@article{ZhangRudolphBenitezetal.2019,
  author    = {Zhang, Quanchao and Rudolph, Tobias and Benitez, Alejandro J. and Gould, Oliver E. C. and Behl, Marc and Kratz, Karl and Lendlein, Andreas},
  title     = {Temperature-controlled reversible pore size change of electrospun fibrous shape-memory polymer actuator based meshes},
  series = {Smart materials and structures},
  volume    = {28},
  journal   = {Smart materials and structures},
  number    = {5},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0964-1726},
  doi       = {10.1088/1361-665X/ab10a1},
  pages     = {10},
  year      = {2019},
  abstract  = {Fibrous membranes capable of dynamically responding to external stimuli are highly desirable in textiles and biomedical materials, where adaptive behavior is required to accommodate complex environmental changes. For example, the creation of fabrics with temperature-dependent moisture permeability or self-regulating membranes for air filtration is dependent on the development of materials that exhibit a reversible stimuli-responsive pore size change. Here, by imbuing covalently crosslinked poly(ε-caprolactone) (cPCL) fibrous meshes with a reversible bidirectional shape-memory polymer actuation (rbSMPA) we create a material capable of temperature-controlled changes in porosity. Cyclic thermomechanical testing was used to characterize the mechanical properties of the meshes, which were composed of randomly arranged microfibers with diameters of 2.3 ± 0.6 μm giving an average pore size of approx. 10 μm. When subjected to programming strains of εm = 300\% and 100\% reversible strain changes of εʹrev = 22\% ± 1\% and 6\% ± 1\% were measured, with switching temperature ranges of 10 °C-30 °C and 45 °C-60 °C for heating and cooling, respectively. The rbSMPA of cPCL fibrous meshes generated a microscale reversible pore size change of 11\% ± 3\% (an average of 1.5 ± 0.6 μm), as measured by scanning electron microscopy. The incorporation of a two-way shape-memory actuation capability into fibrous meshes is anticipated to advance the development and application of smart membrane materials, creating commercially viable textiles and devices with enhanced performance and novel functionality.},
  language  = {en}
}
@article{ZhangBehlPengetal.2019,
  author    = {Zhang, Pengfei and Behl, Marc and Peng, Xingzhou and Balk, Maria and Lendlein, Andreas},
  title     = {Chemoresponsive Shape-Memory Effect of Rhodium-Phosphine Coordination Polymer Networks},
  series = {Chemistry of materials : a publication of the American Chemical Society},
  volume    = {31},
  journal   = {Chemistry of materials : a publication of the American Chemical Society},
  number    = {15},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {0897-4756},
  doi       = {10.1021/acs.chemmater.9b00363},
  pages     = {5402 -- 5407},
  year      = {2019},
  abstract  = {Chemoresponsive polymers are of technological significance for smart sensors or systems capable of molecular recognition. An important key requirement for these applications is the material's structural integrity after stimulation. We explored whether covalently cross-linked metal ion-phosphine coordination polymers (MPN) can be shaped into any temporary shape and are capable of recovering from this upon chemoresponsive exposure to triphenylphosphine (Ph3P) ligands, whereas the MPN provide structural integrity. Depending on the metal-ion concentration used during synthesis of the MPN, the degree of swelling of the coordination polymer networks could be adjusted. Once the MPN was immersed into Ph3P solution, the reversible ligand-exchange reaction between the metal ions and the free Ph3P in solution causes a decrease of the coordination cross-link density in MPN again. The Ph3P-treated MPN was able to maintain its original shape, indicating a certain stability of shape even after stimulation. In this way, chemoresponsive control of the elastic properties (increase in volume and decrease of mechanical strength) of the MPN was demonstrated. This remarkable behavior motivated us to explore whether the MPN are capable of a chemoresponsive shape-memory effect. In initial experiments, shape fixity of around 60\% and shape recovery of almost 90\% were achieved when the MPN was exposed to Ph3P in case of rhodium. Potential applications for chemoresponsive shape-memory systems could be shapable semiconductors, e.g., for lighting or catalysts, which provide catalytic activity on demand.},
  language  = {en}
}
@article{YuanNeriZakrietal.2019,
  author    = {Yuan, Jinkai and Neri, Wilfrid and Zakri, Cecile and Merzeau, Pascal and Kratz, Karl and Lendlein, Andreas and Poulin, Philippe},
  title     = {Shape memory nanocomposite fibers for untethered high-energy microengines},
  series = {Science},
  volume    = {365},
  journal   = {Science},
  number    = {6449},
  publisher = {American Assoc. for the Advancement of Science},
  address   = {Washington},
  issn      = {0036-8075},
  doi       = {10.1126/science.aaw3722},
  pages     = {155 -- 158},
  year      = {2019},
  abstract  = {Classic rotating engines are powerful and broadly used but are of complex design and difficult to miniaturize. It has long remained challenging to make large-stroke, high-speed, high-energy microengines that are simple and robust. We show that torsionally stiffened shape memory nanocomposite fibers can be transformed upon insertion of twist to store and provide fast and high-energy rotations. The twisted shape memory nanocomposite fibers combine high torque with large angles of rotation, delivering a gravimetric work capacity that is 60 times higher than that of natural skeletal muscles. The temperature that triggers fiber rotation can be tuned. This temperature memory effect provides an additional advantage over conventional engines by allowing for the tunability of the operation temperature and a stepwise release of stored energy.},
  language  = {en}
}
@article{WangXuLietal.2019,
  author    = {Wang, Weiwei and Xu, Xun and Li, Zhengdong and Kratz, Karl and Ma, Nan and Lendlein, Andreas},
  title     = {Modulating human mesenchymal stem cells using poly(n-butyl acrylate) networks in vitro with elasticity matching human arteries},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {71},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {2},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-189418},
  pages     = {277 -- 289},
  year      = {2019},
  abstract  = {Non-swelling hydrophobic poly(n-butyl acrylate) network (cPnBA) is a candidate material for synthetic vascular grafts owing to its low toxicity and tailorable mechanical properties. Mesenchymal stem cells (MSCs) are an attractive cell type for accelerating endothelialization because of their superior anti-thrombosis and immune modulatory function. Further, they can differentiate into smooth muscle cells or endothelial-like cells and secret pro-angiogenic factors such as vascular endothelial growth factor (VEGF). MSCs are sensitive to the substrate mechanical properties, with the alteration of their major cellular behavior and functions as a response to substrate elasticity. Here, we cultured human adipose-derived mesenchymal stem cells (hADSCs) on cPnBAs with different mechanical properties (cPnBA250, Young's modulus (E) = 250 kPa; cPnBA1100, E = 1100 kPa) matching the elasticity of native arteries, and investigated their cellular response to the materials including cell attachment, proliferation, viability, apoptosis, senescence and secretion. The cPnBA allowed high cell attachment and showed negligible cytotoxicity. F-actin assembly of hADSCs decreased on cPnBA films compared to classical tissue culture plate. The difference of cPnBA elasticity did not show dramatic effects on cell attachment, morphology, cytoskeleton assembly, apoptosis and senescence. Cells on cPnBA250, with lower proliferation rate, had significantly higher VEGF secretion activity. These results demonstrated that tuning polymer elasticity to regulate human stem cells might be a potential strategy for constructing stem cell-based artificial blood vessels.},
  language  = {en}
}
@article{TarazonaMachatschekSchulzetal.2019,
  author    = {Tarazona, Natalia A. and Machatschek, Rainhard Gabriel and Schulz, Burkhard and Auxiliadora Prieto Jim{\´e}nez, M. and Lendlein, Andreas},
