@incollection{Zimmermann2015, author = {Zimmermann, Andreas}, title = {Artikel 199 (Zwecke der Assoziierung)}, series = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, volume = {Bd. 4}, booktitle = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, editor = {von der Groeben, Hans and Schwarze, J{\"u}rgen and Hatje, Armin}, edition = {7. Aufl.}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8329-6019-3}, publisher = {Universit{\"a}t Potsdam}, pages = {248 -- 249}, year = {2015}, language = {de} } @incollection{Zimmermann2015, author = {Zimmermann, Andreas}, title = {Artikel 198 (Ziele der Assoziierung)}, series = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, volume = {Bd. 4}, booktitle = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, editor = {von der Groeben, Hans and Schwarze, J{\"u}rgen and Hatje, Armin}, edition = {7. Aufl.}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8329-6019-3}, publisher = {Universit{\"a}t Potsdam}, pages = {244 -- 247}, year = {2015}, language = {de} } @incollection{Zimmermann2015, author = {Zimmermann, Andreas}, title = {Artikel 212 (Grunds{\"a}tze der Zusammenarbeit mit Nichtentwicklungsl{\"a}ndern)}, series = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, volume = {Bd. 4}, booktitle = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, editor = {von der Groeben, Hans and Schwarze, J{\"u}rgen and Hatje, Armin}, edition = {7. Aufl.}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8329-6019-3}, publisher = {Universit{\"a}t Potsdam}, pages = {399 -- 403}, year = {2015}, language = {de} } @incollection{Zimmermann2015, author = {Zimmermann, Andreas}, title = {Artikel 208 (Beitrag der Union; Ziel)}, series = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, volume = {4}, booktitle = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, editor = {von der Groeben, Hans and Schwarze, J{\"u}rgen and Hatje, Armin}, edition = {7. Aufl.}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8329-6019-3}, publisher = {Universit{\"a}t Potsdam}, pages = {352 -- 376}, year = {2015}, language = {de} } @incollection{Zimmermann2015, author = {Zimmermann, Andreas}, title = {Artikel 210 (Koordinierung)}, series = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, volume = {Bd. 4}, booktitle = {Europ{\"a}isches Unionsrecht : Vertrag {\"u}ber die Europ{\"a}ische Union Vertrag {\"u}ber die Arbeitsweise der Europ{\"a}ischen Union, Charta der Grundrechte der Europ{\"a}ischen Union ; EUV, AEUV, GRC}, editor = {von der Groeben, Hans and Schwarze, J{\"u}rgen and Hatje, Armin}, edition = {7. Aufl.}, publisher = {Nomos}, address = {Baden-Baden}, isbn = {978-3-8329-6019-3}, publisher = {Universit{\"a}t Potsdam}, pages = {396 -- 397}, year = {2015}, language = {de} } @article{ZimmermannUberZimmermannetal.2015, author = {Zimmermann, Alexander and Uber, Magdalena and Zimmermann, Beate and Levia, Delphis F.}, title = {Predictability of stemflow in a species-rich tropical forest}, series = {Hydrological processes}, volume = {29}, journal = {Hydrological processes}, number = {23}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {0885-6087}, doi = {10.1002/hyp.10554}, pages = {4947 -- 4956}, year = {2015}, abstract = {Numerous studies investigated the influence of abiotic (meteorological conditions) and biotic factors (tree characteristics) on stemflow generation. Although these studies identified the variables that influence stemflow volumes in simply structured forests, the combination of tree characteristics that allows a robust prediction of stemflow volumes in species-rich forests is not well known. Many hydrological applications, however, require at least a rough estimate of stemflow volumes based on the characteristics of a forest stand. The need for robust predictions of stemflow motivated us to investigate the relationships between tree characteristics and stemflow volumes in a species-rich tropical forest located in central Panama. Based on a sampling setup consisting of ten rainfall collectors, 300 throughfall samplers and 60 stemflow collectors and cumulated data comprising 26 rain events, we derive three main findings. Firstly, stemflow represents a minor hydrological component in the studied 1-ha forest patch (1.0\% of cumulated rainfall). Secondly, in the studied species-rich forest, single tree characteristics are only weakly related to stemflow volumes. The influence of multiple tree parameters (e.g. crown diameter, presence of large epiphytes and inclination of branches) and the dependencies among these parameters require a multivariate approach to understand the generation of stemflow. Thirdly, predicting stemflow in species-rich forests based on tree parameters is a difficult task. Although our best model can capture the variation in stemflow to some degree, a critical validation reveals that the model cannot provide robust predictions of stemflow. A reanalysis of data from previous studies in species-rich forests corroborates this finding. Based on these results and considering that for most hydrological applications, stemflow is only one parameter among others to estimate, we advocate using the base model, i.e. the mean of the stemflow data, to quantify stemflow volumes for a given study area. Studies in species-rich forests that wish to obtain predictions of stemflow based on tree parameters probably need to conduct a much more extensive sampling than currently implemented by most studies. Copyright (c) 2015 John Wiley \& Sons, Ltd.}, language = {en} } @article{ZieglerReiterHeidbachetal.2015, author = {Ziegler, Moritz O. and Reiter, Karsten and Heidbach, Oliver and Zang, Arno and Kwiatek, Grzegorz and Stromeyer, Dietrich and Dahm, Torsten and Dresen, Georg and Hofmann, Gerhard}, title = {Mining-Induced Stress Transfer and Its Relation to a 1.9 Seismic Event in an Ultra-deep South African Gold Mine}, series = {Pure and applied geophysics}, volume = {172}, journal = {Pure and applied geophysics}, number = {10}, publisher = {Springer}, address = {Basel}, issn = {0033-4553}, doi = {10.1007/s00024-015-1033-x}, pages = {2557 -- 2570}, year = {2015}, abstract = {On 27 December 2007, a 1.9 seismic event occurred within a dyke in the deep-level Mponeng Gold Mine, South Africa. From the seismological network of the mine and the one from the Japanese-German Underground Acoustic Emission Research in South Africa (JAGUARS) group, the hypocentral depth (3,509 m), focal mechanism and aftershock location were estimated. Since no mining activity took place in the days before the event, dynamic triggering due to blasting can be ruled out as the cause. To investigate the hypothesis that stress transfer, due to excavation of the gold reef, induced the event, we set up a small-scale high-resolution three-dimensional (3D) geomechanical numerical model. The model consisted of the four different rock units present in the mine: quartzite (footwall), hard lava (hanging wall), conglomerate (gold reef) and diorite (dykes). The numerical solution was computed using a finite-element method with a discretised mesh of approximately elements. The initial stress state of the model is in agreement with in situ data from a neighbouring mine, and the step-wise excavation was simulated by mass removal from the gold reef. The resulting 3D stress tensor and its changes due to mining were analysed based on the Coulomb failure stress changes on the fault plane of the event. The results show that the seismic event was induced regardless of how the Coulomb failure stress changes were calculated and of the uncertainties in the fault plane solution. We also used the model to assess the seismic hazard due to the excavation towards the dyke. The resulting curve of stress changes shows a significant increase in the last in front of the dyke, indicating that small changes in the mining progress towards the dyke have a substantial impact on the stress transfer.}, language = {en} } @article{ZhouZhangGuietal.2015, author = {Zhou, Ying and Zhang, Ling and Gui, Jiadong and Dong, Fang and Cheng, Sihua and Mei, Xin and Zhang, Linyun and Li, Yongqing and Su, Xinguo and Baldermann, Susanne and Watanabe, Naoharu and Yang, Ziyin}, title = {Molecular Cloning and Characterization of a Short-Chain Dehydrogenase Showing Activity with Volatile Compounds Isolated from Camellia sinensis}, series = {Plant molecular biology reporter}, volume = {33}, journal = {Plant molecular biology reporter}, number = {2}, publisher = {Springer}, address = {New York}, issn = {0735-9640}, doi = {10.1007/s11105-014-0751-z}, pages = {253 -- 263}, year = {2015}, abstract = {Camellia sinensis synthesizes and emits a large variety of volatile phenylpropanoids and benzenoids (VPB). To investigate the enzymes involved in the formation of these VPB compounds, a new C. sinensis short-chain dehydrogenase/reductase (CsSDR) was isolated, cloned, sequenced, and functionally characterized. The complete open reading frame of CsSDR contains 996 nucleotides with a calculated protein molecular mass of 34.5 kDa. The CsSDR recombinant protein produced in Escherichia coli exhibited dehydrogenase-reductase activity towards several major VPB compounds in C. sinensis flowers with a strong preference for NADP/NADPH co-factors, and showed affinity for (R)/(S)-1-phenylethanol (1PE), phenylacetaldehyde, benzaldehyde, and benzyl alcohol, and no affinity for acetophenone (AP) and 2-phenylethanol. CsSDR showed the highest catalytic efficiency towards (R)/(S)-1PE. Furthermore, the transient expression analysis in Nicotiana benthamiana plants validated that CsSDR could convert 1PE to AP in plants. CsSDR transcript level was not significantly affected by floral development and some jasmonic acid-related environmental stress, and CsSDR transcript accumulation was detected in most floral tissues such as receptacle and anther, which were main storage locations of VPB compounds. Our results indicate that CsSDR is expressed in C. sinensis flowers and is likely to contribute to a number of floral VPB compounds including the 1PE derivative AP.