@phdthesis{Borghini2020,
  author    = {Borghini, Alessia},
  title     = {Melt inclusions in mafic rocks as witnesses of metasomatism in the Bohemian Massif},
  doi       = {10.25932/publishup-47363},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473639},
  school      = {Universit{\"a}t Potsdam},
  pages     = {205},
  year      = {2020},
  abstract  = {Orogenic peridotites represent portions of upper subcontinental mantle now incorporated in mountain belts. They often contain layers, lenses and irregular bodies of pyroxenite and eclogite. The origin of this heterogeneity and the nature of these layers is still debated but it is likely to involve processes such as transient melts coming from the crust or the mantle and segregating in magma conduits, crust-mantle interaction, upwelling of the asthenosphere and metasomatism. All these processes occur in the lithospheric mantle and are often related with the subduction of crustal rocks to mantle depths. In fact, during subduction, fluids and melts are released from the slab and can interact with the overlying mantle, making the study of deep melts in this environment crucial to understand mantle heterogeneity and crust-mantle interaction. The aim of this thesis is precisely to better constrain how such processes take place studying directly the melt trapped as primary inclusions in pyroxenites and eclogites. The Bohemian Massif, crystalline core of the Variscan belt, is targeted for these purposes because it contains orogenic peridotites with layers of pyroxenite and eclogite and other mafic rocks enclosed in felsic high pressure and ultra-high pressure crustal rocks. Within this Massif mafic rocks from two areas have been selected: the garnet clinopyroxenite in orogenic peridotite of the Granulitgebirge and the ultra-high pressure eclogite in the diamond-bearing gneisses of the Erzgebirge. In both areas primary melt inclusions were recognized in the garnet, ranging in size between 2-25 µm and with different degrees of crystallization, from glassy to polycrystalline. They have been investigated with Micro Raman spectroscopy and EDS mapping and the mineral assemblage is kumdykolite, phlogopite, quartz, kokchetavite, phase with a main Raman peak at 430 cm-1, phase with a main Raman peak at 412 cm-1, white mica and calcite with some variability in relative abundance depending on the case study. In the Granulitgebirge osumilite and pyroxene are also present, whereas calcite is one of the main phases in the Erzgebirge. The presence of glass and the mineral assemblage in the nanogranitoids suggest that they were former droplets of melt trapped in the garnet while it was growing. Glassy inclusions and re-homogenized nanogranitoids show a silicate melt that is granitic, hydrous, high in alkalis and weakly peraluminous. The melt is also enriched in both case studies in Cs, Pb, Rb, U, Th, Li and B suggesting the involvement of crustal component, i.e. white mica (main carrier of Cs, Pb, Rb, Li and B), and a fluid (Cs, Th and U) in the melt producing reaction. The whole rock in both cases mainly consists of garnet and clinopyroxene with, in Erzgebirge samples, the additional presence of quartz both in the matrix and as a polycrystalline inclusion in the garnet. The latter is interpreted as a quartz pseudomorph after coesite and occurs in the same microstructural position as the melt inclusions. Both rock types show a crustal and subduction zone signature with garnet and clinopyroxene in equilibrium. Melt was likely present during the metamorphic peak of the rock, as it occurs in garnet. Our data suggest that the processes most likely responsible for the formation of the investigated rocks in both areas is a metasomatic reaction between a melt produced in the crust and mafic layers formerly located in the mantle wedge for the Granulitgebirge and in the subducted continental crust itself in the Erzgebirge. Thus metasomatism in the first case took place in the mantle overlying the slab, whereas in the second case metasomatism took place in the continental crust that already contained, before subduction, mafic layers. Moreover, the presence of former coesite in the same microstructural position of the melt inclusions in the Erzgebirge garnets suggest that metasomatism took place at ultra-high pressure conditions. Summarizing, in this thesis we provide new insights into the geodynamic evolution of the Bohemian Massif based on the study of melt inclusions in garnet in two different mafic rock types, combining the direct microstructural and geochemical investigation of the inclusions with the whole-rock and mineral geochemistry. We report for the first time data, directly extracted from natural rocks, on the metasomatic melt responsible for the metasomatism of several areas of the Bohemian Massif. Besides the two locations here investigated, belonging to the Saxothuringian Zone, a signature similar to the investigated melt is clearly visible in pyroxenite and peridotite of the T-7 borehole (again Saxothuringian Zone) and the durbachite suite located in the Moldanubian Zone.},
  language  = {en}
}
@phdthesis{Senftleben2020,
  author    = {Senftleben, Robin},
  title     = {Earth's magnetic field over the last 1000 years},
  doi       = {10.25932/publishup-47315},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473150},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 104},
  year      = {2020},
  abstract  = {To investigate the reliability and stability of spherical harmonic models based on archeo/-paleomagnetic data, 2000 Geomagnetic models were calculated. All models are based on the same data set but with randomized uncertainties. Comparison of these models to the geomagnetic field model gufm1 showed that large scale magnetic field structures up to spherical harmonic degree 4 are stable throughout all models. Through a ranking of all models by comparing the dipole coefficients to gufm1 more realistic uncertainty estimates were derived than the authors of the data provide. The derived uncertainty estimates were used in further modelling, which combines archeo/-paleomagnetic and historical data. The huge difference in data count, accuracy and coverage of these two very different data sources made it necessary to introduce a time dependent spatial damping, which was constructed to constrain the spatial complexity of the model. Finally 501 models were calculated by considering that each data point is a Gaussian random variable, whose mean is the original value and whose standard deviation is its uncertainty. The final model arhimag1k is calculated by taking the mean of the 501 sets of Gauss coefficients. arhimag1k fits different dependent and independent data sets well. It shows an early reverse flux patch at the core-mantle boundary between 1000 AD and 1200 AD at the location of the South Atlantic Anomaly today. Another interesting feature is a high latitude flux patch over Greenland between 1200 and 1400 AD. The dipole moment shows a constant behaviour between 1600 and 1840 AD. In the second part of the thesis 4 new paleointensities from 4 different flows of the island Fogo, which is part of Cape Verde, are presented. The data is fitted well by arhimag1k with the exception of the value at 1663 of 28.3 microtesla, which is approximately 10 microtesla lower than the model suggest.},
  language  = {en}
}
@phdthesis{Angelopoulos2020,
  author    = {Angelopoulos, Michael},
  title     = {Mechanisms of sub-aquatic permafrost evolution in Arctic coastal environments},
  school      = {Universit{\"a}t Potsdam},
  pages     = {165},
  year      = {2020},
  abstract  = {Subsea permafrost is perennially cryotic earth material that lies offshore. Most submarine permafrost is relict terrestrial permafrost beneath the Arctic shelf seas, was inundated after the last glaciation, and has been warming and thawing ever since. It is a reservoir and confining layer for gas hydrates and has the potential to release greenhouse gases and affect global climate change. Furthermore, subsea permafrost thaw destabilizes coastal infrastructure. While numerous studies focus on its distribution and rate of thaw over glacial timescales, these studies have not been brought together and examined in their entirety to assess rates of thaw beneath the Arctic Ocean. In addition, there is still a large gap in our understanding of sub-aquatic permafrost processes on finer spatial and temporal scales. The degradation rate of subsea permafrost is influenced by the initial conditions upon submergence. Terrestrial permafrost that has already undergone warming, partial thawing or loss of ground ice may react differently to inundation by seawater compared to previously undisturbed ice-rich permafrost. Heat conduction models are sufficient to model the thaw of thick subsea permafrost from the bottom, but few studies have included salt diffusion for top-down chemical degradation in shallow waters characterized by mean annual cryotic conditions on the seabed. Simulating salt transport is critical for assessing degradation rates for recently inundated permafrost, which may accelerate in response to warming shelf waters, a lengthening open water season, and faster coastal erosion rates. In the nearshore zone, degradation rates are also controlled by seasonal processes like bedfast ice, brine injection, seasonal freezing under floating ice conditions and warm freshwater discharge from large rivers. The interplay of all these variables is complex and needs further research. To fill this knowledge gap, this thesis investigates sub-aquatic permafrost along the southern coast of the Bykovsky Peninsula in eastern Siberia. Sediment cores and ground temperature profiles were collected at a freshwater thermokarst lake and two thermokarst lagoons in 2017. At this site, the coastline is retreating, and seawater is inundating various types of permafrost: sections of ice-rich Pleistocene permafrost (Yedoma) cliffs at the coastline alternate with lagoons and lower elevation previously thawed and refrozen permafrost basins (Alases). Electrical resistivity surveys with floating electrodes were carried out to map ice-bearing permafrost and taliks (unfrozen zones in the permafrost, usually formed beneath lakes) along the diverse coastline and in the lagoons. Combined with the borehole data, the electrical resistivity results permit estimation of contemporary ice-bearing permafrost characteristics, distribution, and occasionally, thickness. To conceptualize possible geomorphological and marine evolutionary pathways to the formation of the observed layering, numerical models were applied. The developed model incorporates salt diffusion and seasonal dynamics at the seabed, including bedfast ice. Even along coastlines with mean annual non-cryotic boundary conditions like the Bykovsky Peninsula, the modelling results show that salt diffusion minimizes seasonal freezing of the seabed, leading to faster degradation rates compared to models without salt diffusion. Seasonal processes are also important for thermokarst lake to lagoon transitions because lagoons can generate cold hypersaline conditions underneath the ice cover. My research suggests that ice-bearing permafrost can form in a coastal lagoon environment, even under floating ice. Alas basins, however, may degrade more than twice as fast as Yedoma permafrost in the first several decades of inundation. In addition to a lower ice content compared to Yedoma permafrost, Alas basins may be pre-conditioned with salt from adjacent lagoons. Considering the widespread distribution of thermokarst in the Arctic, its integration into geophysical models and offshore surveys is important to quantify and understand subsea permafrost degradation and aggradation. Through numerical modelling, fieldwork, and a circum-Arctic review of subsea permafrost literature, this thesis provides new insights into sub-aquatic permafrost evolution in saline coastal environments.},
  language  = {en}
}
@phdthesis{Kaya2020,
  author    = {Kaya, Mustafa},
  title     = {Cretaceous-Paleogene evolution of the proto-Paratethys Sea in Central Asia},
  doi       = {10.25932/publishup-48329},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-483295},
  school      = {Universit{\"a}t Potsdam},
  pages     = {iv, 237},
  year      = {2020},
