@misc{YarmanKurbanogluJetzschmannetal.2018, author = {Yarman, Aysu and Kurbanoglu, Sevinc and Jetzschmann, Katharina J. and Ozkan, Sibel A. and Wollenberger, Ulla and Scheller, Frieder W.}, title = {Electrochemical MIP-Sensors for Drugs}, series = {Current Medicinal Chemistry}, volume = {25}, journal = {Current Medicinal Chemistry}, number = {33}, publisher = {Bentham Science Publishers LTD}, address = {Sharjah}, issn = {0929-8673}, doi = {10.2174/0929867324666171005103712}, pages = {4007 -- 4019}, year = {2018}, abstract = {In order to replace bio-macromolecules by stable synthetic materials in separation techniques and bioanalysis biomimetic receptors and catalysts have been developed: Functional monomers are polymerized together with the target analyte and after template removal cavities are formed in the "molecularly imprinted polymer" (MIP) which resemble the active sites of antibodies and enzymes. Starting almost 80 years ago, around 1,100 papers on MIPs were published in 2016. Electropolymerization allows to deposit MIPs directly on voltammetric electrodes or chips for quartz crystal microbalance (QCM) and surface plasmon resonance (SPR). For the readout of MIPs for drugs amperometry, differential pulse voltammetry (DPV) and impedance spectroscopy (EIS) offer higher sensitivity as compared with QCM or SPR. Application of simple electrochemical devices allows both the reproducible preparation of MIP sensors, but also the sensitive signal generation. Electrochemical MIP-sensors for the whole arsenal of drugs, e.g. the most frequently used analgesics, antibiotics and anticancer drugs have been presented in literature and tested under laboratory conditions. These biomimetic sensors typically have measuring ranges covering the lower nano-up to millimolar concentration range and they are stable under extreme pH and in organic solvents like nonaqueous extracts.}, language = {en} } @misc{YarmanJetzschmannNeumannetal.2017, author = {Yarman, Aysu and Jetzschmann, Katharina J. and Neumann, Bettina and Zhang, Xiaorong and Wollenberger, Ulla and Cordin, Aude and Haupt, Karsten and Scheller, Frieder W.}, title = {Enzymes as Tools in MIP-Sensors}, series = {Chemosensors}, volume = {5}, journal = {Chemosensors}, publisher = {MDPI}, address = {Basel}, issn = {2227-9040}, doi = {10.3390/chemosensors5020011}, pages = {16}, year = {2017}, abstract = {Molecularly imprinted polymers (MIPs) have the potential to complement antibodies in bioanalysis, are more stable under harsh conditions, and are potentially cheaper to produce. However, the affinity and especially the selectivity of MIPs are in general lower than those of their biological pendants. Enzymes are useful tools for the preparation of MIPs for both low and high-molecular weight targets: As a green alternative to the well-established methods of chemical polymerization, enzyme-initiated polymerization has been introduced and the removal of protein templates by proteases has been successfully applied. Furthermore, MIPs have been coupled with enzymes in order to enhance the analytical performance of biomimetic sensors: Enzymes have been used in MIP-sensors as tracers for the generation and amplification of the measuring signal. In addition, enzymatic pretreatment of an analyte can extend the analyte spectrum and eliminate interferences.}, language = {en} } @article{YarmanGroebeNeumannetal.2012, author = {Yarman, Aysu and Gr{\"o}be, Glenn and Neumann, Bettina and Kinne, Mathias and Gajovic-Eichelmann, Nenad and Wollenberger, Ursula and Hofrichter, Martin and Ullrich, Rene and Scheibner, Katrin and Scheller, Frieder W.}, title = {The aromatic peroxygenase from Marasmius rutola-a new enzyme for biosensor applications}, series = {Analytical \& bioanalytical chemistry}, volume = {402}, journal = {Analytical \& bioanalytical chemistry}, number = {1}, publisher = {Springer}, address = {Heidelberg}, issn = {1618-2642}, doi = {10.1007/s00216-011-5497-y}, pages = {405 -- 412}, year = {2012}, abstract = {The aromatic peroxygenase (APO; EC 1.11.2.1) from the agraric basidomycete Marasmius rotula (MroAPO) immobilized at the chitosan-capped gold-nanoparticle-modified glassy carbon electrode displayed a pair of redox peaks with a midpoint potential of -278.5 mV vs. AgCl/AgCl (1 M KCl) for the Fe(2+)/Fe(3+) redox couple of the heme-thiolate-containing