@article{AwadConradKochetal.2010, author = {Awad, Duha Jawad and Conrad, Franziska and Koch, Andreas and Schilde, Uwe and Poeppl, Andreas and Strauch, Peter}, title = {1,10-phenanthroline-dithiolate mixed ligand transition metal complexes : synthesis, characterization and EPR spectroscopy}, issn = {0020-1693}, doi = {10.1016/j.ica.2010.01.021}, year = {2010}, abstract = {A series of new N2S2 mixed ligand transition metal complexes, where N-2 is phenanthroline and S-2 is 1,2- dithiooxalate (dto) or 1,2-dithiosquarate (dtsq), has been synthesized and characterized. IR spectra reveal that the 1,2- dithiolate ligands are coordinated via the sulfur atoms forming a N2S2 coordination sphere. The copper(II) complex [Cu(phen)(dto)] was studied by EPR spectroscopy as a diamagnetically diluted powder. The diamagnetic dilution resulted from doping of the copper complex into the isostructural host lattice of the nickel complex [Ni(phen)(dto)]. The electronic situation in the frontier orbitals of the copper complex calculated from the experimental data is compared to the results of EHT and DFT calculations. Furthermore, one side product, chlorobis(1,10-phenanthroline)copper(I) ethanol solvate hydrate [(phen)(2)CuCl]center dot C2H5OH center dot H2O, was formed by a reduction process and characterized by X-ray diffraction. In the crystal packing one-dimensional columns of dimers are formed, stabilized by significant pi-pi interactions.}, language = {en} } @article{AwadConradKochetal.2010, author = {Awad, Duha Jawad and Conrad, Franziska and Koch, Andreas and Friedrich, Alwin and Poeppl, Andreas and Strauch, Peter}, title = {2,2'-Bipyridin-1,2-dithiolat Gemischtligand-Komplexe : Systhese, Charakterisierung und EPR-Spektroskopie}, issn = {0932-0776}, year = {2010}, abstract = {A series of new 2 2'-bipyridine/1 2-dithiolate transition metal complexes has been synthesised and characterised As 1,2-dithiolate ligands 1,2 dithiooxalate (dto) and 1 2-dithiosquarate (dtsq) were used It follows from the IR spectra that the multidentate dithiolate ligands coordinate exclusively via their sulfur atoms forming an MN2S2 coordination sphere The central metal ions (M) are Cu2+ Ni2+ Pd2+ Pt2+, and Zn2+ The complex [Cu-II(bpy)(dto)] could be studied by EPR spectroscopy and was measured as powder diamagnetically diluted in the isostructural [Ni-II(bpy)(dto)] host structure The spin density contribution calculated from the experimental parameters is compared with the electronic situation in the frontier orbitals namely in the semi occupied SOMO of the copper complex derived from quantum chemical calculations on different levels (EHT and DFT)}, language = {de} } @article{StrehmelRexhausenStrauch2010, author = {Strehmel, Veronika and Rexhausen, Hans and Strauch, Peter}, title = {2,2,6,6-Tetramethylpiperidine-1-yloxyl bound to the imidazolium ion by an acetamido group for investigation of ionic liquids}, issn = {0040-4039}, doi = {10.1016/j.tetlet.2009.11.124}, year = {2010}, abstract = {New spin probes bearing the 2,2,6,6-tetramethylpiperidine-1-yloxyl covalently bound to the imidazolium ion via a methylene spacer and an amide group are synthesized. If the anion is bis(trifluoromethylsulfonylimide) instead of iodide, the new spin probe has a similar structure as that of an ionic liquid. Nevertheless, the new spin probes are useful tools to investigate ionic liquids.}, language = {en} } @phdthesis{Staude2010, author = {Staude, Lucia}, title = {3R,4R-Hexa-1,5-dien-3,4-diol : ein vielseitiger C2-symmetrischer Baustein in der organischen Synthese}, address = {Potsdam}, pages = {XV, 122, 68 S. : graph. Darst.}, year = {2010}, language = {de} } @article{LazarevaShainyanKleinpeter2010, author = {Lazareva, Nataliya F. and Shainyan, Bagrat A. and Kleinpeter, Erich}, title = {4-Alkyl-2,2,6,6-tetramethyl-1,4,2,6-oxaazadisilinanes : synthesis, structure, and conformational analysis}, issn = {0894-3230}, doi = {10.1002/Poc.1605}, year = {2010}, abstract = {4-Alkyl-2,2,6,6-tetramethyl-1,4,2,6-oxaazadisilinanes RN[CH2Si(Me)2]2O [R = Me (1), i-Pr (2)] were synthesized by two methods which provided good yields up to 84\%. Low temperature NMR study of compounds (1) and (2) revealed a frozen ring inversion with the energy barriers of 8.5 and 7.7 kcal/mol at 163 and 143 K, respectively, which is substantially lower than that for their carbon analog, N-methylmorpholine. DFT calculations performed on the example of molecule (1) showed that N-Meax conformer to exist in the sofa conformation with the coplanar fragment C-Si-O-Si-C, and its N-Meeq conformer in a flattened chair conformation.