  abstract  = {Unlike today's prevailing terrestrial features, the geologic past of Central Asia witnessed marine environments and conditions as well. A vast, shallow sea, known as proto-Paratethys, extended across Eurasia from the Mediterranean Tethys to the Tarim Basin in western China during Cretaceous to Paleogene times. This sea formed about 160 million years ago (during Jurassic times) when the waters of the Tethys Ocean flooded into Eurasia. It drastically retreated to the west and became isolated as the Paratethys during the Late Eocene-Oligocene (ca. 34 Ma). Having well-constrained timing and paleogeography for the Cretaceous-Paleogene proto-Paratethys sea incursions in Central Asia is essential to properly understand and distinguish the controlling mechanisms and their link to Asian paleoenvironmental and paleoclimatic change. The Cretaceous-Paleogene tectonic evolution of the Pamir and Tibet and their far-field effects play a significant role on the sedimentological and structural evolution of the Central Asian basins and on the evolution of the proto-Paratethys sea fluctuations as well. Comparing the records of the sea incursions to the tectonic and eustatic events has paramount importance to reveal the controlling mechanisms behind the sea incursions. However, due to inaccuracies in the dating of rocks (mostly continental rocks and marine rocks with benthic microfossils providing low-resolution biostratigraphic constraints) and conflicting results, there has been no consensus on the timing of the sea incursions and interpretation of their records has been in question. Here, we present a new chronostratigraphic framework based on biostratigraphy and magnetostratigraphy as well as a detailed paleoenvironmental analysis for the Cretaceous and Paleogene proto-Paratethys Sea incursions in the Tajik and Tarim basins, in Central Asia. This enables us to identify the major drivers of marine fluctuations and their potential consequences on regional and global climate, particularly Asian aridification and the global carbon cycle perturbations such as the Paleocene-Eocene Thermal Maximum (PETM). To estimate the paleogeographic evolution of the proto-Paratethys Sea, the refined age constraints and detailed paleoenvironmental interpretations are combined with successive paleogeographic maps. Regional coastlines and depositional environments during the Cretaceous-Paleogene sea advances and retreats were drawn based on the results of this thesis and integrated with existing literature to generate new paleogeographic maps. Before its final westward retreat in the Eocene, a total of six Cretaceous and Paleogene major sea incursions have been distinguished from the sedimentary records of the Tajik and Tarim basins in Central Asia. All have been studied and documented here. We identify the presence of marine conditions already in the Early Cretaceous in the western Tajik Basin, followed by the Cenomanian (ca. 100 Ma) and Santonian (ca. 86 Ma) major marine incursions far into the eastern Tajik and Tarim basins separated by a Turonian-Coniacian (ca. 92-86 Ma) regression. Basin-wide tectonic subsidence analyses imply that the Early Cretaceous invasion of the sea into the Tajik Basin is related to increased Pamir tectonism (at ca. 130 - 90 Ma) in a retro-arc basin setting inferred to be linked to collision and subduction. This tectonic event mainly governed the Cenomanian (ca. 100 Ma) sea incursion in conjunction with a coeval global eustatic high resulting in the maximum geographic extent of the sea. The following Turonian-Coniacian (ca. 92-86 Ma) major regression, driven by eustasy, coincides with a sharp slowdown in tectonic subsidence related to a regime change in Pamir tectonism from compression to extension. The Santonian (ca. 86 Ma) major sea incursion was more likely controlled dominantly by eustasy as also evidenced by the coeval fluctuations in the west Siberian Basin. During the early Maastrichtian, the global Late Cretaceous cooling is inferred from the disappearance of mollusk-rich limestones and the dominance of bryozoan-rich and echinoderm-rich limestones in the Tajik Basin documenting the first evidence for the Late Cretaceous cooling event in Central Asia. Following the last Cretaceous sea incursion, a major regional restriction event, marked by the exceptionally thick (≤ 400 m) shelf evaporites is assigned a Danian-Selandian age (ca. 63-59 Ma). This is followed by the largest recorded proto-Paratethys sea incursion with a transgression estimated as early Thanetian (ca. 59-57 Ma) and a regression within the Ypresian (ca. 53-52 Ma). The transgression of the next incursion is now constrained as early Lutetian (ca. 47-46 Ma), whereas its regression is constrained as late Lutetian (ca. 41 Ma) and is associated with a drastic increase in both tectonic subsidence and basin infilling. The age of the final and least pronounced sea incursion restricted to the westernmost margin of the Tarim Basin is assigned as Bartonian-Priabonian (ca. 39.7-36.7 Ma). We interpret the long-term westward retreat of the proto-Paratethys Sea starting at ca. 41 Ma to be associated with far-field tectonic effects of the Indo-Asia collision and Pamir/Tibetan plateau uplift. Short-term eustatic sea level transgressions are superimposed on this long-term regression and seem coeval with the transgression events in the other northern Peri-Tethyan sedimentary provinces for the 1st and 2nd Paleogene sea incursions. However, the last Paleogene sea incursion is interpreted as related to tectonism. The transgressive and regressive intervals of the proto-Paratethys Sea correlate well with the reported humid and arid phases, respectively in the Qaidam and Xining basins, thus demonstrating the role of the proto-Paratethys Sea as an important moisture source for the Asian interior and its regression as a contributor to Asian aridification. We lastly study the mechanics, relative contribution and preservation efficiency of ancient epicontinental seas as carbon sinks with new and existing data, using organic rich (sapropel) deposits dated to the PETM from the extensive epicontinental proto-Paratethys and West Siberian seas. We estimate ca. 1390±230 Gt organic C burial, a substantial amount compared to previously estimated global total excess organic C burial (ca. 1700-2900 Gt) is focused in the proto-Paratethys and West Siberian seas alone. We also speculate that enhanced organic carbon burial later over much of the proto-Paratethys (and later Paratethys) basin (during the deposition of the Kuma Formation and Maikop series, repectively) may have majorly contributed to drawdown of atmospheric carbon dioxide before and during the EOT cooling and glaciation of Antarctica. For past periods with smaller epicontinental seas, the effectiveness of this negative carbon cycle feedback was arguably diminished, and the same likely applies to the present-day.},
  language  = {en}
}
@phdthesis{Friese2020,
  author    = {Friese, Andr{\´e}},
  title     = {Biogeochemistry of ferruginous sediments of Lake Towuti, Sulawesi, Indonesia},
  doi       = {10.25932/publishup-47535},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-475355},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxiv, 233},
  year      = {2020},
  abstract  = {Ferruginous conditions were a prominent feature of the oceans throughout the Precambrian Eons and thus throughout much of Earth's history. Organic matter mineralization and diagenesis within the ferruginous sediments that deposited from Earth's early oceans likely played a key role in global biogeochemical cycling. Knowledge of organic matter mineralization in ferruginous sediments, however, remains almost entirely conceptual, as modern analogue environments are extremely rare and largely unstudied, to date. Lake Towuti on the island of Sulawesi, Indonesia is such an analogue environment and the purpose of this PhD project was to investigate the rates and pathways of organic matter mineralization in its ferruginous sediments. Lake Towuti is the largest tectonic lake in Southeast Asia and is hosted in the mafic and ultramafic rocks of the East Sulawesi Ophiolite. It has a maximum water depth of 203 m and is weakly thermally stratified. A well-oygenated surface layer extends to 70 m depth, while waters below 130 m are persistently anoxic. Intensive weathering of the ultramafic catchment feeds the lake with large amounts of iron(oxy)hydroxides while the runoff contains only little sulfate, leading to sulfate-poor (< 20 µM) lake water and anoxic ferruginous conditions below 130 m. Such conditions are analogous to the ferruginous water columns that persisted throughout much of the Archean and Proterozoic eons. Short (< 35 cm) sediment cores were collected from different water depths corresponding to different bottom water redox conditions. Also, a drilling campaign of the International Continental Scientific Drilling Program (ICDP) retrieved a 114 m long sediment core dedicated for geomicrobiological investigations from a water depth of 153 m, well below the depth of oxygen penetration at the time of sampling. Samples collected from these sediment cores form the fundament of this thesis and were used to perform a suite of biogeochemical and microbiological analyses. Geomirobiological investigations depend on uncontaminated samples. However, exploration of subsurface environments relies on drilling, which requires the use of a drilling fluid. Drilling fluid infiltration during drilling can not be avoided. Thus, in order to trace contamination of the sediment core and to identify uncontaminated samples for further analyses a simple and inexpensive technique for assessing contamination during drilling operations was developed and applied during the ICDP drilling campaign. This approach uses an aqeous fluorescent pigment dispersion commonly used in the paint industry as a particulate tracer. It has the same physical properties as conventionally used particulate tracers. However, the price is nearly four orders of magnitude lower solving the main problem of particulate tracer approaches. The approach requires only a minimum of equipment and allows for a rapid contamination assessment potentially even directly on site, while the senstitivity is in the range of already established approaches. Contaminated samples in the drill core were identified and not included for further geomicrobiological investigations. Biogeochemical analyses of short sediment cores showed that Lake Towutis sediments are strongly depleted in electron acceptors commonly used in microbial organic matter mineralization (i.e. oxygen, nitrate, sulfate). Still, the sediments harbor high microbial cell densities, which are a function of redox conditions of Lake Towuti's bottom water. In shallow water depths bottom water oxygenation leads to a higher input of labile organic matter and electron acceptors like sulfate and iron, which promotes a higher microbial abundance. Microbial analyses showed that a versatile microbial community with a potential to perform metabolisms related to iron and sulfate reduction, fermentation as well as methanogenesis inhabits Lake Towuti's surface sediments. Biogeochemical investigations of the upper 12 m of the 114 m sediment core showed that Lake Towuti's sediment is extremely rich in iron with total concentrations up to 2500 µmol cm-3 (20 wt. \%), which makes it the natural sedimentary environment with the highest total iron concentrations studied to date. In the complete or near absence of oxygen, nitrate and sulfate, organic matter mineralization in ferruginous sediments would be expected to proceed anaerobically via the energetically most favorable terminal electron acceptors available - in this case ferric iron. Astonishingly, however, methanogenesis is the dominant (>85 \%) organic matter mineralization process in Lake Towuti's sediment. Reactive ferric iron known to be available for microbial iron reduction is highly abundant throughout the upper 12 m and thus remained stable for at least 60.000 years. The produced methane is not oxidized anaerobically and diffuses out of the sediment into the water column. The proclivity towards methanogenesis, in these very iron-rich modern sediments, implies that methanogenesis may have played a more important role in organic matter mineralization thoughout the Precambrian than previously thought and thus could have been a key contributor to Earth's early climate dynamics. Over the whole sequence of the 114 m long sediment core siderites were identified and characterized using high-resolution microscopic and spectroscopic imaging together with microchemical and geochemical analyses. The data show early diagenetic growth of siderite crystals as a response to sedimentary organic matter mineralization. Microchemical zoning was identified in all siderite crystals. Siderite thus likely forms during diagenesis through growth on primary existing phases and the mineralogical and chemical features of these siderites are a function of changes in redox conditions of the pore water and sediment over time. Identification of microchemical zoning in ancient siderites deposited in the Precambrian may thus also be used to infer siderite growth histories in ancient sedimentary rocks including sedimentary iron formations.},