protein. MroAPO oxidizes aromatic substrates such as aniline, p-aminophenol, hydroquinone, resorcinol, catechol, and paracetamol by means of hydrogen peroxide. The substrate spectrum overlaps with those of cytochrome P450s and plant peroxidases which are relevant in environmental analysis and drug monitoring. In M. rotula peroxygenase-based enzyme electrodes, the signal is generated by the reduction of electrode-active reaction products (e.g., p-benzoquinone and p-quinoneimine) with electro-enzymatic recycling of the analyte. In these enzyme electrodes, the signal reflects the conversion of all substrates thus representing an overall parameter in complex media. The performance of these sensors and their further development are discussed.}, language = {en} } @misc{YarmanDechtriratBosserdtetal.2015, author = {Yarman, Aysu and Dechtrirat, Decha and Bosserdt, Maria and Jetzschmann, Katharina J. and Gajovic-Eichelmann, Nenad and Scheller, Frieder W.}, title = {Cytochrome c-derived hybrid systems based on moleculary imprinted polymers}, series = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, volume = {27}, journal = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, number = {3}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1040-0397}, doi = {10.1002/elan.201400592}, pages = {573 -- 586}, year = {2015}, abstract = {Hybrid architectures which combine a MIP with an immobilized affinity ligand or a biocatalyst sum up the advantages of both components. In this paper, hybrid architectures combining a layer of a molecularly imprinted electropolymer with a mini-enzyme or a self-assembled monolayer will be presented. (i) Microperoxidase-11 (MP-11) catalyzed oxidation of the drug aminopyrine on a product-imprinted sublayer: The peroxide dependent conversion of the analyte aminopyrine takes place in the MP-11 containing layer on top of a product-imprinted electropolymer on the indicator electrode. The hierarchical architecture resulted in the elimination of interfering signals for ascorbic acid and uric acid. An advantage of the new hierarchical structure is the separation of MIP formation by electropolymerization and immobilization of the catalyst. In this way it was for the first time possible to integrate an enzyme with a MIP layer in a sensor configuration. This combination has the potential to be transferred to other enzymes, e.g. P450, opening the way to clinically important analytes. (ii) Epitope-imprinted poly-scopoletin layer for binding of the C-terminal peptide and cytochrome c (Cyt c): The MIP binds both the target peptide and the parent protein almost eight times stronger than the non-imprinted polymer with affinities in the lower micromolar range. Exchange of only one amino acid in the peptide decreases the binding by a factor of five. (iii) MUA-poly-scopoletin MIP for cytochrome c: Cyt c bound to the MIP covered gold electrode exhibits direct electron transfer with a redox potential and rate constant typical for the native protein. The MIP cover layer suppresses the displacement of the target protein by BSA or myoglobin. The combination of protein imprinted polymers with an efficient electron transfer is a new concept for characterizing electroactive proteins such as Cyt c. The competition with other proteins shows that the MIP binds its target Cyt c preferentially and that molecular shape and the charge of protein determine the binding of interfering proteins.}, language = {en} } @article{YarmanBadalyanGajovicEichelmannetal.2011, author = {Yarman, Aysu and Badalyan, Artavazd and Gajovic-Eichelmann, Nenad and Wollenberger, Ursula and Scheller, Frieder W.}, title = {Enzyme electrode for aromatic compounds exploiting the catalytic activities of microperoxidase-11}, series = {Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics}, volume = {30}, journal = {Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics}, number = {1}, publisher = {Elsevier}, address = {Oxford}, issn = {0956-5663}, doi = {10.1016/j.bios.2011.09.004}, pages = {320 -- 323}, year = {2011}, abstract = {Microperoxidase-11 (MR-11) which has been immobilised in a matrix of chitosan-embedded gold nanoparticles on the surface of a glassy carbon electrode catalyzes the conversion of aromatic substances. This peroxide-dependent catalysis of microperoxidase has been applied in an enzyme electrode for the first time to indicate aromatic compounds such as aniline. 