@phdthesis{Kehm2019, author = {Kehm, Richard}, title = {The impact of metabolic stress and aging on functionality and integrity of pancreatic islets and beta-cells}, doi = {10.25932/publishup-44109}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441099}, school = {Universit{\"a}t Potsdam}, pages = {VI, 138}, year = {2019}, abstract = {The increasing age of worldwide population is a major contributor for the rising prevalence of major pathologies and disease, such as type 2 diabetes, mediated by massive insulin resistance and a decline in functional beta-cell mass, highly associated with an elevated incidence of obesity. Thus, the impact of aging under physiological conditions and in combination with diet-induced metabolic stress on characteristics of pancreatic islets and beta-cells, with the focus on functionality and structural integrity, were investigated in the present dissertation. Primarily induced by malnutrition due to chronic and excess intake of high caloric diets, containing large amounts of carbohydrates and fats, obesity followed by systemic inflammation and peripheral insulin resistance occurs over time, initiating metabolic stress conditions. Elevated insulin demands initiate an adaptive response by beta-cell mass expansion due to increased proliferation, but prolonged stress conditions drive beta-cell failure and loss. Aging has been also shown to affect beta-cell functionality and morphology, in particular by proliferative limitations. However, most studies in rodents were performed under beta-cell challenging conditions, such as high-fat diet interventions. Thus, in the first part of the thesis (publication I), a characterization of age-related alterations on pancreatic islets and beta-cells was performed by using plasma samples and pancreatic tissue sections of standard diet-fed C57BL/6J wild-type mice in several age groups (2.5, 5, 10, 15 and 21 months). Aging was accompanied by decreased but sustained islet proliferative potential as well as an induction of cellular senescence. This was associated with a progressive islet expansion to maintain normoglycemia throughout lifespan. Moreover, beta-cell function and mass were not impaired although the formation and accumulation of AGEs occurred, located predominantly in the islet vasculature, accompanied by an induction of oxidative and nitrosative (redox) stress. The nutritional behavior throughout human lifespan; however, is not restricted to a balanced diet. This emphasizes the significance to investigate malnutrition by the intake of high-energy diets, inducing metabolic stress conditions that synergistically with aging might amplify the detrimental effects on endocrine pancreas. Using diabetes-prone NZO mice aged 7 weeks, fed a dietary regimen of carbohydrate restriction for different periods (young mice - 11 weeks, middle-aged mice - 32 weeks) followed by a carbohydrate intervention for 3 weeks, offered the opportunity to distinguish the effects of diet-induced metabolic stress in different ages on the functionality and integrity of pancreatic islets and their beta-cells (publication II, manuscript). Interestingly, while young NZO mice exhibited massive hyperglycemia in response to diet-induced metabolic stress accompanied by beta-cell dysfunction and apoptosis, middle-aged animals revealed only moderate hyperglycemia by the maintenance of functional beta-cells. The loss of functional beta-cell mass in islets of young mice was associated with reduced expression of PDX1 transcription factor, increased endocrine AGE formation and related redox stress as well as TXNIP-dependent induction of the mitochondrial death pathway. Although the amounts of secreted insulin and the proliferative potential were comparable in both age groups, islets of middle-aged mice exhibited sustained PDX1 expression, almost regular insulin secretory function, increased capacity for cell cycle progression as well as maintained redox potential. The results of the present thesis indicate a loss of functional beta-cell mass in young diabetes-prone NZO mice, occurring by redox imbalance and induction of apoptotic signaling pathways. In contrast, aging under physiological conditions in C57BL/6J mice and in combination with diet-induced metabolic stress in NZO mice does not appear to have adverse effects on the functionality and structural integrity of pancreatic islets and beta-cells, associated with adaptive responses on changing metabolic demands. However, considering the detrimental effects of aging, it has to be assumed that the compensatory potential of mice might be exhausted at a later point of time, finally leading to a loss of functional beta-cell mass and the onset and progression of type 2 diabetes. The polygenic, diabetes-prone NZO mouse is a suitable model for the investigation of human obesity-associated type 2 diabetes. However, mice at advanced age attenuated the diabetic phenotype or do not respond to the dietary stimuli. This might be explained by the middle age of mice, corresponding to the human age of about 38-40 years, in which the compensatory mechanisms of pancreatic islets and beta cells towards metabolic stress conditions are presumably more active.}, language = {en} } @phdthesis{Grafe2019, author = {Grafe, Marianne Erika}, title = {Analysis of supramolecular assemblies of NE81, the first lamin protein in a non-metazoan organism}, doi = {10.25932/publishup-44180}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441802}, school = {Universit{\"a}t Potsdam}, pages = {V, 94}, year = {2019}, abstract = {Lamine sind Proteine an der inneren Kernh{\"u}lle und bilden zusammen mit verbundenen Proteinen die nukle{\"a}re Lamina. Dieses Netzwerk sorgt f{\"u}r die Stabilit{\"a}t des Zellkerns und unterst{\"u}tzt die Organisation des Zell-Zytoskeletts. Zus{\"a}tzlich sind Lamine und ihre verbundenen Proteine in viele Prozesse wie Genregulation und Zelldifferenzierung involviert. Bis 2012 war der Stand der Forschung, dass nur bei mehrzelligen Organismen eine nukle{\"a}re Lamina zu finden ist. NE81 ist das erste lamin-{\"a}hnliche Protein, das in einem nicht-mehrzelligen Organismus (Dictyostelium discoideum) entdeckt wurde. Es hat viele Eigenschaften und Strukturmerkmale mit Laminen gemeinsam. Dazu z{\"a}hlt der dreiteilige Aufbau des Proteins, eine Phosphorylierungsstelle f{\"u}r ein Zellzyklus-abh{\"a}ngiges Enzym, ein Kernlokalisationssignal, wodurch das Protein in den Kern transportiert wird, sowie eine C-terminale Sequenz zur Verankerung des Proteins in der Kernh{\"u}lle. In dieser Arbeit wurden verschiedene Methoden zur vereinfachten Untersuchung von Laminstrukturen getestet, um zu zeigen, dass sich NE81 wie bereits bekannte Lamin-Proteine verh{\"a}lt und supramolekulare Netzwerke aus Laminfilamenten bildet. Zur Analyse der Struktur supramolekularer Anordnungen wurde das Protein durch Entfernen des Kernlokalisationssignals auf der {\"a}ußeren Kernh{\"u}lle von Dictyostelium gebildet. Die anschließende Untersuchung der Oberfl{\"a}che der Kerne mit einem Rasterelektronenmikroskop zeigte, dass NE81 Strukturen in der Gr{\"o}ße von Laminen bildet, allerdings nicht in regelm{\"a}ßigen filament{\"o}sen Anordnungen. Um die Entstehung der Laminfilamente zu untersuchen, wurde l{\"o}sliches NE81 aus Dictyostelium aufgereinigt und mit verschiedenen mikroskopischen Methoden untersucht. Dabei wurde festgestellt, dass NE81 unter Niedrigsalz-Bedingungen d{\"u}nne, fadenf{\"o}rmige Strukturen und Netzwerke ausbildet, die denen von S{\"a}ugetier-Laminen sehr {\"a}hnlich sind. Die Mutation der Phosphorylierungsstelle von NE81 zu einer imitierenden dauerhaften Phosphorylierung von NE81 in der Zelle, zeigte zun{\"a}chst ein gel{\"o}stes Protein, das {\"u}berraschenderweise unter Blaulichtbestrahlung der Zelle wieder lamin-{\"a}hnliche Anordnungen formte. Die Ergebnisse dieser Arbeit zeigen, dass NE81 echte Laminstrukturen ausbilden kann und hebt Dictyostelium als Nicht-S{\"a}ugetier-Modellorganismus mit einer gut charakterisierten Kernh{\"u}lle, mit allen relevanten, aus tierischen Zellen bekannten Proteinen, hervor.}, language = {en} } @phdthesis{Rector2019, author = {Rector, Michael V.}, title = {The acute effect of exercise on flow-mediated dilation in young people with cystic fibrosis}, doi = {10.25932/publishup-43893}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-438938}, school = {Universit{\"a}t Potsdam}, pages = {121}, year = {2019}, abstract = {Introduction: Cystic fibrosis (CF) is a genetic disease which disrupts the function of an epithelial surface anion channel, CFTR (cystic fibrosis transmembrane conductance regulator). Impairment to this channel leads to inflammation and infection in the lung causing the majority of morbidity and mortality. However, CF is a multiorgan disease affecting many tissues, including vascular smooth muscle. Studies have revealed young people with cystic fibrosis lacking inflammation and infection still demonstrate vascular endothelial dysfunction, measured per flow-mediated dilation (FMD). In other disease cohorts, i.e. diabetic and obese, endurance exercise interventions have been shown improve or taper this impairment. However, long-term exercise interventions are risky, as well as costly in terms of time and resources. Nevertheless, emerging research has correlated the acute effects of exercise with its long-term benefits and advocates the study of acute exercise effects on FMD prior to longitudinal studies. The acute effects of exercise on FMD have previously not been examined in young people with CF, but could yield insights on the potential benefits of long-term exercise interventions. The aims of these studies were to 1) develop and test the reliability of the FMD method and its applicability to study acute exercise effects; 2) compare baseline FMD and the acute exercise effect on FMD between young people with and without CF; and 3) explore associations between the acute effects of exercise on FMD and demographic characteristics, physical activity levels, lung function, maximal exercise capacity or inflammatory hsCRP levels. Methods: Thirty young volunteers (10 people with CF, 10 non-CF and 10 non-CF active matched controls) between the ages of 10 and 30 years old completed blood draws, pulmonary function tests, maximal exercise capacity tests and baseline FMD measurements, before returning approximately 1 week later and performing a 30-min constant load training at 75\% HRmax. FMD measurements were taken prior, immediately after, 30 minutes after and 1 hour after constant load training. ANOVAs and repeated measures ANOVAs were employed to explore differences between groups and timepoints, respectively. Linear regression was implemented and evaluated to assess correlations between FMD and demographic characteristics, physical activity levels, lung function, maximal exercise capacity or inflammatory hsCRP levels. For all comparisons, statistical significance was set at a p-value of α < 0.05. Results: Young people with CF presented with decreased lung function and maximal exercise capacity compared to matched controls. Baseline FMD was also significantly decreased in the CF group (CF: 5.23\% v non-CF: 8.27\% v non-CF active: 9.12\%). Immediately post-training, FMD was significantly attenuated (approximately 40\%) in all groups with CF still demonstrating the most minimal FMD. Follow-up measurements of FMD revealed a slow recovery towards baseline values 30 min post-training and improvements in the CF and non-CF active groups 60 min post-training. Linear regression exposed significant correlations between maximal exercise capacity (VO2 peak), BMI and FMD immediately post-training. Conclusion: These new findings confirm that CF vascular endothelial dysfunction can be acutely modified by exercise and will aid in underlining the importance of exercise in CF populations. The potential benefits of long-term exercise interventions on vascular endothelial dysfunction in young people with CF warrants further investigation.}, language = {en} } @phdthesis{Bieri2019, author = {Bieri, Pascal}, title = {Topmanager im Kreuzfeuer ihrer Dilemmata}, doi = {10.25932/publishup-44106}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441062}, school = {Universit{\"a}t Potsdam}, pages = {XIII, 301}, year = {2019}, abstract = {Die vorliegende Forschungsarbeit untersucht den Umgang mit Dilemmata von Topmanagern. Dilemmata sind ein allt{\"a}gliches Gesch{\"a}ft im Topmanagement. Die entsprechenden Akteure sind daher immer wieder mit diesen konfrontiert und mit ihnen umzugehen, geh{\"o}rt gewissermaßen zu ihrer Berufsbeschreibung. Hinzu kommen Dilemmata im nicht direkt gesch{\"a}ftlichen Bereich, wie zum Beispiel jene zwischen Familien- und Arbeitszeit. Doch stellt dieses Feld ein kaum untersuchtes Forschungsgebiet dar. W{\"a}hrend Dilemmata in anderen Bereichen eine zunehmende Aufmerksamkeit erfuhren, wurden deren Besonderheiten im Topmanagement genauso wenig differenziert betrachtet wie zugeh{\"o}rige Umgangsweisen. Theorie und Praxis stellen bez{\"u}glich Dilemmata von Topmanagern vor allem einen Gegensatz dar, beziehungsweise fehlt es an einer theoretischen Fundierung der Empirie. Diesem Umstand wird mittels dieser Studie begegnet. Auf der Grundlage einer differenzierten und breiten Erfassung von Theorien zu Dilemmata, so diese auch noch nicht auf Topmanager bezogen wurden, und einer empirischen Erhebung, die im Mittelpunkt dieser Arbeit stehen, soll das Feld Dilemmata von Topmanagern der Forschung ge{\"o}ffnet werden. Empirische Grundlage sind vor allem narrative Interviews mit Topmanagern {\"u}ber ihre Dilemmata-Wahrnehmung, ausgemachte Ursachen, Umgangsweisen und Resultate. Dies erlaubt es, Topmanagertypen sowie Dilemmata-Arten, mit denen sie konfrontiert sind oder waren, analytisch herauszuarbeiten. Angesichts der Praxisrelevanz von Dilemmata von Topmanagern wird jedoch nicht nur ein theoretisches Modell zu dieser Thematik erarbeitet, es werden auch Reflexionen auf die Praxis in Form von Handlungsempfehlungen vorgenommen. Schließlich gilt es, die allgemeine Theorie zu Dilemmata, ohne konkreten Bezug zu Topmanagern, mit den theoretischen Erkenntnissen dieser Studie auf empirischer Basis zu kontrastieren. Dabei wird im Rahmen der empirischen Erfassung und Auswertung dem Ansatz der Grounded-Theory-Methodologie gefolgt.}, language = {de} } @phdthesis{Riemer2019, author = {Riemer, Janine}, title = {Synthese und Charakterisierung selektiver Fluoroionophore f{\"u}r intra- und extrazellul{\"a}re Bestimmungen von Kalium- und Natrium-Ionen}, doi = {10.25932/publishup-44193}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441932}, school = {Universit{\"a}t Potsdam}, pages = {IV, 165}, year = {2019}, abstract = {Im Rahmen dieser Dissertation konnten neue Kalium- und Natrium-Ionen Fluoreszenzfarbstoffe von der Klasse der Fluoroionophore synthetisiert und charakterisiert werden. Sie bestehen aus einem N Phenylazakronenether als Ionophor und unterschiedlichen Fluorophoren und sind {\"u}ber einen π-konjugierten 1,2,3-Triazol-1,4-diyl Spacer verbunden. Dabei lag der Fokus w{\"a}hrend ihrer Entwicklung darauf, diese in ihrer Sensitivit{\"a}t, Selektivit{\"a}t und in ihren photophysikalischen Eigenschaften so zu funktionalisieren, dass sie f{\"u}r intra- bzw. extrazellul{\"a}re Konzentrationsbestimmungen geeignet sind. Durch Variation der in ortho Position der N-Phenylazakronenether befindlichen Alkoxy-Gruppen und der fluorophoren Gruppe der Fluoroionophore konnte festgestellt werden, dass die Sensitivit{\"a}t und Selektivit{\"a}t f{\"u}r Kalium- bzw. Natrium-Ionen jeweils durch eine bestimmte Isomerie der 1,2,3-Triazol-1,4-diyl-Einheit erh{\"o}ht wird. Des Weiteren wurde gezeigt, dass durch eine erh{\"o}hte Einschr{\"a}nkung der N,N-Diethylamino-Gruppe des Fluorophors eine Steigerung der Fluoreszenzquantenausbeute und eine Verschiebung des Emissionsmaximums auf {\"u}ber 500 nm erreicht werden konnte. Die Einf{\"u}hrung einer Isopropoxy-Gruppe an einem N-Phenylaza-[18]krone-6-ethers resultierte dabei in einem hoch selektiven Kalium-Ionen Fluoroionophor und erm{\"o}glichte eine in vitro {\"U}berwachung von 10 - 80 mM Kalium-Ionen. Die Substitution einer Methoxy-Gruppe an einem N-Phenylaza-[15]krone-5-ether kombiniert mit unterschiedlich N,N-Diethylamino-Coumarinen lieferte hingegen zwei Natrium-Ionen Fluoroionophore, die f{\"u}r die {\"U}berwachung von intra- bzw. extrazellul{\"a}ren Natrium-Ionen Konzentrationen geeignet sind. In einem weiteren Schritt wurden N-Phenylaza-[18]krone-6-ether mit einem Fluorophor, basierend auf einem [1,3]-Dioxolo[4,5-f][1,3]benzodioxol-(DBD)-Grundger{\"u}st, funktionalisiert. Die im Anschluss durchgef{\"u}hrten spektroskopischen Untersuchungen ergaben, dass die Isopropoxy-Gruppe in ortho Position des N-Phenylaza-[18]krone-6-ether in einen f{\"u}r extrazellul{\"a}re Kalium-Ionen Konzentrationen selektiven Fluoroionophor resultierte, der die Konzentrationsbestimmungen {\"u}ber die Fluoreszenzintensit{\"a}t und -lebensdauer erm{\"o}glicht. In einem abschließenden Schritt konnte unter Verwendung eines Pyrens als fluorophore Gruppe ein weiterer f{\"u}r extrazellul{\"a}re Kalium-Ionen Konzentrationen geeigneter Fluoroionophor entwickelt werden. Die Bestimmung der Kalium-Ionen Konzentration erfolgte hierbei anhand der Fluoreszenzintensit{\"a}tsverh{\"a}ltnisse bei zwei Emissionswellenl{\"a}ngen. Insgesamt konnten 17 verschiedene neue Fluoroionophore f{\"u}r die Bestimmung von Kalium- bzw. Natrium-Ionen synthetisiert und charakterisiert werden. Sechs dieser neuen Molek{\"u}le erm{\"o}glichen in vitro Messungen der intra- oder extrazellul{\"a}ren Kalium- und Natrium-Ionen Konzentrationen und k{\"o}nnten zuk{\"u}nftig f{\"u}r in vivo Konzentrationsmessungen verwendet werden.