  language  = {en}
}
@phdthesis{Meijer2020,
  author    = {Meijer, Niels},
  title     = {Asian dust, monsoons and westerlies during the Eocene},
  doi       = {10.25932/publishup-48868},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-488687},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 155},
  year      = {2020},
  abstract  = {The East Asian monsoons characterize the modern-day Asian climate, yet their geological history and driving mechanisms remain controversial. The southeasterly summer monsoon provides moisture, whereas the northwesterly winter monsoon sweeps up dust from the arid Asian interior to form the Chinese Loess Plateau. The onset of this loess accumulation, and therefore of the monsoons, was thought to be 8 million years ago (Ma). However, in recent years these loess records have been extended further back in time to the Eocene (56-34 Ma), a period characterized by significant changes in both the regional geography and global climate. Yet the extent to which these reconfigurations drive atmospheric circulation and whether the loess-like deposits are monsoonal remains debated. In this thesis, I study the terrestrial deposits of the Xining Basin previously identified as Eocene loess, to derive the paleoenvironmental evolution of the region and identify the geological processes that have shaped the Asian climate. I review dust deposits in the geological record and conclude that these are commonly represented by a mix of both windblown and water-laid sediments, in contrast to the pure windblown material known as loess. Yet by using a combination of quartz surface morphologies, provenance characteristics and distinguishing grain-size distributions, windblown dust can be identified and quantified in a variety of settings. This has important implications for tracking aridification and dust-fluxes throughout the geological record. Past reversals of Earth's magnetic field are recorded in the deposits of the Xining Basin and I use these together with a dated volcanic ash layer to accurately constrain the age to the Eocene period. A combination of pollen assemblages, low dust abundances and other geochemical data indicates that the early Eocene was relatively humid suggesting an intensified summer monsoon due to the warmer greenhouse climate at this time. A subsequent shift from predominantly freshwater to salt lakes reflects a long-term aridification trend possibly driven by global cooling and the continuous uplift of the Tibetan Plateau. Superimposed on this aridification are wetter intervals reflected in more abundant lake deposits which correlate with highstands of the inland proto-Paratethys Sea. This sea covered the Eurasian continent and thereby provided additional moisture to the winter-time westerlies during the middle to late Eocene. The long-term aridification culminated in an abrupt shift at 40 Ma reflected by the onset of windblown dust, an increase in steppe-desert pollen, the occurrence of high-latitude orbital cycles and northwesterly winds identified in deflated salt deposits. Together, these indicate the onset of a Siberian high atmospheric pressure system driving the East Asian winter monsoon as well as dust storms and was triggered by a major sea retreat from the Asian interior. These results therefore show that the proto-Paratethys Sea, though less well recognized than the Tibetan Plateau and global climate, has been a major driver in setting up the modern-day climate in Asia.},
  language  = {en}
}
@phdthesis{Nardini2020,
  author    = {Nardini, Livia},
  title     = {Influence of heterogeneities on the initiation of shear zones in the ductile regime},
  doi       = {10.25932/publishup-44616},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-446165},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XIX, 121},
  year      = {2020},
  abstract  = {The current thesis contains the results from two experimental and one modelling study focused on the topic of ductile strain localization in the presence of material heterogeneities. Localization of strain in the high temperature regime is a well known feature of rock deformation occurring in nature at different scales and in a variety of lithologies. Large scale shear zones at the roots of major crustal fault zones are considered responsible for the activity of plate tectonics on our planet. A large number of mechanisms are suggested to be associated with strain softening and nucleation of localization. Among these, the presence of material heterogeneities within homogeneous host rocks is frequently observed in field examples to trigger shear zone development. Despite a number of studies conducted on the topic, the mechanisms controlling initiation and evolution of localization are not fully understood yet. We investigated, experimentally and by means of numerical modelling, phenomenological and microphysical aspects of high temperature strain localization in a homogeneous body containing single and paired inclusions of weaker material. A monomineralic carbonate system composed of Carrara marble (homogeneous, strong matrix) and Solnhofen limestone (weak planar inclusions) is selected for our studies based on its versatility as an experimental material and on the frequent occurrence of carbonate rocks at the core of natural shear zones. To explore the influence of different loading conditions on heterogeneity-induced high temperature shear zones we conducted torsion experiments under constant twist (deformation) rate and constant torque (stress) conditions in a Paterson-type deformation apparatus on hollow cylinders of marble containing single planar inclusions of limestone. At the imposed experimental conditions (900 ◦C temperature and 400 MPa confining pressure) both materials deform plastically and the marble is ≈ 9 times stronger than the limestone. The viscosity contrast between the two materials induces a perturbation of the stress field within the marble matrix at the tip of the planar inclusion. Early on along the deformation path (at bulk shear strains ≈ 0.3), heterogeneous distribution of strain can be observed under both loading conditions and a small area of incipient strain localization is formed at the tip of the weak limestone inclusion. Strongly deformed grains, incipient dynamic recrystallization and a weak crystallographic preferred orientation characterize the marble within an area a few mm in front of the inclusion. As the bulk strain is increased (up to γ ≈ 1), the area of microstructural modification is expanded along the inclusion plane, the texture strengthens and grain size refinement by dynamic recrystallization becomes pervasive. Locally, evidences for coexisting brittle deformation are also observed regardless of the imposed loading conditions. A shear zone is effectively formed within the deforming Carrara marble, its geometry controlled by the plane containing the thin plate of limestone. Thorough microstructural and textural analysis, however, do not reveal substantial differences in the mechanisms or magnitude of strain localization at the different loading conditions. We conclude that, in the presence of material heterogeneities capable of inducing strain softening, the imposed loading conditions do not affect ductile localization in its nucleating and transient stages. As the ultimate goal of experimental rock deformation is the extrapolation of results to geologically relevant time and space scales, we developed 2D numerical models reproducing (and benchmarked to) our experimental results. Our cm-scaled models have been implemented with a first-order strain-dependent softening law to reproduce the effect of rheological weakening in the deforming material. We successfully reproduced the local stress concentration at the inclusion tips and the strain localization initiated in the marble matrix. The heterogeneous distribution of strain and its evolution with imposed bulk deformation (i.e. the shape and extent of the nucleating shear zone) are observed to depend on the degree of softening imposed to the deforming matrix. When a second (artificial) softening step is introduced at elevated bulk strains in the model, the formation of a secondary high strain layer is observed at the core of the initial shear zone, analogous to the development of ultramylonite bands in high strain natural shear zones. Our results do not only reproduce the nucleation and transient evolution of a heterogeneity-induced high temperature shear zone with high accuracy, but also confirm the importance of introducing reliable softening laws capable of mimicking strain weakening to numerical models of crustal scale ductile processes. Material heterogeneities inducing strain localization in the field are often consisting of brittle precursors (joints and fractures). More generally, the interaction of brittle and ductile deformation mechanisms and its effect on the localization of strain have been a key topic in the structural geology community for a long time. The positive feedback between (micro)fracturing and ductile strain localization is a well recognized effect in a number of field examples. We experimentally investigated the influence of brittle deformation on the initiation and evolution of high temperature shear zones in a strong matrix containing pairs of weak material heterogeneities. Our Carrara marble-Solnhofen limestone inclusions system was tested in triaxial compression under constant strain rate and high temperature (900 ◦C) conditions in a Paterson deformation apparatus. The inclusion pairs were arranged in non-overlapping step-over geometries of either compressional or extensional nature. Experimental runs were conducted at different confining pressures (30, 50, 100 and 300 MPa) to induce various amounts of brittle deformation within the marble matrix. At low confinement (30 and 50 MPa) abundant brittle deformation is observed in all configurations, but the spatial distribution of cracks is dependent on the kinematics of the step-over region: concentrated along the shearing plane between the inclusions in the extensional samples, or broadly distributed around the inclusions but outside the step-over region in the compressional configuration. Accordingly, brittle-assisted ductile processes tend to localize deformation along the inclusions plane in the extensional geometry or to distribute widely across large areas of the matrix in the compressional step-over. At pressures of 100 and 300 MPa fracturing is mostly suppressed in both configurations and strain is accommodated almost entirely by viscous creep. In extensional samples this leads to progressive de-localization with increasing confinement. Our results show that, while ductile localization of strain is indeed more efficient where assisted by brittle processes, these latter are only effective if themselves heterogeneously distributed, ultimately a function of the local stress perturbations.},
  language  = {en}
}
@phdthesis{Schuck2020,
  author    = {Schuck, Bernhard},
  title     = {Geomechanical and petrological characterisation of exposed slip zones, Alpine Fault, New Zealand},
  doi       = {10.25932/publishup-44612},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-446129},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVII, 143},
  year      = {2020},