  title     = {Molecular Insights into the Physical Adsorption of Amphiphilic Protein PhaF onto Copolyester Surfaces},
  series = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  volume    = {20},
  journal   = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  number    = {9},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1525-7797},
  doi       = {10.1021/acs.biomac.9b00069},
  pages     = {3242 -- 3252},
  year      = {2019},
  abstract  = {Phasins are amphiphilic proteins located at the polymer-cytoplasm interface of bacterial polyhydroxyalkanoates (PHA). The immobilization of phasins on biomaterial surfaces is a promising way to enhance the hydrophilicity and supply cell- directing elements in bioinstructing processes. Optimizing the physical adsorption of phasins requires deep insights into molecular processes during polymer-protein interactions to preserve their structural conformation while optimizing surface coverage. Here, the assembly, organization, and stability of phasin PhaF from Pseudomonas putida at interfaces is disclosed. The Langmuir technique, combined with in situ microscopy and spectroscopic methods, revealed that PhaF forms stable and robust monolayers at different temperatures, with an almost flat orientation of its alpha-helix at the air-water interface. PhaF adsorption onto preformed monolayers of poly[(3-R-hydroxyoctanoate)-co-(3-R-hydroxyhexanoate)] (PHOHHx), yields stable mixed layers below pi = similar to 15.7 mN/m. Further insertion induces a molecular reorganization. PHOHHx with strong surface hydrophobicity is a more adequate substrate for PhaF adsorption than the less hydrophobic poly[(rac-lactide)-co-glycolide] (PLGA). The observed orientation of the main axis of the protein in relation to copolyester interfaces ensures the best exposure of the hydrophobic residues, providing a suitable coating strategy for polymer functionalization.},
  language  = {en}
}
@article{TarazonaMachatschekLendlein2019,
  author    = {Tarazona, Natalia A. and Machatschek, Rainhard Gabriel and Lendlein, Andreas},
  title     = {Unraveling the interplay between abiotic hydrolytic degradation and crystallization of bacterial polyesters comprising short and medium side-chain-length Polyhydroxyalkanoates},
  series = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  volume    = {21},
  journal   = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  number    = {2},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1525-7797},
  doi       = {10.1021/acs.biomac.9b01458},
  pages     = {761 -- 771},
  year      = {2019},
  abstract  = {Polyhydroxyalkanoates (PHAs) have attracted attention as degradable (co)polyesters which can be produced by microorganisms with variations in the side chain. This structural variation influences not only the thermomechanical properties of the material but also its degradation behavior. Here, we used Langmuir monolayers at the air-water (A-W) interface as suitable models for evaluating the abiotic degradation of two PHAs with different side-chain lengths and crystallinity. By controlling the polymer state (semi crystalline, amorphous), the packing density, the pH, and the degradation mechanism, we could draw several significant conclusions. (i) The maximum degree of crystallinity for a PHA film to be efficiently degraded up to pH = 12.3 is 40\%. (ii) PHA made of repeating units with shorter side-chain length are more easily hydrolyzed under alkaline conditions. The efficiency of alkaline hydrolysis decreased by about 65\% when the polymer was 40\% crystalline. (iii) In PHA films with a relatively high initial crystallinity, abiotic degradation initiated a chemicrystallization phenomenon, detected as an increase in the storage modulus (E'). This could translate into an increase in brittleness and reduction in the material degradability. Finally, we demonstrate the stability of the measurement system for long-term experiments, which allows degradation conditions for polymers that could closely simulate real-time degradation.},
  language  = {en}
}
@article{SaretiaMachatschekSchulzetal.2019,
  author    = {Saretia, Shivam and Machatschek, Rainhard Gabriel and Schulz, Burkhard and Lendlein, Andreas},
  title     = {Reversible 2D networks of oligo(epsilon-caprolactone) at the air-water interface},
  series = {Biomedical Materials},
  volume    = {14},
  journal   = {Biomedical Materials},
  number    = {3},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {1748-6041},
  doi       = {10.1088/1748-605X/ab0cef},
  pages     = {10},
  year      = {2019},
  abstract  = {Hydroxyl terminated oligo(epsilon-caprolactone) (OCL) monolayers were reversibly cross-linked forming two dimensional networks (2D) at the air-water interface. The equilibrium reaction with glyoxal as the cross-linker is pH-sensitive. Pronounced contraction in the area of the prepared 2DOCL films in dependence of surface pressure and time revealed the process of the reaction. Cross-linking inhibited crystallization and retarded enzymatic degradation of the OCLfilm. Altering the subphase pH led to a cleavage of the covalent acetal cross-links. The reversibility of the covalent acetal cross-links was proved by observing an identical isotherm as non-cross-linked sample. Besides as model systems, these customizable reversible OCL2D networks are intended for use as pHresponsive drug delivery systems or functionalized cell culture substrates.},
  language  = {en}
}
@article{ReinthalerJohanssonBrauneetal.2019,
  author    = {Reinthaler, Markus and Johansson, Johan Backemo and Braune, Steffen and Al-Hindwan, Haitham Saleh Ali and Lendlein, Andreas and Jung, Friedrich},
  title     = {Shear-induced platelet adherence and activation in an in-vitro dynamic multiwell-plate system},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {71},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {2},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-189410},
  pages     = {183 -- 191},
  year      = {2019},
  abstract  = {Circulating blood cells are prone to varying flow conditions when contacting cardiovascular devices. For a profound understanding of the complex interplay between the blood components/cells and cardiovascular implant surfaces, testing under varying shear conditions is required. Here, we study the influence of arterial and venous shear conditions on the in vitro evaluation of the thrombogenicity of polymer-based implant materials. Medical grade poly(dimethyl siloxane) (PDMS), polyethylene terephthalate (PET) and polytetrafluoroethylene (PTFE) films were included as reference materials. The polymers were exposed to whole blood from healthy humans. Blood was agitated orbitally at low (venous shear stress: 2.8 dyne. cm(-2)) and high (arterial shear stress: 22.2 dyne .cm(-2)) agitation speeds in a well-plate based test system. Numbers of non-adherent platelets, platelet activation (P-Selectin positive platelets), platelet function (PFA100 closure times) and platelet adhesion (laser scanning microscopy (LSM)) were determined. Microscopic data and counting of the circulating cells revealed increasing numbers of material-surface adherent platelets with increasing agitation speed. Also, activation of the platelets was substantially increased when tested under the high shear conditions (P-Selectin levels, PFA-100 closure times). At low agitation speed, the platelet densities did not differ between the three materials. Tested at the high agitation speed, lowest platelet densities were observed on PDMS, intermediate levels on PET and highest on PTFE. While activation of the circulating platelets was affected by the implant surfaces in a similar manner, PFA closure times did not reflect this trend. Differences in the thrombogenicity of the studied polymers were more pronounced when tested at high agitation speed due to the induced shear stresses. Testing under varying shear stresses, thus, led to a different evaluation of the implant thrombogenicity, which emphasizes the need for testing under various flow conditions. Our data further confirmed earlier findings where the same reference implants were tested under static (and not dynamic) conditions and with fresh human platelet rich plasma instead of whole blood. This supports that the application of common reference materials may improve inter-study comparisons, even under varying test conditions.},