4-fluoroaniline, catechol and p-aminophenol. The electrode signal is generated by the cathodic reduction of the quinone or quinoneimine which is formed in the presence of both MP-II and peroxide from the substrate. The same sensor principle will be extended to aromatic drugs.}, language = {en} } @article{XieTangWollenbergeretal.1997, author = {Xie, B. and Tang, X. and Wollenberger, Ursula and Johansson, G. and Gorton, Lo and Scheller, Frieder W. and Danielsson, B.}, title = {Hybrid biosensor for simultaneous electrochemical and thermal detection}, year = {1997}, language = {en} } @article{WuWollenbergerHofrichteretal.2011, author = {Wu, Yunhua and Wollenberger, Ursula and Hofrichter, Martin and Ullrich, Rene and Scheibner, Katrin and Scheller, Frieder W.}, title = {Direct electron transfer of Agrocybe aegerita peroxygenase at electrodes modified with chitosan-capped Au nanoparticles and its bioelectrocatalysis to aniline}, series = {Sensors and actuators : B, Chemical}, volume = {160}, journal = {Sensors and actuators : B, Chemical}, number = {1}, publisher = {Elsevier}, address = {Lausanne}, issn = {0925-4005}, doi = {10.1016/j.snb.2011.09.090}, pages = {1419 -- 1426}, year = {2011}, abstract = {Three different sizes of chitosan-capped Au nanoparticles were synthesized and were used to incorporate Agrocybe aegerita peroxygenase (AaeAPO) onto the surface of glassy carbon electrode. The direct electron transfer of AaeAPO was achieved in all films. The highest amount of electroactive enzyme and highest electron transfer rate constant k(s) of AaeAPO were obtained in the film with the smallest size of chitosan-capped Au nanoparticles. In anaerobic solutions, quasi-reversible oxidation and reduction are obtained with a formal potential of -0.280V vs. Ag/AgCl 1 M KCl in 100 mM (pH 7.0) PBS at scan rate of 1 V s(-1). Bioelectrocatalytic reduction currents can be obtained with the AaeAPO-modified electrode on addition of hydrogen peroxide. This reaction was suppressed when sodium azide, an inhibitor of AaeAPO, was present. Furthermore, the peroxide-dependent conversion of aniline was characterized and it was found that a polymer product via p-aminophenol is formed. And the AaeAPO biosensor was applied to determine aniline and p-aminophenol.}, language = {en} } @article{WollenbergerSchubertPfeifferetal.1996, author = {Wollenberger, Ursula and Schubert, Florian and Pfeiffer, Dorothea and Scheller, Frieder W.}, title = {Recycling sensors based on kinases : proceedings of Mosbach Symposion on Biochemical Technology}, year = {1996}, language = {en} } @article{WollenbergerSchubertPfeifferetal.1993, author = {Wollenberger, Ursula and Schubert, Florian and Pfeiffer, Dorothea and Scheller, Frieder W.}, title = {Enhancing biosensor performance using multienzyme systems}, year = {1993}, language = {en} } @article{WollenbergerScheller1993, author = {Wollenberger, Ursula and Scheller, Frieder W.}, title = {Enzyme activation for activator and enzyme activity measurement}, year = {1993}, language = {en} } @article{WollenbergerNeumannScheller1998, author = {Wollenberger, Ursula and Neumann, B. and Scheller, Frieder W.}, title = {Development of a biomimetic alkane sensor f}, year = {1998}, language = {en} } @article{WollenbergerNeumannScheller1993, author = {Wollenberger, Ursula and Neumann, B. and Scheller, Frieder W.}, title = {Enzyme and microbial sensors for environmental Monitoring}, year = {1993}, language = {en} } @article{WollenbergerNeumannRiedeletal.1994, author = {Wollenberger, Ursula and Neumann, B. and Riedel, K. and Scheller, Frieder W.}, title = {Enzyme and microbial sensors for phosphate, phenols, pesticides and peroxides}, year = {1994}, language = {en} } @article{WollenbergerLisdatScheller1997, author = {Wollenberger, Ursula and Lisdat, Fred and Scheller, Frieder W.}, title = {Enzymatic substrade recycling electrodes}, year = {1997}, language = {en} } @article{WollenbergerHintscheScheller1995, author = {Wollenberger, Ursula and Hintsche, R. and Scheller, Frieder W.}, title = {Biosensors for analytical microsystems}, year = {1995}, language = {en} } @article{WollenbergerDrungilieneStoeckleinetal.1996, author = {Wollenberger, Ursula and Drungiliene, A. and St{\"o}cklein, Walter F. M. and Kulys, J. and Scheller, Frieder W.