@article{KrstulovićRosaBiedermannetal.2021, author = {Krstulović, Marija and Rosa, Angelika D. and Biedermann, Nicole and Irifune, Tetsuo and Wilke, Max}, title = {Structural changes in aluminosilicate glasses up to 164 GPa and the role of alkali, alkaline earth cations and alumina in the densification mechanism}, series = {Chemical geology : official journal of the European Association for Geochemistry}, volume = {560}, journal = {Chemical geology : official journal of the European Association for Geochemistry}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0009-2541}, doi = {10.1016/j.chemgeo.2020.119980}, pages = {14}, year = {2021}, abstract = {Pressure induced structural changes in silicate melts have a great impact on their physico-chemical properties and hence on their behaviour in the deep Earth's interior. In order to gain a deeper understanding we have studied the densification mechanism in multicomponent aluminosilicate glasses (albitic and albit-diopside composition) by means of extended X-ray absorption fine structure spectroscopy coupled to a diamond anvil cell up to 164 GPa. We have monitored the structural modifications from the network-former Ge as well as the network-modifier Sr. Notably, we tracked the evolution of Ge-O and Sr-O bond lengths (RGe-O, RSr-O) and their coordination number with pressure. We show that RGe-O increases strongly up to about 32 GPa, whereas RSr-O increases only slightly up to similar to 26 GPa. We assign these extensions to the increase of the coordination number from 4 to 6 (Ge) and from similar to 6 to at least 9 (Sr). Upon further compression RGe-O and RSr-O exhibit a continuous decrease to the highest probed pressure. These bond contractions, notably of RGe-O, that are continuous and exceed the one observed in pure SiO2 and GeO2, reflect a higher structural flexibility of multi-component glasses compared to those simple systems. Particularly, the high fraction of non-bridging oxygen atoms due to the presence of Na, Sr, Ca, Mg in the studied glasses, favours the simple compression of the highly-coordinated polyhedra of Si and Ge at pressure greater than 30 GPa. This is in strong contrast to pure oxides where cation polyhedral distortions govern the densification mechanism of the glass. The results of this study demonstrate that low field-strength alkali and alkaline earth cations, ubiquitous in deep Earth's melts, have a profound influence on the densification mechanism of glasses. Our results provide important constrains for interpreting the observed low velocity anomalies at the Earth's core-mantle boundary that have been, beyond others, referred to the presence of high-density melts. The hypothesis that non-buoyant melts at the Earth's core-mantle boundary can be formed by peculiar structural transformations in melts leading to higher coordination numbers compared to their crystalline equivalents is not supported from the present observations. The present results rather suggest that if velocity anomalies are to be explained by melts, these likely have considerable differences in chemical composition to the surrounding crystalline phase assemblage.}, language = {en} } @article{SchultzeWirthWunderetal.2021, author = {Schultze, Dina and Wirth, Richard and Wunder, Bernd and Loges, Anselm and Wilke, Max and Franz, Gerhard}, title = {Corundum-quartz metastability}, series = {Contributions to mineralogy and petrology}, volume = {176}, journal = {Contributions to mineralogy and petrology}, number = {4}, publisher = {Springer}, address = {Berlin ; Heidelberg}, issn = {0010-7999}, doi = {10.1007/s00410-021-01786-5}, pages = {13}, year = {2021}, abstract = {The metastable paragenesis of corundum and quartz is rare in nature but common in laboratory experiments where according to thermodynamic predictions aluminum-silicate polymorphs should form. We demonstrate here that the existence of a hydrous, silicon-bearing, nanometer-thick layer (called "HSNL") on the corundum surface can explain this metastability in experimental studies without invoking unspecific kinetic inhibition. We investigated experimentally formed corundum reaction products synthesized during hydrothermal and piston-cylinder experiments at 500-800 degrees C and 0.25-1.8 GPa and found that this HSNL formed inside and on the corundum crystals, thereby controlling the growth behavior of its host. The HSNL represents a