}, language = {en} } @article{ZhouChenDongetal.2015, author = {Zhou, Xiqiang and Chen, Daizhao and Dong, Shaofeng and Zhang, Yanqiu and Guo, Zenghui and Wei, Hengye and Yu, Hao}, title = {Diagenetic barite deposits in the Yurtus Formation in Tarim Basin, NW China: Implications for barium and sulfur cycling in the earliest Cambrian}, series = {Precambrian research}, volume = {263}, journal = {Precambrian research}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0301-9268}, doi = {10.1016/j.precamres.2015.03.006}, pages = {79 -- 87}, year = {2015}, abstract = {Barite concretions and bands are widely distributed in black shale-chert horizons in the Yurtus Formation of Lower Cambrian in Aksu area, northwestern Tarim Basin, NW China. They mainly consist of coarse-grained anhedral to euhedral barite crystals with minor dolomites and pyrites. Petrological features indicate these concretions grew from the porewater in unconsolidated sediments at shallow burial below sediment-water interface. The slight deviation of Sr-87/Sr-86 ratios (0.7083 to 0.7090) and significant elevated delta S-34 values (56.8-76.4 parts per thousand CDT) of barite samples with respect to those of the Early Cambrian seawater further support that barite deposits precipitated from the enclosed porewater in sediment column, which evolved from the penecontemporaneous seawater with weak interaction with the host fine-grained siliciclastic sediments and highly-depleted sulfate in response to prolonged strong bacterial sulfate reduction without necessary renewal. The abundant organic matters in the basal Yurtus Formation should have facilitated developing sulfate-depleted methanogenesis zone and sulfate-methane transition zone (SMTZ) slightly after deposition. Therefore, barite deposits in the Yurtus Formation most likely resulted from diagenetic barium cycling and persistently grew from the porewater in the static SMTZ with a low sedimentation rate in the Early Cambrian. In comparison with the distribution of sedimentary barites in geological records, we tentatively proposed that a transition in diagenetic barium cycling and associated mineralization may have occurred from the Precambrian to Cambrian periods; this scenario may be causally linked to the changes in marine ecology (the advent of mesozooplankton and associated faecal pellet) and geochemistry (the increase of seawater sulfate concentration). Thus, the occurrence of diagenetic barite deposits in the Yurtus Formation implies that diagenetic barium cycling and more effective scavenging of barium from CH4- and Ba-rich porewaters within sediments might have become an nonnegligible process in continental margin areas, at least, since the earliest Cambrian, which could have significantly impacted the marine barium cycling. (C) 2015 Elsevier B.V. All rights reserved.}, language = {en} } @article{ZhongMetwalliRawolleetal.2015, author = {Zhong, Qi and Metwalli, Ezzeldin and Rawolle, Monika and Kaune, Gunar and Bivigou Koumba, Achille Mayelle and Laschewsky, Andr{\´e} and Papadakis, Christine M. and Cubitt, Robert and M{\"u}ller-Buschbaum, Peter}, title = {Rehydration of Thermoresponsive Poly(monomethoxydiethylene glycol acrylate) Films Probed in Situ by Real-Time Neutron Reflectivity}, series = {Macromolecules : a publication of the American Chemical Society}, volume = {48}, journal = {Macromolecules : a publication of the American Chemical Society}, number = {11}, publisher = {American Chemical Society}, address = {Washington}, issn = {0024-9297}, doi = {10.1021/acs.macromol.5b00645}, pages = {3604 -- 3612}, year = {2015}, abstract = {The rehydration of thermoresponsive poly(monomethoxydiethylene glycol acrylate) (PMDEGA) films exhibiting a lower critical solution temperature (LCST) type demixing phase transition in aqueous environments, induced by a decrease in temperature, is investigated in situ with real-time neutron reflectivity. Two different starting conditions (collapsed versus partially swollen chain conformation) are compared. In one experiment, the temperature is reduced from above the demixing temperature to well below the demixing temperature. In a second experiment, the starting temperature is below the demixing temperature, but within the transition regime, and reduced to the same final temperature. In both cases, the observed rehydration process can be divided into three stages: first condensation of water from the surrounding atmosphere, then absorption of water by the PMDEGA film and evaporation of excess water, and finally, rearrangement of the PMDEGA chains. The final rehydrated film is thicker and contains more absorbed water as compared with the initially swollen film at the same temperature well below the demixing temperature.}, language = {en} } @phdthesis{Zhao2015, author = {Zhao, Liming}, title = {Characterization genes involved in leaf development and senescence of arabidopsis}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2015}, language = {en} } @article{ZhangChenZhouetal.2015, author = {Zhang, Yanqiu and Chen, Daizhao and Zhou, Xiqiang and Guo, Zenghui and Wei, Wenwen and Mutti, Maria}, title = {Depositional facies and stratal cyclicity of dolomites in the Lower Qiulitag Group (Upper Cambrian) in northwestern Tarim Basin, NW China}, series = {Facies : an international journal of palaeontology, sedimentology, geology}, volume = {61}, journal = {Facies : an international journal of palaeontology, sedimentology, geology}, number = {1}, publisher = {Springer}, address = {New York}, issn = {0172-9179}, doi = {10.1007/s10347-014-0417-1}, pages = {24}, year = {2015}, abstract = {The Upper Cambrian Lower Qiulitag Group in the Tarim Basin, NW China, is overwhelmingly composed of cyclic dolomites. Based on extensive field investigations and facies analysis from four outcrop sections in the Bachu-Keping area, northwestern Tarim Basin, four main types of facies are recognized: open-marine subtidal, restricted shallow subtidal, intertidal, and supratidal facies, and these are further subdivided into ten lithofacies. In general, these facies are vertically arranged into shallowing-upward, metre-scale cycles. These cycles are commonly composed of a thin basal horizon reflecting abrupt deepening, and a thicker upper succession showing gradual shallowing upwards. Based on the vertical facies arrangements and changes across boundary surfaces, two types of cycle: peritidal and shallow subtidal cycle, are further identified. The peritidal cycles, predominating over the lower-middle Lower Qiulitag Group, commence with shallow subtidal to lower intertidal facies and are capped by inter-supratidal facies. In contrast, the shallow subtidal cycles, dominating the upper Lower Qiulitag Group, are capped by shallow-subtidal facies. Based on vertical lithofacies variations, cycle stacking patterns, and accommodation variations revealed by Fischer plots, six larger-scale third-order depositional sequences (Sq1-Sq6) are recognized. These sequences generally consist of a lower transgressive and an upper regressive systems tract. The transgressive tracts are dominated by thicker-than-average cycles, indicating an overall accommodation increase, whereas the regressive tracts are characterized by thinner-than-average peritidal cycles, indicating an overall accommodation decrease. The sequence boundaries are characterized by transitional zones of stacked thinner-than-average cycles, rather than by a single surface. These sequences can further be grouped into lower-order sequence sets: the lower and upper sequence sets. The lower sequence set, including Sq1-Sq3, is characterized by peritidal facies-dominated sequences and a progressive decrease in accommodation space, indicating a longer-term fall in sea level. In contrast, the upper sequence set (Sq4-Sq6) is characterized by subtidal facies-dominated sequences and a progressive increase in accommodation space, indicating a longer-term rise in sea level.}, language = {en} } @article{ZhangSauterFangetal.2015, author = {Zhang, Quanchao and Sauter, Tilman and Fang, Liang and Kratz, Karl and Lendlein, Andreas}, title = {Shape-Memory Capability of Copolyetheresterurethane Microparticles Prepared via Electrospraying}, series = {Macromolecular materials and engineering}, volume = {300}, journal = {Macromolecular materials and engineering}, number = {5}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1438-7492}, doi = {10.1002/mame.201400267}, pages = {522 -- 530}, year = {2015}, abstract = {Multifunctional thermo-responsive and degradable microparticles exhibiting a shapememory effect (SME) have attracted widespread interest in biomedicine as switchable delivery vehicles or microactuators. In this work almost spherical solid microparticles with an average diameter of 3.9 +/- 0.9 mm are prepared via electrospraying of a copolyetheresterurethane named PDC, which is composed of crystallizable oligo(p-dioxanone) (OPDO) hard and oligo(e-caprolactone) (OCL) switching segments. The PDC microparticles are programmed via compression at different pressures and their shapememory capability is explored by off-line and online heating experiments. When a low programming pressure of 0.2 MPa is applied a pronounced thermally-induced shape-memory effect is achieved with a shape recovery ratio about 80\%, while a high programming pressure of 100 MPa resulted in a weak shape-memory performance. Finally, it is demonstrated that an array of PDC microparticles deposited on a polypropylene (PP) substrate can be successfully programmed into a smart temporary film, which disintegrates upon heating to 60 degrees C.}, language = {en} } @article{ZhangHankeGogokhiaJiangetal.2015, author = {Zhang, Houbin and Hanke-Gogokhia, Christin and Jiang, Li and Li, Xiaobo and Wang, Pu and Gerstner, Cecilia D. and Frederick, Jeanne M. and Yang, Zhenglin and Baehr, Wolfgang}, title = {Mistrafficking of prenylated proteins causes retinitis pigmentosa 2}, series = {The FASEB journal : the official journal of the Federation of American Societies for Experimental Biology}, volume = {29}, journal = {The FASEB journal : the official journal of the Federation of American Societies for Experimental Biology}, number = {3}, publisher = {Federation of American Societies for Experimental Biology}, address = {Bethesda}, issn = {0892-6638}, doi = {10.1096/fj.14-257915}, pages = {932 -- 942}, year = {2015}, abstract = {The retinitis pigmentosa 2 polypeptide (RP2) functions as a GTPase-activating protein (GAP) for ARL3 (Arf-like protein 3), a small GTPase. ARL3 is an effector of phosphodiesterase 6 Delta (PDE6D), a prenyl-binding protein and chaperone of prenylated protein in photoreceptors. Mutations in the human RP2 gene cause X-linked retinitis pigmentosa (XLRP) and cone-rod dystrophy (XL-CORD). To study mechanisms causing XLRP, we generated an RP2 knockout mouse. The RP2h(-/-) mice exhibited a slowly progressing rod-cone dystrophy simulating the human disease. RP2h(-/-) scotopic a-wave and photopic b-wave amplitudes declined at 1 mo of age and continued to decline over the next 6 mo. Prenylated PDE6 subunits and G-protein coupled receptor kinase 1 (GRK1) were unable to traffic effectively to the RP2h(-/-) outer segments. Mechanistically, absence of RP2 GAP activity increases ARL3-GTP levels, forcing PDE6D to assume a predominantly "closed" conformation that impedes binding of lipids. Lack of interaction disrupts trafficking of PDE6 and GRK1 to their destination, the photoreceptor outer segments. We propose that hyperactivity of ARL3-GTP in RP2 knockout mice and human patients with RP2 null alleles leads to XLRP resembling recessive rod-cone dystrophy.