}, title = {Direct electrocatalytic determination of dissolved peroxidases}, year = {1996}, language = {en} } @article{WelzelKossmehlEngelmannetal.1996, author = {Welzel, H.-P. and Kossmehl, G. and Engelmann, G. and Neumann, B. and Wollenberger, Ursula and Scheller, Frieder W. and Schr{\"o}der, W.}, title = {Reactive groups on polymer covered electrodes, 4. Lactate-oxidase-biosensor based on electrodes modifies by polyphiophene}, year = {1996}, language = {en} } @article{WelzelKossmehlEngelmannetal.1997, author = {Welzel, H.-P. and Kossmehl, G. and Engelmann, G. and Neumann, B. and Wollenberger, Ursula and Scheller, Frieder W.}, title = {Electrochemical polymerization of functionalized thiohene derivatives for immobilization of proteins}, year = {1997}, language = {en} } @article{WarsinkeStancikMacholanetal.1998, author = {Warsinke, Axel and Stancik, L. and Machol{\´a}n, L. and Pfeiffer, Dorothea and Scheller, Frieder W.}, title = {Biosensors for food analysis : application of biosensors to food requirements}, isbn = {0-85404-750-6}, year = {1998}, language = {en} } @article{WarsinkeBenkertScheller1996, author = {Warsinke, Axel and Benkert, Alexander and Scheller, Frieder W.}, title = {Biomolecular modules for creatinine determination}, year = {1996}, language = {en} } @article{WarsinkeBenkertScheller2000, author = {Warsinke, Axel and Benkert, Alexander and Scheller, Frieder W.}, title = {Electrochemical immunoassays}, year = {2000}, language = {en} } @article{VijgenboomVijgenboomTeppneretal.2001, author = {Vijgenboom, E. and Vijgenboom, E. and Teppner, A. W. J. W. and Makower, Alexander and Scheller, Frieder W. and Canters, Gerard W. and Wollenberger, Ursula}, title = {Determination of phenolic compounds using recombinant tyrosinanse from Streptomyces antibioticus}, year = {2001}, language = {en} } @article{TellerHalamekMakoweretal.2006, author = {Teller, C. and Halamek, Jan and Makower, Alexander and Fournier, Didier and Schulze, H. and Scheller, Frieder W.}, title = {A piezoelectric sensor with propidium as a recognition element for cholinesterases}, doi = {10.1016/j.snb.2005.02.053}, year = {2006}, abstract = {A piezoelectric biosensor has been developed on the basis of the reversible acetylcholinesterase (AChE) inhibitor propidium. The propidium cation was bound to a 11-mercaptoundecanoic acid monolayer on gold-coated quartz crystals. The immobilization was done via activation of carboxyl groups by 1,3-dicyclohexylcarbodiimide (DCC). Different types of cholinesterases (acetyl- and butyryl-ChE) from different origins were tested for their binding ability towards the immobilized propidium. Binding Studies were performed in a flow system, Furthermore, catalytically active and organophosphate-inhibited enzyme were compared re-aiding their binding capability. The binding constants were derived by using an one to one binding model and a refined model also including rebinding effects. It was shown that organophosphorylation of the active site hardly influences the affinity of AChE towards propidium. Furthermore the propidium-based biosensor provides equal sensitivity as compared with piezolelectric sensors with immobilized paraoxon- an active site ligand of AChE. (c) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{TanneJeoungPengetal.2015, author = {Tanne, Johannes and Jeoung, Jae-Hun and Peng, Lei and Yarman, Aysu and Dietzel, Birgit and Schulz, Burkhard and Schad, Daniel and Dobbek, Holger and Wollenberger, Ursula and Bier, Frank Fabian and Scheller, Frieder W.}, title = {Direct Electron Transfer and Bioelectrocatalysis by a Hexameric, Heme Protein at Nanostructured Electrodes}, series = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, volume = {27}, journal = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, number = {10}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1040-0397}, doi = {10.1002/elan.201500231}, pages = {2262 -- 2267}, year = {2015}, abstract = {A nanohybrid consisting of poly(3-aminobenzenesulfonic acid-co-aniline) and multiwalled carbon nanotubes [MWCNT-P(ABS-A)]) on a gold electrode was used to immobilize the hexameric tyrosine-coordinated heme protein (HTHP). The enzyme showed direct electron transfer between the heme group of the protein and the nanostructured surface. Desorption of the noncovalently bound heme from the protein could be excluded by control measurements with adsorbed hemin on aminohexanthiol-modified electrodes. The nanostructuring and the optimised charge characteristics resulted in a higher protein coverage as compared with MUA/MU modified electrodes. The adsorbed enzyme shows catalytic activity for the cathodic H2O2 reduction and oxidation of NADH.