@article{SchmidtRiemer2014, author = {Schmidt, Bernd and Riemer, Martin}, title = {Suzuki-Miyaura coupling of halophenols and phenol boronic acids: systematic investigation of positional isomer effects and conclusions for the synthesis of phytoalexins from Pyrinae}, series = {The journal of organic chemistry}, volume = {79}, journal = {The journal of organic chemistry}, number = {9}, publisher = {American Chemical Society}, address = {Washington}, issn = {0022-3263}, doi = {10.1021/jo500675a}, pages = {4104 -- 4118}, year = {2014}, abstract = {The Suzuki-Miyaura couplings of o-, m-, and p-halophenols with o-, m-, and p-phenol boronic acids were investigated for all combinations under standardized conditions, using Pd/C as a heterogeneous catalyst and water as a solvent. In the case of iodophenols, conventional heating was used, while for bromophenols significantly better results could be obtained using microwave irradiation. This systematic study revealed that 2,4'-biphenol is particularly difficult to access, irrespective of the starting materials used, but that these difficulties can be overcome by using different additives. The conclusions drawn from this investigation allowed us to identify conditions for the protecting group-free or minimized total synthesis of biaryl-type phytoalexins. These compounds possess antibacterial activity and are produced by fruit trees as a response to microbial infection.}, language = {en} } @article{StumpeSakhnoGritsaietal.2014, author = {Stumpe, Joachim and Sakhno, O. and Gritsai, Y. and Rosenhauer, R. and Fischer, Th. and Rutloh, Michael and Schaal, F. and Weidenfeld, S. and Jetter, M. and Michler, P. and Pruss, C. and Osten, W.}, title = {Active and passive LC based polarization elements}, series = {Molecular crystals and liquid crystals}, volume = {594}, journal = {Molecular crystals and liquid crystals}, number = {1}, publisher = {Routledge, Taylor \& Francis Group}, address = {Abingdon}, issn = {1542-1406}, doi = {10.1080/15421406.2014.917503}, pages = {140 -- 149}, year = {2014}, abstract = {Passive and active polarization elements were created by surface and bulk photo-alignment of LCs, reactive LCs, photo-sensitive LCP and photo-curable monomer/LC composites. The use of different photo-sensitive liquid crystalline materials for the development of highly anisotropic elements with high spatial resolution and stability or, alternatively, fast switch ability will be discussed. Photo-active and voltage tunable polarization and diffraction elements are presented. For active micro-optic application a photo-addressed patterned retarder was created. Electrically switchable diffraction gratings were generated by interference exposure of photo-curable LC composites at room temperature characterized by droplet free morphology. These polarization sensitive diffraction elements are characterized be excellent optical properties and low switching times.}, language = {en} } @article{HasinovicBoggsFribergetal.2014, author = {Hasinovic, Hida and Boggs, Cami and Friberg, Stig E. and Kovach, Ildiko and Koetz, Joachim}, title = {Janus emulsions from a one-step process; optical microscopy images}, series = {Journal of dispersion science and technology}, volume = {35}, journal = {Journal of dispersion science and technology}, number = {5}, publisher = {Taylor \& Francis Group}, address = {Philadelphia}, issn = {0193-2691}, doi = {10.1080/01932691.2013.801019}, pages = {613 -- 618}, year = {2014}, abstract = {The optical microscopy images of an emulsion are commonly distorted when viewed between a cover glass and a planar microscopy slide. An alternative method is to place the sample on a slide with a cavity, which in turn suffers from incomplete information for high internal phase ratio (HIPR) emulsions, due to the inevitable crowding of the drops. This problem is particularly acute for more complex emulsions, such as those with Janus drops, for which a detailed image of the drop is essential. A number of publications have recently described Janus emulsions prepared by a one-step high energy emulsification