  abstract  = {The Alpine Fault is a large, plate-bounding, strike-slip fault extending along the north-western edge of the Southern Alps, South Island, New Zealand. It regularly accommodates large (MW > 8) earthquakes and has a high statistical probability of failure in the near future, i.e., is late in its seismic cycle. This pending earthquake and associated co-seismic landslides are expected to cause severe infrastructural damage that would affect thousands of people, so it presents a substantial geohazard. The interdisciplinary study presented here aims to characterise the fault zone's 4D (space and time) architecture, because this provides information about its rheological properties that will enable better assessment of the hazard the fault poses. The studies undertaken include field investigations of principal slip zone fault gouges exposed along strike of the fault, and subsequent laboratory analyses of these outcrop and additional borehole samples. These observations have provided new information on (I) characteristic microstructures down to the nanoscale that indicate which deformation mechanisms operated within the rocks, (II) mineralogical information that constrains the fault's geomechanical behaviour and (III) geochemical compositional information that allows the influence of fluid- related alteration processes on material properties to be unraveled. Results show that along-strike variations of fault rock properties such as microstructures and mineralogical composition are minor and / or do not substantially influence fault zone architecture. They furthermore provide evidence that the architecture of the fault zone, particularly its fault core, is more complex than previously considered, and also more complex than expected for this sort of mature fault cutting quartzofeldspathic rocks. In particular our results strongly suggest that the fault has more than one principal slip zone, and that these form an anastomosing network extending into the basement below the cover of Quaternary sediments. The observations detailed in this thesis highlight that two major processes, (I) cataclasis and (II) authigenic mineral formation, are the major controls on the rheology of the Alpine Fault. The velocity-weakening behaviour of its fault gouge is favoured by abundant nanoparticles promoting powder lubrication and grain rolling rather than frictional sliding. Wall-rock fragmentation is accompanied by co-seismic, fluid-assisted dilatancy that is recorded by calcite cementation. This mineralisation, along with authigenic formation of phyllosilicates, quickly alters the petrophysical fault zone properties after each rupture, restoring fault competency. Dense networks of anastomosing and mutually cross-cutting calcite veins and intensively reworked gouge matrix demonstrate that strain repeatedly localised within the narrow fault gouge. Abundantly undeformed euhedral chlorite crystallites and calcite veins cross-cutting both fault gouge and gravels that overlie basement on the fault's footwall provide evidence that the processes of authigenic phyllosilicate growth, fluid-assisted dilatancy and associated fault healing are processes active particularly close to the Earth's surface in this fault zone. Exposed Alpine Fault rocks are subject to intense weathering as direct consequence of abundant orogenic rainfall associated with the fault's location at the base of the Southern Alps. Furthermore, fault rock rheology is substantially affected by shallow-depth conditions such as the juxtaposition of competent hanging wall fault rocks on poorly consolidated footwall sediments. This means microstructural, mineralogical and geochemical properties of the exposed fault rocks may differ substantially from those at deeper levels, and thus are not characteristic of the majority of the fault rocks' history. Examples are (I) frictionally weak smectites found within the fault gouges being artefacts formed at temperature conditions, and imparting petrophysical properties that are not typical for most of fault rocks of the Alpine Fault, (II) grain-scale dissolution resulting from subaerial weathering rather than deformation by pressure-solution processes and (III) fault gouge geometries being more complex than expected for deeper counterparts. The methodological approaches deployed in analyses of this, and other fault zones, and the major results of this study are finally discussed in order to contextualize slip zone investigations of fault zones and landslides. Like faults, landslides are major geohazards, which highlights the importance of characterising their geomechanical properties. Similarities between faults, especially those exposed to subaerial processes, and landslides, include mineralogical composition and geomechanical behaviour. Together, this ensures failure occurs predominantly by cataclastic processes, although aseismic creep promoted by weak phyllosilicates is not uncommon. Consequently, the multidisciplinary approach commonly used to investigate fault zones may contribute to increase the understanding of landslide faulting processes and the assessment of their hazard potential.},
  language  = {en}
}
@phdthesis{Zorn2020,
  author    = {Zorn, Edgar Ulrich},
  title     = {Monitoring lava dome growth and deformation with photogrammetric methods and modelling},
  doi       = {10.25932/publishup-48360},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-483600},
  school      = {Universit{\"a}t Potsdam},
  pages     = {IX, 167},
  year      = {2020},
  abstract  = {Lava domes are severely hazardous, mound-shaped extrusions of highly viscous lava and commonly erupt at many active stratovolcanoes around the world. Due to gradual growth and flank oversteepening, such lava domes regularly experience partial or full collapses, resulting in destructive and far-reaching pyroclastic density currents. They are also associated with cyclic explosive activity as the complex interplay of cooling, degassing, and solidification of dome lavas regularly causes gas pressurizations on the dome or the underlying volcano conduit. Lava dome extrusions can last from days to decades, further highlighting the need for accurate and reliable monitoring data. This thesis aims to improve our understanding of lava dome processes and to contribute to the monitoring and prediction of hazards posed by these domes. The recent rise and sophistication of photogrammetric techniques allows for the extraction of observational data in unprecedented detail and creates ideal tools for accomplishing this purpose. Here, I study natural lava dome extrusions as well as laboratory-based analogue models of lava dome extrusions and employ photogrammetric monitoring by Structure-from-Motion (SfM) and Particle-Image-Velocimetry (PIV) techniques. I primarily use aerial photography data obtained by helicopter, airplanes, Unoccupied Aircraft Systems (UAS) or ground-based timelapse cameras. Firstly, by combining a long time-series of overflight data at Volc{\´a}n de Colima, M{\´e}xico, with seismic and satellite radar data, I construct a detailed timeline of lava dome and crater evolution. Using numerical model, the impact of the extrusion on dome morphology and loading stress is further evaluated and an impact on the growth direction is identified, bearing important implications for the location of collapse hazards. Secondly, sequential overflight surveys at the Santiaguito lava dome, Guatemala, reveal surface motion data in high detail. I quantify the growth of the lava dome and the movement of a lava flow, showing complex motions that occur on different timescales and I provide insight into rock properties relevant for hazard assessment inferred purely by photogrammetric processing of remote sensing data. Lastly, I recreate artificial lava dome and spine growth using analogue modelling under controlled conditions, providing new insights into lava extrusion processes and structures as well as the conditions in which they form. These findings demonstrate the capabilities of photogrammetric data analyses to successfully monitor lava dome growth and evolution while highlighting the advantages of complementary modelling methods to explain the observed phenomena. The results presented herein further bear important new insights and implications for the hazards posed by lava domes.},
  language  = {en}
}
@phdthesis{Biedermann2020,
  author    = {Biedermann, Nicole},
  title     = {Carbonate-silicate reactions at conditions of the Earth's mantle and the role of carbonates as possible trace-element carriers},
  doi       = {10.25932/publishup-48277},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-482772},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 127},
  year      = {2020},
  abstract  = {Carbonates play a key role in the chemistry and dynamics of our planet. They are directly connected to the CO2 budget of our atmosphere and have a great impact on the deep carbon cycle. Moreover, recent studies have shown that carbonates are stable along the geothermal gradient down to Earth's lower mantle conditions, changing their crystal structure and related properties. Subducted carbonates may also react with silicates to form new phases. These reactions will redistribute elements, such as calcium (Ca), magnesium (Mg), iron (Fe) and carbon in the form of carbon dioxide (CO2), but also trace elements, that are carried by the carbonates. The trace elements of most interest are strontium (Sr) and rare earth elements (REE) which have been found to be important constituents in the composition of the primitive lower mantle and in mineral inclusions found in super-deep diamonds. However, the stability of carbonates in presence of mantle silicates at relevant temperatures is far from being well understood. Related to this, very little is known about distribution processes of trace elements between carbonates and mantle silicates. To shed light on these processes, we studied reactions between Sr- and REE-containing CaCO3 and Mg/Fe-bearing silicates of the system (Mg,Fe)2SiO4 - (Mg,Fe)SiO3 at high pressure and high temperature using synchrotron radiation based μ-X-ray diffraction (μ-XRD) and μ-X-ray fluorescence (μ-XRF) with μm-resolution in a laser-heated diamond anvil cell. X-ray diffraction is used to derive the structural changes of the phase reactions whereas X-ray fluorescence gives information on the chemical changes in the sample. In-situ experiments at high pressure and high temperature were performed at beamline P02.2 at PETRA III (Hamburg, Germany) and at beamline ID27 at ESRF (Grenoble, France). In addition to μ-XRD and μ-XRF, ex-situ measurements were made on the recovered sample material using transmission electron microscopy (TEM) and provided further insights into the reaction kinetics of carbonate-silicate reactions. Our investigations show that CaCO3 is unstable in presence of mantle silicates above 1700 K and a reaction takes place in which magnesite plus CaSiO3-perovskite are formed. In addition, we observed that a high content of iron in the carbonate-silicate system favours dolomite formation during the reaction. The subduction of natural carbonates with significant amounts of Sr leads to a comprehensive investigation of the stability not only of CaCO3 phases in contact with mantle silicates but also of SrCO3 (and of Sr-bearing CaCO3). We found that SrCO3 reacts with (Mg,Fe)SiO3-perovskite to form magnesite and gained evidence for the formation of SrSiO3-perovskite. To complement our study on the stability of SrCO3 at conditions of the Earth's lower mantle, we performed powder X-ray diffraction and single crystal X-ray diffraction experiments at ambient temperature and up to 49 GPa. We observed a transformation from SrCO3-I into a new high-pressure phase SrCO3-II at around 26 GPa with Pmmn crystal structure and a bulk modulus of 103(10) GPa. This information is essential to fully understand the phase behaviour and stability of carbonates in the Earth's lower mantle and to elucidate the possibility of introducing Sr into mantle silicates by carbonate-silicate reactions. Simultaneous recording of μ-XRD and μ-XRF in the μm-range over the heated areas provides spatial information not only about phase reactions but also on the elemental redistribution during the reactions. A comparison of the spatial intensity distribution of the XRF signal before and after heating indicates a change in the elemental distribution of Sr and an increase in Sr-concentration was found around the newly formed SrSiO3-perovskite. With the help of additional TEM analyses on the quenched sample material the elemental redistribution was studied at a sub-micrometer scale. Contrary to expectations from combined μ-XRD and μ-XRF measurements, we found that La and Eu were not incorporated into the silicate phases, instead they tend to form either isolated oxide phases (e.g. Eu2O3, La2O3) or hydroxyl-bastn{\"a}site (La(CO3)(OH)). In addition, we observed the transformation from (Mg,Fe)SiO3-perovskite to low-pressure clinoenstatite during pressure release. The monoclinic structure (P21/c) of this phase allows the incorporation of Ca as shown by additional EDX analyses and, to a minor extent, Sr too. Based on our experiments, we can conclude that a detection of the trace elements in-situ at high pressure and high temperature remains challenging. However, our first findings imply that silicates may incorporate the trace elements provided by the carbonates and indicate that carbonates may have a major effect on the trace element contents of mantle phases.},
  language  = {en}
}
@phdthesis{Pick2020,
  author    = {Pick, Leonie Johanna Lisa},
  title     = {The centennial evolution of geomagnetic activity and its driving mechanisms},
  doi       = {10.25932/publishup-47275},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472754},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 135},
  year      = {2020},
