@phdthesis{NarayananNair2006,
  author    = {Narayanan Nair, Arun Kumar},
  title     = {Molecular dynamics simulations of polyelectrolyte brushes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7005},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {This thesis studies strong, completely charged polyelectrolyte brushes. Extensive molecular dynamics simulations are performed on different polyelectrolyte brush systems using local compute servers and massively parallel supercomputers. The full Coulomb interaction of charged monomers, counterions, and salt ions is treated explicitly. The polymer chains are anchored by one of their ends to a uncharged planar surface. The chains are treated under good solvent conditions. Monovalent salt ions (1:1 type) are modelled same as counterions. The studies concentrate on three different brush systems at constant temperature and moderate Coulomb interaction strength (Bjerrum length equal to bond length): The first system consists of a single polyelectrolyte brush anchored with varying grafting density to a plane. Results show that chains are extended up to about 2/3 of their contour length. The brush thickness slightly grows with increasing anchoring density. This slight dependence of the brush height on grafting density is in contrast to the well known scaling result for the osmotic brush regime. That is why the result obtained by simulations has stimulated further development of theory as well as new experimental investigations on polyelectrolyte brushes. This observation can be understood on a semi-quantitative level using a simple scaling model that incorporates excluded volume effects in a free-volume formulation where an effective cross section is assigned to the polymer chain from where couterions are excluded. The resulting regime is called nonlinear osmotic brush regime. Recently this regime was also obtained in experiments. The second system studied consists of polyelectrolyte brushes with added salt in the nonlinear osmotic regime. Varying salt is an important parameter to tune the structure and properties of polyelectrolytes. Further motivation is due to a theoretical scaling prediction by Pincus for the salt dependence of brush thickness. In the high salt limit (salt concentration much larger than counterion concentration) the brush height is predicted to decrease with increasing external salt, but with a relatively weak power law showing an exponent -1/3. There is some experimental and theoretical work that confirms this prediction, but there are other results that are in contradiction. In such a situation simulations are performed to validate the theoretical prediction. The simulation result shows that brush thickness decreases with added salt, and indeed is in quite good agreement with the scaling prediction by Pincus. The relation between buffer concentration and the effective ion strength inside the brush at varying salt concentration is of interest both from theoretical as well as experimental point of view. The simulation result shows that mobile ions (counterions as well as salt) distribute nonhomogeneously inside and outside of the brush. To explain the relation between the internal ion concentration with the buffer concentration a Donnan equilibrium approach is employed. Modifying the Donnan approach by taking into account the self-volume of polyelectrolyte chains as indicated above, the simulation result can be explained using the same effective cross section for the polymer chains. The extended Donnan equilibrium relation represents a interesting theoretical prediction that should be checked by experimental data. The third system consist of two interacting polyelectrolyte brushes that are grafted to two parallel surfaces. The interactions between brushes are important, for instance, in stabilization of dispersions against flocculation. In the simulations pressure is evaluated as a function of separation D between the two grafting planes. The pressure behavior shows different regimes for decreasing separation. This behavior is in qualitative agreement with experimental data. At relatively weak compression the pressure behavior obtained in the simulation agrees with a 1/D power law predicted by scaling theory. Beyond that the present study could supply new insight for understanding the interaction between polyelectrolyte brushes.},
  subject      = {Molekulardynamik},
  language  = {en}
}
@phdthesis{Schroeder2016,
  author    = {Schr{\"o}der, Henning},
  title     = {Ultrafast electron dynamics in Fe(CO)5 and Cr(CO)6},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94589},
  school      = {Universit{\"a}t Potsdam},
  pages     = {v, 87},
  year      = {2016},
  abstract  = {In this thesis, the two prototype catalysts Fe(CO)₅ and Cr(CO)₆ are investigated with time-resolved photoelectron spectroscopy at a high harmonic setup. In both of these metal carbonyls, a UV photon can induce the dissociation of one or more ligands of the complex. The mechanism of the dissociation has been debated over the last decades. The electronic dynamics of the first dissociation occur on the femtosecond timescale. For the experiment, an existing high harmonic setup was moved to a new location, was extended, and characterized. The modified setup can induce dynamics in gas phase samples with photon energies of 1.55eV, 3.10eV, and 4.65eV. The valence electronic structure of the samples can be probed with photon energies between 20eV and 40eV. The temporal resolution is 111fs to 262fs, depending on the combination of the two photon energies. The electronically excited intermediates of the two complexes, as well as of the reaction product Fe(CO)₄, could be observed with photoelectron spectroscopy in the gas phase for the first time. However, photoelectron