@misc{WessigJohnSperlichetal.2020, author = {Wessig, Pablo and John, Leonard and Sperlich, Eric and Kelling, Alexandra}, title = {Sulfur tuning of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {3}, issn = {1866-8372}, doi = {10.25932/publishup-56624}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-566241}, pages = {15}, year = {2020}, abstract = {The replacement of oxygen by sulfur atoms of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes is an efficient way to adjust the photophysical properties (sulfur tuning). While previously developed S-4-DBD dyes exhibit considerably red-shifted absorption and emission wavelength, the heavy atom effect of four sulfur atoms cause low fluorescence quantum yields and short fluorescence lifetimes. Herein, we demonstrate that the replacement of less than four sulfur atoms (S-1-DBD, 1,2-S-2-DBD, and 1,4-S-2-DBD dyes) permits a fine-tuning of the photophysical properties. In some cases, a similar influence on the wavelength without the detrimental effect on the quantum yields and lifetimes is observed. Furthermore, the synthetic accessibility of S-1- and S-2-DBD dyes is improved, compared with S-4-DBD dyes. For coupling with biomolecules a series of reactive derivatives of the new dyes were developed (azides, OSu esters, alkynes, maleimides).}, language = {en} } @phdthesis{Eren2024, author = {Eren, Enis Oğuzhan}, title = {Covalent anode materials for high-energy sodium-ion batteries}, doi = {10.25932/publishup-62258}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-622585}, school = {Universit{\"a}t Potsdam}, pages = {xi, 153}, year = {2024}, abstract = {The reliance on fossil fuels has resulted in an abnormal increase in the concentration of greenhouse gases, contributing to the global climate crisis. In response, a rapid transition to renewable energy sources has begun, particularly lithium-ion batteries, playing a crucial role in the green energy transformation. However, concerns regarding the availability and geopolitical implications of lithium have prompted the exploration of alternative rechargeable battery systems, such as sodium-ion batteries. Sodium is significantly abundant and more homogeneously distributed in the crust and seawater, making it easier and less expensive to extract than lithium. However, because of the mysterious nature of its components, sodium-ion batteries are not yet sufficiently advanced to take the place of lithium-ion batteries. Specifically, sodium exhibits a more metallic character and a larger ionic radius, resulting in a different ion storage mechanism utilized in lithium-ion batteries. Innovations in synthetic methods, post-treatments, and interface engineering clearly demonstrate the significance of developing high-performance carbonaceous anode materials for sodium-ion batteries. The objective of this dissertation is to present a systematic approach for fabricating efficient, high-performance, and sustainable carbonaceous anode materials for sodium-ion batteries. This will involve a comprehensive investigation of different chemical environments and post-modification techniques as well. This dissertation focuses on three main objectives. Firstly, it explores the significance of post-synthetic methods in designing interfaces. A conformal carbon nitride coating is deposited through chemical vapor deposition on a carbon electrode as an artificial solid-electrolyte interface layer, resulting in improved electrochemical performance. The interaction between the carbon nitride artificial interface and the carbon electrode enhances initial Coulombic efficiency, rate performance, and total capacity. Secondly, a novel process for preparing sulfur-rich carbon as a high-performing anode material for sodium-ion batteries is presented. The method involves using an oligo-3,4-ethylenedioxythiophene precursor for high sulfur content hard carbon anode to investigate the sulfur heteroatom effect on the electrochemical sodium storage mechanism. By optimizing the condensation temperature, a significant transformation in the materials' nanostructure is achieved, leading to improved electrochemical performance. The use of in-operando small-angle X-ray scattering provides valuable insights into the interaction between micropores and sodium ions during the electrochemical processes. Lastly, the development of high-capacity hard carbon, derived from 5-hydroxymethyl furfural, is examined. This carbon material exhibits exceptional performance at both low and high current densities. Extensive electrochemical and physicochemical characterizations shed light on the sodium storage mechanism concerning the chemical environment, establishing the material's stability and potential applications in sodium-ion batteries.}, language = {en} } @article{YanOschatzWu2020, author = {Yan, Runyu and Oschatz, Martin and Wu, Feixiang}, title = {Towards stable lithium-sulfur battery cathodes by combining physical and chemical confinement of polysulfides in core-shell structured nitrogen-doped carbons}, series = {Carbon}, volume = {161}, journal = {Carbon}, publisher = {Elsevier Science}, address = {Amsterdam [u.a.]