@article{AichnerHiltPerillonetal.2017,
  author    = {Aichner, Bernhard and Hilt, Sabine and Perillon, Cecile and Gillefalk, Mikael and Sachse, Dirk},
  title     = {Biosynthetic hydrogen isotopic fractionation factors during lipid synthesis in submerged aquatic macrophytes: Effect of groundwater discharge and salinity},
  series = {Organic geochemistry : the international journal for rapid publication of current research in organic geochemistry and biochemistry},
  volume    = {113},
  journal   = {Organic geochemistry : the international journal for rapid publication of current research in organic geochemistry and biochemistry},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0146-6380},
  doi       = {10.1016/j.orggeochem.2017.07.021},
  pages     = {10 -- 16},
  year      = {2017},
  abstract  = {Sedimentary lipid biomarkers have become widely used tools for reconstructing past climatic and ecological changes due to their ubiquitous occurrence in lake sediments. In particular, the hydrogen isotopic composition (expressed as delta D values) of leaf wax lipids derived from terrestrial plants has been a focus of research during the last two decades and the understanding of competing environmental and plant physiological factors influencing the delta D values has greatly improved. Comparatively less attention has been paid to lipid biomarkers derived from aquatic plants, although these compounds are abundant in many lacustrine sediments. We therefore conducted a field and laboratory experiment to study the effect of salinity and groundwater discharge on the isotopic composition of aquatic plant biomarkers. We analyzed samples of the common submerged plant species, Potamogeton pectinatus (sago pondweed), which has a wide geographic distribution and can tolerate high salinity. We tested the effect of groundwater discharge (characterized by more negative delta D values relative to lake water) and salinity on the delta D values of n-alkanes from P. pectinatus by comparing plants (i) collected from the oligotrophic freshwater Lake Stechlin (Germany) at shallow littoral depth from locations with and without groundwater discharge, and (ii) plants grown from tubers collected from the eutrophic Lake Muggelsee in nutrient solution at four salinity levels. Isotopically depleted groundwater did not have a significant influence on the delta D values of n-alkanes in Lake Stechlin P. pectinatus and calculated isotopic fractionation factors epsilon(l/w) between lake water and n-alkanes averaged -137 +/- 9\%(n-C-23), -136 +/- 7\%(n-C-25) and -131 +/- 6\%(n-C-27), respectively. Similar epsilon values were calculated for plants from Lake Muggelsee grown in freshwater nutrient solution (-134 +/- 11\% for n-C-23), while greater fractionation was observed at increased salinity values of 10 (163 +/- 12\%) and 15(-172 +/- 15\%). We therefore suggest an average e value of -136 +/- 9\% between source water and the major n-alkanes in P. pectinatus grown under freshwater conditions. Our results demonstrate that isotopic fractionation can increase by 30-40\% at salinity values 10 and 15. These results could be explained either by inhibited plant growth at higher salinity, or by metabolic adaptation to salt stress that remain to be elucidated. A potential salinity effect on dD values of aquatic lipids requires further examination, since this would impact on the interpretation of downcore isotopic data in paleohydrologic studies. (C) 2017 Elsevier Ltd. All rights reserved.},
  language  = {en}
}
@article{AichnerMakhmudovRajabovetal.2019,
  author    = {Aichner, Bernhard and Makhmudov, Zafar and Rajabov, Iljomjon and Zhang, Qiong and Pausata, Francesco Salvatore R. and Werner, Martin and Heinecke, Liv and Kuessner, Marie L. and Feakins, Sarah J. and Sachse, Dirk and Mischke, Steffen},
  title     = {Hydroclimate in the Pamirs Was Driven by Changes in Precipitation-Evaporation Seasonality Since theLast Glacial Period},
  series = {Geophysical research letters},
  volume    = {46},
  journal   = {Geophysical research letters},
  number    = {23},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0094-8276},
  doi       = {10.1029/2019GL085202},
  pages     = {13972 -- 13983},
  year      = {2019},
  abstract  = {The Central Asian Pamir Mountains (Pamirs) are a high-altitude region sensitive to climatic change, with only few paleoclimatic records available. To examine the glacial-interglacial hydrological changes in the region, we analyzed the geochemical parameters of a 31-kyr record from Lake Karakul and performed a set of experiments with climate models to interpret the results. delta D values of terrestrial biomarkers showed insolation-driven trends reflecting major shifts of water vapor sources. For aquatic biomarkers, positive delta D shifts driven by changes in precipitation seasonality were observed at ca. 31-30, 28-26, and 17-14 kyr BP. Multiproxy paleoecological data and modelling results suggest that increased water availability, induced by decreased summer evaporation, triggered higher lake levels during those episodes, possibly synchronous to northern hemispheric rapid climate events. We conclude that seasonal changes in precipitation-evaporation balance significantly influenced the hydrological state of a large waterbody such as Lake Karakul, while annual precipitation amount and inflows remained fairly constant.},
  language  = {en}
}
@article{AikenAikenCotton2018,
  author    = {Aiken, John M. and Aiken, Chastity and Cotton, Fabrice},
  title     = {A python library for teaching computation to seismology students},
  series = {Seismological research letters},
  volume    = {89},
  journal   = {Seismological research letters},
  number    = {3},
  publisher = {Seismological Society of America},
  address   = {Albany},
  issn      = {0895-0695},
  doi       = {10.1785/0220170246},
  pages     = {1165 -- 1171},
  year      = {2018},
  abstract  = {Python is at the forefront of scientific computation for seismologists and therefore should be introduced to students interested in becoming seismologists. On its own, Python is open source and well designed with extensive libraries. However, Python code can also be executed, visualized, and communicated to others with "Jupyter Notebooks". Thus, Jupyter Notebooks are ideal for teaching students Python and scientific computation. In this article, we designed an openly available Python library and collection of Jupyter Notebooks based on defined scientific computation learning goals for seismology students. The Notebooks cover topics from an introduction to Python to organizing data, earthquake catalog statistics, linear regression, and making maps. Our Python library and collection of Jupyter Notebooks are meant to be used as course materials for an upper-division data analysis course in an Earth Science Department, and the materials were tested in a Probabilistic Seismic Hazard course. However, seismologists or anyone else who is interested in Python for data analysis and map making can use these materials.},
  language  = {en}
}
@article{AkalKoralayCandanetal.2011,
  author    = {Akal, Cuneyt and Koralay, O. Ersin and Candan, Osman and Oberh{\"a}nsli, Roland and Chen, Fukun},
  title     = {Geodynamic significance of the early triassic karaburun granitoid (Western Turkey) for the opening history of Neo-Tethys},
  series = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi},
  volume    = {20},
  journal   = {Turkish journal of earth sciences = T{\"u}rk yerbilimleri dergisi},
  number    = {3},
  publisher = {T{\"u}bitak},
  address   = {Ankara},
  issn      = {1300-0985},
  doi       = {10.3906/yer-1008-1},
  pages     = {255 -- 271},
  year      = {2011},
  abstract  = {The Karaburun Peninsula, which is considered part of the Anatolide-Tauride Block of Turkey, contains clastic and carbonate sequences deposited on the northern margin of Gondwana. The Palaeozoic clastic sequence, which is intruded by the Early Triassic granitoid and tectonically overlies a Mesozoic melange sequence, can be divided into three subunits: a lower clastic subunit consisting of a sandstone-shale alternation, an upper clastic subunit consisting of black chert-bearing shales, sandstone and conglomerate, and a Permo-Carboniferous carbonate subunit. The lower Triassic Karaburun I-type granitoid has a high initial Sr-87/Sr-86 ratio (0.709021-0.709168), and low Nd-143/Nd-144 ratio (0.512004-0.512023) and epsilon Nd (-5.34 to -5.70) isotopic values. Geochronological data indicate a crystallization (intrusion) age of 247.1 +/- 2.0 Ma (Scythian). Geochemically, the acidic magmatism reflects a subduction-related continental-arc basin tectonic setting, which can be linked to the opening of the northern branch of Neo-Tethys as a continental back-arc rifting basin on the northern margin of Gondwana. This can be related to the closure through southward subduction of the Palaeotethys Ocean beneath Gondwana.},
  language  = {en}
}
@article{AkalCandanKoralayetal.2012,
  author    = {Akal, C{\"u}neyt and Candan, Osman and Koralay, O. Ersin and Oberh{\"a}nsli, Roland and Chen, Fukun and Prelevic, Dejan},
  title     = {Early Triassic potassic volcanism in the Afyon Zone of the Anatolides/Turkey - implications for the rifting of the Neo-Tethys},
  series = {International journal of earth sciences},
  volume    = {101},
  journal   = {International journal of earth sciences},
  number    = {1},
  publisher = {Springer},
  address   = {New York},
  issn      = {1437-3254},
  doi       = {10.1007/s00531-011-0654-2},
  pages     = {177 -- 194},
  year      = {2012},
  abstract  = {Afyon Zone, which was derived from the Anatolide-Tauride platform during closure of the Neo-Tethys, is made up of pre-Mesozoic basement and unconformably overlying Triassic-Early Tertiary cover series. The Afyon Zone contains widespread metavolcanic rocks, which are dominated by rhyolite, dacite, and trachyandesite. They form a distinct volcanic succession, which is separated from the underlying Silurian-Lower Carboniferous metacarbonates and meta-siliciclastics by a regional unconformity. Trachyandesitic metavolcanics are made up of massive lava flows, pyroclastics and epiclastics, less frequently, domes and dikes, which were developed on a deeply eroded subaerial landmass. U/Pb and Pb/Pb zircon geochronology yielded Lower Triassic (similar to 250 Ma) ages, which are interpreted as extrusion age of trachyandesitic volcanics. Based on the stratigraphic, geochronological, and geochemical data, we suggest that these Lower Triassic magmatic rocks represent an extensional tectonic setting on the northern active margin of the Gondwana, which led to the development of the northern branch of the Neo-Tethys.},
  language  = {en}
}
@article{AlAtikAbrahamsonBommeretal.2010,
  author    = {Al Atik, Linda and Abrahamson, Norman A. and Bommer, Julian J. and Scherbaum, Frank and Cotton, Fabrice and Kuehn, Nicolas},
  title     = {The variability of ground-motion prediction models and its components},
  issn      = {0895-0695},
  doi       = {10.1785/gssrl.81.5.794},
  year      = {2010},
  language  = {en}
}
@phdthesis{AlHalbouni2019,
  author    = {Al-Halbouni, Djamil},
  title     = {Photogrammetry and distinct element geomechanical modelling of sinkholes and large-scale karstic depressions},
  doi       = {10.25932/publishup-43215},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432159},
  school      = {Universit{\"a}t Potsdam},
  pages     = {137},
  year      = {2019},
