, Frank and Wang, Rongjiang and Fah, Donat},
  title     = {A generalized theory for full microtremor horizontal-to-vertical [H/V(z,f)] spectral ratio interpretation in offshore and onshore environments},
  series = {Geophysical journal international},
  volume    = {218},
  journal   = {Geophysical journal international},
  number    = {2},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggz223},
  pages     = {1276 -- 1297},
  year      = {2019},
  abstract  = {Advances in the field of seismic interferometry have provided a basic theoretical interpretation to the full spectrum of the microtremor horizontal-to-vertical spectral ratio [H/V(f)]. The interpretation has been applied to ambient seismic noise data recorded both at the surface and at depth. The new algorithm, based on the diffuse wavefield assumption, has been used in inversion schemes to estimate seismic wave velocity profiles that are useful input information for engineering and exploration seismology both for earthquake hazard estimation and to characterize surficial sediments. However, until now, the developed algorithms are only suitable for on land environments with no offshore consideration. Here, the microtremor H/V(z, f) modelling is extended for applications to marine sedimentary environments for a 1-D layered medium. The layer propagator matrix formulation is used for the computation of the required Green's functions. Therefore, in the presence of a water layer on top, the propagator matrix for the uppermost layer is defined to account for the properties of the water column. As an application example we analyse eight simple canonical layered earth models. Frequencies ranging from 0.2 to 50 Hz are considered as they cover a broad wavelength interval and aid in practice to investigate subsurface structures in the depth range from a few meters to a few hundreds of meters. Results show a marginal variation of 8 per cent at most for the fundamental frequency when a water layer is present. The water layer leads to variations in H/V peak amplitude of up to 50 per cent atop the solid layers.},
  language  = {en}
}
@article{HaendelOhrnbergerKrueger2018,
  author    = {Haendel, Annabel and Ohrnberger, Matthias and Kr{\"u}ger, Frank},
  title     = {Frequency-dependent quality factors from the deconvolution of ambient noise recordings in a borehole in West Bohemia/Vogtland},
  series = {Geophysical journal international},
  volume    = {216},
  journal   = {Geophysical journal international},
  number    = {1},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggy422},
  pages     = {251 -- 260},
  year      = {2018},
  abstract  = {The correct estimation of site-specific attenuation is crucial for the assessment of seismic hazard. Downhole instruments provide in this context valuable information to constrain attenuation directly from data. In this study, we apply an interferometric approach to this problem by deconvolving seismic motions recorded at depth with those recorded at the surface. In doing so, incident and surface-reflected waves can be separated. We apply this technique not only to earthquake data but also to recordings of ambient vibrations. We compute the transfer function between incident and surface-reflected waves in order to infer frequency-dependent quality factors for S waves. The method is applied to a 87m deep borehole sensor and a colocated surface instrument situated at a hard-rock site in West Bohemia/Vogtland, Germany. We show that the described method provides comparable attenuation estimates using either earthquake data or ambient noise for frequencies between 5 and 15 Hz. Moreover, a single hour of noise recordings seems to be sufficient to yield stable deconvolution traces and quality factors, thus, offering a fast and easy way to derive attenuation estimates from borehole recordings even in low- to mid-seismicity regions.},
  language  = {en}
}
@misc{KruegerOhrnbergerRoessler2008,
  author    = {Kr{\"u}ger, Frank and Ohrnberger, Matthias and R{\"o}ßler, Dirk},
  title     = {Rupture imaging of large earthquakes with a poststack isochrone migration method},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-18395},
  year      = {2008},
