@phdthesis{Ziege2022,
  author    = {Ziege, Ricardo},
  title     = {Growth dynamics and mechanical properties of E. coli biofilms},
  doi       = {10.25932/publishup-55986},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-559869},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 123},
  year      = {2022},
  abstract  = {Biofilms are complex living materials that form as bacteria get embedded in a matrix of self-produced protein and polysaccharide fibres. The formation of a network of extracellular biopolymer fibres contributes to the cohesion of the biofilm by promoting cell-cell attachment and by mediating biofilm-substrate interactions. This sessile mode of bacteria growth has been well studied by microbiologists to prevent the detrimental effects of biofilms in medical and industrial settings. Indeed, biofilms are associated with increased antibiotic resistance in bacterial infections, and they can also cause clogging of pipelines or promote bio-corrosion. However, biofilms also gained interest from biophysics due to their ability to form complex morphological patterns during growth. Recently, the emerging field of engineered living materials investigates biofilm mechanical properties at multiple length scales and leverages the tools of synthetic biology to tune the functions of their constitutive biopolymers. This doctoral thesis aims at clarifying how the morphogenesis of Escherichia coli (E. coli) biofilms is influenced by their growth dynamics and mechanical properties. To address this question, I used methods from cell mechanics and materials science. I first studied how biological activity in biofilms gives rise to non-uniform growth patterns. In a second study, I investigated how E. coli biofilm morphogenesis and its mechanical properties adapt to an environmental stimulus, namely the water content of their substrate. Finally, I estimated how the mechanical properties of E. coli biofilms are altered when the bacteria express different extracellular biopolymers. On nutritive hydrogels, micron-sized E. coli cells can build centimetre-large biofilms. During this process, bacterial proliferation and matrix production introduce mechanical stresses in the biofilm, which release through the formation of macroscopic wrinkles and delaminated buckles. To relate these biological and mechanical phenomena, I used time-lapse fluorescence imaging to track cell and matrix surface densities through the early and late stages of E. coli biofilm growth. Colocalization of high cell and matrix densities at the periphery precede the onset of mechanical instabilities at this annular region. Early growth is detected at this outer annulus, which was analysed by adding fluorescent microspheres to the bacterial inoculum. But only when high rates of matrix production are present in the biofilm centre, does overall biofilm spreading initiate along the solid-air interface. By tracking larger fluorescent particles for a long time, I could distinguish several kinematic stages of E. coli biofilm expansion and observed a transition from non-linear to linear velocity profiles, which precedes the emergence of wrinkles at the biofilm periphery. Decomposing particle velocities to their radial and circumferential components revealed a last kinematic stage, where biofilm movement is mostly directed towards the radial delaminated buckles, which verticalize. The resulting compressive strains computed in these regions were observed to substantially deform the underlying agar substrates. The co-localization of higher cell and matrix densities towards an annular region and the succession of several kinematic stages are thus expected to promote the emergence of mechanical instabilities at the biofilm periphery. These experimental findings are predicted to advance future modelling approaches of biofilm morphogenesis. E. coli biofilm morphogenesis is further anticipated to depend on external stimuli from the environment. To clarify how the water could be used to tune biofilm material properties, we quantified E. coli biofilm growth, wrinkling dynamics and rigidity as a function of the water content of the nutritive substrates. Time-lapse microscopy and computational image analysis revealed that substrates with high water content promote biofilm spreading kinetics, while substrates with low water content promote biofilm wrinkling. The wrinkles observed on biofilm cross-sections appeared more bent on substrates with high water content, while they tended to be more vertical on substrates with low water content. Both wet and dry biomass, accumulated over 4 days of culture, were larger in biofilms cultured on substrates with high water content, despite extra porosity within the matrix layer. Finally, the micro-indentation analysis revealed that substrates with low water content supported the formation of stiffer biofilms. This study shows that E. coli biofilms respond to the water content of their substrate, which might be used for tuning their material properties in view of further applications. Biofilm material properties further depend on the composition and structure of the matrix of extracellular proteins and polysaccharides. In particular, E. coli biofilms were suggested to present tissue-like elasticity due to a dense fibre network consisting of amyloid curli and phosphoethanolamine-modified cellulose. To understand the contribution of these components to the emergent mechanical properties of E. coli biofilms, we performed micro-indentation on biofilms grown from bacteria of several strains. Besides showing higher dry masses, larger spreading diameters and slightly reduced water contents, biofilms expressing both main matrix components also presented high rigidities in the range of several hundred kPa, similar to biofilms containing only curli fibres. In contrast, a lack of amyloid curli fibres provides much higher adhesive energies and more viscoelastic fluid-like material behaviour. Therefore, the combination of amyloid curli and phosphoethanolamine-modified cellulose fibres implies the formation of a composite material