@article{GaalSchickHerzogetal.2014, author = {Gaal, Peter and Schick, Daniel and Herzog, Marc and Bojahr, Andre and Shayduk, Roman and Goldshteyn, Jevgeni and Leitenberger, Wolfram and Vrejoiu, Ionela and Khakhulin, Dmitry and Wulff, Michael and Bargheer, Matias}, title = {Ultrafast switching of hard X-rays}, series = {Journal of synchrotron radiation}, volume = {21}, journal = {Journal of synchrotron radiation}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0909-0495}, doi = {10.1107/S1600577513031949}, pages = {380 -- 385}, year = {2014}, abstract = {A new concept for shortening hard X-ray pulses emitted from a third-generation synchrotron source down to few picoseconds is presented. The device, called the PicoSwitch, exploits the dynamics of coherent acoustic phonons in a photo-excited thin film. A characterization of the structure demonstrates switching times of <= 5 ps and a peak reflectivity of similar to 10(-3). The device is tested in a real synchrotron-based pump-probe experiment and reveals features of coherent phonon propagation in a second thin film sample, thus demonstrating the potential to significantly improve the temporal resolution at existing synchrotron facilities.}, language = {en} } @article{SchickShaydukBojahretal.2013, author = {Schick, Daniel and Shayduk, Roman and Bojahr, Andre and Herzog, Marc and von Korff Schmising, Clemens and Gaal, Peter and Bargheer, Matias}, title = {Ultrafast reciprocal-space mapping with a convergent beam}, series = {JOURNAL OF APPLIED CRYSTALLOGRAPHY}, volume = {46}, journal = {JOURNAL OF APPLIED CRYSTALLOGRAPHY}, number = {10}, publisher = {WILEY-BLACKWELL}, address = {HOBOKEN}, issn = {0021-8898}, doi = {10.1107/S0021889813020013}, pages = {1372 -- 1377}, year = {2013}, abstract = {A diffractometer setup is presented, based on a laser-driven plasma X-ray source for reciprocal-space mapping with femtosecond temporal resolution. In order to map out the reciprocal space, an X-ray optic with a convergent beam is used with an X-ray area detector to detect symmetrically and asymmetrically diffracted X-ray photons simultaneously. The setup is particularly suited for measuring thin films or imperfect bulk samples with broad rocking curves. For quasi-perfect crystalline samples with insignificant in-plane Bragg peak broadening, the measured reciprocal-space maps can be corrected for the known resolution function of the diffractometer in order to achieve high-resolution rocking curves with improved data quality. In this case, the resolution of the diffractometer is not limited by the convergence of the incoming X-ray beam but is solely determined by its energy bandwidth.}, language = {en} } @article{PudellvonReppertSchicketal.2019, author = {Pudell, Jan-Etienne and von Reppert, Alexander and Schick, D. and Zamponi, F. and R{\"o}ssle, Matthias and Herzog, Marc and Zabel, Hartmut and Bargheer, Matias}, title = {Ultrafast negative thermal expansion driven by spin disorder}, series = {Physical review : B, Condensed matter and materials physics}, volume = {99}, journal = {Physical review : B, Condensed matter and materials physics}, number = {9}, publisher = {American Physical Society}, address = {College Park}, issn = {2469-9950}, doi = {10.1103/PhysRevB.99.094304}, pages = {7}, year = {2019}, abstract = {We measure the transient strain profile in a nanoscale multilayer system composed of yttrium, holmium, and niobium after laser excitation using ultrafast x-ray diffraction. The strain propagation through each layer is determined by transient changes in the material-specific Bragg angles. We experimentally derive the exponentially decreasing stress profile driving the strain wave and show that it closely matches the optical penetration depth. Below the Neel temperature of Ho, the optical excitation triggers negative thermal expansion, which is induced by a quasi-instantaneous contractive stress and a second contractive stress contribution increasing on a 12-ps timescale. These two timescales were recently measured for the spin disordering in Ho [Rettig et al., Phys. Rev. Lett. 116, 257202 (2016)]. As a consequence, we observe an unconventional bipolar strain pulse with an inverted sign traveling through the heterostructure.