  abstract  = {Rapid and robust characterization of large earthquakes in terms of their spatial extent and temporal duration is of high importance for disaster mitigation and early warning applications. Backtracking of seismic P-waves was successfully used by several authors to image the rupture process of the great Sumatra earthquake (26.12.2004) using short period and broadband arrays. We follow here an approach of Walker et al. to backtrack and stack broadband waveforms from global network stations using traveltimes for a global Earth model to obtain the overall spatio-temporal development of the energy radiation of large earthquakes in a quick and robust way. We present results for selected events with well studied source processes (Kokoxili 14.11.2001, Tokachi-Oki 25.09.2003, Nias 28.03.2005). Further, we apply the technique in a semi-real time fashion to broadband data of earthquakes with a broadband magnitude >= 7 (roughly corresponding to Mw 6.5). Processing is based on first automatic detection messages from the GEOFON extended virtual network (GEVN).},
  language  = {en}
}
@misc{RoesslerKruegerOhrnberger2007,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture propagation of recent large TsE off-coast Sumatra and Java},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13039},
  year      = {2007},
  abstract  = {The spatio-temporal evolution of the three recent tsunamogenic earthquakes (TsE) off-coast N-Sumatra (Mw9.3), 28/03/2005 (Mw8.5) off-coast Nias, on 17/07/2006 (Mw7.7) off-coast Java. Start time, duration, and propagation of the rupture are retrieved. All parameters can be obtained rapidly after recording of the first-arrival phases in near-real time processing. We exploit semblance analysis, backpropagation and broad-band seismograms within 30°-95° distance. Image enhancement is reached by stacking the semblance of arrays within different directions. For the three events, the rupture extends over about 1150, 150, and 200km, respectively. The events in 2004, 2005, and 2006 had source durations of at least 480s, 120s, and 180s, respectively. We observe unilateral rupture propagation for all events except for the rupture onset and the Nias event, where there is evidence for a bilateral start of the rupture. Whereas average rupture speed of the events in 2004 and 2005 is in the order of the S-wave speed (≈2.5-3km/s), unusually slow rupturing (≈1.5 km/s) is indicated for the July 2006 event. For the July 2006 event we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power generally increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.},
  language  = {en}
}
@article{RoesslerKruegerOhrnberger2007,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture propagation of the TsE (Mw7.7) on 17 July 2006 off-coast Java},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12964},
  year      = {2007},
  abstract  = {The Mw=7.7 tsunamogenic earthquake (TsE) on 17 July 2006, 08:19:28 shock the Indian Ocean at about 15 km depth off-coast Java, Indonesia. It caused a local tsunami with wave heights exceeding 2 m. The death toll reached several hundred. Thousands of people were displaced. By means of standard array methods, we have investigated the propagation and the extent of the rupture front of the causative earthquake. Waveform similarity is expressed by means of the semblance. We back-propagate the semblance for first-arrival phases recorded at broad-band stations within teleseismic distances (30°-95°). Image enhancement is realised by stacking the semblance of 8 arrays within different epicentral and azimuthal directions. From teleseismic observations we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE and source duration >125 s. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Unusually slow rupturing (≈1.5 km/s) is indicated. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.},
  language  = {en}
}
@misc{RoesslerHiemerBachetal.2009,
  author    = {R{\"o}ßler, Dirk and Hiemer, Stephan and Bach, Christoph and Delavaud, Elise and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Sauer, David and Scherbaum, Frank and Vollmer, Daniel},
  title     = {Small-aperture seismic array monitors Vogtland earthquake swarm in 2008/09},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29185},
  year      = {2009},
