@article{AbramovaBatzelModesti2022, author = {Abramova, Olga and Batzel, Katharina and Modesti, Daniela}, title = {Collective response to the health crisis among German Twitter users}, series = {International Journal of Information Management Data Insights}, volume = {2}, journal = {International Journal of Information Management Data Insights}, number = {2}, publisher = {Elsevier}, address = {Amsterdam}, issn = {2667-0968}, doi = {10.1016/j.jjimei.2022.100126}, pages = {13}, year = {2022}, abstract = {We used structural topic modeling to analyze over 800,000 German tweets about COVID-19 to answer the questions: What patterns emerge in tweets as a response to a health crisis? And how do topics discussed change over time? The study leans on the goals associated with the health information seeking (GAINS) model, discerning whether a post aims at tackling and eliminating the problem (i.e., problem-focused) or managing the emotions (i.e., emotion-focused); whether it strives to maximize positive outcomes (promotion focus) or to minimize negative outcomes (prevention focus). The findings indicate four clusters salient in public reactions: 1) "Understanding" (problem-promotion); 2) "Action planning" (problem-prevention); 3) "Hope" (emotion-promotion) and 4) "Reassurance" (emotion-prevention). Public communication is volatile over time, and a shift is evidenced from self-centered to community-centered topics within 4.5 weeks. Our study illustrates social media text mining's potential to quickly and efficiently extract public opinions and reactions. Monitoring fears and trending topics enable policymakers to rapidly respond to deviant behavior, like resistive attitudes toward containment measures or deteriorating physical health. Healthcare workers can use the insights to provide mental health services for battling anxiety or extensive loneliness from staying home.}, language = {en} } @article{AliHomannKhaliletal.2013, author = {Ali, Mostafa and Homann, Thomas and Khalil, Mahmoud and Kruse, Hans-Peter and Rawel, Harshadrai Manilal}, title = {Milk whey protein modification by coffee-specific phenolics effect on structural and functional properties}, series = {Journal of agricultural and food chemistry : a publication of the American Chemical Society}, volume = {61}, journal = {Journal of agricultural and food chemistry : a publication of the American Chemical Society}, number = {28}, publisher = {American Chemical Society}, address = {Washington}, issn = {0021-8561}, doi = {10.1021/jf402221m}, pages = {6911 -- 6920}, year = {2013}, abstract = {A suitable vehicle for integration of bioactive plant constituents is proposed. It involves modification of proteins using phenolics and applying these for protection of labile constituents. It dissects the noncovalent and covalent interactions of beta-lactoglobulin with coffee-specific phenolics. Alkaline and polyphenol oxidase modulated covalent reactions were compared. Tryptic digestion combined with MALDI-TOF-MS provided tentative allocation of the modification type and site in the protein, and an in silico modeling of modified beta-lactoglobulin is proposed. The modification delivers proteins with enhanced antioxidative properties. Changed structural properties and differences in solubility, surface hydrophobicity, and emulsification were observed. The polyphenol oxidase modulated reaction provides a modified beta-lactoglobulin with a high antioxidative power, is thermally more stable, requires less energy to unfold, and, when emulsified with lutein esters, exhibits their higher stability against UV light. Thus, adaptation of this modification provides an innovative approach for functionalizing proteins and their uses in the food industry.}, language = {en} } @article{AliHomannKreiseletal.2012, author = {Ali, Mostafa and Homann, Thomas and Kreisel, Janka and Khalil, Mahmoud and Puhlmann, Ralf and Kruse, Hans-Peter and Rawel, Harshadrai Manilal}, title = {Characterization and modeling of the interactions between coffee storage proteins and phenolic compounds}, series = {Journal of agricultural and food chemistry : a publication of the American Chemical Society}, volume = {60}, journal = {Journal of agricultural and food chemistry : a publication of the American Chemical Society}, number = {46}, publisher = {American Chemical Society}, address = {Washington}, issn = {0021-8561}, doi = {10.1021/jf303372a}, pages = {11601 -- 11608}, year = {2012}, abstract = {This study addresses the interactions of coffee storage proteins with coffee-specific phenolic compounds. Protein profiles, of Coffea arabica and Coffea canephora (var robusta) were compared. Major Phenolic compounds were extracted and analyzed with appropriate methods. The polyphenol-protein interactions during protein extraction have been addressed by different analytical setups [reversed-phase high-performance liquid chromatography (RP-HPLC), sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS), and Trolox equivalent antioxidant capacity (TEAC) assays], with focus directed toward identification of covalent adduct formation. The results indicate that C. arabica proteins are more susceptible to these interactions and the polyphenol oxidase activity seems to be a crucial factor for the formation of these addition products. A tentative allocation of the modification type and site in the protein has been attempted. Thus, the first available in silico modeling of modified coffee proteins is reported. The extent of these modifications may contribute to the structure and function of "coffee melanoidins" and are discussed in the context of coffee flavor formation.