  language  = {en}
}
@article{RazzaqBehlLendlein2019,
  author    = {Razzaq, Muhammad Yasar and Behl, Marc and Lendlein, Andreas},
  title     = {Magneto-Mechanical Actuators with Reversible Stretching and Torsional Actuation Capabilities},
  series = {MRS Advances},
  volume    = {4},
  journal   = {MRS Advances},
  number    = {19},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2019.123},
  pages     = {1057 -- 1065},
  year      = {2019},
  abstract  = {Composite actuators consisting of magnetic nanoparticles dispersed in a crystallizable multiphase polymer system can be remotely controlled by alternating magnetic fields (AMF). These actuators contain spatially segregated crystalline domains with chemically different compositions. Here, the crystalline domain associated to low melting transition range is responsible for actuation while the crystalline domain associated to the higher melting transition range determines the geometry of the shape change. This paper reports magnetomechanical actuators which are based on a single crystalline domain of oligo(omega-pentadecalactone) (OPDL) along with covalently integrated iron(III) oxide nanoparticles (ioNPs). Different geometrical modes of actuation such as a reversible change in length or twisting were implemented by a magneto-mechanical programming procedure. For an individual actuation mode, the degree of actuation could be tailored by variation of the magnetic field strengths. This material design can be easily extended to other composites containing other magnetic nanoparticles, e.g. with a high magnetic susceptibility.},
  language  = {en}
}
@article{RazzaqBehlHeucheletal.2019,
  author    = {Razzaq, Muhammad Yasar and Behl, Marc and Heuchel, Matthias and Lendlein, Andreas},
  title     = {Matching magnetic heating and thermal actuation for sequential coupling in hybrid composites by design},
  series = {Macromolecular rapid communications},
  volume    = {41},
  journal   = {Macromolecular rapid communications},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1022-1336},
  doi       = {10.1002/marc.201900440},
  pages     = {7},
  year      = {2019},
  abstract  = {Sequentially coupling two material functions requires matching the output from the first with the input of the second function. Here, magnetic heating controls thermal actuation of a hybrid composite in a challenging system environment causing an elevated level of heat loss. The concept is a hierarchical design consisting of an inner actuator of nanocomposite material, which can be remotely heated by exposure to an alternating magnetic field (AMF) and outer layers of a porous composite system with a closed pore morphology. These porous layers act as heat insulators and as barriers to the surrounding water. By exposure to the AMF, a local bulk temperature of 71 degrees C enables the magnetic actuation of the device, while the temperature of the surrounding water is kept below 50 degrees C. Interestingly, the heat loss during magnetic heating leads to an increase of the water phase (small volume) temperature. The temperature increase is able to sequentially trigger an adjacent thermal actuator attached to the actuator composite. In this way it could be demonstrated how the AMF is able to initiate two kinds of independent actuations, which might be interesting for robotics operating in aqueous environments.},
  language  = {en}
}
@article{NieWangXuetal.2019,
  author    = {Nie, Yan and Wang, Weiwei and Xu, Xun and Zou, Jie and Bhuvanesh, Thanga and Schulz, Burkhard and Ma, Nan and Lendlein, Andreas},
  title     = {Enhancement of human induced pluripotent stem cells adhesion through multilayer laminin coating},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {70},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-189318},
  pages     = {531 -- 542},
  year      = {2019},
  abstract  = {Bioengineered cell substrates are a highly promising tool to govern the differentiation of stem cells in vitro and to modulate the cellular behavior in vivo. While this technology works fine for adult stem cells, the cultivation of human induced pluripotent stem cells (hiPSCs) is challenging as these cells typically show poor attachment on the bioengineered substrates, which among other effects causes substantial cell death. Thus, very limited types of surfaces have been demonstrated suitable for hiPSC cultures. The multilayer coating approach that renders the surface with diverse chemical compositions, architectures, and functions can be used to improve the adhesion of hiPSCs on the bioengineered substrates. We hypothesized that a multilayer formation based on the attraction of molecules with opposite charges could functionalize the polystyrene (PS) substrates to improve the adhesion of hiPSCs. Polymeric substrates were stepwise coated, first with dopamine to form a polydopamine (PDA) layer, second with polylysine and last with Laminin-521. The multilayer formation resulted in the variation of hydrophilicity and chemical functionality of the surfaces. Hydrophilicity was detected using captive bubble method and the amount of primary and secondary amines on the surface was quantified by fluorescent staining. The PDA layer effectively immobilized the upper layers and thereby improved the attachment of hiPSCs. Cell adhesion was enhanced on the surfaces coated with multilayers, as compared to those without PDA and/or polylysine. Moreover, hiPSCs spread well over this multilayer laminin substrate. These cells maintained their proliferation capacity and differentiation potential. The multilayer coating strategy is a promising attempt for engineering polymer-based substrates for the cultivation of hiPSCs and of interest for expanding the application scope of hiPSCs.},
  language  = {en}
}
@article{NaolouLendleinNeffe2019,
  author    = {Naolou, Toufik and Lendlein, Andreas and Neffe, Axel T.},
  title     = {Amides as non-polymerizable catalytic adjuncts enable the ring-opening polymerization of lactide with ferrous acetate under mild conditions},
  series = {Frontiers in Chemistry},
  volume    = {7},
  journal   = {Frontiers in Chemistry},
  publisher = {Frontiers Research Foundation},
  address   = {Lausanne},
  issn      = {2296-2646},
  doi       = {10.3389/fchem.2019.00346},
  pages     = {12},
  year      = {2019},
  abstract  = {Sn-based catalysts are effective in the ring-opening polymerization (ROP) but are toxic. Fe(OAc)(2) used as an alternative catalyst is suitable for the ROP of lactide only at higher temperatures (>170 degrees C), associated with racemization. In the ROP of ester and amide group containing morpholinediones with Fe(OAc)(2) to polydepsipeptides at 135 degrees C, ester bonds were selectively opened. Here, it was hypothesized that ROP of lactones is possible with Fe(OAc)(2) when amides are present in the reactions mixture as Fe-ligands could increase the solubility and activity of the metal catalytic center. The ROP of lactide in the melt with Fe(OAc)(2) is possible at temperatures as low as 105 degrees C, in the presence of N-ethylacetamide or N-rnethylbenzamide as non-polymerizable catalytic adjuncts (NPCA), with high conversion (up to 99 mol\%) and yield (up to 88 mol\%). Polydispersities of polylactide decreased with decreasing reaction temperature to <= 1.1. NMR as well as polarimetric studies showed that no racemization occurred at reaction temperatures <= 145 degrees C. A kinetic study demonstrated a living chain-growth mechanism. MALDI analysis revealed that no side reactions (e.g., cyclization) occurred, though transesterification took place.},
  language  = {en}
}
@article{MazurekBudzyńskaBehlRazzaqetal.2019,
  author    = {Mazurek-Budzyńska, Magdalena and Behl, Marc and Razzaq, Muhammad Yasar and N{\"o}chel, Ulrich and Rokicki, Gabriel and Lendlein, Andreas},
  title     = {Hydrolytic stability of aliphatic poly(carbonate-urea-urethane)s: Influence of hydrocarbon chain length in soft segment},
  series = {Polymer Degradation and Stability},
  volume    = {161},
  journal   = {Polymer Degradation and Stability},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0141-3910},
  pages     = {283 -- 297},
  year      = {2019},
