@phdthesis{Ghandour2020,
  author    = {Ghandour, Rabea},
  title     = {Identification of chloroplast translational feedback regulation and establishment of aptamer based mRNA purification to unravel involved regulatory factors},
  doi       = {10.25932/publishup-48289},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-482896},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XIII, 173},
  year      = {2020},
  abstract  = {After endosymbiosis, chloroplasts lost most of their genome. Many former endosymbiotic genes are now nucleus-encoded and the products are re-imported post-translationally. Consequently, photosynthetic complexes are built of nucleus- and plastid-encoded subunits in a well-defined stoichiometry. In Chlamydomonas, the translation of chloroplast-encoded photosynthetic core subunits is feedback-regulated by the assembly state of the complexes they reside in. This process is called Control by Epistasy of Synthesis (CES) and enables the efficient production of photosynthetic core subunits in stoichiometric amounts. In chloroplasts of embryophytes, only Rubisco subunits have been shown to be feedback-regulated. That opens the question if there is additional CES regulation in embryophytes. I analyzed chloroplast gene expression in tobacco and Arabidopsis mutants with assembly defects for each photosynthetic complex to broadly answer this question. My results (i) confirmed CES within Rubisco and hint to potential translational feedback regulation in the synthesis of (ii) cytochrome b6f (Cyt b6f) and (iii) photosystem II (PSII) subunits. This work suggests a CES network in PSII that links psbD, psbA, psbB, psbE, and potentially psbH expression by a feedback mechanism that at least partially differs from that described in Chlamydomonas. Intriguingly, in the Cyt b6f complex, a positive feedback regulation that coordinates the synthesis of PetA and PetB was observed, which was not previously reported in Chlamydomonas. No evidence for CES interactions was found in the expression of NDH and ATP synthase subunits of embryophytes. Altogether, this work provides solid evidence for novel assembly-dependent feedback regulation mechanisms controlling the expression of photosynthetic genes in chloroplasts of embryophytes. In order to obtain a comprehensive inventory of the rbcL and psbA RNA-binding proteomes (including factors that regulate their expression, especially factors involved in CES), an aptamer based affinity purification method was adapted and refined for the specific purification these transcripts from tobacco chloroplasts. To this end, three different aptamers (MS2, Sephadex ,and streptavidin binding) were stably introduced into the 3' UTRs of psbA and rbcL by chloroplast transformation. RNA aptamer based purification and subsequent chip analysis (RAP Chip) demonstrated a strong enrichment of psbA and rbcL transcripts and currently, ongoing mass spectrometry analyses shall reveal potential regulatory factors. Furthermore, the suborganellar localization of MS2 tagged psbA and rbcL transcripts was analyzed by a combined affinity, immunology, and electron microscopy approach and demonstrated the potential of aptamer tags for the examination of the spatial distribution of chloroplast transcripts.},
  language  = {en}
}
@phdthesis{Hoelscher2020,
  author    = {Hoelscher, Matthijs Pieter},
  title     = {The production of antimicrobial polypeptides in chloroplasts},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 114},
  year      = {2020},
  abstract  = {Plants are an attractive platform for the production of medicinal compounds because of their potential to generate large amounts of biomass cheaply. The use of chloroplast transformation is an attractive way to achieve the recombinant production of proteins in plants, because of the chloroplasts' high capacity to produce foreign proteins in comparison to nuclear transformed plants. In this thesis, the production of two different types of antimicrobial polypeptides in chloroplasts is explored. The first example is the production of the potent HIV entry inhibitor griffithsin. Griffithsin has the potential to prevent HIV infections by blocking the entry of the virus into human cells. Here the use of transplastomic plants as an inexpensive production method for griffithsin was explored. Transplastomic plants grew healthily and were able to accumulate griffithsin to up to 5\% of the total soluble protein. Griffithsin could easily be purified from tobacco leaf tissue and had a similarly high neutralization activity as griffithsin recombinantly produced in bacteria. Griffithsin could be purified from dried tobacco leaves, demonstrating that dried leaves could be used as a storable starting material for griffithsin purification, circumventing the need for immediate purification after harvest. The second example is the production of antimicrobial peptides (AMPs) that have the capacity to kill bacteria and are an attractive alternative to currently used antibiotics that are increasingly becoming ineffective. The production of antimicrobial peptides was considerably more challenging than the production of griffithsin. Small AMPs are prone to degradation in plastids. This problem was overcome by fusing AMPs to generate larger polypeptides. In one approach, AMPs were fused to each other to increase size and combine the mode of action of multiple AMPs. This improved the accumulation of AMPs but also resulted in impaired plant growth. This was solved by the use of two different inducible systems, which could largely restore plant growth. Fusions of multiple AMPs were insoluble and could not be purified. In addition to fusing AMPs to each other, the fusion of AMPs to small ubiquitin-like modifier (SUMO), was tested as an approach to improve the accumulation, facilitate purification, and reduce the toxicity of AMPs to chloroplasts. Fusion of AMPs to SUMO indeed increased accumulation while reducing the toxicity to the plants. SUMO fusions produced inside chloroplasts could be purified, and SUMO could be efficiently cleaved off with the SUMO protease. Such fusions therefore provide a promising strategy for the production of AMPs and other small polypeptides inside chloroplasts.},
  language  = {en}
}
@phdthesis{Irmscher2020,
  author    = {Irmscher, Tobias},
  title     = {Enzymatic remodelling of the exopolysaccharide stewartan network},
  doi       = {10.25932/publishup-47248},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472486},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 170},
  year      = {2020},
  abstract  = {In nature, bacteria are found to reside in multicellular communities encased in self-produced extracellular matrices. Indeed, biofilms are the default lifestyle of the bacteria which cause persistent infections in humans. The biofilm assembly protects bacterial cells from desiccation and limits the effectiveness of antimicrobial treatments. A myriad of biomolecules in the extracellular matrix, including proteins, exopolysaccharides, lipids, extracellular DNA and other, form a dense and viscoelastic three dimensional network. Many studies emphasized that a destabilization of the mechanical integrity of biofilm architectures potentially eliminates the protective shield and renders bacteria more susceptible to the immune system and antibiotics. Pantoea stewartii is a plant pathogen which infects monocotyledons such as maize and sweet corn. These bacteria produce dense biofilms in the xylem of infected plants which cause wilting of plants and crops. Stewartan is an exopolysaccharide which is produced by Pantoea stewartii and secreted as the major component to the extracellular matrix. It consists of heptasaccharide repeating units with a high degree of polymerization (2-4 MDa). In this work, the physicochemical properties of stewartan were investigated to understand the contributions of this exopolysaccharide to the mechanical integrity and cohesiveness of Pantoea stewartii biofilms. Therefore, a coarse-grained model of stewartan was developed with computational techniques to obtain a model for its three dimensional structural features. Here, coarse-grained molecular dynamic simulations revealed that the exopolysaccharide forms a hydrogel in which the exopolysaccharide chains arrange into a three dimensional mesh-like network. Simulations at different concentrations were used to investigate the influence of the water content on the network formation. Stewartan was further purified from 72 h grown Pantoea stewartii biofilms and the diffusion of bacteriophage and differently-sized nanoparticles (which ranged from 1.1 to 193 nm diameter) was