}, language = {en} } @article{ZhangChenBoettcheretal.2015, author = {Zhang, Haocheng and Chen, Xuhui and B{\"o}ttcher, Markus and Guo, Fan and Li, Hui}, title = {Polarization swings reveal magnetic energy dissipation in blazars}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {804}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {1}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/804/1/58}, pages = {11}, year = {2015}, abstract = {The polarization signatures of blazar emissions are known to be highly variable. In addition to small fluctuations of the polarization angle around a mean value, large (greater than or similar to 180 degrees) polarization angle swings are sometimes observed. We suggest that such phenomena can be interpreted as arising from light travel time effects within an underlying axisymmetric emission region. We present the first simultaneous fitting of the multi-wavelength spectrum, variability, and time-dependent polarization features of a correlated optical and gamma-ray flaring event of the prominent blazar 3C279, which was accompanied by a drastic change in its polarization signatures. This unprecedented combination of spectral, variability, and polarization information in a coherent physical model allows us to place stringent constraints on the particle acceleration and magnetic field topology in the relativistic jet of a blazar, strongly favoring a scenario in which magnetic energy dissipation is the primary driver of the flare event.}, language = {en} } @article{ZhangLideGrijsetal.2015, author = {Zhang, Chaoli and Li, Chengyuan and de Grijs, Richard and Bekki, Kenji and Deng, Licai and Zaggia, Simone and Rubele, Stefano and Piatti, Andres E. and Cioni, Maria-Rosa L. and Emerson, Jim and For, Bi-Qing and Ripepi, Vincenzo and Marconi, Marcella and Ivanov, Valentin D. and Chen, Li}, title = {The vmc survey. XVIII. radial dependence of the Low-Mass, 0.55-0.82M(circle dot) stellar mass function in the galactic globular cluster 47 tucanae}, series = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, volume = {815}, journal = {The astrophysical journal : an international review of spectroscopy and astronomical physics}, number = {2}, publisher = {IOP Publ. Ltd.}, address = {Bristol}, issn = {0004-637X}, doi = {10.1088/0004-637X/815/2/95}, pages = {9}, year = {2015}, language = {en} } @article{ZerballLaschewskyvonKlitzing2015, author = {Zerball, Maximilian and Laschewsky, Andr{\´e} and von Klitzing, Regine}, title = {Swelling of Polyelectrolyte Multilayers: The Relation Between, Surface and Bulk Characteristics}, series = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, volume = {119}, journal = {The journal of physical chemistry : B, Condensed matter, materials, surfaces, interfaces \& biophysical chemistry}, number = {35}, publisher = {American Chemical Society}, address = {Washington}, issn = {1520-6106}, doi = {10.1021/acs.jpcb.5b04350}, pages = {11879 -- 11886}, year = {2015}, abstract = {The odd even effect, i.e., the influence of the outermost layer of polyelectrolyte multilayers (PEMs) on their swelling behavior, is investigated. For that purpose poly(styrene sodium sulfonate) (PSS)/poly(diallyl-dimethylammonium chloride) (PDADMAC) polyelectrolyte multilayers are studied in air with 1\% relative humidity (RH), 30\% RH, 95\% RH, and in liquid water by ellipsometry, atomic force microscopy (AFM), and X-ray reflectometry (XRR). Since the total amount of water uptake in swollen PEMs is divided into two fractions, the void water and the swelling water, a correct evaluation of the odd even effect is only possible if both fractions are examined separately. In order to allow measuring samples over a larger thickness regime the investigation of a larger amount of samples is required. Therefore, the concept of separating void water from swelling water using neutron reflectometry is for the first time transferred to ellipsometry. The subsequent analysis of swelling water, void water, and roughness revealed the existence of two types of odd even effects: an odd even effect which addresses only the surface of the PEM (surface-odd even effect) and an odd even effect which addresses also the bulk of the PEM (bulk-odd even effect). The appearance of both effects is dependent on the environment; the surface-odd even effect is only detectable in humid air while the bulk-odd even effect is only detectable in liquid water. The bulk-odd even effect is related to the osmotic pressure between the PEM and the surrounding water. A correlation between the amount of void water and both odd even effects is not found. The amount of void water is independent of the terminated layer and the thickness of PEMs.}, language = {en} } @article{ZengPankratovFalketal.2015, author = {Zeng, Ting and Pankratov, Dmitry and Falk, Magnus and Leimk{\"u}hler, Silke and Shleev, Sergey and Wollenberger, Ursula}, title = {Miniature direct electron transfer based sulphite/oxygen enzymatic fuel cells}, series = {Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics}, volume = {66}, journal = {Biosensors and bioelectronics : the principal international journal devoted to research, design development and application of biosensors and bioelectronics}, publisher = {Elsevier}, address = {Oxford}, issn = {0956-5663}, doi = {10.1016/j.bios.2014.10.080}, pages = {39 -- 42}, year = {2015}, abstract = {A direct electron transfer (DET) based sulphite/oxygen biofuel cell is reported that utilises human sulphite oxidase (hSOx) and Myrothecium verrucaria bilirubin oxidase (MvBOx) and nanostructured gold electrodes. For bioanode construction, the nanostructured gold microelectrodes were further modified with 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester) to which polyethylene imine was covalently attached. hSOx was adsorbed onto this chemically modified nanostructured electrode with high surface loading of electroactive enzyme and in presence of sulphite high anodic bioelectrocatalytic currents were generated with an onset potential of 0.05 V vs. NHE. The biocathode contained MyBOx directly adsorbed to the deposited gold nanoparticles for cathodic oxygen reduction starting at 0.71 V vs. NHE. Both enzyme electrodes were integrated to a DET-type biofuel cell. Power densities of 8 and 1 mu W cm(-2) were achieved at 0.15 V and 0.45 V of cell voltages, respectively, with the membrane based biodevices under aerobic conditions. (C) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @article{ZengLeimkuehlerKoetzetal.2015, author = {Zeng, Ting and Leimk{\"u}hler, Silke and Koetz, Joachim and Wollenberger, Ursula}, title = {Effective Electrochemistry of Human Sulfite Oxidase Immobilized on Quantum-Dots-Modified Indium Tin Oxide Electrode}, series = {ACS applied materials \& interfaces}, volume = {7}, journal = {ACS applied materials \& interfaces}, number = {38}, publisher = {American Chemical Society}, address = {Washington}, issn = {1944-8244}, doi = {10.1021/acsami.5b06665}, pages = {21487 -- 21494}, year = {2015}, abstract = {The bioelectrocatalytic sulfite oxidation by human sulfite oxidase (hSO) on indium tin oxide (ITO) is reported, which is facilitated by functionalizing of the electrode surface with polyethylenimine (PEI)-entrapped CdS nanoparticles and enzyme. hSO was assembled onto the electrode with a high surface loading of electroactive enzyme. In the presence of sulfite but without additional mediators, a high bioelectrocatalytic current was generated. Reference experiments with only PEI showed direct electron transfer and catalytic activity of hSO, but these were less pronounced. The application of the polyelectrolyte-entrapped quantum dots (QDs) on ITO electrodes provides a compatible surface for enzyme binding with promotion of electron transfer. Variations of the buffer solution conditions, e.g., ionic strength, pH, viscosity, and the effect of oxygen, were studied in order to understand intramolecular and heterogeneous electron transfer from hSO to the electrode. The results are consistent with a model derived for the enzyme by using flash photolysis in solution and spectroelectrochemistry and molecular dynamic simulations of hSO on monolayer-modified gold electrodes. Moreover, for the first time a photoelectrochemical electrode involving immobilized hSO is demonstrated where photoexcitation of the CdS/hSO-modified electrode lead to an enhanced generation of bioelectrocatalytic currents upon sulfite addition. Oxidation starts already at the redox potential of the electron transfer domain of hSO and is greatly increased by application of a small overpotential to the CdS/hSO-modified ITO.}, language = {en} } @article{ZehbeMochalesRadziketal.2015, author = {Zehbe, Rolf and Mochales, Carolina and Radzik, Daniela and Mueller, Wolf-Dieter and Fleck, Claudia}, title = {Electrophoretic deposition of multilayered (cubic and tetragonal stabilized) zirconia ceramics for adapted crack deflection}, series = {Journal of the European Ceramic Society}, volume = {36}, journal = {Journal of the European Ceramic Society}, number = {2}, publisher = {Elsevier}, address = {Oxford}, issn = {0955-2219}, doi = {10.1016/j.jeurceramsoc.2015.08.022}, pages = {357 -- 364}, year = {2015}, abstract = {The electrophoretic deposition process was used to produce multi-layered ceramics consisting of alternating layers of fully stabilized cubic zirconia and partially stabilized tetragonal zirconia to make use of their different mechanical behaviour, investigating the possibility to deflect advancing cracks at the interfaces of the different layers. This crack deflection is apparently impacted by a toughening mechanism only found in the tetragonal stabilized zirconia polymorph and is characterized by the stress induced transformation of the metastable tetragonal phase into the monoclinic one, which is accompanied by a volume increase resulting in a closing mechanism for advancing cracks. While improving the electrophoretic deposition process, we investigated the transformation toughening mechanism at the layer interfaces and their effect on crack propagation. Investigations involved a combination of different imaging methods, including light microscopy, white light interferometry, atomic force microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and Raman spectroscopy.