  abstract  = {Poly(carbonate-urethane)s (PCUs) exhibit improved resistance to hydrolytic degradation and in vivo stress cracking compared to poly(ester-urethane)s and their degradation leads to lower inflammation of the surrounding tissues. Therefore, PCUs are promising implant materials and are considered for devices such as artificial heart or spine implants. In this work, the hydrolytic stability of different poly(carbonate-urethane-urea)s (PCUUs) was studied under variation of the length of hydrocarbon chain (6, 9, 10, and 12 methylene units) between the carbonate linkages in the precursors. PCUUs were synthesized from isophorone diisocyanate and oligo(alkylene carbonate) diols using the moisture-cure method. The changes of sample weight, thermal and mechanical properties, morphology, as well as the degradation products after immersion in a buffer solution (PBS, pH = 7.4) for up to 10 weeks at 37 degrees C were monitored and analyzed. In addition, mechanical properties after 20 weeks (in PBS, 37 degrees C) were investigated. The gel content was determined based on swelling experiments in chloroform. Based on the DSC analysis, slight increases of melting transitions of PCUUs were observed, which were attributed to structure reorganization related to annealing at 37 degrees C rather than to the degradation of the PCUU. Tensile strength after 20 weeks of all investigated samples remained in the range of 29-39 MPa, whereas the elongation at break e(m) decreased only slightly and remained in the range between 670 and 800\%. Based on the characterization of degradation products after up to 10 weeks of immersion it was assessed that oligomers are mainly consisting of hard segments containing urea linkages, which could be assigned to hindered-urea dissociation mechanism. The investigations confirmed good resistance of PCUUs to hydrolysis. Only minor changes in the crystallinity, as well as thermal and mechanical properties were observed and depended on hydrocarbon chain length in soft segment of PCUUs. (C) 2019 Published by Elsevier Ltd.},
  language  = {en}
}
@article{MazurekBudzynskaRazzaqBehletal.2019,
  author    = {Mazurek-Budzynska, Magdalena and Razzaq, Muhammad Yasar and Behl, Marc and Lendlein, Andreas},
  title     = {Shape-Memory Polymers},
  series = {Functional Polymers},
  journal   = {Functional Polymers},
  publisher = {Springer},
  address   = {Cham},
  isbn      = {978-3-319-95987-0},
  issn      = {2510-3458},
  doi       = {10.1007/978-3-319-95987-0_18},
  pages     = {605 -- 663},
  year      = {2019},
  abstract  = {Shape-memory polymers (SMPs) are stimuli-sensitive materials capable of changing their shape on demand. A shape-memory function is a result of the polymer architecture together with the application of a specific programming procedure. Various possible mechanisms to induce the shape-memory effect (SME) can be realized, which can be based on thermal transitions of switching domains or on reversible molecular switches (e.g., supramolecular interactions, reversible covalent bonds). Netpoints, which connect the switching domains and determine the permanent shape, can be either provided by covalent bonds or by physical intermolecular interactions, such as hydrogen bonds or crystallites. This chapter reviews different ways of implementing the phenomenon of programmable changes in the polymer shape, including the one-way shape-memory effect (1-W SME), triple-and multi-shape effects (TSE/ MSE), the temperature-memory effect (TME), and reversible shape-memory effects, which can be realized in constant stress conditions (rSME), or in stress-free conditions (reversible bidirectional shape-memory effect (rbSME)). Furthermore, magnetically actuated SMPs and shape-memory hydrogels (SMHs) are described to show the potential of the SMP technology in biomedical applications and multifunctional approaches.},
  language  = {en}
}
@article{MachatschekSchoeneRaschdorfetal.2019,
  author    = {Machatschek, Rainhard Gabriel and Sch{\"o}ne, Anne-Christin and Raschdorf, Elisa and Ihlenburg, Ramona and Schulz, Burkhard and Lendlein, Andreas},
  title     = {Interfacial properties of morpholine-2,5-dione-based oligodepsipeptides and multiblock copolymers},
  series = {MRS Communications},
  volume    = {9},
  journal   = {MRS Communications},
  number    = {1},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2159-6859},
  doi       = {10.1557/mrc.2019.21},
  pages     = {170 -- 180},
  year      = {2019},
  abstract  = {Oligodepsipeptides (ODPs) with alternating amide and ester bonds prepared by ring-opening polymerization of morpholine-2,5-dione derivatives are promising matrices for drug delivery systems and building blocks for multifunctional biomaterials. Here, we elucidate the behavior of three telechelic ODPs and one multiblock copolymer containing ODP blocks at the air-water interface. Surprisingly, whereas the oligomers and multiblock copolymers crystallize in bulk, no crystallization is observed at the air-water interface. Furthermore, polarization modulation infrared reflection absorption spectroscopy is used to elucidate hydrogen bonding and secondary structures in ODP monolayers. The results will direct the development of the next ODP-based biomaterial generation with tailored properties for highly sophisticated applications.},
  language  = {en}
}
@misc{MachatschekSchoeneRaschdorfetal.2019,
  author    = {Machatschek, Rainhard Gabriel and Sch{\"o}ne, Anne-Christin and Raschdorf, Elisa and Ihlenburg, Ramona and Schulz, Burkhard and Lendlein, Andreas},
  title     = {Interfacial properties of morpholine-2,5-dione-based oligodepsipeptides and multiblock copolymers},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1106},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46975},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469755},
  pages     = {170 -- 180},
  year      = {2019},
  abstract  = {Oligodepsipeptides (ODPs) with alternating amide and ester bonds prepared by ring-opening polymerization of morpholine-2,5-dione derivatives are promising matrices for drug delivery systems and building blocks for multifunctional biomaterials. Here, we elucidate the behavior of three telechelic ODPs and one multiblock copolymer containing ODP blocks at the air-water interface. Surprisingly, whereas the oligomers and multiblock copolymers crystallize in bulk, no crystallization is observed at the air-water interface. Furthermore, polarization modulation infrared reflection absorption spectroscopy is used to elucidate hydrogen bonding and secondary structures in ODP monolayers. The results will direct the development of the next ODP-based biomaterial generation with tailored properties for highly sophisticated applications.},
  language  = {en}
}
@article{MachatschekLendlein2019,
  author    = {Machatschek, Rainhard Gabriel and Lendlein, Andreas},
  title     = {Fundamental insights in PLGA degradation from thin film studies},
  series = {Journal of controlled release : official journal of the Controlled Release Society and of the Japanese Society of Drug Delivery Systems},
  volume    = {319},
  journal   = {Journal of controlled release : official journal of the Controlled Release Society and of the Japanese Society of Drug Delivery Systems},
  publisher = {Elsevier},
  address   = {New York},
  issn      = {0168-3659},
  doi       = {10.1016/j.jconrel.2019.12.044},
  pages     = {276 -- 284},
  year      = {2019},
  abstract  = {Poly(lactide-co-glycolide)s are commercially available degradable implant materials, which are typically selected based on specifications given by the manufacturer, one of which is their molecular weight. Here, we address the question whether variations in the chain length and their distribution affect the degradation behavior of Poly[(rac-lactide)-co-glycolide]s (PDLLGA). The hydrolysis was studied in ultrathin films at the air-water interface in order to rule out any morphological effects. We found that both for purely hydrolytic degradation as well as under enzymatic catalysis, the molecular weight has very little effect on the overall degradation kinetics of PDLLGAs. The quantitative analysis suggested a random scission mechanism. The monolayer experiments showed that an acidic micro-pH does not accelerate the degradation of PDLLGAs, in contrast to alkaline conditions. The degradation experiments were combined with interfacial rheology measurements, which showed a drastic decrease of the viscosity at little mass loss. The extrapolated molecular weight behaved similar to the viscosity, dropping to a value near to the solubility limit of PDLLGA oligomers before mass loss set in. This observation suggests a solubility controlled degradation of PDLLGA. Conclusively, the molecular weight affects the degradation of PDLLGA devices mostly in indirect ways, e.g. by determining their morphology and porosity during fabrication. Our study demonstrates the relevance of the presented Langmuir degradation method for the design of controlled release systems.},
