@phdthesis{Guiducci2013,
  author    = {Guiducci, Lorenzo},
  title     = {Passive biomimetic actuators : the role of material architecture},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70446},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Passive plant actuators have fascinated many researchers in the field of botany and structural biology since at least one century. Up to date, the most investigated tissue types in plant and artificial passive actuators are fibre-reinforced composites (and multilayered assemblies thereof) where stiff, almost inextensible cellulose microfibrils direct the otherwise isotropic swelling of a matrix. In addition, Nature provides examples of actuating systems based on lignified, low-swelling, cellular solids enclosing a high-swelling cellulosic phase. This is the case of the Delosperma nakurense seed capsule, in which a specialized tissue promotes the reversible opening of the capsule upon wetting. This tissue has a diamond-shaped honeycomb microstructure characterized by high geometrical anisotropy: when the cellulosic phase swells inside this constraining structure, the tissue deforms up to four times in one principal direction while maintaining its original dimension in the other. Inspired by the example of the Delosoperma nakurense, in this thesis we analyze the role of architecture of 2D cellular solids as models for natural hygromorphs. To start off, we consider a simple fluid pressure acting in the cells and try to assess the influence of several architectural parameters onto their mechanical actuation. Since internal pressurization is a configurational type of load (that is the load direction is not fixed but it "follows" the structure as it deforms) it will result in the cellular structure acquiring a "spontaneous" shape. This shape is independent of the load but just depends on the architectural characteristics of the cells making up the structure itself. Whereas regular convex tiled cellular solids (such as hexagonal, triangular or square lattices) deform isotropically upon pressurization, we show through finite element simulations that by introducing anisotropic and non-convex, reentrant tiling large expansions can be achieved in each individual cell. The influence of geometrical anisotropy onto the expansion behaviour of a diamond shaped honeycomb is assessed by FEM calculations and a Born lattice approximation. We found that anisotropic expansions (eigenstrains) comparable to those observed in the keels tissue of the Delosoperma nakurense are possible. In particular these depend on the relative contributions of bending and stretching of the beams building up the honeycomb. Moreover, by varying the walls' Young modulus E and internal pressure p we found that both the eigenstrains and 2D elastic moduli scale with the ratio p/E. Therefore the potential of these pressurized structures as soft actuators is outlined. This approach was extended by considering several 2D cellular solids based on two types of non-convex cells. Each honeycomb is build as a lattice made of only one non-convex cell. Compared to usual honeycombs, these lattices have kinked walls between neighbouring cells which offers a hidden length scale allowing large directed deformations. By comparing the area expansion in all lattices, we were able to show that less convex cells are prone to achieve larger area expansions, but the direction in which the material expands is variable and depends on the local cell's connectivity. This has repercussions both at the macroscopic (lattice level) and microscopic (cells level) scales. At the macroscopic scale, these non-convex lattices can experience large anisotropic (similarly to the diamond shaped honeycomb) or perfectly isotropic principal expansions, large shearing deformations or a mixed behaviour. Moreover, lattices that at the macroscopic scale expand similarly can show quite different microscopic deformation patterns that include zig-zag motions and radical changes of the initial cell shape. Depending on the lattice architecture, the microscopic deformations of the individual cells can be equal or not, so that they can build up or mutually compensate and hence give rise to the aforementioned variety of macroscopic behaviours. Interestingly, simple geometrical arguments involving the undeformed cell shape and its local connectivity enable to predict the results of the FE simulations. Motivated by the results of the simulations, we also created experimental 3D printed models of such actuating structures. When swollen, the models undergo substantial deformation with deformation patterns qualitatively following those predicted by the simulations. This work highlights how the internal architecture of a swellable cellular solid can lead to complex shape changes which may be useful in the fields of soft robotics or morphing structures.},
  language  = {en}
}
@phdthesis{Herenz2014,
  author    = {Herenz, Peter},