  abstract  = {The most recent intense earthquake swarm in the Vogtland lasted from 6 October 2008 until January 2009. Greatest magnitudes exceeded M3.5 several times in October making it the greatest swarm since 1985/86. In contrast to the swarms in 1985 and 2000, seismic moment release was concentrated near swarm onset. Focal area and temporal evolution are similar to the swarm in 2000. Work hypothysis: uprising upper-mantle fluids trigger swarm earthquakes at low stress level. To monitor the seismicity, the University of Potsdam operated a small aperture seismic array at 10 km epicentral distance between 18 October 2008 and 18 March 2009. Consisting of 12 seismic stations and 3 additional microphones, the array is capable of detecting earthquakes from larger to very low magnitudes (M<-1) as well as associated air waves. We use array techniques to determine properties of the incoming wavefield: noise, direct P and S waves, and converted phases.},
  language  = {en}
}
@misc{RoesslerKruegerOhrnbergeretal.2008,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Ehlert, Lutz},
  title     = {Automatic near real-time characterisation of large earthquakes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-20191},
  year      = {2008},
  abstract  = {An der Universit{\"a}t Potsdam wird seit 2008 ein automatisiertes Verfahren angewandt, um Bruchparamter großer Erdbeben in quasi-Echtzeit, d.h. wenige Minuten nachdem sich das Beben ereignet hat, zu bestimmen und der {\"O}ffentlichkeit via Internet zur Verf{\"u}gung zu stellen. Es ist vorgesehen, das System in das Deutsch-Indonesische Tsunamifr{\"u}hwarnsystem (GITEWS) zu integrieren, f{\"u}r das es speziell konfiguriert ist. Wir bestimmen insbesondere die Dauer und die Ausdehnung des Erdbebens, sowie dessen Bruchgeschwindigkeit und -richtung. Dabei benutzen wir die Seismogramme der zuerst eintreffenden P Wellen vom Breitbandstationen in teleseimischer Entfernung vom Beben sowie herk{\"o}mmliche Arrayverfahren in teilweise modifizierter Form. Die Semblance wir als {\"A}hnlichkeitsmaß verwendet, um Seismogramme eines Stationsnetzes zu vergleichen. Im Falle eines Erdbebens ist die Semblance unter Ber{\"u}cksichtigung des Hypozentrums zur Herdzeit und w{\"a}hrend des Bruchvorgangs deutlich zeitlich und r{\"a}umlich erh{\"o}ht und konzentriert. Indem wir die Ergebnisse verschiedener Stationsnetzwerke kombinieren, erreichen wir Unabh{\"a}ngigkeit von der Herdcharakteristik und eine raum-zeitliche Aufl{\"o}sung, die es erlaubt die o.g. Parameter abzuleiten. In unserem Beitrag skizzieren wir die Methode. Anhand der beiden M8.0 Benkulu Erdbeben (Sumatra, Indonesien) vom 12.09.2007 und dem M8.0 Sichuan Ereignis (China) vom 12.05.2008 demonstrieren wir Aufl{\"o}sungsm{\"o}glichkeiten und vergleichen die Ergebnisse der automatisierten Echtzeitanwendung mit nachtr{\"a}glichen Berechnungen. Weiterhin stellen wir eine Internetseite zur Verf{\"u}gung, die die Ergebnisse pr{\"a}sentiert und animiert. Diese kann z.B. in geowissenschaftlichen Einrichtungen an Computerterminals gezeigt werden. Die Internetauftritte haben die folgenden Adressen: http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack/openday http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack},
  language  = {en}
}
@misc{RoesslerKruegerOhrnberger2008,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Automatic near real-time characterisation of large earthquakes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-18382},
  year      = {2008},
  abstract  = {We use seismic array methods (semblance analysis) to image areas of seismic energy release in the Sunda Arc region and world-wide. Broadband seismograms at teleseismic distances (30° ≤ Δ ≤ 100°) are compared at several subarrays. Semblance maps of different subarrays are multiplied. High semblance tracked over long time (10s of second to minutes) and long distances indicate locations of earthquakes. The method allows resolution of rupture characteristics important for tsunami early warning: start and duration, velocity and direction, length and area. The method has been successfully applied to recent and historic events (M>6.5) and is now operational in real time. Results are obtained shortly after source time, see http://www.geo.uni-potsdam.de/Forschung/Geophysik/GITEWS/tsunami.htm). Comparison of manual and automatic processing are in good agreement. Computational effort is small. Automatic results may be obtained within 15 - 20 minutes after event occurrence.},
  language  = {en}
}
@misc{RoesslerKruegerOhrnberger2008,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture Propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29195},
  year      = {2008},