whereby the amyloid curli fibres provide rigidity to E. coli biofilms, whereas the phosphoethanolamine-modified cellulose rather acts as a glue. These findings motivate further studies involving purified versions of these protein and polysaccharide components to better understand how their interactions benefit biofilm functions. All three studies depict different aspects of biofilm morphogenesis, which are interrelated. The first work reveals the correlation between non-uniform biological activities and the emergence of mechanical instabilities in the biofilm. The second work acknowledges the adaptive nature of E. coli biofilm morphogenesis and its mechanical properties to an environmental stimulus, namely water. Finally, the last study reveals the complementary role of the individual matrix components in the formation of a stable biofilm material, which not only forms complex morphologies but also functions as a protective shield for the bacteria it contains. Our experimental findings on E. coli biofilm morphogenesis and their mechanical properties can have further implications for fundamental and applied biofilm research fields.},
  language  = {en}
}
@phdthesis{Sarlet2023,
  author    = {Sarlet, Adrien},
  title     = {Tuning the viscoelasticity of Escherichia coli biofilms},
  school      = {Universit{\"a}t Potsdam},
  pages     = {143},
  year      = {2023},
  abstract  = {Biofilms are heterogeneous structures made of microorganisms embedded in a self-secreted extracellular matrix. Recently, biofilms have been studied as sustainable living materials with a focus on the tuning of their mechanical properties. One way of doing so is to use metal ions. In particular biofilms have been shown to stiffen in presence of some metal cations and to soften in presence of others. However, the specificity and the determinants of those interactions vary between species. While Escherichia coli is a widely studied model organism, little is known concerning the response of its biofilms to metal ions. In this work, we aimed at tuning the mechanics of E. coli biofilms by acting on the interplay between matrix composition and metal cations. To do so, we worked with E. coli strains producing a matrix composed of curli amyloid fibres or phosphoethanolamine-cellulose (pEtN-cellulose) fibres or both. The viscoelastic behaviour of the resulting biofilms was investigated with rheology after incubation with one of the following metal ion solutions: FeCl3, AlCl3, ZnCl2 and CaCl2 or ultrapure water. We observed that the strain producing both fibres stiffen by a factor of two when exposed to the trivalent metal cations Al(III) and Fe(III) while no such response is observed for the bivalent cations Zn(II) and Ca(II). Strains producing only one matrix component did not show any stiffening in response to either cation, but even a small softening. In order to investigate further the contribution of each matrix component to the mechanical properties, we introduced additional bacterial strains producing curli fibres in combination with non-modified cellulose, non-modified cellulose only or neither component. We measured biofilms produced by those different strains with rheology and without any solution. Since rheology does not preserve the architecture of the matrix, we compared those results to the mechanical properties of biofilms probed with the non-destructive microindentation. The microindentation results showed that biofilm stiffness is mainly determined by the presence of curli amyloid fibres in the matrix. However, this clear distinction between biofilm matrices containing or not containing curli is absent from the rheology results, i.e. following partial destruction of the matrix architecture. In addition, rheology also indicated a negative impact of curli on biofilm yield stress and flow stress. This suggests that curli fibres are more brittle and therefore more affected by the mechanical treatments. Finally, to examine the molecular interactions between the biofilms and the metal cations, we used Attenuated total reflectance - Fourier transform infrared spectroscopy (ATR-FTIR) to study the three E.coli strains producing a matrix composed of curli amyloid fibres, pEtN-cellulose fibres or both. We measured biofilms produced by those strains in presence of each of the aforementioned metal cation solutions or ultrapure water. We showed that the three strains cannot be distinguished based on their FTIR spectra and that metal cations seem to have a non-specific effect on bacterial membranes in absence of pEtN-cellulose. We subsequently conducted similar experiments on purified curli or pEtN-cellulose fibres. The spectra of the pEtN-cellulose fibres revealed a non-valence-specific interaction between metal cations and the phosphate of the pEtN-modification. Altogether, these results demonstrate that the mechanical properties of E. coli biofilms can be tuned via incubation with metal ions. While the mechanism involving curli fibres remains to be determined, metal cations seem to adsorb onto pEtN-cellulose and this is not valence-specific. This work also underlines the importance of matrix architecture to biofilm mechanics and emphasises the specificity of each matrix composition.},
  language  = {en}
}
@phdthesis{Kettner2018,
  author    = {Kettner, Marie Therese},
  title     = {Microbial colonization of microplastic particles in aquatic systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418854},
  school      = {Universit{\"a}t Potsdam},
  pages     = {139},
  year      = {2018},