}, language = {en} } @article{TadjoungWaffoYesildagCasertaetal.2018, author = {Tadjoung Waffo, Armel Franklin and Yesildag, Cigdem and Caserta, Giorgio and Katz, Sagie and Zebger, Ingo and Lensen, Marga C. and Wollenberger, Ulla and Scheller, Frieder W. and Altintas, Zeynep}, title = {Fully electrochemical MIP sensor for artemisinin}, series = {Sensors and actuators : B, Chemical}, volume = {275}, journal = {Sensors and actuators : B, Chemical}, publisher = {Elsevier}, address = {Lausanne}, issn = {0925-4005}, doi = {10.1016/j.snb.2018.08.018}, pages = {163 -- 173}, year = {2018}, abstract = {This study aims to develop a rapid, sensitive and cost-effective biomimetic electrochemical sensor for artemisinin determination in plant extracts and for pharmacokinetic studies. A novel molecularly imprinted polymer (MIP)based electrochemical sensor was developed by electropolymerization of o-phenylenediamine (o-PD) in the presence of artemisinin on gold wire surface for sensitive detection of artemisinin. The experimental parameters, including selection of functional monomer, polymerization conditions, template extraction after polymerization, influence of pH and buffer were all optimized. Every step of imprinted film synthesis were evaluated by employing voltammetry techniques, surface-enhanced infrared absorption spectroscopy (SEIRAS) and atomic force microscopy (AFM). The specificity was further evaluated by investigating non-specific artemisinin binding on non-imprinted polymer (NIP) surfaces and an imprinting factor of 6.8 was achieved. The artemisinin imprinted polymers using o-PD as functional monomer have provided highly stable and effective binding cavities for artemisinin. Cross-reactivity studies with drug molecules showed that the MIPs are highly specific for artemisinin. The influence of matrix effect was further investigated both in artificial plant matrix and diluted human serum. The results revealed a high affinity of artemisinin-MIP with dissociation constant of 7.3 x 10(-9) M and with a detection limit of 0.01 mu M and 0.02 mu M in buffer and plant matrix, respectively.}, language = {en} } @article{SzeponikMoellerPfeifferetal.1997, author = {Szeponik, Jan and M{\"o}ller, B. and Pfeiffer, Dorothea and Lisdat, Fred and Wollenberger, Ursula and Makower, Alexander and Scheller, Frieder W.}, title = {Ultrasensitive bienzyme sensor for adrenaline}, year = {1997}, language = {en} } @article{StoellnerStoeckleinSchelleretal.2002, author = {St{\"o}llner, Daniela and St{\"o}cklein, Walter F. M. and Scheller, Frieder W. and Warsinke, Axel}, title = {Membrane-immobilized haptoglobin as affinity matrix for a hemoglobin-A1c-immunosensor}, year = {2002}, language = {en} } @article{StoeckleinWarsinkeScheller1997, author = {St{\"o}cklein, Walter F. M. and Warsinke, Axel and Scheller, Frieder W.}, title = {Organic solvent modified enzyme-liked immunoassay for the detection of triazine herbicides}, year = {1997}, language = {en} } @article{StoeckleinWarsinkeMicheeletal.1998, author = {St{\"o}cklein, Walter F. M. and Warsinke, Axel and Micheel, Burkhard and Kempter, Gerhard and H{\"o}hne, Wolfgang and Scheller, Frieder W.}, title = {Diphenylurea hapten sensing with a monoclonal antibody and its Fab fragment : kinetic and thermodynamic investigations}, year = {1998}, language = {en} } @article{StoeckleinWarsinkeMicheeletal.1998, author = {St{\"o}cklein, Walter F. M. and Warsinke, Axel and Micheel, Burkhard and H{\"o}hne, Wolfgang and Woller, Jochen and Kempter, Gerhard and Scheller, Frieder W.}, title = {Characterization of a monoclonal antibody and its Fab fragment against diphenylurea hapten with BIA}, isbn = {3-8154-3540-4}, year = {1998}, language = {en} } @article{StoeckleinWarsinkeMicheeletal.1997, author = {St{\"o}cklein, Walter F. M. and Warsinke, Axel and Micheel, Burkhard and H{\"o}hne, Wolfgang and Woller, Jochen and Kempter, Gerhard and Scheller, Frieder W.