}, language = {en} } @article{WessigMoellnitzHuebner2010, author = {Wessig, Pablo and M{\"o}llnitz, Kristian and H{\"u}bner, Sebastian}, title = {A short and efficient route from myo- to neo-inositol}, issn = {0936-5214}, doi = {10.1055/s-0029-1220071}, year = {2010}, abstract = {An efficient route from myo- to neo-inositol is described. The key steps of the sequence are oxidation of the hydroxy group at C-5 to the corresponding ketone, followed by a highly (dr = 7.8:1) stereoselective reduction. The route includes nine steps with an overall yield of 51\% and is therefore superior to all hitherto reported methods for the preparation of neo-inositol.}, language = {en} } @phdthesis{Bai2010, author = {Bai, Shuo}, title = {Active hydrogels with nanocomposites}, address = {Potsdam}, pages = {VI, 109 Bl. : Ill., graph. Darst.}, year = {2010}, language = {en} } @article{BiermannMetzgerMeier2010, author = {Biermann, Ursula and Metzger, Juergen O. and Meier, Michael A. R.}, title = {Acyclic triene metathesis oligo- and polymerization of high oleic sun flower oil}, issn = {1022-1352}, doi = {10.1002/macp.200900615}, year = {2010}, abstract = {High oleic sunflower oil, a renewable raw material consisting of triglycerides with internal C=C-double bonds, was polymerized via acyclic triene metathesis (ATMET) to highly branched and functionalized polyesters. If the Hoveyda- Grubbs second generation catalyst was used and methyl acrylate was introduced as a chain stopper, the molecular weight of the obtained polymers could be tuned by varying the ratio of the triglyceride and methyl acrylate. Using the first generation Grubbs catalyst for the polymerization of high oleic sunflower oil, no cross-linking was observed, even without the use of a chain stopper. The resulting branched materials were characterized by GPC, H-1 and C-13 NMR, and ESI-MS.}, language = {en} } @phdthesis{Zehm2010, author = {Zehm, Daniel}, title = {Amphiphile Block-B{\"u}rstenpolymere : ihre Synthese durch sequentielle Anwendung von CRP-Methoden und ihre Selbstorganisation in ausgew{\"a}hlten L{\"o}sungsmitteln}, address = {Potsdam}, pages = {XI, 166 S. : graph. Darst.}, year = {2010}, language = {de} } @article{ZehmLaschewskyGradzielskietal.2010, author = {Zehm, Daniel and Laschewsky, Andr{\´e} and Gradzielski, Michael and Pr{\´e}vost, Sylvain and Liang, Hua and Rabe, J{\"u}rgen P. and Schweins, Ralf and Gummel, J{\´e}r{\´e}mie}, title = {Amphiphilic dual brush block copolymers as "giant surfactants" and their aqueous self-assembly}, issn = {0743-7463}, doi = {10.1021/La903087p}, year = {2010}, abstract = {Amphiphilic dual brush diblock as well as symmetrical triblock polymers were synthesized by the overlay of the reversible addition-fragmentation chain transfer and the nitroxide mediated polymerization (NMP) techniques. While poly(ethylene glycol) brushes served as hydrophilic block, the hydrophobic block was made of polystyrene brushes. The resulting "giant surfactants" correspond structurally to the established amphiphilic diblock and triblock copolymer known as macrosurfactants. The aggregation behavior of the novel "giant surfactants" in aqueous solution was studied by dynamic light scattering, small-angle neutron scattering (SANS), and small-angle X-ray scattering (SAXS) over a large range in reciprocal space. Further, the self-assembled aggregates Were investigated by scanning force microscopy (SFM) after deposition on differently functionalized ultraflat solid substrates. Despite the high fraction of hydrophobic segments, the polymers form stable mesoscopic, spherical aggregates with hydrodynamic diameters in the range of 150-350 nm. Though prepared from well-defined individual polymers, the aggregates show several similarities to hard core latexes. They are stable enough to he deposited without much changes onto surfaces, where they cluster and show Spontaneous sorting according to their size within the clusters, with the larger aggregates being in the center.