spectroscopy gives access only to the final ionic states. Corresponding calculations to simulate these spectra are still in development. The peak energies and their evolution in time with respect to the initiation pump pulse have been determined, these peaks have been assigned based on literature data. The spectra of the two complexes show clear differences. The dynamics have been interpreted with the assumption that the motion of peaks in the spectra relates to the movement of the wave packet in the multidimensional energy landscape. The results largely confirm existing models for the reaction pathways. In both metal carbonyls, this pathway involves a direct excitation of the wave packet to a metal-to-ligand charge transfer state and the subsequent crossing to a dissociative ligand field state. The coupling of the electronic dynamics to the nuclear dynamics could explain the slower dissociation in Fe(CO)₅ as compared to Cr(CO)₆.},
  language  = {en}
}
@phdthesis{Kav2019,
  author    = {Kav, Batuhan},
  title     = {Membrane adhesion mediated via lipid-anchored saccharides},
  doi       = {10.25932/publishup-42879},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-428790},
  school      = {Universit{\"a}t Potsdam},
  pages     = {125},
  year      = {2019},
  abstract  = {Membrane adhesion is a fundamental biological process in which membranes are attached to neighboring membranes or surfaces. Membrane adhesion emerges from a complex interplay between the binding of membrane-anchored receptors/ligands and the membrane properties. In this work, we study membrane adhesion mediated by lipid-anchored saccharides using microsecond-long full-atomistic molecular dynamics simulations. Motivated by neutron scattering experiments on membrane adhesion via lipid-anchored saccharides, we investigate the role of LeX, Lac1, and Lac2 saccharides and membrane fluctuations in membrane adhesion. We study the binding of saccharides in three different systems: for saccharides in water, for saccharides anchored to essentially planar membranes at fixed separations, and for saccharides anchored to apposing fluctuating membranes. Our simulations of two saccharides in water indicate that the saccharides engage in weak interactions to form dimers. We find that the binding occurs in a continuum of bound states instead of a certain number of well-defined bound structures, which we term as "diffuse binding". The binding of saccharides anchored to essentially planar membranes strongly depends on separation of the membranes, which is fixed in our simulation system. We show that the binding constants for trans-interactions of two lipid-anchored saccharides monotonically decrease with increasing separation. Saccharides anchored to the same membrane leaflet engage in cis-interactions with binding constants comparable to the trans-binding constants at the smallest membrane separations. The interplay of cis- and trans-binding can be investigated in simulation systems with many lipid-anchored saccharides. For Lac2, our simulation results indicate a positive cooperativity of trans- and cis-binding. In this cooperative binding the trans-binding constant is enhanced by the cis-interactions. For LeX, in contrast, we observe no cooperativity between trans- and cis-binding. In addition, we determine the forces generated by trans-binding of lipid-anchored saccharides in planar membranes from the binding-induced deviations of the lipid-anchors. We find that the forces acting on trans-bound saccharides increase with increasing membrane separation to values of the order of 10 pN. The binding of saccharides anchored to the fluctuating membranes results from an interplay between the binding properties of the lipid-anchored saccharides and membrane fluctuations. Our simulations, which have the same average separation of the membranes as obtained from the neutron scattering experiments, yield a binding constant larger than in planar membranes with the same separation. This result demonstrates that membrane fluctuations play an important role at average membrane separations which are seemingly too large for effective binding. We further show that the probability distribution of the local separation can be well approximated by a Gaussian distribution. We calculate the relative membrane roughness and show that our results are in good agreement with the roughness values reported from the neutron scattering experiments.},
  language  = {en}
}
@phdthesis{Melani2019,
  author    = {Melani, Giacomo},
  title     = {From structural fluctuations to vibrational spectroscopy of adsorbates on surfaces},
  doi       = {10.25932/publishup-44182},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441826},
  school      = {Universit{\"a}t Potsdam},
  pages     = {119},
  year      = {2019},
  abstract  = {Aluminum oxide is an Earth-abundant geological material, and its interaction with water is of crucial importance for geochemical and environmental processes. Some aluminum oxide surfaces are also known to be useful in heterogeneous catalysis, while the surface chemistry of aqueous oxide interfaces determines the corrosion, growth and dissolution of such materials. In this doctoral work, we looked mainly at the (0001) surface of α-Al 2 O 3 and its reactivity towards water. In particular, a great focus of this work is dedicated to simulate and address the vibrational spectra of water adsorbed on the α-alumina(0001) surface in various conditions and at different coverages. In fact, the main source of comparison and inspiration for this work comes from the collaboration with the "Interfacial Molecular Spectroscopy" group led by Dr. R. Kramer Campen at the Fritz-Haber Institute of the MPG in Berlin. The expertise of our project partners in surface-sensitive