}, title = {Detection of diphenylurea derivatives with biospecific interaction analysis (BIA) : Kinetic investigations}, year = {1997}, language = {en} } @article{StoeckleinSchellerAbuknesha1995, author = {St{\"o}cklein, Walter F. M. and Scheller, Frieder W. and Abuknesha, Rhamadan}, title = {Effects of organic solvents on semicontinuous immunochemical detection of coumarin derivatives}, year = {1995}, language = {en} } @article{StoeckleinScheller1997, author = {St{\"o}cklein, Walter F. M. and Scheller, Frieder W.}, title = {Enzymes and antibodies in organic media : analytical applications}, year = {1997}, language = {en} } @article{StoeckleinScheller1996, author = {St{\"o}cklein, Walter F. M. and Scheller, Frieder W.}, title = {Laccase : a marker enzyme for solvent modified immunoassays}, year = {1996}, language = {en} } @article{StoeckleinRohdeScharteetal.2000, author = {St{\"o}cklein, Walter F. M. and Rohde, M. and Scharte, Gudrun and Behrsing, Olaf and Warsinke, Axel and Micheel, Burkhard and Scheller, Frieder W.}, title = {Sensitive detection of triazine and phenylurea pesticides in pure organic solvent by enzyme linked immunsorbent assay (ELISA): stabilities, solubilities and sensitives}, year = {2000}, language = {en} } @article{StoeckleinMakowerBieretal.1997, author = {St{\"o}cklein, Walter F. M. and Makower, Alexander and Bier, Frank Fabian and Scheller, Frieder W.}, title = {Enzyme sensors and enzyme amplifification systems}, year = {1997}, language = {en} } @article{StoeckleinBehrsingScharteetal.2000, author = {St{\"o}cklein, Walter F. M. and Behrsing, Olaf and Scharte, Gudrun and Micheel, Burkhard and Benkert, Alexander and Sch{\"o}ssler, W. and Warsinke, Axel and Scheller, Frieder W.}, title = {Enzyme kinetic assays with surface plasmon resonance (BIAcore) based on competition between enzyme and creatinine antibody}, year = {2000}, language = {en} } @article{StrefferKaatzBaueretal.1998, author = {Streffer, Katrin and Kaatz, Helvi and Bauer, Christian G. and Makower, Alexander and Schulmeister, Thomas and Scheller, Frieder W. and Peter, Martin G. and Wollenberger, Ursula}, title = {Application of a sensitive catechol detector for determination of tyrosinase inhibitors}, year = {1998}, language = {en} } @article{StojanovicErdossyKeltaietal.2017, author = {Stojanovic, Zorica and Erdossy, Julia and Keltai, Katalin and Scheller, Frieder W. and Gyurcsanyi, Robert E.}, title = {Electrosynthesized molecularly imprinted polyscopoletin nanofilms for human serum albumin detection}, series = {Analytica chimica acta : an international journal devoted to all branches of analytical chemistry}, volume = {977}, journal = {Analytica chimica acta : an international journal devoted to all branches of analytical chemistry}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0003-2670}, doi = {10.1016/j.aca.2017.04.043}, pages = {1 -- 9}, year = {2017}, abstract = {Molecularly imprinted polymers (MIPs) rendered selective solely by the imprinting with protein templates lacking of distinctive properties to facilitate strong target-MIP interaction are likely to exhibit medium to low template binding affinities. While this prohibits the use of such MIPs for applications requiring the assessment of very low template concentrations, their implementation for the quantification of high-abundance proteins seems to have a clear niche in the analytical practice. We investigated this opportunity by developing a polyscopoletin-based MIP nanofilm for the electrochemical determination of elevated human serum albumin (HSA) in urine. As reference for a low abundance protein ferritin-MIPs were also prepared by the same procedure. Under optimal conditions, the imprinted sensors gave a linear response to HSA in the concentration range of 20-100 mg/dm(3), and to ferritin in the range of 120-360 mg/dm(3). While as expected the obtained limit of detection was not sufficient to determine endogenous ferritin in plasma, the HSA-sensor was successfully employed to analyse urine samples of patients with albuminuria. The results suggest that MIP-based sensors may be applicable for quantifying high abundance proteins in a clinical setting. (c) 2017 Elsevier B.V. All rights reserved.}, language = {en} } @article{StoellnerSchellerWarsinke2002, author = {Stoellner, Daniela and Scheller, Frieder W. and Warsinke, Axel}, title = {Activation of cellulose membranes with 1,1{\"i}-carbonyldiimidazole or 1-cyano-4-4-dimethylaminopyridinium tetrafluoroborate as a basis for the development of immunosensors}, year = {2002}, language = {en} } @article{StancikMacholanPluhaceketal.1995, author = {Stanc{\´i}k, L. and Machol{\´a}n, L. and Pluhacek, I. and Scheller, Frieder W.