  language  = {en}
}
@article{LendleinGould2019,
  author    = {Lendlein, Andreas and Gould, Oliver E. C.},
  title     = {Reprogrammable recovery and actuation behaviour of shape-memory polymers},
  series = {Nature reviews. Materials},
  volume    = {4},
  journal   = {Nature reviews. Materials},
  number    = {2},
  publisher = {Nature Publ. Group},
  address   = {London},
  issn      = {2058-8437},
  doi       = {10.1038/s41578-018-0078-8},
  pages     = {116 -- 133},
  year      = {2019},
  abstract  = {Shape memory is the capability of a material to be deformed and fixed into a temporary shape. Recovery of the original shape can then be triggered only by an external stimulus. Shape-memory polymers are highly deformable materials that can be programmed to recover a memorized shape in response to a variety of environmental and spatially localized stimuli as a one-way effect. The shape-memory function can also be generated as a reversible effect enabling actuation behaviour through macroscale deformation and processing, specifically by dictating the macromolecular orientation of actuation units and of the skeleton structure of geometry-determining units in the polymers. Shape-memory polymers can be programmed and reprogrammed into arbitrary shapes. Both recovery and actuation behaviour are reprogrammable. In this Review, we outline the common basis and key differences between the two shape-memory behaviours of polymers in terms of mechanism, fabrication schemes and characterization methods. We discuss which combination of macromolecular architecture and macroscale processing is necessary for coordinated, decentralized and responsive physical behaviour. The extraction of relevant thermomechanical information is described, and design criteria are shown for microscale and macroscale morphologies to gain high levels of recovered or actuation strains as well as on-demand 2D-to-3D shape transformations. Finally, real-world applications and key future challenges are highlighted.},
  language  = {en}
}
@article{LendleinBalkTarazonaetal.2019,
  author    = {Lendlein, Andreas and Balk, Maria and Tarazona, Natalia A. and Gould, Oliver E. C.},
  title     = {Bioperspectives for Shape-Memory Polymers as Shape Programmable, Active Materials},
  series = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  volume    = {20},
  journal   = {Biomacromolecules : an interdisciplinary journal focused at the interface of polymer science and the biological sciences},
  number    = {10},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {1525-7797},
  doi       = {10.1021/acs.biomac.9b01074},
  pages     = {3627 -- 3640},
  year      = {2019},
  abstract  = {Within the natural world, organisms use information stored in their material structure to generate a physical response to a wide variety of environmental changes. The ability to program synthetic materials to intrinsically respond to environmental changes in a similar manner has the potential to revolutionize material science. By designing polymeric devices capable of responsively changing shape or behavior based on information encoded into their structure, we can create functional physical behavior, including a shape memory and an actuation capability. Here we highlight the stimuli-responsiveness and shape-changing ability of biological materials and biopolymer-based materials, plus their potential biomedical application, providing a bioperspective on shape-memory materials. We address strategies to incorporate a shape memory (actuation) function in polymeric materials, conceptualized in terms of its relationship with inputs (environmental stimuli) and outputs (shape change). Challenges and opportunities associated with the integration of several functions in a single material body to achieve multifunctionality are discussed. Finally, we describe how elements that sense, convert, and transmit stimuli have been used to create multisensitive materials.},
  language  = {en}
}
@article{KuhnlaReinthalerBrauneetal.2019,
  author    = {Kuhnla, A. and Reinthaler, Markus and Braune, Steffen and Maier, A. and Pindur, Gerhard and Lendlein, Andreas and Jung, Friedrich},
  title     = {Spontaneous and induced platelet aggregation in apparently healthy subjects in relation to age},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {71},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-199006},
  pages     = {425 -- 435},
  year      = {2019},
  abstract  = {Thrombotic disorders remain the leading cause of mortality and morbidity, despite the fact that anti-platelet therapies and vascular implants are successfully used today. As life expectancy is increasing in western societies, the specific knowledge about processes leading to thrombosis in elderly is essential for an adequate therapeutic management of platelet dysfunction and for tailoring blood contacting implants. This study addresses the limited available data on platelet function in apparently healthy subjects in relation to age, particularly in view of subjects of old age (80-98 years). Apparently healthy subjects between 20 and 98 years were included in this study. Platelet function was assessed by light transmission aggregometry and comprised experiments on spontaneous as well as ristocetin-, ADP- and collagen-induced platelet aggregation. The data of this study revealed a non-linear increase in the maximum spontaneous platelet aggregation (from 3.3\% +/- 3.3\% to 10.9\% +/- 5.9\%). The maximum induced aggregation decreased with age for ristocetin (from 85.8\% +/- 7.2\% to 75.0\% +/- 7.8\%), ADP (from 88.5\% +/- 4.6\% to 64.8\% +/- 7.3\%) and collagen (from 89.5\% +/- 3.0\% to 64.0\% +/- 4.0\%) in a non-linear manner (linear regression analysis). These observations indicate that during aging, circulating platelets become increasingly activated but lose their full aggregatory potential, a phenomenon that was earlier termed "platelet exhaustion". In this study we extended the limited existing data for spontaneous and induced platelet aggregation of apparently healthy donors above the age of 75 years. The presented data indicate that the extrapolation of data from a middle age group does not necessarily predict platelet function in apparently healthy subjects of old age. It emphasizes the need for respective studies to improve our understanding of thrombotic processes in elderly humans.},
  language  = {en}
}
@article{JiangMansfeldKratzetal.2019,
  author    = {Jiang, Yi and Mansfeld, Ulrich and Kratz, Karl and Lendlein, Andreas},
  title     = {Programmable microscale stiffness pattern of flat polymeric substrates by temperature-memo technology},
  series = {MRS Communications},
  volume    = {9},
  journal   = {MRS Communications},
  number    = {1},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2159-6859},
  doi       = {10.1557/mrc.2019.24},
  pages     = {181 -- 188},
  year      = {2019},
  abstract  = {Temperature-memory technology was utilized to generate flat substrates with a programmable stiffness pattern from cross-linked poly(ethylene-co-vinyl acetate) substrates with cylindrical microstructures. Programmed substrates were obtained by vertical compression at temperatures in the range from 60 to 100 degrees C and subsequent cooling, whereby a flat substrate was achieved by compression at 72 degrees C, as documented by scanning electron microscopy and atomic force microscopy (AFM). AFM nanoindentation experiments revealed that all programmed substrates exhibited the targeted stiffness pattern. The presented technology for generating polymeric substrates with programmable stiffness pattern should be attractive for applications such as touchpads. optical storage, or cell instructive substrates.},
  language  = {en}
}
@misc{JiangMansfeldKratzetal.2019,