  abstract  = {This cumulative thesis is concerned with the evolution of geomagnetic activity since the beginning of the 20th century, that is, the time-dependent response of the geomagnetic field to solar forcing. The focus lies on the description of the magnetospheric response field at ground level, which is particularly sensitive to the ring current system, and an interpretation of its variability in terms of the solar wind driving. Thereby, this work contributes to a comprehensive understanding of long-term solar-terrestrial interactions. The common basis of the presented publications is formed by a reanalysis of vector magnetic field measurements from geomagnetic observatories located at low and middle geomagnetic latitudes. In the first two studies, new ring current targeting geomagnetic activity indices are derived, the Annual and Hourly Magnetospheric Currents indices (A/HMC). Compared to existing indices (e.g., the Dst index), they do not only extend the covered period by at least three solar cycles but also constitute a qualitative improvement concerning the absolute index level and the ~11-year solar cycle variability. The analysis of A/HMC shows that (a) the annual geomagnetic activity experiences an interval-dependent trend with an overall linear decline during 1900-2010 of ~5 \% (b) the average trend-free activity level amounts to ~28 nT (c) the solar cycle related variability shows amplitudes of ~15-45 nT (d) the activity level for geomagnetically quiet conditions (Kp<2) lies slightly below 20 nT. The plausibility of the last three points is ensured by comparison to independent estimations either based on magnetic field measurements from LEO satellite missions (since the 1990s) or the modeling of geomagnetic activity from solar wind input (since the 1960s). An independent validation of the longterm trend is problematic mainly because the sensitivity of the locally measured geomagnetic activity depends on geomagnetic latitude. Consequently, A/HMC is neither directly comparable to global geomagnetic activity indices (e.g., the aa index) nor to the partly reconstructed open solar magnetic flux, which requires a homogeneous response of the ground-based measurements to the interplanetary magnetic field and the solar wind speed. The last study combines a consistent, HMC-based identification of geomagnetic storms from 1930-2015 with an analysis of the corresponding spatial (magnetic local time-dependent) disturbance patterns. Amongst others, the disturbances at dawn and dusk, particularly their evolution during the storm recovery phases, are shown to be indicative of the solar wind driving structure (Interplanetary Coronal Mass Ejections vs. Stream or Co-rotating Interaction Regions), which enables a backward-prediction of the storm driver classes. The results indicate that ICME-driven geomagnetic storms have decreased since 1930 which is consistent with the concurrent decrease of HMC. Out of the collection of compiled follow-up studies the inclusion of measurements from high-latitude geomagnetic observatories into the third study's framework seems most promising at this point.},
  language  = {en}
}
@phdthesis{Liu2020,
  author    = {Liu, Sibiao},
  title     = {Controls of foreland-deformation patterns in the orogen-foreland shortening system},
  doi       = {10.25932/publishup-44573},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445730},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vi, 150},
  year      = {2020},
  abstract  = {The Andean Plateau (Altiplano-Puna Plateau) of the southern Central Andes is the second-highest orogenic plateau on our planet after Tibet. The Andean Plateau and its foreland exhibit a pronounced segmentation from north to south regarding the style and magnitude of deformation. In the Altiplano (northern segment), more than 300 km of tectonic shortening has been recorded, which started during the Eocene. A well-developed thin-skinned thrust wedge located at the eastern flank of the plateau (Subandes) indicates a simple-shear shortening mode. In contrast, the Puna (southern segment) records approximately half of the shortening of the Altiplano - and the shortening started later. The tectonic style in the Puna foreland switches to a thick-skinned mode, which is related to pure-shear shortening. In this study, carried out in the framework of the StRATEGy project, high-resolution 2D thermomechanical models were developed to systematically investigate controls of deformation patterns in the orogen-foreland pair. The 2D and 3D models were subsequently applied to study the evolution of foreland deformation and surface topography in the Altiplano-Puna Plateau. The models demonstrate that three principal factors control the foreland-deformation patterns: (i) strength differences in the upper lithosphere between the orogen and its foreland, rather than a strength difference in the entire lithosphere; (ii) gravitational potential energy of the orogen (GPE) controlled by crustal and lithospheric thicknesses, and (iii) the strength and thickness of foreland-basin sediments. The high-resolution 2D models are constrained by observations and successfully reproduce deformation structures and surface topography of different segments of the Altiplano-Puna plateau and its foreland. The developed 3D models confirm these results and suggest that a relatively high shortening rate in the Altiplano foreland (Subandean foreland fold-and-thrust belt) is due to simple-shear shortening facilitated by thick and mechanically weak sediments, a process which requires a much lower driving force than the pure-shear shortening deformation mode in the adjacent broken foreland of the Puna, where these thick sedimentary basin fills are absent. Lower shortening rate in the Puna foreland is likely accommodated in the forearc by the slab retreat.},
  language  = {en}
}
@phdthesis{KaramzadehToularoud2020,
  author    = {Karamzadeh Toularoud, Nasim},
  title     = {Earthquake source and receiver array optimal configuration},
  doi       = {10.25932/publishup-45982},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-459828},
  school      = {Universit{\"a}t Potsdam},
  pages     = {viii, 94},
  year      = {2020},
  abstract  = {Seismic receiver arrays have variety of applications in seismology, particularly when the signal enhancement is a prerequisite to detect seismic events, and in situations where installing and maintaining sparse networks are impractical. This thesis has mainly focused on the development of a new approach for seismological source and receiver array design.The proposed approach deals with the array design task as an optimization problem. The criteria and prerequisite constraints in array design task are integrated in objective function definition and evaluation of a optimization process. Three cases are covered in this thesis: (1) a 2-D receiver array geometry optimization, (2) a 3-D source array optimization, and (3) an array application to monitor microseismic data, where the effect of different types of noise are evaluated. A flexible receiver array design framework implements a customizable scenario modelling and optimization scheme by making use of synthetic seismograms. Using synthetic seismograms to evaluate array performance makes it possible to consider additional constraints, e.g. land ownership, site-specific noise levels or characteristics of the seismic sources under investigation. The use of synthetic array beamforming as an array design criteria is suggested. The framework is customized by designing a 2-D small scale receiver array to monitor earthquake swarm activity in northwest Bohemia/ Vogtland in central Europe. Two sub-functions are defined to verify the accuracy of horizontal slowness estimation; one to suppress aliasing effects due to possible secondary lobes of synthetic array beamforming calculated in horizontal slowness space, and the other to reduce the event's mislocation caused by miscalculation of the horizontal slowness vector. Subsequently, a weighting technique is applied to combine the sub-functions into one single scalar objective function to use in the optimization process. The idea of optimal array is employed to design a 3-D source array, given a well-located catalog of events. The conditions to make source arrays are formulated in four objective functions and a weighted sum technique is used to combine them in one single scalar function. The criteria are: (1) accurate slowness vector estimation, (2) high waveform coherency, (3) low location error and (4) high energy of coda phases. The method is evaluated by two experiments, (1) a synthetic test using realistic synthetic seismograms, (2) using real seismograms, and for each case optimized SA elements are configured using the data from the Vogtland area. The location of a possible scatterer in the velocity model, that makes the converted/reflected phases, e.g. sp-phases, is retrieved by a grid search method using the optimized SA. The accuracy of the approach and the obtained results demonstrated that the method is applicable to study the crustal structure and the location of crustal scatterers when the strong converted phases are observed in the data and a well-located catalog is available. Small aperture arrays are employed in seismology for a variety of applications, ranging from pure event detection to monitor and study of microcosmic activities. The monitoring of microseismicity during temporary human activities is often difficult, as the signal-to-noise ratio is very low and noise is strongly increased during the operation. The combination of small aperture seismic arrays with shallow borehole sensors offers a solution. We tested this monitoring approach at two different sites, (1) accompanying a fracking experiment in sedimentary shale at 4~km depth, and (2) above a gas field under depletion. Arrays recordings are compared with recordings available from shallow borehole sensors and examples of detection and location performance of the array are given. The effect of different types of noise at array and borehole stations are compared and discussed.},
  language  = {en}
}
@phdthesis{RodriguezZuluaga2020,
  author    = {Rodriguez Zuluaga, Juan},
  title     = {Electric and magnetic characteristics of equatorial plasma depletions},
  doi       = {10.25932/publishup-44587},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445873},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 87},
  year      = {2020},
  abstract  = {Near-Earth space represents a significant scientific and technological challenge. Particularly at magnetic low-latitudes, the horizontal magnetic field geometry at the dip equator and its closed field-lines support the existence of a distinct electric current system, abrupt electric field variations and the development of plasma irregularities. Of particular interest are small-scale irregularities associated with equatorial plasma depletions (EPDs). They are responsible for the disruption of trans-ionospheric radio waves used for navigation, communication, and Earth observation. The fast increase of satellite missions makes it imperative to study the near-Earth space, especially the phenomena known to harm space technology or disrupt their signals. EPDs correspond to the large-scale structure (i.e., tens to hundreds of kilometers) of topside F region irregularities commonly known as Spread F. They are observed as depleted-plasma density channels aligned with the ambient magnetic field in the post-sunset low-latitude ionosphere. Although the climatological variability of their occurrence in terms of season, longitude, local time and solar flux is well-known, their day to day variability is not. The sparse observations from ground-based instruments like radars and the few simultaneous measurements of ionospheric parameters by space-based instruments have left gaps in the knowledge of EPDs essential to comprehend their variability. In this dissertation, I profited from the unique observations of the ESA's Swarm constellation mission launched in November 2013 to tackle three issues that revealed novel and significant results on the current knowledge of EPDs. I used Swarm's measurements of the electron density, magnetic, and electric fields to answer, (1.) what is the direction of propagation of the electromagnetic energy associated with EPDs?, (2.) what are the spatial and temporal characteristics of the electric currents (field-aligned and diamagnetic currents) related to EPDs, i.e., seasonal/geographical, and local time dependencies?, and (3.) under what conditions does the balance between magnetic and plasma pressure across EPDs occur? The results indicate that: (1.) The electromagnetic energy associated with