}, language = {de} } @phdthesis{Debsharma2019, author = {Debsharma, Tapas}, title = {Cellulose derived polymers}, doi = {10.25932/publishup-44131}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441312}, school = {Universit{\"a}t Potsdam}, pages = {x, 103}, year = {2019}, abstract = {Plastics, such as polyethylene, polypropylene, and polyethylene terephthalate are part of our everyday lives in the form of packaging, household goods, electrical insulation, etc. These polymers are non-degradable and create many environmental problems and public health concerns. Additionally, these polymers are produced from finite fossils resources. With the continuous utilization of these limited resources, it is important to look towards renewable sources along with biodegradation of the produced polymers, ideally. Although many bio-based polymers are known, such as polylactic acid, polybutylene succinate adipate or polybutylene succinate, none have yet shown the promise of replacing conventional polymers like polyethylene, polypropylene and polyethylene terephthalate. Cellulose is one of the most abundant renewable resources produced in nature. It can be transformed into various small molecules, such as sugars, furans, and levoglucosenone. The aim of this research is to use the cellulose derived molecules for the synthesis of polymers. Acid-treated cellulose was subjected to thermal pyrolysis to obtain levoglucosenone, which was reduced to levoglucosenol. Levoglucosenol was polymerized, for the first time, by ring-opening metathesis polymerization (ROMP) yielding high molar mass polymers of up to ~150 kg/mol. The poly(levoglucosenol) is thermally stable up to ~220 ℃, amorphous, and is exhibiting a relatively high glass transition temperature of ~100 ℃. The poly(levoglucosenol) can be converted to a transparent film, resembling common plastic, and was found to degrade in a moist acidic environment. This means that poly(levoglucosenol) may find its use as an alternative to conventional plastic, for instance, polystyrene. Levoglucosenol was also converted into levoglucosenyl methyl ether, which was polymerized by cationic ring-opening metathesis polymerization (CROP). Polymers were obtained with molar masses up to ~36 kg/mol. These polymers are thermally stable up to ~220 ℃ and are semi-crystalline thermoplastics, having a glass transition temperature of ~35 ℃ and melting transition of 70-100 ℃. Additionally, the polymers underwent cross-linking, hydrogenation and thiol-ene click chemistry.}, language = {en} } @phdthesis{Meinig2019, author = {Meinig, Michael}, title = {Bedrohungsanalyse f{\"u}r milit{\"a}rische Informationstechnik}, doi = {10.25932/publishup-44160}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441608}, school = {Universit{\"a}t Potsdam}, pages = {X, 137}, year = {2019}, abstract = {Risiken f{\"u}r Cyberressourcen k{\"o}nnen durch unbeabsichtigte oder absichtliche Bedrohungen entstehen. Dazu geh{\"o}ren Insider-Bedrohungen von unzufriedenen oder nachl{\"a}ssigen Mitarbeitern und Partnern, eskalierende und aufkommende Bedrohungen aus aller Welt, die stetige Weiterentwicklung der Angriffstechnologien und die Entstehung neuer und zerst{\"o}rerischer Angriffe. Informationstechnik spielt mittlerweile in allen Bereichen des Lebens eine entscheidende Rolle, u. a. auch im Bereich des Milit{\"a}rs. Ein ineffektiver Schutz von Cyberressourcen kann hier Sicherheitsvorf{\"a}lle und Cyberattacken erleichtern, welche die kritischen Vorg{\"a}nge st{\"o}ren, zu unangemessenem Zugriff, Offenlegung, {\"A}nderung oder Zerst{\"o}rung sensibler Informationen f{\"u}hren und somit die nationale Sicherheit, das wirtschaftliche Wohlergehen sowie die {\"o}ffentliche Gesundheit und Sicherheit gef{\"a}hrden. Oftmals ist allerdings nicht klar, welche Bedrohungen konkret vorhanden sind und welche der kritischen Systemressourcen besonders gef{\"a}hrdet ist. In dieser Dissertation werden verschiedene Analyseverfahren f{\"u}r Bedrohungen in milit{\"a}rischer Informationstechnik vorgeschlagen und in realen Umgebungen getestet. Dies bezieht sich auf Infrastrukturen, IT-Systeme, Netze und Anwendungen, welche Verschlusssachen (VS)/Staatsgeheimnisse verarbeiten, wie zum Beispiel bei milit{\"a}rischen oder Regierungsorganisationen. Die Besonderheit an diesen Organisationen ist das Konzept der Informationsr{\"a}ume, in denen verschiedene Datenelemente, wie z. B. Papierdokumente und Computerdateien, entsprechend ihrer Sicherheitsempfindlichkeit eingestuft werden, z. B. „STRENG GEHEIM", „GEHEIM", „VS-VERTRAULICH", „VS-NUR-F{\"U}R-DEN-DIENSTGEBRAUCH" oder „OFFEN". Die Besonderheit dieser Arbeit ist der Zugang zu eingestuften Informationen aus verschiedenen Informationsr{\"a}umen und der Prozess der Freigabe dieser. Jede in der Arbeit entstandene Ver{\"o}ffentlichung wurde mit Angeh{\"o}rigen in der Organisation besprochen, gegengelesen und freigegeben, so dass keine eingestuften Informationen an die {\"O}ffentlichkeit gelangen. Die Dissertation beschreibt zun{\"a}chst Bedrohungsklassifikationsschemen und Angreiferstrategien, um daraus ein ganzheitliches, strategiebasiertes Bedrohungsmodell f{\"u}r Organisationen abzuleiten. Im weiteren Verlauf wird die Erstellung und Analyse eines Sicherheitsdatenflussdiagramms definiert, welches genutzt wird, um in eingestuften Informationsr{\"a}umen operationelle Netzknoten zu identifizieren, die aufgrund der Bedrohungen besonders gef{\"a}hrdet sind. Die spezielle, neuartige Darstellung erm{\"o}glicht es, erlaubte und verbotene Informationsfl{\"u}sse innerhalb und zwischen diesen Informationsr{\"a}umen zu verstehen. Aufbauend auf der Bedrohungsanalyse werden im weiteren Verlauf die Nachrichtenfl{\"u}sse der operationellen Netzknoten auf Verst{\"o}ße gegen Sicherheitsrichtlinien analysiert und die Ergebnisse mit Hilfe des Sicherheitsdatenflussdiagramms anonymisiert dargestellt. Durch Anonymisierung der Sicherheitsdatenflussdiagramme ist ein Austausch mit externen Experten zur Diskussion von Sicherheitsproblematiken m{\"o}glich. Der dritte Teil der Arbeit zeigt, wie umfangreiche Protokolldaten der Nachrichtenfl{\"u}sse dahingehend untersucht werden k{\"o}nnen, ob eine Reduzierung der Menge an Daten m{\"o}glich ist. Dazu wird die Theorie der groben Mengen aus der Unsicherheitstheorie genutzt. Dieser Ansatz wird in einer Fallstudie, auch unter Ber{\"u}cksichtigung von m{\"o}glichen auftretenden Anomalien getestet und ermittelt, welche Attribute in Protokolldaten am ehesten redundant sind.}, language = {de} } @phdthesis{Knoechel2019, author = {Kn{\"o}chel, Jane}, title = {Model reduction of mechanism-based pharmacodynamic models and its link to classical drug effect models}, doi = {10.25932/publishup-44059}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440598}, school = {Universit{\"a}t Potsdam}, pages = {vii, 147}, year = {2019}, abstract = {Continuous insight into biological processes has led to the development of large-scale, mechanistic systems biology models of pharmacologically relevant networks. While these models are typically designed to study the impact of diverse stimuli or perturbations on multiple system variables, the focus in pharmacological research is often on a specific input, e.g., the dose of a drug, and a specific output related to the drug effect or response in terms of some surrogate marker. To study a chosen input-output pair, the complexity of the interactions as well as the size of the models hinders easy access and understanding of the details of the input-output relationship. The objective of this thesis is the development of a mathematical approach, in specific a model reduction technique, that allows (i) to quantify the importance of the different state variables for a given input-output relationship, and (ii) to reduce the dynamics to its essential features -- allowing for a physiological interpretation of state variables as well as parameter estimation in the statistical analysis of clinical data. We develop a model reduction technique using a control theoretic setting by first defining a novel type of time-limited controllability and observability gramians for nonlinear systems. We then show the superiority of the time-limited generalised gramians for nonlinear systems in the context of balanced truncation for a benchmark system from control theory. The concept of time-limited controllability and observability gramians is subsequently used to introduce a state and time-dependent quantity called the input-response (ir) index that quantifies the importance of state variables for a given input-response relationship at a particular time. We subsequently link our approach to sensitivity analysis, thus, enabling for the first time the use of sensitivity coefficients for state space reduction. The sensitivity based ir-indices are given as a product of two sensitivity coefficients. This allows not only for a computational more efficient calculation but also for a clear distinction of the extent to which the input impacts a state variable and the extent to which a state variable impacts the output. The ir-indices give insight into the coordinated action of specific state variables for a chosen input-response relationship. Our developed model reduction technique results in reduced models that still allow for a mechanistic interpretation in terms of the quantities/state variables of the original system, which is a key requirement in the field of systems pharmacology and systems biology and distinguished the reduced models from so-called empirical drug effect models. The ir-indices are explicitly defined with respect to a reference trajectory and thereby dependent on the initial state (this is an important feature of the measure). This is demonstrated for an example from the field of systems pharmacology, showing that the reduced models are very informative in their ability to detect (genetic) deficiencies in certain physiological entities. Comparing our novel model reduction technique to the already existing techniques shows its superiority. The novel input-response index as a measure of the importance of state variables provides a powerful tool for understanding the complex dynamics of large-scale systems in the context of a specific drug-response relationship. Furthermore, the indices provide a means for a very efficient model order reduction and, thus, an important step towards translating insight from biological processes incorporated in detailed systems pharmacology models into the population analysis of clinical data.}, language = {en} } @phdthesis{Hanschmann2019, author = {Hanschmann, Raffael Tino}, title = {Stalling the engine? EU climate politics after the 'Great Recession'}, doi = {10.25932/publishup-44044}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440441}, school = {Universit{\"a}t Potsdam}, pages = {XXVIII, 303}, year = {2019}, abstract = {This dissertation investigates the impact of the economic and fiscal crisis starting in 2008 on EU climate policy-making. While the overall number of adopted greenhouse gas emission reduction policies declined in the crisis aftermath, EU lawmakers decided to introduce new or tighten existing regulations in some important policy domains. Existing knowledge about the crisis impact on EU legislative decision-making cannot explain these inconsistencies. In response, this study develops an actor-centred conceptual framework based on rational choice institutionalism that provides a micro-level link to explain how economic crises translate into altered policy-making patterns. The core theoretical argument draws on redistributive conflicts, arguing that tensions between 'beneficiaries' and 'losers' of a regulatory initiative intensify during economic crises and spill over to the policy domain. To test this hypothesis and using social network analysis, this study analyses policy processes in three case studies: The introduction of carbon dioxide emission limits for passenger cars, the expansion of the EU Emissions Trading System to aviation, and the introduction of a regulatory framework for biofuels. The key finding is that an economic shock causes EU policy domains to polarise politically, resulting in intensified conflict and more difficult decision-making. The results also show that this process of political polarisation roots in the industry that is the subject of the regulation, and that intergovernmental bargaining among member states becomes more important, but also more difficult in times of crisis.}, language = {en} } @phdthesis{Ghani2019, author = {Ghani, Humaad}, title = {Structural evolution of the Kohat and Potwar fold and thrust belts of Pakistan}, doi = {10.25932/publishup-44077}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440775}, school = {Universit{\"a}t Potsdam}, pages = {viii, 121}, year = {2019}, abstract = {Fold and thrust belts are characteristic features of collisional orogen that grow laterally through time by deforming the upper crust in response to stresses caused by convergence. The deformation propagation in the upper crust is accommodated by shortening along major folds and thrusts. The formation of these structures is influenced by the mechanical strength of d{\´e}collements, basement architecture, presence of preexisting structures and taper of the wedge. These factors control not only the sequence of deformation but also cause differences in the structural style. The Himalayan fold and thrust belt exhibits significant differences in the structural style from east to west. The external zone of the Himalayan fold and thrust belt, also called the Subhimalaya, has been extensively studied to understand the temporal development and differences in the structural style in Bhutan, Nepal and India; however, the Subhimalaya in Pakistan remains poorly studied. The Kohat and Potwar fold and thrust belts (herein called Kohat and Potwar) represent the Subhimalaya in Pakistan. The Main Boundary Thrust (MBT) marks the northern boundary of both Kohat and Potwar, showing that these belts are genetically linked to foreland-vergent deformation within the Himalayan orogen, despite the pronounced contrast in structural style. This contrast becomes more pronounced toward south, where the active strike-slip Kalabagh Fault Zone links with the Kohat and Potwar range fronts, known as the Surghar Range and the Salt Range, respectively. The Surghar and Salt Ranges developed above the Surghar Thrust (SGT) and Main Frontal Thrust (MFT). In order to understand the structural style and spatiotemporal development of the major structures in Kohat and Potwar, I have used structural modeling and low temperature thermochronolgy methods in this study. The structural modeling is based on construction of balanced cross-sections by integrating surface geology, seismic reflection profiles and well data. In order to constrain the timing and magnitude of exhumation, I used apatite (U-Th-Sm)/He (AHe) and apatite fission track (AFT) dating. The results obtained from both methods are combined to document the Paleozoic to Recent history of Kohat and Potwar. The results of this research suggest two major events in the deformation history. The first major deformation event is related to Late Paleozoic rifting associated with the development of the Neo-Tethys Ocean. The second major deformation event is related to the Late Miocene to Pliocene development of the Himalayan fold and thrust belt in the Kohat and Potwar. The Late Paleozoic rifting is deciphered by inverse thermal modelling of detrital AFT and AHe ages from the Salt Range. The process of rifting in this area created normal faulting that resulted in the exhumation/erosion of Early to Middle Paleozoic strata, forming a major unconformity between Cambrian and Permian strata that is exposed today in the Salt Range. The normal faults formed in Late Paleozoic time played an important role in localizing the Miocene-Pliocene deformation in this area. The combination of structural reconstructions and thermochronologic data suggest that deformation initiated at 15±2 Ma on the SGT ramp in the southern part of Kohat. The early movement on the SGT accreted the foreland into the Kohat deforming wedge, forming the range front. The development of the MBT at 12±2 Ma formed the northern boundary of Kohat and Potwar. Deformation propagated south of the MBT in the Kohat on double d{\´e}collements and in the Potwar on a single basal d{\´e}collement. The double d{\´e}collement in the Kohat adopted an active roof-thrust deformation style that resulted in the disharmonic structural style in the upper and lower parts of the stratigraphic section. Incremental shortening resulted in the development of duplexes in the subsurface between two d{\´e}collements and imbrication above the roof thrust. Tectonic thickening caused by duplexes resulted in cooling and exhumation above the roof thrust by removal of a thick sequence of molasse strata. The structural modelling shows that the ramps on which duplexes formed in Kohat continue as tip lines of fault propagation folds in the Potwar. The absence of a double d{\´e}collement in the Potwar resulted in the preservation of a thick sequence of molasse strata there. The temporal data suggest that deformation propagated in-sequence from ~ 8 to 3 Ma in the northern part of Kohat and Potwar; however, internal deformation in the Kohat was more intense, probably required for maintaining a critical taper after a significant load was removed above the upper d{\´e}collement. In the southern part of Potwar, a steeper basement slope (β≥3°) and the presence of salt at the base of the stratigraphic section allowed for the complete preservation of the stratigraphic wedge, showcased by very little internal deformation. Activation of the MFT at ~4 Ma allowed the Salt Range to become the range front of the Potwar. The removal of a large amount of molasse strata above the MFT ramp enhanced the role of salt in shaping the structural style of the Salt Range and Kalabagh Fault Zone. Salt accumulation and migration resulted in the formation of normal faults in both areas. Salt migration in the Kalabagh fault zone has triggered out-of-sequence movement on ramps in the Kohat. The amount of shortening calculated between the MBT and the SGT in Kohat is 75±5 km and between the MBT and the MFT in Potwar is 65±5 km. A comparable amount of shortening is accommodated in the Kohat and Potwar despite their different widths: 70 km Kohat and 150 km Potwar. In summary, this research suggests that deformation switched between different structures during the last ~15 Ma through different modes of fault propagation, resulting in different structural styles and the out-of-sequence development of Kohat and Potwar.