@misc{EggertRawelPawelzik2011,
  author    = {Eggert, Kai and Rawel, Harshadrai Manilal and Pawelzik, Elke},
  title     = {In vitro degradation of wheat gluten fractions by Fusarium graminearum proteases},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  number    = {877},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43510},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435102},
  pages     = {697 -- 705},
  year      = {2011},
  abstract  = {Fusarium spp. infection of cereal grain is a common problem, which leads to a dramatic loss of grain quality. The aim of the present study was to investigate the effect of Fusarium infection on the wheat storage protein gluten and its fractions, the gliadins and glutenins, in an in vitro model system. Gluten proteins were digested by F. graminearum proteases for 2, 4, 8 and 24 h, separated by Osborne fractionation and characterised by chromatographic (RP-HPLC) and electrophoretic analysis (SDS-Page). Gluten digestion by F. graminearum proteases showed in comparison with gliadins a preference for the glutenins whereas the HMW subfraction was at most affected. In comparison with a untreated control, the HMW subfraction was degraded of about 97\% after 4 h incubation with Fusarium proteases. Separate digestion of gliadin and glutenin underlined the preference for HMW-GS. Analogue to the observed change in the gluten composition, the yield of the proteins extracted changed. A higher amount of glutenin fragments was found in the gliadin extraction solution after digestion and could mask a gliadin destruction at the same time. This observation can contribute to explain the frequently reported reduced glutenin amount parallel to an increase in gliadin quantity after Fusarium infection in grains.},
  language  = {en}
}
@article{HaralampievMertensSchwarzeretal.2015,
  author    = {Haralampiev, Ivan and Mertens, Monique and Schwarzer, Roland and Herrmann, Andreas and Volkmer, Rudolf and Wessig, Pablo and Mueller, Peter},
  title     = {Recruitment of SH-Containing peptides to lipid and biological membranes through the use of a palmitic acid functionalized with a Maleimide Group},
  series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  volume    = {54},
  journal   = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  number    = {1},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1433-7851},
  doi       = {10.1002/anie.201408089},
  pages     = {323 -- 326},
  year      = {2015},
  abstract  = {This study presents a novel and easily applicable approach to recruit sulfhydryl-containing biomolecules to membranes by using a palmitic acid which is functionalized with a maleimide group. Notably, this strategy can also be employed with preformed (biological) membranes. The applicability of the assay is demonstrated by characterizing the binding of a Rhodamine-labeled peptide to lipid and cellular membranes using methods of fluorescence spectroscopy, lifetime measurement, and microscopy. Our approach offers new possibilities for preparing biologically active liposomes and manipulating living cells.},
  language  = {en}
}
@article{SeckerBrosnanLuxenhoferetal.2015,
  author    = {Secker, Christian and Brosnan, Sarah M. and Luxenhofer, Robert and Schlaad, Helmut},
  title     = {Poly(alpha-Peptoid)s Revisited: Synthesis, Properties, and Use as Biomaterial},
  series = {Macromolecular bioscience},
  volume    = {15},
  journal   = {Macromolecular bioscience},
  number    = {7},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1616-5187},
  doi       = {10.1002/mabi.201500023},
  pages     = {881 -- 891},
  year      = {2015},
  abstract  = {Polypeptoids have been of great interest in the polymer science community since the early half of the last century; however, they had been basically forgotten materials until the last decades in which they have enjoyed an exciting revival. In this mini-review, we focus on the recent developments in polypeptoid chemistry, with particular focus on polymers synthesized by the ring-opening polymerization (ROP) of amino acid N-carboxyanhydrides (NCAs). Specifically, we will review traditional monomer synthesis (such as Leuchs, Katchalski, and Kricheldorf) and recent advances in polymerization methods to yield both linear, cyclic, and functional polymers, solution and bulk thermal properties, and preliminary results on the use of polypeptoids as biomaterials (i.e immunogenicity, biodistribution, degradability, and drug delivery).},
  language  = {en}
}
@article{FedericoPiercePilusoetal.2015,
  author    = {Federico, Stefania and Pierce, Benjamin F. and Piluso, Susanna and Wischke, Christian and Lendlein, Andreas and Neffe, Axel T.},
  title     = {Design of Decorin-Based Peptides That Bind to CollagenI and their Potential as Adhesion Moieties in Biomaterials},
  series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  volume    = {54},