}, language = {en} } @article{HerzogLeitenbergerShayduketal.2010, author = {Herzog, Marc and Leitenberger, Wolfram and Shayduk, Roman and van der Veen, Renske Marjan and Milne, Chris J. and Johnson, Steven Lee and Vrejoiu, Ionela and Alexe, Marin and Hesse, Dietrich and Bargheer, Matias}, title = {Ultrafast manipulation of hard x-rays by efficient Bragg switches}, issn = {0003-6951}, doi = {10.1063/1.3402773}, year = {2010}, abstract = {We experimentally demonstrate efficient switching of the hard x-ray Bragg reflectivity of a SrRuO3 /SrTiO3 superlattice by optical excitation of large-amplitude coherent acoustic superlattice phonons. The rocking curve changes drastically on a 1 ps timescale. The (0 0 116) reflection is almost extinguished (Delta R/R-0=-0.91), while the (0 0 118) reflection increases by more than an order of magnitude (Delta R/R-0=24.1). The change of the x-ray structure factor depends nonlinearly on the phonon amplitude, allowing manipulation of the x-ray response on a timescale considerably shorter than the phonon period. Numerical simulations for a superlattice with slightly changed geometry and realistic parameters predict a switching-contrast ratio Delta R/R-0 of 700 with high reflectivity.}, language = {en} } @article{SchickHerzogBojahretal.2014, author = {Schick, Daniel and Herzog, Marc and Bojahr, Andre and Leitenberger, Wolfram and Hertwig, Andreas and Shayduk, Roman and Bargheer, Matias}, title = {Ultrafast lattice response of photoexcited thin films studied by X-ray diffraction}, series = {Structural dynamics}, volume = {1}, journal = {Structural dynamics}, number = {6}, publisher = {American Institute of Physics}, address = {Melville}, issn = {2329-7778}, doi = {10.1063/1.4901228}, pages = {13}, year = {2014}, abstract = {Using ultrafast X-ray diffraction, we study the coherent picosecond lattice dynamics of photoexcited thin films in the two limiting cases, where the photoinduced stress profile decays on a length scale larger and smaller than the film thickness. We solve a unifying analytical model of the strain propagation for acoustic impedance-matched opaque films on a semi-infinite transparent substrate, showing that the lattice dynamics essentially depend on two parameters: One for the spatial profile and one for the amplitude of the strain. We illustrate the results by comparison with high-quality ultrafast X-ray diffraction data of SrRuO3 films on SrTiO3 substrates. (C) 2014 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution 3.0 Unported License.}, language = {en} } @article{vonReppertWilligPudelletal.2018, author = {von Reppert, Alexander and Willig, Lisa and Pudell, Jan-Etienne and Roessle, M. and Leitenberger, Wolfram and Herzog, Marc and Ganss, F. and Hellwig, O. and Bargheer, Matias}, title = {Ultrafast laser generated strain in granular and continuous FePt thin films}, series = {Applied physics letters}, volume = {113}, journal = {Applied physics letters}, number = {12}, publisher = {American Institute of Physics}, address = {Melville}, issn = {0003-6951}, doi = {10.1063/1.5050234}, pages = {5}, year = {2018}, abstract = {We employ ultrafast X-ray diffraction to compare the lattice dynamics of laser-excited continuous and granular FePt films on MgO (100) substrates. Contrary to recent results on free-standing granular films, we observe in both cases a pronounced and long-lasting out-of-plane expansion. We attribute this discrepancy to the in-plane expansion, which is suppressed by symmetry in continuous films. Granular films on substrates are less constrained and already show a reduced out-of-plane contraction. Via the Poisson effect, out-of-plane contractions drive in-plane expansion and vice versa. Consistently, the granular film exhibits a short-lived out-of-plane contraction driven by ultrafast demagnetization which is followed by a reduced and delayed expansion. From the acoustic reflections of the observed strain waves at the film-substrate interface, we extract a 13\% reduction of the elastic constants in thin 10 nm FePt films compared to bulk-like samples. (C) 2018 Author(s).