}, language = {en} } @phdthesis{Zakharova2015, author = {Zakharova, Olga}, title = {Analysis and modeling of transient earthquake patterns and their dependence on local stress regimes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-86455}, school = {Universit{\"a}t Potsdam}, pages = {XVI, 94}, year = {2015}, abstract = {Investigations in the field of earthquake triggering and associated interactions, which includes aftershock triggering as well as induced seismicity, is important for seismic hazard assessment due to earthquakes destructive power. One of the approaches to study earthquake triggering and their interactions is the use of statistical earthquake models, which are based on knowledge of the basic seismicity properties, in particular, the magnitude distribution and spatiotemporal properties of the triggered events. In my PhD thesis I focus on some specific aspects of aftershock properties, namely, the relative seismic moment release of the aftershocks with respect to the mainshocks; the spatial correlation between aftershock occurrence and fault deformation; and on the influence of aseismic transients on the aftershock parameter estimation. For the analysis of aftershock sequences I choose a statistical approach, in particular, the well known Epidemic Type Aftershock Sequence (ETAS) model, which accounts for the input of background and triggered seismicity. For my specific purposes, I develop two ETAS model modifications in collaboration with Sebastian Hainzl. By means of this approach, I estimate the statistical aftershock parameters and performed simulations of aftershock sequences as well. In the case of seismic moment release of aftershocks, I focus on the ratio of cumulative seismic moment release with respect to the mainshocks. Specifically, I investigate the ratio with respect to the focal mechanism of the mainshock and estimate an effective magnitude, which represents the cumulative aftershock energy (similar to Bath's law, which defines the average difference between mainshock and the largest aftershock magnitudes). Furthermore, I compare the observed seismic moment ratios with the results of the ETAS simulations. In particular, I test a restricted ETAS (RETAS) model which is based on results of a clock advanced model and static stress triggering. To analyze spatial variations of triggering parameters I focus in my second approach on the aftershock occurrence triggered by large mainshocks and the study of the aftershock parameter distribution and their spatial correlation with the coseismic/postseismic slip and interseismic locking. To invert the aftershock parameters I improve the modified ETAS (m-ETAS) model, which is able to take the extension of the mainshock rupture into account. I compare the results obtained by the classical approach with the output of the m-ETAS model. My third approach is concerned with the temporal clustering of seismicity, which might not only be related to earthquake-earthquake interactions, but also to a time-dependent background rate, potentially biasing the parameter estimations. Thus, my coauthors and I also applied a modification of the ETAS model, which is able to take into account time-dependent background activity. It can be applicable for two different cases: when an aftershock catalog has a temporal incompleteness or when the background seismicity rate changes with time, due to presence of aseismic forces. An essential part of any research is the testing of the developed models using observational data sets, which are appropriate for the particular study case. Therefore, in the case of seismic moment release I use the global seismicity catalog. For the spatial distribution of triggering parameters I exploit two aftershock sequences of the Mw8.8 2010 Maule (Chile) and Mw 9.0 2011 Tohoku (Japan) mainshocks. In addition, I use published geodetic slip models of different authors. To test our ability to detect aseismic transients my coauthors and I use the data sets from Western Bohemia (Central Europe) and California. Our results indicate that: (1) the seismic moment of aftershocks with respect to mainshocks depends on the static stress changes and is maximal for the normal, intermediate for thrust and minimal for strike-slip stress regimes, where the RETAS model shows a good correspondence with the results; (2) The spatial distribution of aftershock parameters, obtained by the m-ETAS model, shows anomalous values in areas of reactivated crustal fault systems. In addition, the aftershock density is found to be correlated with coseismic slip gradient, afterslip, interseismic coupling and b-values. Aftershock seismic moment is positively correlated with the areas of maximum coseismic slip and interseismically locked areas. These correlations might be related to the stress level or to material properties variations in space; (3) Ignoring aseismic transient forcing or temporal catalog incompleteness can lead to the significant under- or overestimation of the underlying trigger parameters. In the case when a catalog is complete, this method helps to identify aseismic sources.}, language = {en} } @article{ZajnulinaBoehmBlowetal.2015, author = {Zajnulina, Marina and B{\"o}hm, Michael and Blow, K. and Rieznik, A. A. and Giannone, Domenico and Haynes, Roger and Roth, Martin M.}, title = {Soliton radiation beat analysis of optical pulses generated from two continuous-wave lasers}, series = {Chaos : an interdisciplinary journal of nonlinear science}, volume = {25}, journal = {Chaos : an interdisciplinary journal of nonlinear science}, number = {10}, publisher = {American Institute of Physics}, address = {Melville}, issn = {1054-1500}, doi = {10.1063/1.4930316}, pages = {6}, year = {2015}, abstract = {We propose a fibre-based approach for generation of optical frequency combs (OFCs) with the aim of calibration of astronomical spectrographs in the low and medium-resolution range. This approach includes two steps: in the first step, an appropriate state of optical pulses is generated and subsequently moulded in the second step delivering the desired OFC. More precisely, the first step is realised by injection of two continuous-wave (CW) lasers into a conventional single-mode fibre, whereas the second step generates a broad OFC by using the optical solitons generated in step one as initial condition. We investigate the conversion of a bichromatic input wave produced by two initial CW lasers into a train of optical solitons, which happens in the fibre used as step one. Especially, we are interested in the soliton content of the pulses created in this fibre. For that, we study different initial conditions (a single cosine-hump, an Akhmediev breather, and a deeply modulated bichromatic wave) by means of soliton radiation beat analysis and compare the results to draw conclusion about the soliton content of the state generated in the first step. In case of a deeply modulated bichromatic wave, we observed the formation of a collective soliton crystal for low input powers and the appearance of separated solitons for high input powers. An intermediate state showing the features of both, the soliton crystal and the separated solitons, turned out to be most suitable for the generation of OFC for the purpose of calibration of astronomical spectrographs.}, language = {en} } @article{ZajnulinaBoggioBoehmetal.2015, author = {Zajnulina, Marina and Boggio, Jose M. Chavez and B{\"o}hm, Michael and Rieznik, A. A. and Fremberg, Tino and Haynes, Roger and Roth, Martin M.}, title = {Generation of optical frequency combs via four-wave mixing processes for low- and medium-resolution astronomy}, series = {Applied physics : B, Lasers and optics}, volume = {120}, journal = {Applied physics : B, Lasers and optics}, number = {1}, publisher = {Springer}, address = {New York}, issn = {0946-2171}, doi = {10.1007/s00340-015-6121-1}, pages = {171 -- 184}, year = {2015}, abstract = {We investigate the generation of optical frequency combs through a cascade of four-wave mixing processes in nonlinear fibres with optimised parameters. The initial optical field consists of two continuous-wave lasers with frequency separation larger than 40 GHz (312.7 pm at 1531 nm). It propagates through three nonlinear fibres. The first fibre serves to pulse shape the initial sinusoidal-square pulse, while a strong pulse compression down to sub-100 fs takes place in the second fibre which is an amplifying erbium-doped fibre. The last stage is a low-dispersion highly nonlinear fibre where the frequency comb bandwidth is increased and the line intensity is equalised. We model this system using the generalised nonlinear Schrodinger equation and investigate it in terms of fibre lengths, fibre dispersion, laser frequency separation and input powers with the aim to minimise the frequency comb noise. With the support of the numerical results, a frequency comb is experimentally generated, first in the near infra-red and then it is frequency-doubled into the visible spectral range. Using a MUSE-type spectrograph, we evaluate the comb performance for astronomical wavelength calibration in terms of equidistancy of the comb lines and their stability.