  abstract  = {Sinkholes and depressions are typical landforms of karst regions. They pose a considerable natural hazard to infrastructure, agriculture, economy and human life in affected areas worldwide. The physio-chemical processes of sinkholes and depression formation are manifold, ranging from dissolution and material erosion in the subsurface to mechanical subsidence/failure of the overburden. This thesis addresses the mechanisms leading to the development of sinkholes and depressions by using complementary methods: remote sensing, distinct element modelling and near-surface geophysics. In the first part, detailed information about the (hydro)-geological background, ground structures, morphologies and spatio-temporal development of sinkholes and depressions at a very active karst area at the Dead Sea are derived from satellite image analysis, photogrammetry and geologic field surveys. There, clusters of an increasing number of sinkholes have been developing since the 1980s within large-scale depressions and are distributed over different kinds of surface materials: clayey mud, sandy-gravel alluvium and lacustrine evaporites (salt). The morphology of sinkholes differs depending in which material they form: Sinkholes in sandy-gravel alluvium and salt are generally deeper and narrower than sinkholes in the interbedded evaporite and mud deposits. From repeated aerial surveys, collapse precursory features like small-scale subsidence, individual holes and cracks are identified in all materials. The analysis sheds light on the ongoing hazardous subsidence process, which is driven by the base-level fall of the Dead Sea and by the dynamic formation of subsurface water channels. In the second part of this thesis, a novel, 2D distinct element geomechanical modelling approach with the software PFC2D-V5 to simulating individual and multiple cavity growth and sinkhole and large-scale depression development is presented. The approach involves a stepwise material removal technique in void spaces of arbitrarily shaped geometries and is benchmarked by analytical and boundary element method solutions for circular cavities. Simulated compression and tension tests are used to calibrate model parameters with bulk rock properties for the materials of the field site. The simulations show that cavity and sinkhole evolution is controlled by material strength of both overburden and cavity host material, the depth and relative speed of the cavity growth and the developed stress pattern in the subsurface. Major findings are: (1) A progressively deepening differential subrosion with variable growth speed yields a more fragmented stress pattern with stress interaction between the cavities. It favours multiple sinkhole collapses and nesting within large-scale depressions. (2) Low-strength materials do not support large cavities in the material removal zone, and subsidence is mainly characterised by gradual sagging into the material removal zone with synclinal bending. (3) High-strength materials support large cavity formation, leading to sinkhole formation by sudden collapse of the overburden. (4) Large-scale depression formation happens either by coalescence of collapsing holes, block-wise brittle failure, or gradual sagging and lateral widening. The distinct element based approach is compared to results from remote sensing and geophysics at the field site. The numerical simulation outcomes are generally in good agreement with derived morphometrics, documented surface and subsurface structures as well as seismic velocities. Complementary findings on the subrosion process are provided from electric and seismic measurements in the area. Based on the novel combination of methods in this thesis, a generic model of karst landform evolution with focus on sinkhole and depression formation is developed. A deepening subrosion system related to preferential flow paths evolves and creates void spaces and subsurface conduits. This subsequently leads to hazardous subsidence, and the formation of sinkholes within large-scale depressions. Finally, a monitoring system for shallow natural hazard phenomena consisting of geodetic and geophysical observations is proposed for similarly affected areas.},
  language  = {en}
}
@misc{AlHalbouniHolohanTaherietal.2018,
  author    = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Sch{\"o}pfer, Martin P. J. and Emam, Sacha and Dahm, Torsten},
  title     = {Geomechanical modelling of sinkhole development using distinct elements},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1061},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46843},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-468435},
  pages     = {35},
  year      = {2018},
  abstract  = {Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth ∕ diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth ∕ diameter values in each material type may partly reflect sinkhole growth trends.},
  language  = {en}
}
@article{AlHalbouniHolohanTaherietal.2018,
  author    = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Sch{\"o}pfer, Martin P. J. and Emam, Sacha and Dahm, Torsten},
  title     = {Geomechanical modelling of sinkhole development using distinct elements},
  series = {Solid earth},
  volume    = {9},
  journal   = {Solid earth},
  number    = {6},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1869-9510},
  doi       = {10.5194/se-9-1341-2018},
  pages     = {1341 -- 1373},
  year      = {2018},
  abstract  = {Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth / diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth / diameter values in each material type may partly reflect sinkhole growth trends.},
  language  = {en}
}
@article{AlHalbouniHolohanTaherietal.2019,
  author    = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Watson, Robert A. and Polom, Ulrich and Schoepfer, Martin P. J. and Emam, Sacha and Dahm, Torsten},
  title     = {Distinct element geomechanical modelling of the formation of sinkhole clusters within large-scale karstic depressions},
  series = {Solid earth},
  volume    = {10},
  journal   = {Solid earth},
  number    = {4},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1869-9510},
  doi       = {10.5194/se-10-1219-2019},
  pages     = {1219 -- 1241},
  year      = {2019},
  abstract  = {The 2-D distinct element method (DEM) code (PFC2D_V5) is used here to simulate the evolution of subsidence-related karst landforms, such as single and clustered sinkholes, and associated larger-scale depressions. Subsurface material in the DEM model is removed progressively to produce an array of cavities; this simulates a network of subsurface groundwater conduits growing by chemical/mechanical erosion. The growth of the cavity array is coupled mechanically to the gravitationally loaded surroundings, such that cavities can grow also in part by material failure at their margins, which in the limit can produce individual collapse sinkholes. Two end-member growth scenarios of the cavity array and their impact on surface subsidence were examined in the models: (1) cavity growth at the same depth level and growth rate; (2) cavity growth at progressively deepening levels with varying growth rates. These growth scenarios are characterised by differing stress patterns across the cavity array and its overburden, which are in turn an important factor for the formation of sinkholes and uvalalike depressions. For growth scenario (1), a stable compression arch is established around the entire cavity array, hindering sinkhole collapse into individual cavities and favouring block-wise, relatively even subsidence across the whole cavity array. In contrast, for growth scenario (2), the stress system is more heterogeneous, such that local stress concentrations exist around individual cavities, leading to stress interactions and local wall/overburden fractures. Consequently, sinkhole collapses occur in individual cavities, which results in uneven, differential subsidence within a larger-scale depression. Depending on material properties of the cavity-hosting material and the overburden, the larger-scale depression forms either by sinkhole coalescence or by widespread subsidence linked geometrically to the entire cavity array. The results from models with growth scenario (2) are in close agreement with surface morphological and subsurface geophysical observations from an evaporite karst area on the eastern shore of the Dead Sea.},
  language  = {en}
}
@article{AlMashaikhiOswaldAttingeretal.2012,
  author    = {Al-Mashaikhi, K. and Oswald, Sascha and Attinger, Sabine and B{\"u}chel, G. and Kn{\"o}ller, K. and Strauch, G.},
  title     = {Evaluation of groundwater dynamics and quality in the Najd aquifers located in the Sultanate of Oman},
  series = {Environmental earth sciences},
  volume    = {66},
  journal   = {Environmental earth sciences},
  number    = {4},
  publisher = {Springer},
  address   = {New York},
  issn      = {1866-6280},
  doi       = {10.1007/s12665-011-1331-2},
  pages     = {1195 -- 1211},
  year      = {2012},
  abstract  = {The Najd, Oman, is located in one of the most arid environments in the world. The groundwater in this region is occurring in four different aquifers A to D of the Hadhramaut Group consisting mainly of different types of limestone and dolomite. The quality of the groundwater is dominated by the major ions sodium, calcium, magnesium, sulphate, and chloride, but the hydrochemical character is varying among the four aquifers. Mineralization within the separate aquifers increases along the groundwater flow direction from south to north-northeast up to high saline sodium-chloride water in aquifer D in the northeast area of the Najd. Environmental isotope analyses of hydrogen and oxygen were conducted to monitor the groundwater dynamics and to evaluate the recharge conditions of groundwater into the Najd aquifers. Results suggest an earlier recharge into these aquifers as well as ongoing recharge takes place in the region down to present day. Mixing of modern and submodern waters was detected by water isotopes in aquifer D in the mountain chain (Jabal) area and along the northern side of the mountain range. In addition, delta H-2 and delta O-18 variations suggest that aquifers A, B, and C are assumed to be connected by faults and fractures, and interaction between the aquifers may occur. Low tritium concentrations support the mixing assumption in the recharge area. The knowledge about the groundwater development is an important factor for the sustainable use of water resources in the Dhofar region.},
  language  = {en}
}
@article{AlawiSchneiderKallmeyer2014,
  author    = {Alawi, Mashal and Schneider, Beate and Kallmeyer, Jens},
  title     = {A procedure for separate recovery of extra- and intracellular DNA from a single marine sediment sample},
  series = {Journal of microbiological methods},
  volume    = {104},
  journal   = {Journal of microbiological methods},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0167-7012},
  doi       = {10.1016/j.mimet.2014.06.009},
  pages     = {36 -- 42},
  year      = {2014},
  abstract  = {Extracellular DNA (eDNA) is a ubiquitous biological compound in aquatic sediment and soil. Previous studies suggested that eDNA plays an important role in biogeochemical element cycling, horizontal gene transfer and stabilization of biofilm structures. Previous methods for eDNA extraction were either not suitable for oligotrophic sediments or only allowed quantification but no genetic analyses. Our procedure is based on cell detachment and eDNA liberation from sediment particles by sequential washing with an alkaline sodium phosphate buffer followed by a separation of cells and eDNA. The separated eDNA is then bound onto silica particles and purified, whereas the intracellular DNA from the separated cells is extracted using a commercial kit. The method provides extra- and intracellular DNA of high purity that is suitable for downstream applications like PCR. Extracellular DNA was extracted from organic-rich shallow sediment of the Baltic Sea, glacially influenced sediment of the Barents Sea and from the oligotrophic South Pacific Gyre. The eDNA concentration in these samples varied from 23 to 626 ng g(-1) wet weight sediment. A number of experiments were performed to verify each processing step. Although extraction efficiency is higher than other published methods, it is not fully quantitative. (C) 2014 Elsevier B.V. All rights reserved.},
  language  = {en}