substitution of Al with Si and H along the basal plane of corundum. Along the interface of corundum and quartz, the HSNL effectively isolates the bulk phases corundum and quartz from each other, thus apparently preventing their reaction to the stable aluminum silicate. High temperatures and prolonged experimental duration lead to recrystallization of corundum including the HSNL and to the formation of quartz + fluid inclusions inside the host crystal. This process reduces the phase boundary area between the bulk phases, thereby providing further opportunity to expand their coexistence. In addition to its small size, its transient nature makes it difficult to detect the HSNL in experiments and even more so in natural samples. Our findings emphasize the potential impact of nanometer-sized phases on geochemical reaction pathways and kinetics under metamorphic conditions in one of the most important chemical systems of the Earth's crust.}, language = {en} } @article{KlemmeFeldhausPotapkinetal.2021, author = {Klemme, Stephan and Feldhaus, Michael and Potapkin, Vasily and Wilke, Max and Borchert, Manuela and Louvel, Marion and Loges, Anselm and Rohrbach, Arno and Weitkamp, Petra and Welter, Edmund and Kokh, Maria A. and Schmidt, Christian and Testemale, Denis}, title = {A hydrothermal apparatus for x-ray absorption spectroscopy of hydrothermal fluids at DESY}, series = {Review of scientific instruments : a monthly journal devoted to scientific instruments, apparatus, and techniques}, volume = {92}, journal = {Review of scientific instruments : a monthly journal devoted to scientific instruments, apparatus, and techniques}, number = {6}, publisher = {AIP Publishing}, address = {Melville}, issn = {0034-6748}, doi = {10.1063/5.0044767}, pages = {6}, year = {2021}, abstract = {We present a new autoclave that enables in situ characterization of hydrothermal fluids at high pressures and high temperatures at synchrotron x-ray radiation sources. The autoclave has been specifically designed to enable x-ray absorption spectroscopy in fluids with applications to mineral solubility and element speciation analysis in hydrothermal fluids in complex compositions. However, other applications, such as Raman spectroscopy, in high-pressure fluids are also possible with the autoclave. First experiments were run at pressures between 100 and 600 bars and at temperatures between 25 degrees C and 550 degrees C, and preliminary results on scheelite dissolution in fluids of different compositions show that the autoclave is well suited to study the behavior of ore-forming metals at P-T conditions relevant to the Earth's crust.}, language = {en} } @article{SirbescuSchmidtVeksleretal.2017, author = {Sirbescu, Mona-Liza C. and Schmidt, Christian and Veksler, Ilya V. and Whittington, Alan G. and Wilke, Max}, title = {Experimental crystallization of undercooled felsic liquids}, series = {Journal of petrology}, volume = {58}, journal = {Journal of petrology}, number = {3}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0022-3530}, doi = {10.1093/petrology/egx027}, pages = {539 -- 568}, year = {2017}, abstract = {The crystallization kinetics of silicate liquids were studied experimentally in the system haplogranite-B-Li-H2O, at variable degrees of undercooling and variable water concentration. We investigated the kinetics of nucleation and crystallization of unseeded synthetic hydrous haplogranite with 1 wt \% Li2O + 2 center dot 3 wt \% B2O3 added (composition C1) and 2 wt \% Li2O + 4 center dot 6 wt \% B2O3 added (composition C2). Compositions C1 and C2 are simplified representative bulk compositions of Li-rich pegmatites and their highly differentiated cores, respectively. Starting water contents varied between 3 and 9 wt \%. With few exceptions, the system remained water-undersaturated. About 86 isothermal runs of 1-60 days duration, grouped in 25 time series of constant temperature and initial H2O content, were carried out at temperatures from 400 to 700A degrees C at 300 MPa, corresponding to variable degrees of undercooling between the liquidus and glass transition. Viscosity measurements indicate that the glass transition for both compositions is below 400A degrees C for 3 wt \% water and below 300A degrees C for 6 center dot 5 wt \% water. The melts remained virtually crystal free at 400A degrees C, about 100A degrees C and 120A degrees C above the glass