}, language = {en} } @phdthesis{Meessen2019, author = {Meeßen, Christian}, title = {The thermal and rheological state of the Northern Argentinian foreland basins}, doi = {10.25932/publishup-43994}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439945}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 151}, year = {2019}, abstract = {The foreland of the Andes in South America is characterised by distinct along strike changes in surface deformational styles. These styles are classified into two end-members, the thin-skinned and the thick-skinned style. The superficial expression of thin-skinned deformation is a succession of narrowly spaced hills and valleys, that form laterally continuous ranges on the foreland facing side of the orogen. Each of the hills is defined by a reverse fault that roots in a basal d{\´e}collement surface within the sedimentary cover, and acted as thrusting ramp to stack the sedimentary pile. Thick-skinned deformation is morphologically characterised by spatially disparate, basement-cored mountain ranges. These mountain ranges are uplifted along reactivated high-angle crustal-scale discontinuities, such as suture zones between different tectonic terranes. Amongst proposed causes for the observed variation are variations in the dip angle of the Nazca plate, variation in sediment thickness, lithospheric thickening, volcanism or compositional differences. The proposed mechanisms are predominantly based on geological observations or numerical thermomechanical modelling, but there has been no attempt to understand the mechanisms from a point of data-integrative 3D modelling. The aim of this dissertation is therefore to understand how lithospheric structure controls the deformational behaviour. The integration of independent data into a consistent model of the lithosphere allows to obtain additional evidence that helps to understand the causes for the different deformational styles. Northern Argentina encompasses the transition from the thin-skinned fold-and-thrust belt in Bolivia, to the thick-skinned Sierras Pampeanas province, which makes this area a well suited location for such a study. The general workflow followed in this study first involves data-constrained structural- and density-modelling in order to obtain a model of the study area. This model was then used to predict the steady-state thermal field, which was then used to assess the present-day rheological state in northern Argentina. The structural configuration of the lithosphere in northern Argentina was determined by means of data-integrative, 3D density modelling verified by Bouguer gravity. The model delineates the first-order density contrasts in the lithosphere in the uppermost 200 km, and discriminates bodies for the sediments, the crystalline crust, the lithospheric mantle and the subducting Nazca plate. To obtain the intra-crustal density structure, an automated inversion approach was developed and applied to a starting structural model that assumed a homogeneously dense crust. The resulting final structural model indicates that the crustal structure can be represented by an upper crust with a density of 2800 kg/m³, and a lower crust of 3100 kg/m³. The Transbrazilian Lineament, which separates the Pampia terrane from the R{\´i}o de la Plata craton, is expressed as a zone of low average crustal densities. In an excursion, we demonstrate in another study, that the gravity inversion method developed to obtain intra-crustal density structures, is also applicable to obtain density variations in the uppermost lithospheric mantle. Densities in such sub-crustal depths are difficult to constrain from seismic tomographic models due to smearing of crustal velocities. With the application to the uppermost lithospheric mantle in the north Atlantic, we demonstrate in Tan et al. (2018) that lateral density trends of at least 125\,km width are robustly recovered by the inversion method, thereby providing an important tool for the delineation of subcrustal density trends. Due to the genetic link between subduction, orogenesis and retroarc foreland basins the question rises whether the steady-state assumption is valid in such a dynamic setting. To answer this question, I analysed (i) the impact of subduction on the conductive thermal field of the overlying continental plate, (ii) the differences between the transient and steady-state thermal fields of a geodynamic coupled model. Both studies indicate that the assumption of a thermal steady-state is applicable in most parts of the study area. Within the orogenic wedge, where the assumption cannot be applied, I estimated the transient thermal field based on the results of the conducted analyses. Accordingly, the structural model that had been obtained in the first step, could be used to obtain a 3D conductive steady-state thermal field. The rheological assessment based on this thermal field indicates that the lithosphere of the thin-skinned Subandean ranges is characterised by a relatively strong crust and a weak mantle. Contrarily, the adjacent foreland basin consists of a fully coupled, very strong lithosphere. Thus, shortening in northern Argentina can only be accommodated within the weak lithosphere of the orogen and the Subandean ranges. The analysis suggests that the d{\´e}collements of the fold-and-thrust belt are the shallow continuation of shear zones that reside in the ductile sections of the orogenic crust. Furthermore, the localisation of the faults that provide strain transfer between the deeper ductile crust and the shallower d{\´e}collement is strongly influenced by crustal weak zones such as foliation. In contrast to the northern foreland, the lithosphere of the thick-skinned Sierras Pampeanas is fully coupled and characterised by a strong crust and mantle. The high overall strength prevents the generation of crustal-scale faults by tectonic stresses. Even inherited crustal-scale discontinuities, such as sutures, cannot sufficiently reduce the strength of the lithosphere in order to be reactivated. Therefore, magmatism that had been identified to be a precursor of basement uplift in the Sierras Pampeanas, is the key factor that leads to the broken foreland of this province. Due to thermal weakening, and potentially lubrication of the inherited discontinuities, the lithosphere is locally weakened such that tectonic stresses can uplift the basement blocks. This hypothesis explains both the spatially disparate character of the broken foreland, as well as the observed temporal delay between volcanism and basement block uplift. This dissertation provides for the first time a data-driven 3D model that is consistent with geophysical data and geological observations, and that is able to causally link the thermo-rheological structure of the lithosphere to the observed variation of surface deformation styles in the retroarc foreland of northern Argentina.}, language = {en} } @phdthesis{Schuerings2019, author = {Sch{\"u}rings, Marco Philipp Hermann}, title = {Synthesis of 1D microgel strands and their motion analysis in solution}, doi = {10.25932/publishup-43953}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439532}, school = {Universit{\"a}t Potsdam}, pages = {167}, year = {2019}, abstract = {The fabrication of 1D nanostrands composed of stimuli responsive microgels has been shown in this work. Microgels are well known materials able to respond to various stimuli from outer environment. Since these microgels respond via a volume change to an external stimulus, a targeted mechanical response can be achieved. Through carefully choosing the right composition of the polymer matrix, microgels can be designed to react precisely to the targeted stimuli (e.g. drug delivery via pH and temperature changes, or selective contractions through changes in electrical current125). In this work, it was aimed to create flexible nano-filaments which are capable of fast anisotropic contractions similar to muscle filaments. For the fabrication of such filaments or strands, nanostructured templates (PDMS wrinkles) were chosen due to a facile and low-cost fabrication and versatile tunability of their dimensions. Additionally, wrinkling is a well-known lithography-free method which enables the fabrication of nanostructures in a reproducible manner and with a high long-range periodicity. In Chapter 2.1, it was shown for the first time that microgels as soft matter particles can be aligned to densely packed microgel arrays of various lateral dimensions. The alignment of microgels with different compositions (e.g. VCL/AAEM, NIPAAm, NIPAAm/VCL and charged microgels) was shown by using different assembly techniques (e.g. spin-coating, template confined molding). It was chosen to set one experimental parameter constant which was the SiOx surface composition of the templates and substrates (e.g. oxidized PDMS wrinkles, Si-wafers and glass slides). It was shown that the fabrication of nanoarrays was feasible with all tested microgel types. Although the microgels exhibited different deformability when aligned on a flat surface, they retained their thermo-responsivity and swelling behavior. Towards the fabrication of 1D microgel strands interparticle connectivity was aspired. This was achieved via different cross-linking methods (i.e. cross-linking via UV-irradiation and host-guest complexation) discussed in Chapter 2.2. The microgel arrays created by different assembly methods and microgel types were tested for their cross-linking suitability. It was observed that NIPAAm based microgels cannot be cross-linked with UV light. Furthermore, it was found that these microgels exhibit a strong surface-particle-interaction and therefore could not be detached from the given substrates. In contrast to the latter, with VCL/AAEM based microgels it was possible to both UV cross-link them based on the keto-enol tautomerism of the AAEM copolymer, and to detach them from the substrate due to the lower adhesion energy towards SiOx surfaces. With VCL/AAEM microgels long, one-dimensional microgel strands could be re-dispersed in water for further analysis. It has also been shown that at least one lateral dimension of the free dispersed 1D microgel strands is easily controllable by adjusting the wavelength of the wrinkled template. For further work, only VCL/AAEM based microgels were used to focus on the main aim of this work, i.e. the fabrication of 1D microgel nanostrands. As an alternative to the unspecific and harsh UV cross-linking, the host-guest complexation via diazobenzene cross-linkers and cyclodextrin hosts was explored. The idea behind this approach was to give means to a future construction kit-like approach by incorporation of cyclodextrin comonomers in a broad variety of particle systems (e.g. microgels, nanoparticles). For this purpose, VCL/AAEM microgels were copolymerized with different amounts of mono-acrylate functionalized β-cyclodextrin (CD). After successfully testing the cross-linking capability in solution, the cross-linking of aligned VCL/AAEM/CD microgels was tried. Although the cross-linking worked well, once the single arrays came into contact to each other, they agglomerated. As a reason for this behavior residual amounts of mono-complexed diazobenzene linkers were suspected. Thus, end-capping strategies were tried out (e.g. excess amounts of β-cyclodextrin and coverage with azobenzene functionalized AuNPs) but were unsuccessful. With deeper thought, entropy effects were taken into consideration which favor the release of complexed diazobenzene linker leading to agglomerations. To circumvent this entropy driven effect, a multifunctional polymer with 50\% azobenzene groups (Harada polymer) was used. First experiments with this polymer showed promising results regarding a less pronounced agglomeration (Figure 77). Thus, this approach could be pursued in the future. In this chapter it was found out that in contrast to pearl necklace and ribbon like formations, particle alignment in zigzag formation provided the best compromise in terms of stability in dispersion (see Figure 44a and Figure 51) while maintaining sufficient flexibility. For this reason, microgel strands in zigzag formation were used for the motion analysis described in Chapter 2.3. The aim was to observe the properties of unrestrained microgel strands in solution (e.g. diffusion behavior, rotational properties and ideally, anisotropic contraction after temperature increase). Initially, 1D microgel strands were manipulated via AFM in a liquid cell setup. It could be observed that the strands required a higher load force compared to single microgels to be detached from the surface. However, with the AFM it was not possible to detach the strands in a controllable manner but resulted in a complete removal of single microgel particles and a tearing off the strands from the surface, respectively. For this reason, to observe the motion behavior of unrestrained microgel strands in solution, confocal microscopy was used. Furthermore, to hinder an adsorption of the strands, it was found out that coating the surface of the substrates with a repulsive polymer film was beneficial. Confocal and wide-field microscopy videos showed that the microgel strands exhibit translational and rotational diffusive motion in solution without perceptible bending. Unfortunately, with these methods the detection of the anisotropic stimuli responsive contraction of the free moving microgel strands was not possible. To summarize, the flexibility of microgel strands is more comparable to the mechanical behavior of a semi flexible cable than to a yarn. The strands studied here consist of dozens or even hundreds of discrete submicron units strung together by cross-linking, having few parallels in nanotechnology. With the insights gained in this work on microgel-surface interactions, in the future, a targeted functionalization of the template and substrate surfaces can be conducted to actively prevent unwanted microgel adsorption for a given microgel system (e.g. PVCL and polystyrene coating235). This measure would make the discussed alignment methods more diverse. As shown herein, the assembly methods enable a versatile microgel alignment (e.g. microgel meshes, double and triple strands). To go further, one could use more complex templates (e.g. ceramic rhombs and star shaped wrinkles (Figure 14) to expand the possibilities of microgel alignment and to precisely control their aspect ratios (e.g. microgel rods with homogeneous size distributions).}, language = {en} } @phdthesis{Kolk2019, author = {Kolk, Jens}, title = {The long-term legacy of historical land cover changes}, doi = {10.25932/publishup-43939}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439398}, school = {Universit{\"a}t Potsdam}, pages = {196}, year = {2019}, abstract = {Over the last years there is an increasing awareness that historical land cover changes and associated land use legacies may be important drivers for present-day species richness and biodiversity due to time-delayed extinctions or colonizations in response to historical environmental changes. Historically altered habitat patches may therefore exhibit an extinction debt or colonization credit and can be expected to lose or gain species in the future. However, extinction debts and colonization credits are difficult to detect and their actual magnitudes or payments have rarely been quantified because species richness patterns and dynamics are also shaped by recent environmental conditions and recent environmental changes. In this thesis we aimed to determine patterns of herb-layer species richness and recent species richness dynamics of forest herb layer plants and link those patterns and dynamics to historical land cover changes and associated land use legacies. The study was conducted in the Prignitz, NE-Germany, where the forest distribution remained stable for the last ca. 100 years but where a) the deciduous forest area had declined by more than 90 per cent (leaving only remnants of "ancient forests"), b) small new forests had been established on former agricultural land ("post-agricultural forests"). Here, we analyzed the relative importance of land use history and associated historical land cover changes for herb layer species richness compared to recent environmental factors and determined magnitudes of extinction debt and colonization credit and their payment in ancient and post-agricultural forests, respectively. We showed that present-day species richness patterns were still shaped by historical land cover changes that ranged back to more than a century. Although recent environmental conditions were largely comparable we found significantly more forest specialists, species with short-distance dispersal capabilities and clonals in ancient forests than in post-agricultural forests. Those species richness differences were largely contingent to a colonization credit in post-agricultural forests that ranged up to 9 species (average 4.7), while the extinction debt in ancient forests had almost completely been paid. Environmental legacies from historical agricultural land use played a minor role for species richness differences. Instead, patch connectivity was most important. Species richness in ancient forests was still dependent on historical connectivity, indicating a last glimpse of an extinction debt, and the colonization credit was highest in isolated post-agricultural forests. In post-agricultural forests that were better connected or directly adjacent to ancient forest patches the colonization credit was way smaller and we were able to verify a gradual payment of the colonization credit from 2.7 species to 1.5 species over the last six decades.}, language = {en} } @phdthesis{Perlich2019, author = {Perlich, Anja}, title = {Digital collaborative documentation in mental healthcare}, doi = {10.25932/publishup-44029}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440292}, school = {Universit{\"a}t Potsdam}, pages = {x, 135}, year = {2019}, abstract = {With the growth of information technology, patient attitudes are shifting - away from passively receiving care towards actively taking responsibility for their well- being. Handling doctor-patient relationships collaboratively and providing patients access to their health information are crucial steps in empowering patients. In mental healthcare, the implicit consensus amongst practitioners has been that sharing medical records with patients may have an unpredictable, harmful impact on clinical practice. In order to involve patients more actively in mental healthcare processes, Tele-Board MED (TBM) allows for digital collaborative documentation in therapist-patient sessions. The TBM software system offers a whiteboard-inspired graphical user interface that allows therapist and patient to jointly take notes during the treatment session. Furthermore, it provides features to automatically reuse the digital treatment session notes for the creation of treatment session summaries and clinical case reports. This thesis presents the development of the TBM system and evaluates its effects on 1) the fulfillment of the therapist's duties of clinical case documentation, 2) patient engagement in care processes, and 3) the therapist-patient relationship. Following the design research methodology, TBM was developed and tested in multiple evaluation studies in the domains of cognitive behavioral psychotherapy and addiction care. The results show that therapists are likely to use TBM with patients if they have a technology-friendly attitude and when its use suits the treatment context. Support in carrying out documentation duties as well as fulfilling legal requirements contributes to therapist acceptance. Furthermore, therapists value TBM as a tool to provide a discussion framework and quick access to worksheets during treatment sessions. Therapists express skepticism, however, regarding technology use in patient sessions and towards complete record transparency in general. Patients expect TBM to improve the communication with their therapist and to offer a better recall of discussed topics when taking a copy of their notes home after the session. Patients are doubtful regarding a possible distraction of the therapist and usage in situations when relationship-building is crucial. When applied in a clinical environment, collaborative note-taking with TBM encourages patient engagement and a team feeling between therapist and patient. Furthermore, it increases the patient's acceptance of their diagnosis, which in turn is an important predictor for therapy success. In summary, TBM has a high potential to deliver more than documentation support and record transparency for patients, but also to contribute to a collaborative doctor-patient relationship. This thesis provides design implications for the development of digital collaborative documentation systems in (mental) healthcare as well as recommendations for a successful implementation in clinical practice.