}
@article{AlbrechtMartinHaseloffetal.2011,
  author    = {Albrecht, Tanja and Martin, M. and Haseloff, M. and Winkelmann, Ricarda and Levermann, Anders},
  title     = {Parameterization for subgrid-scale motion of ice-shelf calving fronts},
  series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  volume    = {5},
  journal   = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  number    = {1},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1994-0416},
  doi       = {10.5194/tc-5-35-2011},
  pages     = {35 -- 44},
  year      = {2011},
  abstract  = {A parameterization for the motion of ice-shelf fronts on a Cartesian grid in finite-difference land-ice models is presented. The scheme prevents artificial thinning of the ice shelf at its edge, which occurs due to the finite resolution of the model. The intuitive numerical implementation diminishes numerical dispersion at the ice front and enables the application of physical boundary conditions to improve the calculation of stress and velocity fields throughout the ice-sheet-shelf system. Numerical properties of this subgrid modification are assessed in the Potsdam Parallel Ice Sheet Model (PISM-PIK) for different geometries in one and two horizontal dimensions and are verified against an analytical solution in a flow-line setup.},
  language  = {en}
}
@article{AlbrechtWinkelmannLevermann2020,
  author    = {Albrecht, Torsten and Winkelmann, Ricarda and Levermann, Anders},
  title     = {Glacial-cycle simulations of the Antarctic Ice Sheet with the Parallel Ice Sheet Model (PISM)},
  series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  volume    = {14},
  journal   = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  number    = {2},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1994-0416},
  doi       = {10.5194/tc-14-599-2020},
  pages     = {599 -- 632},
  year      = {2020},
  abstract  = {Simulations of the glacial-interglacial history of the Antarctic Ice Sheet provide insights into dynamic threshold behavior and estimates of the ice sheet's contributions to global sea-level changes for the past, present and future. However, boundary conditions are weakly constrained, in particular at the interface of the ice sheet and the bedrock. Also climatic forcing covering the last glacial cycles is uncertain, as it is based on sparse proxy data. <br /> We use the Parallel Ice Sheet Model (PISM) to investigate the dynamic effects of different choices of input data, e.g., for modern basal heat flux or reconstructions of past changes of sea level and surface temperature. As computational resources are limited, glacial-cycle simulations are performed using a comparably coarse model grid of 16 km and various parameterizations, e.g., for basal sliding, iceberg calving, or for past variations in precipitation and ocean temperatures. In this study we evaluate the model's transient sensitivity to corresponding parameter choices and to different boundary conditions over the last two glacial cycles and provide estimates of involved uncertainties. We also discuss isolated and combined effects of climate and sea-level forcing. Hence, this study serves as a "cookbook" for the growing community of PISM users and paleo-ice sheet modelers in general. <br /> For each of the different model uncertainties with regard to climatic forcing, ice and Earth dynamics, and basal processes, we select one representative model parameter that captures relevant uncertainties and motivates corresponding parameter ranges that bound the observed ice volume at present. The four selected parameters are systematically varied in a parameter ensemble analysis, which is described in a companion paper.},
  language  = {en}
}
@article{AlbrichFrijiaParenteetal.2014,
  author    = {Albrich, Sergi and Frijia, Gianluca and Parente, Mariano and Caus, Esmeralda},
  title     = {The evolution of the earliest representatives of the genus Orbitoides: Implications for Upper Cretaceous biostratigraphy},
  series = {Cretaceous research},
  volume    = {51},
  journal   = {Cretaceous research},
  publisher = {Elsevier},
  address   = {London},
  issn      = {0195-6671},
  doi       = {10.1016/j.cretres.2014.04.013},
  pages     = {22 -- 34},
  year      = {2014},
  abstract  = {The biostratigraphy of Campanian-Maastrichtian carbonate platforms is largely based on the larger foraminiferal genus Orbitoides. However, while the taxonomy and the chronostratigraphic age of the younger species of this genus are well established, there are still many controversies on the earliest species. We have restudied their morphological characters using a large collection of samples from the type-localities and from continuous sections in the southern Pyrenees. Based on these new observations, the long forgotten species O. sanctae-pelagiae is reinstated, while O. dordoniensis is considered a junior synonym. Successive populations of O. hottingeri, O. sanctae-pelagiae and O. douvillei show gradual morphological changes in time marked by an increase in the size and complexity of the macrospheric embryonal apparatus, an increase of the size of the adult specimens of both generations and the progressive appearance and development of true lateral chamberlets. The Font de les Bagasses Unit in the southern Pyrenees preserves a high-resolution archive of the evolution of the earliest Orbitoides. Strontium isotope stratigraphy indicates that the oldest species, O. hottingeri, made its first appearance in the earliest Campanian, close to the Santonian-Campanian boundary, and was replaced by O. sanctae-pelagiae at a level closely corresponding to the boundary between the Placenticeras bidorsatum and Menabites delawarensis ammonite zones. (C) 2014 Elsevier Ltd. All rights reserved.},
  language  = {en}
}
@article{AliGiurcoArndtetal.2017,
  author    = {Ali, Saleem H. and Giurco, Damien and Arndt, Nicholas and Nickless, Edmund and Brown, Graham and Demetriades, Alecos and Durrheim, Ray and Enriquez, Maria Amelia and Kinnaird, Judith and Littleboy, Anna and Meinert, Lawrence D. and Oberh{\"a}nsli, Roland and Salem, Janet and Schodde, Richard and Schneider, Gabi and Vidal, Olivier and Yakovleva, Natalia},
  title     = {Mineral supply for sustainable development requires resource governance},
  series = {Nature : the international weekly journal of science},
  volume    = {543},
  journal   = {Nature : the international weekly journal of science},
  publisher = {Nature Publ. Group},
  address   = {London},
  issn      = {0028-0836},
  doi       = {10.1038/nature21359},
  pages     = {367 -- 372},
  year      = {2017},
  abstract  = {Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.},
  language  = {en}
}
@article{AlinaghiKruger2014,
  author    = {Alinaghi, Alireza and Kruger, Frank},
  title     = {Seismic array analysis and redetermination of depths of earthquakes in Tien-Shan: implications for strength of the crust and lithosphere},
  series = {Geophysical journal international},
  volume    = {198},
  journal   = {Geophysical journal international},
  number    = {2},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggu141},
  pages     = {1111 -- 1129},
  year      = {2014},
  abstract  = {We have redetermined focal depths of moderate and major earthquakes with reported lower-crust and upper-mantle depths that have occurred in Tien-Shan, since the availability of broad-band array data. Records of earthquakes at global arrays have been used for identification and modelling of depth phases in order to make accurate estimation of focal depths. Our results show that half of the purportedly deep earthquakes are indeed originating from depths attributable to middle-crust and lower-crust regions. Also one exceptional event in the northern foreland of Tien-Shan in Junggar Basin is located in the upper mantle at the depth of 64 km. Such unusually deep earthquakes for intraplate continental tectonic domain are all located at the margin of Tien-Shan with its adjacent stable blocks and at least some of them have occurred where the brittle behaviour of continental rocks is not highly expected. The reverse mechanisms of all these earthquakes and their proximity to formerly subducting and later colliding and underplating stable blocks and their interactions with overlying Tien-Shan are clues to explain this extremity.},
  language  = {en}
}
@phdthesis{Allroggen2015,
  author    = {Allroggen, Niklas},
  title     = {Observation of subsurface flow from the surface : applications of ground-penetrating radar},
  school      = {Universit{\"a}t Potsdam},
  pages     = {67},
  year      = {2015},
  language  = {en}
}
@article{AllroggenBeiterTronicke2020,
  author    = {Allroggen, Niklas and Beiter, Daniel and Tronicke, Jens},
  title     = {Ground-penetrating radar monitoring of fast subsurface processes},
  series = {Geophysics},
  volume    = {85},
  journal   = {Geophysics},
  number    = {3},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa},
  issn      = {0016-8033},
  doi       = {10.1190/GEO2019-0737.1},
  pages     = {A19 -- A23},
  year      = {2020},
  abstract  = {Earth and environmental sciences rely on detailed information about subsurface processes. Whereas geophysical techniques typically provide highly resolved spatial images, monitoring subsurface processes is often associated with enormous effort and, therefore, is usually limited to point information in time or space. Thus, the development of spatial and temporal continuous field monitoring methods is a major challenge for the understanding of subsurface processes. We have developed a novel method for ground-penetrating-radar (GPR) reflection monitoring of subsurface flow processes under unsaturated conditions and applied it to a hydrological infiltration experiment performed across a periglacial slope deposit in northwest Luxembourg. Our approach relies on a spatial and temporal quasicontinuous data recording and processing, followed by an attribute analysis based on analyzing differences between individual time steps. The results demonstrate the ability of time-lapse GPR monitoring to visualize the spatial and temporal dynamics of preferential flow processes with a spatial resolution in the order of a few decimeters and temporal resolution in the order of a few minutes. We observe excellent agreement with water table information originating from different boreholes. This demonstrates the potential of surface-based GPR reflection monitoring to observe the spatiotemporal dynamics of water movements in the subsurface. It provides valuable, and so far not accessible, information for example in the field of hydrology and pedology that allows studying the actual subsurface processes rather than deducing them from point information.},
  language  = {en}
}
@article{AllroggenHeinckeKoyanetal.2022,
  author    = {Allroggen, Niklas and Heincke, Bjorn H. and Koyan, Philipp and Wheeler, Walter and Ronning, Jan S.},
  title     = {3D ground-penetrating radar attribute classification},
  series = {Geophysics},
  volume    = {87},
  journal   = {Geophysics},
  number    = {4},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa},
  issn      = {0016-8033},
  doi       = {10.1190/GEO2021-0651.1},
  pages     = {WB19 -- WB30},
  year      = {2022},
  abstract  = {Ground-penetrating radar (GPR) is a method that can provide detailed information about the near subsurface in sedimentary and carbonate environments. The classical interpretation of GPR data (e.g., based on manual feature selection) often is labor-intensive and limited by the experience of the intercally used for seismic interpretation, can provide faster, more repeatable, and less biased interpretations. We have recorded a 3D GPD data set collected across a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard. After performing advanced processing, we compare the results of a classical GPR interpretation to the results of an attribute-based classification. Our attribute classification incorporates a selection of dip and textural attributes as the input for a k-means clustering approach. Similar to the results of the classical interpretation, the resulting classes differentiate between undisturbed strata and breccias or fault zones. The classes also reveal details inside the breccia pipe that are not discerned in the classical fer that the intrapipe GPR facies result from subtle differences, such as breccia lithology, clast size, or pore-space filling.},