}, issn = {0008-6223}, doi = {10.1016/j.carbon.2020.01.046}, pages = {162 -- 168}, year = {2020}, abstract = {Despite intensive research on porous carbon materials as hosts for sulfur in lithium-sulfur battery cathodes, it remains a problem to restrain the soluble lithium polysulfide intermediates for a long-term cycling stability without the use of metallic or metal-containing species. Here, we report the synthesis of nitrogen-doped carbon materials with hierarchical pore architecture and a core-shell-type particle design including an ordered mesoporous carbon core and a polar microporous carbon shell. The initial discharge capacity with a sulfur loading up to 72 wt\% reaches over 900 mA h g(sulf)(ur)(-1) at a rate of C/2. Cycling performance measured at C/2 indicates similar to 90\% capacity retention over 250 cycles. In comparison to other carbon hosts, this architecture not only provides sufficient space for a high sulfur loading induced by the high-pore-volume particle core, but also enables a dual effect of physical and chemical confinement of the polysulfides to stabilize the cycle life by adsorbing the soluble intermediates in the polar microporous shell. This work elucidates a design principle for carbonaceous hosts that is capable to provide simultaneous physical-chemical confinement. This is necessary to overcome the shuttle effect towards stable lithium-sulfur battery cathodes, in the absence of additional membranes or inactive metal-based anchoring materials.}, language = {en} } @article{MendelHercherZupoketal.2020, author = {Mendel, Ralf R. and Hercher, Thomas W. and Zupok, Arkadiusz and Hasnat, Muhammad Abrar and Leimk{\"u}hler, Silke}, title = {The requirement of inorganic Fe-S clusters for the biosynthesis of the organometallic molybdenum cofactor}, series = {Inorganics : open access journal}, volume = {8}, journal = {Inorganics : open access journal}, number = {7}, publisher = {MDPI}, address = {Basel}, issn = {2304-6740}, doi = {10.3390/inorganics8070043}, pages = {23}, year = {2020}, abstract = {Iron-sulfur (Fe-S) clusters are essential protein cofactors. In enzymes, they are present either in the rhombic [2Fe-2S] or the cubic [4Fe-4S] form, where they are involved in catalysis and electron transfer and in the biosynthesis of metal-containing prosthetic groups like the molybdenum cofactor (Moco). Here, we give an overview of the assembly of Fe-S clusters in bacteria and humans and present their connection to the Moco biosynthesis pathway. In all organisms, Fe-S cluster assembly starts with the abstraction of sulfur froml-cysteine and its transfer to a scaffold protein. After formation, Fe-S clusters are transferred to carrier proteins that insert them into recipient apo-proteins. In eukaryotes like humans and plants, Fe-S cluster assembly takes place both in mitochondria and in the cytosol. Both Moco biosynthesis and Fe-S cluster assembly are highly conserved among all kingdoms of life. Moco is a tricyclic pterin compound with molybdenum coordinated through its unique dithiolene group. Moco biosynthesis begins in the mitochondria in a Fe-S cluster dependent step involving radical/S-adenosylmethionine (SAM) chemistry. An intermediate is transferred to the cytosol where the dithiolene group is formed, to which molybdenum is finally added. Further connections between Fe-S cluster assembly and Moco biosynthesis are discussed in detail.}, language = {en} } @article{WessigFreyseSchusteretal.2020, author = {Wessig, Pablo and Freyse, Daniel and Schuster, David and Kelling, Alexandra}, title = {Fluorescent dyes with large stokes shifts based on Benzo[1,2-d:4,5-d']bis([1,3]dithiole) ("S4-DBD Dyes")}, series = {Europan journal of organic chemistry}, volume = {2020}, journal = {Europan journal of organic chemistry}, number = {11}, publisher = {Wiley}, address = {Weinheim}, issn = {1434-193X}, doi = {10.1002/ejoc.202000093}, pages = {1732 -- 1744}, year = {2020}, abstract = {We report on a further development of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes by replacement of the four oxygen atoms of the heterocyclic core by sulfur atoms. This variation causes striking changes of the photophysical properties. Whereas absorption and emission significantly shifted to longer wavelength, the fluorescence lifetimes and quantum yields are diminished compared to DBD dyes. The latter effect is presumably caused by an enhanced intersystem crossing to the triplet state due to the sulfur atoms. The very large Stokes shifts of the S-4-DBD dyes ranging from 3000 cm(-1) to 7400 cm(-1) (67 nm to 191 nm) should be especially emphasized. By analogy with DBD dyes a broad variation of absorption and emission wavelength is possible by introducing different electron withdrawing substituents. Moreover, some derivatives for coupling with biomolecules were developed.