}, title = {Biosensing of rapeseed glucosinolates using amperometric enzyme electrodes based on membrane-bound glucose oxidase or tyrosinase}, year = {1995}, language = {en} } @article{StancikMacholanScheller1995, author = {Stancik, L. and Machol{\´a}n, L. and Scheller, Frieder W.}, title = {Biosensing of tyrosinase inhibitors in nonaqueous solvents}, year = {1995}, language = {en} } @article{SpricigoRichterLeimkuehleretal.2010, author = {Spricigo, Roberto and Richter, Claudia and Leimk{\"u}hler, Silke and Gorton, Lo and Scheller, Frieder W. and Wollenberger, Ursula}, title = {Sulfite biosensor based on osmium redox polymer wired sulfite oxidase}, issn = {0927-7757}, doi = {10.1016/j.colsurfa.2009.09.001}, year = {2010}, abstract = {A biosensor, based on a redoxactive osmium polymer and sulfite oxidase on screen-printed electrodes, is presented here as a promising method for the detection of sulfite. A catalytic oxidative current was generated when a sample containing sulfite was pumped over the carbon screen-printed electrode modified with osmium redox polymer wired sulfite oxidase. A stationary value was reached after approximately 50 s and a complete measurement lasted no more than 3 min. The electrode polarized at -0.1 V (vs. Ag vertical bar AgCl 1M KCl) permits minimizing the influence of interfering substances, since these compounds can be unspecific oxidized at higher potentials. Because of the good stability of the protein film on the electrode surface, a well functioning biosensor-flow system was possible to construct. The working stability and reproducibility were further enhanced by the addition of bovine serum albumin generating a more long-term stable and biocompatible protein environment. The optimized biosensor showed a stable signal for more than a week of operation and a coefficient of variation of 4.8\% for 12 successive measurements. The lower limit of detection of the sensor was 0.5 mu M sulfite and the response was linear until 100 mu M. The high sensitivity permitted a 1:500 dilution of wine samples. The immobilization procedure and the operational conditions granted minimized interferences. Additionally, repeating the immobilization procedure to form several layers of wired SO further increased the sensitivity of such a sensor. Finally. the applicability of the developed sulfite biosensor was tested on real samples, such as white and red wines.}, language = {en} } @article{SpricigoLeimkuehlerGortonetal.2015, author = {Spricigo, Roberto and Leimk{\"u}hler, Silke and Gorton, Lo and Scheller, Frieder W. and Wollenberger, Ursula}, title = {The Electrically Wired Molybdenum Domain of Human Sulfite Oxidase is Bioelectrocatalytically Active}, series = {European journal of inorganic chemistry : a journal of ChemPubSoc Europe}, journal = {European journal of inorganic chemistry : a journal of ChemPubSoc Europe}, number = {21}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1434-1948}, doi = {10.1002/ejic.201500034}, pages = {3526 -- 3531}, year = {2015}, abstract = {We report electron transfer between the catalytic molybdenum cofactor (Moco) domain of human sulfite oxidase (hSO) and electrodes through a poly(vinylpyridine)-bound [osmium(N,N'-methyl-2,2'-biimidazole)(3)](2+/3+) complex as the electron-transfer mediator. The biocatalyst was immobilized in this low-potential redox polymer on a carbon electrode. Upon the addition of sulfite to the immobilized separate Moco domain, the generation of a significant catalytic current demonstrated that the catalytic center is effectively wired and active. The bioelectrocatalytic current of the wired separate catalytic domain reached 25\% of the signal of the wired full molybdoheme enzyme hSO, in which the heme b(5) is involved in the electron-transfer pathway. This is the first report on a catalytically active wired molybdenum cofactor domain. The formal potential of this electrochemical mediator is between the potentials of the two cofactors of hSO, and as hSO can occupy several conformations in the polymer matrix, it is imaginable that electron transfer from the catalytic site to the electrode through the osmium center occurs for the hSO molecules in which the Moco domain is sufficiently accessible. The observation of catalytic oxidation currents at low potentials is favorable for applications in bioelectronic devices.