  language  = {en}
}
@article{AllroggenBoothBakeretal.2019,
  author    = {Allroggen, Niklas Robin and Booth, Adam D. and Baker, Sandra E. and Ellwood, Stephen A. and Tronicke, Jens},
  title     = {High-resolution imaging and monitoring of animal tunnels using 3D ground-penetrating radar},
  series = {Near surface geophysics},
  volume    = {17},
  journal   = {Near surface geophysics},
  number    = {3},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1569-4445},
  doi       = {10.1002/nsg.12039},
  pages     = {291 -- 298},
  year      = {2019},
  abstract  = {Ground-penetrating radar is widely used to provide highly resolved images of subsurface sedimentary structures, with implications for processes active in the vadose zone. Frequently overlooked among these structures are tunnels excavated by fossorial animals (e.g., moles). We present two repeated ground-penetrating radar surveys performed a year apart in 2016 and 2017. Careful three-dimensional data processing reveals, in each data set, a pattern of elongated structures that are interpreted as a subsurface mole tunnel network. Our data demonstrate the ability of three-dimensional ground-penetrating radar imaging to non-invasively delineate the small animal tunnels (similar to 5 cm diameter) at a higher spatial and geolocation resolution than has previously been achieved. In turn, this makes repeated surveys and, therefore, long-term monitoring possible. Our results offer valuable insight into the understanding of the near-surface and showcase a potential new application for a geophysical method as well as a non-invasive method of ecological surveying.},
  language  = {en}
}
@article{AllroggenTronicke2016,
  author    = {Allroggen, Niklas and Tronicke, Jens},
  title     = {Attribute-based analysis of time-lapse ground-penetrating radar data},
  series = {Geophysics},
  volume    = {81},
  journal   = {Geophysics},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa},
  issn      = {0016-8033},
  doi       = {10.1190/GEO2015-0171.1},
  pages     = {H1 -- H8},
  year      = {2016},
  abstract  = {Analysis of time-lapse ground-penetrating radar (GPR) data can provide information regarding subsurface hydrological processes, such as preferential flow. However, the analysis of time-lapse data is often limited by data quality; for example, for noisy input data, the interpretation of difference images is often difficult. Motivated by modern image-processing tools, we have developed two robust GPR attributes, which allow us to distinguish amplitude (contrast similarity) and time-shift (structural similarity) variations related to differences between individual time-lapse GPR data sets. We tested and evaluated our attributes using synthetic data of different complexity. Afterward, we applied them to a field data example, in which subsurface flow was induced by an artificial rainfall event. For all examples, we identified our structural similarity attribute to be a robust measure for highlighting time-lapse changes also in data with low signal-to-noise ratios. We determined that our new attribute-based workflow is a promising tool to analyze time-lapse GPR data, especially for imaging subsurface hydrological processes.},
  language  = {en}
}
@article{AllroggenTronickeDelocketal.2015,
  author    = {Allroggen, Niklas and Tronicke, Jens and Delock, Marcel and B{\"o}niger, Urs},
  title     = {Topographic migration of 2D and 3D ground-penetrating radar data considering variable velocities},
  series = {Near surface geophysics},
  volume    = {13},
  journal   = {Near surface geophysics},
  number    = {3},
  publisher = {European Association of Geoscientists \& Engineers},
  address   = {Houten},
  issn      = {1569-4445},
  doi       = {10.3997/1873-0604.2014037},
  pages     = {4},
  year      = {2015},
  abstract  = {We present a 2D/3D topographic migration scheme for ground-penetrating radar (GPR) data which is able to account for variable velocities by using the root mean square (rms) velocity approximation. We test our migration scheme using a synthetic 2D example and compare our migrated image to the results obtained using common GPR migration approaches. Furthermore, we apply it to 2D and 3D field data. These examples are recorded across common subsurface settings including surface topography and variations in the GPR subsurface velocity field caused by a shallow ground water table. In such field settings, our migration strategy provides well focused images of commonoffset GPR data without the need for a detailed interval velocity model. The synthetic and field examples demonstrate that our topographic migration scheme allows for accurate GPR imaging in the presence of variations in surface topography and subsurface velocity.},
  language  = {en}
}
@article{AllroggenvanSchaikTronicke2015,
  author    = {Allroggen, Niklas and van Schaik, N. Loes M. B. and Tronicke, Jens},
  title     = {4D ground-penetrating radar during a plot scale dye tracer experiment},
  series = {Journal of applied geophysics},
  volume    = {118},
  journal   = {Journal of applied geophysics},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0926-9851},
  doi       = {10.1016/j.jappgeo.2015.04.016},
  pages     = {139 -- 144},
  year      = {2015},
  abstract  = {Flow phenomena in the unsaturated zone are highly variable in time and space. Thus, it is challenging to measure and monitor such processes under field conditions. Here, we present a new setup and interpretation approach for combining a dye tracer experiment with a 4D ground-penetrating radar (GPR) survey. Therefore, we designed a rainfall experiment during which we measured three surface-based 3D GPR surveys using a pair of 500 MHz antennas. Such a survey setup requires accurate acquisition and processing techniquesto extract time-lapse information supporting the interpretation of selected cross-sections photographed after excavating the site. Our results reveal patterns of traveltime changes in the measured GPR data, which are associated with soil moisture changes. As distinct horizons are present at our site, such changes can be quantified and transferred into changes in total soil moisture content. Our soil moisture estimates are similar to the amount of infiltrated water, which confirms our experimental approach and makes us confident for further developing this strategy, especially, with respect to improving the temporal and spatial resolution. (C) 2015 Elsevier B.V. All rights reserved.},
  language  = {en}
}
@article{AlonsoBookhagenCarrapaetal.2006,
  author    = {Alonso, Ricardo N. and Bookhagen, Bodo and Carrapa, Barbara and Coutand, Isabelle and Haschke, Michael and Hilley, George E. and Schoenbohm, Lindsay M. and Sobel, Edward and Strecker, Manfred and Trauth, Martin H. and Villanueva, Arturo},
  title     = {Tectonics, climate and landscape evolution of the Southern Central Andes : the Argentine Puna Plateau and adjacent regions between 22 and 30°S},
  isbn      = {978-3-540- 24329-8},
  year      = {2006},
  language  = {en}
}
@article{AlonzoBookhagenMcFaddenetal.2015,
  author    = {Alonzo, Michael and Bookhagen, Bodo and McFadden, Joseph P. and Sun, Alex and Roberts, Dar A.},
  title     = {Mapping urban forest leaf area index with airborne lidar using penetration metrics and allometry},
  series = {Remote sensing of environment : an interdisciplinary journal},
  volume    = {162},
  journal   = {Remote sensing of environment : an interdisciplinary journal},
  publisher = {Elsevier},
  address   = {New York},
  issn      = {0034-4257},
  doi       = {10.1016/j.rse.2015.02.025},
  pages     = {141 -- 153},
  year      = {2015},
  abstract  = {In urban areas, leaf area index (LAI) is a key ecosystem structural attribute with implications for energy and water balance, gas exchange, and anthropogenic energy use. In this study, we estimated LAI spatially using airborne lidar in downtown Santa Barbara, California, USA. We implemented two different modeling approaches. First, we directly estimated effective LAI (LAIe) using scan angle- and clump-corrected lidar laser penetration metrics (LPM). Second, we adapted existing allometric equations to estimate crown structural metrics including tree height and crown base height using lidar. The latter approach allowed for LAI estimates at the individual tree-crown scale. The LPM method, at both high and decimated point densities, resulted in good linear agreement with estimates from ground-based hemispherical photography (r(2) = 0.82, y = 0.99x) using a model that assumed a spherical leaf angle distribution. Within individual tree crown segments, the lidar estimates of crown structure closely paralleled field measurements (e.g., r(2) = 0.87 for crown length). LAI estimates based on the lidar crown measurements corresponded well with estimates from field measurements (r(2) = 0.84, y = 0.97x + 0.10). Consistency of the LPM and allometric lidar methods was also strong at 71 validation plots (r(2) = 0.88) and at 450 additional sample locations across the entire study area (r(2) = 0.72). This level of correspondence exceeded that of the canopy hemispherical photography and allometric, ground-based estimates (r(2) = 0.53). The first-order alignment of these two disparate methods may indicate that the error bounds for mapping LAI in cities are small enough to pursue large scale, spatially explicit estimation. (C) 2015 Elsevier Inc All rights reserved.},
  language  = {en}
}
@misc{AlsemgeestSchroederBoettgeretal.2016,
  author    = {Alsemgeest, Jitse and Schr{\"o}der, S. and Boettger, Ute and Pavlov, S. G. and Weber, I. and Greshake, A. and Kn{\"o}fler, H. -R. and Altenberger, Uwe and H{\"u}bers, H. -W.},
  title     = {COMBINED RAMAN-LIBS STUDIES ON IRON SULFIDES TO INVESTIGATE THE EFECTS OF THE LIBS PLASMA ON THE MINERAL COMPOSITION.},
  series = {Monthly notices of the Royal Astronomical Society},
  volume    = {51},
  journal   = {Monthly notices of the Royal Astronomical Society},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {1086-9379},
  pages     = {A147 -- A147},
  year      = {2016},
  language  = {en}
}
@article{AltenbachPflaumScheibeletal.1999,
  author    = {Altenbach, Alexander V. and Pflaum, U. and Scheibel, Thomas R. and Thies, A. and Timm, M. and Trauth, Martin H.},
  title     = {Scaling percentages of benthic forminifera with flux rates of organic carbon},
  year      = {1999},
  language  = {en}
}
@article{Altenberger1997,
  author    = {Altenberger, Uwe},
  title     = {Strain localization mechanisms in deep seated layered rocks},
  year      = {1997},
  language  = {en}
}
@article{Altenberger1996,
  author    = {Altenberger, Uwe},
  title     = {Material transport in channelized fluids-examples from hightemperature shear zones and its comparsion with minor deformed ares of the Mid-European Variscan belt},
  year      = {1996},
  language  = {en}
}
@article{Altenberger1996,
  author    = {Altenberger, Uwe},
  title     = {Fluid enhanced element redistribution, mass transport and volume changes in eclogite and amphibolite facies shear zones of different geological settings},
  year      = {1996},
  language  = {en}
}
@misc{Altenberger1992,
  author    = {Altenberger, Uwe},
  title     = {Stress-induced natural transformation of ortho- to clinohypersthene in metagabbros of the Ivrea Zone, Northern Italy},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-40778},
  year      = {1992},