}, language = {en} } @article{ArvidssonPerezRodriguezMuellerRoeber2011, author = {Arvidsson, Samuel Janne and Perez-Rodriguez, Paulino and M{\"u}ller-R{\"o}ber, Bernd}, title = {A growth phenotyping pipeline for Arabidopsis thaliana integrating image analysis and rosette area modeling for robust quantification of genotype effects}, series = {New phytologist : international journal of plant science}, volume = {191}, journal = {New phytologist : international journal of plant science}, number = {3}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0028-646X}, doi = {10.1111/j.1469-8137.2011.03756.x}, pages = {895 -- 907}, year = {2011}, abstract = {To gain a deeper understanding of the mechanisms behind biomass accumulation, it is important to study plant growth behavior. Manually phenotyping large sets of plants requires important human resources and expertise and is typically not feasible for detection of weak growth phenotypes. Here, we established an automated growth phenotyping pipeline for Arabidopsis thaliana to aid researchers in comparing growth behaviors of different genotypes. The analysis pipeline includes automated image analysis of two-dimensional digital plant images and evaluation of manually annotated information of growth stages. It employs linear mixed-effects models to quantify genotype effects on total rosette area and relative leaf growth rate (RLGR) and ANOVAs to quantify effects on developmental times. Using the system, a single researcher can phenotype up to 7000 plants d(-1). Technical variance is very low (typically < 2\%). We show quantitative results for the growth-impaired starch-excessmutant sex4-3 and the growth-enhancedmutant grf9. We show that recordings of environmental and developmental variables reduce noise levels in the phenotyping datasets significantly and that careful examination of predictor variables (such as d after sowing or germination) is crucial to avoid exaggerations of recorded phenotypes and thus biased conclusions.}, language = {en} } @article{Ayzel2021, author = {Ayzel, Georgy}, title = {Deep neural networks in hydrology}, series = {Vestnik of Saint Petersburg University. Earth Sciences}, volume = {66}, journal = {Vestnik of Saint Petersburg University. Earth Sciences}, number = {1}, publisher = {Univ. Press}, address = {St. Petersburg}, issn = {2541-9668}, doi = {10.21638/spbu07.2021.101}, pages = {5 -- 18}, year = {2021}, abstract = {For around a decade, deep learning - the sub-field of machine learning that refers to artificial neural networks comprised of many computational layers - modifies the landscape of statistical model development in many research areas, such as image classification, machine translation, and speech recognition. Geoscientific disciplines in general and the field of hydrology in particular, also do not stand aside from this movement. Recently, the proliferation of modern deep learning-based techniques and methods has been actively gaining popularity for solving a wide range of hydrological problems: modeling and forecasting of river runoff, hydrological model parameters regionalization, assessment of available water resources. identification of the main drivers of the recent change in water balance components. This growing popularity of deep neural networks is primarily due to their high universality and efficiency. The presented qualities, together with the rapidly growing amount of accumulated environmental information, as well as increasing availability of computing facilities and resources, allow us to speak about deep neural networks as a new generation of mathematical models designed to, if not to replace existing solutions, but significantly enrich the field of geophysical processes modeling. This paper provides a brief overview of the current state of the field of development and application of deep neural networks in hydrology. Also in the following study, the qualitative long-term forecast regarding the development of deep learning technology for managing the corresponding hydrological modeling challenges is provided based on the use of "Gartner Hype Curve", which in the general details describes a life cycle of modern technologies.}, language = {en} } @article{AyzelIzhitskiy2019, author = {Ayzel, Georgy and Izhitskiy, Alexander}, title = {Climate Change Impact Assessment on Freshwater Inflow into the Small Aral Sea}, series = {Water}, volume = {11}, journal = {Water}, number = {11}, publisher = {MDPI}, address = {Basel}, issn = {2073-4441}, doi = {10.3390/w11112377}, pages = {19}, year = {2019}, abstract = {During the last few decades, the rapid separation of the Small Aral Sea from the isolated basin has changed its hydrological and ecological conditions tremendously. In the present study, we developed and validated the hybrid model for the Syr Darya River basin based on a combination of state-of-the-art hydrological and machine learning models. Climate change impact on freshwater inflow into the Small Aral Sea for the projection period 2007-2099 has been quantified based on the developed hybrid model and bias corrected and downscaled meteorological projections simulated by four General Circulation Models (GCM) for each of three Representative Concentration Pathway scenarios (RCP). The developed hybrid model reliably simulates freshwater inflow for the historical period with a Nash-Sutcliffe efficiency of 0.72 and a Kling-Gupta efficiency of 0.77. Results of the climate change impact assessment showed that the freshwater inflow projections produced by different GCMs are misleading by providing contradictory results for the projection period. However, we identified that the relative runoff changes are expected to be more pronounced in the case of more aggressive RCP scenarios. The simulated projections of freshwater inflow provide a basis for further assessment of climate change impacts on hydrological and ecological conditions of the Small Aral Sea in the 21st Century.