}, language = {en} } @article{WessigJohnSperlichetal.2020, author = {Wessig, Pablo and John, Leonard and Sperlich, Eric and Kelling, Alexandra}, title = {Sulfur tuning of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes}, series = {European journal of organic chemistry}, volume = {2021}, journal = {European journal of organic chemistry}, number = {3}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1434-193X}, doi = {10.1002/ejoc.202001418}, pages = {499 -- 511}, year = {2020}, abstract = {The replacement of oxygen by sulfur atoms of [1,3]-dioxolo[4.5-f]benzodioxole (DBD) fluorescent dyes is an efficient way to adjust the photophysical properties (sulfur tuning). While previously developed S-4-DBD dyes exhibit considerably red-shifted absorption and emission wavelength, the heavy atom effect of four sulfur atoms cause low fluorescence quantum yields and short fluorescence lifetimes. Herein, we demonstrate that the replacement of less than four sulfur atoms (S-1-DBD, 1,2-S-2-DBD, and 1,4-S-2-DBD dyes) permits a fine-tuning of the photophysical properties. In some cases, a similar influence on the wavelength without the detrimental effect on the quantum yields and lifetimes is observed. Furthermore, the synthetic accessibility of S-1- and S-2-DBD dyes is improved, compared with S-4-DBD dyes. For coupling with biomolecules a series of reactive derivatives of the new dyes were developed (azides, OSu esters, alkynes, maleimides).}, language = {en} } @article{LeverMayerMetjeetal.2021, author = {Lever, Fabiano and Mayer, Dennis and Metje, Jan and Alisauskas, Skirmantas and Calegari, Francesca and D{\"u}sterer, Stefan and Feifel, Raimund and Niebuhr, Mario and Manschwetus, Bastian and Kuhlmann, Marion and Mazza, Tommaso and Robinson, Matthew Scott and Squibb, Richard J. and Trabattoni, Andrea and Wallner, M{\aa}ns and Wolf, Thomas J. A. and G{\"u}hr, Markus}, title = {Core-level spectroscopy of 2-thiouracil at the sulfur L1 and L2,3 edges utilizing a SASE free-electron-laser}, series = {Molecules}, volume = {26}, journal = {Molecules}, number = {21}, publisher = {MDPI}, address = {Basel}, issn = {1420-3049}, pages = {11}, year = {2021}, abstract = {In this paper, we report X-ray absorption and core-level electron spectra of the nucleobase derivative 2-thiouracil at the sulfur L1- and L2,3-edges. We used soft X-rays from the free-electron laser FLASH2 for the excitation of isolated molecules and dispersed the outgoing electrons with a magnetic bottle spectrometer. We identified photoelectrons from the 2p core orbital, accompanied by an electron correlation satellite, as well as resonant and non-resonant Coster-Kronig and Auger-Meitner emission at the L1- and L2,3-edges, respectively. We used the electron yield to construct X-ray absorption spectra at the two edges. The experimental data obtained are put in the context of the literature currently available on sulfur core-level and 2-thiouracil spectroscopy.}, language = {en} } @misc{LeverMayerMetjeetal.2021, author = {Lever, Fabiano and Mayer, Dennis and Metje, Jan and Alisauskas, Skirmantas and Calegari, Francesca and D{\"u}sterer, Stefan and Feifel, Raimund and Niebuhr, Mario and Manschwetus, Bastian and Kuhlmann, Marion and Mazza, Tommaso and Robinson, Matthew Scott and Squibb, Richard J. and Trabattoni, Andrea and Wallner, M{\aa}ns and Wolf, Thomas J. A. and G{\"u}hr, Markus}, title = {Core-level spectroscopy of 2-thiouracil at the sulfur L1 and L2,3 edges utilizing a SASE free-electron-laser}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {21}, issn = {1866-8372}, doi = {10.25932/publishup-52409}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-524091}, pages = {13}, year = {2021}, abstract = {In this paper, we report X-ray absorption and core-level electron spectra of the nucleobase derivative 2-thiouracil at the sulfur L1- and L2,3-edges. We used soft X-rays from the free-electron laser FLASH2 for the excitation of isolated molecules and dispersed the outgoing electrons with a magnetic bottle spectrometer. We identified photoelectrons from the 2p core orbital, accompanied by an electron correlation satellite, as well as resonant and non-resonant Coster-Kronig and Auger-Meitner emission at the L1- and L2,3-edges, respectively. We used the electron yield to construct X-ray absorption spectra at the two edges. The experimental data obtained are put in the context of the literature currently available on sulfur core-level and 2-thiouracil spectroscopy.}, language = {en} } @article{WangMosconiWolffetal.2019, author = {Wang, Qiong and Mosconi, Edoardo and Wolff, Christian Michael and Li, Junming and Neher, Dieter and De Angelis, Filippo and Suranna, Gian Paolo and Grisorio, Roberto and Abate, Antonio}, title = {Rationalizing the molecular design of hole-selective contacts to improve charge extraction in Perovskite solar cells}, series = {dvanced energy materials}, volume = {9}, journal = {dvanced energy materials}, number = {28}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1614-6832}, doi = {10.1002/aenm.201900990}, pages = {9}, year = {2019}, abstract = {Two new hole selective materials (HSMs) based on dangling methylsulfanyl groups connected to the C-9 position of the fluorene core are synthesized and applied in perovskite solar cells. Being structurally similar to a half of Spiro-OMeTAD molecule, these HSMs (referred as FS and DFS) share similar redox potentials but are endowed with slightly higher hole mobility, due to the planarity and large extension of their structure. Competitive power conversion efficiency (up to 18.6\%) is achieved by using the new HSMs in suitable perovskite solar cells. Time-resolved photoluminescence decay measurements and electrochemical impedance spectroscopy show more efficient charge extraction at the HSM/perovskite interface with respect to Spiro-OMeTAD, which is reflected in higher photocurrents exhibited by DFS/FS-integrated perovskite solar cells. Density functional theory simulations reveal that the interactions of methylammonium with methylsulfanyl groups in DFS/FS strengthen their electrostatic attraction with the perovskite surface, providing an additional path for hole extraction compared to the sole presence of methoxy groups in Spiro-OMeTAD. Importantly, the low-cost synthesis of FS makes it significantly attractive for the future commercialization of perovskite solar cells.