}, language = {en} } @article{MorHerzogGolezetal.2017, author = {Mor, Selene and Herzog, Marc and Golez, Denis and Werner, Philipp and Eckstein, Martin and Katayama, Naoyuki and Nohara, Minoru and Takagi, Hide and Mizokawa, Takashi and Monney, Claude and Staehler, Julia}, title = {Ultrafast Electronic Band Gap Control in an Excitonic Insulator}, series = {Physical review letters}, volume = {119}, journal = {Physical review letters}, publisher = {American Physical Society}, address = {College Park}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.119.086401}, pages = {11559 -- 11567}, year = {2017}, abstract = {We report on the nonequilibrium dynamics of the electronic structure of the layered semiconductor Ta2NiSe5 investigated by time-and angle-resolved photoelectron spectroscopy. We show that below the critical excitation density of F-C = 0.2 mJ cm(-2), the band gap narrows transiently, while it is enhanced above FC. Hartree-Fock calculations reveal that this effect can be explained by the presence of the low-temperature excitonic insulator phase of Ta2NiSe5, whose order parameter is connected to the gap size. This work demonstrates the ability to manipulate the band gap of Ta2NiSe5 with light on the femtosecond time scale.}, language = {en} } @article{SchickBojahrHerzogetal.2014, author = {Schick, Daniel and Bojahr, Andre and Herzog, Marc and Shayduk, Roman and von Korff Schmising, Clemens and Bargheer, Matias}, title = {Udkm1Dsim-A simulation toolkit for 1D ultrafast dynamics in condensed matter}, series = {Computer physics communications : an international journal devoted to computational physics and computer programs in physics}, volume = {185}, journal = {Computer physics communications : an international journal devoted to computational physics and computer programs in physics}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0010-4655}, doi = {10.1016/j.cpc.2013.10.009}, pages = {651 -- 660}, year = {2014}, abstract = {The UDKM1DSIM toolbox is a collection of MATLAB (MathWorks Inc.) classes and routines to simulate the structural dynamics and the according X-ray diffraction response in one-dimensional crystalline sample structures upon an arbitrary time-dependent external stimulus, e.g. an ultrashort laser pulse. The toolbox provides the capabilities to define arbitrary layered structures on the atomic level including a rich database of corresponding element-specific physical properties. The excitation of ultrafast dynamics is represented by an N-temperature model which is commonly applied for ultrafast optical excitations. Structural dynamics due to thermal stress are calculated by a linear-chain model of masses and springs. The resulting X-ray diffraction response is computed by dynamical X-ray theory. The UDKM1DSIM toolbox is highly modular and allows for introducing user-defined results at any step in the simulation procedure. Program summary Program title: udkm1Dsim Catalogue identifier: AERH_v1_0 Program summary URL: http://cpc.cs.qub.ac.uk/summaries/AERH_v1_0.html Licensing provisions: BSD No. of lines in distributed program, including test data, etc.: 130221 No. of bytes in distributed program, including test data, etc.: 2746036 Distribution format: tar.gz Programming language: Matlab (MathWorks Inc.). Computer: PC/Workstation. Operating system: Running Matlab installation required (tested on MS Win XP -7, Ubuntu Linux 11.04-13.04). Has the code been vectorized or parallelized?: Parallelization for dynamical XRD computations. Number of processors used: 1-12 for Matlab Parallel Computing Toolbox; 1 - infinity for Matlab Distributed Computing Toolbox External routines: Optional: Matlab Parallel Computing Toolbox, Matlab Distributed Computing Toolbox Required (included in the package): mtimesx Fast Matrix Multiply for Matlab by James Tursa, xml io tools by Jaroslaw Tuszynski, textprogressbar by Paul Proteus Nature of problem: Simulate the lattice dynamics of 1D crystalline sample structures