  abstract  = {Orthopyroxenes of a high temperature protomylonite of the Ivrea Zone, Northern Italy show twin like polysynthetic lamellae parallel to {210} of the hypersthene host. The transformation is caused by plastic deformation under high metamorphic conditions which has resulted in dynamic recrystallization of pyroxene and plagioclase. The lamellae consist of clinohypersthene. The twin plane and the lamellar clino-orthoinversion of hypersthene due to natural deformation have not been described hitherto.},
  language  = {en}
}
@article{AltenbergerCisternaGuenteretal.2021,
  author    = {Altenberger, Uwe and Cisterna, Clara and G{\"u}nter, Christina and Guti{\´e}rrez, Adolfo Antonio and Rosales, J.},
  title     = {Tectono-metamorphic evolution of the proto-Andean margin of Gondwana},
  series = {Journal of South American earth sciences},
  volume    = {110},
  journal   = {Journal of South American earth sciences},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0895-9811},
  doi       = {10.1016/j.jsames.2021.103305},
  pages     = {23},
  year      = {2021},
  abstract  = {The present work gives a detailed analysis of the metamorphic and structural evolution of the back-arc portion of the Famatinian Orogen exposed in the southern Sierra de Aconquija (Cuesta de La Chilca segment) in the Sierras Pampeanas Orientales (Eastern Pampean Sierras). The Pampeanas Orientales include from north to south the Aconquija, Ambato and Ancasti mountains. They are mainly composed of middle to high grade metasedimentary units and magmatic rocks. At the south end of the Sierra de Aconquija, along an east to west segment extending over nearly 10 km (Cuesta de La Chilca), large volumes of metasedimentary rocks crop out. The eastern metasediments were defined as members of the El Portezuelo Metamorphic-Igneous Complex (EPMIC) or Eastern block and the western ones relate to the Quebrada del Molle Metamorphic Complex (QMMC) or Western block. The two blocks are divided by the La Chilca Shear Zone, which is reactivated as the Rio Chanarito fault. The EPMIC, forming the hanging wall, is composed of schists, gneisses and rare amphibolites, calc- silicate schists, marbles and migmatites. The rocks underwent multiple episodes of deformation and a late high strain-rate episode with gradually increasing mylonitization to the west. Metamorphism progrades from a M-1 phase to the peak M-3, characterized by the reactions: Qtz + Pl + Bt +/- Ms -> Grt + Bt(2) + Pl(2) +/- Sil +/- Kfs, Qtz + Bt + Sil -> Crd + Kfs and Qtz + Grt + Sil -> Crd. The M-3 assemblage is coeval with the dominant foliation related to a third deformational phase (D-3). The QMMC, forming the foot wall, is made up of fine-grained banded quartz - biotite schists with quartz veins and quartz-feldspar-rich pegmatites. To the east, schists are also overprinted by mylonitization. The M-3 peak assemblage is quartz + biotite + plagioclase +/- garnet +/- sillimanite +/- muscovite +/- ilmenite +/- magnetite +/- apatite. The studied segment suffered multiphase deformation and metamorphism. Some of these phases can be correlated between both blocks. D-1 is locally preserved in scarce outcrops in the EPMIC but is the dominant in the QMMC, where S-1 is nearly parallel to S-0. In the EPMIC, D-2 is represented by the S-2 foliation, related to the F-2 folding that overprints S-1, with dominant strike NNW - SSE and high angles dip to the E. D-3 in the EPMIC have F-3 folds with axis oblique to S-2; the S-3 foliation has striking NW - SE dipping steeply to the E or W and develops interference patterns. In the QMMC, S-2 (D-2) is a discontinuous cleavage oblique to S-1 and transposed by S-3 (D-3), subparallel to S-1. Such structures in the QMMC developed at subsolidus conditions and could be correlated to those of the EPMIC, which formed under higher P-T conditions. The penetrative deformation D-2 in the EPMIC occurred during a prograde path with syntectonic growth of garnet reaching P-T conditions of 640 degrees C and 0.54 GPa in the EPMIC. This stage was followed by a penetrative deformation D-3 with syn-kinematic growth of garnet, cordierite and plagioclase. Peak P-T conditions calculated for M-3 are 710 degrees C and 0.60 GPa, preserved in the western part of the EPMIC, west of the unnamed fault. The schists from the QMMC suffered the early low grade M-1 metamorphism with minimum PT conditions of ca 400 degrees C and 0.35 GPa, comparable to the fine schists (M-1) outcropping to the east. The D-2 deformation is associated with the prograde M-2 metamorphism. The penetrative D-3 stage is related to a medium grade metamorphism M-3, with peak conditions at ca 590 degrees C and 0.55 GPa. The superimposed stages of deformation and metamorphism reaching high P-T conditions followed by isothermal decompression, defining a clockwise orogenic P-T path. During the Lower Paleozoic, folds were superimposed and recrystallization as well as partial melting at peak conditions occurred. Similar characteristics were described from the basement from other Famatinian-dominated locations of the Sierra de Aconquija and other ranges of the Sierras Pampeanas Orientales.},
  language  = {en}
}
@article{AltenbergerKruhl1997,
  author    = {Altenberger, Uwe and Kruhl, J. H.},
  title     = {The long life of a thin and dry-temperature shear zone in the Hercynian lower crust of Calabria (s.Italy)},
  year      = {1997},
  language  = {en}
}
@article{AltenbergerMejiaJimenezGuenteretal.2012,
  author    = {Altenberger, Uwe and Mejia Jimenez, D. M. and G{\"u}nter, C. and Sierra Rodriguez, G. I. and Scheffler, F. and Oberh{\"a}nsli, Roland},
  title     = {The Garzn Massif, Colombia-a new ultrahigh-temperature metamorphic complex in the early Neoproterozoic of northern South America},
  series = {Mineralogy and petrology},
  volume    = {105},
  journal   = {Mineralogy and petrology},
  number    = {3-4},
  publisher = {Springer},
  address   = {Wien},
  issn      = {0930-0708},
  doi       = {10.1007/s00710-012-0202-1},
  pages     = {171 -- 185},
  year      = {2012},
  abstract  = {The Garzn Complex of the Garzn Massif in SW Colombia is composed of the Vergel Granulite Unit (VG) and the Las Margaritas Migmatite Unit (LMM). Previous studies reveal peak temperature conditions for the VG of about 740 A degrees C. The present study considers the remarkable exsolution phenomena in feldspars and pyroxenes and titanium-in-quartz thermometry. Recalculated ternary feldspar compositions indicate temperatures around 900-1,000 A degrees C just at or above the ultra-high temperature-metamorphism (UHTM) boundary of granulites. The calculated temperatures range of exsolved ortho- and clinopyroxenes also supports the existence of an UHTM event. In addition, titanium-in-quartz thermometry points towards ultra-high temperatures. It is the first known UHTM crustal segment in the northern part of South America. Although a mean geothermal gradient of ca 38 A degrees C km(-1) could imply additional heat supply in the lower crust controlling this extreme of peak metamorphism, an alternative model is suggested. The formation of the Vergel Granulite Unit is supposed to be formed in a continental back-arc environment with a thinned and weakened crust behind a magmatic arc (Guapotn-Mancagua Gneiss) followed by collision. In contrast, rocks of the adjacent Las Margaritas Migmatite Unit display "normal" granulite facies temperatures and are formed in a colder lower crust outside the arc, preserved by the Guapotn-Mancagu Gneiss. Back-arc formation was followed by inversion and thickening of the basin. The three units that form the modern-day Garzn Massif, were juxtaposed upon each other during collision (at ca. 1,000 Ma) and exhumation. The collision leading to the deformation of the studied area is part of the Grenville orogeny leading to the amalgamation of Rodinia.},
  language  = {en}
}
@article{AltenbergerOberhaensliSteinetal.2001,
  author    = {Altenberger, Uwe and Oberh{\"a}nsli, Roland and Stein, Eckehard and Moghni, Mohsen},
  title     = {Geochemistry, tectonic setting and geodynamic position of late orogenic dikes in the Melibocus Massiv, Bergstraesser Odenwald},
  year      = {2001},
  language  = {en}
}
@article{AltenbergerProsserGrandeetal.2013,
  author    = {Altenberger, Uwe and Prosser, Giacomo and Grande, Atonella and G{\"u}nter, Christina and Langone, Antonio},
  title     = {A seismogenic zone in the deep crust indicated by pseudotachylytes and ultramylonites in granulite-facies rocks of Calabria (Southern Italy)},
  series = {Contributions to mineralogy and petrology},
  volume    = {166},
  journal   = {Contributions to mineralogy and petrology},
  number    = {4},
  publisher = {Springer},
  address   = {New York},
  issn      = {0010-7999},
  doi       = {10.1007/s00410-013-0904-3},
  pages     = {975 -- 994},
  year      = {2013},
  abstract  = {Pseudotachylyte veins frequently associated with mylonites and ultramylonites occur within migmatitic paragneisses, metamonzodiorites, as well as felsic and mafic granulites at the base of the section of the Hercynian lower crust exposed in Calabria (Southern Italy). The crustal section is tectonically superposed on lower grade units. Ultramylonites and pseudotachylytes are particularly well developed in migmatitic paragneisses, whereas sparse fault-related pseudotachylytes and thin mylonite/ultramylonite bands occur in granulite-facies rocks. The presence of sillimanite and clinopyroxene in ultramylonites and mylonites indicates that relatively high-temperature conditions preceded the formation of pseudotachylytes. We have analysed pseudotachylytes from different rock types to ascertain their deep crustal origin and to better understand the relationships between brittle and ductile processes during deformation of the deeper crust. Different protoliths were selected to test how lithology controls pseudotachylyte composition and textures. In migmatites and felsic granulites, euhedral or cauliflower-shaped garnets directly crystallized from pseudotachylyte melts of near andesitic composition. This indicates that pseudotachylytes originated at deep crustal conditions (> 0.75 GPa). In mafic protoliths, quenched needle-to-feather-shaped high-alumina orthopyroxene occurs in contact with newly crystallized plagioclase. The pyroxene crystallizes in garnet-free and garnet-bearing veins. The simultaneous growth of orthopyroxene and plagioclase as well as almandine, suggests lower crustal origin, with pressures in excess of 0.85 GPa. The existence of melts of different composition in the same vein indicates the stepwise, non-equilibrium conditions of frictional melting. Melt formed and intruded into pre-existing anisotropies. In mafic granulites, brittle faulting is localized in a previously formed thin high-temperature mylonite bands. migmatitic gneisses are deformed into ultramylonite domains characterized by s-c fabric. Small grain size and fluids lowered the effective stress on the c planes favouring a seismic event and the consequent melt generation. Microstructures and ductile deformation of pseudotachylytes suggest continuous ductile flow punctuated by episodes of high-strain rate, leading to seismic events and melting.},
  language  = {en}
}
@article{AltenbergerWilhelm2000,
  author    = {Altenberger, Uwe and Wilhelm, Stefan},
  title     = {Ductile deformation of K-feldspar in eclogite facies shear zones in the Bergen Arcs, Norway : tectonophysics},
  year      = {2000},
  language  = {en}
}
@phdthesis{Ambili2012,
  author    = {Ambili, Anoop},
  title     = {Lake sediments as climate and tectonic archives in the Indian summer monsoon domain},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-64799},
  school      = {Universit{\"a}t Potsdam},
  year      = {2012},