}, language = {en} } @phdthesis{Nikaj2019, author = {Nikaj, Adriatik}, title = {Restful choreographies}, doi = {10.25932/publishup-43890}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-438903}, school = {Universit{\"a}t Potsdam}, pages = {xix, 146}, year = {2019}, abstract = {Business process management has become a key instrument to organize work as many companies represent their operations in business process models. Recently, business process choreography diagrams have been introduced as part of the Business Process Model and Notation standard to represent interactions between business processes, run by different partners. When it comes to the interactions between services on the Web, Representational State Transfer (REST) is one of the primary architectural styles employed by web services today. Ideally, the RESTful interactions between participants should implement the interactions defined at the business choreography level. The problem, however, is the conceptual gap between the business process choreography diagrams and RESTful interactions. Choreography diagrams, on the one hand, are modeled from business domain experts with the purpose of capturing, communicating and, ideally, driving the business interactions. RESTful interactions, on the other hand, depend on RESTful interfaces that are designed by web engineers with the purpose of facilitating the interaction between participants on the internet. In most cases however, business domain experts are unaware of the technology behind web service interfaces and web engineers tend to overlook the overall business goals of web services. While there is considerable work on using process models during process implementation, there is little work on using choreography models to implement interactions between business processes. This thesis addresses this research gap by raising the following research question: How to close the conceptual gap between business process choreographies and RESTful interactions? This thesis offers several research contributions that jointly answer the research question. The main research contribution is the design of a language that captures RESTful interactions between participants---RESTful choreography modeling language. Formal completeness properties (with respect to REST) are introduced to validate its instances, called RESTful choreographies. A systematic semi-automatic method for deriving RESTful choreographies from business process choreographies is proposed. The method employs natural language processing techniques to translate business interactions into RESTful interactions. The effectiveness of the approach is shown by developing a prototypical tool that evaluates the derivation method over a large number of choreography models. In addition, the thesis proposes solutions towards implementing RESTful choreographies. In particular, two RESTful service specifications are introduced for aiding, respectively, the execution of choreographies' exclusive gateways and the guidance of RESTful interactions.}, language = {en} } @phdthesis{Lewandowski2019, author = {Lewandowski, Max}, title = {Hadamard states for bosonic quantum field theory on globally hyperbolic spacetimes}, doi = {10.25932/publishup-43938}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439381}, school = {Universit{\"a}t Potsdam}, pages = {v, 69}, year = {2019}, abstract = {Quantenfeldtheorie auf gekr{\"u}mmten Raumzeiten ist eine semiklassische N{\"a}herung einer Quantentheorie der Gravitation, im Rahmen derer ein Quantenfeld unter dem Einfluss eines klassisch modellierten Gravitationsfeldes, also einer gekr{\"u}mmten Raumzeit, beschrieben wird. Eine der bemerkenswertesten Vorhersagen dieses Ansatzes ist die Erzeugung von Teilchen durch die gekr{\"u}mmte Raumzeit selbst, wie zum Beispiel durch Hawkings Verdampfen schwarzer L{\"o}cher und den Unruh Effekt. Andererseits deuten diese Aspekte bereits an, dass fundamentale Grundpfeiler der Theorie auf dem Minkowskiraum, insbesondere ein ausgezeichneter Vakuumzustand und damit verbunden der Teilchenbegriff, f{\"u}r allgemeine gekr{\"u}mmte Raumzeiten keine sinnvolle Entsprechung besitzen. Gleichermaßen ben{\"o}tigen wir eine alternative Implementierung von Kovarianz in die Theorie, da gekr{\"u}mmte Raumzeiten im Allgemeinen keine nicht-triviale globale Symmetrie aufweisen. Letztere Problematik konnte im Rahmen lokal-kovarianter Quantenfeldtheorie gel{\"o}st werden, wohingegen die Abwesenheit entsprechender Konzepte f{\"u}r Vakuum und Teilchen in diesem allgemeinen Fall inzwischen sogar in Form von no-go-Aussagen manifestiert wurde. Beim algebraischen Ansatz f{\"u}r eine Quantenfeldtheorie werden zun{\"a}chst Observablen eingef{\"u}hrt und erst anschließend Zust{\"a}nde via Zuordnung von Erwartungswerten. Obwohl die Observablen unter physikalischen Gesichtspunkten konstruiert werden, existiert dennoch eine große Anzahl von m{\"o}glichen Zust{\"a}nden, von denen viele, aus physikalischen Blickwinkeln betrachtet, nicht sinnvoll sind. Dieses Konzept von Zust{\"a}nden ist daher noch zu allgemein und bedarf weiterer physikalisch motivierter Einschr{\"a}nkungen. Beispielsweise ist es nat{\"u}rlich, sich im Falle freier Quantenfeldtheorien mit linearen Feldgleichungen auf quasifreie Zust{\"a}nde zu konzentrieren. Dar{\"u}ber hinaus ist die Renormierung von Erwartungswerten f{\"u}r Produkte von Feldern von zentraler Bedeutung. Dies betrifft insbesondere den Energie-Impuls-Tensor, dessen Erwartungswert durch distributionelle Bil{\"o}sungen der Feldgleichungen gegeben ist. Tats{\"a}chlich liefert J. Hadamard Theorie hyperbolischer Differentialgleichungen Bil{\"o}sungen mit festem singul{\"a}ren Anteil, so dass ein geeignetes Renormierungsverfahren definiert werden kann. Die sogenannte Hadamard-Bedingung an Bidistributionen steht f{\"u}r die Forderung einer solchen Singularit{\"a}tenstruktur und sie hat sich etabliert als nat{\"u}rliche Verallgemeinerung der f{\"u}r flache Raumzeiten formulierten Spektralbedingung. Seit Radzikowskis wegweisenden Resultaten l{\"a}sst sie sich außerdem lokal ausdr{\"u}cken, n{\"a}mlich als eine Bedingung an die Wellenfrontenmenge der Bil{\"o}sung. Diese Formulierung schl{\"a}gt eine Br{\"u}cke zu der von Duistermaat und H{\"o}rmander entwickelten mikrolokalen Analysis, die seitdem bei der {\"U}berpr{\"u}fung der Hadamard-Bedingung sowie der Konstruktion von Hadamard Zust{\"a}nden vielfach Verwendung findet und rasante Fortschritte auf diesem Gebiet ausgel{\"o}st hat. Obwohl unverzichtbar f{\"u}r die Analyse der Charakteristiken von Operatoren und ihrer Parametrizen sind die Methoden und Aussagen der mikrolokalen Analysis ungeeignet f{\"u}r die Analyse von nicht-singul{\"a}ren Strukturen und zentrale Aussagen sind typischerweise bis auf glatte Anteile formuliert. Beispielsweise lassen sich aus Radzikowskis Resultaten nahezu direkt Existenzaussagen und sogar ein konkretes Konstruktionsschema f{\"u}r Hadamard Zust{\"a}nde ableiten, die {\"u}brigen Eigenschaften (Bil{\"o}sung, Kausalit{\"a}t, Positivit{\"a}t) k{\"o}nnen jedoch auf diesem Wege nur modulo glatte Funktionen gezeigt werden. Es ist das Ziel dieser Dissertation, diesen Ansatz f{\"u}r lineare Wellenoperatoren auf Schnitten in Vektorb{\"u}ndeln {\"u}ber global-hyperbolischen Lorentz-Mannigfaltigkeiten zu vollenden und, ausgehend von einer lokalen Hadamard Reihe, Hadamard Zust{\"a}nde zu konstruieren. Beruhend auf Wightmans L{\"o}sung f{\"u}r die d'Alembert-Gleichung auf dem Minkowski-Raum und der Herleitung der avancierten und retardierten Fundamentall{\"o}sung konstruieren wir lokal Parametrizen in Form von Hadamard-Reihen und f{\"u}gen sie zu globalen Bil{\"o}sungen zusammen. Diese besitzen dann die Hadamard-Eigenschaft und wir zeigen anschließend, dass glatte Bischnitte existieren, die addiert werden k{\"o}nnen, so dass die verbleibenden Bedingungen erf{\"u}llt sind.}, language = {en} } @phdthesis{Schaefer2019, author = {Sch{\"a}fer, Merlin}, title = {Understanding and predicting global change impacts on migratory birds}, doi = {10.25932/publishup-43925}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439256}, school = {Universit{\"a}t Potsdam}, pages = {XIV, 153}, year = {2019}, abstract = {This is a publication-based dissertation comprising three original research stud-ies (one published, one submitted and one ready for submission; status March 2019). The dissertation introduces a generic computer model as a tool to investigate the behaviour and population dynamics of animals in cyclic environments. The model is further employed for analysing how migratory birds respond to various scenarios of altered food supply under global change. Here, ecological and evolutionary time-scales are considered, as well as the biological constraints and trade-offs the individual faces, which ultimately shape response dynamics at the population level. Further, the effect of fine-scale temporal patterns in re-source supply are studied, which is challenging to achieve experimentally. My findings predict population declines, altered behavioural timing and negative carry-over effects arising in migratory birds under global change. They thus stress the need for intensified research on how ecological mechanisms are affected by global change and for effective conservation measures for migratory birds. The open-source modelling software created for this dissertation can now be used for other taxa and related research questions. Overall, this thesis improves our mechanistic understanding of the impacts of global change on migratory birds as one prerequisite to comprehend ongoing global biodiversity loss. The research results are discussed in a broader ecological and scientific context in a concluding synthesis chapter.}, language = {en} } @phdthesis{Krentz2019, author = {Krentz, Konrad-Felix}, title = {A Denial-of-Sleep-Resilient Medium Access Control Layer for IEEE 802.15.4 Networks}, doi = {10.25932/publishup-43930}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439301}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 187}, year = {2019}, abstract = {With the emergence of the Internet of things (IoT), plenty of battery-powered and energy-harvesting devices are being deployed to fulfill sensing and actuation tasks in a variety of application areas, such as smart homes, precision agriculture, smart cities, and industrial automation. In this context, a critical issue is that of denial-of-sleep attacks. Such attacks temporarily or permanently deprive battery-powered, energy-harvesting, or otherwise energy-constrained devices of entering energy-saving sleep modes, thereby draining their charge. At the very least, a successful denial-of-sleep attack causes a long outage of the victim device. Moreover, to put battery-powered devices back into operation, their batteries have to be replaced. This is tedious and may even be infeasible, e.g., if a battery-powered device is deployed at an inaccessible location. While the research community came up with numerous defenses against denial-of-sleep attacks, most present-day IoT protocols include no denial-of-sleep defenses at all, presumably due to a lack of awareness and unsolved integration problems. After all, despite there are many denial-of-sleep defenses, effective defenses against certain kinds of denial-of-sleep attacks are yet to be found. The overall contribution of this dissertation is to propose a denial-of-sleep-resilient medium access control (MAC) layer for IoT devices that communicate over IEEE 802.15.4 links. Internally, our MAC layer comprises two main components. The first main component is a denial-of-sleep-resilient protocol for establishing session keys among neighboring IEEE 802.15.4 nodes. The established session keys serve the dual purpose of implementing (i) basic wireless security and (ii) complementary denial-of-sleep defenses that belong to the second main component. The second main component is a denial-of-sleep-resilient MAC protocol. Notably, this MAC protocol not only incorporates novel denial-of-sleep defenses, but also state-of-the-art mechanisms for achieving low energy consumption, high throughput, and high delivery ratios. Altogether, our MAC layer resists, or at least greatly mitigates, all denial-of-sleep attacks against it we are aware of. Furthermore, our MAC layer is self-contained and thus can act as a drop-in replacement for IEEE 802.15.4-compliant MAC layers. In fact, we implemented our MAC layer in the Contiki-NG operating system, where it seamlessly integrates into an existing protocol stack.}, language = {en} } @phdthesis{Zapata2019, author = {Zapata, Sebastian Henao}, title = {Paleozoic to Pliocene evolution of the Andean retroarc between 26 and 28°S: interactions between tectonics, climate, and upper plate architecture}, doi = {10.25932/publishup-43903}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439036}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2019}, abstract = {Interactions and feedbacks between tectonics, climate, and upper plate architecture control basin geometry, relief, and depositional systems. The Andes is part of a longlived continental margin characterized by multiple tectonic cycles which have strongly modified the Andean upper plate architecture. In the Andean retroarc, spatiotemporal variations in the structure of the upper plate and tectonic regimes have resulted in marked along-strike variations in basin geometry, stratigraphy, deformational style, and mountain belt morphology. These along-strike variations include high-elevation plateaus (Altiplano and Puna) associated with a thin-skin fold-and-thrust-belt and thick-skin deformation in broken foreland basins such as the Santa Barbara system and the Sierras Pampeanas. At the confluence of the Puna Plateau, the Santa Barbara system and the Sierras Pampeanas, major along-strike changes in upper plate architecture, mountain belt morphology, basement exhumation, and deformation style can be recognized. I have used a source to sink approach to unravel the spatiotemporal tectonic evolution of the Andean retroarc between 26 and 28°S. I obtained a large low-temperature thermochronology data set from basement units which includes apatite fission track, apatite U-Th-Sm/He, and zircon U-Th/He (ZHe) cooling ages. Stratigraphic descriptions of Miocene units were temporally constrained by U-Pb LA-ICP-MS zircon ages from interbedded pyroclastic material. Modeled ZHe ages suggest that the basement of the study area was exhumed during the Famatinian orogeny (550-450 Ma), followed by a period of relative tectonic quiescence during the Paleozoic and the Triassic. The basement experienced horst exhumation during the Cretaceous development of the Salta rift. After initial exhumation, deposition of thick Cretaceous syn-rift strata caused reheating of several basement blocks within the Santa Barbara system. During the Eocene-Oligocene, the Andean compressional setting was responsible for the exhumation of several disconnected basement blocks. These exhumed blocks were separated by areas of low relief, in which humid climate and low erosion rates facilitated the development of etchplains on the crystalline basement. The exhumed basement blocks formed an Eocene to Oligocene broken foreland basin in the back-bulge depozone of the Andean foreland. During the Early Miocene, foreland basin strata filled up the preexisting Paleogene topography. The basement blocks in lower relief positions were reheated; associated geothermal gradients were higher than 25°C/km. Miocene volcanism was responsible for lateral variations on the amount of reheating along the Campo-Arenal basin. Around 12 Ma, a new deformational phase modified the drainage network and fragmented the lacustrine system. As deformation and rock uplift continued, the easily eroded sedimentary cover was efficiently removed and reworked by an ephemeral fluvial system, preventing the development of significant relief. After ~6 Ma, the low erodibility of the basement blocks which began to be exposed caused relief increase, leading to the development of stable fluvial systems. Progressive relief development modified atmospheric circulation, creating a rainfall gradient. After 3 Ma, orographic rainfall and high relief lead to the development of proximal fluvial-gravitational depositional systems in the surrounding basins.}, language = {en} } @phdthesis{Sidarenka2019, author = {Sidarenka, Uladzimir}, title = {Sentiment analysis of German Twitter}, doi = {10.25932/publishup-43742}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437422}, school = {Universit{\"a}t Potsdam}, pages = {vii, 217}, year = {2019}, abstract = {The immense popularity of online communication services in the last decade has not only upended our lives (with news spreading like wildfire on the Web, presidents announcing their decisions on Twitter, and the outcome of political elections being determined on Facebook) but also dramatically increased the amount of data exchanged on these platforms. Therefore, if we wish to understand the needs of modern society better and want to protect it from new threats, we urgently need more robust, higher-quality natural language processing (NLP) applications that can recognize such necessities and menaces automatically, by analyzing uncensored texts. Unfortunately, most NLP programs today have been created for standard language, as we know it from newspapers, or, in the best case, adapted to the specifics of English social media. This thesis reduces the existing deficit by entering the new frontier of German online communication and addressing one of its most prolific forms—users' conversations on Twitter. In particular, it explores the ways and means by how people express their opinions on this service, examines current approaches to automatic mining of these feelings, and proposes novel methods, which outperform state-of-the-art techniques. For this purpose, I introduce a new corpus of German tweets that have been manually annotated with sentiments, their targets and holders, as well as lexical polarity items and their contextual modifiers. Using these data, I explore four major areas of sentiment research: (i) generation of sentiment lexicons, (ii) fine-grained opinion mining, (iii) message-level polarity classification, and (iv) discourse-aware sentiment analysis. In the first task, I compare three popular groups of lexicon generation methods: dictionary-, corpus-, and word-embedding-based ones, finding that dictionary-based systems generally yield better polarity lists than the last two groups. Apart from this, I propose a linear projection algorithm, whose results surpass many existing automatically-generated lexicons. Afterwords, in the second task, I examine two common approaches to automatic prediction of sentiment spans, their sources, and targets: conditional random fields (CRFs) and recurrent neural networks, obtaining higher scores with the former model and improving these results even further by redefining the structure of CRF graphs. When dealing with message-level polarity classification, I juxtapose three major sentiment paradigms: lexicon-, machine-learning-, and deep-learning-based systems, and try to unite the first and last of these method groups by introducing a bidirectional neural network with lexicon-based attention. Finally, in order to make the new classifier aware of microblogs' discourse structure, I let it separately analyze the elementary discourse units of each tweet and infer the overall polarity of a message from the scores of its EDUs with the help of two new approaches: latent-marginalized CRFs and Recursive Dirichlet Process.