}, language = {en} } @phdthesis{Boelling2006, author = {B{\"o}lling, Christian}, title = {Comprehensive metabolite analysis in Chlamydomonas reinhardtii : method development and application to the study of environmental and genetic perturbations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-11329}, school = {Universit{\"a}t Potsdam}, year = {2006}, abstract = {This study introduces a method for multiparallel analysis of small organic compounds in the unicellular green alga Chlamydomonas reinhardtii, one of the premier model organisms in cell biology. The comprehensive study of the changes of metabolite composition, or metabolomics, in response to environmental, genetic or developmental signals is an important complement of other functional genomic techniques in the effort to develop an understanding of how genes, proteins and metabolites are all integrated into a seamless and dynamic network to sustain cellular functions. The sample preparation protocol was optimized to quickly inactivate enzymatic activity, achieve maximum extraction capacity and process large sample quantities. As a result of the rapid sampling, extraction and analysis by gas chromatography coupled to time-of-flight mass spectrometry (GC-TOF) more than 800 analytes from a single sample can be measured, of which over a 100 could be positively identified. As part of the analysis of GC-TOF raw data, aliquot ratio analysis to systematically remove artifact signals and tools for the use of principal component analysis (PCA) on metabolomic datasets are proposed. Cells subjected to nitrogen (N), phosphorus (P), sulfur (S) or iron (Fe) depleted growth conditions develop highly distinctive metabolite profiles with metabolites implicated in many different processes being affected in their concentration during adaptation to nutrient deprivation. Metabolite profiling allowed characterization of both specific and general responses to nutrient deprivation at the metabolite level. Modulation of the substrates for N-assimilation and the oxidative pentose phosphate pathway indicated a priority for maintaining the capability for immediate activation of N assimilation even under conditions of decreased metabolic activity and arrested growth, while the rise in 4-hydroxyproline in S deprived cells could be related to enhanced degradation of proteins of the cell wall. The adaptation to sulfur deficiency was analyzed with greater temporal resolution and responses of wild-type cells were compared with mutant cells deficient in SAC1, an important regulator of the sulfur deficiency response. Whereas concurrent metabolite depletion and accumulation occurs during adaptation to S deprivation in wild-type cells, the sac1 mutant strain is characterized by a massive incapability to sustain many processes that normally lead to transient or permanent accumulation of the levels of certain metabolites or recovery of metabolite levels after initial down-regulation. For most of the steps in arginine biosynthesis in Chlamydomonas mutants have been isolated that are deficient in the respective enzyme activities. Three strains deficient in the activities of N-acetylglutamate-5-phosphate reductase (arg1), N2 acetylornithine-aminotransferase (arg9), and argininosuccinate lyase (arg2), respectively, were analyzed with regard to activation of endogenous arginine biosynthesis after withdrawal of externally supplied arginine. Enzymatic blocks in the arginine biosynthetic pathway could be characterized by precursor accumulation, like the amassment of argininosuccinate in arg2 cells, and depletion of intermediates occurring downstream of the enzymatic block, e.g. N2-acetylornithine, ornithine, and argininosuccinate depletion in arg9 cells. The unexpected finding of substantial levels of the arginine pathway intermediates N-acetylornithine, citrulline, and argininosuccinate downstream the enzymatic block in arg1 cells provided an explanation for the residual growth capacity of these cells in the absence of external arginine sources. The presence of these compounds, together with the unusual accumulation of N-Acetylglutamate, the first intermediate that commits the glutamate backbone to ornithine and arginine biosynthesis, in arg1 cells suggests that alternative pathways, possibly involving the activity of ornithine aminotransferase, may be active when the default reaction sequence to produce ornithine via acetylation of glutamate is disabled.}, language = {en} }