  abstract  = {The Indian summer monsoon (ISM) is one of the largest climate systems on earth and impacts the livelihood of nearly 40\% of the world's population. Despite dedicated efforts, a comprehensive picture of monsoon variability has proved elusive largely due to the absence of long term high resolution records, spatial inhomogeneity of the monsoon precipitation, and the complex forcing mechanisms (solar insolation, internal teleconnections for e.g., El Ni{\~n}o-Southern Oscillation, tropical-midlatitude interactions). My work aims to improve the understanding of monsoon variability through generation of long term high resolution palaeoclimate data from climatically sensitive regions in the ISM and westerlies domain. To achieve this aim I have (i) identified proxies (sedimentological, geochemical, isotopic, and mineralogical) that are sensitive to environmental changes; (ii) used the identified proxies to generate long term palaeoclimate data from two climatically sensitive regions, one in NW Himalayas (transitional westerlies and ISM domain in the Spiti valley and one in the core monsoon zone (Lonar lake) in central India); (iii) undertaken a regional overview to generate "snapshots" of selected time slices; and (iv) interpreted the spatial precipitation anomalies in terms of those caused by modern teleconnections. This approach must be considered only as the first step towards identifying the past teleconnections as the boundary conditions in the past were significantly different from today and would have impacted the precipitation anomalies. As the Spiti valley is located in the in the active tectonic orogen of Himalayas, it was essential to understand the role of regional tectonics to make valid interpretations of catchment erosion and detrital influx into the lake. My approach of using integrated structural/morphometric and geomorphic signatures provided clear evidence for active tectonics in this area and demonstrated the suitability of these lacustrine sediments as palaleoseismic archives. The investigations on the lacustrine outcrops in Spiti valley also provided information on changes in seasonality of precipitation and occurrence of frequent and intense periods (ca. 6.8-6.1 cal ka BP) of detrital influx indicating extreme hydrological events in the past. Regional comparison for this time slice indicates a possible extended "break-monsoon like" mode for the monsoon that favors enhanced precipitation over the Tibetan plateau, Himalayas and their foothills. My studies on surface sediments from Lonar lake helped to identify environmentally sensitive proxies which could also be used to interpret palaeodata obtained from a ca. 10m long core raised from the lake in 2008. The core encompasses the entire Holocene and is the first well dated (by 14C) archive from the core monsoon zone of central India. My identification of authigenic evaporite gaylussite crystals within the core sediments provided evidence of exceptionally drier conditions during 4.7-3.9 and 2.0-0.5 cal ka BP. Additionally, isotopic investigations on these crystals provided information on eutrophication, stratification, and carbon cycling processes in the lake.},
  language  = {en}
}
@article{AminovDingMamadjonovetal.2017,
  author    = {Aminov, Jovid and Ding, Lin and Mamadjonov, Yunus and Dupont-Nivet, Guillaume and Aminov, Jamshed and Zhang, Li-Yun and Yoqubov, Shokirjon and Aminov, Javhar and Abdulov, Sherzod},
  title     = {Pamir Plateau formation and crustal thickening before the India-Asia collision inferred from dating and petrology of the 110-92 Ma Southern Pamir volcanic sequence},
  series = {Gondwana research : international geoscience journal ; official journal of the International Association for Gondwana Research},
  volume    = {51},
  journal   = {Gondwana research : international geoscience journal ; official journal of the International Association for Gondwana Research},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {1342-937X},
  doi       = {10.1016/j.gr.2017.08.003},
  pages     = {310 -- 326},
  year      = {2017},
  abstract  = {The formation of the Pamir is a key component of the India-Asia collision with major implications for lithospheric processes, plateau formation, land-sea configurations and associated climate changes. Although the formation of the Pamir is traditionally linked to Cenozoic processes associated with the India-Asia collision, the contribution of the Mesozoic tectonic evolution remains poorly understood. The Pamir was formed by the suturing of Gondwanan terranes to the south margin of Eurasia, however, the timing and tectonic mechanisms associated with this Mesozoic accretion remain poorly constrained. These processes are recorded by several igneous belts within these terranes, which are not well studied. Within the Southern Pamir, the Albian-Turonian volcanic rocks and comagmatic plutons of the Kyzylrabat Igneous Complex (KIC) provide an important and still unconstrained record of the Pamir evolution. Here we provide the age, origin and the geodynamic setting of the KIC volcanics by studying their petrology, zircon U-Pb geochronology, geochemistry and isotope composition.17 samples from the KIC volcanics yield U-Pb ages spanning from 92 to 110 Ma. The volcanics are intermediate to acidic in composition (SiO2 = 56-69 wt\%) and exhibit high-K calc-alkaline and shoshonitic affinity (K2O/Na2O = 12.2 wt\%). They show enrichment in LILE and LREE and depletion in HFSE and HREE with negative Ta, Ti and Nb anomalies, suggesting an arc-related tectonic setting for their formation. Low sNd(t) values (from 9.1 to 4.7), relatively high Sr-87/Sr-86(i) ratios (0.7069-0.7096) and broad range of zircon stif values (from 22.6 to 1.5) suggest a mixture of different magma sources. These features suggest that volcanics were derived by crustal under- or intraplating of an enriched subduction-related mantle shoshonitic magmas, by heating and partial melting of the lower crust, and by mixing of both magma components. Our results further imply that the KIC volcanics represent a shoshonitic suite typical of an evolution from active continental arc to post-collisional setting with a steepening of the Benioff zone and thickening of the crust toward the back-arc. This setting is best explained by the subduction- collision transition along the Shyok suture due to accretion of the Kohistan island arc to the Karakoram. This suggests that a significant part of the crustal shortening and thickening accommodated in the Pamir occurred in the Mesozoic before the India-Asia collision with implications for regional tectonic models. This further suggests the Pamir was already a major topographic feature with potentially important paleoclimate forcing such as the monsoonal circulation. (C) 2017 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved.},
  language  = {en}
}
@article{AmourMuttiChristetal.2013,
  author    = {Amour, Frederic and Mutti, Maria and Christ, Nicolas and Immenhauser, Adrian and Benson, Gregory S. and Agar, Susan M. and Tomas, Sara and Kabiri, Lahcen},
  title     = {Outcrop analog for an oolitic carbonate ramp reservoir a scale-dependent geologic modeling approach based on stratigraphic hierarchy},
  series = {AAPG bulletin},
  volume    = {97},
  journal   = {AAPG bulletin},
  number    = {5},
  publisher = {American Association of Petroleum Geologists},
  address   = {Tulsa},
  issn      = {0149-1423},
  doi       = {10.1306/10231212039},
  pages     = {845 -- 871},
  year      = {2013},
  abstract  = {Considerable effort has been devoted to the development of simulation algorithms for facies modeling, whereas a discussion of how to combine those techniques has not existed. The integration of multiple geologic data into a three-dimensional model, which requires the combination of simulation techniques, is yet a current challenge for reservoir modeling. This article presents a thought process that guides the acquisition and modeling of geologic data at various scales. Our work is based on outcrop data collected from a Jurassic carbonate ramp located in the High Atlas mountain range of Morocco. The study window is 1 km (0.6 mi) wide and 100 m (328.1 ft) thick. We describe and model the spatial and hierarchical arrangement of carbonate bodies spanning from largest to smallest: (1) stacking pattern of high-frequency depositional sequences, (2) facies association, and (3) lithofacies. Five sequence boundaries were modeled using differential global position system mapping and light detection and ranging data. The surface-based model shows a low-angle profile with modest paleotopographic relief at the inner-to-middle ramp transition. Facies associations were populated using truncated Gaussian simulation to preserve ordered trends between the inner, middle, and outer ramps. At the lithofacies scale, field observations and statistical analysis show a mosaiclike distribution that was simulated using a fully stochastic approach with sequential indicator simulation. This study observes that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The selection and implementation of different techniques customized for each level of the stratigraphic hierarchy will provide the essential computing flexibility to model carbonate settings. This study demonstrates that a scale-dependent modeling approach should be a common procedure when building subsurface and outcrop models.},
  language  = {en}
}
@phdthesis{Amour2013,
  author    = {Amour, Fr{\´e}d{\´e}ric},
  title     = {3-D modeling of shallow-water carbonate systems : a scale-dependent approach based on quantitative outcrop studies},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-66621},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {The study of outcrop modeling is located at the interface between two fields of expertise, Sedimentology and Computing Geoscience, which respectively investigates and simulates geological heterogeneity observed in the sedimentary record. During the last past years, modeling tools and techniques were constantly improved. In parallel, the study of Phanerozoic carbonate deposits emphasized the common occurrence of a random facies distribution along single depositional domain. Although both fields of expertise are intrinsically linked during outcrop simulation, their respective advances have not been combined in literature to enhance carbonate modeling studies. The present study re-examines the modeling strategy adapted to the simulation of shallow-water carbonate systems, based on a close relationship between field sedimentology and modeling capabilities. In the present study, the evaluation of three commonly used algorithms Truncated Gaussian Simulation (TGSim), Sequential Indicator Simulation (SISim), and Indicator Kriging (IK), were performed for the first time using visual and quantitative comparisons on an ideally suited carbonate outcrop. The results show that the heterogeneity of carbonate rocks cannot be fully simulated using one single algorithm. The operating mode of each algorithm involves capabilities as well as drawbacks that are not capable to match all field observations carried out across the modeling area. Two end members in the spectrum of carbonate depositional settings, a low-angle Jurassic ramp (High Atlas, Morocco) and a Triassic isolated platform (Dolomites, Italy), were investigated to obtain a complete overview of the geological heterogeneity in shallow-water carbonate systems. Field sedimentology and statistical analysis performed on the type, morphology, distribution, and association of carbonate bodies and combined with palaeodepositional reconstructions, emphasize similar results. At the basin scale (x 1 km), facies association, composed of facies recording similar depositional conditions, displays linear and ordered transitions between depositional domains. Contrarily, at the bedding scale (x 0.1 km), individual lithofacies type shows a mosaic-like distribution consisting of an arrangement of spatially independent lithofacies bodies along the depositional profile. The increase of spatial disorder from the basin to bedding scale results from the influence of autocyclic factors on the transport and deposition of carbonate sediments. Scale-dependent types of carbonate heterogeneity are linked with the evaluation of algorithms in order to establish a modeling strategy that considers both the sedimentary characteristics of the outcrop and the modeling capabilities. A surface-based modeling approach was used to model depositional sequences. Facies associations were populated using TGSim to preserve ordered trends between depositional domains. At the lithofacies scale, a fully stochastic approach with SISim was applied to simulate a mosaic-like lithofacies distribution. This new workflow is designed to improve the simulation of carbonate rocks, based on the modeling of each scale of heterogeneity individually. Contrarily to simulation methods applied in literature, the present study considers that the use of one single simulation technique is unlikely to correctly model the natural patterns and variability of carbonate rocks. The implementation of different techniques customized for each level of the stratigraphic hierarchy provides the essential computing flexibility to model carbonate systems. Closer feedback between advances carried out in the field of Sedimentology and Computing Geoscience should be promoted during future outcrop simulations for the enhancement of 3-D geological models.},