}, language = {en} } @phdthesis{MarimonTarter2019, author = {Marimon Tarter, Mireia}, title = {Word segmentation in German-learning infants and German-speaking adults}, doi = {10.25932/publishup-43740}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437400}, school = {Universit{\"a}t Potsdam}, pages = {132}, year = {2019}, abstract = {There is evidence that infants start extracting words from fluent speech around 7.5 months of age (e.g., Jusczyk \& Aslin, 1995) and that they use at least two mechanisms to segment words forms from fluent speech: prosodic information (e.g., Jusczyk, Cutler \& Redanz, 1993) and statistical information (e.g., Saffran, Aslin \& Newport, 1996). However, how these two mechanisms interact and whether they change during development is still not fully understood. The main aim of the present work is to understand in what way different cues to word segmentation are exploited by infants when learning the language in their environment, as well as to explore whether this ability is related to later language skills. In Chapter 3 we pursued to determine the reliability of the method used in most of the experiments in the present thesis (the Headturn Preference Procedure), as well as to examine correlations and individual differences between infants' performance and later language outcomes. In Chapter 4 we investigated how German-speaking adults weigh statistical and prosodic information for word segmentation. We familiarized adults with an auditory string in which statistical and prosodic information indicated different word boundaries and obtained both behavioral and pupillometry responses. Then, we conducted further experiments to understand in what way different cues to word segmentation are exploited by 9-month-old German-learning infants (Chapter 5) and by 6-month-old German-learning infants (Chapter 6). In addition, we conducted follow-up questionnaires with the infants and obtained language outcomes at later stages of development. Our findings from this thesis revealed that (1) German-speaking adults show a strong weight of prosodic cues, at least for the materials used in this study and that (2) German-learning infants weight these two kind of cues differently depending on age and/or language experience. We observed that, unlike English-learning infants, 6-month-old infants relied more strongly on prosodic cues. Nine-month-olds do not show any preference for either of the cues in the word segmentation task. From the present results it remains unclear whether the ability to use prosodic cues to word segmentation relates to later language vocabulary. We speculate that prosody provides infants with their first window into the specific acoustic regularities in the signal, which enables them to master the specific stress pattern of German rapidly. Our findings are a step forwards in the understanding of an early impact of the native prosody compared to statistical learning in early word segmentation.}, language = {en} } @phdthesis{LozadaGobilard2019, author = {Lozada Gobilard, Sissi Donna}, title = {From genes to communities: Assessing plant diversity and connectivity in kettle holes as metaecosystems in agricultural landscapes}, doi = {10.25932/publishup-43768}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437684}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 147}, year = {2019}, abstract = {Species assembly from a regional pool into local metacommunities and how they colonize and coexist over time and space is essential to understand how communities response to their environment including abiotic and biotic factors. In highly disturbed landscapes, connectivity of isolated habitat patches is essential to maintain biodiversity and the entire ecosystem functioning. In northeast Germany, a high density of the small water bodies called kettle holes, are good systems to study metacommunities due to their condition as "aquatic islands" suitable for hygrophilous species that are surrounded by in unsuitable matrix of crop fields. The main objective of this thesis was to infer the main ecological processes shaping plant communities and their response to the environment, from biodiversity patterns and key life-history traits involved in connectivity using ecological and genetic approaches; and to provide first insights of the role of kettle holes harboring wild-bee species as important mobile linkers connecting plant communities in this insular system. t a community level, I compared plant diversity patterns and trait composition in ephemeral vs. permanent kettle holes). My results showed that types of kettle holes act as environmental filers shaping plant diversity, community-composition and trait-distribution, suggesting species sorting and niche processes in both types of kettle holes. At a population level, I further analyzed the role of dispersal and reproductive strategies of four selected species occurring in permanent kettle holes. Using microsatellites, I found that breeding system (degree of clonality), is the main factor shaping genetic diversity and genetic divergence. Although, higher gene flow and lower genetic differentiation among populations in wind vs. insect pollinated species was also found, suggesting that dispersal mechanisms played a role related to gene flow and connectivity. For most flowering plants, pollinators play an important role connecting communities. Therefore, as a first insight of the potential mobile linkers of these plant communities, I investigated the diversity wild-bees occurring in these kettle holes. My main results showed that local habitat quality (flower resources) had a positive effect on bee diversity, while habitat heterogeneity (number of natural landscape elements surrounding kettle holes 100-300m), was negatively correlated. This thesis covers from genetic flow at individual and population level to plant community assembly. My results showed how patterns of biodiversity, dispersal and reproduction strategies in plant population and communities can be used to infer ecological processes. In addition, I showed the importance of life-history traits and the relationship between species and their abiotic and biotic interactions. Furthermore, I included a different level of mobile linkers (pollinators) for a better understanding of another level of the system. This integration is essential to understand how communities respond to their surrounding environment and how disturbances such as agriculture, land-use and climate change might affect them. I highlight the need to integrate many scientific areas covering from genes to ecosystems at different spatiotemporal scales for a better understanding, management and conservation of our ecosystems.}, language = {en} } @phdthesis{Brase2019, author = {Brase, Alexa Kristin}, title = {Spiele um Studium und Lehre? Zur mikropolitischen Nutzung von Qualit{\"a}tsmanagementsystemen an Hochschulen in Deutschland}, doi = {10.25932/publishup-43737}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437377}, school = {Universit{\"a}t Potsdam}, pages = {IX, 228}, year = {2019}, abstract = {Die Wissenschaftsfreiheit ist ein Grundrecht, dessen Sinn und Auslegung im Rahmen von Reformen des Hochschulsystems nicht nur der Justiz, sondern auch der Wissenschaft selbst immer wieder Anlass zur Diskussion geben, so auch im Zuge der Einf{\"u}hrung des so genannten Qualit{\"a}tsmanagements von Studium und Lehre an deutschen Hochschulen. Die vorliegende Dissertationsschrift stellt die Ergebnisse einer empirischen Studie vor, die mit einer soziologischen Betrachtung des Qualit{\"a}tsmanagements unterschiedlicher Hochschulen zu dieser Diskussion beitr{\"a}gt. Auf Grundlage der Pr{\"a}misse, dass Verlauf und Folgen einer organisationalen Innovation nur verstanden werden k{\"o}nnen, wenn der allt{\"a}gliche Umgang der Organisationsmitglieder mit den neuen Strukturen und Prozessen in die Analyse einbezogen wird, geht die Studie von der Frage aus, wie Akteurinnen und Akteure an deutschen Hochschulen die Qualit{\"a}tsmanagementsysteme ihrer Organisationen nutzen. Die qualitative inhaltsanalytische Auswertung von 26 Leitfaden-Interviews mit Prorektorinnen und -rektoren, Qualit{\"a}tsmanagement-Personal und Studiendekaninnen und -dekanen an neun Hochschulen ergibt, dass die Strategien der Akteursgruppen an den Hochschulen im Zusammenspiel mit strukturellen Aspekten unterschiedliche Dynamiken entstehen lassen, mit denen Implikationen f{\"u}r die Lehrfreiheit verbunden sind: W{\"a}hrend die Autonomie der Lehrenden durch das Qualit{\"a}tsmanagement an einigen Hochschulen unterst{\"u}tzt wird, sind sowohl Autonomie als auch Verantwortung f{\"u}r Studium und Lehre an anderen Hochschulen Gegenstand andauernder Konflikte, die auch das Qualit{\"a}tsmanagement einschließen.}, language = {de} } @phdthesis{Numberger2019, author = {Numberger, Daniela}, title = {Urban wastewater and lakes as habitats for bacteria and potential vectors for pathogens}, doi = {10.25932/publishup-43709}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437095}, school = {Universit{\"a}t Potsdam}, pages = {VI, 130}, year = {2019}, abstract = {Wasser ist lebensnotwendig und somit eine essentielle Ressource. Jedoch sind unsere S{\"u}ßwasser-Ressourcen begrenzt und ihre Erhaltung daher besonders wichtig. Verschmutzungen mit Chemikalien und Krankheitserregern, die mit einer wachsenden Bev{\"o}lkerung und Urbanisierung einhergehen, verschlechtern die Qualit{\"a}t unseres S{\"u}ßwassers. Außerdem kann Wasser als {\"U}bertragungsvektor f{\"u}r Krankheitserreger dienen und daher wasserb{\"u}rtige Krankheiten verursachen. Der Leibniz-Forschungsverbund INFECTIONS'21 untersuchte innerhalb der interdisziplin{\"a}ren Forschungsgruppe III - „Wasser", Gew{\"a}sser als zentralen Mittelpunkt f{\"u}r Krankheiterreger. Dabei konzentrierte man sich auf Clostridioides difficile sowie avi{\"a}re Influenza A-Viren, von denen angenommen wird, dass sie in die Gew{\"a}sser ausgeschieden werden. Ein weiteres Ziel bestand darin, die bakterielle Gemeinschaften eines Kl{\"a}rwerkes der deutschen Hauptstadt Berlin zu charakterisieren, um anschließend eine Bewertung des potentiellen Gesundheitsrisikos geben zu k{\"o}nnen. Bakterielle Gemeinschaften des Roh- und Klarwassers aus dem Kl{\"a}rwerk unterschieden sich signifikant voneinander. Der Anteil an Darm-/F{\"a}kalbakterien war relativ niedrig und potentielle Darmpathogene wurden gr{\"o}ßtenteils aus dem Rohwasser entfernt. Ein potentielles Gesundheitsrisiko konnte allerdings von potentiell pathogenen Legionellen wie L. lytica festgestellt werden, deren relative Abundanz im Klarwasser h{\"o}her war als im Rohwasser. Es wurden außerdem drei C. difficile-Isolate aus den Kl{\"a}rwerk-Rohwasser und einem st{\"a}dtischen Badesee in Berlin (Weisser See) gewonnen und sequenziert. Die beiden Isolate aus dem Kl{\"a}rwerk tragen keine Toxin-Gene, wohingegen das Isolat aus dem See Toxin-Gene besitzt. Alle drei Isolate sind sehr nah mit humanen St{\"a}mmen verwandt. Dies deutet auf ein potentielles, wenn auch sporadisches Gesundheitsrisiko hin. (Avi{\"a}re) Influenza A-Viren wurden in 38.8\% der untersuchten Sedimentproben mittels PCR detektiert, aber die Virusisolierung schlug fehl. Ein Experiment mit beimpften Wasser- und Sedimentproben zeigte, dass f{\"u}r die Isolierung aus Sedimentproben eine relativ hohe Viruskonzentration n{\"o}tig ist. In Wasserproben ist jedoch ein niedriger Titer an Influenza A-Viren ausreichend, um eine Infektion auszul{\"o}sen. Es konnte zudem auch festgestellt werden, dass sich „Madin-Darby Canine Kidney (MDCK)―-Zellkulturen im Gegensatz zu embryonierten H{\"u}hnereiern besser eignen, um Influenza A-Viren aus Sediment zu isolieren. Zusammenfassend l{\"a}sst sich sagen, dass diese Arbeit m{\"o}gliche Gesundheitsrisiken aufgedeckt hat, wie etwa durch Legionellen im untersuchten Berliner Kl{\"a}rwerk, deren relative Abundanz in gekl{\"a}rtem Abwasser h{\"o}her ist als im Rohwasser. Desweiteren wird indiziert, dass Abwasser und Gew{\"a}sser als Reservoir und Vektor f{\"u}r pathogene Organismen dienen k{\"o}nnen, selbst f{\"u}r nicht-typische Wasser-Pathogene wie C. difficile.}, language = {en} } @phdthesis{Thater2019, author = {Thater, Sabine}, title = {The interplay between supermassive black holes and their host galaxies}, doi = {10.25932/publishup-43757}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437570}, school = {Universit{\"a}t Potsdam}, pages = {iv, 186}, year = {2019}, abstract = {Supermassive black holes reside in the hearts of almost all massive galaxies. Their evolutionary path seems to be strongly linked to the evolution of their host galaxies, as implied by several empirical relations between the black hole mass (M BH ) and different host galaxy properties. The physical driver of this co-evolution is, however, still not understood. More mass measurements over homogeneous samples and a detailed understanding of systematic uncertainties are required to fathom the origin of the scaling relations. In this thesis, I present the mass estimations of supermassive black holes in the nuclei of one late-type and thirteen early-type galaxies. Our SMASHING sample extends from the intermediate to the massive galaxy mass regime and was selected to fill in gaps in number of galaxies along the scaling relations. All galaxies were observed at high spatial resolution, making use of the adaptive-optics mode of integral field unit (IFU) instruments on state-of-the-art telescopes (SINFONI, NIFS, MUSE). I extracted the stellar kinematics from these observations and constructed dynamical Jeans and Schwarzschild models to estimate the mass of the central black holes robustly. My new mass estimates increase the number of early-type galaxies with measured black hole masses by 15\%. The seven measured galaxies with nuclear light deficits ('cores') augment the sample of cored galaxies with measured black holes by 40\%. Next to determining massive black hole masses, evaluating the accuracy of black hole masses is crucial for understanding the intrinsic scatter of the black hole- host galaxy scaling relations. I tested various sources of systematic uncertainty on my derived mass estimates. The M BH estimate of the single late-type galaxy of the sample yielded an upper limit, which I could constrain very robustly. I tested the effects of dust, mass-to-light ratio (M/L) variation, and dark matter on my measured M BH . Based on these tests, the typically assumed constant M/L ratio can be an adequate assumption to account for the small amounts of dark matter in the center of that galaxy. I also tested the effect of a variable M/L variation on the M BH measurement on a second galaxy. By considering stellar M/L variations in the dynamical modeling, the measured M BH decreased by 30\%. In the future, this test should be performed on additional galaxies to learn how an as constant assumed M/L flaws the estimated black hole masses. Based on our upper limit mass measurement, I confirm previous suggestions that resolving the predicted BH sphere-of-influence is not a strict condition to measure black hole masses. Instead, it is only a rough guide for the detection of the black hole if high-quality, and high signal-to-noise IFU data are used for the measurement. About half of our sample consists of massive early-type galaxies which show nuclear surface brightness cores and signs of triaxiality. While these types of galaxies are typically modeled with axisymmetric modeling methods, the effects on M BH are not well studied yet. The massive galaxies of our presented galaxy sample are well suited to test the effect of different stellar dynamical models on the measured black hole mass in evidently triaxial galaxies. I have compared spherical Jeans and axisymmetric Schwarzschild models and will add triaxial Schwarzschild models to this comparison in the future. The constructed Jeans and Schwarzschild models mostly disagree with each other and cannot reproduce many of the triaxial features of the galaxies (e.g., nuclear sub-components, prolate rotation). The consequence of the axisymmetric-triaxial assumption on the accuracy of M BH and its impact on the black hole - host galaxy relation needs to be carefully examined in the future. In the sample of galaxies with published M BH , we find measurements based on different dynamical tracers, requiring different observations, assumptions, and methods. Crucially, different tracers do not always give consistent results. I have used two independent tracers (cold molecular gas and stars) to estimate M BH in a regular galaxy of our sample. While the two estimates are consistent within their errors, the stellar-based measurement is twice as high as the gas-based. Similar trends have also been found in the literature. Therefore, a rigorous test of the systematics associated with the different modeling methods is required in the future. I caution to take the effects of different tracers (and methods) into account when discussing the scaling relations. I conclude this thesis by comparing my galaxy sample with the compilation of galaxies with measured black holes from the literature, also adding six SMASHING galaxies, which were published outside of this thesis. None of the SMASHING galaxies deviates significantly from the literature measurements. Their inclusion to the published early-type galaxies causes a change towards a shallower slope for the M BH - effective velocity dispersion relation, which is mainly driven by the massive galaxies of our sample. More unbiased and homogenous measurements are needed in the future to determine the shape of the relation and understand its physical origin.