  author    = {Jiang, Yi and Mansfeld, Ulrich and Kratz, Karl and Lendlein, Andreas},
  title     = {Programmable microscale stiffness pattern of flat polymeric substrates by temperature-memory technology},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  volume    = {9},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46974},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469745},
  pages     = {181 -- 188},
  year      = {2019},
  abstract  = {Temperature-memory technology was utilized to generate flat substrates with a programmable stiffness pattern from cross-linked poly(ethylene-co-vinyl acetate) substrates with cylindrical microstructures. Programmed substrates were obtained by vertical compression at temperatures in the range from 60 to 100 degrees C and subsequent cooling, whereby a flat substrate was achieved by compression at 72 degrees C, as documented by scanning electron microscopy and atomic force microscopy (AFM). AFM nanoindentation experiments revealed that all programmed substrates exhibited the targeted stiffness pattern. The presented technology for generating polymeric substrates with programmable stiffness pattern should be attractive for applications such as touchpads. optical storage, or cell instructive substrates.},
  language  = {en}
}
@article{HauserWodtkeTonderaetal.2019,
  author    = {Hauser, Sandra and Wodtke, Robert and Tondera, Christoph and Wodtke, Johanna and Neffe, Axel T. and Hampe, Jochen and Lendlein, Andreas and L{\"o}ser, Reik and Pietzsch, Jens},
  title     = {Characterization of Tissue Transglutaminase as a Potential Biomarker for Tissue Response toward Biomaterials},
  series = {ACS biomaterials science \& engineering},
  volume    = {5},
  journal   = {ACS biomaterials science \& engineering},
  number    = {11},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2373-9878},
  doi       = {10.1021/acsbiomaterials.9b01299},
  pages     = {5979 -- 5989},
  year      = {2019},
  abstract  = {Tissue transglutaminase (TGase 2) is proposed to be important for biomaterial-tissue interactions due to its presence and versatile functions in the extracellular environment. TGase 2 catalyzes the cross-linking of proteins through its Ca2+-dependent acyltransferase activity. Moreover, it enhances the interactions between fibronectin and integrins, which in turn mediates the adhesion, migration, and motility of the cells. TGase 2 is also a key player in the pathogenesis of fibrosis. In this study, we investigated whether TGase 2 is present at the biomaterial tissue interface and might serve as an informative biomarker for the visualization of tissue response toward gelatin-based biomaterials. Two differently cross-linked hydrogels were used, which were obtained by the reaction of gelatin with lysine diisocyanate ethyl ester. The overall expression of TGase 2 by endothelial cells, macrophages, and granulocytes was partly influenced by contact to the hydrogels or their degradation products, although no clear correlation was evidenced. In contrast, the secretion of TGase 2 differed remarkably between the different cells, indicating that it might be involved in the cellular reaction toward gelatin-based hydrogels. The hydrogels were implanted subcutaneously in immunocompetent, hairless SKH1-Elite mice. Ex vivo immunohistochemical analysis of tissue sections over 112 days revealed enhanced expression of TGase 2 around the hydrogels, in particular at days 14 and 21 post-implantation. The incorporation of fluorescently labeled cadaverine derivatives for the detection of active TGase 2 was in accordance with the results of the expression analysis. The presence of an irreversible inhibitor of TGase 2 led to attenuated incorporation of the cadaverines, which verified the catalytic action of TGase 2. Our in vitro and ex vivo results verified TGase 2 as a potential biomarker for tissue response toward gelatin-based hydrogels. In vivo, no TGase 2 activity was detectable, which is mainly attributed to the unfavorable physicochemical properties of the cadaverine probe used.},
  language  = {en}
}
@article{FriessWischkeLendlein2019,
  author    = {Friess, Fabian and Wischke, Christian and Lendlein, Andreas},
  title     = {Microscopic analysis of shape-shiftable oligo(epsilon-caprolactone)-based particles},
  series = {MRS advances},
  volume    = {4},
  journal   = {MRS advances},
  number    = {59-60},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2019.392},
  pages     = {3199 -- 3206},
  year      = {2019},
  abstract  = {Spherical particles are routinely monitored and described by hydrodynamic diameters determined, e.g., by light scattering techniques. Non-spherical particles such as prolate ellipsoids require alternative techniques to characterize particle size as well as particle shape. In this study, oligo(epsilon-caprolactone) (oCL) based micronetwork (MN) particles with a shape-shifting function based on their shape-memory capability were programmed from spherical to prolate ellipsoidal shape aided by incorporation and stretching in a water-soluble phantom matrix. By applying light microscopy with automated contour detection and aspect ratio analysis, differences in characteristic aspect ratio distributions of non-crosslinked microparticles (MPs) and crosslinked MNs were detected when the degrees of phantom elongation (30-290\%) are increased. The thermally induced shape recovery of programmed MNs starts in the body rather than from the tips of ellipsoids, which may be explained based on local differences in micronetwork deformation. By this approach, fascinating intermediate particle shapes with round bodies and two opposite sharp tips can be obtained, which could be of interest, e.g., in valves or other technical devices, in which the tips allow to temporarily encage the switchable particle in the desired position.},
  language  = {en}
}
@article{FriessRochSeifertetal.2019,
  author    = {Friess, Fabian and Roch, Toralf and Seifert, Barbara and Lendlein, Andreas and Wischke, Christian},
  title     = {Phagocytosis of spherical and ellipsoidal micronetwork colloids from crosslinked poly(epsilon-caprolactone)},
  series = {International Journal of Pharmaceutics},
  volume    = {567},
  journal   = {International Journal of Pharmaceutics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0378-5173},
  doi       = {10.1016/j.ijpharm.2019.118461},
  pages     = {7},
  year      = {2019},
  abstract  = {The effect of non-spherical particle shapes on cellular uptake has been reported as a general design parameter to control cellular recognition of particulate drug carriers. Beside shape, also size and cell-particle ratio should mutually effect phagocytosis. Here, the capability to control cellular uptake of poly(epsilon-caprolactone) (PCL) based polymer micronetwork colloids (MNC), a carrier system that can be transferred to various shapes, is explored in vitro at test conditions allowing multiple cell-particle contacts. PCL-based MNC were synthesized as spheres with a diameter of similar to 6, similar to 10, and 13 mu m, loaded with a fluorescent dye by a specific technique of swelling, redispersion and drying, and transferred into different ellipsoidal shapes by a phantom stretching method. The boundaries of MNC deformability to prolate ellipsoid target shapes were systematically analyzed and found to be at an aspect ratio AR of similar to 4 as obtained by a phantom elongation epsilon(ph) of similar to 150\%. Uptake studies with a murine macrophages cell line showed shape dependency of phagocytosis for selected conditions when varying particle sizes (similar to 6 and 10 mu m),and shapes (epsilon(ph): 0, 75 or 150\%), cell-particle ratios (1:1, 1:2, 1:10, 1:50), and time points (1-24 h). For larger-sized MNC, there was no significant shape effect on phagocytosis as these particles may associate with more than one cell, thus increasing the possibility of phagocytosis by any of these cells. Accordingly, controlling shape effects on phagocytosis for carriers made from degradable polymers relevant for medical applications requires considering further parameters besides shape, such as kinetic aspects of the exposure and uptake by cells.},
  language  = {en}
}
@article{FolikumahNeffeBehletal.2019,
  author    = {Folikumah, Makafui Yao and Neffe, Axel T. and Behl, Marc and Lendlein, Andreas},