}, language = {en} } @article{BarthelmeTrukenbrodEngbertetal.2013, author = {Barthelme, Simon and Trukenbrod, Hans Arne and Engbert, Ralf and Wichmann, Felix A.}, title = {Modeling fixation locations using spatial point processes}, series = {Journal of vision}, volume = {13}, journal = {Journal of vision}, number = {12}, publisher = {Association for Research in Vision and Opthalmology}, address = {Rockville}, issn = {1534-7362}, doi = {10.1167/13.12.1}, pages = {34}, year = {2013}, abstract = {Whenever eye movements are measured, a central part of the analysis has to do with where subjects fixate and why they fixated where they fixated. To a first approximation, a set of fixations can be viewed as a set of points in space; this implies that fixations are spatial data and that the analysis of fixation locations can be beneficially thought of as a spatial statistics problem. We argue that thinking of fixation locations as arising from point processes is a very fruitful framework for eye-movement data, helping turn qualitative questions into quantitative ones. We provide a tutorial introduction to some of the main ideas of the field of spatial statistics, focusing especially on spatial Poisson processes. We show how point processes help relate image properties to fixation locations. In particular we show how point processes naturally express the idea that image features' predictability for fixations may vary from one image to another. We review other methods of analysis used in the literature, show how they relate to point process theory, and argue that thinking in terms of point processes substantially extends the range of analyses that can be performed and clarify their interpretation.}, language = {en} } @article{EngbertTrukenbrodBarthelmeetal.2015, author = {Engbert, Ralf and Trukenbrod, Hans Arne and Barthelme, Simon and Wichmann, Felix A.}, title = {Spatial statistics and attentional dynamics in scene viewing}, series = {Journal of vision}, volume = {15}, journal = {Journal of vision}, number = {1}, publisher = {Association for Research in Vision and Opthalmology}, address = {Rockville}, issn = {1534-7362}, doi = {10.1167/15.1.14}, pages = {17}, year = {2015}, abstract = {In humans and in foveated animals visual acuity is highly concentrated at the center of gaze, so that choosing where to look next is an important example of online, rapid decision-making. Computational neuroscientists have developed biologically-inspired models of visual attention, termed saliency maps, which successfully predict where people fixate on average. Using point process theory for spatial statistics, we show that scanpaths contain, however, important statistical structure, such as spatial clustering on top of distributions of gaze positions. Here, we develop a dynamical model of saccadic selection that accurately predicts the distribution of gaze positions as well as spatial clustering along individual scanpaths. Our model relies on activation dynamics via spatially-limited (foveated) access to saliency information, and, second, a leaky memory process controlling the re-inspection of target regions. This theoretical framework models a form of context-dependent decision-making, linking neural dynamics of attention to behavioral gaze data.}, language = {en} } @article{EsfahaniGholamiOhrnberger2020, author = {Esfahani, Reza Dokht Dolatabadi and Gholami, Ali and Ohrnberger, Matthias}, title = {An inexact augmented Lagrangian method for nonlinear dispersion-curve inversion using Dix-type global linear approximation}, series = {Geophysics : a journal of general and applied geophysics}, volume = {85}, journal = {Geophysics : a journal of general and applied geophysics}, number = {3}, publisher = {GeoScienceWorld}, address = {Tulsa, Okla.}, issn = {0016-8033}, doi = {10.1190/geo2019-0717.1}, pages = {EN77 -- EN85}, year = {2020}, abstract = {Dispersion-curve inversion of Rayleigh waves to infer subsurface shear-wave velocity is a long-standing problem in seismology. Due to nonlinearity and ill-posedness, sophisticated regularization techniques are required to solve the problem for a stable velocity model. We have formulated the problem as a minimization problem with nonlinear operator constraint and then solve it by using an inexact augmented Lagrangian method, taking advantage of the Haney-Tsai Dix-type relation (a global linear approximation of the nonlinear forward operator). This replaces the original regularized nonlinear problem with iterative minimization of a more tractable regularized linear problem followed by a nonlinear update of the phase velocity (data) in which the update can be performed accurately with any forward modeling engine, for example, the finite-element method. The algorithm allows discretizing the medium with thin layers (for the finite-element method) and thus omitting the layer thicknesses from the unknowns and also allows incorporating arbitrary regularizations to shape the desired velocity model. In this research, we use total variation regularization to retrieve the shear-wave velocity model. We use two synthetic and two real data examples to illustrate the performance of the inversion algorithm with total variation regularization. We find that the method is fast and stable, and it converges to the solution of the original nonlinear problem.