EPDs presents a preference for interhemispheric flows; that is, the related Poynting flux directs from one magnetic hemisphere to the other and varies with longitude and season. (2.) The field-aligned currents at the edges of EPDs are interhemispheric. They generally close in the hemisphere with the highest Pedersen conductance. Such hemispherical preference presents a seasonal/longitudinal dependence. The diamagnetic currents increase or decrease the magnetic pressure inside EPDs. These two effects rely on variations of the plasma temperature inside the EPDs that depend on longitude and local time. (3.) EPDs present lower or higher plasma pressure than the ambient. For low-pressure EPDs the plasma pressure gradients are mostly dominated by variations of the plasma density so that variations of the temperature are negligible. High-pressure EPDs suggest significant temperature variations with magnitudes of approximately twice the ambient. Since their occurrence is more frequent in the vicinity of the South Atlantic magnetic anomaly, such high temperatures are suggested to be due to particle precipitation. In a broader context, this dissertation shows how dedicated satellite missions with high-resolution capabilities improve the specification of the low-latitude ionospheric electrodynamics and expand knowledge on EPDs which is valuable for current and future communication, navigation, and Earth-observing missions. The contributions of this investigation represent several 'firsts' in the study of EPDs: (1.) The first observational evidence of interhemispheric electromagnetic energy flux and field-aligned currents. (2.) The first spatial and temporal characterization of EPDs based on their associated field-aligned and diamagnetic currents. (3.) The first evidence of high plasma pressure in regions of depleted plasma density in the ionosphere. These findings provide new insights that promise to advance our current knowledge of not only EPDs but the low-latitude post-sunset ionosphere environment.},
  language  = {en}
}
@phdthesis{Nooshiri2020,
  author    = {Nooshiri, Nima},
  title     = {Improvement of routine seismic source parameter estimation based on regional and teleseismic recordings},
  doi       = {10.25932/publishup-45946},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-459462},
  school      = {Universit{\"a}t Potsdam},
  pages     = {ix, 118},
  year      = {2020},
  abstract  = {Seismological agencies play an important role in seismological research and seismic hazard mitigation by providing source parameters of seismic events (location, magnitude, mechanism), and keeping these data accessible in the long term. The availability of catalogues of seismic source parameters is an important requirement for the evaluation and mitigation of seismic hazards, and the catalogues are particularly valuable to the research community as they provide fundamental long-term data in the geophysical sciences. This work is well motivated by the rising demand for developing more robust and efficient methods for routine source parameter estimation, and ultimately generation of reliable catalogues of seismic source parameters. Specifically, the aim of this work is to develop some methods to determine hypocentre location and temporal evolution of seismic sources based on regional and teleseismic observations more accurately, and investigate the potential of these methods to be integrated in near real-time processing. To achieve this, a location method that considers several events simultaneously and improves the relative location accuracy among nearby events has been provided. This method tries to reduce the biasing effects of the lateral velocity heterogeneities (or equivalently to compensate for limitations and inaccuracies in the assumed velocity model) by calculating a set of timing corrections for each seismic station. The systematic errors introduced into the locations by the inaccuracies in the assumed velocity structure can be corrected without explicitly solving for a velocity model. Application to sets of multiple earthquakes in complex tectonic environments with strongly heterogeneous structure such as subduction zones and plate boundary region demonstrate that this relocation process significantly improves the hypocentre locations compared to standard locations. To meet the computational demands of this location process, a new open-source software package has been developed that allows for efficient relocation of large-scale multiple seismic events using arrival time data. Upon that, a flexible location framework is provided which can be tailored to various application cases on local, regional, and global scales. The latest version of the software distribution including source codes, a user guide, an example data set, and a change history, is freely available to the community. The developed relocation algorithm has been modified slightly and then its performance in a simulated near real-time processing has been evaluated. It has been demonstrated that applying the proposed technique significantly reduces the bias in routine locations and enhance the ability to locate the lower magnitude events using only regional arrival data. Finally, to return to emphasis on global seismic monitoring, an inversion framework has been developed to determine the seismic source time function through direct waveform fitting of teleseismic recordings. The inversion technique can be systematically applied to moderate- size seismic events and has the potential to be performed in near real-time applications. It is exemplified by application to an abnormal seismic event; the 2017 North Korean nuclear explosion. The presented work and application case studies in this dissertation represent the first step in an effort to establish a framework for automatic, routine generation of reliable catalogues of seismic event locations and source time functions.},
  language  = {en}
}
@phdthesis{Purinton2020,
  author    = {Purinton, Benjamin},
  title     = {Remote sensing applications to earth surface processes in the Eastern Central Andes},
  doi       = {10.25932/publishup-44592},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-445926},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 134},
  year      = {2020},
  abstract  = {Geomorphology seeks to characterize the forms, rates, and magnitudes of sediment and water transport that sculpt landscapes. This is generally referred to as earth surface processes, which incorporates the influence of biologic (e.g., vegetation), climatic (e.g., rainfall), and tectonic (e.g., mountain uplift) factors in dictating the transport of water and eroded material. In mountains, high relief and steep slopes combine with strong gradients in rainfall and vegetation to create dynamic expressions of earth surface processes. This same rugged topography presents challenges in data collection and process measurement, where traditional techniques involving detailed observations or physical sampling are difficult to apply at the scale of entire catchments. Herein lies the utility of remote sensing. Remote sensing is defined as any measurement that does not disturb the natural environment, typically via acquisition of images in the visible- to radio-wavelength range of the electromagnetic spectrum. Remote sensing is an especially attractive option for measuring earth surface processes, because large areal measurements can be acquired at much lower cost and effort than traditional methods. These measurements cover not only topographic form, but also climatic and environmental metrics, which are all intertwined in the study of earth surface processes. This dissertation uses remote sensing data ranging from handheld camera-based photo surveying to spaceborne satellite observations to measure the expressions, rates, and magnitudes of earth surface processes in high-mountain catchments of the Eastern Central Andes in Northwest Argentina. This work probes the limits and caveats of remote sensing data and techniques applied to geomorphic research questions, and presents important progress at this disciplinary intersection.},
  language  = {en}
}
@phdthesis{Milewski2020,
  author    = {Milewski, Robert},
  title     = {Potential of optical remote sensing for the analysis of salt pan environments},
  doi       = {10.25932/publishup-47373},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473732},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xii, 145},
  year      = {2020},
  abstract  = {Salt pans also termed playas are common landscape features of hydrologically closed basins in arid and semiarid zones, where evaporation significantly exceeds the local precipitation. The analysis and monitoring of salt pan environments is important for the evaluation of current and future impact of these landscape features. Locally, salt pans have importance for the ecosystem, wildlife and human health, and through dust emissions they influence the climate on regional and global scales. Increasing economic exploitation of these environments in the last years, e.g. by brine extraction for raw materials, as well as climate change severely affect the water, material and energy balance of these systems. Optical remote sensing has the potential to characterise salt pan environments and to increase the understanding of processes in playa basins, as well as to assess wider impacts and feedbacks that exist between climate forcing and human intervention in their regions. Remote sensing techniques can provide information for extensive regions on a high temporal basis compared to traditional field samples and ground observations. Specifically, for salt pans that are often challenging to study because of their large size, remote location, and limited accessibility due to missing infrastructure and ephemeral flooding. Furthermore, the availability of current and upcoming hyperspectral remote sensing data opened the opportunity for the analyses of the complex reflectance signatures that relate to the mineralogical mixtures found in the salt pan sediments. However, these new advances in sensor technology, as well as increased data availability currently have not been fully explored for the study of salt pan environments. The potential of new sensors needs to be assessed and state of the art methods need to be adapted and improved to provide reliable information for in depth analysis of processes and characterisation of the recent condition, as well as to support long-term monitoring and to evaluate environmental impacts of changing climate and anthropogenic activity. This thesis provides an assessment of the capabilities of optical remote sensing for the study of salt pan environments that combines the information of hyperspectral data with the increased temporal coverage of multispectral observations for a more complete understanding of spatial and temporal complexity of salt pan environments using the Omongwa salt pan located in the south-west Kalahari as a test site. In particular, hyperspectral data are used for unmixing of the mineralogical surface composition, spectral feature-based modelling for quantification of main crust components, as well as time-series based classification of multispectral data for the assessment of the long-term dynamic and the analysis of the seasonal process regime. The results show that the surface of the Omongwa pan can be categorized into three major crust types based on diagnostic absorption features and mineralogical ground truth data. The mineralogical crust types can be related to different zones of surface dynamic as well as pan morphology that influences brine flow during the pan inundation and desiccation cycles. Using current hyperspectral imagery, as well as simulated data of upcoming sensors, robust quantification of the gypsum component could be derived. For the test site the results further indicate that the crust dynamic is mainly driven by flooding events in the wet season, but it is also influenced by temperature and aeolian activity in the dry season. Overall, the scientific outcomes show that optical remote sensing can provide a wide range of information helpful for the study of salt pan environments. The thesis also highlights that remote sensing approaches are most relevant, when they are adapted to the specific site conditions and research scenario and that upcoming sensors will increase the potential for mineralogical, sedimentological and geomorphological analysis, and will improve the monitoring capabilities with increased data availability.},
  language  = {en}
}
@phdthesis{RamezaniZiarani2020,
  author    = {Ramezani Ziarani, Maryam},