  abstract  = {We study the rupture propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake. We apply array techniques such as semblance vespagram analysis to P waves recorded at seismic broadband station within 30-100° epicentral distance. By combination of multiple large aperture station groups spatial and temporal resolution is enhanced and problems due source directivity and source mechanism are avoided. We find that seismic energy was released for at least 110 s. Propagating unilaterally at sub-shear rupture velocity of about 2.5 km/s in NE direction, the earthquake reaches a lateral extent of more than 300 km. Whereas high semblance during within 70 s from rupture start indicates simple propagation more complex source processes are indicated thereafter by decreases coherency in seismograms. At this stage of the event coherency is low but significantly above noise level. We emphasize that first result of our computations where obtain within 30 minutes after source time by using an atomized algorithm. This procedure has been routinely and globally applied to major earthquakes. Results are made public through internet.},
  language  = {en}
}
@article{LipkeZitzmannAmbergeretal.2007,
  author    = {Lipke, Katrin and Zitzmann, Max and Amberger, Manuel and Ehlert, Carsten and R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Traveltime residuals at regional and teleseismic distances for SE-Asia},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-14117},
  year      = {2007},
  abstract  = {Traveltime residuals for worldwide seismic stations are calculated. We use P and S waves from earthquakes in SE-Asia at teleseismic and regional distances. The obtained station residuals help to enhance earthquake localisation. Furthermore we calculated regional source dependent station residuals. They show a systematic dependence of the locality of the source. These source dependent residuals reflect heterogenities along the path and can be used for a refinement of earthquake localisation.},
  language  = {en}
}
@article{KrugerOhrnberger2005,
  author    = {Kruger, Frank and Ohrnberger, Matthias},
  title     = {Tracking the rupture of the M-w=9.3 Sumatra earthquake over 1,150 km at teleseismic distance},
  issn      = {0028-0836},
  year      = {2005},
  abstract  = {On 26 December 2004, a moment magnitude M-w = 9.3 earthquake occurred along Northern Sumatra, the Nicobar and Andaman islands, resulting in a devastating tsunami in the Indian Ocean region(1). The rapid and accurate estimation of the rupture length and direction of such tsunami-generating earthquakes is crucial for constraining both tsunami wave- height models as well as the seismic moment of the events. Compressional seismic waves generated at the hypocentre of the Sumatra earthquake arrived after about 12 min at the broadband seismic stations of the German Regional Seismic Network (GRSN)(2,3), located approximately 9,000 km from the event. Here we present a modification of a standard array- seismological approach and show that it is possible to track the propagating rupture front of the Sumatra earthquake over a total rupture length of 1,150 km. We estimate the average rupture speed to be 2.3-2.7 km s(-1) and the total duration of rupture to be at least 430 s, and probably between 480 and 500 s.},
  language  = {en}
}
@article{KruegerOhrnberger2005,
  author    = {Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Spatio-temporal source characteristics of the 26 December 2004 Sumatra earthquake as imaged by teleseismic broadband arrays},
  year      = {2005},
  abstract  = {We test the capability of broadband arrays at teleseismic distances to image the spatio-temporal characteristics of the seismic energy release during the Dec 26, 2004 Sumatra earthquake at early observation times. Using a non-plane-wave array location technique previously reported values for rupture length (about 1150 km), duration (about 480 s), and average rupture velocity (2.4-2.7 km/s) are confirmed. Three dominant energy releases are identified: one near the hypocenter, a second at 6 degrees N94 degrees E about 130 s later and a third one after 300 s at 9 degrees N92-93 degrees E. The spatio-temporal distribution of the radiated seismic energy in the source region is calculated from the stacked broadband recordings of two arrays in Germany and Japan and results in rough estimates of the total seismic energy of 0.55.10(18) Nm (GRSN) and 1.53.10(18) Nm (FNET) respectively. Changes in the relative ratio of energy as function of spatio-temporal location indicate a rotation of the focal mechanism during the rupture process},
  language  = {en}
}