}, language = {en} } @article{FranckeBaroniBrosinskyetal.2018, author = {Francke, Till and Baroni, Gabriele and Brosinsky, Arlena and Foerster, Saskia and Lopez-Tarazon, Jos{\´e} Andr{\´e}s and Sommerer, Erik and Bronstert, Axel}, title = {What Did Really Improve Our Mesoscale Hydrological Model?}, series = {Water resources research}, volume = {54}, journal = {Water resources research}, number = {11}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0043-1397}, doi = {10.1029/2018WR022813}, pages = {8594 -- 8612}, year = {2018}, abstract = {Modelers can improve a model by addressing the causes for the model errors (data errors and structural errors). This leads to implementing model enhancements (MEs), for example, meteorological data based on more monitoring stations, improved calibration data, and/or modifications in process formulations. However, deciding on which MEs to implement remains a matter of expert knowledge. After implementing multiple MEs, any improvement in model performance is not easily attributed, especially when considering different objectives or aspects of this improvement (e.g., better dynamics vs. reduced bias). We present an approach for comparing the effect of multiple MEs based on real observations and considering multiple objectives (MMEMO). A stepwise selection approach and structured plots help to address the multidimensionality of the problem. Tailored analyses allow a differentiated view on the effect of MEs and their interactions. MMEMO is applied to a case study employing the mesoscale hydro-sedimentological model WASA-SED for the Mediterranean-mountainous Isabena catchment, northeast Spain. The investigated seven MEs show diverse effects: some MEs (e.g., rainfall data) cause improvements for most objectives, while other MEs (e.g., land use data) only affect a few objectives or even decrease model performance. Interaction of MEs was observed for roughly half of the MEs, confirming the need to address them in the analysis. Calibration and increasing the temporal resolution showed by far stronger impact than any of the other MEs. The proposed framework can be adopted in other studies to analyze the effect of MEs and, thus, facilitate the identification and implementation of the most promising MEs for comparable cases.}, language = {en} } @incollection{HaaseThimBender2022, author = {Haase, Jennifer and Thim, Christof and Bender, Benedict}, title = {Expanding modeling notations}, series = {Business process management workshops}, volume = {436}, booktitle = {Business process management workshops}, editor = {Marrella, Andrea and Weber, Barbara}, publisher = {Springer}, address = {Cham}, isbn = {978-3-030-94342-4}, doi = {10.1007/978-3-030-94343-1_15}, pages = {197 -- 208}, year = {2022}, abstract = {Creativity is a common aspect of business processes and thus needs a proper representation through process modeling notations. However, creative processes constitute highly flexible process elements, as new and unforeseeable outcome is developed. This presents a challenge for modeling languages. Current methods representing creative-intensive work are rather less able to capture creative specifics which are relevant to successfully run and manage these processes. We outline the concept of creative-intensive processes and present an example from a game design process in order to derive critical process aspects relevant for its modeling. Six aspects are detected, with first and foremost: process flexibility, as well as temporal uncertainty, experience, types of creative problems, phases of the creative process and individual criteria. By first analyzing what aspects of creative work modeling notations already cover, we further discuss which modeling extensions need to be developed to better represent creativity within business processes. We argue that a proper representation of creative work would not just improve the management of those processes, but can further enable process actors to more efficiently run these creative processes and adjust them to better fit to the creative needs.}, language = {en} } @article{HeckenbachBruneGlerumetal.2021, author = {Heckenbach, Esther Lina and Brune, Sascha and Glerum, Anne C. and Bott, Judith}, title = {Is there a speed limit for the thermal steady-state assumption in continental rifts?