}, language = {en} } @phdthesis{Zajnulina2015, author = {Zajnulina, Marina}, title = {Optical frequency comb generation in optical fibres}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88776}, school = {Universit{\"a}t Potsdam}, pages = {xii, 103}, year = {2015}, abstract = {Optical frequency combs (OFC) constitute an array of phase-correlated equidistant spectral lines with nearly equal intensities over a broad spectral range. The adaptations of combs generated in mode-locked lasers proved to be highly efficient for the calibration of high-resolution (resolving power > 50000) astronomical spectrographs. The observation of different galaxy structures or the studies of the Milky Way are done using instruments in the low- and medium resolution range. To such instruments belong, for instance, the Multi Unit Spectroscopic Explorer (MUSE) being developed for the Very Large Telescope (VLT) of the European Southern Observatory (ESO) and the 4-metre Multi-Object Spectroscopic Telescope (4MOST) being in development for the ESO VISTA 4.1 m Telescope. The existing adaptations of OFC from mode-locked lasers are not resolvable by these instruments. Within this work, a fibre-based approach for generation of OFC specifically in the low- and medium resolution range is studied numerically. This approach consists of three optical fibres that are fed by two equally intense continuous-wave (CW) lasers. The first fibre is a conventional single-mode fibre, the second one is a suitably pumped amplifying Erbium-doped fibre with anomalous dispersion, and the third one is a low-dispersion highly nonlinear optical fibre. The evolution of a frequency comb in this system is governed by the following processes: as the two initial CW-laser waves with different frequencies propagate through the first fibre, they generate an initial comb via a cascade of four-wave mixing processes. The frequency components of the comb are phase-correlated with the original laser lines and have a frequency spacing that is equal to the initial laser frequency separation (LFS), i.e. the difference in the laser frequencies. In the time domain, a train of pre-compressed pulses with widths of a few pico-seconds arises out of the initial bichromatic deeply-modulated cosine-wave. These pulses undergo strong compression in the subsequent amplifying Erbium-doped fibre: sub-100 fs pulses with broad OFC spectra are formed. In the following low-dispersion highly nonlinear fibre, the OFC experience a further broadening and the intensity of the comb lines are fairly equalised. This approach was mathematically modelled by means of a Generalised Nonlinear Schr{\"o}dinger Equation (GNLS) that contains terms describing the nonlinear optical Kerr effect, the delayed Raman response, the pulse self-steepening, and the linear optical losses as well as the wavelength-dependent Erbium gain profile for the second fibre. The initial condition equation being a deeply-modulated cosine-wave mimics the radiation of the two initial CW lasers. The numerical studies are performed with the help of Matlab scripts that were specifically developed for the integration of the GNLS and the initial condition according to the proposed approach for the OFC generation. The scripts are based on the Fourth-Order Runge-Kutta in the Interaction Picture Method (RK4IP) in combination with the local error method. This work includes the studies and results on the length optimisation of the first and the second fibre depending on different values of the group-velocity dispersion of the first fibre. Such length optimisation studies are necessary because the OFC have the biggest possible broadband and exhibit a low level of noise exactly at the optimum lengths. Further, the optical pulse build-up in the first and the second fibre was studied by means of the numerical technique called Soliton Radiation Beat Analysis (SRBA). It was shown that a common soliton crystal state is formed in the first fibre for low laser input powers. The soliton crystal continuously dissolves into separated optical solitons as the input power increases. The pulse formation in the second fibre is critically dependent on the features of the pulses formed in the first fibre. I showed that, for low input powers, an adiabatic soliton compression delivering low-noise OFC occurs in the second fibre. At high input powers, the pulses in the first fibre have more complicated structures which leads to the pulse break-up in the second fibre with a subsequent degradation of the OFC noise performance. The pulse intensity noise studies that were performed within the framework of this thesis allow making statements about the noise performance of an OFC. They showed that the intensity noise of the whole system decreases with the increasing value of LFS.}, language = {en} } @phdthesis{Zaccarella2015, author = {Zaccarella, Emiliano}, title = {Breaking down complexity}, series = {MPI series human cognitive and brain sciences ; 175}, journal = {MPI series human cognitive and brain sciences ; 175}, publisher = {Max-Planck-Institute}, address = {Leipzig}, isbn = {978-3-941504-60-8}, school = {Universit{\"a}t Potsdam}, pages = {217}, year = {2015}, abstract = {The unbounded expressive capacity of human language cannot boil down to an infinite list of sentences stored in a finite brain. Our linguistic knowledge is rather grounded around a rule-based universal syntactic computation—called Merge—which takes categorized units in input (e.g. this and ship), and generates structures by binding words recursively into more complex hierarchies of any length (e.g. this ship; this ship sinks…). Here we present data from different fMRI datasets probing the cortical implementation of this fundamental process. We first pushed complexity down to a three-word level, to explore how Merge creates minimally hierarchical phrases and sentences. We then moved to the most fundamental two-word level, to directly assess the universal invariant nature of Merge, when no additive mechanisms are involved. Our most general finding is that Merge as the basic syntactic operation is primarily performed by confined area, namely BA 44 in the IFG. Activity reduces to its most ventral-anterior portion at the most fundamental level, following fine-grained sub-anatomical parcellation proposed for the region. The deep frontal operculum/anterior-dorsal insula (FOP/adINS), a phylogenetically older and less specialized region, rather appears to support word-accumulation processing in which the categorical information of the word is first accessed based on its lexical status, and then maintained on hold before further processing takes place. The present data confirm the general notion of BA 44 being activated as a function of complex structural hierarchy, but they go beyond this view by proposing that structural sensitivity in BA 44 is already appreciated at the lowest levels of complexity during which minimal phrase-structures are build up, and syntactic Merge is assessed. Further, they call for a redefinition of BA 44 from multimodal area to a macro-region with internal localizable functional profiles}, language = {en} } @phdthesis{Yuan2015, author = {Yuan, Jiayin}, title = {Poly(Ionic Liquid)s}, school = {Universit{\"a}t Potsdam}, pages = {300}, year = {2015}, language = {en} } @misc{YokoyamaLeimkuehler2015, author = {Yokoyama, Kenichi and Leimk{\"u}hler, Silke}, title = {The role of FeS clusters for molybdenum cofactor biosynthesis and molybdoenzymes in bacteria}, series = {Biochimica et biophysica acta : Molecular cell research}, volume = {1853}, journal = {Biochimica et biophysica acta : Molecular cell research}, number = {6}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0167-4889}, doi = {10.1016/j.bbamcr.2014.09.021}, pages = {1335 -- 1349}, year = {2015}, abstract = {The biosynthesis of the molybdenum cofactor (Moco) has been intensively studied, in addition to its insertion into molybdoenzymes. In particular, a link between the assembly of molybdoenzymes and the biosynthesis of FeS clusters has been identified in the recent years: 1) the synthesis of the first intermediate in Moco biosynthesis requires an FeS-cluster containing protein, 2) the sulfurtransferase for the dithiolene group in Moco is also involved in the synthesis of FeS clusters, thiamin and thiolated tRNAs, 3) the addition of a sulfido-ligand to the molybdenum atom in the active site additionally involves a sulfurtransferase, and 4) most molybdoenzymes in bacteria require FeS clusters as redox active cofactors. In this review we will focus on the biosynthesis of the molybdenum cofactor in bacteria, its modification and insertion into molybdoenzymes, with an emphasis to its link to FeS cluster biosynthesis and sulfur transfer. (C) 2014 Elsevier B.V. All rights reserved.}, language = {en} } @article{YinRajkovicVeeduetal.2015, author = {Yin, Zhong and Rajkovic, Ivan and Veedu, Sreevidya Thekku and Deinert, Sascha and Raiser, Dirk and Jain, Rohit and Fukuzawa, Hironobu and Wada, Shin-ichi and Quevedo, Wilson and Kennedy, Brian and Schreck, Simon and Pietzsch, Annette and Wernet, Philippe and Ueda, Kyoshi and F{\"o}hlisch, Alexander and Techert, Simone}, title = {Ionic solutions probed by resonant inelastic X-ray scattering}, series = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics}, volume = {229}, journal = {Zeitschrift f{\"u}r physikalische Chemie : international journal of research in physical chemistry and chemical physics}, number = {10-12}, publisher = {De Gruyter}, address = {Berlin}, issn = {0942-9352}, doi = {10.1515/zpch-2015-0610}, pages = {1855 -- 1867}, year = {2015}, abstract = {X-ray spectroscopy is a powerful tool to study the local charge distribution of chemical systems. Together with the liquid jet it becomes possible to probe chemical systems in their natural environment, the liquid phase. In this work, we present X-ray absorption (XA), X-ray emission (XE) and resonant inelastic X-ray scattering (RIXS) data of pure water and various salt solutions and show the possibilities these methods offer to elucidate the nature of ion-water interaction.}, language = {en} } @article{YildirimSemerciBenayahuAdamovskietal.2015, author = {Yildirim-Semerci, Cigdem and Benayahu, Dafna and Adamovski, Miriam and Wollenberger, Ursula}, title = {An Electrochemical Assay for Monitoring Differentiation of the Osteoblastic Cell Line (MBA-15) on the Sensor Chip}, series = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, volume = {27}, journal = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, number = {6}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1040-0397}, doi = {10.1002/elan.201400684}, pages = {1350 -- 1358}, year = {2015}, abstract = {An electrochemical assay for the indication of the activity of the cell bound differentiation marker alkaline phosphatase (ALP) is proposed using voltammetry on an in-vitro cell culture. The basis of the assay is cultivation of cells on gold microelectrodes in wells of a microplate, catalytic hydrolysis of p-aminophenyl phosphate by ALP and indication of p-aminophenol oxidation by square wave voltammetry (SWV) with the sensors onto which the cells attached. The morphology of the bone marrow stromal cell line (MBA-15) on the electrode surface was investigated and it exhibited in vitro osteogenic characteristics. Since ALP is expressed on the cell surface in early differentiation stage of osteoblastic cells, its activity was followed after different culture times over a period of 144 h by recording repetitive voltammograms at different time points upon addition of the substrate p-aminophenyl phosphate. The ALP activity was estimated from the signal increase related to formation rate of p-aminophenol and the number of cells. The highest value was measured at 120 h, when the cells reached confluence. The results of the electrochemical activity assay are consistent with the colorimetric acquired value from p-nitrophenol formation rate.}, language = {en} } @misc{YarmanDechtriratBosserdtetal.2015, author = {Yarman, Aysu and Dechtrirat, Decha and Bosserdt, Maria and Jetzschmann, Katharina J. and Gajovic-Eichelmann, Nenad and Scheller, Frieder W.