  journal   = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  number    = {37},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1433-7851},
  doi       = {10.1002/anie.201505227},
  pages     = {10980 -- 10984},
  year      = {2015},
  abstract  = {Mimicking the binding epitopes of protein-protein interactions by using small peptides is important for generating modular biomimetic systems. A strategy is described for the design of such bioactive peptides without accessible structural data for the targeted interaction, and the effect of incorporating such adhesion peptides in complex biomaterial systems is demonstrated. The highly repetitive structure of decorin was analyzed to identify peptides that are representative of the inner and outer surface, and it was shown that only peptides based on the inner surface of decorin bind to collagen. The peptide with the highest binding affinity for collagenI, LHERHLNNN, served to slow down the diffusion of a conjugated dye in a collagen gel, while its dimer could physically crosslink collagen, thereby enhancing the elastic modulus of the gel by one order of magnitude. These results show the potential of the identified peptides for the design of biomaterials for applications in regenerative medicine.},
  language  = {en}
}
@article{ReynaGonzalezSchmidPetrasetal.2016,
  author    = {Reyna-Gonz{\´a}lez, Emmanuel and Schmid, Bianca and Petras, Daniel and S{\"u}ssmuth, Roderich D. and Dittmann, Elke},
  title     = {Leader Peptide-Free In Vitro Reconstitution of Microviridin Biosynthesis Enables Design of Synthetic Protease-Targeted Libraries},
  series = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  volume    = {55},
  journal   = {Angewandte Chemie : a journal of the Gesellschaft Deutscher Chemiker ; International edition},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1433-7851},
  doi       = {10.1002/anie.201604345},
  pages     = {9398 -- 9401},
  year      = {2016},
  abstract  = {Microviridins are a family of ribosomally synthesized and post-translationally modified peptides with a highly unusual architecture featuring non-canonical lactone as well as lactam rings. Individual variants specifically inhibit different types of serine proteases. Here we have established an efficient in vitro reconstitution approach based on two ATP-grasp ligases that were constitutively activated using covalently attached leader peptides and a GNAT-type N-acetyltransferase. The method facilitates the efficient in vitro one-pot transformation of microviridin core peptides to mature microviridins. The engineering potential of the chemo-enzymatic technology was demonstrated for two synthetic peptide libraries that were used to screen and optimize microviridin variants targeting the serine proteases trypsin and subtilisin. Successive analysis of intermediates revealed distinct structure-activity relationships for respective target proteases.},
  language  = {en}
}
@article{FandrichBullerMemczaketal.2017,
  author    = {Fandrich, Artur and Buller, Jens and Memczak, Henry and Stoecklein, W. and Hinrichs, K. and Wischerhoff, E. and Schulz, B. and Laschewsky, Andr{\´e} and Lisdat, Fred},
  title     = {Responsive Polymer-Electrode Interface-Study of its Thermo- and pH-Sensitivity and the Influence of Peptide Coupling},
  series = {Electrochimica acta : the journal of the International Society of Electrochemistry (ISE)},
  volume    = {229},
  journal   = {Electrochimica acta : the journal of the International Society of Electrochemistry (ISE)},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0013-4686},
  doi       = {10.1016/j.electacta.2017.01.080},
  pages     = {325 -- 333},
  year      = {2017},
  abstract  = {This study introduces a thermally responsive, polymer-based electrode system. The key component is a surface-attached, temperature-responsive poly(oligoethylene glycol) methacrylate (poly(OEGMA)) type polymer bearing photoreactive benzophenone and carboxy groups containing side chains. The responsive behavior of the polymer in aqueous media has been investigated by turbidimetry measurements. Polymer films are formed on gold substrates by means of the photoreactive 2(dicyclohexylphosphino)benzophenone (DPBP) through photocrosslinking. The electrochemical behavior of the resulting polymer-substrate interface has been investigated in buffered [Fe(CN)6](3-)/[Fe (CN)6](4-)solutions at room temperature and under temperature variation by cyclic voltammetry (CV). The CV experiments show that with increasing temperature structural changes of the polymer layer occur, which alter the output of the electrochemical measurement. Repeated heating/cooling cycles analyzed by CV measurements and pH changes analyzed by quartz crystal microbalance with dissipation monitoring (QCM-D) reveal the reversible nature of the restructuring process. The immobilized films are further modified by covalent coupling of two small biomolecules - a hydrophobic peptide and a more hydrophilic one. These attached components influence the hydrophobicity of the layer in a different way the resulting change of the temperature-caused behavior has been studied by CV indicating a different state of the polymer after coupling of the hydrophobic peptide.},