}, language = {en} } @article{SpricigoDronovLisdatetal.2009, author = {Spricigo, Roberto and Dronov, Roman and Lisdat, Fred and Leimk{\"u}hler, Silke and Scheller, Frieder W. and Wollenberger, Ursula}, title = {Electrocatalytic sulfite biosensor with human sulfite oxidase co-immobilized with cytochrome c in a polyelectrolyte-containing multilayer}, issn = {1618-2642}, doi = {10.1007/s00216-008-2432-y}, year = {2009}, abstract = {An efficient electrocatalytic biosensor for sulfite detection was developed by co-immobilizing sulfite oxidase and cytochrome c with polyaniline sulfonic acid in a layer-by-layer assembly. QCM, UV-Vis spectroscopy and cyclic voltammetry revealed increasing loading of electrochemically active protein with the formation of multilayers. The sensor operates reagentless at low working potential. A catalytic oxidation current was detected in the presence of sulfite at the modified gold electrode, polarized at +0.1 V ( vs. Ag/AgCl 1 M KCl). The stability of the biosensor performance was characterized and optimized. A 17-bilayer electrode has a linear range between 1 and 60 mu M sulfite with a sensitivity of 2.19 mA M-1 sulfite and a response time of 2 min. The electrode retained a stable response for 3 days with a serial reproducibility of 3.8\% and lost 20\% of sensitivity after 5 days of operation. It is possible to store the sensor in a dry state for more than 2 months. The multilayer electrode was used for determination of sulfite in unspiked and spiked samples of red and white wine. The recovery and the specificity of the signals were evaluated for each sample.}, language = {en} } @article{SongBierScheller1995, author = {Song, Min Ik and Bier, Frank Fabian and Scheller, Frieder W.}, title = {A method to detect superoxide radicals using teflon membrane and superoxide dismutase}, year = {1995}, language = {en} } @article{SigolaevaMarkowerEremenkoetal.2001, author = {Sigolaeva, L. V. and Markower, Alexander and Eremenko, A. V. and Makhaeva, G. F. and Malygin, V. V. and Kurochkin, I. N. and Scheller, Frieder W.}, title = {Bioelectrochemical anaysis of neuropathy targes esterase activity in blood}, year = {2001}, language = {en} } @article{ShumyantsevaIvanovBistolasetal.2004, author = {Shumyantseva, V. V. and Ivanov, Y. D. and Bistolas, Nikitas and Scheller, Frieder W. and Archakov, Alexander I. and Wollenberger, Ursula}, title = {Direct electron transfer of cytochrome P450 2B4 at electrodes modified with non-ionic detergent and colloidal clay nanoparticles}, year = {2004}, abstract = {A method for construction of biosensors with membranous cytochrome P450 isoenzymes was developed based on clay/ detergent/protein mixed films. Thin films of sodium montmorillonite colloid with incorporated cytochrome P450 2134 (CYP2B4) with nonionic detergent were prepared on glassy carbon electrodes. The modified electrodes were electrochemically characterized, and bio-electrocatalytic reactions were followed. CYP2B4 can be reduced fast on clay- modified glassy carbon electrodes in the presence of the nonionic detergent Tween 80. In anaerobic solutions, reversible oxidation and reduction is obtained with a formal potential between -0.292 and - 0.305 V vs Ag/AgCl 1 M KCl depending on the preparation of the biosensor. In air-saturated solution, bio-electrocatalytic reduction currents can be obtained with the CYP2B4-modified electrode on addition of typical substrates such as aminopyrine and benzphetamine. This reaction was suppressed when methyrapone, an inhibitor of P450 reactions, was present. Measurement of product formation also indicates the bioelectrocatialysis by CYP2B4}, language = {en} } @article{SchulmeisterScheller1996, author = {Schulmeister, Thomas and Scheller, Frieder W.}, title = {The mathematics of exponential signal amplification in amperometric three enzyme electrodes}, year = {1996}, language = {en} } @article{SchulmeisterRoseScheller1997, author = {Schulmeister, Thomas and Rose, J{\"u}rgen and Scheller, Frieder W.}, title = {Mathematical modelling of exponential amplification in membrane-based enzyme sensors}, year = {1997}, language = {en} }