  title     = {A study of the absorption characteristics of gaseous galaxy halos in the local Universe},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70513},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Today, it is well known that galaxies like the Milky Way consist not only of stars but also of gas and dust. The galactic halo, a sphere of gas that surrounds the stellar disk of a galaxy, is especially interesting. It provides a wealth of information about in and outflowing gaseous material towards and away from galaxies and their hierarchical evolution. For the Milky Way, the so-called high-velocity clouds (HVCs), fast moving neutral gas complexes in the halo that can be traced by absorption-line measurements, are believed to play a crucial role in the overall matter cycle in our Galaxy. Over the last decades, the properties of these halo structures and their connection to the local circumgalactic and intergalactic medium (CGM and IGM, respectively) have been investigated in great detail by many different groups. So far it remains unclear, however, to what extent the results of these studies can be transferred to other galaxies in the local Universe. In this thesis, we study the absorption properties of Galactic HVCs and compare the HVC absorption characteristics with those of intervening QSO absorption-line systems at low redshift. The goal of this project is to improve our understanding of the spatial extent and physical conditions of gaseous galaxy halos in the local Universe. In the first part of the thesis we use HST /STIS ultraviolet spectra of more than 40 extragalactic background sources to statistically analyze the absorption properties of the HVCs in the Galactic halo. We determine fundamental absorption line parameters including covering fractions of different weakly/intermediately/highly ionized metals with a particular focus on SiII and MgII. Due to the similarity in the ionization properties of SiII and MgII, we are able to estimate the contribution of HVC-like halo structures to the cross section of intervening strong MgII absorbers at z = 0. Our study implies that only the most massive HVCs would be regarded as strong MgII absorbers, if the Milky Way halo would be seen as a QSO absorption line system from an exterior vantage point. Combining the observed absorption-cross section of Galactic HVCs with the well-known number density of intervening strong MgII absorbers at z = 0, we conclude that the contribution of infalling gas clouds (i.e., HVC analogs) in the halos of Milky Way-type galaxies to the cross section of strong MgII absorbers is 34\%. This result indicates that only about one third of the strong MgII absorption can be associated with HVC analogs around other galaxies, while the majority of the strong MgII systems possibly is related to galaxy outflows and winds. The second part of this thesis focuses on the properties of intervening metal absorbers at low redshift. The analysis of the frequency and physical conditions of intervening metal systems in QSO spectra and their relation to nearby galaxies offers new insights into the typical conditions of gaseous galaxy halos. One major aspect in our study was to regard intervening metal systems as possible HVC analogs. We perform a detailed analysis of absorption line properties and line statistics for 57 metal absorbers along 78 QSO sightlines using newly-obtained ultraviolet spectra obtained with HST /COS. We find clear evidence for bimodal distribution in the HI column density in the absorbers, a trend that we interpret as sign for two different classes of absorption systems (with HVC analogs at the high-column density end). With the help of the strong transitions of SiII λ1260, SiIII λ1206, and CIII λ977 we have set up Cloudy photoionization models to estimate the local ionization conditions, gas densities, and metallicities. We find that the intervening absorption systems studied by us have, on average, similar physical conditions as Galactic HVC absorbers, providing evidence that many of them represent HVC analogs in the vicinity of other galaxies. We therefore determine typical halo sizes for SiII, SiIII, and CIII for L = 0.01L∗ and L = 0.05L∗ galaxies. Based on the covering fractions of the different ions in the Galactic halo, we find that, for example, the typical halo size for SiIII is ∼ 160 kpc for L = 0.05L∗ galaxies. We test the plausibility of this result by searching for known galaxies close to the QSO sightlines and at similar redshifts as the absorbers. We find that more than 34\% of the measured SiIII absorbers have galaxies associated with them, with the majority of the absorbers indeed being at impact parameters ρ ≤160 kpc.},
  language  = {en}
}
@phdthesis{Inal2013,
  author    = {Inal, Sahika},
  title     = {Responsive polymers for optical sensing applications},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70806},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {LCST-type synthetic thermoresponsive polymers can reversibly respond to certain stimuli in aqueous media with a massive change of their physical state. When fluorophores, that are sensitive to such changes, are incorporated into the polymeric structure, the response can be translated into a fluorescence signal. Based on this idea, this thesis presents sensing schemes which transduce the stimuli-induced variations in the solubility of polymer chains with covalently-bound fluorophores into a well-detectable fluorescence output. Benefiting from the principles of different photophysical phenomena, i.e. of fluorescence resonance energy transfer and solvatochromism, such fluorescent copolymers enabled monitoring of stimuli such as the solution temperature and ionic strength, but also of association/disassociation mechanisms with other macromolecules or of biochemical binding events through remarkable changes in their fluorescence properties. For instance, an aqueous ratiometric dual sensor for temperature and salts was developed, relying on the delicate supramolecular assembly of a thermoresponsive copolymer with a thiophene-based conjugated polyelectrolyte. Alternatively, by taking advantage of the sensitivity of solvatochromic fluorophores, an increase in solution temperature or the presence of analytes was signaled as an enhancement of the fluorescence intensity. A simultaneous use of the sensitivity of chains towards the temperature and a specific antibody allowed monitoring of more complex phenomena such as competitive binding of analytes. The use of different thermoresponsive polymers, namely poly(N-isopropylacrylamide) and