}, series = {Geochemistry, geophysics, geosystems : G 3 ; an electronic journal of the earth sciences}, volume = {22}, journal = {Geochemistry, geophysics, geosystems : G 3 ; an electronic journal of the earth sciences}, number = {3}, publisher = {Wiley}, address = {Hoboken, NJ}, issn = {1525-2027}, doi = {10.1029/2020GC009577}, pages = {18}, year = {2021}, abstract = {The lithosphere is often assumed to reside in a thermal steady-state when quantitatively describing the temperature distribution in continental interiors and sedimentary basins, but also at active plate boundaries. Here, we investigate the applicability limit of this assumption at slowly deforming continental rifts. To this aim, we assess the tectonic thermal imprint in numerical experiments that cover a range of realistic rift configurations. For each model scenario, the deviation from thermal equilibrium is evaluated. This is done by comparing the transient temperature field of every model to a corresponding steady-state model with an identical structural configuration. We find that the validity of the thermal steady-state assumption strongly depends on rift type, divergence velocity, sampling location, and depth within the rift. Maximum differences between transient and steady-state models occur in narrow rifts, at the rift sides, and if the extension rate exceeds 0.5-2 mm/a. Wide rifts, however, reside close to thermal steady-state even for high extension velocities. The transient imprint of rifting appears to be overall negligible for shallow isotherms with a temperature less than 100 degrees C. Contrarily, a steady-state treatment of deep crustal isotherms leads to an underestimation of crustal temperatures, especially for narrow rift settings. Thus, not only relatively fast rifts like the Gulf of Corinth, Red Sea, and Main Ethiopian Rift, but even slow rifts like the Kenya Rift, Rhine Graben, and Rio Grande Rift must be expected to feature a pronounced transient component in the temperature field and to therefore violate the thermal steady-state assumption for deeper crustal isotherms.}, language = {en} } @article{HornBecherJohstetal.2020, author = {Horn, Juliane and Becher, Matthias A. and Johst, Karin and Kennedy, Peter J. and Osborne, Juliet L. and Radchuk, Viktoriia and Grimm, Volker}, title = {Honey bee colony performance affected by crop diversity and farmland structure}, series = {Ecological applications}, volume = {31}, journal = {Ecological applications}, number = {1}, publisher = {Wiley Periodicals LLC}, address = {Washington DC}, issn = {1939-5582}, doi = {10.1002/eap.2216}, pages = {1 -- 22}, year = {2020}, abstract = {Forage availability has been suggested as one driver of the observed decline in honey bees. However, little is known about the effects of its spatiotemporal variation on colony success. We present a modeling framework for assessing honey bee colony viability in cropping systems. Based on two real farmland structures, we developed a landscape generator to design cropping systems varying in crop species identity, diversity, and relative abundance. The landscape scenarios generated were evaluated using the existing honey bee colony model BEEHAVE, which links foraging to in-hive dynamics. We thereby explored how different cropping systems determine spatiotemporal forage availability and, in turn, honey bee colony viability (e.g., time to extinction, TTE) and resilience (indicated by, e.g., brood mortality). To assess overall colony viability, we developed metrics,P(H)andP(P,)which quantified how much nectar and pollen provided by a cropping system per year was converted into a colony's adult worker population. Both crop species identity and diversity determined the temporal continuity in nectar and pollen supply and thus colony viability. Overall farmland structure and relative crop abundance were less important, but details mattered. For monocultures and for four-crop species systems composed of cereals, oilseed rape, maize, and sunflower,P(H)andP(P)were below the viability threshold. Such cropping systems showed frequent, badly timed, and prolonged forage gaps leading to detrimental cascading effects on life stages and in-hive work force, which critically reduced colony resilience. Four-crop systems composed of rye-grass-dandelion pasture, trefoil-grass pasture, sunflower, and phacelia ensured continuous nectar and pollen supply resulting in TTE > 5 yr, andP(H)(269.5 kg) andP(P)(108 kg) being above viability thresholds for 5 yr. Overall, trefoil-grass pasture, oilseed rape, buckwheat, and phacelia improved the temporal continuity in forage supply and colony's viability. Our results are hypothetical as they are obtained from simplified landscape settings, but they nevertheless match empirical observations, in particular the viability threshold. Our framework can be used to assess the effects of cropping systems on honey bee viability and to develop land-use strategies that help maintain pollination services by avoiding prolonged and badly timed forage gaps.}, language = {en} } @article{HuberRiglingBebietal.2013, author = {Huber, Robert and Rigling, Andreas and Bebi, Peter and Brand, Fridolin Simon and Briner, Simon and Buttler, Alexandre and Elkin, Che and Gillet, Francois and Gret-Regamey, Adrienne and Hirschi, Christian and Lischke, Heike and Scholz, Roland Werner and Seidl, Roman and Spiegelberger, Thomas and Walz, Ariane and Zimmermann, Willi and Bugmann, Harald}, title = {Sustainable land use in Mountain Regions under global change synthesis across scales and disciplines}, series = {Ecology and society : a journal of integrative science for resilience and sustainability}, volume = {18}, journal = {Ecology and society : a journal of integrative science for resilience and sustainability}, number = {3}, publisher = {Resilience Alliance}, address = {Wolfville}, issn = {1708-3087}, doi = {10.5751/ES-05499-180336}, pages = {20}, year = {2013}, abstract = {Mountain regions provide essential ecosystem goods and services (EGS) for both mountain dwellers and people living outside these areas. Global change endangers the capacity of mountain ecosystems to provide key services. The Mountland project focused on three case study regions in the Swiss Alps and aimed to propose land-use practices and alternative policy solutions to ensure the provision of key EGS under climate and land-use changes. We summarized and synthesized the results of the project and provide insights into the ecological, socioeconomic, and political processes relevant for analyzing global change impacts on a European mountain region. In Mountland, an integrative approach was applied, combining methods from economics and the political and natural sciences to analyze ecosystem functioning from a holistic human-environment system perspective. In general, surveys, experiments, and model results revealed that climate and socioeconomic changes are likely to increase the vulnerability of the EGS analyzed. We regard the following key characteristics of coupled human-environment systems as central to our case study areas in mountain regions: thresholds, heterogeneity, trade-offs, and feedback. Our results suggest that the institutional framework should be strengthened in a way that better addresses these characteristics, allowing for (1) more integrative approaches, (2) a more network-oriented management and steering of political processes that integrate local stakeholders, and (3) enhanced capacity building to decrease the identified vulnerability as central elements in the policy process. Further, to maintain and support the future provision of EGS in mountain regions, policy making should also focus on project-oriented, cross-sectoral policies and spatial planning as a coordination instrument for land use in general.}, language = {en} } @article{MohrMangaWald2018, author = {Mohr, Christian Heinrich and Manga, Michael and Wald, David}, title = {Stronger peak ground motion, beyond the threshold to initiate a response, does not lead to larger stream discharge responses to earthquakes}, series = {Geophysical research letters}, volume = {45}, journal = {Geophysical research letters}, number = {13}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2018GL078621}, pages = {6523 -- 6531}, year = {2018}, abstract = {The impressive number of stream gauges in Chile, combined with a suite of past and recent large earthquakes, makes Chile a unique natural laboratory to study several streams that recorded responses to multiple seismic events. We document changes in discharge in eight streams in Chile following two or more large earthquakes. In all cases, discharge increases. Changes in discharge occur for peak ground velocities greater than about 7-11cm/s. Above that threshold, the magnitude of both the increase in discharge and the total excess water do not increase with increasing peak ground velocities. While these observations are consistent with previous work in California, they conflict with lab experiments that show that the magnitude of permeability changes increases with increasing amplitude of ground motion. Instead, our study suggests that streamflow responses are binary. Plain Language Summary Earthquakes deform and shake the surface and the ground below. These changes may affect groundwater flows by increasing the permeability along newly formed cracks and/or clearing clogged pores. As a result, groundwater flow may substantially increase after earthquakes and remain elevated for several months. Here we document streamflow anomalies following multiple high magnitude earthquakes in multiple streams in one of the most earthquake prone regions worldwide, Chile. We take advantage of the dense monitoring network in Chile that recorded streamflow since the 1940s. We show that once a critical ground motion is exceeded, streamflow responses to earthquakes can be expected.}, language = {en} } @article{NathoTschikofBondarKunzeetal.2020, author = {Natho, Stephanie and Tschikof, Martin and Bondar-Kunze, Elisabeth and Hein, Thomas}, title = {Modeling the effect of enhanced lateral connectivity on nutrient retention capacity in large river floodplains}, series = {Frontiers in Environmental Science}, volume = {8}, journal = {Frontiers in Environmental Science}, publisher = {Frontiers Media}, address = {Lausanne}, issn = {2296-665X}, doi = {10.3389/fenvs.2020.00074}, pages = {16}, year = {2020}, abstract = {Floodplains have been degraded in Central Europe for centuries, resulting in less dynamic and less diverse ecosystems than in the past. They provide essential ecosystem services like nutrient retention to improve overall water quality and thus fulfill naturally what EU legislation demands, but this service is impaired by reduced connectivity patterns. Along the second-longest river in Europe, the Danube, restoration measures have been carried out and are planned for the near future in the Austrian Danube Floodplain National Park in accordance with navigation purposes. We investigated nutrient retention capacity in seven currently differently connected side arms and the effects of proposed restoration measures using two complementary modeling approaches. We modeled nutrient retention capacity in two scenarios considering different hydrological conditions, as well as the consequences of planned restoration