process with microscopy images obtained by the sample between a planar slide and a cover glass. The correlation to the morphology of emulsions in bulk of these images is critical, but, so far, a potential equivalence has not been established. Since the images are central in order to understand why Janus emulsions should form under such conditions, the need to ascertain any such association is urgent. With this contribution, we compare images from different microscopy methods to those of gently diluted HIPR emulsions. The results reveal that the images of the emulsion samples between a cover glass and a planar microscope slide actually present a realistic representation of the drop topology in bulk emulsions.}, language = {en} } @article{SchmidtHauke2014, author = {Schmidt, Bernd and Hauke, Sylvia}, title = {Olefin cross metathesis based de novo synthesis of a partially protected L-amicetose and a fully protected L-cinerulose derivative}, series = {Beilstein journal of organic chemistry}, volume = {10}, journal = {Beilstein journal of organic chemistry}, publisher = {Beilstein-Institut zur F{\"o}rderung der Chemischen Wissenschaften}, address = {Frankfurt, Main}, issn = {1860-5397}, doi = {10.3762/bjoc.10.102}, pages = {1023 -- 1031}, year = {2014}, abstract = {Cross metathesis of a lactate derived allylic alcohol and acrolein is the entry point to a de novo synthesis of 4-benzoate protected L-amicetose and a cinerulose derivative protected at C5 and C1.}, language = {en} } @article{SchmidtHaukeMuehlenberg2014, author = {Schmidt, Bernd and Hauke, Sylvia and Muehlenberg, Nino}, title = {Imino glycals via Ruthenium-catalyzed RCM and isomerization}, series = {Synthesis}, volume = {46}, journal = {Synthesis}, number = {12}, publisher = {Thieme}, address = {Stuttgart}, issn = {0039-7881}, doi = {10.1055/s-0033-1338615}, pages = {1648 -- 1658}, year = {2014}, abstract = {N-Allyl-N-homoallylamines were converted in one step into cyclic enamides via a ruthenium-catalyzed assisted tandem catalytic ring-closing metathesis-isomerization sequence. The sequence relies on the in situ transformation of a metathesis active Ru-carbene into an isomerization active Ru-hydride by addition of hydroxide as a chemical trigger.}, language = {en} } @article{BaierMetznerKoerzdoerferetal.2014, author = {Baier, Heiko and Metzner, Philipp and K{\"o}rzd{\"o}rfer, Thomas and Kelling, Alexandra and Holdt, Hans-J{\"u}rgen}, title = {Efficient palladium(II) precatalysts bearing 4,5-dicyanoimidazol-2-ylidene for the Mizoroki-Heck reaction}, series = {European journal of inorganic chemistry : a journal of ChemPubSoc Europe}, journal = {European journal of inorganic chemistry : a journal of ChemPubSoc Europe}, number = {18}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1434-1948}, doi = {10.1002/ejic.201402040}, pages = {2952 -- 2960}, year = {2014}, abstract = {The new N-heterocyclic carbene (NHC) complex [PdCl2{(CN)(2)IMes}(PPh3)] (2) ({(CN)(2)IMes}: 4,5-dicyano-1,3-dimesitylimidazol-2-ylidene) and the NHC palladacycle [PdCl(dmba){(CN)(2)IMes}] (3) (dmba: N,N-dimethylbenzylamine) have been synthesized by thermolysis of 4,5-dicyano-1,3-dimesityl-2-(pentafluorophenyl) imidazoline (1) in the presence of suitable palladium(II) precursors. The acyclic complex 2 was formed by ligand exchange using the mononuclear precursor [PdCl2(PPh3)(2)] and the palladacycle 3 was formed by cleavage of the dinuclear chloro-bridged precursor [Pd(mu-Cl)(dmba)](2). The new NHC precursor 1-benzyl-4,5-dicyano-2-(pentafluorophenyl)-3-picolylimidazoline (5) was formed by condensation of pentafluorobenzaldehyde with N-benzyl-N'-picolyldiaminomaleonitrile (4). The NHC palladacycle [PdCl2{(CN)(2)IBzPic}] (6) ({(CN)(2)IBzPic}: 1-benzyl-4,5-dicyano-3-picolylimidazol-2-ylidene) was prepared by in situ thermolysis of 5 in the presence of [PdCl2(PhCN)(2)]. The three palladium(II) complexes were characterized by NMR and IR spectroscopy, mass spectrometry and elemental analysis. In addition, the molecular structures of 2 and 3 were determined by X-ray diffraction. The pi-acidity of (CN)(2)IBzPic was compared with (CN)(2)IMes and perviously reported pi-acidic imidazol-2-ylidenes by NBO analysis. The Mizoroki-Heck (MH) reactions of various aryl halides with n-butyl acrylate were performed in the presence of complexes 2, 3 and 6. The new precatalysts showed high activity in the MH reactions giving good-to-excellent product yields with 0.1 mol-\% pre-catalyst. The nature of the catalytically active species of 2, 3 and 6 was investigated by poisoning experiments with mercury and transmission electron microscopy. It was found that palladium nanoparticles formed from the precatalysts were involved in the catalytic process.}, language = {en} } @article{MondalMuellerJungingeretal.2014, author = {Mondal, Suvendu Sekhar and Mueller, Holger and Junginger, Matthias and Kelling, Alexandra and Schilde, Uwe and Strehmel, Veronika and Holdt, Hans-J{\"u}rgen}, title = {Imidazolium 2-substituted 4,5-dicyanoimidazolate ionic liquids: synthesis, crystal structures and structure-thermal property relationships}, series = {Chemistry - a European journal}, volume = {20}, journal = {Chemistry - a European journal}, number = {26}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {0947-6539}, doi = {10.1002/chem.201304934}, pages = {8170 -- 8181}, year = {2014}, abstract = {Thirty six novel ionic liquids (ILs) with 1-butyl-3-methylimidazolium and 3-methyl-1-octylimidazolium cations paired with 2-substitited 4,5-dicyanoimidazolate anions (substituent at C2=chloro, bromo, methoxy, vinyl, amino, methyl, ethyl, propyl, isopropyl, butyl, pentyl, hexyl, heptyl, octyl, nonyl, decyl, undecyl and phenyl) have been synthesized and characterized by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and single-crystal X-ray crystallography. The effects of cation and anion type and structure on the thermal properties of the resulting ionic liquids, including several room temperature ionic liquids (RTILs) are examined and discussed. ILs exhibited large liquid and crystallization ranges and formed glasses on cooling with glass transition temperatures in the range of -22 to -68 degrees C. The effects of alkyl substituents of the imidazolate anion reflected the crystallization, melting points and thermal decomposition of the ILs. The Coulombic packing force, van der Waals forces and size of the anions can be considered for altering the thermal transitions. Three crystal structures of the ILs were determined and the effects of changes to the cations and anions on the packing of the structure were investigated.}, language = {en} } @article{PiekarczykBaldFlosadottiretal.2014, author = {Piekarczyk, Andreas and Bald, Ilko and Flosadottir, Helga D. and Omarsson, Benedikt and Lafosse, Anne and Ingolfsson, Oddur}, title = {Influence of metal ion complexation on the metastable fragmentation of DNA hexamers}, series = {The European physical journal : D, Atomic, molecular, optical and plasma physics}, volume = {68}, journal = {The European physical journal : D, Atomic, molecular, optical and plasma physics}, number = {6}, publisher = {Springer}, address = {New York}, issn = {1434-6060}, doi = {10.1140/epjd/e2014-40838-7}, pages = {7}, year = {2014}, abstract = {Here, we study the metastable decay of 5'-d(TTGCTT) in the presence of 0-6 alkaline metal ions (Li+, Na+, K+, Rb+) and 0-3 alkaline earth metal ions (Mg2+ and Ca2+), which replace the corresponding number of protons in the oligonucleotide. We find that all ions studied here stabilize the oligonucleotide with respect to simple 3'-C-O backbone cleavage, but at the same time these metal ions promote a central oligonucleotide deletion accompanied by a concomitant recombination of the terminal d(TT) groups. We find that the quenching of the 3'-C-O backbone cleavage is not ion specific, since it is due to the removal of the phosphate protons upon replacement with the respective metal ions. The central nucleotide deletion competes with the 3'-C-O backbone cleavage channels and is thus promoted through the replacement of the exchangeable protons against metal ions. However, with increasing positive charge density of the metal ions the yield of the central nucleotide deletion further increases. We attribute this effect to the necessity of sufficient proximity of the terminal d(TT) group to allow for their recombination on this reaction path. Hence, the formation of a reactive conformer is mediated by the metal ions.