analyzed in reconstituted stewartan solutions. Fluorescence correlation spectroscopy and single-particle tracking revealed that the stewartan network impeded the mobility of a set of differently-sized fluorescent particles in a size-dependent manner. Diffusion of these particles became more anomalous, as characterized by fitting the diffusion data to an anomalous diffusion model, with increasing stewartan concentrations. Further bulk and microrheological experiments were used to analyze the transitions in stewartan fluid behavior and stewartan chain entanglements were described. Moreover, it was noticed, that a small fraction of bacteriophage particles was trapped in small-sized pores deviating from classical random walks which highlighted the structural heterogeneity of the stewartan network. Additionally, the mobility of fluorescent particles also depended on the charge of the stewartan exopolysaccharide and a model of a molecular sieve for the stewartan network was proposed. The here reported structural features of the stewartan polymers were used to provide a detailed description of the mechanical properties of typically glycan-based biofilms such as the one from Pantoea stewartii. In addition, the mechanical properties of the biofilm architecture are permanently sensed by the embedded bacteria and enzymatic modifications of the extracellular matrix take place to address environmental cues. Hence, in this work the influence of enzymatic degradation of the stewartan exopolysaccharides on the overall exopolysaccharide network structure was analyzed to describe relevant physiological processes in Pantoea stewartii biofilms. Here, the stewartan hydrolysis kinetics of the tailspike protein from the ΦEa1h bacteriophage, which is naturally found to infect Pantoea stewartii cells, was compared to WceF. The latter protein is expressed from the Pantoea stewartii stewartan biosynthesis gene cluster wce I-III. The degradation of stewartan by the ΦEa1h tailspike protein was shown to be much faster than the hydrolysis kinetics of WceF, although both enzymes cleaved the β D GalIII(1→3)-α-D-GalI glycosidic linkage from the stewartan backbone. Oligosaccharide fragments which were produced during the stewartan cleavage, were analyzed in size-exclusion chromatography and capillary electrophoresis. Bioinformatic studies and the analysis of a WceF crystal structure revealed a remarkably high structural similarity of both proteins thus unveiling WceF as a bacterial tailspike-like protein. As a consequence, WceF might play a role in stewartan chain length control in Pantoea stewartii biofilms.},
  language  = {en}
}
@phdthesis{Jing2020,
  author    = {Jing, Yue},
  title     = {Characterization of Serine Carboxypeptidase-like (SCPL) gene family in Brassicaceae},
  school      = {Universit{\"a}t Potsdam},
  year      = {2020},
  language  = {en}
}
@phdthesis{Kožul2020,
  author    = {Kožul, Danijela},
  title     = {Systematic identification of loci determining chloroplast and nuclear genome incompatibility in the evening primrose (Oenothera)},
  school      = {Universit{\"a}t Potsdam},
  pages     = {126},
  year      = {2020},
  language  = {en}
}
@phdthesis{Kubis2020,
  author    = {Kubis, Armin},
  title     = {Synthetic carbon neutral photorespiration bypasses},
  school      = {Universit{\"a}t Potsdam},
  pages     = {68},
  year      = {2020},
  abstract  = {With populations growing worldwide and climate change threatening food production there is an urgent need to find ways to ensure food security. Increasing carbon fixation rate in plants is a promising approach to boost crop yields. The carbon-fixing enzyme Rubisco catalyzes, beside the carboxylation reaction, also an oxygenation reaction that generates glycolate-2P, which needs to be recycled via a metabolic route termed photorespiration. Photorespiration dissipates energy and most importantly releases previously fixed CO2, thus significantly lowering carbon fixation rate and yield. Engineering plants to omit photorespiratory CO2 release is the goal of the FutureAgriculture consortium and this thesis is part of this collaboration. The consortium aims to establish alternative glycolate-2P recycling routes that do not release CO2. Ultimately, they are expected to increase carbon fixation rates and crop yields. Natural and novel reactions, which require enzyme engineering, were considered in the pathway design process. Here I describe the engineering of two pathways, the arabinose-5P and the erythrulose shunt. They were designed to recycle glycolate-2P via glycolaldehyde into a sugar phosphate and thereby reassimilate glycolate-2P to the Calvin cycle. I used Escherichia coli gene deletion strains to validate and characterize the activity of both synthetic shunts. The strains' auxotrophies can be alleviated by the activity of the synthetic route, thus providing a direct way to select for pathway activity. I introduced all pathway components to these dedicated selection strains and discovered inhibitions, limitations and metabolic cross talk interfering with pathway activity. After resolving these issues, I was able to show the in vivo activity of all pathway components and combine them into functional modules.. Specifically, I demonstrate the activity of a new-to-nature module of glycolate reduction to glycolaldehyde. Also, I successfully show a new glycolaldehyde assimilation route via arabinose-5P to ribulose-5P. In addition, all necessary enzymes for glycolaldehyde assimilation via L-erythrulose were shown to be active and an L-threitol assimilation route via L-erythrulose was established in E. coli. On their own, these findings demonstrate the power of using an easily engineerable microbe to test novel pathways; combined, they will form the basis for implementing photorespiration bypasses in plants.},
  language  = {en}
}
@phdthesis{Kueken2020,
  author    = {K{\"u}ken, Anika},
  title     = {Predictions from constraint-based approaches including enzyme kinetics},
  school      = {Universit{\"a}t Potsdam},
  pages     = {116, A-16, B-7, C-8},
  year      = {2020},
  abstract  = {The metabolic state of an organism reflects the entire phenotype that is jointly affected by genetic and environmental changes. Due to the complexity of metabolism, system-level modelling approaches have become indispensable tools to obtain new insights into biological functions. In particular, simulation and analysis of metabolic networks using constraint-based modelling approaches have helped the analysis of metabolic fluxes. However, despite ongoing improvements in prediction of reaction flux through a system, approaches to directly predict metabolite concentrations from large-scale metabolic networks remain elusive. In this thesis, we present a computational approach for inferring concentration ranges from genome-scale metabolic models endowed with mass action kinetics. The findings specify a molecular mechanism underling facile control of concentration ranges for components in large-scale metabolic networks. Most importantly, an extended version of the approach can be used to predict concentration ranges without knowledge of kinetic parameters, provided measurements of concentrations in a reference state. We show that the approach is applicable with large-scale kinetic and stoichiometric metabolic models of organisms from different kingdoms of life. By challenging the predictions of concentration ranges in the genome-scale metabolic network of Escherichia coli with real-world data sets, we further demonstrate the prediction power and limitations of the approach. To predict concentration ranges in other species, e.g. model plant species Arabidopsis thaliana, we would rely on estimates of kinetic parameters (i.e. enzyme catalytic rates) since plant-specific enzyme catalytic rates are poorly documented. Using the constraint-based approach of Davidi et al. for estimation of enzyme catalytic rates, we obtain values for 168 plant enzymes. The approach depends on quantitative proteomics data and flux estimates obtained from constraint-based model of plant leaf metabolism integrating maximal rates of selected enzymes, plant-specific constraints on fluxes through canonical pathways, and growth measurements from Arabidopsis thaliana rosette under ten conditions. We demonstrate a low degree of plant enzyme saturation, supported by the agreement between concentrations of nicotinamide adenine dinucleotide, adenosine triphosphate, and glyceraldehyde 3-phosphate, based on our maximal in vivo catalytic rates, and available quantitative metabolomics data. Hence, our results show genome-wide estimation