transition for compositions C1 and C2, respectively, in experiments up to 30 days long. This result is consistent with the existence of low-temperature, undercooled melts in the crust. At lower values of undercooling the runs crystallized partially, up to about 70\% volume fraction. Undercooling and the amount of water are the main factors controlling nucleation and growth rates, and therefore textures. Minerals nucleate and grow sequentially according to mineral-specific nucleation delays. The mineral assemblage started with Li-Al stuffed quartz (in C1) and virgilite (in C2), solid-solutions between quartz and gamma-spodumene. The quartz-like phases were typically followed by spherulitic alkali feldspar-quartz intergrowths, euhedral petalite, and fine-grained muscovite. Nearly pure quartz formed as rims and replacement of metastable virgilite and stuffed quartz, in particular at the boron- and water-rich crystallization front of large feldspar or petalite. With the exception of muscovite, all minerals nucleated heterogeneously, on the capsule wall or on pre-existing minerals, and grew inwards, towards the capsule center. Experimental textures resembled the textures of zoned pegmatites, including skeletal, graphic, unidirectional, radiating, spherulitic, massive, and replacement textures. In some cases, when fluid saturation was reached, miarolitic cavities developed containing euhedral crystals. Although unidirectional growth rates appeared to slow down in time, volumetric rates for stable graphic alkali-feldspar quartz intergrowths and petalite remained constant for up to 60 days and similar to 70\% crystallization. Metastable stuffed quartz and virgilite diminished in their growth rates in runs of 30 days or longer, were resorbed in the melt, and were partially replaced by second-generation quartz. Unobstructed, self-sustained crystal growth in conditions of very low nucleation density appears to be the dominant mechanism to form giant pegmatitic crystals, although experimental growth rates are much slower than predicted in nature based on conductive-cooling models.}, language = {en} } @article{Wilke2018, author = {Wilke, Max}, title = {X-Ray Absorption Spectroscopy Measurements}, series = {Magmas Under Pressure : Advances in High-Pressure Experiments on Structure and Properties of Melts}, journal = {Magmas Under Pressure : Advances in High-Pressure Experiments on Structure and Properties of Melts}, publisher = {Elsevier}, address = {Amsterdam}, isbn = {978-0-12-811274-8}, doi = {10.1016/B978-0-12-811301-1.00006-X}, pages = {155 -- 178}, year = {2018}, abstract = {An overview is given on the current state of X-ray absorption measurements on silicate melts and glasses. The challenges, limitations, and achievements of analyzing X-ray absorption spectra measured in liquids to determine structural properties of major and minor elements in magmas are described, with particular focus on describing non-Gaussian pair distribution functions in highly disordered glasses and melts, measured at in situ conditions. This includes a discussion on the progress of combining experiments with data from molecular dynamics simulations. For the measurements at conditions of the deep Earth, various experimental approaches and necessities are discussed and two examples are described in more detail. Finally, the achievements and prospects are presented for measuring X-ray absorption spectra indirectly by X-ray Raman scattering.}, language = {en} } @article{KutzschbachGuttmannMarquardtetal.2018, author = {Kutzschbach, Martin and Guttmann, Peter and Marquardt, K. and Werner, S. and Henzler, K. D. and Wilke, Max}, title = {A transmission x-ray microscopy and NEXAFS approach for studying corroded silicate glasses at the nanometre scale}, series = {European journal of glass science and technology / Deutsche Glastechnische Gesellschaft (DGG) and the Society of Glass Technology (SGT). B, Physics and chemistry of glasses}, volume = {59}, journal = {European journal of glass science and technology / Deutsche Glastechnische Gesellschaft (DGG) and the Society of Glass Technology (SGT). B, Physics and chemistry of glasses}, number = {1}, publisher = {Society of Glass Technology}, address = {Sheffield}, issn = {1753-3562}, doi = {10.13036/17533562.59.1.043}, pages = {11 -- 26}, year = {2018}, abstract = {In this study transmission X-ray microscopy (TXM) was tested