}, title = {Cytochrome c-derived hybrid systems based on moleculary imprinted polymers}, series = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, volume = {27}, journal = {Electroanalysis : an international journal devoted to fundamental and practical aspects of electroanalysis}, number = {3}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1040-0397}, doi = {10.1002/elan.201400592}, pages = {573 -- 586}, year = {2015}, abstract = {Hybrid architectures which combine a MIP with an immobilized affinity ligand or a biocatalyst sum up the advantages of both components. In this paper, hybrid architectures combining a layer of a molecularly imprinted electropolymer with a mini-enzyme or a self-assembled monolayer will be presented. (i) Microperoxidase-11 (MP-11) catalyzed oxidation of the drug aminopyrine on a product-imprinted sublayer: The peroxide dependent conversion of the analyte aminopyrine takes place in the MP-11 containing layer on top of a product-imprinted electropolymer on the indicator electrode. The hierarchical architecture resulted in the elimination of interfering signals for ascorbic acid and uric acid. An advantage of the new hierarchical structure is the separation of MIP formation by electropolymerization and immobilization of the catalyst. In this way it was for the first time possible to integrate an enzyme with a MIP layer in a sensor configuration. This combination has the potential to be transferred to other enzymes, e.g. P450, opening the way to clinically important analytes. (ii) Epitope-imprinted poly-scopoletin layer for binding of the C-terminal peptide and cytochrome c (Cyt c): The MIP binds both the target peptide and the parent protein almost eight times stronger than the non-imprinted polymer with affinities in the lower micromolar range. Exchange of only one amino acid in the peptide decreases the binding by a factor of five. (iii) MUA-poly-scopoletin MIP for cytochrome c: Cyt c bound to the MIP covered gold electrode exhibits direct electron transfer with a redox potential and rate constant typical for the native protein. The MIP cover layer suppresses the displacement of the target protein by BSA or myoglobin. The combination of protein imprinted polymers with an efficient electron transfer is a new concept for characterizing electroactive proteins such as Cyt c. The competition with other proteins shows that the MIP binds its target Cyt c preferentially and that molecular shape and the charge of protein determine the binding of interfering proteins.}, language = {en} } @article{YangDupontNivetJolivetetal.2015, author = {Yang, Wei and Dupont-Nivet, Guillaume and Jolivet, Marc and Guo, Zhaojie and Bougeois, Laurie and Bosboom, Roderic and Zhang, Ziya and Zhu, Bei and Heilbronn, Gloria}, title = {Magnetostratigraphic record of the early evolution of the southwestern Tian Shan foreland basin (Ulugqat area), interactions with Pamir indentation and India-Asia collision}, series = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, volume = {644}, journal = {Tectonophysics : international journal of geotectonics and the geology and physics of the interior of the earth}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0040-1951}, doi = {10.1016/j.tecto.2015.01.003}, pages = {122 -- 137}, year = {2015}, abstract = {The Tian Shan range is an inherited intracontinental structure reactivated by the far-field effects of the India-Asia collision. A growing body of thermochronology and magnetostratigraphy datasets shows that the range grew through several tectonic pulses since similar to 25 Ma, however the early Cenozoic history remains poorly constrained. The time-lag between the Eocene India-Asia collision and the Miocene onset of Tian Shan exhumation is particularly enigmatic. This peculiar period is potentially recorded along the southwestern Tian Shan piedmont. There, late Eocene marine deposits of the proto-Paratethys epicontinental sea transition to continental foreland basin sediments of unknown age were recently dated. We provide magnetostratigraphic dating of these continental sediments from the 1700-m-thick Mine section integrated with previously published detrital apatite fission track and U/Pb zircon ages. The most likely correlation to the geomagnetic polarity time scale indicates an age span from 20.8 to 13.3 Ma with a marked increase in accumulation rates at 19-18 Ma. This implies that the entire Oligocene period is missing between the last marine and first continental sediments, as suggested by previous southwestern Tian Shan results. This differs from the southwestern Tarim basin where Eocene marine deposits are continuously overlain by late Eocene-Oligocene continental sediments. This supports a simple evolution model of the western Tarim basin with Eocene-Oligocene foreland basin activation to the south related to northward thrusting of the Kunlun Shan, followed by early Miocene activation of northern foreland basin related to overthrusting of the south Tian Shan. Our data also support southward propagation of the Tian Shan piedmont from 20 to 18 Ma that may relate to motion on the Talas Fergana Fault. The coeval activation of a major right-lateral strike-slip system allowing indentation of the Pamir Salient into the Tarim basin, suggests far-field deformation from the India-Asia collision zone affected the Tian Shan and the Talas Fergana fault by early Miocene. (C) 2015 Elsevier B.V. All rights reserved.}, language = {en} } @article{YanFangNoecheletal.2015, author = {Yan, Wan and Fang, Liang and N{\"o}chel, Ulrich and Kratz, Karl and Lendlein, Andreas}, title = {Influence of deformation temperature on structural variation and shape-memory effect of a thermoplastic semi-crystalline multiblock copolymer}, series = {eXPRESS polymer letters}, volume = {9}, journal = {eXPRESS polymer letters}, number = {7}, publisher = {Budapest University of Technology and Economics, Department of Polymer Engineering}, address = {Budapest}, issn = {1788-618X}, doi = {10.3144/expresspolymlett.2015.58}, pages = {624 -- 635}, year = {2015}, abstract = {A multiblock copolymer termed as PCL-PIBMD, consisting of crystallizable poly(epsilon-caprolactone) (PCL) segments and crystallizable poly(3S-isobutyl-morpholine-2,5-dione) (PIBMD) segments, has been reported as a material showing a thermally-induced shape-memory effect. While PIBMD crystalline domains act as netpoints to determine the permanent shape, both PCL crystalline domains and PIBMD amorphous domains, which have similar transition temperatures (T-trans) can act as switching domains. In this work, the influence of the deformation temperature (T-deform = 50 or 20 degrees C), which was above or below T-trans, on the structural changes of PCL-PIBMD during uniaxial deformation and the shapememory properties were investigated. Furthermore, the relative contribution of crystalline PCL and PIBMD amorphous phases to the fixation of the temporary shape were distinguished by a toluene vapor treatment approach. The results indicated that at 50 degrees C, both PCL and PIBMD amorphous phases can be orientated during deformation, resulting in thermally-induced crystals of PCL domains and joint contribution to the switching domains. In contrast at 20 degrees C, the temporary shape was mainly fixed by PCL crystals generated via strain-induced crystallization.}, language = {en} } @article{YanZhouShuetal.2015, author = {Yan, Ming and Zhou, Wei and Shu, Hua and Kliegl, Reinhold}, title = {Perceptual span depends on font size during the reading of chinese sentences}, series = {Journal of experimental psychology : Learning, memory, and cognition}, volume = {41}, journal = {Journal of experimental psychology : Learning, memory, and cognition}, number = {1}, publisher = {American Psychological Association}, address = {Washington}, issn = {0278-7393}, doi = {10.1037/a0038097}, pages = {209 -- 219}, year = {2015}, abstract = {The present study explored the perceptual span (i.e., the physical extent of an area from which useful visual information is extracted during a single fixation) during the reading of Chinese sentences in 2 experiments. In Experiment 1, we tested whether the rightward span can go beyond 3 characters when visually similar masks were used. Results showed that Chinese readers needed at least 4 characters to the right of fixation to maintain a normal reading behavior when visually similar masks were used and when characters were displayed in small fonts, indicating that the span is dynamically influenced by masking materials. In Experiments 2 and 3, we asked whether the perceptual span varies as a function of font size in spaced (German) and unspaced (Chinese) scripts. Results clearly suggest perceptual span depends on font size in Chinese, but we failed to find such evidence for German. We propose that the perceptual span in Chinese is flexible; it is strongly constrained by its language-specific properties such as high information density and lack of word spacing. Implications for saccade-target selection during the reading of Chinese sentences are discussed.}, language = {en} } @article{YanSommer2015, author = {Yan, Ming and Sommer, Werner}, title = {Parafoveal-on-Foveal Effects of Emotional Word Semantics in Reading Chinese Sentences: Evidence From Eye Movements}, series = {Journal of experimental psychology : Learning, memory, and cognition}, volume = {41}, journal = {Journal of experimental psychology : Learning, memory, and cognition}, number = {4}, publisher = {American Psychological Association}, address = {Washington}, issn = {0278-7393}, doi = {10.1037/xlm0000095}, pages = {1237 -- 1243}, year = {2015}, abstract = {Despite the well-known influence of emotional meaning on cognition, relatively less is known about its effects on reading behavior. We investigated whether fixation behavior during the reading of Chinese sentences is influenced by emotional word meaning in the parafovea. Two-character target words embedded into the same sentence frames provided emotionally positive, negative, or neutral contents. Fixation durations on neutral pretarget words were prolonged for positive parafoveal words and for highly frequent negative parafoveal words. In addition, fixation durations on foveal emotional words were shorter than those on neutral words. We also found that the role of emotional words varied as a function of their valence during foveal and parafoveal processing. These findings suggest a processing advantage for emotional words relative to emotionally neutral stimuli in foveal and parafoveal vision. We discuss implications for the notion of attention attraction due to emotional content.