}, language = {en} } @article{KirschWirthTongetal.2014, author = {Kirsch, Harald and Wirth, Jonas and Tong, Yujin and Wolf, Martin and Saalfrank, Peter and Campen, Richard Kramer}, title = {Experimental characterization of unimolecular water dissociative adsorption on alpha-alumina}, series = {The journal of physical chemistry : C, Nanomaterials and interfaces}, volume = {118}, journal = {The journal of physical chemistry : C, Nanomaterials and interfaces}, number = {25}, publisher = {American Chemical Society}, address = {Washington}, issn = {1932-7447}, doi = {10.1021/jp502106t}, pages = {13623 -- 13630}, year = {2014}, abstract = {alpha-Al2O3 surfaces are common in both engineered applications and the environment. Much prior work indicates that their properties, e.g., reactivity, polarity, and charge, change dramatically on interaction with water. Perhaps the simplest question that can be asked of alpha-Al2O3/water interaction is how a single water molecule interacts with the most stable alpha-Al2O3 surface: the alpha-Al2O3(0001). Over the last 15 years, a series of theoretical studies have found that water dissociatively adsorbs on alpha-Al2O3(0001) through two channels. However, to our knowledge no experimental evidence of these dissociation pathways has appeared. By combining sample preparation via supersonic molecular beam dosing, sample characterization via coherent, surface specific vibrational spectroscopy and electronic structure theory, we report the first experimental observation of reaction products of each, theoretically predicted, dissociation channel. These results thus overcome a 15 year old experiment/theory disconnect and make possible a variety of intriguing experiments that promise to provide significant new insights into water/Al2O3 and water/oxide interaction more generally.}, language = {en} } @article{YuAstYuetal.2014, author = {Yu, Mingfeng and Ast, Sandra and Yu, Qun and Lo, Anthony T. S. and Flehr, Roman and Todd, Matthew H. and Rutledge, Peter J.}, title = {Incorporating a piperidinyl group in the fluorophore extends the fluorescence lifetime of click-derived cyclam-naphthalimide conjugates}, series = {PLoS one}, volume = {9}, journal = {PLoS one}, number = {7}, publisher = {PLoS}, address = {San Fransisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0100761}, pages = {12}, year = {2014}, abstract = {Ligands incorporating a tetraazamacrocycle receptor, a 'click'-derived triazole and a 1,8-naphthalimide fluorophore have proven utility as probes for metal ions. Three new cyclam-based molecular probes are reported, in which a piperidinyl group has been introduced at the 4-position of the naphthalimide fluorophore. These compounds have been synthesized using the copper(I)-catalyzed azide-alkyne Huisgen cycloaddition and their photophysical properties studied in detail. The alkylamino group induces the expected red-shift in absorption and emission spectra relative to the simple naphthalimide derivatives and gives rise to extended fluorescence lifetimes in aqueous buffer. The photophysical properties of these systems are shown to be highly solvent-dependent. Screening the fluorescence responses of the new conjugates to a wide variety of metal ions reveals significant and selective fluorescence quenching in the presence of copper(II), yet no fluorescence enhancement with zinc(II) as observed previously for the simple naphthalimide derivatives. Reasons for this different behaviour are proposed. Cytotoxicity testing shows that these new cyclam-triazole-dye conjugates display little or no toxicity against either DLD-1 colon carcinoma cells or MDA-MB-231 breast carcinoma cells, suggesting a potential role for these and related systems in biological sensing applications.}, language = {en} }