}, language = {en} } @phdthesis{Batoulis2019, author = {Batoulis, Kimon}, title = {Sound integration of process and decision models}, doi = {10.25932/publishup-43738}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437386}, school = {Universit{\"a}t Potsdam}, pages = {xviii, 155}, year = {2019}, abstract = {Business process management is an established technique for business organizations to manage and support their processes. Those processes are typically represented by graphical models designed with modeling languages, such as the Business Process Model and Notation (BPMN). Since process models do not only serve the purpose of documentation but are also a basis for implementation and automation of the processes, they have to satisfy certain correctness requirements. In this regard, the notion of soundness of workflow nets was developed, that can be applied to BPMN process models in order to verify their correctness. Because the original soundness criteria are very restrictive regarding the behavior of the model, different variants of the soundness notion have been developed for situations in which certain violations are not even harmful. All of those notions do only consider the control-flow structure of a process model, however. This poses a problem, taking into account the fact that with the recent release and the ongoing development of the Decision Model and Notation (DMN) standard, an increasing number of process models are complemented by respective decision models. DMN is a dedicated modeling language for decision logic and separates the concerns of process and decision logic into two different models, process and decision models respectively. Hence, this thesis is concerned with the development of decisionaware soundness notions, i.e., notions of soundness that build upon the original soundness ideas for process models, but additionally take into account complementary decision models. Similar to the various notions of workflow net soundness, this thesis investigates different notions of decision soundness that can be applied depending on the desired degree of restrictiveness. Since decision tables are a standardized means of DMN to represent decision logic, this thesis also puts special focus on decision tables, discussing how they can be translated into an unambiguous format and how their possible output values can be efficiently determined. Moreover, a prototypical implementation is described that supports checking a basic version of decision soundness. The decision soundness notions were also empirically evaluated on models from participants of an online course on process and decision modeling as well as from a process management project of a large insurance company. The evaluation demonstrates that violations of decision soundness indeed occur and can be detected with our approach.}, language = {en} } @phdthesis{Veh2019, author = {Veh, Georg}, title = {Outburst floods from moraine-dammed lakes in the Himalayas}, doi = {10.25932/publishup-43607}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436071}, school = {Universit{\"a}t Potsdam}, pages = {124}, year = {2019}, abstract = {The Himalayas are a region that is most dependent, but also frequently prone to hazards from changing meltwater resources. This mountain belt hosts the highest mountain peaks on earth, has the largest reserve of ice outside the polar regions, and is home to a rapidly growing population in recent decades. One source of hazard has attracted scientific research in particular in the past two decades: glacial lake outburst floods (GLOFs) occurred rarely, but mostly with fatal and catastrophic consequences for downstream communities and infrastructure. Such GLOFs can suddenly release several million cubic meters of water from naturally impounded meltwater lakes. Glacial lakes have grown in number and size by ongoing glacial mass losses in the Himalayas. Theory holds that enhanced meltwater production may increase GLOF frequency, but has never been tested so far. The key challenge to test this notion are the high altitudes of >4000 m, at which lakes occur, making field work impractical. Moreover, flood waves can attenuate rapidly in mountain channels downstream, so that many GLOFs have likely gone unnoticed in past decades. Our knowledge on GLOFs is hence likely biased towards larger, destructive cases, which challenges a detailed quantification of their frequency and their response to atmospheric warming. Robustly quantifying the magnitude and frequency of GLOFs is essential for risk assessment and management along mountain rivers, not least to implement their return periods in building design codes. Motivated by this limited knowledge of GLOF frequency and hazard, I developed an algorithm that efficiently detects GLOFs from satellite images. In essence, this algorithm classifies land cover in 30 years (~1988-2017) of continuously recorded Landsat images over the Himalayas, and calculates likelihoods for rapidly shrinking water bodies in the stack of land cover images. I visually assessed such detected tell-tale sites for sediment fans in the river channel downstream, a second key diagnostic of GLOFs. Rigorous tests and validation with known cases from roughly 10\% of the Himalayas suggested that this algorithm is robust against frequent image noise, and hence capable to identify previously unknown GLOFs. Extending the search radius to the entire Himalayan mountain range revealed some 22 newly detected GLOFs. I thus more than doubled the existing GLOF count from 16 previously known cases since 1988, and found a dominant cluster of GLOFs in the Central and Eastern Himalayas (Bhutan and Eastern Nepal), compared to the rarer affected ranges in the North. Yet, the total of 38 GLOFs showed no change in the annual frequency, so that the activity of GLOFs per unit glacial lake area has decreased in the past 30 years. I discussed possible drivers for this finding, but left a further attribution to distinct GLOF-triggering mechanisms open to future research. This updated GLOF frequency was the key input for assessing GLOF hazard for the entire Himalayan mountain belt and several subregions. I used standard definitions in flood hydrology, describing hazard as the annual exceedance probability of a given flood peak discharge [m3 s-1] or larger at the breach location. I coupled the empirical frequency of GLOFs per region to simulations of physically plausible peak discharges from all existing ~5,000 lakes in the Himalayas. Using an extreme-value model, I could hence calculate flood return periods. I found that the contemporary 100-year GLOF discharge (the flood level that is reached or exceeded on average once in 100 years) is 20,600+2,200/-2,300 m3 s-1 for the entire Himalayas. Given the spatial and temporal distribution of historic GLOFs, contemporary GLOF hazard is highest in the Eastern Himalayas, and lower for regions with rarer GLOF abundance. I also calculated GLOF hazard for some 9,500 overdeepenings, which could expose and fill with water, if all Himalayan glaciers have melted eventually. Assuming that the current GLOF rate remains unchanged, the 100-year GLOF discharge could double (41,700+5,500/-4,700 m3 s-1), while the regional GLOF hazard may increase largest in the Karakoram. To conclude, these three stages-from GLOF detection, to analysing their frequency and estimating regional GLOF hazard-provide a framework for modern GLOF hazard assessment. Given the rapidly growing population, infrastructure, and hydropower projects in the Himalayas, this thesis assists in quantifying the purely climate-driven contribution to hazard and risk from GLOFs.}, language = {en} } @phdthesis{Behm2019, author = {Behm, Laura Vera Johanna}, title = {Thermoresponsive Zellkultursubstrate f{\"u}r zeitlich-r{\"a}umlich gesteuertes Auswachsen neuronaler Zellen}, doi = {10.25932/publishup-43619}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436196}, school = {Universit{\"a}t Potsdam}, pages = {VII, 105}, year = {2019}, abstract = {Ein wichtiges Ziel der Neurowissenschaften ist das Verst{\"a}ndnis der komplexen und zugleich faszinierenden, hochgeordneten Vernetzung der Neurone im Gehirn, welche neuronalen Prozessen, wie zum Beispiel dem Wahrnehmen oder Lernen wie auch Neuropathologien zu Grunde liegt. F{\"u}r verbesserte neuronale Zellkulturmodelle zur detaillierten Untersuchung dieser Prozesse ist daher die Rekonstruktion von geordneten neuronalen Verbindungen dringend erforderlich. Mit Oberfl{\"a}chenstrukturen aus zellattraktiven und zellabweisenden Beschichtungen k{\"o}nnen neuronale Zellen und ihre Neuriten in vitro strukturiert werden. Zur Kontrolle der neuronalen Verbindungsrichtung muss das Auswachsen der Axone zu benachbarten Zellen dynamisch gesteuert werden, zum Beispiel {\"u}ber eine ver{\"a}nderliche Zug{\"a}nglichkeit der Oberfl{\"a}che. In dieser Arbeit wurde untersucht, ob mit thermoresponsiven Polymeren (TRP) beschichtete Zellkultursubstrate f{\"u}r eine dynamische Kontrolle des Auswachsens neuronaler Zellen geeignet sind. TRP k{\"o}nnen {\"u}ber die Temperatur von einem zellabweisenden in einen zellattraktiven Zustand geschaltet werden, womit die Zug{\"a}nglichkeit der Oberfl{\"a}che f{\"u}r Zellen dynamisch gesteuert werden kann. Die TRP-Beschichtung wurde mikrostrukturiert, um einzelne oder wenige neuronale Zellen zun{\"a}chst auf der Oberfl{\"a}che anzuordnen und das Auswachsen der Zellen und Neuriten {\"u}ber definierte TRP-Bereiche in Abh{\"a}ngigkeit der Temperatur zeitlich und r{\"a}umlich zu kontrollieren. Das Protokoll wurde mit der neuronalen Zelllinie SH-SY5Y etabliert und auf humane induzierte Neurone {\"u}bertragen. Die Anordnung der Zellen konnte bei Kultivierung im zellabweisenden Zustand des TRPs f{\"u}r bis zu 7 Tage aufrecht erhalten werden. Durch Schalten des TRPs in den zellattraktiven Zustand konnte das Auswachsen der Neuriten und Zellen zeitlich und r{\"a}umlich induziert werden. Immunozytochemische F{\"a}rbungen und Patch-Clamp-Ableitungen der Neurone demonstrierten die einfache Anwendbarkeit und Zellkompatibilit{\"a}t der TRP-Substrate. Eine pr{\"a}zisere r{\"a}umliche Kontrolle des Auswachsens der Zellen sollte durch lokales Schalten der TRP-Beschichtung erreicht werden. Daf{\"u}r wurden Mikroheizchips mit Mikroelektroden zur lokalen Jouleschen Erw{\"a}rmung der Substratoberfl{\"a}che entwickelt. Zur Evaluierung der generierten Temperaturprofile wurde eine Temperaturmessmethode entwickelt und die erhobenen Messwerte mit numerisch simulierten Werten abgeglichen. Die Temperaturmessmethode basiert auf einfach zu applizierenden Sol-Gel-Schichten, die den temperatursensitiven Fluoreszenzfarbstoff Rhodamin B enthalten. Sie erm{\"o}glicht oberfl{\"a}chennahe Temperaturmessungen in trockener und w{\"a}ssriger Umgebung mit hoher Orts- und Temperaturaufl{\"o}sung. Numerische Simulationen der Temperaturprofile korrelierten gut mit den experimentellen Daten. Auf dieser Basis konnten Geometrie und Material der Mikroelektroden hinsichtlich einer lokal stark begrenzten Temperierung optimiert werden. Ferner wurden f{\"u}r die Kultvierung der Zellen auf den Mikroheizchips eine Zellkulturkammer und Kontaktboard f{\"u}r die elektrische Kontaktierung der Mikroelektroden geschaffen. Die vorgestellten Ergebnisse demonstrieren erstmalig das enorme Potential thermoresponsiver Zellkultursubstrate f{\"u}r die zeitlich und r{\"a}umlich gesteuerte Formation geordneter neuronaler Verbindungen in vitro. Zuk{\"u}nftig k{\"o}nnte dies detaillierte Studien zur neuronalen Informationsverarbeitung oder zu Neuropathologien an relevanten, humanen Zellmodellen erm{\"o}glichen.}, language = {de} } @phdthesis{Angwenyi2019, author = {Angwenyi, David}, title = {Time-continuous state and parameter estimation with application to hyperbolic SPDEs}, doi = {10.25932/publishup-43654}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436542}, school = {Universit{\"a}t Potsdam}, pages = {xi, 101}, year = {2019}, abstract = {Data assimilation has been an active area of research in recent years, owing to its wide utility. At the core of data assimilation are filtering, prediction, and smoothing procedures. Filtering entails incorporation of measurements' information into the model to gain more insight into a given state governed by a noisy state space model. Most natural laws are governed by time-continuous nonlinear models. For the most part, the knowledge available about a model is incomplete; and hence uncertainties are approximated by means of probabilities. Time-continuous filtering, therefore, holds promise for wider usefulness, for it offers a means of combining noisy measurements with imperfect model to provide more insight on a given state. The solution to time-continuous nonlinear Gaussian filtering problem is provided for by the Kushner-Stratonovich equation. Unfortunately, the Kushner-Stratonovich equation lacks a closed-form solution. Moreover, the numerical approximations based on Taylor expansion above third order are fraught with computational complications. For this reason, numerical methods based on Monte Carlo methods have been resorted to. Chief among these methods are sequential Monte-Carlo methods (or particle filters), for they allow for online assimilation of data. Particle filters are not without challenges: they suffer from particle degeneracy, sample impoverishment, and computational costs arising from resampling. The goal of this thesis is to:— i) Review the derivation of Kushner-Stratonovich equation from first principles and its extant numerical approximation methods, ii) Study the feedback particle filters as a way of avoiding resampling in particle filters, iii) Study joint state and parameter estimation in time-continuous settings, iv) Apply the notions studied to linear hyperbolic stochastic differential equations. The interconnection between It{\^o} integrals and stochastic partial differential equations and those of Stratonovich is introduced in anticipation of feedback particle filters. With these ideas and motivated by the variants of ensemble Kalman-Bucy filters founded on the structure of the innovation process, a feedback particle filter with randomly perturbed innovation is proposed. Moreover, feedback particle filters based on coupling of prediction and analysis measures are proposed. They register a better performance than the bootstrap particle filter at lower ensemble sizes. We study joint state and parameter estimation, both by means of extended state spaces and by use of dual filters. Feedback particle filters seem to perform well in both cases. Finally, we apply joint state and parameter estimation in the advection and wave equation, whose velocity is spatially varying. Two methods are employed: Metropolis Hastings with filter likelihood and a dual filter comprising of Kalman-Bucy filter and ensemble Kalman-Bucy filter. The former performs better than the latter.}, language = {en} } @phdthesis{Noack2019, author = {Noack, Sebastian}, title = {Poly(lactide)-based amphiphilic block copolymers}, doi = {10.25932/publishup-43616}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436168}, school = {Universit{\"a}t Potsdam}, pages = {xvii, 148}, year = {2019}, abstract = {Due to its bioavailability and (bio)degradability, poly(lactide) (PLA) is an interesting polymer that is already being used as packaging material, surgical seam, and drug delivery system. Dependent on various parameters such as polymer composition, amphiphilicity, sample preparation, and the enantiomeric purity of lactide, PLA in an amphiphilic block copolymer can affect the self-assembly behavior dramatically. However, sizes and shapes of aggregates have a critical effect on the interactions between biological and drug delivery systems, where the general understanding of these polymers and their ability to influence self-assembly is of significant interest in science. The first part of this thesis describes the synthesis and study of a series of linear poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA)-based amphiphilic block copolymers with varying PLA (hydrophobic), and poly(ethylene glycol) (PEG) (hydrophilic) chain lengths and different block copolymer sequences (PEG-PLA and PLA-PEG). The PEG-PLA block copolymers were synthesized by ring-opening polymerization of lactide initiated by a PEG-OH macroinitiator. In contrast, the PLA-PEG block copolymers were produced by a Steglich-esterification of modified PLA with PEG-OH. The aqueous self-assembly at room temperature of the enantiomerically pure PLLA-based block copolymers and their stereocomplexed mixtures was investigated by dynamic light scattering (DLS), transmission electron microscopy (TEM), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). Spherical micelles and worm-like structures were produced, whereby the obtained self-assembled morphologies were affected by the lactide weight fraction in the block copolymer and self-assembly time. The formation of worm-like structures increases with decreasing PLA-chain length and arises from spherical micelles, which become colloidally unstable and undergo an epitaxial fusion with other micelles. As shown by DSC experiments, the crystallinity of the corresponding PLA blocks increases within the self-assembly time. However, the stereocomplexed self-assembled structures behave differently from the parent polymers and result in irregular-shaped clusters of spherical micelles. Additionally, time-dependent self-assembly experiments showed a transformation, from already self-assembled morphologies of different shapes to more compact micelles upon stereocomplexation. In the second part of this thesis, with the objective to influence the self-assembly of PLA-based block copolymers and its stereocomplexes, poly(methyl phosphonate) (PMeP) and poly(isopropyl phosphonate) (PiPrP) were produced by ring-opening polymerization to implement an alternative to the hydrophilic block PEG. Although, the 1,8 diazabicyclo[5.4.0]unde 7 ene (DBU) or 1,5,7 triazabicyclo[4.4.0]dec-5-ene (TBD) mediated synthesis of the corresponding poly(alkyl phosphonate)s was successful, however, not so the polymerization of copolymers with PLA-based precursors (PLA-homo polymers, and PEG-PLA block copolymers). Transesterification, obtained by 1H-NMR spectroscopy, between the poly(phosphonate)- and PLA block caused a high-field shifted peak split of the methine proton in the PLA polymer chain, with split intensities depending on the used catalyst (DBU for PMeP, and TBD for PiPrP polymerization). An additional prepared block copolymer PiPrP-PLLA that wasn't affected in its polymer sequence was finally used for self-assembly experiments with PLA-PEG and PEG-PLA mixing. This work provides a comprehensive study of the self-assembly behavior of PLA-based block copolymers influenced by various parameters such as polymer block lengths, self-assembly time, and stereocomplexation of block copolymer mixtures.