  language  = {en}
}
@article{AndermannCraveGloaguenetal.2012,
  author    = {Andermann, Christoff and Crave, Alain and Gloaguen, Richard and Davy, Philippe and Bonnet, Stephane},
  title     = {Connecting source and transport: Suspended sediments in the Nepal Himalayas},
  series = {Earth \& planetary science letters},
  volume    = {351},
  journal   = {Earth \& planetary science letters},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0012-821X},
  doi       = {10.1016/j.epsl.2012.06.059},
  pages     = {158 -- 170},
  year      = {2012},
  abstract  = {Understanding the dynamics of sediment fluxes is a key issue to constrain modern erosion rates in mountain belts and determine the still debated level of control exerted by precipitation, topography and tectonics. The well defined monsoon seasonality in the Himalayas, together with active tectonics and strong relief provide an ideal environment to assess these possible interactions. For this purpose, we present a new compilation of daily suspended sediment data for 12 stations of the major rivers of the Nepal Himalayas. We analyze the relationships of sediment transport with daily river discharge and precipitation data as well as with morphometric parameters. We show that suspended sediment concentrations vary systematically through the seasons and asynchronously to river discharge displaying a hysteresis effect. This clockwise hysteresis effect disappears when suspended sediment fluxes are directly compared with direct storm discharge. Therefore we attribute the hysteresis effect to groundwater dilution rather than a sediment supply limitation. We infer a rating model to calculate erosion rates directly from long river discharge chronicles. We show that, when normalized by drainage area and mean sediment flux, all rivers exhibit the same trend. This similarity implies that all river basins have the same erosion behavior, independent of location, size and catchment characteristics. Erosion rates calculated from suspended sediment fluxes range between 0.1 and 2.8 mm/yr. The erosion rates of the three main basins of Nepal are in the range 0.9-1.5 mm/yr. Erosion rates in the Higher Himalayas are relatively low ( <0.5 mm/yr, except for Kali Gandaki), while in the Lesser Himalayas they range from 0.2 to 2 mm/yr. We propose that material transport in the rivers depends on hillslope sediment supply, which is, in turn, controlled by those rainfalls producing direct runoff. In other words, the rivers in the Nepal Himalayas are supply-limited and the hillsopes as a contributing source are transport-limited. We also show that erosion processes are not as much controlled by infrequently occurring extreme precipitation events, than by moderate ones with a high recurrence interval.},
  language  = {en}
}
@article{AndersenEgholmKnudsenetal.2015,
  author    = {Andersen, Jane Lund and Egholm, D. L. and Knudsen, M. F. and Jansen, John D. and Nielsen, S. B.},
  title     = {The periglacial engine of mountain erosion - Part 1: Rates of frost cracking and frost creep},
  series = {Earth surface dynamics},
  volume    = {3},
  journal   = {Earth surface dynamics},
  number    = {4},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {2196-6311},
  doi       = {10.5194/esurf-3-447-2015},
  pages     = {447 -- 462},
  year      = {2015},
  abstract  = {With accelerating climate cooling in the late Cenozoic, glacial and periglacial erosion became more widespread on the surface of the Earth. The resultant shift in erosion patterns significantly changed the large-scale morphology of many mountain ranges worldwide. Whereas the glacial fingerprint is easily distinguished by its characteristic fjords and U-shaped valleys, the periglacial fingerprint is more subtle but potentially prevails in some mid- to high-latitude landscapes. Previous models have advocated a frost-driven control on debris production at steep headwalls and glacial valley sides. Here we investigate the important role that periglacial processes also play in less steep parts of mountain landscapes. Understanding the influences of frost-driven processes in low-relief areas requires a focus on the consequences of an accreting soil mantle, which characterises such surfaces. We present a new model that quantifies two key physical processes: frost cracking and frost creep, as a function of both temperature and sediment thickness. Our results yield new insights into how climate and sediment transport properties combine to scale the intensity of periglacial processes. The thickness of the soil mantle strongly modulates the relation between climate and the intensity of mechanical weathering and sediment flux. Our results also point to an offset between the conditions that promote frost cracking and those that promote frost creep, indicating that a stable climate can provide optimal conditions for only one of those processes at a time. Finally, quantifying these relations also opens up the possibility of including periglacial processes in large-scale, long-term landscape evolution models, as demonstrated in a companion paper.},
  language  = {en}
}
@phdthesis{Angelopoulos2020,
  author    = {Angelopoulos, Michael},
  title     = {Mechanisms of sub-aquatic permafrost evolution in Arctic coastal environments},
  school      = {Universit{\"a}t Potsdam},
  pages     = {165},
  year      = {2020},
  abstract  = {Subsea permafrost is perennially cryotic earth material that lies offshore. Most submarine permafrost is relict terrestrial permafrost beneath the Arctic shelf seas, was inundated after the last glaciation, and has been warming and thawing ever since. It is a reservoir and confining layer for gas hydrates and has the potential to release greenhouse gases and affect global climate change. Furthermore, subsea permafrost thaw destabilizes coastal infrastructure. While numerous studies focus on its distribution and rate of thaw over glacial timescales, these studies have not been brought together and examined in their entirety to assess rates of thaw beneath the Arctic Ocean. In addition, there is still a large gap in our understanding of sub-aquatic permafrost processes on finer spatial and temporal scales. The degradation rate of subsea permafrost is influenced by the initial conditions upon submergence. Terrestrial permafrost that has already undergone warming, partial thawing or loss of ground ice may react differently to inundation by seawater compared to previously undisturbed ice-rich permafrost. Heat conduction models are sufficient to model the thaw of thick subsea permafrost from the bottom, but few studies have included salt diffusion for top-down chemical degradation in shallow waters characterized by mean annual cryotic conditions on the seabed. Simulating salt transport is critical for assessing degradation rates for recently inundated permafrost, which may accelerate in response to warming shelf waters, a lengthening open water season, and faster coastal erosion rates. In the nearshore zone, degradation rates are also controlled by seasonal processes like bedfast ice, brine injection, seasonal freezing under floating ice conditions and warm freshwater discharge from large rivers. The interplay of all these variables is complex and needs further research. To fill this knowledge gap, this thesis investigates sub-aquatic permafrost along the southern coast of the Bykovsky Peninsula in eastern Siberia. Sediment cores and ground temperature profiles were collected at a freshwater thermokarst lake and two thermokarst lagoons in 2017. At this site, the coastline is retreating, and seawater is inundating various types of permafrost: sections of ice-rich Pleistocene permafrost (Yedoma) cliffs at the coastline alternate with lagoons and lower elevation previously thawed and refrozen permafrost basins (Alases). Electrical resistivity surveys with floating electrodes were carried out to map ice-bearing permafrost and taliks (unfrozen zones in the permafrost, usually formed beneath lakes) along the diverse coastline and in the lagoons. Combined with the borehole data, the electrical resistivity results permit estimation of contemporary ice-bearing permafrost characteristics, distribution, and occasionally, thickness. To conceptualize possible geomorphological and marine evolutionary pathways to the formation of the observed layering, numerical models were applied. The developed model incorporates salt diffusion and seasonal dynamics at the seabed, including bedfast ice. Even along coastlines with mean annual non-cryotic boundary conditions like the Bykovsky Peninsula, the modelling results show that salt diffusion minimizes seasonal freezing of the seabed, leading to faster degradation rates compared to models without salt diffusion. Seasonal processes are also important for thermokarst lake to lagoon transitions because lagoons can generate cold hypersaline conditions underneath the ice cover. My research suggests that ice-bearing permafrost can form in a coastal lagoon environment, even under floating ice. Alas basins, however, may degrade more than twice as fast as Yedoma permafrost in the first several decades of inundation. In addition to a lower ice content compared to Yedoma permafrost, Alas basins may be pre-conditioned with salt from adjacent lagoons. Considering the widespread distribution of thermokarst in the Arctic, its integration into geophysical models and offshore surveys is important to quantify and understand subsea permafrost degradation and aggradation. Through numerical modelling, fieldwork, and a circum-Arctic review of subsea permafrost literature, this thesis provides new insights into sub-aquatic permafrost evolution in saline coastal environments.},
  language  = {en}
}
@article{AngelopoulosOverduinWestermannetal.2020,
  author    = {Angelopoulos, Michael and Overduin, Pier Paul and Westermann, Sebastian and Tronicke, Jens and Strauss, Jens and Schirrmeister, Lutz and Biskaborn, Boris and Liebner, Susanne and Maksimov, Georgii and Grigoriev, Mikhail N. and Grosse, Guido},
  title     = {Thermokarst lake to lagoon transitions in Eastern Siberia},
  series = {Journal of geophysical research : Earth surface},
  volume    = {125},
  journal   = {Journal of geophysical research : Earth surface},
  number    = {10},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {2169-9003},
  doi       = {10.1029/2019JF005424},
  pages     = {21},
  year      = {2020},