  title     = {Thiol Michael-Type reactions of optically active mercapto-acids in aqueous medium},
  series = {MRS advances : a journal of the Materials Research Society},
  volume    = {4},
  journal   = {MRS advances : a journal of the Materials Research Society},
  number    = {46-47},
  publisher = {Springer Nature Switzerland AG},
  address   = {Cham},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2019.308},
  pages     = {2515 -- 2525},
  year      = {2019},
  abstract  = {Defined chemical reactions in a physiological environment are a prerequisite for the in situ synthesis of implant materials potentially serving as matrix for drug delivery systems, tissue fillers or surgical glues. 'Click' reactions like thiol Michael-type reactions have been successfully employed as bioorthogonal reaction. However, due to the individual stereo-electronic and physical properties of specific substrates, an exact understanding their chemical reactivity is required if they are to be used for in-situ biomaterial synthesis. The chiral (S)-2-mercapto-carboxylic acid analogues of L-phenylalanine (SH-Phe) and L-leucine (SH-Leu) which are subunits of certain collagenase sensitive synthetic peptides, were explored for their potential for in-situ biomaterial formation via the thiol Michael-type reaction. In model reactions were investigated the kinetics, the specificity and influence of stereochemistry of this reaction. We could show that only reactions involving SH-Leu yielded the expected thiol-Michael product. The inability of SH-Phe to react was attributed to the steric hindrance of the bulky phenyl group. In aqueous media, successful reaction using SH-Leu is thought to proceed via the sodium salt formed in-situ by the addition of NaOH solution, which was intented to aid the solubility of the mercapto-acid in water. Fast reaction rates and complete acrylate/maleimide conversion were only realized at pH 7.2 or higher suggesting the possible use of SH-Leu under physiological conditions for thiol Michael-type reactions. This method of in-situ formed alkali salts could be used as a fast approach to screen mercapto-acids for thio Michael-type reactions without the synthesis of their corresponding esters.},
  language  = {en}
}
@article{DengZouWangetal.2019,
  author    = {Deng, Zijun and Zou, Jie and Wang, Weiwei and Nie, Yan and Tung, Wing-Tai and Ma, Nan and Lendlein, Andreas},
  title     = {Dedifferentiation of mature adipocytes with periodic exposure to cold},
  series = {Clinical hemorheology and microcirculation : blood flow and vessels},
  volume    = {71},
  journal   = {Clinical hemorheology and microcirculation : blood flow and vessels},
  number    = {4},
  publisher = {IOS Press},
  address   = {Amsterdam},
  issn      = {1386-0291},
  doi       = {10.3233/CH-199005},
  pages     = {415 -- 424},
  year      = {2019},
  abstract  = {Lipid-containing adipocytes can dedifferentiate into fibroblast-like cells under appropriate culture conditions, which are known as dedifferentiated fat (DFAT) cells. However, the relative low dedifferentiation efficiency with the established protocols limit their widespread applications. In this study, we found that adipocyte dedifferentiation could be promoted via periodic exposure to cold (10 degrees C) in vitro. The lipid droplets in mature adipocytes were reduced by culturing the cells in periodic cooling/heating cycles (10-37 degrees C) for one week. The periodic temperature change led to the down-regulation of the adipogenic genes (FABP4, Leptin) and up-regulation of the mitochondrial uncoupling related genes (UCP1, PGC-1 alpha, and PRDM16). In addition, the enhanced expression of the cell proliferation marker Ki67 was observed in the dedifferentiated fibroblast-like cells after periodic exposure to cold, as compared to the cells cultured in 37 degrees C. Our in vitro model provides a simple and effective approach to promote lipolysis and can be used to improve the dedifferentiation efficiency of adipocytes towards multipotent DFAT cells.},
  language  = {en}
}
@article{BrunacciNeffeWischkeetal.2019,
  author    = {Brunacci, Nadia and Neffe, Axel T. and Wischke, Christian and Naolou, Toufik and N{\"o}chel, Ulrich and Lendlein, Andreas},
  title     = {Oligodepsipeptide (nano)carriers},
  series = {Journal of controlled release},
  volume    = {301},
  journal   = {Journal of controlled release},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0168-3659},
  doi       = {10.1016/j.jconrel.2019.03.004},
  pages     = {146 -- 156},
  year      = {2019},
  abstract  = {High drug loads of nanoparticles are essential to efficiently provide a desired dosage in the required timeframe, however, these conditions may not be reached with so far established degradable matrices. Our conceptual approach for increasing the drug load is based on strengthening the affinity between drug and matrix in combination with stabilizing drug-matrix-hybrids through strong intermolecular matrix interactions. Here, a method for designing such complex drug-matrix hybrids is introduced employing computational methods (molecular dynamics and docking) as well as experimental studies (affinity, drug loading and distribution, drug release from films and nanoparticles). As model system, dexamethasone (DXM), relevant for the treatment of inflammatory diseases, in combination with poly[(rac-lactide)-co-glycolide] (PLGA) as standard degradable matrix or oligo[(3-(S)-sec-butyl) morpholine-2,5-dione] diol (OBMD) as matrix with hypothesized stronger interaction with DXM were investigated. Docking studies predicted higher affinity of DXM to OBMD than PLGA and displayed amide bond participation in hydrogen bonding with OBMD. Experimental investigations on films and nanoparticles, i.e. matrices of different shapes and sizes, confirmed this phenomenon as shown e.g. by a similar to 10 times higher solid state solubility of DXM in OBMD than in PLGA. DXM-loaded particles of similar to 150 nm prepared by nanoprecipitation in aqueous environment had a drug loading (DL) up to 16 times higher when employing OBMD as matrix compared to PLGA carriers due to enhanced drug retention in the OBMD phase. Importantly, drug relase periods were not altered as the release from films and particles was mainly ruled by the diffusion length as well as matrix degradation rather than the matrix type, which can be assigned to water diffusing into the matrix and breaking up of drug-matrix hydrogen bonds. Overall, the presented design and fabrication scheme showed predictive power and might universally enable the screening of drug/matrix interactions particularly to expand the oligodepsipeptide platform technology, e.g. by varying the depsipeptide side chains, for drug carrier and release systems.},
  language  = {en}
}
@misc{BrauneLatourReinthaleretal.2019,
  author    = {Braune, Steffen and Latour, Robert A. and Reinthaler, Markus and Landmesser, Ulf and Lendlein, Andreas and Jung, Friedrich},
  title     = {In Vitro Thrombogenicity Testing of Biomaterials},
  series = {Advanced healthcare materials},
  volume    = {8},
  journal   = {Advanced healthcare materials},
  number    = {21},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {2192-2640},
  doi       = {10.1002/adhm.201900527},
  pages     = {17},
  year      = {2019},
  abstract  = {The short- and long-term thrombogenicity of implant materials is still unpredictable, which is a significant challenge for the treatment of cardiovascular diseases. A knowledge-based approach for implementing biofunctions in materials requires a detailed understanding of the medical device in the biological system. In particular, the interplay between material and blood components/cells as well as standardized and commonly acknowledged in vitro test methods allowing a reproducible categorization of the material thrombogenicity requires further attention. Here, the status of in vitro thrombogenicity testing methods for biomaterials is reviewed, particularly taking in view the preparation of test materials and references, the selection and characterization of donors and blood samples, the prerequisites for reproducible approaches and applied test systems. Recent joint approaches in finding common standards for a reproducible testing are summarized and perspectives for a more disease oriented in vitro thrombogenicity testing are discussed.},