  language  = {en}
}
@phdthesis{LopezGarcia2019,
  author    = {L{\´o}pez Garc{\´i}a, Patricia},
  title     = {Coiled coils as mechanical building blocks},
  doi       = {10.25932/publishup-42956},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-429568},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 130},
  year      = {2019},
  abstract  = {The natural abundance of Coiled Coil (CC) motifs in cytoskeleton and extracellular matrix proteins suggests that CCs play an important role as passive (structural) and active (regulatory) mechanical building blocks. CCs are self-assembled superhelical structures consisting of 2-7 α-helices. Self-assembly is driven by hydrophobic and ionic interactions, while the helix propensity of the individual helices contributes additional stability to the structure. As a direct result of this simple sequence-structure relationship, CCs serve as templates for protein design and sequences with a pre-defined thermodynamic stability have been synthesized de novo. Despite this quickly increasing knowledge and the vast number of possible CC applications, the mechanical function of CCs has been largely overlooked and little is known about how different CC design parameters determine the mechanical stability of CCs. Once available, this knowledge will open up new applications for CCs as nanomechanical building blocks, e.g. in biomaterials and nanobiotechnology. With the goal of shedding light on the sequence-structure-mechanics relationship of CCs, a well-characterized heterodimeric CC was utilized as a model system. The sequence of this model system was systematically modified to investigate how different design parameters affect the CC response when the force is applied to opposing termini in a shear geometry or separated in a zipper-like fashion from the same termini (unzip geometry). The force was applied using an atomic force microscope set-up and dynamic single-molecule force spectroscopy was performed to determine the rupture forces and energy landscape properties of the CC heterodimers under study. Using force as a denaturant, CC chain separation is initiated by helix uncoiling from the force application points. In the shear geometry, this allows uncoiling-assisted sliding parallel to the force vector or dissociation perpendicular to the force vector. Both competing processes involve the opening of stabilizing hydrophobic (and ionic) interactions. Also in the unzip geometry, helix uncoiling precedes the rupture of hydrophobic contacts. In a first series of experiments, the focus was placed on canonical modifications in the hydrophobic core and the helix propensity. Using the shear geometry, it was shown that both a reduced core packing and helix propensity lower the thermodynamic and mechanical stability of the CC; however, with different effects on the energy landscape of the system. A less tightly packed hydrophobic core increases the distance to the transition state, with only a small effect on the barrier height. This originates from a more dynamic and less tightly packed core, which provides more degrees of freedom to respond to the applied force in the direction of the force vector. In contrast, a reduced helix propensity decreases both the distance to the transition state and the barrier height. The helices are 'easier' to unfold and the remaining structure is less thermodynamically stable so that dissociation perpendicular to the force axis can occur at smaller deformations. Having elucidated how canonical sequence modifications influence CC mechanics, the pulling geometry was investigated in the next step. Using one and the same sequence, the force application points were exchanged and two different shear and one unzipping geometry were compared. It was shown that the pulling geometry determines the mechanical stability of the CC. Different rupture forces were observed in the different shear as well as in the unzipping geometries, suggesting that chain separation follows different pathways on the energy landscape. Whereas the difference between CC shearing and unzipping was anticipated and has also been observed for other biological structures, the observed difference for the two shear geometries was less expected. It can be explained with the structural asymmetry of the CC heterodimer. It is proposed that the direction of the α-helices, the different local helix propensities and the position of a polar asparagine in the hydrophobic core are responsible for the observed difference in the chain separation pathways. In combination, these factors