for plant-specific enzyme catalytic rates is feasible. These can now be readily employed to study resource allocation, to predict enzyme and metabolite concentrations using recent constrained-based modelling approaches. Constraint-based methods do not directly account for kinetic mechanisms and corresponding parameters. Therefore, a number of workflows have already been proposed to approximate reaction kinetics and to parameterize genome-scale kinetic models. We present a systems biology strategy to build a fully parameterized large-scale model of Chlamydomonas reinhardtii accounting for microcompartmentalization in the chloroplast stroma. Eukaryotic algae comprise a microcompartment, the pyrenoid, essential for the carbon concentrating mechanism (CCM) that improves their photosynthetic performance. Since the experimental study of the effects of microcompartmentation on metabolic pathways is challenging, we employ our model to investigate compartmentation of fluxes through the Calvin-Benson cycle between pyrenoid and stroma. Our model predicts that ribulose-1,5-bisphosphate, the substrate of Rubisco, and 3-phosphoglycerate, its product, diffuse in and out of the pyrenoid. We also find that there is no major diffusional barrier to metabolic flux between the pyrenoid and stroma. Therefore, our computational approach represents a stepping stone towards understanding of microcompartmentalized CCM in other organisms. This thesis provides novel strategies to use genome-scale metabolic networks to predict and integrate metabolite concentrations. Therefore, the presented approaches represent an important step in broadening the applicability of large-scale metabolic models to a range of biotechnological and medical applications.},
  language  = {en}
}
@phdthesis{Liu2020,
  author    = {Liu, Qi},
  title     = {Influence of CO2 degassing on microbial community distribution and activity in the Hartoušov degassing system, western Eger Rift (Czech Republic)},
  doi       = {10.25932/publishup-47534},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-475341},
  school      = {Universit{\"a}t Potsdam},
  pages     = {146},
  year      = {2020},
  abstract  = {The Cheb Basin (CZ) is a shallow Neogene intracontinental basin located in the western Eger Rift. The Cheb Basin is characterized by active seismicity and diffuse degassing of mantle-derived CO2 in mofette fields. Within the Cheb Basin, the Hartoušov mofette field shows a daily CO2 flux of 23-97 tons. More than 99\% of CO2 released over an area of 0.35 km2. Seismic active periods have been observed in 2000 and 2014 in the Hartoušov mofette field. Due to the active geodynamic processes, the Cheb Basin is considered to be an ideal region for the continental deep biosphere research focussing on the interaction of biological processes with geological processes. To study the influence of CO2 degassing on microbial community in the surface and subsurface environments, two 3-m shallow drillings and a 108.5-m deep scientific drilling were conducted in 2015 and 2016 respectively. Additionally, the fluid retrieved from the deep drilling borehole was also recovered. The different ecosystems were compared regarding their geochemical properties, microbial abundances, and microbial community structures. The geochemistry of the mofette is characterized by low pH, high TOC, and sulfate contents while the subsurface environment shows a neutral pH, and various TOC and sulfate contents in different lithological settings. Striking differences in the microbial community highlight the substantial impact of elevated CO2 concentrations and high saline groundwater on microbial processes. In general, the microorganisms had low abundance in the deep subsurface sediment compared with the shallow mofette. However, within the mofette and the deep subsurface sediment, the abundance of microbes does not show a typical decrease with depth, indicating that the uprising CO2-rich groundwater has a strong influence on the microbial communities via providing sufficient substrate for anaerobic chemolithoautotrophic microorganisms. Illumina MiSeq sequencing of the 16S rRNA genes and multivariate statistics reveals that the pH strongly influences the microbial community composition in the mofette, while the subsurface microbial community is significantly influenced by the groundwater which motivated by the degassing CO2. Acidophilic microorganisms show a much higher relative abundance in the mofette. Meanwhile, the OTUs assigned to family Comamonadaceae are the dominant taxa which characterize the subsurface communities. Additionally, taxa involved in sulfur cycling characterizing the microbial communities in both mofette and CO2 dominated subsurface environments. Another investigated important geo-bio interaction is the influence of the seismic activity. During seismic events, released H2 may serve as the electron donor for microbial hydrogenotrophic processes, such as methanogenesis. To determine whether the seismic events can potentially trigger methanogenesis by the elevated geogenic H2 concentration, we performed laboratory simulation experiments with sediments retrieved from the drillings. The simulation results indicate that after the addition of hydrogen, substantial amounts of methane were produced in incubated mofette sediments and deep subsurface sediments. The methanogenic hydrogenotrophic genera Methanobacterium was highly enriched during the incubation. The modeling of the in-situ observation of the earthquake swarm period in 2000 at the Novy Kostel focal area/Czech Republic and our laboratory simulation experiments reveals a close relation between seismic activities and microbial methane production via earthquake-induced H2 release. We thus conclude that H2 - which is released during seismic activity - can potentially trigger methanogenic activity in the deep subsurface. Based on this conclusion, we further hypothesize that the hydrogenotrophic early life on Earth was boosted by the Late Heavy Bombardment induced seismic activity in approximately 4.2 to 3.8 Ga.},
  language  = {en}
}
@phdthesis{Mavrothalassiti2020,
  author    = {Mavrothalassiti, Eleni},
  title     = {A.thaliana root and shoot single-cell transcriptomes and detection of mobile transcripts},
  school      = {Universit{\"a}t Potsdam},
  pages     = {133},
  year      = {2020},
  language  = {en}
}
@phdthesis{Mitzscherling2020,
  author    = {Mitzscherling, Julia},
  title     = {Microbial communities in submarine permafrost and their response to permafrost degradation and warming},
  doi       = {10.25932/publishup-47124},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471240},
  school      = {Universit{\"a}t Potsdam},
  pages     = {I, 231},
  year      = {2020},
  abstract  = {The Arctic region is especially impacted by global warming as temperatures in high latitude regions have increased and are predicted to further rise at levels above the global average. This is crucial to Arctic soils and the shallow shelves of the Arctic Ocean as they are underlain by permafrost. Perennially frozen ground is a habitat for a large number and great diversity of viable microorganisms, which can remain active even under freezing conditions. Warming and thawing of permafrost makes trapped soil organic carbon more accessible to microorganisms. They can transform it to the greenhouse gases carbon dioxide, methane and nitrous oxide. On the other hand, it is assumed that thawing of the frozen ground stimulates microbial activity and carbon turnover. This can lead to a positive feedback loop of warming and greenhouse gas release. Submarine permafrost covers most areas of the Siberian Arctic Shelf and contains a large though unquantified carbon pool. However, submarine permafrost is not only affected by changes in the thermal regime but by drastic changes in the geochemical composition as it formed under terrestrial conditions and was inundated by Holocene sea level rise and coastal erosion. Seawater infiltration into permafrost sediments resulted in an increase of the pore water salinity and, thus, in thawing of permafrost in the upper sediment layers even at subzero temperatures. The permafrost below, which was not affected by seawater, remained ice-bonded, but warmed through seawater heat fluxes. The objective of this thesis was to study microbial communities in submarine permafrost with a focus on their response to seawater influence and long-term warming using a combined approach of molecular biological and physicochemical analyses. The microbial abundance, community composition and structure as well as the diversity were investigated in