}, language = {en} } @article{TronciNeffePierceetal.2010, author = {Tronci, Giuseppe and Neffe, Axel T. and Pierce, Benjamin Franklin and Lendlein, Andreas}, title = {An entropy-elastic gelatin-based hydrogel system}, issn = {0959-9428}, doi = {10.1039/C0jm00883d}, year = {2010}, abstract = {Gelatin is a non-immunogenic and degradable biopolymer, which is widely applied in the biomedical field e. g. for drug capsules or as absorbable hemostats. However, gelatin materials present limited and hardly reproducible mechanical properties especially in aqueous systems, particularly caused by the uncontrollable partial renaturation of collagen-like triple helices. Therefore, mechanically demanding applications for gelatin-based materials, such as vascular patches, i.e. hydrogel films that seal large incisions in vessel walls, and for induced autoregeneration, are basically excluded if this challenge is not addressed. Through the synthesis of a defined chemical network of gelatin with hexamethylene diisocyanate (HDI) in DMSO, the self-organization of gelatin chains could be hindered and amorphous gelatin films were successfully prepared having Young's moduli of 60-530 kPa. Transferring the crosslinking reaction with HDI and, alternatively, ethyl lysine diisocyanate (LDI), to water as reaction medium allowed the tailoring of swelling behaviour and mechanical properties by variation of crosslinker content while suppressing the formation of helices. The hydrogels had Young's moduli of 70-740 kPa, compressive moduli of 16-48 kPa, and degrees of swelling of 300-800 vol\%. Test reactions investigated by ESI mass spectrometry allowed the identification and quantification of reaction products of the crosslinking reaction. The HDI crosslinked networks were stabilized by direct covalent crosslinks (ca. 10 mol\%), supported by grafting (50 mol\%) and blending of hydrophobic oligomeric chains. For the LDI- based networks, less crosslinked (3 mol\%) and grafted species (5 mol\%) and much higher amounts of oligomers were observed. The adjustable hydrogel system enables the application of gelatin-based materials in physiological environments.}, language = {en} } @article{deAraujoChaconCarneiroetal.2010, author = {de Araujo, Martha T. and Chacon, Eluzir P. and Carneiro, Jos{\´e} W. de M. and Koch, Andreas and Kleinpeter, Erich}, title = {Analysis of anisotropic effects in trinuclear metal carbonyl compounds by visualization of through-space NMR shielding}, issn = {1610-2940}, doi = {10.1007/s00894-010-0662-3}, year = {2010}, abstract = {Through-space NMR shieldings were calculated for trinuclear metal-carbonyl compounds [M-3(CO)(12)] (M = Fe, Ru, Os), employing the nucleus-independent chemical shift approach. The through-space shieldings were visualized as a contour plot of iso-chemical shielding surfaces, and were applied to quantify the overall anisotropic effect of the carbonyl groups, as well as to identify the influence of the transition metal on the scopes of the corresponding anisotropy cones. The shielding surfaces show that the anisotropic effect of the carbonyl groups at equatorial positions changes depending on the metal. This effect was associated with pi-backdonation from the metal to the carbonyl groups in that position, in agreement with geometric data as well as calculated NMR parameters. Therefore, visualization of the through-space NMR shieldings of trinuclear metal-carbonyl compounds of group 8 is able to reflect the distinct arrangements of the carbonyl groups in these organometallic compounds.}, language = {en} } @article{KihampaNkunyaJosephetal.2010, author = {Kihampa, Charles and Nkunya, Mayunga H. H. and Joseph, Cosam C. and Magesa, Stephen M. and Hassanali, Ahmed and Heydenreich, Matthias and Kleinpeter, Erich}, title = {Antimosquito and antimicrobial clerodanoids and a chlorobenzoid from Tessmannia species}, issn = {1934-578X}, year = {2010}, abstract = {The clerodane diterpenoids trans-kolavenolic acid, 18-oxocleroda-3,13(E)-dien-15-oic acid, ent-(18- hydroxycarbonyl)-cleroda- 3,13(E)-dien-15-oate, 2-oxo-ent-cleroda-3,13(Z)-dien-15-oic acid and trans-2-oxo-ent-cleroda- 13(Z)-en-15-oic acid, and the chlorobenzenoid O-(3-hydroxy-4-hydroxycarbonyl-5-pentylphenyl)-3-chloro-4-methoxy-6-pentyl- 2-oxybenzoic acid were isolated from Tessmannia martiniana var pauloi and T. martiniana var matiniana. Structures were established based on interpretation of spectroscopic data. Some of the compounds exhibited significant antimosquito, antifungal and antibacterial activities.}, language = {en} } @phdthesis{Laemmermann2010, author = {L{\"a}mmermann, Anica}, title = {Anwendung von Substituenteneffekten zur Strukturaufkl{\"a}rung mittels NMR-Spektroskopie und Moleculare Modelling}, address = {Potsdam}, pages = {114, XIII S.