  language  = {en}
}
@article{BhuvaneshMachatschekLysyakovaetal.2019,
  author    = {Bhuvanesh, Thanga and Machatschek, Rainhard Gabriel and Lysyakova, Liudmila and Kratz, Karl and Schulz, Burkhard and Ma, Nan and Lendlein, Andreas},
  title     = {Collagen type-IV Langmuir and Langmuir-Schafer layers as model biointerfaces to direct stem cell adhesion},
  series = {Biomedical materials : materials for tissue engineering and regenerative medicine},
  volume    = {14},
  journal   = {Biomedical materials : materials for tissue engineering and regenerative medicine},
  number    = {2},
  publisher = {Inst. of Physics Publ.},
  address   = {Bristol},
  issn      = {1748-6041},
  doi       = {10.1088/1748-605X/aaf464},
  pages     = {17},
  year      = {2019},
  abstract  = {In biomaterial development, the design of material surfaces that mimic the extra-cellular matrix (ECM) in order to achieve favorable cellular instruction is rather challenging. Collagen-type IV (Col-IV), the major scaffolding component of Basement Membranes (BM), a specialized ECM with multiple biological functions, has the propensity to form networks by self-assembly and supports adhesion of cells such as endothelial cells or stem cells. The preparation of biomimetic Col-IV network-like layers to direct cell responses is difficult. We hypothesize that the morphology of the layer, and especially the density of the available adhesion sites, regulates the cellular adhesion to the layer. The Langmuir monolayer technique allows for preparation of thin layers with precisely controlled packing density at the air-water (A-W) interface. Transferring these layers onto cell culture substrates using the Langmuir-Schafer (LS) technique should therefore provide a pathway for preparation of BM mimicking layers with controlled cell adherence properties. In situ characterization using ellipsometry and polarization modulation-infrared reflection absorption spectroscopy of Col-IV layer during compression at the A-W interface reveal that there is linear increase of surface molecule concentration with negligible orientational changes up to a surface pressure of 25 mN m(-1). Smooth and homogeneous Col-IV network-like layers are successfully transferred by LS method at 15 mN m(-1) onto poly(ethylene terephthalate) (PET), which is a common substrate for cell culture. In contrast, the organization of Col-IV on PET prepared by the traditionally employed solution deposition method results in rather inhomogeneous layers with the appearance of aggregates and multilayers. Progressive increase in the number of early adherent mesenchymal stem cells (MSCs) after 24 h by controlling the areal Col-IV density by LS transfer at 10, 15 and 20 mN m(-1) on PET is shown. The LS method offers the possibility to control protein characteristics on biomaterial surfaces such as molecular density and thereby, modulate cell responses.},
  language  = {en}
}
@article{BalkBehlLendlein2019,
  author    = {Balk, Maria and Behl, Marc and Lendlein, Andreas},
  title     = {Quadruple-shape hydrogels},
  series = {Smart materials and structures},
  volume    = {28},
  journal   = {Smart materials and structures},
  number    = {5},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0964-1726},
  doi       = {10.1088/1361-665X/ab0e91},
  pages     = {10},
  year      = {2019},
  abstract  = {The capability of directed movements by two subsequent shape changes could be implemented in shape-memory hydrogels by incorporation of two types of crystallizable side chains While in non-swollen polymer networks even more directed movements could be realized, the creation of multi-shape hydrogels is still a challenge. We hypothesize that a quadruple-shape effect in hydrogels can be realized, when a swelling capacity almost independent of temperature is generated, whereby directed movements could be enabled, which are not related to swelling. In this case, entropy elastic recovery could be realized by hydrophilic segments and the fixation of different macroscopic shapes by means of three semi-crystalline side chains generating temporary crosslinks. Monomethacrylated semi-crystalline oligomers were connected as side chains in a hydrophilic polymer network via radical copolymerization. Computer assisted modelling was utilized to design a demonstrator capable of complex shape shifts by creating a casting mold via 3D printing from polyvinyl alcohol. The demonstrator was obtained after copolymerization of polymer network forming components within the mold, which was subsequently dissolved in water. A thermally-induced quadruple-shape effect was realized after equilibrium swelling of the polymer network in water. Three directed movements were successfully obtained when the temperature was continuously increased from 5 degrees C to 90 degrees C with a recovery ratio of the original shape above 90\%. Hence, a thermally-induced quadruple-shape effect as new record for hydrogels was realized. Here, the temperature range for the multi-shape effect was limited by water as swelling media (0 degrees C-100 degrees C), simultaneously distinctly separated thermal transitions were required, and the overall elasticity indispensable for successive deformations was reduced as result of partially chain segment orientation induced by swelling in water. Conclusively the challenges for penta- or hexa-shape gels are the design of systems enabling higher elastic deformability and covering a larger temperature range by switching to a different solvent.},
  language  = {en}
}
@article{BalkBehlLendlein2019,
  author    = {Balk, Maria and Behl, Marc and Lendlein, Andreas},
  title     = {Hydrolytic Degradation of Actuators Based on Copolymer Networks From Oligo(epsilon-caprolactone) Dimethacrylate and n-Butyl Acrylate},
  series = {MRS advances},
  volume    = {4},
  journal   = {MRS advances},
  number    = {21},
  publisher = {Cambridge Univ. Press},
  address   = {New York},
  issn      = {2059-8521},
  doi       = {10.1557/adv.2019.202},
  pages     = {1193 -- 1205},
  year      = {2019},
  abstract  = {Shape-memory polymer actuators often contain crystallizable polyester segments. Here, the influence of accelerated hydrolytic degradation on the actuation performance in copolymer networks based on oligo(epsilon-caprolactone) dimethacrylate (OCL) and n-butyl acrylate is studied The semi-crystalline OCL was utilized as crosslinker with molecular weights of 2.3 and 15.2 kg.mol(-1) (ratio: 1:1 wt\%) and n-butyl acrylate (25 wt\% relative to OCL content) acted as softening agent creating the polymer main chain segments within the network architecture. The copolymer networks were programmed by 50\% elongation and were degraded by means of alkaline hydrolysis utilizing sodium hydroxide solution (pH = 13). Experiments were performed in the range of the broad melting range of the actuators at 40 degrees C. The degradation of test specimen was monitored by the sample mass, which was reduced by 25 wt\% within 105 d .45 degradation products, fragments of OCL with molecular masses ranging from 400 to 50.000 g.mol(-1) could be detected by NMR spectroscopy and GPC measurements. The cleavage of ester groups included in OCL segments resulted in a decrease of the melting temperature (T-m) related to the actuator domains (amorphous at the temperature of degradation) and simultaneously, the T-m associated to the skeleton domain was increased (semi-crystalline at the temperature of degradation). The alkaline hydrolysis decreased the polymer chain orientation of OCL domains until a random alignment of crystalline domains was obtained. This result was confirmed by cyclic thermomechanical actuation tests. The performance of directed movements decreased almost linearly as function of degradation time resulting in the loss of functionality when the orientation of polymer chains disappeared. Here, actuators were able to provide reversible movements until 91 d when the accelerated bulk degradation procedure using alkaline hydrolysis (pH = 13) was applied. Accordingly, a lifetime of more than one year can be guaranteed under physiological conditions (pH = 7.4) when, e.g., artificial muscles for biomimetic robots as potential application for these kind of shape-memory polymer actuators will be addressed.},
  language  = {en}
}