drill cores from two locations in the Laptev Sea, which were subjected to submarine conditions for centuries to millennia. The microbial abundance was measured through total cell counts and copy numbers of the 16S rRNA gene and of functional genes. The latter comprised genes which are indicative for methane production (mcrA) and sulfate reduction (dsrB). The microbial community was characterized by high-throughput-sequencing of the 16S rRNA gene. Physicochemical analyses included the determination of the pore water geochemical and stable isotopic composition, which were used to describe the degree of seawater influence. One major outcome of the thesis is that the submarine permafrost stratified into different so-called pore water units centuries as well as millennia after inundation: (i) sediments that were mixed with seafloor sediments, (ii) sediments that were infiltrated with seawater, and (iii) sediments that were unaffected by seawater. This stratification was reflected in the submarine permafrost microbial community composition only millennia after inundation but not on time-scales of centuries. Changes in the community composition as well as abundance were used as a measure for microbial activity and the microbial response to changing thermal and geochemical conditions. The results were discussed in the context of permafrost temperature, pore water composition, paleo-climatic proxies and sediment age. The combination of permafrost warming and increasing salinity as well as permafrost warming alone resulted in a disturbance of the microbial communities at least on time-scales of centuries. This was expressed by a loss of microbial abundance and bacterial diversity. At the same time, the bacterial community of seawater unaffected but warmed permafrost was mainly determined by environmental and climatic conditions at the time of sediment deposition. A stimulating effect of warming was observed only in seawater unaffected permafrost after millennia-scale inundation, visible through increased microbial abundance and reduced amounts of substrate. Despite submarine exposure for centuries to millennia, the community of bacteria in submarine permafrost still generally resembled the community of terrestrial permafrost. It was dominated by phyla like Actinobacteria, Chloroflexi, Firmicutes, Gemmatimonadetes and Proteobacteria, which can be active under freezing conditions. Moreover, the archaeal communities of both study sites were found to harbor high abundances of marine and terrestrial anaerobic methane oxidizing archaea (ANME). Results also suggested ANME populations to be active under in situ conditions at subzero temperatures. Modeling showed that potential anaerobic oxidation of methane (AOM) could mitigate the release of almost all stored or microbially produced methane from thawing submarine permafrost. Based on the findings presented in this thesis, permafrost warming and thawing under submarine conditions as well as permafrost warming without thaw are supposed to have marginal effects on the microbial abundance and community composition, and therefore likely also on carbon mobilization and the formation of methane. Thawing under submarine conditions even stimulates AOM and thus mitigates the release of methane.},
  language  = {en}
}
@phdthesis{Moratti2020,
  author    = {Moratti, Fabio Giulio},
  title     = {Structural analysis of DYW proteins and identification of the mitochondrial DNA-binding proteome of Arabidopsis thaliana},
  school      = {Universit{\"a}t Potsdam},
  pages     = {164},
  year      = {2020},
  language  = {en}
}
@phdthesis{Naake2020,
  author    = {Naake, Thomas},
  title     = {Strategies to investigate the natural variation of plant specialized metabolism},
  school      = {Universit{\"a}t Potsdam},
  year      = {2020},
  language  = {en}
}
@phdthesis{Nowak2020,
  author    = {Nowak, Jacqueline},
  title     = {Devising computational tools to quantify the actin cytoskeleton and pavement cell shape using network-based approaches},
  school      = {Universit{\"a}t Potsdam},
  pages     = {123},
  year      = {2020},
  abstract  = {Recent advances in microscopy have led to an improved visualization of different cell processes. Yet, this also leads to a higher demand of tools which can process images in an automated and quantitative fashion. Here, we present two applications that were developed to quantify different processes in eukaryotic cells which rely on the organization and dynamics of the cytoskeleton.. In plant cells, microtubules and actin filaments form the backbone of the cytoskeleton. These structures support cytoplasmic streaming, cell wall organization and tracking of cellular material to and from the plasma membrane. To better understand the underlying mechanisms of cytoskeletal organization, dynamics and coordination, frameworks for the quantification are needed. While this is fairly well established for the microtubules, the actin cytoskeleton has remained difficult to study due to its highly dynamic behaviour. One aim of this thesis was therefore to provide an automated framework to quantify and describe actin organization and dynamics. We used the framework to represent actin structures as networks and examined the transport efficiency in Arabidopsis thaliana hypocotyl cells. Furthermore, we applied the framework to determine the growth mode of cotton fibers and compared the actin organization in wild-type and mutant cells of rice. Finally, we developed a graphical user interface for easy usage. Microtubules and the actin cytoskeleton also play a major role in the morphogenesis of epidermal leaf pavement cells. These cells have highly complex and interdigitated shapes which are hard to describe in a quantitative way. While the relationship between microtubules, the actin cytoskeleton and shape formation is the object of many studies, it is still not clear how and if the cytoskeletal components predefine indentations and protrusions in pavement cell shapes. To understand the underlying cell processes which coordinate cell morphogenesis, a quantitative shape descriptor is needed. Therefore, the second aim of this thesis was the development of a network-based shape descriptor which captures global and local shape features, facilitates shape comparison and can be used to evaluate shape complexity. We demonstrated that our framework can be used to describe and compare shapes from various domains. In addition, we showed that the framework accurately detects local shape features of pavement cells and outperform contending approaches. In the third part of the thesis, we extended the shape description framework to describe pavement cell shape features on tissue-level by proposing different network representations of the underlying imaging data.},
  language  = {en}
}
@phdthesis{Saplaoura2020,
  author    = {Saplaoura, Eleftheria},
  title     = {Escaping the plant cell},
  school      = {Universit{\"a}t Potsdam},
  pages     = {156},
  year      = {2020},
  language  = {en}
}
@phdthesis{Schuster2020,
  author    = {Schuster, Maja},
  title     = {High resolution decoding of the tobacco chloroplast translatome and its dynamics during light-intensity acclimation},
  doi       = {10.25932/publishup-51268},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-512680},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 155},
  year      = {2020},