  abstract  = {As the Arctic coast erodes, it drains thermokarst lakes, transforming them into lagoons, and, eventually, integrates them into subsea permafrost. Lagoons represent the first stage of a thermokarst lake transition to a marine setting and possibly more saline and colder upper boundary conditions. In this research, borehole data, electrical resistivity surveying, and modeling of heat and salt diffusion were carried out at Polar Fox Lagoon on the Bykovsky Peninsula, Siberia. Polar Fox Lagoon is a seasonally isolated water body connected to Tiksi Bay through a channel, leading to hypersaline waters under the ice cover. The boreholes in the center of the lagoon revealed floating ice and a saline cryotic bed underlain by a saline cryotic talik, a thin ice-bearing permafrost layer, and unfrozen ground. The bathymetry showed that most of the lagoon had bedfast ice in spring. In bedfast ice areas, the electrical resistivity profiles suggested that an unfrozen saline layer was underlain by a thick layer of refrozen talik. The modeling showed that thermokarst lake taliks can refreeze when submerged in saltwater with mean annual bottom water temperatures below or slightly above 0 degrees C. This occurs, because the top-down chemical degradation of newly formed ice-bearing permafrost is slower than the refreezing of the talik. Hence, lagoons may precondition taliks with a layer of ice-bearing permafrost before encroachment by the sea, and this frozen layer may act as a cap on gas migration out of the underlying talik.},
  language  = {en}
}
@article{AngelopoulosWestermannOverduinetal.2019,
  author    = {Angelopoulos, Michael and Westermann, Sebastian and Overduin, Pier Paul and Faguet, Alexey and Olenchenko, Vladimir and Grosse, Guido and Grigoriev, Mikhail N.},
  title     = {Heat and salt flow in subsea permafrost modeled with CryoGRID2},
  series = {Journal of geophysical research : Earth surface},
  volume    = {124},
  journal   = {Journal of geophysical research : Earth surface},
  number    = {4},
  publisher = {American Geophysical Union},
  address   = {Hoboken},
  issn      = {2169-9003},
  doi       = {10.1029/2018JF004823},
  pages     = {920 -- 937},
  year      = {2019},
  abstract  = {Thawing of subsea permafrost can impact offshore infrastructure, affect coastal erosion, and release permafrost organic matter. Thawing is usually modeled as the result of heat transfer, although salt diffusion may play an important role in marine settings. To better quantify nearshore subsea permafrost thawing, we applied the CryoGRID2 heat diffusion model and coupled it to a salt diffusion model. We simulated coastline retreat and subsea permafrost evolution as it develops through successive stages of a thawing sequence at the Bykovsky Peninsula, Siberia. Sensitivity analyses for seawater salinity were performed to compare the results for the Bykovsky Peninsula with those of typical Arctic seawater. For the Bykovsky Peninsula, the modeled ice-bearing permafrost table (IBPT) for ice-rich sand and an erosion rate of 0.25m/year was 16.7 m below the seabed 350m offshore. The model outputs were compared to the IBPT depth estimated from coastline retreat and electrical resistivity surveys perpendicular to and crossing the shoreline of the Bykovsky Peninsula. The interpreted geoelectric data suggest that the IBPT dipped to 15-20m below the seabed at 350m offshore. Both results suggest that cold saline water forms beneath grounded ice and floating sea ice in shallow water, causing cryotic benthic temperatures. The freezing point depression produced by salt diffusion can delay or prevent ice formation in the sediment and enhance the IBPT degradation rate. Therefore, salt diffusion may facilitate the release of greenhouse gasses to the atmosphere and considerably affect the design of offshore and coastal infrastructure in subsea permafrost areas.},
  language  = {en}
}
@phdthesis{Angermann2018,
  author    = {Angermann, Lisa},
  title     = {Hillslope-stream connectivity across scales},
  doi       = {10.25932/publishup-42454},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-424542},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xix, 193},
  year      = {2018},
  abstract  = {The concept of hydrologic connectivity summarizes all flow processes that link separate regions of a landscape. As such, it is a central theme in the field of catchment hydrology, with influence on neighboring disciplines such as ecology and geomorphology. It is widely acknowledged to be an important key in understanding the response behavior of a catchment and has at the same time inspired research on internal processes over a broad range of scales. From this process-hydrological point of view, hydrological connectivity is the conceptual framework to link local observations across space and scales. This is the context in which the four studies this thesis comprises of were conducted. The focus was on structures and their spatial organization as important control on preferential subsurface flow. Each experiment covered a part of the conceptualized flow path from hillslopes to the stream: soil profile, hillslope, riparian zone, and stream. For each study site, the most characteristic structures of the investigated domain and scale, such as slope deposits and peat layers were identified based on preliminary or previous investigations or literature reviews. Additionally, further structural data was collected and topographical analyses were carried out. Flow processes were observed either based on response observations (soil moisture changes or discharge patterns) or direct measurement (advective heat transport). Based on these data, the flow-relevance of the characteristic structures was evaluated, especially with regard to hillslope to stream connectivity. Results of the four studies revealed a clear relationship between characteristic spatial structures and the hydrological behavior of the catchment. Especially the spatial distribution of structures throughout the study domain and their interconnectedness were crucial for the establishment of preferential flow paths and their relevance for large-scale processes. Plot and hillslope-scale irrigation experiments showed that the macropores of a heterogeneous, skeletal soil enabled preferential flow paths at the scale of centimeters through the otherwise unsaturated soil. These flow paths connected throughout the soil column and across the hillslope and facilitated substantial amounts of vertical and lateral flow through periglacial slope deposits. In the riparian zone of the same headwater catchment, the connectivity between hillslopes and stream was controlled by topography and the dualism between characteristic subsurface structures and the geomorphological heterogeneity of the stream channel. At the small scale (1 m to 10 m) highest gains always occurred at steps along the longitudinal streambed profile, which also controlled discharge patterns at the large scale (100 m) during base flow conditions (number of steps per section). During medium and high flow conditions, however, the impact of topography and parafluvial flow through riparian zone structures prevailed and dominated the large-scale response patterns. In the streambed of a lowland river, low permeability peat layers affected the connectivity between surface water and groundwater, but also between surface water and the hyporheic zone. The crucial factor was not the permeability of the streambed itself, but rather the spatial arrangement of flow-impeding peat layers, causing increased vertical flow through narrow "windows" in contrast to predominantly lateral flow in extended areas of high hydraulic conductivity sediments. These results show that the spatial organization of structures was an important control for hydrological processes at all scales and study areas. In a final step, the observations from different scales and catchment elements were put in relation and compared. The main focus was on the theoretical analysis of the scale hierarchies of structures and processes and the direction of causal dependencies in this context. Based on the resulting hierarchical structure, a conceptual framework was developed which is capable of representing the system's complexity while allowing for adequate simplifications. The resulting concept of the parabolic scale series is based on the insight that flow processes in the terrestrial part of the catchment (soil and hillslopes) converge. This means that small-scale processes assemble and form large-scale processes and responses. Processes in the riparian zone and the streambed, however, are not well represented by the idea of convergence. Here, the large-scale catchment signal arrives and is modified by structures in the riparian zone, stream morphology, and the small-scale interactions between surface water and groundwater. Flow paths diverge and processes can better be represented by proceeding from large scales to smaller ones. The catchment-scale representation of processes and structures is thus the conceptual link between terrestrial hillslope processes and processes in the riparian corridor.},
  language  = {en}
}
@article{AngermannJackischAllroggenetal.2017,
  author    = {Angermann, Lisa and Jackisch, Conrad and Allroggen, Niklas and Sprenger, Matthias and Zehe, Erwin and Tronicke, Jens and Weiler, Markus and Blume, Theresa},
  title     = {Form and function in hillslope hydrology: characterization of subsurface flow based on response observations},
  series = {Hydrology and earth system sciences : HESS},
  volume    = {21},
  journal   = {Hydrology and earth system sciences : HESS},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1027-5606},
  doi       = {10.5194/hess-21-3727-2017},
  pages     = {3727 -- 3748},
  year      = {2017},
  abstract  = {The phrase form and function was established in architecture and biology and refers to the idea that form and functionality are closely correlated, influence each other, and co-evolve. We suggest transferring this idea to hydrological systems to separate and analyze their two main characteristics: their form, which is equivalent to the spatial structure and static properties, and their function, equivalent to internal responses and hydrological behavior. While this approach is not particularly new to hydrological field research, we want to employ this concept to explicitly pursue the question of what information is most advantageous to understand a hydrological system. We applied this concept to subsurface flow within a hillslope, with a methodological focus on function: we conducted observations during a natural storm event and followed this with a hillslope-scale irrigation experiment. The results are used to infer hydrological processes of the monitored system. Based on these findings, the explanatory power and conclusiveness of the data are discussed. The measurements included basic hydrological monitoring methods, like piezometers, soil moisture, and discharge measurements. These were accompanied by isotope sampling and a novel application of 2-D time-lapse GPR (ground-penetrating radar). The main finding regarding the processes in the hillslope was that preferential flow paths were established quickly, despite unsaturated conditions. These flow paths also caused a detectable signal in the catchment response following a natural rainfall event, showing that these processes are relevant also at the catchment scale. Thus, we conclude that response observations (dynamics and patterns, i.e., indicators of function) were well suited to describing processes at the observational scale. Especially the use of 2-D time-lapse GPR measurements, providing detailed subsurface response patterns, as well as the combination of stream-centered and hillslope-centered approaches, allowed us to link processes and put them in a larger context. Transfer to other scales beyond observational scale and generalizations, however, rely on the knowledge of structures (form) and remain speculative. The complementary approach with a methodological focus on form (i.e., structure exploration) is presented and discussed in the companion paper by Jackisch et al. (2017).},
  language  = {en}
}
@phdthesis{Anis2013,
  author    = {Anis, Muhammad Rehan},
  title     = {Climate change effects on overland flow},
  address   = {Potsdam},
  pages     = {127 S.},
  year      = {2013},
  language  = {en}
}