poly(meth)acrylates bearing oligo(ethylene glycol) side chains, revealed that the responsive polymers differed widely in their ability to perform a particular sensing function. In order to address questions regarding the impact of the chemical structure of the host polymer on the sensing performance, the macromolecular assembly behavior below and above the phase transition temperature was evaluated by a combination of fluorescence and light scattering methods. It was found that although the temperature-triggered changes in the macroscopic absorption characteristics were similar for these polymers, properties such as the degree of hydration or the extent of interchain aggregations differed substantially. Therefore, in addition to the demonstration of strategies for fluorescence-based sensing with thermoresponsive polymers, this work highlights the role of the chemical structure of the two popular thermoresponsive polymers on the fluorescence response. The results are fundamentally important for the rational choice of polymeric materials for a specific sensing strategy.},
  language  = {en}
}
@phdthesis{Ott2006,
  author    = {Ott, Christian David},
  title     = {Stellar iron core collapse in {3+1} general relativity and the gravitational wave signature of core-collapse supernovae},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12986},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {I perform and analyse the first ever calculations of rotating stellar iron core collapse in {3+1} general relativity that start out with presupernova models from stellar evolutionary calculations and include a microphysical finite-temperature nuclear equation of state, an approximate scheme for electron capture during collapse and neutrino pressure effects. Based on the results of these calculations, I obtain the to-date most realistic estimates for the gravitational wave signal from collapse, bounce and the early postbounce phase of core collapse supernovae. I supplement my {3+1} GR hydrodynamic simulations with 2D Newtonian neutrino radiation-hydrodynamic supernova calculations focussing on (1) the late postbounce gravitational wave emission owing to convective overturn, anisotropic neutrino emission and protoneutron star pulsations, and (2) on the gravitational wave signature of accretion-induced collapse of white dwarfs to neutron stars.},
  language  = {en}
}
@phdthesis{Prevot2006,
  author    = {Prevot, Michelle Elizabeth},
  title     = {Introduction of a thermo-sensitive non-polar species into polyelectrolyte multilayer capsules for drug delivery},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7785},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {The layer-by-layer assembly (LBL) of polyelectrolytes has been extensively studied for the preparation of ultrathin films due to the versatility of the build-up process. The control of the permeability of these layers is particularly important as there are potential drug delivery applications. Multilayered polyelectrolyte microcapsules are also of great interest due to their possible use as microcontainers. This work will present two methods that can be used as employable drug delivery systems, both of which can encapsulate an active molecule and tune the release properties of the active species. Poly-(N-isopropyl acrylamide), (PNIPAM) is known to be a thermo-sensitive polymer that has a Lower Critical Solution Temperature (LCST) around 32oC; above this temperature PNIPAM is insoluble in water and collapses. It is also known that with the addition of salt, the LCST decreases. This work shows Differential Scanning Calorimetry (DSC) and Confocal Laser Scanning Microscopy (CLSM) evidence that the LCST of the PNIPAM can be tuned with salt type and concentration. Microcapsules were used to encapsulate this thermo-sensitive polymer, resulting in a reversible and tunable stimuli- responsive system. The encapsulation of the PNIPAM inside of the capsule was proven with Raman spectroscopy, DSC (bulk LCST measurements), AFM (thickness change), SEM (morphology change) and CLSM (in situ LCST measurement inside of the capsules). The exploitation of the capsules as a microcontainer is advantageous not only because of the protection the capsules give to the active molecules, but also because it facilitates easier transport. The second system investigated demonstrates the ability to reduce the permeability of polyelectrolyte multilayer films by the addition of charged wax particles. The incorporation of this hydrophobic coating leads to a reduced water sensitivity particularly after heating, which melts the wax, forming a barrier layer. This conclusion was proven with Neutron Reflectivity by showing the decreased presence of D2O in planar polyelectrolyte films after annealing creating a barrier layer. The permeability of capsules could also be decreased by the addition of a wax layer. This was proved by the increase in recovery time measured by Florescence Recovery After Photobleaching, (FRAP) measurements. In general two advanced methods, potentially suitable for drug delivery systems, have been proposed. In both cases, if biocompatible elements are used to fabricate the capsule wall, these systems provide a stable method of encapsulating active molecules. Stable encapsulation coupled with the ability to tune the wall thickness gives the ability to control the release profile of the molecule of interest.},
  subject      = {Mikrokapsel},
  language  = {en}
}
@phdthesis{Schick2013,
  author    = {Schick, Daniel},