  abstract  = {Chloroplasts are the photosynthetic organelles in plant and algae cells that enable photoautotrophic growth. Due to their prokaryotic origin, modern-day chloroplast genomes harbor 100 to 200 genes. These genes encode for core components of the photosynthetic complexes and the chloroplast gene expression machinery, making most of them essential for the viability of the organism. The regulation of those genes is predominated by translational adjustments. The powerful technique of ribosome profiling was successfully used to generate highly resolved pictures of the translational landscape of Arabidopsis thaliana cytosol, identifying translation of upstream open reading frames and long non-coding transcripts. In addition, differences in plastidial translation and ribosomal pausing sites were addressed with this method. However, a highly resolved picture of the chloroplast translatome is missing. Here, with the use of chloroplast isolation and targeted ribosome affinity purification, I generated highly enriched ribosome profiling datasets of the chloroplasts translatome for Nicotiana tabacum in the dark and light. Chloroplast isolation was found unsuitable for the unbiased analysis of translation in the chloroplast but adequate to identify potential co-translational import. Affinity purification was performed for the small and large ribosomal subunit independently. The enriched datasets mirrored the results obtained from whole-cell ribosome profiling. Enhanced translational activity was detected for psbA in the light. An alternative translation initiation mechanism was not identified by selective enrichment of small ribosomal subunit footprints. In sum, this is the first study that used enrichment strategies to obtain high-depth ribosome profiling datasets of chloroplasts to study ribosome subunit distribution and chloroplast associated translation. Ever-changing light intensities are challenging the photosynthetic capacity of photosynthetic organism. Increased light intensities may lead to over-excitation of photosynthetic reaction centers resulting in damage of the photosystem core subunits. Additional to an expensive repair mechanism for the photosystem II core protein D1, photosynthetic organisms developed various features to reduce or prevent photodamage. In the long-term, photosynthetic complex contents are adjusted for the efficient use of experienced irradiation. However, the contribution of chloroplastic gene expression in the acclimation process remained largely unknown. Here, comparative transcriptome and ribosome profiling was performed for the early time points of high-light acclimation in Nicotiana tabacum chloroplasts in a genome-wide scale. The time- course data revealed stable transcript level and only minor changes in translational activity of specific chloroplast genes during high-light acclimation. Yet, psbA translation was increased by two-fold in the high light from shortly after the shift until the end of the experiment. A stress-inducing shift from low- to high light exhibited increased translation only of psbA. This study indicate that acclimation fails to start in the observed time frame and only short-term responses to reduce photoinhibition were observed.},
  language  = {en}
}
@phdthesis{Schaelicke2020,
  author    = {Sch{\"a}licke, Svenja},
  title     = {Consumer traits and trait variation under the influence of biochemical food quality},
  school      = {Universit{\"a}t Potsdam},
  pages     = {136},
  year      = {2020},
  abstract  = {The earth's ecosystems undergo considerable changes characterized by human-induced alterations of environmental factors. In order to develop conservation goals for vulnerable ecosystems, research on ecosystem functioning is required.. Therefore, it is crucial to explore organismal interactions, such as trophic interaction or competition, which are decisive for key processes in ecosystems. These interactions are determined by the performance responses of organisms to environmental changes, which in turn, are shaped by the organism's functional traits. Exploring traits, their variation, and the environmental factors that act on them may provide insights on how ecological interactions affect populations, community structures and dynamics, and thus ecosystem functioning. In aquatic ecosystems, global warming intensifies phytoplankton blooms, which are more frequently dominated by cyanobacteria. As cyanobacteria are poor in polyunsaturated fatty acids (PUFA) and sterols, this compositional change alters the biochemical food quality of phytoplankton for consumer species with potential effects on ecological interactions. Within this thesis, I studied the effects of biochemical food quality on consumer traits and performance responses at the phytoplankton-zooplankton interface using different strains of two closely related generalist rotifer species Brachionus calyciflorus and Brachionus fernandoi and three phytoplankton species that differ in their biochemical food quality, i.e. in their content and composition of PUFA and sterols. In a series of laboratory feeding experiments I found that biochemical food quality affected rotifer's performance, i.e. fecundity, survival, and population growth, across a broad range of food quantities. Biochemical food quality constraints, which are often underestimated as influencing environmental factors, had strong impacts on performance responses. I further explored the potential of biochemical food quality in mediating consumer response variation between species and among strains of one species. Co-limitation by food quantity and biochemical food quality resulted in differences in performance responses, which were more pronounced within than between rotifer species. Furthermore, I demonstrated that the body PUFA compositions of rotifer species and strains were differently affected by the dietary PUFA supply, which indicates inter- and intraspecific differences in physiological traits, such as PUFA retention, allocation, and/or bioconversion capacity, within the genus Brachionus. This indicates that dietary PUFA are involved in shaping traits and performance responses of rotifers. This thesis reveals that biochemical food quality is an environmental factor with strong effects on individual traits and performance responses of consumers. Biochemical food quality constraints can further mediate trait and response variation among species or strains. Consequently, they carry the potential to shape ecological interactions and evolutionary processes with effects on community structures and dynamics. Trait-based approaches, which include food quality research, thus may provide further insights into the linkage between functional diversity and the maintenance of crucial ecosystem functions.},
  language  = {en}
}
@phdthesis{Siemiatkowska2020,
  author    = {Siemiatkowska, Beata},
  title     = {Redox signalling in plants},
  doi       = {10.25932/publishup-48911},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489119},
  school      = {Universit{\"a}t Potsdam},
  pages     = {127},
  year      = {2020},
  abstract  = {Once proteins are synthesized, they can additionally be modified by post-translational modifications (PTMs). Proteins containing reactive cysteine thiols, stabilized in their deprotonated form due to their local environment as thiolates (RS-), serve as redox sensors by undergoing a multitude of oxidative PTMs (Ox-PTMs). Ox-PTMs such as S-nitrosylation or formation of inter- or intra-disulfide bridges induce functional changes in these proteins. Proteins containing cysteines, whose thiol oxidation state regulates their functions, belong to the so-called redoxome. Such Ox-PTMs are controlled by site-specific cellular events that play a crucial role in protein regulation, affecting enzyme catalytic sites, ligand binding affinity, protein-protein interactions or protein stability. Reversible protein thiol oxidation is an essential regulatory mechanism of photosynthesis, metabolism, and gene expression in all photosynthetic organisms. Therefore, studying PTMs will remain crucial for understanding plant adaptation to external stimuli like fluctuating light conditions. Optimizing methods suitable for studying plants Ox-PTMs is of high importance for elucidation of the redoxome in plants. This study focusses on thiol modifications occurring in plant and provides novel insight into in vivo redoxome of Arabidopsis thaliana in response to light vs. dark. This was achieved by utilizing a resin-assisted thiol enrichment approach. Furthermore, confirmation of candidates on the single protein level was carried out by a differential labelling approach. The thiols and disulfides were differentially labelled, and the protein levels were detected using immunoblot analysis. Further analysis was focused on light-reduced proteins. By the enrichment approach many well studied redox-regulated proteins were identified. Amongst those were fructose 1,6-bisphosphatase (FBPase) and sedoheptulose-1,7-bisphosphatase (SBPase) which have previously been described as thioredoxin system targeted enzymes. The redox regulated proteins identified in the current study were compared to several published, independent results showing redox regulated proteins in Arabidopsis leaves, root, mitochondria and specifically S-nitrosylated proteins. These proteins were excluded as potential new candidates but remain as a proof-of-concept to the enrichment experiments to be effective. Additionally, CSP41A and CSP41B proteins, which emerged from this study as potential targets of redox-regulation, were analyzed by Ribo-Seq. The active translatome study of csp41a mutant vs. wild-type showed most of the significant changes at end of the night, similarly as csp41b. Yet, in both mutants only several chloroplast-encoded genes were altered. Further studies of CSP41A and CSP41B proteins are needed to reveal their functions and elucidate the role of redox regulation of these proteins.},