due to an ultrafast excitation including thermal transport and compute the corresponding transient X-ray diffraction pattern. Solution method: Restrictions: The program is restricted to 1D sample structures and is further limited to longitudinal acoustic phonon modes and symmetrical X-ray diffraction geometries. Unusual features: The program is highly modular and allows the inclusion of user-defined inputs at any time of the simulation procedure. Running time: The running time is highly dependent on the number of unit cells in the sample structure and other simulation parameters such as time span or angular grid for X-ray diffraction computations. However, the example files are computed in approx. 1-5 min each on a 8 Core Processor with 16 GB RAM available.}, language = {en} } @article{ZeuschnerParpiievPezeriletal.2019, author = {Zeuschner, Steffen and Parpiiev, Tymur and Pezeril, Thomas and Hillion, Arnaud and Dumesnil, Karine and Anane, Abdelmadjid and Pudell, Jan-Etienne and Willig, Lisa and R{\"o}ssle, Matthias and Herzog, Marc and von Reppert, Alexander and Bargheer, Matias}, title = {Tracking picosecond strain pulses in heterostructures that exhibit giant magnetostriction}, series = {Structural Dynamics}, volume = {6}, journal = {Structural Dynamics}, number = {2}, publisher = {AIP Publishing LLC}, address = {Melville, NY}, issn = {2329-7778}, doi = {10.1063/1.5084140}, pages = {9}, year = {2019}, abstract = {We combine ultrafast X-ray diffraction (UXRD) and time-resolved Magneto-Optical Kerr Effect (MOKE) measurements to monitor the strain pulses in laser-excited TbFe2/Nb heterostructures. Spatial separation of the Nb detection layer from the laser excitation region allows for a background-free characterization of the laser-generated strain pulses. We clearly observe symmetric bipolar strain pulses if the excited TbFe2 surface terminates the sample and a decomposition of the strain wavepacket into an asymmetric bipolar and a unipolar pulse, if a SiO2 glass capping layer covers the excited TbFe2 layer. The inverse magnetostriction of the temporally separated unipolar strain pulses in this sample leads to a MOKE signal that linearly depends on the strain pulse amplitude measured through UXRD. Linear chain model simulations accurately predict the timing and shape of UXRD and MOKE signals that are caused by the strain reflections from multiple interfaces in the heterostructure.}, language = {en} } @misc{ZeuschnerParpiievPezeriletal.2019, author = {Zeuschner, Steffen and Parpiiev, Tymur and Pezeril, Thomas and Hillion, Arnaud and Dumesnil, Karine and Anane, Abdelmadjid and Pudell, Jan-Etienne and Willig, Lisa and R{\"o}ssle, Matthias and Herzog, Marc and von Reppert, Alexander and Bargheer, Matias}, title = {Tracking picosecond strain pulses in heterostructures that exhibit giant magnetostriction}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-naturwissenschaftliche Reihe}, number = {706}, issn = {1866-8372}, doi = {10.25932/publishup-42845}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-428457}, pages = {9}, year = {2019}, abstract = {We combine ultrafast X-ray diffraction (UXRD) and time-resolved Magneto-Optical Kerr Effect (MOKE) measurements to monitor the strain pulses in laser-excited TbFe2/Nb heterostructures. Spatial separation of the Nb detection layer from the laser excitation region allows for a background-free characterization of the laser-generated strain pulses. We clearly observe symmetric bipolar strain pulses if the excited TbFe2 surface terminates the sample and a decomposition of the strain wavepacket into an asymmetric bipolar and a unipolar pulse, if a SiO2 glass capping layer covers the excited TbFe2 layer. The inverse magnetostriction of the temporally separated unipolar strain pulses in this sample leads to a MOKE signal that linearly depends on the strain pulse amplitude measured through UXRD. Linear chain model simulations accurately predict the timing and shape of UXRD and MOKE signals that are caused by the strain reflections from multiple interfaces in the heterostructure.}, language = {en} }