  title     = {Ultrafast lattice dynamics in photoexcited nanostructures : femtosecond X-ray diffraction with optimized evaluation schemes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68827},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Within the course of this thesis, I have investigated the complex interplay between electron and lattice dynamics in nanostructures of perovskite oxides. Femtosecond hard X-ray pulses were utilized to probe the evolution of atomic rearrangement directly, which is driven by ultrafast optical excitation of electrons. The physics of complex materials with a large number of degrees of freedom can be interpreted once the exact fingerprint of ultrafast lattice dynamics in time-resolved X-ray diffraction experiments for a simple model system is well known. The motion of atoms in a crystal can be probed directly and in real-time by femtosecond pulses of hard X-ray radiation in a pump-probe scheme. In order to provide such ultrashort X-ray pulses, I have built up a laser-driven plasma X-ray source. The setup was extended by a stable goniometer, a two-dimensional X-ray detector and a cryogen-free cryostat. The data acquisition routines of the diffractometer for these ultrafast X-ray diffraction experiments were further improved in terms of signal-to-noise ratio and angular resolution. The implementation of a high-speed reciprocal-space mapping technique allowed for a two-dimensional structural analysis with femtosecond temporal resolution. I have studied the ultrafast lattice dynamics, namely the excitation and propagation of coherent phonons, in photoexcited thin films and superlattice structures of the metallic perovskite SrRuO3. Due to the quasi-instantaneous coupling of the lattice to the optically excited electrons in this material a spatially and temporally well-defined thermal stress profile is generated in SrRuO3. This enables understanding the effect of the resulting coherent lattice dynamics in time-resolved X-ray diffraction data in great detail, e.g. the appearance of a transient Bragg peak splitting in both thin films and superlattice structures of SrRuO3. In addition, a comprehensive simulation toolbox to calculate the ultrafast lattice dynamics and the resulting X-ray diffraction response in photoexcited one-dimensional crystalline structures was developed in this thesis work. With the powerful experimental and theoretical framework at hand, I have studied the excitation and propagation of coherent phonons in more complex material systems. In particular, I have revealed strongly localized charge carriers after above-bandgap femtosecond photoexcitation of the prototypical multiferroic BiFeO3, which are the origin of a quasi-instantaneous and spatially inhomogeneous stress that drives coherent phonons in a thin film of the multiferroic. In a structurally imperfect thin film of the ferroelectric Pb(Zr0.2Ti0.8)O3, the ultrafast reciprocal-space mapping technique was applied to follow a purely strain-induced change of mosaicity on a picosecond time scale. These results point to a strong coupling of in- and out-of-plane atomic motion exclusively mediated by structural defects.},
  language  = {en}
}
@phdthesis{Yadavalli2014,
  author    = {Yadavalli, Nataraja Sekhar},
  title     = {Advances in experimental methods to probe surface relief grating formation mechanism in photosensitive materials},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71213},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {When azobenzene-modified photosensitive polymer films are irradiated with light interference patterns, topographic variations in the film develop that follow the electric field vector distribution resulting in the formation of surface relief grating (SRG). The exact correspondence of the electric field vector orientation in interference pattern in relation to the presence of local topographic minima or maxima of SRG is in general difficult to determine. In my thesis, we have established a systematic procedure to accomplish the correlation between different interference patterns and the topography of SRG. For this, we devise a new setup combining an atomic force microscope and a two-beam interferometer (IIAFM). With this set-up, it is possible to track the topography change in-situ, while at the same time changing polarization and phase of the impinging interference pattern. To validate our results, we have compared two photosensitive materials named in short as PAZO and trimer. This is the first time that an absolute correspondence between the local distribution of electric field vectors of interference pattern and the local topography of the relief grating could be established exhaustively. In addition, using our IIAFM we found that for a certain polarization combination of two orthogonally polarized interfering beams namely SP (↕, ↔) interference pattern, the topography forms SRG with only half the period of the interference patterns. Exploiting this phenomenon we are able to fabricate surface relief structures below diffraction limit with characteristic features measuring only 140 nm, by using far field optics with a wavelength of 491 nm. We have also probed for the stresses induced during the polymer mass transport by placing an ultra-thin gold film on top (5-30 nm). During irradiation, the metal film not only deforms along with the SRG formation, but ruptures in regular and complex manner. The morphology of the cracks differs strongly depending on the electric field distribution in the interference pattern even when the magnitude and the kinetic of the strain are kept constant. This implies a complex local distribution of the opto-mechanical stress along the topography grating. The neutron reflectivity measurements of the metal/polymer interface indicate the penetration of metal layer within the polymer resulting in the formation of bonding layer that confirms the transduction of light induced stresses in the polymer layer to a metal film.},
  language  = {en}
}