measures for side arm connectivity. With existing monitoring data on hydrology, nitrate, and total phosphorus concentrations for three side arms, we applied a statistical model and compared these results to a semi-empirical retention model. The latter was originally developed for larger scales, based on transferable causalities of retention processes and set up for this floodplain with publicly available data. Both model outcomes are in a comparable range for NO3-N (77-198 kg ha(-1)yr(-1)) and TP (1.4-5.7 kg ha(-1)yr(-1)) retention and agree in calculating higher retention in floodplains, where reconnection allows more frequent inundation events. However, the differences in the model results are significant for specific aspects especially during high flows, where the semi-empirical model complements the statistical model. On the other hand, the statistical model complements the semi-empirical model when taking into account nutrient retention at times of no connection between the remaining water bodies left in the floodplain. Overall, both models show clearly that nutrient retention in the Danube floodplains can be enhanced by restoring lateral hydrological reconnection and, for all planned measures, a positive effect on the overall water quality of the Danube River is expected. Still, a frequently hydrologically connected stretch of national park is insufficient to improve the water quality of the whole Upper Danube, and more functional floodplains are required.}, language = {en} } @misc{NikoloskivanDongen2011, author = {Nikoloski, Zoran and van Dongen, Joost T.}, title = {Modeling alternatives for interpreting the change in oxygen-consumption rates during hypoxic conditions}, series = {New phytologist : international journal of plant science}, volume = {190}, journal = {New phytologist : international journal of plant science}, number = {2}, publisher = {Wiley-Blackwell}, address = {Malden}, issn = {0028-646X}, doi = {10.1111/j.1469-8137.2011.03674.x}, pages = {273 -- 276}, year = {2011}, language = {en} } @article{OmarovaYerezhepAldiyarovetal.2022, author = {Omarova, Zhansaya and Yerezhep, Darkhan and Aldiyarov, Abdurakhman and Tokmoldin, Nurlan}, title = {In Silico Investigation of the Impact of Hole-Transport Layers on the Performance of CH3NH3SnI3 Perovskite Photovoltaic Cells}, series = {Crystals}, volume = {12}, journal = {Crystals}, number = {5}, publisher = {MDPI}, address = {Basel}, issn = {2073-4352}, doi = {10.3390/cryst12050699}, pages = {17}, year = {2022}, abstract = {Perovskite solar cells represent one of the recent success stories in photovoltaics. The device efficiency has been steadily increasing over the past years, but further work is needed to enhance the performance, for example, through the reduction of defects to prevent carrier recombination. SCAPS-1D simulations were performed to assess efficiency limits and identify approaches to decrease the impact of defects, through the selection of an optimal hole-transport material and a hole-collecting electrode. Particular attention was given to evaluation of the influence of bulk defects within light-absorbing CH3NH3SnI3 layers. In addition, the study demonstrates the influence of interface defects at the TiO2/CH3NH3SnI3 (IL1) and CH3NH3SnI3/HTL (IL2) interfaces across the similar range of defect densities. Finally, the optimal device architecture TiO2/CH3NH3SnI3/Cu2O is proposed for the given absorber layer using the readily available Cu2O hole-transporting material with PCE = 27.95\%, FF = 84.05\%, V-OC = 1.02 V and J(SC) = 32.60 mA/cm(2), providing optimal performance and enhanced resistance to defects.}, language = {en} } @article{RichterHainzlDahmetal.2020, author = {Richter, Gudrun and Hainzl, Sebastian and Dahm, Torsten and Z{\"o}ller, Gert}, title = {Stress-based, statistical modeling of the induced seismicity at the Groningen gas field}, series = {Environmental earth sciences}, volume = {79}, journal = {Environmental earth sciences}, number = {11}, publisher = {Springer}, address = {New York}, issn = {1866-6280}, doi = {10.1007/s12665-020-08941-4}, pages = {15}, year = {2020}, abstract = {Groningen is the largest onshore gas field under production in Europe. The pressure depletion of the gas field started in 1963. In 1991, the first induced micro-earthquakes have been located at reservoir level with increasing rates in the following decades. Most of these events are of magnitude less than 2.0 and cannot be felt. However, maximum observed magnitudes continuously increased over the years until the largest, significant event with ML=3.6 was recorded in 2014, which finally led to the decision to reduce the production. This causal sequence displays the crucial role of understanding and modeling the relation between production and induced seismicity for economic planing and hazard assessment. Here we test whether the induced seismicity related to gas exploration can be modeled by the statistical response of fault networks with rate-and-state-dependent frictional behavior. We use the long and complete local seismic catalog and additionally detailed information on production-induced changes at the reservoir level to test different seismicity models. Both the changes of the fluid pressure and of the reservoir compaction are tested as input to approximate the Coulomb stress changes. We find that the rate-and-state model with a constant tectonic background seismicity rate can reproduce the observed long delay of the seismicity onset. In contrast, so-called Coulomb failure models with instantaneous earthquake nucleation need to assume that all faults are initially far from a critical state of stress to explain the delay. Our rate-and-state model based on the fluid pore pressure fits the spatiotemporal pattern of the seismicity best, where the fit further improves by taking the fault density and orientation into account. Despite its simplicity with only three free parameters, the rate-and-state model can reproduce the main statistical features of the observed activity.