}, language = {en} } @article{YanPanBelangeretal.2015, author = {Yan, Ming and Pan, Jinger and Belanger, Nathalie N. and Shu, Hua}, title = {Chinese deaf readers have early access to parafoveal semantics}, series = {Journal of experimental psychology : Learning, memory, and cognition}, volume = {41}, journal = {Journal of experimental psychology : Learning, memory, and cognition}, number = {1}, publisher = {American Psychological Association}, address = {Washington}, issn = {0278-7393}, doi = {10.1037/xlm0000035}, pages = {254 -- 261}, year = {2015}, abstract = {In the present study, we manipulated different types of information available in the parafovea during the reading of Chinese sentences and examined how deaf readers make use of the parafoveal information. Results clearly indicate that although the reading-level matched hearing readers make greater use of orthographic information in the parafovea, parafoveal semantic information is obtained earlier among the deaf readers. In addition, a phonological preview benefit effect was found for the better deaf readers (relative to less-skilled deaf readers), although we also provide an alternative explanation for this effect. Providing evidence that Chinese deaf readers have higher efficiency when processing parafoveal semantics, the study indicates flexibility across individuals in the mechanisms underlying word recognition adapting to the inputs available in the linguistic environment.}, language = {en} } @article{Yan2015, author = {Yan, Ming}, title = {Visually complex foveal words increase the amount of parafoveal information acquired}, series = {Vision research : an international journal for functional aspects of vision.}, volume = {111}, journal = {Vision research : an international journal for functional aspects of vision.}, publisher = {Elsevier}, address = {Oxford}, issn = {0042-6989}, doi = {10.1016/j.visres.2015.03.025}, pages = {91 -- 96}, year = {2015}, abstract = {This study investigates the effect of foveal load (i.e., processing difficulty of currently fixated words) on parafoveal information processing. Contrary to the commonly accepted view that high foveal load leads to reduced parafoveal processing efficiency, results of the present study showed that increasing foveal visual (but not linguistic) processing load actually increased the amount of parafoveal information acquired, presumably due to the fact that longer fixation duration on the pretarget word provided more time for parafoveal processing of the target word. It is therefore proposed in the present study that foveal linguistic processing load is not the only factor that determines parafoveal processing; preview time (afforded by foveal word visual processing load) may jointly influence parafoveal processing. (C) 2015 Elsevier Ltd. All rights reserved.}, language = {en} } @article{YadavalliKoenigSanter2015, author = {Yadavalli, Nataraja Sekhar and K{\"o}nig, Tobias and Santer, Svetlana}, title = {Selective mass transport of azobenzene-containing photosensitive films towards or away from the light intensity}, series = {Journal of the Society for Information Display}, volume = {23}, journal = {Journal of the Society for Information Display}, number = {4}, publisher = {Wiley-Blackwell}, address = {Hoboken}, issn = {1071-0922}, doi = {10.1002/jsid.306}, pages = {154 -- 162}, year = {2015}, abstract = {Here, we report on two photosensitive amorphous polymers showing opposite behavior upon exposure to illumination. The first polymer (PAZO) consists of linear backbone to which azobenzene-containing side chains are covalently attached, while in the second polymer (azo-PEI), the azobenzene side chains are attached ionically to a polyelectrolyte backbone. When irradiated through a mask, the PAZO goes away from the intensity maxima, leaving behind topography trenches, while the direction of the mass transport of the azo-PEI polymer points towards the intensity maxima. This kind of behavior has been reported only for certain liquid crystalline polymers that exhibit in-phase reaction on illumination, that is, topography maxima coincides with the intensity maxima. Furthermore, flat nanocrystals placed on top of azo-PEI film was found to be moved together with the mass transport of the underlying polymer film as visualized using in situ atomic force microscopy (AFM) measurements. It was also demonstrated that the two polymer films respond differently on irradiation with the polarization and intensity interference patterns (IPs). To record the kinetic of the surface relief grating formation within two polymers during irradiation with different IPs, we utilized a homemade setup combining the optical part for the generation of IP and AFM. A possible mechanism explaining different responses on the irradiation of amorphous polymers is discussed in the frame of a theoretical model proposed by Saphiannikova et al. (J. Phys. Chem. B 113, 5032-5045 (2009)).}, language = {en} } @article{XuShalomPiersimonietal.2015, author = {Xu, Jingsan and Shalom, Menny and Piersimoni, Fortunato and Antonietti, Markus and Neher, Dieter and Brenner, Thomas J. K.}, title = {Color-Tunable Photoluminescence and NIR Electroluminescence in Carbon Nitride Thin Films and Light-Emitting Diodes}, series = {Advanced optical materials}, volume = {3}, journal = {Advanced optical materials}, number = {7}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {2195-1071}, doi = {10.1002/adom.201500019}, pages = {913 -- 917}, year = {2015}, language = {en} } @article{XuCaoBrenneretal.2015, author = {Xu, Jingsan and Cao, Shaowen and Brenner, Thomas J. K. and Yang, Xiaofei and Yu, Jiaguo and Antonietti, Markus and Shalom, Menny}, title = {Supramolecular Chemistry in Molten Sulfur: Preorganization Effects Leading to Marked Enhancement of Carbon Nitride Photoelectrochemistry}, series = {Advanced functional materials}, volume = {25}, journal = {Advanced functional materials}, number = {39}, publisher = {Wiley-VCH}, address = {Weinheim}, issn = {1616-301X}, doi = {10.1002/adfm.201502843}, pages = {6265 -- 6271}, year = {2015}, abstract = {Here, a new method for enhancing the photoelectrochemical properties of carbon nitride thin films by in situ supramolecular-driven preorganization of phenyl-contained monomers in molten sulfur is reported. A detailed analysis of the chemical and photophysical properties suggests that the molten sulfur can texture the growth and induce more effective integration of phenyl groups into the carbon nitride electrodes, resulting in extended light absorption alongside with improved conductivity and better charge transfer. Furthermore, photophysical measurements indicate the formation of sub-bands in the optical bandgap which is beneficial for exciton splitting. Moreover, the new bands can mediate hole transfer to the electrolyte, thus improving the photooxidation activity. The utilization of high temperature solvent as the polymerization medium opens new opportunities for the significant improvement of carbon nitride films toward an efficient photoactive material for various applications.}, language = {en} } @article{XinLaRueObergetal.2015, author = {Xin, Hong and LaRue, Jerry and Oberg, Henrik and Beye, Martin and Turner, J. J. and Gladh, J{\"o}rgen and Ng, May L. and Sellberg, Jonas A. and Kaya, Sarp and Mercurio, G. and Hieke, F. and Nordlund, Dennis and Schlotter, William F. and Dakovski, Georgi L. and Minitti, Michael P. and F{\"o}hlisch, Alexander and Wolf, Martin and Wurth, Wilfried and Ogasawara, Hirohito and Norskov, Jens K. and Ostrom, Henrik and Pettersson, Lars G. M. and Nilsson, Anders and Abild-Pedersen, Frank}, title = {Strong Influence of Coadsorbate Interaction on CO Desorption Dynamics on Ru(0001) Probed by Ultrafast X-Ray Spectroscopy and Ab Initio Simulations}, series = {Physical review letters}, volume = {114}, journal = {Physical review letters}, number = {15}, publisher = {American Physical Society}, address = {College Park}, issn = {0031-9007}, doi = {10.1103/PhysRevLett.114.156101}, pages = {6}, year = {2015}, abstract = {We show that coadsorbed oxygen atoms have a dramatic influence on the CO desorption dynamics from Ru(0001). In contrast to the precursor-mediated desorption mechanism on Ru(0001), the presence of surface oxygen modifies the electronic structure of Ru atoms such that CO desorption occurs predominantly via the direct pathway. This phenomenon is directly observed in an ultrafast pump-probe experiment using a soft x-ray free-electron laser to monitor the dynamic evolution of the valence electronic structure of the surface species. This is supported with the potential of mean force along the CO desorption path obtained from density-functional theory calculations. Charge density distribution and frozen-orbital analysis suggest that the oxygen-induced reduction of the Pauli repulsion, and consequent increase of the dative interaction between the CO 5 sigma and the charged Ru atom, is the electronic origin of the distinct desorption dynamics. Ab initio molecular dynamics simulations of CO desorption from Ru(0001) and oxygen-coadsorbed Ru(0001) provide further insights into the surface bond-breaking process.