  language  = {en}
}
@phdthesis{Tunn2020,
  author    = {Tunn, Isabell},
  title     = {From single molecules to bulk materials: tuning the viscoelastic properties of coiled coil cross-linked hydrogels},
  doi       = {10.25932/publishup-47595},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-475955},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XVI, 140},
  year      = {2020},
  abstract  = {The development of bioinspired self-assembling materials, such as hydrogels, with promising applications in cell culture, tissue engineering and drug delivery is a current focus in material science. Biogenic or bioinspired proteins and peptides are frequently used as versatile building blocks for extracellular matrix (ECM) mimicking hydrogels. However, precisely controlling and reversibly tuning the properties of these building blocks and the resulting hydrogels remains challenging. Precise control over the viscoelastic properties and self-healing abilities of hydrogels are key factors for developing intelligent materials to investigate cell matrix interactions. Thus, there is a need to develop building blocks that are self-healing, tunable and self-reporting. This thesis aims at the development of α-helical peptide building blocks, called coiled coils (CCs), which integrate these desired properties. Self-healing is a direct result of the fast self-assembly of these building blocks when used as material cross-links. Tunability is realized by means of reversible histidine (His)-metal coordination bonds. Lastly, implementing a fluorescent readout, which indicates the CC assembly state, self-reporting hydrogels are obtained. Coiled coils are abundant protein folding motifs in Nature, which often have mechanical function, such as in myosin or fibrin. Coiled coils are superhelices made up of two or more α-helices wound around each other. The assembly of CCs is based on their repetitive sequence of seven amino acids, so-called heptads (abcdefg). Hydrophobic amino acids in the a and d position of each heptad form the core of the CC, while charged amino acids in the e and g position form ionic interactions. The solvent-exposed positions b, c and f are excellent targets for modifications since they are more variable. His-metal coordination bonds are strong, yet reversible interactions formed between the amino acid histidine and transition metal ions (e.g. Ni2+, Cu2+ or Zn2+). His-metal coordination bonds essentially contribute to the mechanical stability of various high-performance proteinaceous materials, such as spider fangs, Nereis worm jaws and mussel byssal threads. Therefore, I bioengineered reversible His-metal coordination sites into a well-characterized heterodimeric CC that served as tunable material cross-link. Specifically, I took two distinct approaches facilitating either intramolecular (Chapter 4.2) and/or intermolecular (Chapter 4.3) His-metal coordination. Previous research suggested that force-induced CC unfolding in shear geometry starts from the points of force application. In order to tune the stability of a heterodimeric CC in shear geometry, I inserted His in the b and f position at the termini of force application (Chapter 4.2). The spacing of His is such that intra-CC His-metal coordination bonds can form to bridge one helical turn within the same helix, but also inter-CC coordination bonds are not generally excluded. Starting with Ni2+ ions, Raman spectroscopy showed that the CC maintained its helical structure and the His residues were able to coordinate Ni2+. Circular dichroism (CD) spectroscopy revealed that the melting temperature of the CC increased by 4 °C in the presence of Ni2+. Using atomic force microscope (AFM)-based single molecule force spectroscopy, the energy landscape parameters of the CC were characterized in the absence and the presence of Ni2+. His-Ni2+ coordination increased the rupture force by ~10 pN, accompanied by a decrease of the dissociation rate constant. To test if this stabilizing effect can be transferred from the single molecule level to the bulk viscoelastic material properties, the CC building block was used as a non-covalent cross-link for star-shaped poly(ethylene glycol) (star-PEG) hydrogels. Shear rheology revealed a 3-fold higher relaxation time in His-Ni2+ coordinating hydrogels compared to the hydrogel without metal ions. This stabilizing effect was fully reversible when using an excess of the metal chelator ethylenediaminetetraacetate (EDTA). The hydrogel properties were further investigated using different metal ions, i.e. Cu2+, Co2+ and Zn2+. Overall, these results suggest that Ni2+, Cu2+ and Co2+ primarily form intra-CC coordination bonds while Zn2+ also participates in inter-CC coordination bonds. This may be a direct result of its different coordination geometry. Intermolecular His-metal coordination bonds in the terminal regions of the protein building blocks of mussel byssal threads are primarily formed by Zn2+ and were found to be intimately linked to higher-order assembly and self-healing of the thread. In the above example, the contribution of intra-CC and inter-CC His-Zn2+ cannot be disentangled. In Chapter 4.3, I redesigned the CC to prohibit the formation of intra-CC His-Zn2+ coordination bonds, focusing only on inter-CC interactions. Specifically, I inserted His in the solvent-exposed f positions of the CC to focus on the effect of metal-induced higher-order assembly of CC cross-links. Raman and CD spectroscopy revealed that this CC building block forms α-helical Zn2+ cross-linked aggregates. Using this CC as a cross-link for star-PEG hydrogels, I showed that the material properties can be switched from viscoelastic in the absence of Zn2+ to elastic-like in the presence of Zn2+. Moreover, the relaxation time of the hydrogel was tunable over three orders of magnitude when using different Zn2+:His ratios. This tunability is attributed to a progressive transformation of single CC cross-links into His-Zn2+ cross-linked aggregates, with inter-CC His-Zn2+ coordination bonds serving as an additional, cross-linking mode. Rheological characterization of the hydrogels with inter-CC His-Zn2+ coordination raised the question whether the His-Zn2+ coordination bonds between CCs or also the CCs themselves rupture when shear strain is applied. In general, the amount of CC cross-links initially formed in the hydrogel as well as the amount of CC cross-links breaking under force remains to be elucidated. In order to more deeply probe these questions and monitor the state of the CC cross-links when force is applied, a fluorescent reporter system based on F{\"o}rster resonance energy transfer (FRET) was introduced into the CC (Chapter 4.4). For this purpose, the donor-acceptor pair carboxyfluorescein and tetramethylrhodamine was used. The resulting self-reporting CC showed a FRET efficiency of 77 \% in solution. Using this fluorescently labeled CC as a self-reporting, reversible cross-link in an otherwise covalently cross-linked star-PEG hydrogel enabled the detection of the FRET efficiency change under compression force. This proof-of-principle result sets the stage for implementing the fluorescently labeled CCs as molecular force sensors in non-covalently cross-linked hydrogels. In summary, this thesis highlights that rationally designed CCs are excellent reversibly tunable, self-healing and self-reporting hydrogel cross-links with high application potential in bioengineering and biomedicine. For the first time, I demonstrated that His-metal coordination-based stabilization can be transferred from the single CC level to the bulk material with clear viscoelastic consequences. Insertion of His in specific sequence positions was used to implement a second non-covalent cross-linking mode via intermolecular His-metal coordination. This His-metal binding induced aggregation of the CCs enabled for reversibly tuning the hydrogel properties from viscoelastic to elastic-like. As a proof-of-principle to establish self-reporting CCs as material cross-links, I labeled a CC with a FRET pair. The fluorescently labelled CC acts as a molecular force sensor and first preliminary results suggest that the CC enables the detection of hydrogel cross-link failure under compression force. In the future, fluorescently labeled CC force sensors will likely not only be used as intelligent cross-links to study the failure of hydrogels but also to investigate cell-matrix interactions in 3D down to the single molecule level.},
  language  = {en}
}
@phdthesis{Wen2020,
  author    = {Wen, Xi},