}, language = {en} } @article{SimikWierzba2017, author = {Simik, Radek and Wierzba, Marta}, title = {EXPRESSION OF INFORMATION STRUCTURE IN WEST SLAVIC: MODELING THE IMPACT OF PROSODIC AND WORD-ORDER FACTORS}, series = {Language : journal of the Linguistic Society of America}, volume = {93}, journal = {Language : journal of the Linguistic Society of America}, publisher = {Linguistic Society of America}, address = {Washington}, issn = {0097-8507}, doi = {10.1353/lan.2017.0040}, pages = {671 -- 709}, year = {2017}, abstract = {The received wisdom is that word-order alternations in Slavic languages arise as a direct consequence of word-order-related information-structure constraints such as 'Place given expressions before new ones'. In this article, we compare the word-order hypothesis with a competing one, according to which word-order alternations arise as a consequence of a prosodic constraint: 'Avoid stress on given expressions'. Based on novel experimental and modeling data, we conclude that the prosodic hypothesis is more adequate than the word-order hypothesis. Yet we also show that combining the strengths of both hypotheses provides the best fit for the data. Methodologically, our article is based on gradient acceptability judgments and multiple regression, which allows us to evaluate whether violations of generalizations like 'Given precedes new' or 'Given lacks stress' lead to a consistent decrease in acceptability and to quantify the size of their respective effects. Focusing on the empirical adequacy of such generalizations rather than on specific theoretical implementations also makes it possible to bridge the gap between different linguistic traditions and to directly compare predictions emerging from formal and functional approaches.}, language = {en} } @article{StillmanRailsbackGiskeetal.2015, author = {Stillman, Richard A. and Railsback, Steven Floyd and Giske, Jarl and Berger, Uta and Grimm, Volker}, title = {Making Predictions in a Changing World: The Benefits of Individual-Based Ecology}, series = {Bioscience}, volume = {65}, journal = {Bioscience}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0006-3568}, doi = {10.1093/biosci/biu192}, pages = {140 -- 150}, year = {2015}, abstract = {Ecologists urgently need a better ability to predict how environmental change affects biodiversity. We examine individual-based ecology (IBE), a research paradigm that promises better a predictive ability by using individual-based models (IBMs) to represent ecological dynamics as arising from how individuals interact with their environment and with each other. A key advantage of IBMs is that the basis for predictions-fitness maximization by individual organisms-is more general and reliable than the empirical relationships that other models depend on. Case studies illustrate the usefulness and predictive success of long-term IBE programs. The pioneering programs had three phases: conceptualization, implementation, and diversification. Continued validation of models runs throughout these phases. The breakthroughs that make IBE more productive include standards for describing and validating IBMs, improved and standardized theory for individual traits and behavior, software tools, and generalized instead of system-specific IBMs. We provide guidelines for pursuing IBE and a vision for future IBE research.}, language = {en} } @article{WangShprits2019, author = {Wang, Dedong and Shprits, Yuri Y.}, title = {On How High-Latitude Chorus Waves Tip the Balance Between Acceleration and Loss of Relativistic Electrons}, series = {Geophysical research letters}, volume = {46}, journal = {Geophysical research letters}, number = {14}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1029/2019GL082681}, pages = {7945 -- 7954}, year = {2019}, abstract = {Modeling and observations have shown that energy diffusion by chorus waves is an important source of acceleration of electrons to relativistic energies. By performing long-term simulations using the three-dimensional Versatile Electron Radiation Belt code, in this study, we test how the latitudinal dependence of chorus waves can affect the dynamics of the radiation belt electrons. Results show that the variability of chorus waves at high latitudes is critical for modeling of megaelectron volt (MeV) electrons. We show that, depending on the latitudinal distribution of chorus waves under different geomagnetic conditions, they cannot only produce a net acceleration but also a net loss of MeV electrons. Decrease in high-latitude chorus waves can tip the balance between acceleration and loss toward acceleration, or alternatively, the increase in high-latitude waves can result in a net loss of MeV electrons. Variations in high-latitude chorus may account for some of the variability of MeV electrons.}, language = {en} }