}, year = {2010}, language = {de} } @article{FandrichFalkenhagenWeidneretal.2010, author = {Fandrich, Nick and Falkenhagen, Jana and Weidner, Steffen M. and Pfeifer, Dietmar and Staal, Bastiaan and Thuenemann, Andreas F. and Laschewsky, Andr{\´e}}, title = {Characterization of new amphiphilic block copolymers of N-vinyl pyrrolidone and vinyl acetate, 1-analysis of copolymer composition, end groups, molar masses and molar mass distributions}, issn = {1022-1352}, doi = {10.1002/macp.200900466}, year = {2010}, abstract = {New amphiphilic block copolymers consisting of N-vinyl pyrrolidone and vinyl acetate were synthesized via controlled radical polymerization using a reversible addition/fragmentation chain transfer (RAFT)/macromolecular design via the interchange of xanthates (MADIX) system. The synthesis was carried out in 1,4-dioxane as process solvent. In order to get conclusions on the mechanism of the polymerization the molecular structure of formed copolymers was analysed by means of different analytical techniques. C-13 NMR spectroscopy was used for the determination of the monomer ratios. End groups were analysed by means of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This technique was also used to determine possible fragmentations of the RAFT end groups. By means of a combination of size exclusion chromatography, C-13 NMR and static light scattering molar mass distributions and absolute molar masses could be analysed. The results clearly show a non-ideal RAFT mechanism.}, language = {en} } @article{FandrichFalkenhagenWeidneretal.2010, author = {Fandrich, Nick and Falkenhagen, Jana and Weidner, Steffen M. and Staal, Bastiaan and Thuenemann, Andreas F. and Laschewsky, Andr{\´e}}, title = {Characterization of new amphiphilic block copolymers of N-vinylpyrrolidone and vinyl acetate, 2-chromatographic separation and analysis by MALDI-TOF and FT-IR coupling}, issn = {1022-1352}, doi = {10.1002/macp.201000044}, year = {2010}, abstract = {PVP-block-PVAc block copolymers were synthesized by controlled radical polymerization applying a RAFT/MADIX system and were investigated by HPLC and by coupling of chromatography to FT-IR spectroscopy and MALDI-TOF MS. Chromatographic methods (LACCC and gradient techniques) were developed that allowed a separation of block copolymers according to their repeating units. The results of the spectroscopic and spectrometric analysis clearly showed transfer between radicals and process solvent. With the use of hyphenated techniques differences between main and side products were detected. In agreement with previously published results, obtained by NMR, SEC, static light scattering and MALDI- TOF MS, our data proved a non-ideal RAFT polymerization.}, language = {en} } @article{SchwarzeDoscheFlehretal.2010, author = {Schwarze, Thomas and Dosche, Carsten and Flehr, Roman and Klamroth, Tillmann and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Saalfrank, Peter and Cleve, Ernst and Buschmann, Hans-J{\"u}rgen and Holdt, Hans-J{\"u}rgen}, title = {Combination of a CT modulated PET and an intramolecular excimer formation to quantify PdCl2 by large fluorescence enhancement}, issn = {1359-7345}, doi = {10.1039/B919973j}, year = {2010}, abstract = {The [6.6](9,10)anthracenophane 1 (Scheme 1) is a selective fluoroionophore for the detection of PdCl2 with a large fluorescence enhancement factor (I/I-0 > 250).}, language = {en} } @article{SchwarzeDoscheFlehretal.2010, author = {Schwarze, Thomas and Dosche, Carsten and Flehr, Roman and Klamroth, Tillmann and L{\"o}hmannsr{\"o}ben, Hans-Gerd and Saalfrank, Peter and Cleve, Ernst and Buschmann, Hans-J{\"u}rgen and Holdt, Hans-J{\"u}rgen}, title = {Combination of a CT modulated PET and an intramolecular excimer formation to quantify PdCl2 by large fluorescence enhancement}, issn = {1359-7345}, year = {2010}, language = {en} } @phdthesis{Gentsch2010, author = {Gentsch, Rafael}, title = {Complex bioactive fiber systems by means of electrospinning}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-44900}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Nanofibrous mats are interesting scaffold materials for biomedical applications like tissue engineering due to their interconnectivity and their size dimension which mimics the native cell environment. Electrospinning provides a simple route to access such fiber meshes. This thesis addresses the structural and functional control of electrospun fiber mats. In the first section, it is shown that fiber meshes with bimodal size distribution could be obtained in a single-step process by electrospinning. A standard single syringe set-up was used to spin concentrated poly(ε-caprolactone) (PCL) and poly(lactic-co-glycolic