  title     = {Characterization of atmospheric processes related to hydro-meteorological extreme events over the south-central Andes},
  doi       = {10.25932/publishup-47175},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471755},
  school      = {Universit{\"a}t Potsdam},
  pages     = {i, 88},
  year      = {2020},
  abstract  = {The significant environmental and socioeconomic consequences of hydrometeorological extreme events, such as extreme rainfall, are constituted as a most important motivation for analyzing these events in the south-central Andes of NW Argentina. The steep topographic and climatic gradients and their interactions frequently lead to the formation of deep convective storms and consequently trigger extreme rainfall generation. In this dissertation, I focus on identifying the dominant climatic variables and atmospheric conditions and their spatiotemporal variability leading to deep convection and extreme rainfall in the south-central Andes. This dissertation first examines the significant contribution of temperature on atmospheric humidity (dew-point temperature, Td) and on convection (convective available potential energy, CAPE) for deep convective storms and hence, extreme rainfall along the topographic and climatic gradients. It was found that both climatic variables play an important role in extreme rainfall generation. However, their contributions differ depending on topographic and climatic sub-regions, as well as rainfall percentiles. Second, this dissertation explores if (near real-time) the measurements conducted by the Global Navigation Satellite System (GNSS) on integrated water vapor (IWV) provide reliable data for explaining atmospheric humidity. I argue that GNSS-IWV, in conjunction with other atmospheric stability parameters such as CAPE, is able to decipher the extreme rainfall in the eastern central Andes. In my work, I rely on a multivariable regression analysis described by a theoretical relationship and fitting function analysis. Third, this dissertation identifies the local impact of convection on extreme rainfall in the eastern Andes. Relying on a Principal Component Analysis (PCA) it was found that during the existence of moist and warm air, extreme rainfall is observed more often during local night hours. The analysis includes the mechanisms for this observation. Exploring the atmospheric conditions and climatic variables leading to extreme rainfall is one of the main findings of this dissertation. The conditions and variables are a prerequisite for understanding the dynamics of extreme rainfall and predicting these events in the eastern Andes.},
  language  = {en}
}
@phdthesis{Wang2020,
  author    = {Wang, Xia},
  title     = {Reef ecosystem recovery following the Middle Permian (Capitanian) mass extinction},
  doi       = {10.25932/publishup-48750},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-487502},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XI, 144},
  year      = {2020},
  abstract  = {To find out the future of nowadays reef ecosystem turnover under the environmental stresses such as global warming and ocean acidification, analogue studies from the geologic past are needed. As a critical time of reef ecosystem innovation, the Permian-Triassic transition witnessed the most severe demise of Phanerozoic reef builders, and the establishment of modern style symbiotic relationships within the reef-building organisms. Being the initial stage of this transition, the Middle Permian (Capitanian) mass extinction coursed a reef eclipse in the early Late Permian, which lead to a gap of understanding in the post-extinction Wuchiapingian reef ecosystem, shortly before the radiation of Changhsingian reefs. Here, this thesis presents detailed biostratigraphic, sedimentological, and palaeoecological studies of the Wuchiapingian reef recovery following the Middle Permian (Capitanian) mass extinction, on the only recorded Wuchiapingian reef setting, outcropping in South China at the Tieqiao section. Conodont biostratigraphic zonations were revised from the Early Permian Artinskian to the Late Permian Wuchiapingian in the Tieqiao section. Twenty main and seven subordinate conodont zones are determined at Tieqiao section including two conodont zone below and above the Tieqiao reef complex. The age of Tieqiao reef was constrained as early to middle Wuchiapingian. After constraining the reef age, detailed two-dimensional outcrop mapping combined with lithofacies study were carried out on the Wuchiapingian Tieqiao Section to investigate the reef growth pattern stratigraphically as well as the lateral changes of reef geometry on the outcrop scale. Semi-quantitative studies of the reef-building organisms were used to find out their evolution pattern within the reef recovery. Six reef growth cycles were determined within six transgressive-regressive cycles in the Tieqiao section. The reefs developed within the upper part of each regressive phase and were dominated by different biotas. The timing of initial reef recovery after the Middle Permian (Capitanian) mass extinction was updated to the Clarkina leveni conodont zone, which is earlier than previous understanding. Metazoans such as sponges were not the major components of the Wuchiapingian reefs until the 5th and 6th cycles. So, the recovery of metazoan reef ecosystem after the Middle Permian (Capitanian) mass extinction was obviously delayed. In addition, although the importance of metazoan reef builders such as sponges did increase following the recovery process, encrusting organisms such as Archaeolithoporella and Tubiphytes, combined with microbial carbonate precipitation, still played significant roles to the reef building process and reef recovery after the mass extinction. Based on the results from outcrop mapping and sedimentological studies, quantitative composition analysis of the Tieqiao reef complex were applied on selected thin sections to further investigate the functioning of reef building components and the reef evolution after the Middle Permian (Capitanian) mass extinction. Data sets of skeletal grains and whole rock components were analyzed. The results show eleven biocommunity clusters/eight rock composition clusters dominated by different skeletal grains/rock components. Sponges, Archaeolithoporella and Tubiphytes were the most ecologically important components within the Wuchiapingian Tieqiao reef, while the clotted micrites and syndepositional cements are the additional important rock components for reef cores. The sponges were important within the whole reef recovery. Tubiphytes were broadly distributed in different environments and played a key-role in the initial reef communities. Archaeolithoporella concentrated in the shallower part of reef cycles (i.e., the upper part of reef core) and was functionally significant for the enlargement of reef volume. In general, the reef recovery after the Middle Permian (Capitanian) mass extinction has some similarities with the reef recovery following the end-Permian mass extinction. It shows a delayed recovery of metazoan reefs and a stepwise recovery pattern that was controlled by both ecological and environmental factors. The importance of encrusting organisms and microbial carbonates are also similar to most of the other post-extinction reef ecosystems. These findings can be instructive to extend our understanding of the reef ecosystem evolution under environmental perturbation or stresses.},
  language  = {en}
}
@phdthesis{Barrionuevo2020,
  author    = {Barrionuevo, Mat{\´i}as},
  title     = {The role of the upper plate in the Andean tectonic evolution (33-36°S): insights from structural geology and numerical modeling},
  doi       = {10.25932/publishup-51590},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515909},
  school      = {Universit{\"a}t Potsdam},
  pages     = {148, S2},
  year      = {2020},
  abstract  = {Los Andes Centrales del Sur (33-36°S) son un gran laboratorio para el estudio de los procesos de deformaci{\´o}n orog{\´e}nica, donde las condiciones de borde, como la geometr{\´i}a de la placa subductada, imponen un importante control sobre la deformaci{\´o}n andina. Por otro lado, la Placa Sudamericana presenta una serie de heterogeneidades que tambi{\´e}n imparten un control sobre el modo de deformaci{\´o}n. El objetivo de esta tesis es probar el control de este {\´u}ltimo factor sobre la construcci{\´o}n del sistema orog{\´e}nico andino. A partir de la integraci{\´o}n de la informaci{\´o}n superficial y de subsuelo en el {\´a}rea sur (34°-36°S), se estudi{\´o} la evoluci{\´o}n de la deformaci{\´o}n andina sobre el segmento de subducci{\´o}n normal. Se desarroll{\´o} un modelo estructural que eval{\´u}a el estado de esfuerzos desde el Mioceno hasta la actualidad, el rol de estructuras previas y su influencia en la migraci{\´o}n de fluidos. Con estos datos y publicaciones previas de la zona norte del {\´a}rea de estudio (33°-34ºS), se realiz{\´o} un modelado num{\´e}rico geodin{\´a}mico para probar la hip{\´o}tesis del papel de las heterogeneidades de la placa superior en la evoluci{\´o}n andina. Se utilizaron dos c{\´o}digos (LAPEX-2D y ASPECT) basados en elementos finitos/diferencias finitas, que simulan el comportamiento de materiales con reolog{\´i}as elastoviscopl{\´a}sticas bajo deformaci{\´o}n. Los resultados del modelado sugieren que la deformaci{\´o}n contraccional de la placa superior est{\´a} significativamente controlada por la resistencia de la lit{\´o}sfera, que est{\´a} definida por la composici{\´o}n de la corteza superior e inferior y por la proporci{\´o}n del manto litosf{\´e}rico, que a su vez est{\´a} definida por eventos tect{\´o}nicos previos. Estos eventos previos tambi{\´e}n definieron la composici{\´o}n de la corteza y su geometr{\´i}a, que es otro factor que controla la localizaci{\´o}n de la deformaci{\´o}n. Con una composici{\´o}n de corteza inferior m{\´a}s f{\´e}lsica, la deformaci{\´o}n sigue un modo de cizalla pura mientras que las composiciones m{\´a}s m{\´a}ficas provocan un modo de deformaci{\´o}n tipo cizalla simple. Por otro lado, observamos que el espesor inicial de la lit{\´o}sfera controla la localizaci{\´o}n de la deformaci{\´o}n, donde zonas con lit{\´o}sfera m{\´a}s fina es propensa a concentrar la deformaci{\´o}n. Un l{\´i}mite lit{\´o}sfera-asten{\´o}sfera asim{\´e}trico, como resultado del flujo de la cu{\~n}a mant{\´e}lica tiende a generar despegues vergentes al E.},
  language  = {en}
}
@phdthesis{Zeckra2020,
  author    = {Zeckra, Martin},
  title     = {Seismological and seismotectonic analysis of the northwestern Argentine Central Andean foreland},
  doi       = {10.25932/publishup-47324},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473240},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vii, 120},
  year      = {2020},
  abstract  = {After a severe M W 5.7 earthquake on October 17, 2015 in El Galp{\´o}n in the province of Salta NW Argentina, I installed a local seismological network around the estimated epicenter. The network covered an area characterized by inherited Cretaceous normal faults and neotectonic faults with unknown recurrence intervals, some of which may have been reactivated normal faults. The 13 three-component seismic stations recorded data continuously for 15 months. The 2015 earthquake took place in the Santa B{\´a}rbara System of the Andean foreland, at about 17km depth. This region is the easternmost morphostructural region of the central Andes. As a part of the broken foreland, it is bounded to the north by the Subandes fold-and-thrust belt and the Sierras Pampeanas to the south; to the east lies the Chaco-Paran{\´a} basin. A multi-stage morphotectonic evolution with thick-skinned basement uplift and coeval thin-skinned deformation in the intermontane basins is suggested for the study area. The release of stresses associated with the foreland deformation can result in strong earthquakes, as the study area is known for recurrent and historical, destructive earthquakes. The available continuous record reaches back in time, when the strongest event in 1692 (magnitude 7 or intensity IX) destroyed the city of Esteco. Destructive earthquakes and surface deformation are thus a hallmark of this part of the Andean foreland. With state-of-the-art Python packages (e.g. pyrocko, ObsPy), a semi-automatic approach is followed to analyze the collected continuous data of the seismological network. The resulting 1435 hypocenter locations consist of three different groups: 1.) local crustal earthquakes (nearly half of the events belong to this group), 2.) interplate activity, of regional distance in the slab of the Nazca-plate, and 3.) very deep earthquakes at about 600km depth. My major interest focused on the first event class. Those crustal events are partly aftershock events of the El Galp{\´o}n earthquake and a second earthquake, in the south of the same fault. Further events can be considered as background seismicity of other faults within the study area. Strikingly, the seismogenic zone encompass the whole crust and propagates brittle deformation down, close to the Moho. From the collected seismological data, a local seismic velocity model is estimated, using VELEST. After the execution of various stability tests, the robust minimum 1D-velocity model implies guiding values for the composition of the local, subsurface structure of the crust. Afterwards, performing a hypocenter relocation enables the assignment of individual earthquakes to aftershock clusters or extended seismotectonic structures. This allows the mapping of previously unknown seismogenic faults. Finally, focal mechanisms are modeled for events with acurately located hypocenters, using the newly derived local velocity model. A compressive regime is attested by the majority of focal mechanisms, while the strike direction of the individual seismogenic structures is in agreement with the overall north - south orientation of the Central Andes, its mountain front, and individual mountain ranges in the southern Santa-B{\´a}rbara-System.},