}, language = {en} } @misc{XiangHofreiterZhao2015, author = {Xiang, Hai and Hofreiter, Michael and Zhao, Xingbo}, title = {Reply to Peng et al.: Archaeological contexts should not be ignored for early chicken domestication}, series = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {112}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, number = {16}, publisher = {National Acad. of Sciences}, address = {Washington}, issn = {0027-8424}, doi = {10.1073/pnas.1502207112}, pages = {E1972 -- E1973}, year = {2015}, language = {en} } @misc{XiangGaoYuetal.2015, author = {Xiang, Hai and Gao, Jianqiang and Yu, Baoquan and Hofreiter, Michael and Zhao, Xingbo}, title = {Reply to Peters et al.: Further discussions confirm early Holocene chicken domestication in northern China}, series = {Proceedings of the National Academy of Sciences of the United States of America}, volume = {112}, journal = {Proceedings of the National Academy of Sciences of the United States of America}, number = {19}, publisher = {National Acad. of Sciences}, address = {Washington}, issn = {0027-8424}, doi = {10.1073/pnas.1503956112}, pages = {E2416 -- E2416}, year = {2015}, language = {en} } @article{WuerznerSchroeder2015, author = {W{\"u}rzner, Kay-Michael and Schroeder, Sascha}, title = {Morphologische und phonologische Repr{\"a}sentationen in childLex}, series = {Spektrum Patholinguistik (Band 8) - Schwerpunktthema: Besonders behandeln? : Sprachtherapie im Rahmen prim{\"a}rer St{\"o}rungsbilder}, journal = {Spektrum Patholinguistik (Band 8) - Schwerpunktthema: Besonders behandeln? : Sprachtherapie im Rahmen prim{\"a}rer St{\"o}rungsbilder}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-79842}, pages = {183 -- 200}, year = {2015}, language = {de} } @article{WuerfelNeherSpiesetal.2015, author = {W{\"u}rfel, Uli and Neher, Dieter and Spies, Annika and Albrecht, Steve}, title = {Impact of charge transport on current-voltage characteristics and power-conversion efficiency of organic solar cells}, series = {Nature Communications}, volume = {6}, journal = {Nature Communications}, publisher = {Nature Publ. Group}, address = {London}, issn = {2041-1723}, doi = {10.1038/ncomms7951}, pages = {9}, year = {2015}, abstract = {This work elucidates the impact of charge transport on the photovoltaic properties of organic solar cells. Here we show that the analysis of current-voltage curves of organic solar cells under illumination with the Shockley equation results in values for ideality factor, photo-current and parallel resistance, which lack physical meaning. Drift-diffusion simulations for a wide range of charge-carrier mobilities and illumination intensities reveal significant carrier accumulation caused by poor transport properties, which is not included in the Shockley equation. As a consequence, the separation of the quasi Fermi levels in the organic photoactive layer (internal voltage) differs substantially from the external voltage for almost all conditions. We present a new analytical model, which considers carrier transport explicitly. The model shows excellent agreement with full drift-diffusion simulations over a wide range of mobilities and illumination intensities, making it suitable for realistic efficiency predictions for organic solar cells.}, language = {en} } @book{WaetzoldtGiese2015, author = {W{\"a}tzoldt, Sebastian and Giese, Holger}, title = {Modeling collaborations in self-adaptive systems of systems}, number = {96}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-324-4}, issn = {1613-5652}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-73036}, publisher = {Universit{\"a}t Potsdam}, pages = {72}, year = {2015}, abstract = {An increasing demand on functionality and flexibility leads to an integration of beforehand isolated system solutions building a so-called System of Systems (SoS). Furthermore, the overall SoS should be adaptive to react on changing requirements and environmental conditions. Due SoS are composed of different independent systems that may join or leave the overall SoS at arbitrary point in times, the SoS structure varies during the systems lifetime and the overall SoS behavior emerges from the capabilities of the contained subsystems. In such complex system ensembles new demands of understanding the interaction among subsystems, the coupling of shared system knowledge and the influence of local adaptation strategies to the overall resulting system behavior arise. In this report, we formulate research questions with the focus of modeling interactions between system parts inside a SoS. Furthermore, we define our notion of important system types and terms by retrieving the current state of the art from literature. Having a common understanding of SoS, we discuss a set of typical SoS characteristics and derive general requirements for a collaboration modeling language. Additionally, we retrieve a broad spectrum of real scenarios and frameworks from literature and discuss how these scenarios cope with different characteristics of SoS. Finally, we discuss the state of the art for existing modeling languages that cope with collaborations for different system types such as SoS.}, language = {en} } @phdthesis{Wust2015, author = {Wust, Johannes}, title = {Mixed workload managment for in-memory databases}, pages = {VIII, 167}, year = {2015}, language = {en} } @misc{WuGlebeBoeker2015, author = {Wu, Lei and Glebe, Ulrich and B{\"o}ker, Alexander}, title = {Surface-initiated controlled radical polymerizations from silica nanoparticles, gold nanocrystals, and bionanoparticles}, series = {Polymer Chemistry}, volume = {6}, journal = {Polymer Chemistry}, number = {29}, publisher = {Royal Society of Chemistry}, address = {Cambridge}, issn = {1759-9954}, doi = {10.1039/c5py00525f}, pages = {5143 -- 5184}, year = {2015}, abstract = {In recent years, core/shell nanohybrids containing a nanoparticle core and a distinct surrounding shell of polymer brushes have received extensive attention in nanoelectronics, nanophotonics, catalysis, nanopatterning, drug delivery, biosensing, and many others. From the large variety of existing polymerization methods on the one hand and strategies for grafting onto nanoparticle surfaces on the other hand, the combination of grafting-from with controlled radical polymerization (CRP) techniques has turned out to be the best suited for synthesizing these well-defined core/shell nanohybrids and is known as surface-initiated CRP. Most common among these are surface-initiated atom transfer radical polymerization (ATRP), surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization, and surface-initiated nitroxide-mediated polymerization (NMP). This review highlights the state of the art of growing polymers from nanoparticles using surface-initiated CRP techniques. We focus on mechanistic aspects, synthetic procedures, and the formation of complex architectures as well as novel properties. From the vast number of examples of nanoparticle/polymer hybrids formed by surface-initiated CRP techniques, we present nanohybrid formation from the particularly important and most studied silica nanoparticles, gold nanocrystals, and proteins which can be regarded as bionanoparticles.}, language = {en} } @phdthesis{Wollny2015, author = {Wollny, Anna Irena}, title = {Eigeninitiative in der Kindheit und ihre Bedeutung f{\"u}r die Entwicklung der Lesekompetenz}, school = {Universit{\"a}t Potsdam}, pages = {313}, year = {2015}, language = {de} } @article{WolffSchindlerBrand2015, author = {Wolff, Wanja and Schindler, Sebastian and Brand, Ralf}, title = {The Effect of Implicitly Incentivized Faking on Explicit and Implicit Measures of Doping Attitude: When Athletes Want to Pretend an Even More Negative Attitude to Doping}, series = {PLoS one}, volume = {10}, journal = {PLoS one}, number = {4}, publisher = {PLoS}, address = {San Fransisco}, issn = {1932-6203}, doi = {10.1371/journal.pone.0118507}, pages = {10}, year = {2015}, abstract = {The Implicit Association Test (IAT) aims to measure participants' automatic evaluation of an attitude object and is useful especially for the measurement of attitudes related to socially sensitive subjects, e.g. doping in sports. Several studies indicate that IAT scores can be faked on instruction. But fully or semi-instructed research scenarios might not properly reflect what happens in more realistic situations, when participants secretly decide to try faking the test. The present study is the first to investigate IAT faking when there is only an implicit incentive to do so. Sixty-five athletes (22.83 years +/- 2.45; 25 women) were randomly assigned to an incentive-to-fake condition or a control condition. Participants in the incentive-to-fake condition were manipulated to believe that athletes with lenient doping attitudes would be referred to a tedious 45-minute anti-doping program. Attitudes were measured with the pictorial doping brief IAT (BIAT) and with the Performance Enhancement Attitude Scale (PEAS). A one-way MANOVA revealed significant differences between conditions after the manipulation in PEAS scores, but not in the doping BIAT. In the light of our hypothesis this suggests that participants successfully faked an exceedingly negative attitude to doping when completing the PEAS, but were unsuccessful in doing so on the reaction time-based test. This study assessed BIAT faking in a setting that aimed to resemble a situation in which participants want to hide their attempts to cheat. The two measures of attitude were differentially affected by the implicit incentive. Our findings provide evidence that the pictorial doping BIAT is relatively robust against spontaneous and naive faking attempts. (B) IATs might be less prone to faking than implied by previous studies.}, language = {en} } @misc{WolffSchindlerBrand2015, author = {Wolff, Wanja and Schindler, Sebastian and Brand, Ralf}, title = {The effect of implicitly incentivized faking on explicit and implicit measures of doping attitude}, series = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe}, number = {524}, issn = {1866-8364}, doi = {10.25932/publishup-40985}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-409854}, pages = {10}, year = {2015}, abstract = {The Implicit Association Test (IAT) aims to measure participants' automatic evaluation of an attitude object and is useful especially for the measurement of attitudes related to socially sensitive subjects, e.g. doping in sports. Several studies indicate that IAT scores can be faked on instruction. But fully or semi-instructed research scenarios might not properly reflect what happens in more realistic situations, when participants secretly decide to try faking the test. The present study is the first to investigate IAT faking when there is only an implicit incentive to do so. Sixty-five athletes (22.83 years +/- 2.45; 25 women) were randomly assigned to an incentive-to-fake condition or a control condition. Participants in the incentive-to-fake condition were manipulated to believe that athletes with lenient doping attitudes would be referred to a tedious 45-minute anti-doping program. Attitudes were measured with the pictorial doping brief IAT (BIAT) and with the Performance Enhancement Attitude Scale (PEAS). A one-way MANOVA revealed significant differences between conditions after the manipulation in PEAS scores, but not in the doping BIAT. In the light of our hypothesis this suggests that participants successfully faked an exceedingly negative attitude to doping when completing the PEAS, but were unsuccessful in doing so on the reaction time-based test. This study assessed BIAT faking in a setting that aimed to resemble a situation in which participants want to hide their attempts to cheat. The two measures of attitude were differentially affected by the implicit incentive. Our findings provide evidence that the pictorial doping BIAT is relatively robust against spontaneous and naive faking attempts. (B) IATs might be less prone to faking than implied by previous studies.}, language = {en} }