}, language = {en} } @phdthesis{Jakobs2019, author = {Jakobs, Friedrich}, title = {Dubrovin-rings and their connection to Hughes-free skew fields of fractions}, doi = {10.25932/publishup-43556}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435561}, school = {Universit{\"a}t Potsdam}, pages = {ix, 62}, year = {2019}, abstract = {One method of embedding groups into skew fields was introduced by A. I. Mal'tsev and B. H. Neumann (cf. [18, 19]). If G is an ordered group and F is a skew field, the set F((G)) of formal power series over F in G with well-ordered support forms a skew field into which the group ring F[G] can be embedded. Unfortunately it is not suficient that G is left-ordered since F((G)) is only an F-vector space in this case as there is no natural way to define a multiplication on F((G)). One way to extend the original idea onto left-ordered groups is to examine the endomorphism ring of F((G)) as explored by N. I. Dubrovin (cf. [5, 6]). It is possible to embed any crossed product ring F[G; η, σ] into the endomorphism ring of F((G)) such that each non-zero element of F[G; η, σ] defines an automorphism of F((G)) (cf. [5, 10]). Thus, the rational closure of F[G; η, σ] in the endomorphism ring of F((G)), which we will call the Dubrovin-ring of F[G; η, σ], is a potential candidate for a skew field of fractions of F[G; η, σ]. The methods of N. I. Dubrovin allowed to show that specific classes of groups can be embedded into a skew field. For example, N. I. Dubrovin contrived some special criteria, which are applicable on the universal covering group of SL(2, R). These methods have also been explored by J. Gr{\"a}ter and R. P. Sperner (cf. [10]) as well as N.H. Halimi and T. Ito (cf. [11]). Furthermore, it is of interest to know if skew fields of fractions are unique. For example, left and right Ore domains have unique skew fields of fractions (cf. [2]). This is not the general case as for example the free group with 2 generators can be embedded into non-isomorphic skew fields of fractions (cf. [12]). It seems likely that Ore domains are the most general case for which unique skew fields of fractions exist. One approach to gain uniqueness is to restrict the search to skew fields of fractions with additional properties. I. Hughes has defined skew fields of fractions of crossed product rings F[G; η, σ] with locally indicable G which fulfill a special condition. These are called Hughes-free skew fields of fractions and I. Hughes has proven that they are unique if they exist [13, 14]. This thesis will connect the ideas of N. I. Dubrovin and I. Hughes. The first chapter contains the basic terminology and concepts used in this thesis. We present methods provided by N. I. Dubrovin such as the complexity of elements in rational closures and special properties of endomorphisms of the vector space of formal power series F((G)). To combine the ideas of N.I. Dubrovin and I. Hughes we introduce Conradian left-ordered groups of maximal rank and examine their connection to locally indicable groups. Furthermore we provide notations for crossed product rings, skew fields of fractions as well as Dubrovin-rings and prove some technical statements which are used in later parts. The second chapter focuses on Hughes-free skew fields of fractions and their connection to Dubrovin-rings. For that purpose we introduce series representations to interpret elements of Hughes-free skew fields of fractions as skew formal Laurent series. This 1 Introduction allows us to prove that for Conradian left-ordered groups G of maximal rank the statement "F[G; η, σ] has a Hughes-free skew field of fractions" implies "The Dubrovin ring of F [G; η, σ] is a skew field". We will also prove the reverse and apply the results to give a new prove of Theorem 1 in [13]. Furthermore we will show how to extend injective ring homomorphisms of some crossed product rings onto their Hughes-free skew fields of fractions. At last we will be able to answer the open question whether Hughes--free skew fields are strongly Hughes-free (cf. [17, page 53]).}, language = {en} } @phdthesis{Jantzen2019, author = {Jantzen, Friederike}, title = {Genetic basis and adaptive significance of repeated scent loss in selfing Capsella species}, doi = {10.25932/publishup-43525}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435253}, school = {Universit{\"a}t Potsdam}, pages = {124}, year = {2019}, abstract = {Floral scent is an important way for plants to communicate with insects, but scent emission has been lost or strongly reduced during the transition from pollinator-mediated outbreeding to selfing. The shift from outcrossing to selfing is not only accompanied by scent loss, but also by a reduction in other pollinator-attracting traits like petal size and can be observed multiple times among angiosperms. These changes are summarized by the term selfing syndrome and represent one of the most prominent examples of convergent evolution within the plant kingdom. In this work the genus Capsella was used as a model to study convergent evolution in two closely related selfers with separate transitions to self-fertilization. Compared to their outbreeding ancestor C. grandiflora, the emission of benzaldehyde as main compound of floral scent is lacking or strongly reduced in the selfing species C. rubella and C. orientalis. In C. rubella the loss of benzaldehyde was caused by mutations to cinnamate:CoA ligase CNL1, but the biochemical basis and evolutionary history of this loss remained unknown, together with the genetic basis of scent loss in C. orientalis. Here, a combination of plant transformations, in vitro enzyme assays, population genetics and quantitative genetics has been used to address these questions. The results indicate that CNL1 has been inactivated twice independently by point mutations in C. rubella, leading to a loss of benzaldehyde emission. Both inactivated haplotypes can be found around the Mediterranean Sea, indicating that they arose before the species´ geographical spread. This study confirmed CNL1 as a hotspot for mutations to eliminate benzaldehyde emission, as it has been suggested by previous studies. In contrast to these findings, CNL1 in C. orientalis remains active. To test whether similar mechanisms underlie the convergent evolution of scent loss in C. orientalis a QTL mapping approach was used and the results suggest that this closely related species followed a different evolutionary route to reduce floral scent, possibly reflecting that the convergent evolution of floral scent is driven by ecological rather than genetic factors. In parallel with studying the genetic basis of repeated scent loss a method for testing the adaptive value of individual selfing syndrome traits was established. The established method allows estimating outcrossing rates with a high throughput of samples and detects successfully insect-mediated outcrossing events, providing major advantages regarding time and effort compared to other approaches. It can be applied to correlate outcrossing rates with differences in individual traits by using quasi-isogenic lines as demonstrated here or with environmental or morphological parameters. Convergent evolution can not only be observed for scent loss in Capsella but also for the morphological evolution of petal size. Previous studies detected several QTLs underlying the petal size reduction in C. orientalis and C. rubella, some of them shared among both species. One shared QTL is PAQTL1 which might map to NUBBIN, a growth factor. To better understand the morphological evolution and genetic basis of petal size reduction, this QTL was studied. Mapping this QTL to a gene might identify another example for a hotspot gene, in this case for the convergent evolution of petal size.}, language = {en} } @phdthesis{Trautwein2019, author = {Trautwein, Jutta}, title = {The Mental lexicon in acquisition}, doi = {10.25932/publishup-43431}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434314}, school = {Universit{\"a}t Potsdam}, pages = {IV, 177}, year = {2019}, abstract = {The individual's mental lexicon comprises all known words as well related infor-mation on semantics, orthography and phonology. Moreover, entries connect due to simi-larities in these language domains building a large network structure. The access to lexical information is crucial for processing of words and sentences. Thus, a lack of information in-hibits the retrieval and can cause language processing difficulties. Hence, the composition of the mental lexicon is essential for language skills and its assessment is a central topic of lin-guistic and educational research. In early childhood, measurement of the mental lexicon is uncomplicated, for example through parental questionnaires or the analysis of speech samples. However, with growing content the measurement becomes more challenging: With more and more words in the mental lexicon, the inclusion of all possible known words into a test or questionnaire be-comes impossible. That is why there is a lack of methods to assess the mental lexicon for school children and adults. For the same reason, there are only few findings on the courses of lexical development during school years as well as its specific effect on other language skills. This dissertation is supposed to close this gap by pursuing two major goals: First, I wanted to develop a method to assess lexical features, namely lexicon size and lexical struc-ture, for children of different age groups. Second, I aimed to describe the results of this method in terms of lexical development of size and structure. Findings were intended to help understanding mechanisms of lexical acquisition and inform theories on vocabulary growth. The approach is based on the dictionary method where a sample of words out of a dictionary is tested and results are projected on the whole dictionary to determine an indi-vidual's lexicon size. In the present study, the childLex corpus, a written language corpus for children in German, served as the basis for lexicon size estimation. The corpus is assumed to comprise all words children attending primary school could know. Testing a sample of words out of the corpus enables projection of the results on the whole corpus. For this purpose, a vocabulary test based on the corpus was developed. Afterwards, test performance of virtual participants was simulated by drawing different lexicon sizes from the corpus and comparing whether the test items were included in the lexicon or not. This allowed determination of the relation between test performance and total lexicon size and thus could be transferred to a sample of real participants. Besides lexicon size, lexical content could be approximated with this approach and analyzed in terms of lexical structure. To pursue the presented aims and establish the sampling method, I conducted three consecutive studies. Study 1 includes the development of a vocabulary test based on the childLex corpus. The testing was based on the yes/no format and included three versions for different age groups. The validation grounded on the Rasch Model shows that it is a valid instrument to measure vocabulary for primary school children in German. In Study 2, I estab-lished the method to estimate lexicon sizes and present results on lexical development dur-ing primary school. Plausible results demonstrate that lexical growth follows a quadratic function starting with about 6,000 words at the beginning of school and about 73,000 words on average for young adults. Moreover, the study revealed large interindividual differences. Study 3 focused on the analysis of network structures and their development in the mental lexicon due to orthographic similarities. It demonstrates that networks possess small-word characteristics and decrease in interconnectivity with age. Taken together, this dissertation provides an innovative approach for the assessment and description of the development of the mental lexicon from primary school onwards. The studies determine recent results on lexical acquisition in different age groups that were miss-ing before. They impressively show the importance of this period and display the existence of extensive interindividual differences in lexical development. One central aim of future research needs to address the causes and prevention of these differences. In addition, the application of the method for further research (e.g. the adaptation for other target groups) and teaching purposes (e.g. adaptation of texts for different target groups) appears to be promising.}, language = {en} } @phdthesis{Otte2019, author = {Otte, Fabian}, title = {C-Arylglykoside und Chalkone}, doi = {10.25932/publishup-43430}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434305}, school = {Universit{\"a}t Potsdam}, pages = {XI, 201}, year = {2019}, abstract = {Im bis heute andauernden Zeitalter der wissenschaftlichen Medizin, konnte ein breites Spektrum von Wirkstoffen zur Behandlung diverser Krankheiten zusammengetragen werden. Dennoch hat es sich die organische Synthesechemie zur Aufgabe gemacht, dieses Spektrum auf neuen oder bekannten Wegen und aus verschiedenen Gr{\"u}nden zu erweitern. Zum einen ist das Vorkommen bestimmter Verbindungen in der Natur h{\"a}ufig limitiert, sodass synthetische Methoden immer {\"o}fter an Stelle eines weniger nachhaltigen Abbaus treten. Zum anderen kann durch Derivatisierung und Wirkstoffanpassung die physiologische Wirkung oder die Bioverf{\"u}gbarkeit eines Wirkstoffes erh{\"o}ht werden. In dieser Arbeit konnten einige Vertreter der bekannten Wirkstoffklassen C-Arylglykoside und Chalkone durch den Schl{\"u}sselschritt der Palladium-katalysierten MATSUDA-HECK-Reaktion synthetisiert werden. Dazu wurden im Fall der C-Arylglykoside zun{\"a}chst unges{\"a}ttigte Kohlenhydrate (Glykale) {\"u}ber eine Ruthenium-katalysierte Zyklisierungsreaktion dargestellt. Diese wurden im Anschluss mit unterschiedlich substituierten Diazoniumsalzen in der oben erw{\"a}hnten Palladium-katalysierten Kupplungsreaktion zur Reaktion gebracht. Bei der Auswertung der analytischen Daten konnte festgestellt werden, dass stets die trans-Diastereomere gebildet wurden. Im Anschluss konnte gezeigt werden, dass die Doppelbindungen dieser Verbindungen durch Hydrierung, Dihydroxylierung oder Epoxidierung funktionalisiert werden k{\"o}nnen. Auf diesem Wege konnte u. a. eine dem Diabetesmedikament Dapagliflozin {\"a}hnliche Verbindung hergestellt werden. Im zweiten Teil der Arbeit wurden Arylallylchromanone durch die MATSUDA-HECK-Reaktion von verschiedenen 8-Allylchromanonen mit Diazoniumsalzen dargestellt. Dabei konnte beobachtet werden, dass eine MOM-Schutzgruppe in 7-Position der Molek{\"u}le die Darstellung von Produktgemischen unterdr{\"u}ckt und jeweils nur eine der m{\"o}glichen Verbindungen gebildet wird. Die Lage der Doppelbindung konnte mittels 2D-NMR-Untersuchungen lokalisiert werden. In Kooperation mit der theoretischen Chemie sollte durch Berechnungen untersucht werden, wie die beobachteten Verbindungen entstehen. Durch eine auftretende Wechselwirkung innerhalb des Molek{\"u}ls konnte allerdings keine explizite Aussage getroffen werden. Im Anschluss sollten die erhaltenen Verbindungen in einer allylischen Oxidation zu Chalkonen umgesetzt werden. Die Ruthenium-katalysierten Methoden zeigten u. a. keine Eignung. Es konnte allerdings eine metallfreie, Mikrowellen-unterst{\"u}tzte Methode erfolgreich erprobt werden, sodass die Darstellung einiger Vertreter dieser physiologisch aktiven Stoffklasse gelang.}, language = {de} } @phdthesis{Walczak2019, author = {Walczak, Ralf}, title = {Molecular design of nitrogen-doped nanoporous noble carbon materials for gas adsorption}, doi = {10.25932/publishup-43524}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435241}, school = {Universit{\"a}t Potsdam}, pages = {II, 155}, year = {2019}, abstract = {In den modernen Gesellschaften f{\"u}hrt ein stetig steigender Energiebedarf zu dem zunehmenden Verbrauch fossiler Brennstoffe wie Kohle, {\"O}l, und Gas. Die Verbrennung dieser kohlenstoffbasierten Brennstoffe f{\"u}hrt unweigerlich zur Freisetzung von Treibhausgasen, vor allem von CO2. Die CO2 Aufnahme unmittelbar bei den Verbrennungsanlagen oder direkt aus der Luft, zusammen mit Regulierung von CO2 produzierenden Energiesektoren (z.B. K{\"u}hlanlagen), k{\"o}nnen den CO2 Ausstoß reduzieren. Allerdings f{\"u}hren insbesondere bei der CO2 Aufnahme die geringen CO2 Konzentrationen und die Aufnahme konkurrierender Gase zu niedrigen CO2 Kapazit{\"a}ten und Selektivit{\"a}ten. Das Zusammenspiel der Gastmolek{\"u}le mit por{\"o}sen Materialien ist dabei essentiell. Por{\"o}se Kohlenstoffmaterialien besitzen attraktive Eigenschaften, unter anderem elektrische Leitf{\"a}higkeit, einstellbare Porosit{\"a}t, als auch chemische und thermische Stabilit{\"a}t. Allerdings f{\"u}hrt die zu geringe Polarisierbarkeit dieser Materialien zu einer geringen Affinit{\"a}t zu polaren Molek{\"u}len (z.B. CO2, H2O, oder NH3). Diese Affinit{\"a}t kann durch den Einbau von Stickstoff erh{\"o}ht werden. Solche Materialien sind oft „edler" als reine Kohlenstoffe, dies bedeutet, dass sie eher oxidierend wirken, als selbst oxidiert zu werden. Die Problematik besteht darin, einen hohen und gleichm{\"a}ßig verteilten Stickstoffgehalt in das Kohlenstoffger{\"u}st einzubauen. Die Zielsetzung dieser Dissertation ist die Erforschung neuer Synthesewege f{\"u}r stickstoffdotierte edle Kohlenstoffmaterialien und die Entwicklung eines grundlegenden Verst{\"a}ndnisses f{\"u}r deren Anwendung in Gasadsorption und elektrochemischer Energiespeicherung. Es wurde eine templatfreie Synthese f{\"u}r stickstoffreiche, edle, und mikropor{\"o}se Kohlenstoffmaterialien durch direkte Kondensation eines stickstoffreichen organischen Molek{\"u}ls als Vorl{\"a}ufer erarbeitet. Dadurch konnten Materialien mit hohen Adsorptionskapazit{\"a}ten f{\"u}r H2O und CO2 bei niedrigen Konzentrationen und moderate CO2/N2 Selektivit{\"a}ten erzielt werden. Um die CO2/N2 Selektivit{\"a}ten zu verbessern, wurden mittels der Einstellung des Kondensationsgrades die molekulare Struktur und Porosit{\"a}t der Kohlenstoffmaterialien kontrolliert. Diese Materialien besitzen die Eigenschaften eines molekularen Siebs f{\"u}r CO2 {\"u}ber N2, das zu herausragenden CO2/N2 Selektivit{\"a}ten f{\"u}hrt. Der ultrahydrophile Charakter der Porenoberfl{\"a}chen und die kleinen Mikroporen dieser Kohlenstoffmaterialien erm{\"o}glichen grundlegende Untersuchungen f{\"u}r die Wechselwirkungen mit Molek{\"u}len die polarer sind als CO2, n{\"a}mlich H2O und NH3. Eine weitere Reihe stickstoffdotierter Kohlenstoffmaterialien wurde durch Kondensation eines konjugierten mikropor{\"o}sen Polymers synthetisiert und deren strukturelle Besonderheiten als Anodenmaterial f{\"u}r die Natriumionen Batterie untersucht. Diese Dissertation leistet einen Beitrag zur Erforschung stickstoffdotierter Kohlenstoffmaterialien und deren Wechselwirkungen mit verschiedenen Gastmolek{\"u}len.