  language  = {en}
}
@phdthesis{Menges2020,
  author    = {Menges, Johanna},
  title     = {Organic Carbon Storage, Transfer and Transformation in the Himalaya},
  school      = {Universit{\"a}t Potsdam},
  pages     = {179},
  year      = {2020},
  abstract  = {The transfer of particulate organic carbon from continents to the ocean is an important component of the global carbon cycle. Transfer to and burial of photosynthetically fixed biospheric organic carbon in marine sediments can effectively sequester atmospheric carbon dioxide over geological timescales. The exhumation and erosion of fossil organic carbon contained in sedimentary rocks, i.e. petrogenic carbon, can result in remineralization, releasing carbon to the atmosphere. In contrast, eroded petrogenic organic carbon that gets transferred back to the ocean and reburied does not affect atmospheric carbon content. Mountain ranges play a key role in this transfer since they can source vast amounts of sediment including particulate organic carbon. Globally, the export of both, biospheric and petrogenic organic carbon has been linked to sediment export. Additionally, short transfer times from mountains to the ocean and high sediment concentrations have been shown to increase the likelihood of organic carbon burial. While the importance of mountain ranges in the organic carbon cycle is now widely recognized, the processes acting within mountain ranges to influence the storage, cycling and mobilization of organic carbon, as well as carbon fluxes from mountain ranges remain poorly constrained. In this thesis, I employ different methods to assess the nature and fate of particulate organic carbon in mountain belts, ranging from the molecular to regional landscape scale. These studies are located along the Trans-Himalayan Kali Gandaki River in Central Nepal. This river traverses all major geological and climatic zones of the Himalaya, from the dry northern Tibetan plateau to the high-relief, monsoon dominated steep High Himalaya and the lower relief and abundant vegetation of the Lesser Himalayan region. First, I document how biospheric organic matter has accumulated during the Holocene in the headwaters of the Kali Gandaki River valley, by combining compound specific isotope measurements with different dating methods and grain size data, and investigate the stability of this organic carbon reservoir on millennial timescales. I show, that around 1.6 ka an eco-geomorphic tipping point occurred leading to a destabilization of the landscape resulting in today's high erosion rates and the excavation of the aged organic carbon reservoir. This study highlights the climatic and geomorphic controls on biospheric organic carbon storage and release from mountain ranges. Second, I systematically investigate the spatial variation of particulate organic carbon fluxes across the Himalaya along the Kali Gandaki River, using bulk stable and radioactive isotopes combined with a new Bayesian modeling approach. The detailed dataset allows the distinction of aged and modern biospheric organic carbon as well as petrogenic organic carbon across the Himalayan mountain range and the investigation of the role of climatic and geomorphic factors in their riverine export. The data suggest a decoupling of the particulate organic carbon from the sediment yield along the Kali Gandaki River, partially driven by climatic and geomorphic processes. In contrast to the suspended sediment, a large part of the particulate organic carbon exported by the river originates from the Tibetan part of the catchment and is dominated by petrogenic organic carbon derived from Jurassic shales with only minor contributions of modern and aged biospheric organic carbon. These findings emphasize the importance of organic carbon source distribution and erosion mechanisms in determining the organic carbon export from mountain ranges. In a third step, I explore the potential of ultra-high resolution mass spectrometry for particulate organic carbon transport studies. I have generated a novel and unprecedented high-resolution molecular dataset, which contains up to 103 molecular formulas of the lipid fraction of particulate organic matter for modern and aged biospheric carbon, petrogenic organic carbon and river sediments. First, I test if this dataset can be used to better resolve different organic carbon sources and to identify new geochemical tracers. Using multivariate statistics, I identify up to 10² characteristic molecular formulas for the major organic carbon sources in the upper part of the Kali Gandaki catchment, and trace their transfer from the surrounding landscape into the river sediment. Second, I test the potential of the molecular dataset to trace molecular transformations along source-to-sink pathways. I identify changes in molecular metrics derived from the dataset, which are characteristic of transformation processes during incorporation of litter into soil, the aging of soil material, and the mobilization of the organic carbon into the river. These two studies demonstrate that high-resolution molecular datasets open a promising analytical window on particulate organic carbon and can provide novel insights into the composition, sourcing and transformation of riverine particulate organic carbon. Collectively, these studies advance our understanding of the processes contributing to the storage and mobilization of organic carbon in the Central Himalaya, the mountain belt that dominates global erosional fluxes. They do so by identifying the major sources of particulate organic carbon to the Trans-Himalayan Kali Gandaki River, by elucidating their sensitivity to climate and geomorphic processes, and by identifying some of the transformations of this material on the molecular scale. As a result, the thesis demonstrates that the amount and composition of organic carbon routed from mountain belts is a function of the dynamic interactions of geologic, biologic, geomorphic and climatic processes within the mountain belt. This understanding will ultimately help in answering whether the build-up and erosion of mountain ranges over geological time represents a net carbon source or sink to the atmosphere. Beyond this, the thesis contributes to our technical ability to characterize organic matter and attribute it to sources by scoping the potential of high-end molecular analysis.},
  language  = {en}
}
@phdthesis{Holm2020,
  author    = {Holm, Stine},
  title     = {Methanogenic communities and metaplasmidome-encoded functions in permafrost environments exposed to thaw},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 243},
  year      = {2020},
  abstract  = {This thesis investigates how the permafrost microbiota responds to global warming. In detail, the constraints behind methane production in thawing permafrost were linked to methanogenic activity, abundance and composition. Furthermore, this thesis offers new insights into microbial adaptions to the changing environmental conditions during global warming. This was assesed by investigating the potential ecological relevant functions encoded by plasmid DNA within the permafrost microbiota. Permafrost of both interglacial and glacial origin spanning the Holocene to the late Pleistocene, including Eemian, were studied during long-term thaw incubations. Furthermore, several permafrost cores of different stratigraphy, soil type and vegetation cover were used to target the main constraints behind methane production during short-term thaw simulations. Short- and long-term incubations simulating thaw with and without the addition of substrate were combined with activity measurements, amplicon and metagenomic sequencing of permanently frozen and seasonally thawed active layer. Combined, it allowed to address the following questions. i) What constraints methane production when permafrost thaws and how is this linked to methanogenic activity, abundance and composition? ii) How does the methanogenic community composition change during long-term thawing conditions? iii) Which potential ecological relevant functions are encoded by plasmid DNA in active layer soils? The major outcomes of this thesis are as follows. i) Methane production from permafrost after long-term thaw simulation was found to be constrained mainly by the abundance of methanogens and the archaeal community composition. Deposits formed during periods of warmer temperatures and increased precipitation, (here represented by deposits from the Late Pleistocene of both interstadial and interglacial periods) were found to respond strongest to thawing conditions and to contain an archaeal community dominated by methanogenic archaea (40\% and 100\% of all detected archaea). Methanogenic population size and carbon density were identified as main predictors for potential methane production in thawing permafrost in short-term incubations when substrate was sufficiently available. ii) Besides determining the methanogenic activity after long-term thaw, the paleoenvironmental conditions were also found to influence the response of the methanogenic community composition. Substantial shifts within methanogenic community structure and a drop in diversity were observed in deposits formed during warmer periods, but not in deposits from stadials, when colder and drier conditions occurred. Overall, a shift towards a dominance of hydrogenotrophic methanogens was observed in all samples, except for the oldest interglacial deposits from the Eemian, which displayed a potential dominance of acetoclastic methanogens. The Eemian, which is discussed to serve as an analogue to current climate conditions, contained highly active methanogenic communities. However, all potential limitation of methane production after permafrost thaw, it means methanogenic community structure, methanogenic population size, and substrate pool might be overcome after permafrost had thawed on the long-term. iii) Enrichments with soil from the seasonally thawed active layer revealed that its plasmid DNA ('metaplasmidome') carries stress-response genes. In particular it encoded antibiotic resistance genes, heavy metal resistance genes, cold shock proteins and genes encoding UV-protection. Those are functions that are directly involved in the adaptation of microbial communities to stresses in polar environments. It was further found that metaplasmidomes from the Siberian active layer originate mainly from Gammaproteobacteria. By applying enrichment cultures followed by plasmid DNA extraction it was possible to obtain a higher average contigs length and significantly higher recovery of plasmid sequences than from extracting plasmid sequences from metagenomes. The approach of analyzing 'metaplasmidomes' established in this thesis is therefore suitable for studying the ecological role of plasmids in polar environments in general. This thesis emphasizes that including microbial community dynamics have the potential to improve permafrost-carbon projections. Microbially mediated methane release from permafrost environments may significantly impact future climate change. This thesis identified drivers of methanogenic composition, abundance and activity in thawing permafrost landscapes. Finally, this thesis underlines the importance to study how the current warming Arctic affects microbial communities in order to gain more insight into microbial response and adaptation strategies.},
  language  = {en}
}