acid) (PLGA) solutions in chloroform and meshes with bimodal-sized fiber distribution could be directly obtained by reducing the spinning rate at elevated humidity. Scanning electron microscopy (SEM) and mercury porosity of the meshes suggested a suitable pore size distribution for effective cell infiltration. The bimodal fiber meshes together with unimodal fiber meshes were evaluated for cellular infiltration. While the micrometer fibers in the mixed meshes generate an open pore structure, the submicrometer fibers support cell adhesion and facilitate cell bridging on the large pores. This was revealed by initial cell penetration studies, showing superior ingrowth of epithelial cells into the bimodal meshes compared to a mesh composed of unimodal 1.5 μm fibers. The bimodal fiber meshes together with electrospun nano- and microfiber meshes were further used for the inorganic/organic hybrid fabrication of PCL with calcium carbonate or calcium phosphate, two biorelevant minerals. Such composite structures are attractive for the potential improvement of properties such as stiffness or bioactivity. It was possible to encapsulate nano and mixed sized plasma-treated PCL meshes to areas > 1 mm2 with calcium carbonate using three different mineralization methods including the use of poly(acrylic acid). The additive seemed to be useful in stabilizing amorphous calcium carbonate to effectively fill the space between the electrospun fibers resulting in composite structures. Micro-, nano- and mixed sized fiber meshes were successfully coated within hours by fiber directed crystallization of calcium phosphate using a ten-times concentrated simulated body fluid. It was shown that nanofibers accelerated the calcium phosphate crystallization, as compared to microfibers. In addition, crystallizations performed at static conditions led to hydroxyapatite formations whereas in dynamic conditions brushite coexisted. In the second section, nanofiber functionalization strategies are investigated. First, a one-step process was introduced where a peptide-polymer-conjugate (PLLA-b-CGGRGDS) was co-spun with PLGA in such a way that the peptide is enriched on the surface. It was shown that by adding methanol to the chloroform/blend solution, a dramatic increase of the peptide concentration at the fiber surface could be achieved as determined by X-ray photoelectron spectroscopy (XPS). Peptide accessibility was demonstrated via a contact angle comparison of pure PLGA and RGD-functionalized fiber meshes. In addition, the electrostatic attraction between a RGD-functionalized fiber and a silica bead at pH ~ 4 confirmed the accessibility of the peptide. The bioactivity of these RGD-functionalized fiber meshes was demonstrated using blends containing 18 wt\% bioconjugate. These meshes promoted adhesion behavior of fibroblast compared to pure PLGA meshes. In a second functionalization approach, a modular strategy was investigated. In a single step, reactive fiber meshes were fabricated and then functionalized with bioactive molecules. While the electrospinning of the pure reactive polymer poly(pentafluorophenyl methacrylate) (PPFPMA) was feasible, the inherent brittleness of PPFPMA required to spin a PCL blend. Blends and pure PPFPMA showed a two-step functionalization kinetics. An initial fast reaction of the pentafluorophenyl esters with aminoethanol as a model substance was followed by a slow conversion upon further hydrophilization. This was analysed by UV/Vis-spectroscopy of the pentaflurorophenol release upon nucleophilic substitution with the amines. The conversion was confirmed by increased hydrophilicity of the resulting meshes. The PCL/PPFPMA fiber meshes were then used for functionalization with more complex molecules such as saccharides. Aminofunctionalized D-Mannose or D-Galactose was reacted with the active pentafluorophenyl esters as followed by UV/Vis spectroscopy and XPS. The functionality was shown to be bioactive using macrophage cell culture. The meshes functionalized with D-Mannose specifically stimulated the cytokine production of macrophages when lipopolysaccharides were added. This was in contrast to D-Galactose- or aminoethanol-functionalized and unfunctionalized PCL/PPFPMA fiber mats.}, language = {en} } @phdthesis{Belova2010, author = {Belova, Valentina}, title = {Composite fabrication and surface modification via high intensity ultrasound}, address = {Potsdam}, pages = {113, XII S. : zahlr. Ill. und graph. Darst.}, year = {2010}, language = {en} }