are considered to influence the interplay between processes parallel and perpendicular to the force axis. To obtain more detailed insights into the role of helix stability, helical turns were reinforced locally using artificial constraints in the form of covalent and dynamic 'staples'. A covalent staple bridges to adjacent helical turns, thus protecting them against uncoiling. The staple was inserted directly at the point of force application in one helix or in the same terminus of the other helix, which did not experience the force directly. It was shown that preventing helix uncoiling at the point of force application reduces the distance to the transition state while slightly increasing the barrier height. This confirms that helix uncoiling is critically important for CC chain separation. When inserted into the second helix, this stabilizing effect is transferred across the hydrophobic core and protects the force-loaded turns against uncoiling. If both helices were stapled, no additional increase in mechanical stability was observed. When replacing the covalent staple with a dynamic metal-coordination bond, a smaller decrease in the distance to the transition was observed, suggesting that the staple opens up while the CC is under load. Using fluorinated amino acids as another type of non-natural modification, it was investigated how the enhanced hydrophobicity and the altered packing at the interface influences CC mechanics. The fluorinated amino acid was inserted into one central heptad of one or both α-helices. It was shown that this substitution destabilized the CC thermodynamically and mechanically. Specifically, the barrier height was decreased and the distance to the transition state increased. This suggests that a possible stabilizing effect of the increased hydrophobicity is overruled by a disturbed packing, which originates from a bad fit of the fluorinated amino acid into the local environment. This in turn increases the flexibility at the interface, as also observed for the hydrophobic core substitution described above. In combination, this confirms that the arrangement of the hydrophobic side chains is an additional crucial factor determining the mechanical stability of CCs. In conclusion, this work shows that knowledge of the thermodynamic stability alone is not sufficient to predict the mechanical stability of CCs. It is the interplay between helix propensity and hydrophobic core packing that defines the sequence-structure-mechanics relationship. In combination, both parameters determine the relative contribution of processes parallel and perpendicular to the force axis, i.e. helix uncoiling and uncoiling-assisted sliding as well as dissociation. This new mechanistic knowledge provides insight into the mechanical function of CCs in tissues and opens up the road for designing CCs with pre-defined mechanical properties. The library of mechanically characterized CCs developed in this work is a powerful starting point for a wide spectrum of applications, ranging from molecular force sensors to mechanosensitive crosslinks in protein nanostructures and synthetic extracellular matrix mimics.},
  language  = {en}
}
@article{VillatoroLealZuehlkeRiebeetal.2020,
  author    = {Villatoro Leal, Jos{\´e} Andr{\´e}s and Z{\"u}hlke, Martin and Riebe, Daniel and Beitz, Toralf and Weber, Marcus and L{\"o}hmannsr{\"o}ben, Hans-Gerd},
  title     = {Sub-ambient pressure IR-MALDI ion mobility spectrometer for the determination of low and high field mobilities},
  series = {Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica},
  volume    = {412},
  journal   = {Analytical and bioanalytical chemistry : a merger of Fresenius' journal of analytical chemistry, Analusis and Quimica analitica},
  number    = {22},
  publisher = {Springer},
  address   = {Heidelberg},
  issn      = {1618-2642},
  doi       = {10.1007/s00216-020-02735-0},
  pages     = {5247 -- 5260},
  year      = {2020},
  abstract  = {A new ion mobility (IM) spectrometer, enabling mobility measurements in the pressure range between 5 and 500 mbar and in the reduced field strength range E/N of 5-90 Td, was developed and characterized. Reduced mobility (K-0) values were studied under low E/N (constant value) as well as high E/N (deviation from low field K-0) for a series of molecular ions in nitrogen. Infrared matrix-assisted laser desorption ionization (IR-MALDI) was used in two configurations: a source working at atmospheric pressure (AP) and, for the first time, an IR-MALDI source working with a liquid (aqueous) matrix at sub-ambient/reduced pressure (RP). The influence of RP on IR-MALDI was examined and new insights into the dispersion process were gained. This enabled the optimization of the IM spectrometer for best analytical performance. While ion desolvation is less efficient at RP, the transport of ions is more efficient, leading to intensity enhancement and an increased number of oligomer ions. When deciding between AP and RP IR-MALDI, a trade-off between intensity and resolving power has to be considered. Here, the low field mobility of peptide ions was first measured and compared with reference values from ESI-IM spectrometry (at AP) as well as collision cross sections obtained from molecular dynamics simulations. The second application was the determination of the reduced mobility of various substituted ammonium ions as a function of E/N in nitrogen. The mobility is constant up to a threshold at high E/N. Beyond this threshold, mobility increases were observed. This behavior can be explained by the loss of hydrated water molecules.},