as a method to investigate the chemistry and structure of corroded silicate glasses at the nanometer scale. Three different silicate glasses were altered in static corrosion experiments for 1-336 hours at temperatures between 60 degrees C and 85 degrees C using a 25\% HCl solution. Thin lamellas were cut perpendicular to the surface of corroded glass monoliths and were analysed with conventional TEM as well as with TXM. By recording optical density profiles at photon energies around the Na and O K-edges, the shape of the corrosion rim/pristine glass interfaces and the thickness of the corrosion rims has been determined. Na and O near-edge X-ray absorption fine-structure spectra (NEXAFS) were obtained without inducing irradiation damage and have been used to detect chemical changes in the corrosion rims. Spatially resolved NEXAFS spectra at the O K-edge provided insight to structural changes in the corrosion layer on the atomic scale. By comparison to O K-edge spectra of silicate minerals and (hydrous) albite glass as well as to O K-edge NEXAFS of model structures simulated with ab initio calculations, evidence is provided that changes of the fine structure at the O K-edge are assigned to the formation of siloxane groups in the corrosion rim.}, language = {en} } @article{DietrichBehrensWilke2018, author = {Dietrich, Marcel and Behrens, Harald and Wilke, Max}, title = {A new optical cell for in situ Raman spectroscopy, and its application to study sulfur-bearing fluids at elevated pressures and temperatures}, series = {American mineralogist : an international journal of earth and planetary materials}, volume = {103}, journal = {American mineralogist : an international journal of earth and planetary materials}, number = {3}, publisher = {Mineralogical Society of America}, address = {Chantilly}, issn = {0003-004X}, doi = {10.2138/am-2018-6244}, pages = {418 -- 429}, year = {2018}, abstract = {Sulfur is an important component in volcanic gases at the Earth surface but also present in the deep Earth in hydrothermal or magmatic fluids. Little is known about the evolution of such fluids during ascent in the crust. A new optical cell was developed for in situ Raman spectroscopic investigations on fluids allowing abrupt or continuous changes of pressure up to 200 MPa at temperatures up to 750 degrees C. The concept is based on a flexible gold bellow, which separates the sample fluid from the pressure medium water. To avoid reactions between aggressive fluids and the pressure cell, steel components in contact with the fluid are shielded by gold foil. The cell was tested to study redox reactions in fluids using aqueous ammonium sulfate solutions as a model system. During heating at constant pressure of 130 MPa, sulfate ions transform first to HSO4- ions and then to molecular units such as H2SO4. Variation of pressure shows that the stability of sulfate species relies on fluid density, i.e., highly charged species are stable only in high-density fluids. Partial decomposition of ammonium was evident above 550 degrees C by the occurrence of a nitrogen peak in the Raman spectra. Reduced sulfur species were observed above 700 degrees C by Raman signals near 2590 cm(-1) assigned to HS- and H2S. No clear evidence for the formation of sulfur dioxide was found in contrary to previous studies on aqueous H2SO4, suggesting very reducing conditions in our experiments. Fluid-mineral interaction was studied by inserting into the cell a small, semi-open capsule filled with a mixture of pyrite and pyrrhotite. Oxidation of the sample assembly was evident by transformation of pyrite to pyrrhotite. As a consequence, sulfide species were observed in the fluid already at temperatures of similar to 600 degrees C.