  title     = {Distribution patterns and environmental drivers of methane-cycling microorganisms in natural environments and restored wetlands},
  doi       = {10.25932/publishup-47177},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471770},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VIII, iii, 152},
  year      = {2020},
  abstract  = {Methane is an important greenhouse gas contributing to global climate change. Natural environments and restored wetlands contribute a large proportion to the global methane budget. Methanogenic archaea (methanogens) and methane oxidizing bacteria (methanotrophs), the biogenic producers and consumers of methane, play key roles in the methane cycle in those environments. A large number of studies revealed the distribution, diversity and composition of these microorganisms in individual habitats. However, uncertainties exist in predicting the response and feedback of methane-cycling microorganisms to future climate changes and related environmental changes due to the limited spatial scales considered so far, and due to a poor recognition of the biogeography of these important microorganisms combining global and local scales. With the aim of improving our understanding about whether and how methane-cycling microbial communities will be affected by a series of dynamic environmental factors in response to climate change, this PhD thesis investigates the biogeographic patterns of methane-cycling communities, and the driving factors which define these patterns at different spatial scales. At the global scale, a meta-analysis was performed by implementing 94 globally distributed public datasets together with environmental data from various natural environments including soils, lake sediments, estuaries, marine sediments, hydrothermal sediments and mud volcanos. In combination with a global biogeographic map of methanogenic archaea from multiple natural environments, this thesis revealed that biogeographic patterns of methanogens exist. The terrestrial habitats showed higher alpha diversities than marine environments. Methanoculleus and Methanosaeta (Methanothrix) are the most frequently detected taxa in marine habitats, while Methanoregula prevails in terrestrial habitats. Estuary ecosystems, the transition zones between marine and terrestrial/limnic ecosystems, have the highest methanogenic richness but comparably low methane emission rates. At the local scale, this study compared two rewetted fens with known high methane emissions in northeastern Germany, a coastal brackish fen (H{\"u}telmoor) and a freshwater riparian fen (Polder Zarnekow). Consistent with different geochemical conditions and land-use history, the two rewetted fens exhibit dissimilar methanogenic and, especially, methanotrophic community compositions. The methanotrophic community was generally under-represented among the prokaryotic communities and both fens show similarly low ratios of methanotrophic to methanogenic abundances. Since few studies have characterized methane-cycling microorganisms in rewetted fens, this study provides first evidence that the rapid and well re-established methanogenic community in combination with the low and incomplete re-establishment of the methanotrophic community after rewetting contributes to elevated sustained methane fluxes following rewetting. Finally, this thesis demonstrates that dispersal limitation only slightly regulates the biogeographic distribution patterns of methanogenic microorganisms in natural environments and restored wetlands. Instead, their existence, adaption and establishment are more associated with the selective pressures under different environmental conditions. Salinity, pH and temperature are identified as the most important factors in shaping microbial community structure at different spatial scales (global versus terrestrial environments). Predicted changes in climate, such as increasing temperature, changes in precipitation patterns and increasing frequency of flooding events, are likely to induce a series of environmental alterations, which will either directly or indirectly affect the driving environmental forces of methanogenic communities, leading to changes in their community composition and thus potentially also in methane emission patterns in the future.},
  language  = {en}
}
@phdthesis{Wenk2020,
  author    = {Wenk, Sebastian},
  title     = {Engineering formatotrophic growth in Escherichia coli},
  school      = {Universit{\"a}t Potsdam},
  pages     = {V, 107},
  year      = {2020},
  abstract  = {To meet the demands of a growing world population while reducing carbon dioxide (CO2) emissions, it is necessary to capture CO2 and convert it into value-added compounds. In recent years, metabolic engineering of microbes has gained strong momentum as a strategy for the production of valuable chemicals. As common microbial feedstocks like glucose directly compete with human consumption, the one carbon (C1) compound formate was suggested as an alternative feedstock. Formate can be easily produced by various means including electrochemical reduction of CO2 and could serve as a feedstock for microbial production, hence presenting a novel entry point for CO2 to the biosphere and a storage option for excess electricity. Compared to the gaseous molecule CO2, formate is a highly soluble compound that can be easily handled and stored. It can serve as a carbon and energy source for natural formatotrophs, but these microbes are difficult to cultivate and engineer. In this work, I present the results of several projects that aim to establish efficient formatotrophic growth of E. coli - which cannot naturally grow on formate - via synthetic formate assimilation pathways. In the first study, I establish a workflow for growth-coupled metabolic engineering of E. coli. I demonstrate this approach by presenting an engineering scheme for the PFL-threonine cycle, a synthetic pathway for anaerobic formate assimilation in E. coli. The described methods are intended to create a standardized toolbox for engineers that aim to establish novel metabolic routes in E. coli and related organisms. The second chapter presents a study on the catalytic efficiency of C1-oxidizing enzymes in vivo. As formatotrophic growth requires generation of both energy and biomass from formate, the engineered E. coli strains need to be equipped with a highly efficient formate dehydrogenase, which provides reduction equivalents and ATP for formate assimilation. I engineered a strain that cannot generate reducing power and energy for cellular growth, when fed on acetate. Under this condition, the strain depends on the introduction of an enzymatic system for NADH regeneration, which could further produce ATP via oxidative phosphorylation. I show that the strain presents a valuable testing platform for C1-oxidizing enzymes by testing different NAD-dependent formate and methanol dehydrogenases in the energy auxotroph strain. Using this platform, several candidate enzymes with high in vivo activity, were identified and characterized as potential energy-generating systems for synthetic formatotrophic or methylotrophic growth in E. coli.   In the third chapter, I present the establishment of the serine threonine cycle (STC) - a synthetic formate assimilation pathway - in E. coli. In this pathway, formate is assimilated via formate tetrahydrofolate ligase (FtfL) from Methylobacterium extorquens (M. extorquens). The carbon from formate is attached to glycine to produce serine, which is converted into pyruvate entering central metabolism. Via the natural threonine synthesis and cleavage route, glycine is regenerated and acetyl-CoA is produced as the pathway product. I engineered several selection strains that depend on different STC modules for growth and determined key enzymes that enable high flux through threonine synthesis and cleavage. I could show that expression of an auxiliary formate dehydrogenase was required to achieve growth via threonine synthesis and cleavage on pyruvate. By overexpressing most of the pathway enzymes from the genome, and applying adaptive laboratory evolution, growth on glycine and formate was achieved, indicating the activity of the complete cycle. The fourth chapter shows the establishment of the reductive glycine pathway (rGP) - a short, linear formate assimilation route - in E. coli. As in the STC, formate is assimilated via M. extorquens FtfL. The C1 from formate is condensed with CO2 via the reverse reaction of the glycine cleavage system to produce glycine. Another carbon from formate is attached to glycine to form serine, which is assimilated into central metabolism via pyruvate. The engineered E. coli strain, expressing most of the pathway genes from the genome, can grow via the rGP with formate or methanol as a sole carbon and energy source.},