  language  = {en}
}
@article{WolffGastEversetal.2021,
  author    = {Wolff, Martin and Gast, Klaus and Evers, Andreas and Kurz, Michael and Pfeiffer-Marek, Stefania and Sch{\"u}ler, Anja and Seckler, Robert and Thalhammer, Anja},
  title     = {A Conserved Hydrophobic Moiety and Helix-Helix Interactions Drive the Self-Assembly of the Incretin Analog Exendin-4},
  series = {Biomolecules},
  volume    = {11},
  journal   = {Biomolecules},
  number    = {9},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2218-273X},
  doi       = {10.3390/biom11091305},
  pages     = {20},
  year      = {2021},
  abstract  = {Exendin-4 is a pharmaceutical peptide used in the control of insulin secretion. Structural information on exendin-4 and related peptides especially on the level of quaternary structure is scarce. We present the first published association equilibria of exendin-4 directly measured by static and dynamic light scattering. We show that exendin-4 oligomerization is pH dependent and that these oligomers are of low compactness. We relate our experimental results to a structural hypothesis to describe molecular details of exendin-4 oligomers. Discussion of the validity of this hypothesis is based on NMR, circular dichroism and fluorescence spectroscopy, and light scattering data on exendin-4 and a set of exendin-4 derived peptides. The essential forces driving oligomerization of exendin-4 are helix-helix interactions and interactions of a conserved hydrophobic moiety. Our structural hypothesis suggests that key interactions of exendin-4 monomers in the experimentally supported trimer take place between a defined helical segment and a hydrophobic triangle constituted by the Phe22 residues of the three monomeric subunits. Our data rationalize that Val19 might function as an anchor in the N-terminus of the interacting helix-region and that Trp25 is partially shielded in the oligomer by C-terminal amino acids of the same monomer. Our structural hypothesis suggests that the Trp25 residues do not interact with each other, but with C-terminal Pro residues of their own monomers.},
  language  = {en}
}
@misc{WolffGastEversetal.2021,
  author    = {Wolff, Martin and Gast, Klaus and Evers, Andreas and Kurz, Michael and Pfeiffer-Marek, Stefania and Sch{\"u}ler, Anja and Seckler, Robert and Thalhammer, Anja},
  title     = {A Conserved Hydrophobic Moiety and Helix-Helix Interactions Drive the Self-Assembly of the Incretin Analog Exendin-4},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {9},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52208},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-522081},
  pages     = {22},
  year      = {2021},
  abstract  = {Exendin-4 is a pharmaceutical peptide used in the control of insulin secretion. Structural information on exendin-4 and related peptides especially on the level of quaternary structure is scarce. We present the first published association equilibria of exendin-4 directly measured by static and dynamic light scattering. We show that exendin-4 oligomerization is pH dependent and that these oligomers are of low compactness. We relate our experimental results to a structural hypothesis to describe molecular details of exendin-4 oligomers. Discussion of the validity of this hypothesis is based on NMR, circular dichroism and fluorescence spectroscopy, and light scattering data on exendin-4 and a set of exendin-4 derived peptides. The essential forces driving oligomerization of exendin-4 are helix-helix interactions and interactions of a conserved hydrophobic moiety. Our structural hypothesis suggests that key interactions of exendin-4 monomers in the experimentally supported trimer take place between a defined helical segment and a hydrophobic triangle constituted by the Phe22 residues of the three monomeric subunits. Our data rationalize that Val19 might function as an anchor in the N-terminus of the interacting helix-region and that Trp25 is partially shielded in the oligomer by C-terminal amino acids of the same monomer. Our structural hypothesis suggests that the Trp25 residues do not interact with each other, but with C-terminal Pro residues of their own monomers.},
  language  = {en}
}