  abstract  = {The continuously increasing pollution of aquatic environments with microplastics (plastic particles < 5 mm) is a global problem with potential implications for organisms of all trophic levels. For microorganisms, trillions of these floating microplastics particles represent a huge surface area for colonization. Due to the very low biodegradability, microplastics remain years to centuries in the environment and can be transported over thousands of kilometers together with the attached organisms. Since also pathogenic, invasive, or otherwise harmful species could be spread this way, it is essential to study microplastics-associated communities. For this doctoral thesis, eukaryotic communities were analyzed for the first time on microplastics in brackish environments and compared to communities in the surrounding water and on the natural substrate wood. With Illumina MiSeq high-throughput sequencing, more than 500 different eukaryotic taxa were detected on the microplastics samples. Among them were various green algae, dinoflagellates, ciliates, fungi, fungal-like protists and small metazoans such as nematodes and rotifers. The most abundant organisms was a dinoflagellate of the genus Pfiesteria, which could include fish pathogenic and bloom forming toxigenic species. Network analyses revealed that there were numerous interaction possibilities among prokaryotes and eukaryotes in microplastics biofilms. Eukaryotic community compositions on microplastics differed significantly from those on wood and in water, and compositions were additionally distinct among the sampling locations. Furthermore, the biodiversity was clearly lower on microplastics in comparison to the diversity on wood or in the surrounding water. In another experiment, a situation was simulated in which treated wastewater containing microplastics was introduced into a freshwater lake. With increasing microplastics concentrations, the resulting bacterial communities became more similar to those from the treated wastewater. Moreover, the abundance of integrase I increased together with rising concentrations of microplastics. Integrase I is often used as a marker for anthropogenic environmental pollution and is further linked to genes conferring, e.g., antibiotic resistance. This dissertation gives detailed insights into the complexity of prokaryotic and eukaryotic communities on microplastics in brackish and freshwater systems. Even though microplastics provide novel microhabitats for various microbes, they might also transport toxigenic, pathogenic, antibiotic-resistant or parasitic organisms; meaning their colonization can pose potential threats to humans and the environment. Finally, this thesis explains the urgent need for more research as well as for strategies to minimize the global microplastic pollution.},
  language  = {en}
}
@article{EckertDiCesareKettneretal.2017,
  author    = {Eckert, Ester M. and Di Cesare, Andrea and Kettner, Marie Therese and Arias-Andres, Maria and Fontaneto, Diego and Grossart, Hans-Peter and Corno, Gianluca},
  title     = {Microplastics increase impact of treated wastewater on freshwater microbial community},
  series = {Environmental pollution},
  volume    = {234},
  journal   = {Environmental pollution},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0269-7491},
  doi       = {10.1016/j.envpol.2017.11.070},
  pages     = {495 -- 502},
  year      = {2017},
  abstract  = {Plastic pollution is a major global concern with several million microplastic particles entering every day freshwater ecosystems via wastewater discharge. Microplastic particles stimulate biofilm formation (plastisphere) throughout the water column and have the potential to affect microbial community structure if they accumulate in pelagic waters, especially enhancing the proliferation of biohazardous bacteria. To test this scenario, we simulated the inflow of treated wastewater into a temperate lake using a continuous culture system with a gradient of concentration of microplastic particles. We followed the effect of microplastics on the microbial community structure and on the occurrence of integrase 1 (intl), a marker associated with mobile genetic elements known as a proxy for anthropogenic effects on the spread of antimicrobial resistance genes. The abundance of intl increased in the plastisphere with increasing microplastic particle concentration, but not in the water surrounding the microplastic particles. Likewise, the microbial community on microplastic was more similar to the original wastewater community with increasing microplastic concentrations. Our results show that microplastic particles indeed promote persistence of typical indicators of microbial anthropogenic pollution in natural waters, and substantiate that their removal from treated wastewater should be prioritised. (C) 2017 Elsevier Ltd. All rights reserved.},
  language  = {en}
}
@article{AriasAndresKluemperRojasJimenezetal.2018,
  author    = {Arias-Andres, Maria and Kluemper, Uli and Rojas-Jimenez, Keilor and Grossart, Hans-Peter},
  title     = {Microplastic pollution increases gene exchange in aquatic ecosystems},
  series = {Environmental pollution},
  volume    = {237},
  journal   = {Environmental pollution},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0269-7491},
  doi       = {10.1016/j.envpol.2018.02.058},
  pages     = {253 -- 261},
  year      = {2018},
  abstract  = {Pollution by microplastics in aquatic ecosystems is accumulating at an unprecedented scale, emerging as a new surface for biofilm formation and gene exchange. In this study, we determined the permissiveness of aquatic bacteria towards a model antibiotic resistance plasmid, comparing communities that form biofilms on microplastics vs. those that are free-living. We used an exogenous and red-fluorescent E. coli donor strain to introduce the green-fluorescent broad-host-range plasmid pKJKS which encodes for trimethoprim resistance. We demonstrate an increased frequency of plasmid transfer in bacteria associated with microplastics compared to bacteria that are free-living or in natural aggregates. Moreover, comparison of communities grown on polycarbonate filters showed that increased gene exchange occurs in a broad range of phylogenetically-diverse bacteria. Our results indicate horizontal gene transfer in this habitat could distinctly affect the ecology of aquatic microbial communities on a global scale. The spread of antibiotic resistance through microplastics could also have profound consequences for the evolution of aquatic bacteria and poses a neglected hazard for human health.},
  language  = {en}
}