  language  = {en}
}
@phdthesis{Zhang2020,
  author    = {Zhang, Jianrui},
  title     = {Completely water-based emulsions as compartmentalized systems via pickering stabilization},
  doi       = {10.25932/publishup-47654},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476542},
  school      = {Universit{\"a}t Potsdam},
  pages     = {II, 119},
  year      = {2020},
  abstract  = {Completely water-based systems are of interest for the development of novel material for various reasons: On one hand, they provide benign environment for biological systems and on the other hand they facilitate effective molecular transport in a membrane-free environment. In order to investigate the general potential of aqueous two-phase systems (ATPSs) for biomaterials and compartmentalized systems, various solid particles were applied to stabilize all-aqueous emulsion droplets. The target ATPS to be investigated should be prepared via mixing of two aqueous solutions of water-soluble polymers, which turn biphasic when exceeding a critical polymer concentration. Hydrophilic polymers with a wide range of molar mass such as dextran/poly(ethylene glycol) (PEG) can therefore be applied. Solid particles adsorbed at the interfaces can be exceptionally efficient stabilizers forming so-called Pickering emulsions, and nanoparticles can bridge the correlation length of polymer solutions and are thereby the best option for water-in-water emulsions. The first approach towards the investigation of ATPS was conducted with all aqueous dextran-PEG emulsions in the presence of poly(dopamine) particles (PDP) in Chapter 4. The water-in-water emulsions were formed with a PEG/dextran system via utilizing PDP as stabilizers. Studies of the formed emulsions were performed via laser scanning confocal microscope (CLSM), optical microscope (OM), cryo-scanning electron microscope (SEM) and tensiometry. The stable emulsions (at least 16 weeks) were demulsified easily via dilution or surfactant addition. Furthermore, the solid PDP at the water-water interface were crosslinked in order to inhibit demulsification of the Pickering emulsion. Transmission electron microscope (TEM) and scanning electron microscope (SEM) were used to visualize the morphology of PDP before and after crosslinking. PDP stabilized water-in-water emulsions were utilized in the following Chapter 5 to form supramolecular compartmentalized hydrogels. Here, hydrogels were prepared in pre-formed water-in-water emulsions and gelled via α-cyclodextrin-PEG (α-CD-PEG) inclusion complex formation. Studies of the formed complexes were performed via X-ray powder diffraction (XRD) and the mechanical properties of the hydrogels were measured with oscillatory shear rheology. In order to verify the compartmentalized state and its triggered decomposition, hydrogels and emulsions were assessed via OM, SEM and CLSM. The last chapter broadens the investigations from the previous two systems by utilizing various carbon nitrides (CN) as different stabilizers in ATPS. CN introduces another way to trigger demulsification, namely irradiation with visible light. Therefore, emulsification and demulsification with various triggers were probed. The investigated all aqueous multi-phase systems will act as model for future fabrication of biocompatible materials, cell micropatterning as well as separation of compartmentalized systems.},
  language  = {en}
}
@phdthesis{Šustr2020,
  author    = {Šustr, David},
  title     = {Molecular diffusion in polyelectrolyte multilayers},
  doi       = {10.25932/publishup-48903},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489038},
  school      = {Universit{\"a}t Potsdam},
  pages     = {106},
  year      = {2020},
  abstract  = {Research on novel and advanced biomaterials is an indispensable step towards their applications in desirable fields such as tissue engineering, regenerative medicine, cell culture, or biotechnology. The work presented here focuses on such a promising material: polyelectrolyte multilayer (PEM) composed of hyaluronic acid (HA) and poly(L-lysine) (PLL). This gel-like polymer surface coating is able to accumulate (bio-)molecules such as proteins or drugs and release them in a controlled manner. It serves as a mimic of the extracellular matrix (ECM) in composition and intrinsic properties. These qualities make the HA/PLL multilayers a promising candidate for multiple bio-applications such as those mentioned above. The work presented aims at the development of a straightforward approach for assessment of multi-fractional diffusion in multilayers (first part) and at control of local molecular transport into or from the multilayers by laser light trigger (second part). The mechanism of the loading and release is governed by the interaction of bioactives with the multilayer constituents and by the diffusion phenomenon overall. The diffusion of a molecule in HA/PLL multilayers shows multiple fractions of different diffusion rate. Approaches, that are able to assess the mobility of molecules in such a complex system, are limited. This shortcoming motivated the design of a novel evaluation tool presented here. The tool employs a simulation-based approach for evaluation of the data acquired by fluorescence recovery after photobleaching (FRAP) method. In this approach, possible fluorescence recovery scenarios are primarily simulated and afterwards compared with the data acquired while optimizing parameters of a model until a sufficient match is achieved. Fluorescent latex particles of different sizes and fluorescein in an aqueous medium are utilized as test samples validating the analysis results. The diffusion of protein cytochrome c in HA/PLL multilayers is evaluated as well. This tool significantly broadens the possibilities of analysis of spatiotemporal FRAP data, which originate from multi-fractional diffusion, while striving to be widely applicable. This tool has the potential to elucidate the mechanisms of molecular transport and empower rational engineering of the drug release systems. The second part of the work focuses on the fabrication of such a spatiotemporarily-controlled drug release system employing the HA/PLL multilayer. This release system comprises different layers of various functionalities that together form a sandwich structure. The bottom layer, which serves as a reservoir, is formed by HA/PLL PEM deposited on a planar glass substrate. On top of the PEM, a layer of so-called hybrids is deposited. The hybrids consist of thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) -based hydrogel microparticles with surface-attached gold nanorods. The layer of hybrids is intended to serve as a gate that controls the local molecular transport through the PEM-solution-interface. The possibility of stimulating the molecular transport by near-infrared (NIR) laser irradiation is being explored. From several tested approaches for the deposition of hybrids onto the PEM surface, the drying-based approach was identified as optimal. Experiments, that examine the functionality of the fabricated sandwich at elevated temperature, document the reversible volume phase transition of the PEM-attached hybrids while sustaining the sandwich stability. Further, the gold nanorods were shown to effectively absorb light radiation in the tissue- and cell-friendly NIR spectral region while transducing the energy of light into heat. The rapid and reversible shrinkage of the PEM-attached hybrids was thereby achieved. Finally, dextran was employed as a model transport molecule. It loads into the PEM reservoir in a few seconds with the partition constant of 2.4, while it spontaneously releases in a slower, sustained manner. The local laser irradiation of the sandwich, which contains the fluorescein isothiocyanate tagged dextran, leads to a gradual reduction of fluorescence intensity in the irradiated region. The release system fabricated employs renowned photoresponsivity of the hybrids in an innovative setting. The results of the research are a step towards a spatially-controlled on-demand drug release system that paves the way to spatiotemporally controlled drug release. The approaches developed in this work have the potential to elucidate the molecular dynamics in ECM and to foster engineering of multilayers with properties tuned to mimic the ECM. The work aims at spatiotemporal control over the diffusion of bioactives and their presentation to the cells.},
  language  = {en}
}