Vibrational Sum Frequency (VSF) generation spectroscopy was crucial to develop and adapt specific simulation schemes used in this work. Methodologically, the main approach employed in this thesis is Ab Initio Molecular Dynamics (AIMD) based on periodic Density Functional Theory (DFT) using the PBE functional with D2 dispersion correction. The analysis of vibrational frequencies from both a static and a dynamic, finite-temperature perspective offers the ability to investigate the water / aluminum oxide interface in close connection to experiment. The first project presented in this work considers the characterization of dissociatively adsorbed deuterated water on the Al-terminated (0001) surface. This particular structure is known from both experiment and theory to be the thermodynamically most stable surface termination of α-alumina in Ultra-High Vacuum (UHV) conditions. Based on experiments performed by our colleagues at FHI, different adsorption sites and products have been proposed and identified for D 2 O. While previous theoretical investigations only looked at vibrational frequencies of dissociated OD groups by staticNormal Modes Analysis (NMA), we rather employed a more sophisticated approach to directly assess vibrational spectra (like IR and VSF) at finite temperature from AIMD. In this work, we have employed a recent implementation which makes use of velocity-velocity autocorrelation functions to simulate such spectral responses of O-H(D) bonds. This approach allows for an efficient and qualitatively accurate estimation of Vibrational Densities of States (VDOS) as well as IR and VSF spectra, which are then tested against experimental spectra from our collaborators. In order to extend previous work on unimolecularly dissociated water on α-Al 2 O 3 , we then considered a different system, namely, a fully hydroxylated (0001) surface, which results from the reconstruction of the UHV-stable Al-terminated surface at high water contents. This model is then further extended by considering a hydroxylated surface with additional water molecules, forming a two-dimensional layer which serves as a potential template to simulate an aqueous interface in environmental conditions. Again, employing finite-temperature AIMD trajectories at the PBE+D2 level, we investigated the behaviour of both hydroxylated surface (HS) and the water-covered structure derived from it (known as HS+2ML). A full range of spectra, from VDOS to IR and VSF, is then calculated using the same methodology, as described above. This is the main focus of the second project, reported in Chapter 5. In this case, comparison between theoretical spectra and experimental data is definitely good. In particular, we underline the nature of high-frequency resonances observed above 3700 cm -1 in VSF experiments to be associated with surface OH-groups, known as "aluminols" which are a key fingerprint of the fully hydroxylated surface. In the third and last project, which is presented in Chapter 6, the extension of VSF spectroscopy experiments to the time-resolved regime offered us the opportunity to investigate vibrational energy relaxation at the α-alumina / water interface. Specifically, using again DFT-based AIMD simulations, we simulated vibrational lifetimes for surface aluminols as experimentally detected via pump-probe VSF. We considered the water-covered HS model as a potential candidate to address this problem. The vibrational (IR) excitation and subsequent relaxation is performed by means of a non-equilibrium molecular dynamics scheme. In such a scheme, we specifically looked at the O-H stretching mode of surface aluminols. Afterwards, the analysis of non-equilibrium trajectories allows for an estimation of relaxation times in the order of 2-4 ps which are in overall agreement with measured ones. The aim of this work has been to provide, within a consistent theoretical framework, a better understanding of vibrational spectroscopy and dynamics for water on the α-alumina(0001) surface,ranging from very low water coverage (similar to the UHV case) up to medium-high coverages, resembling the hydroxylated oxide in environmental moist conditions.},
  language  = {en}
}
@phdthesis{Banerjee2020,
  author    = {Banerjee, Pallavi},
  title     = {Glycosylphosphatidylinositols (GPIs) and GPI-anchored proteins tethered to lipid bilayers},
  doi       = {10.25932/publishup-48956},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489561},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xv, 141},
  year      = {2020},
  abstract  = {Glycosylphosphatidylinositols (GPIs) are highly complex glycolipids that serve as membrane anchors to a large variety of eukaryotic proteins. These are covalently attached to a group of peripheral proteins called GPI-anchored proteins (GPI-APs) through a post-translational modification in the endoplasmic reticulum. The GPI anchor is a unique structure composed of a glycan, with phospholipid tail at one end and a phosphoethanolamine linker at the other where the protein attaches. The glycan part of the GPI comprises a conserved pseudopentasaccharide core that could branch out to carry additional glycosyl or phosphoethanolamine units. GPI-APs are involved in a diverse range of cellular processes, few of which are signal transduction, protein trafficking, pathogenesis by protozoan parasites like the malaria- causing parasite Plasmodium falciparum. GPIs can also exist freely on the membrane surface without an attached protein such as those found in parasites like Toxoplasma gondii, the causative agent of Toxoplasmosis. These molecules are both structurally and functionally diverse, however, their structure-function relationship is still poorly understood. This is mainly because no clear picture exists regarding how