}, language = {en} } @article{NunezValdezEfthimiopoulosTaranetal.2018, author = {Nunez Valdez, Maribel and Efthimiopoulos, Ilias and Taran, Michail and Mueller, Jan and Bykova, Elena and McCammon, Catherine and Koch-M{\"u}ller, Monika and Wilke, Max}, title = {Evidence for a pressure-induced spin transition in olivine-type LiFePO4 triphylite}, series = {Physical review : B, Condensed matter and materials physics}, volume = {97}, journal = {Physical review : B, Condensed matter and materials physics}, number = {18}, publisher = {American Physical Society}, address = {College Park}, issn = {2469-9950}, doi = {10.1103/PhysRevB.97.184405}, pages = {9}, year = {2018}, abstract = {We present a combination of first-principles and experimental results regarding the structural and magnetic properties of olivine-type LiFePO4 under pressure. Our investigations indicate that the starting Pbnm phase of LiFePO4 persists up to 70 GPa. Further compression leads to an isostructural transition in the pressure range of 70-75 GPa, inconsistent with a former theoretical study. Considering our first-principles prediction for a high-spin to low-spin transition of Fe2+ close to 72 GPa, we attribute the experimentally observed isostructural transition to a change in the spin state of Fe2+ in LiFePO4. Compared to relevant Fe-bearing minerals, LiFePO4 exhibits the largest onset pressure for a pressure-induced spin state transition.}, language = {en} } @article{PohlenzRosaMathonetal.2018, author = {Pohlenz, Julia and Rosa, A. D. and Mathon, O. and Pascarelli, S. and Belin, S. and Landrot, G. and Murzin, V. and Veligzhanin, A. and Shiryaev, A. and Irifune, T. and Wilke, Max}, title = {Structural controls of CO2 on Y, La and Sr incorporation in sodium-rich silicate - carbonate melts by in-situ high P-T EXAFS}, series = {Chemical geology : official journal of the European Association for Geochemistry}, volume = {486}, journal = {Chemical geology : official journal of the European Association for Geochemistry}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0009-2541}, doi = {10.1016/j.chemgeo.2017.12.023}, pages = {1 -- 15}, year = {2018}, abstract = {Carbonate-rich silicate and carbonate melts play a crucial role in deep Earth magmatic processes and their melt structure is a key parameter, as it controls physical and transport properties. Carbon-rich melts can be strongly enriched in trace elements, but the structural incorporation mechanisms of these elements are difficult to study because such melts generally cannot be quenched to glasses. In this contribution we investigate the influence of CO2 on the local environments of trace elements contained in silicate glasses with variable CO2 concentrations and in silicate and carbonate melts. The melts were studied in-situ at high pressure and temperature conditions using the Paris-Edinburgh press (2.2 to 2.6 GPa and 1200 to 1500 degrees C). The compositions studied include sodium-rich peralkaline silicate melts and glasses and carbonate melts similar to those occurring naturally at Oldoinyo Lengai volcano. The local environments of yttrium (Y), lanthanum (La) and strontium (Sr) were investigated using extended X-ray absorption fine structure (EXAFS) spectroscopy. Main findings of the study suggest: (1) In peralkaline silicate glasses the local structure of Y is unaffected by the CO2 content. Contrary, a slight increase of oxygen bond lengths of Sr and La is inferred with increasing CO2 content in peralkaline glasses, while they remain constant in glasses of even higher peralkalinity independent of the CO2 content. (2) In silicate melts of different CO2 contents Y-O bond lengths are constant, while a slight increase within carbonate melt compositions is deduced. On the other hand, a steady bond lengths increase over the whole compositional range is inferred for La-O and Sr-O. This may well be explained by distinct preferences of these elements for specific local environments. Based on these new data, we suggest potential mechanisms for the structural incorporation of these elements, a key step towards understanding their partitioning behavior in natural magmatic systems.}, language = {en} } @misc{CaupinHoltenQiuetal.2018, author = {Caupin, Frederic and Holten, Vincent and Qiu, Chen and Guillerm, Emmanuel and Wilke, Max and Frenz, Martin and Teixeira, Jose and Soper, Alan K.}, title = {Comment on "Maxima in the thermodynamic response and correlation functions of deeply supercooled water"}, series = {Science}, volume = {360}, journal = {Science}, number = {6390}, publisher = {American Assoc. for the Advancement of Science}, address = {Washington}, issn = {0036-8075}, doi = {10.1126/science.aat1634}, pages = {2}, year = {2018}, abstract = {Kim et al. recently measured the structure factor of deeply supercooled water droplets (Reports, 22 December 2017, p. 1589). We raise several concerns about their data analysis and interpretation. In our opinion, the reported data do not lead to clear conclusions about the origins of water's anomalies.}, language = {en} }