the protein and the glycan arrange with respect to the lipid layer. Direct experimental evidence is rather scarce, due to which inconclusive pictures have emerged, especially regarding the orientation of GPIs and GPI-APs on membrane surfaces and the role of GPIs in membrane organization. It appears that computational modelling through molecular dynamics simulations would be a useful method to make progress. In this thesis, we attempt to explore characteristics of GPI anchors and GPI-APs embedded in lipid bilayers by constructing molecular models at two different resolutions - all-atom and coarse-grained. First, we show how to construct a modular molecular model of GPIs and GPI-anchored proteins that can be readily extended to a broad variety of systems, addressing the micro-heterogeneity of GPIs. We do so by creating a hybrid link to which GPIs of diverse branching and lipid tails of varying saturation with their optimized force fields, GLYCAM06 and Lipid14 respectively, can be attached. Using microsecond simulations, we demonstrate that GPI prefers to "flop-down" on the membrane, thereby, strongly interacting with the lipid heads, over standing upright like a "lollipop". Secondly, we extend the model of the GPI core to carry out a systematic study of the structural aspects of GPIs carrying different side chains (parasitic and human GPI variants) inserted in lipid bilayers. Our results demonstrate the importance of the side branch residues as these are the most accessible, and thereby, recognizable epitopes. This finding qualitatively agrees with experimental observations that highlight the role of the side branches in immunogenicity of GPIs and the specificity thereof. The overall flop-down orientation of the GPIs with respect to the bilayer surface presents the side chain residues to face the solvent. Upon attaching the green fluorescent protein (GFP) to the GPI, it is seen to lie in close proximity to the bilayer, interacting both with the lipid heads and glycan part of the GPI. However the orientation of GFP is sensitive to the type of GPI it is attached to. Finally, we construct a coarse-grained model of the GPI and GPI-anchored GFP using a modified version of the MARTINI force-field, using which the timescale is enhanced by at least an order of magnitude compared to the atomistic system. This study provides a theoretical perspective on the conformational behavior of the GPI core and some of its branched variations in presence of lipid bilayers, as well as draws comparisons with experimental observations. Our modular atomistic model of GPI can be further employed to study GPIs of variable branching, and thereby, aid in designing future experiments especially in the area of vaccines and drug therapies. Our coarse-grained model can be used to study dynamic aspects of GPIs and GPI-APs w.r.t plasma membrane organization. Furthermore, the backmapping technique of converting coarse-grained trajectory back to the atomistic model would enable in-depth structural analysis with ample conformational sampling.},
  language  = {en}
}
@phdthesis{Lever2022,
  author    = {Lever, Fabiano},
  title     = {Probing the ultrafast dynamics of 2-Thiouracil with soft x-rays},
  doi       = {10.25932/publishup-55523},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-555230},
  school      = {Universit{\"a}t Potsdam},
  pages     = {129},
  year      = {2022},
  abstract  = {Understanding the changes that follow UV-excitation in thionucleobases is of great importance for the study of light-induced DNA lesions and, in a broader context, for their applications in medicine and biochemistry. Their ultrafast photophysical reactions can alter the chemical structure of DNA - leading to damages to the genetic code - as proven by the increased skin cancer risk observed for patients treated with thiouracil for its immunosuppressant properties. In this thesis, I present four research papers that result from an investigation of the ultrafast dynamics of 2-thiouracil by means of ultrafast x-ray probing combined with electron spectroscopy. A molecular jet in the gas phase is excited with a uv pulse and then ionized with x-ray radiation from a Free Electron Laser. The kinetic energy of the emitted electrons is measured in a magnetic bottle spectrometer. The spectra of the measured photo and Auger electrons are used to derive a picture of the changes in the geometrical and electronic configurations. The results allow us to look at the dynamical processes from a new perspective, thanks to the element- and site- sensitivity of x-rays. The custom-built URSA-PQ apparatus used in the experiment is described. It has been commissioned and used at the FL24 beamline of the FLASH2 FEL, showing an electron kinetic energy resolution of ∆E/E ~ 40 and a pump-probe timing resolution of 190 f s. X-ray only photoelectron and Auger spectra of 2-thiouracil are extracted from the data and used as reference. Photoelectrons following the formation a 2p core hole are identified, as well as resonant and non-resonant Auger electrons. At the L 1 edge, Coster-Kronig decay is observed from the 2s core hole. The UV-induced changes in the 2p photoline allow the study the electronic-state dynamics. With the use of an Excited-State Chemical Shift (ESCS) model, we observe a ultrafast ground-state relaxation within 250 f s. Furthermore, an oscillation with a 250 f s period is observed in the 2p binding energy, showing a coherent population exchange between electronic states. Auger electrons from the 2p core hole are analyzed and used to deduce a ultrafast C -S bond expansion on a sub 100 f s scale. A simple Coulomb-model, coupled to quantum chemical calculations, can be used to infer the geometrical changes in the molecular structure.},
  language  = {en}
}