}, language = {en} } @phdthesis{Kagel2019, author = {Kagel, Heike}, title = {Light-induced pH cycle}, doi = {10.25932/publishup-43435}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434353}, school = {Universit{\"a}t Potsdam}, pages = {VI, 118}, year = {2019}, abstract = {Background Many biochemical reactions depend on the pH of their environment and some are strongly accelerated in an acidic surrounding. A classical approach to control biochemical reactions non-invasivly is by changing the temperature. However, if the pH could be controlled by optical means using photo-active chemicals, this would mean to be able to accelerate suitable biochemical reactions. Optically switching the pH can be achieved by using photoacids. A photoacid is a molecule with a functional group that releases a proton upon irradiation with the suitable wavelength, acidifying the environmental aqueous surrounding. A major goal of this work was to establish a non-invasive method of optically controlling the pH in aqueous solutions, offering the opportunity to enhance the known chemical reactions portfolio. To demonstrate the photo-switchable pH cycling we chose an enzymatic assay using acid phosphatase, which is an enzyme with a strong pH dependent activity. Results In this work we could demonstrate a light-induced, reversible control of the enzymatic activity of acid phosphatase non-invasivly. To successfully conduct those experiments a high power LED array was designed and built, suitable for a 96 well standard microtiter plate, not being commercially available. Heat management and a lateral ventilation system to avoid heat accumulation were established and a stable light intensity achieved. Different photoacids were characterised and their pH dependent absorption spectra recorded. By using the reversible photoacid G-acid as a proton donor, the pH can be changed reversibly using high power UV 365 nm LEDs. To demonstrate the pH cycling, acid phosphatase with hydrolytic activity under acidic conditions was chosen. An assay using the photoacid together with the enzyme was established, also providing that G-acid does not inhibit acid phosphatase. The feasibility of reversibly regulating the enzyme's pH dependent activity by optical means was demonstrated, by controlling the enzymatic activity with light. It was demonstrated that the enzyme activity depends on the light exposure time only. When samples are not illuminated and left in the dark, no enzymatic activity was recorded. The process can be rapidly controlled by simply switching the light on and off and should be applicable to a wide range of enzymes and biochemical reactions. Conclusions Reversible photoacids offer a light-dependent regulation of pH, making them extremely attractive for miniaturizable, non-invasive and time-resolved control of biochemical reactions. Many enzymes have a sharp pH dependent activity, thus the established setup in this thesis could be used for a versatile enzyme portfolio. Even though the demonstrated photo-switchable strategy could also be used for non-enzymatic assays, greatly facilitating the assay establishment. Photoacids have the potential for high throughput methods and automation. We demonstrated that it is possible to control photoacids using commonly available LEDs, making their use in highly integrated devices and instruments more attractive. The successfully designed 96 well high power UV LED array presents an opportunity for general combinatorial analysis in e.g. photochemistry, where a high light intensity is needed for the investigation of various reactions.}, language = {en} } @phdthesis{Korges2019, author = {Korges, Maximilian}, title = {Constraining the hydrology of intrusion-related ore deposits with fluid inclusions and numerical modeling}, doi = {10.25932/publishup-43484}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434843}, school = {Universit{\"a}t Potsdam}, pages = {VIII, 99}, year = {2019}, abstract = {Magmatic-hydrothermal fluids are responsible for numerous mineralization types, including porphyry copper and granite related tin-tungsten (Sn-W) deposits. Ore formation is dependent on various factors, including, the pressure and temperature regime of the intrusions, the chemical composition of the magma and hydrothermal fluids, and fluid rock interaction during the ascent. Fluid inclusions have potential to provide direct information on the temperature, salinity, pressure and chemical composition of fluids responsible for ore formation. Numerical modeling allows the parametrization of pluton features that cannot be analyzed directly via geological observations. Microthermometry of fluid inclusions from the Zinnwald Sn-W deposit, Erzgebirge, Germany / Czech Republic, provide evidence that the greisen mineralization is associated with a low salinity (2-10 wt.\% NaCl eq.) fluid with homogenization temperatures between 350°C and 400°C. Quartzes from numerous veins are host to inclusions with the same temperatures and salinities, whereas cassiterite- and wolframite-hosted assemblages with slightly lower temperatures (around 350°C) and higher salinities (ca. 15 wt. NaCl eq.). Further, rare quartz samples contained boiling assemblages consisting of coexisting brine and vapor phases. The formation of ore minerals within the greisen is driven by invasive fluid-rock interaction, resulting in the loss of complexing agents (Cl-) leading to precipitation of cassiterite. The fluid inclusion record in the veins suggests boiling as the main reason for cassiterite and wolframite mineralization. Ore and coexisting gangue minerals hosted different types of fluid inclusions where the beginning boiling processes are solely preserved by the ore minerals emphasizing the importance of microthermometry in ore minerals. Further, the study indicates that boiling as a precipitation mechanism can only occur in mineralization related to shallow intrusions whereas deeper plutons prevent the fluid from boiling and can therefore form tungsten mineralization in the distal regions. The tin mineralization in the H{\"a}mmerlein deposit, Erzgebirge, Germany, occurs within a skarn horizon and the underlying schist. Cassiterite within the skarn contains highly saline (30-50 wt\% NaCl eq.) fluid inclusions, with homogenization temperatures up to 500°C, whereas cassiterites from the schist and additional greisen samples contain inclusions of lower salinity (~5 wt\% NaCl eq.) and temperature (between 350 and 400°C). Inclusions in the gangue minerals (quartz, fluorite) preserve homogenization temperatures below 350°C and sphalerite showed the lowest homogenization temperatures (ca. 200°C) whereby all minerals (cassiterite from schist and greisen, gangue minerals and sphalerite) show similar salinity ranges (2-5 wt\% NaCl eq.). Similar trace element contents and linear trends in the chemistry of the inclusions suggest a common source fluid. The inclusion record in the H{\"a}mmerlein deposit documents an early exsolution of hot brines from the underlying granite which is responsible for the mineralization hosted by the skarn. Cassiterites in schist and greisen are mainly forming due to fluid-rock interaction at lower temperatures. The low temperature inclusions documented in the sphalerite mineralization as well as their generally low trace element composition in comparison to the other minerals suggests that their formation was induced by mixing with meteoric fluids. Numerical simulations of magma chambers and overlying copper distribution document the importance of incremental growth by sills. We analyzed the cooling behavior at variable injection intervals as well as sill thicknesses. The models suggest that magma accumulation requires volumetric injection rates of at least 4 x 10-4 km³/y. These injection rates are further needed to form a stable magmatic-hydrothermal fluid plume above the magma chamber to ensure a constant copper precipitation and enrichment within a confined location in order to form high-grade ore shells within a narrow geological timeframe between 50 and 100 kyrs as suggested for porphyry copper deposits. The highest copper enrichment can be found in regions with steep temperature gradients, typical of regions where the magmatic-hydrothermal fluid meets the cooler ambient fluids.}, language = {en} } @phdthesis{Laudan2019, author = {Laudan, Jonas}, title = {Changing susceptibility of flood-prone residents in Germany}, doi = {10.25932/publishup-43442}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434421}, school = {Universit{\"a}t Potsdam}, pages = {113}, year = {2019}, abstract = {Floods are among the most costly natural hazards that affect Europe and Germany, demanding a continuous adaptation of flood risk management. While social and economic development in recent years altered the flood risk patterns mainly with regard to an increase in flood exposure, different flood events are further expected to increase in frequency and severity in certain European regions due to climate change. As a result of recent major flood events in Germany, the German flood risk management shifted to more integrated approaches that include private precaution and preparation to reduce the damage on exposed assets. Yet, detailed insights into the preparedness decisions of flood-prone households remain scarce, especially in connection to mental impacts and individual coping strategies after being affected by different flood types. This thesis aims to gain insights into flash floods as a costly hazard in certain German regions and compares the damage driving factors to the damage driving factors of river floods. Furthermore, psychological impacts as well as the effects on coping and mitigation behaviour of flood-affected households are assessed. In this context, psychological models such as the Protection Motivation Theory (PMT) and methods such as regressions and Bayesian statistics are used to evaluate influencing factors on the mental coping after an event and to identify psychological variables that are connected to intended private flood mitigation. The database consists of surveys that were conducted among affected households after major river floods in 2013 and flash floods in 2016. The main conclusions that can be drawn from this thesis reveal that the damage patterns and damage driving factors of strong flash floods differ significantly from those of river floods due to a rapid flow origination process, higher flow velocities and flow forces. However, the effects on mental coping of people that have been affected by flood events appear to be weakly influenced by different flood types, but yet show a coherence to the event severity, where often thinking of the respective event is pronounced and also connected to a higher mitigation motivation. The mental coping and preparation after floods is further influenced by a good information provision and a social environment, which encourages a positive attitude towards private mitigation. As an overall recommendation, approaches for an integrated flood risk management in Germany should be followed that also take flash floods into account and consider psychological characteristics of affected households to support and promote private flood mitigation. Targeted information campaigns that concern coping options and discuss current flood risks are important to better prepare for future flood hazards in Germany.}, language = {en} } @phdthesis{Krejca2019, author = {Krejca, Martin Stefan}, title = {Theoretical analyses of univariate estimation-of-distribution algorithms}, doi = {10.25932/publishup-43487}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434870}, school = {Universit{\"a}t Potsdam}, pages = {xii, 243}, year = {2019}, abstract = {Optimization is a core part of technological advancement and is usually heavily aided by computers. However, since many optimization problems are hard, it is unrealistic to expect an optimal solution within reasonable time. Hence, heuristics are employed, that is, computer programs that try to produce solutions of high quality quickly. One special class are estimation-of-distribution algorithms (EDAs), which are characterized by maintaining a probabilistic model over the problem domain, which they evolve over time. In an iterative fashion, an EDA uses its model in order to generate a set of solutions, which it then uses to refine the model such that the probability of producing good solutions is increased. In this thesis, we theoretically analyze the class of univariate EDAs over the Boolean domain, that is, over the space of all length-n bit strings. In this setting, the probabilistic model of a univariate EDA consists of an n-dimensional probability vector where each component denotes the probability to sample a 1 for that position in order to generate a bit string. My contribution follows two main directions: first, we analyze general inherent properties of univariate EDAs. Second, we determine the expected run times of specific EDAs on benchmark functions from theory. In the first part, we characterize when EDAs are unbiased with respect to the problem encoding. We then consider a setting where all solutions look equally good to an EDA, and we show that the probabilistic model of an EDA quickly evolves into an incorrect model if it is always updated such that it does not change in expectation. In the second part, we first show that the algorithms cGA and MMAS-fp are able to efficiently optimize a noisy version of the classical benchmark function OneMax. We perturb the function by adding Gaussian noise with a variance of σ², and we prove that the algorithms are able to generate the true optimum in a time polynomial in σ² and the problem size n. For the MMAS-fp, we generalize this result to linear functions. Further, we prove a run time of Ω(n log(n)) for the algorithm UMDA on (unnoisy) OneMax. Last, we introduce a new algorithm that is able to optimize the benchmark functions OneMax and LeadingOnes both in O(n log(n)), which is a novelty for heuristics in the domain we consider.}, language = {en} } @phdthesis{Arf2019, author = {Arf, Shelan Ali}, title = {Women's everyday reality of social insecurity}, doi = {10.25932/publishup-43433}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434333}, school = {Universit{\"a}t Potsdam}, pages = {334}, year = {2019}, abstract = {Since 1980 Iraq passed through various wars and conflicts including Iraq-Iran war, Saddam Hussein's the Anfals and Halabja campaigns against the Kurds and the killing campaigns against Shiite in 1986, Saddam Hussein's invasion of Kuwait in August 1990, the Gulf war in 1990, Iraq war in 2003 and the fall of Saddam, the conflicts and chaos in the transmission of power after the death of Saddam, and the war against ISIS . All these wars left severe impacts in most households in Iraq; on women and children in particular. The consequences of such long wars could be observed in all sectors including economic, social, cultural and religious sectors. The social structure, norms and attitudes are intensely affected. Many women specifically divorced women found them-selves in challenging different difficulties such as social as well as economic situations. Thus the divorced women in Iraqi Kurdistan are the focus of this research. Considering the fact that there is very few empirical researches on this topic, a constructivist grounded theory methodology (CGT) is viewed as reliable in order to come up with a comprehensive picture about the everyday life of divorced women in Iraqi Kurdistan. Data collected in Sulaimani city in Iraqi Kurdistan. The work of Kathy Charmaz was chosen to be the main methodological context of the research and the main data collection method was individual intensive narrative interviews with divorced women. Women generally and divorced women specifically in Iraqi Kurdistan are living in a patriarchal society that passing through many changes due to the above mentioned wars among many other factors. This research is trying to study the everyday life of divorced women in such situations and the forms of social insecurity they are experiencing. The social institutions starting from the family as a very significant institution for women to the governmental and non-governmental institutions that are working to support women, and the copying strategies, are in focus in this research. The main research argument is that the family is playing ambivalent roles in divorced women's life. For instance, on one side families are revealed to be an essential source of security to most respondents, on the other side families posed also many threats and restrictions on those women. This argument supported by what called by Suad joseph "the paradox of support and suppression" . Another important finding is that the stat institution(laws , constitutions ,Offices of combating violence against woman and family) are supporting women somehow and offering them protection from the insecurities but it is clear that the existence of the laws does not stop the violence against women in Iraqi Kurdistan, As explained by Pateman because the laws /the contract is a sexual-social contract that upholds the sex rights of males and grants them more privileges than females. The political instability, Tribal social norms also play a major role in influencing the rule of law. It is noteworthy to refer that analyzing the interviews in this research showed that in spite that divorced women living in insecurities and facing difficulties but most of the respondents try to find a coping strategies to tackle difficult situations and to deal with the violence they face; these strategies are bargaining, sometimes compromising or resisting …etc. Different theories used to explain these coping strategies such as bargaining with patriarchy. Kandiyoti who stated that women living under certain restraints struggle to find way and strategies to enhance their situations. The research finding also revealed that the western liberal feminist view of agency is limited this is agree with Saba Mahmood and what she explained about Muslim women agency. For my respondents, who are divorced women, their agency reveals itself in different ways, in resisting or compromising with or even obeying the power of male relatives, and the normative system in the society. Agency is also explained the behavior of women contacting formal state institutions in cases of violence like the police or Offices of combating violence against woman and family.}, language = {en} } @phdthesis{Sarhan2019, author = {Sarhan, Radwan Mohamed}, title = {Plasmon-driven photocatalytic reactions monitored by surface-enhanced Raman spectroscopy}, doi = {10.25932/publishup-43330}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-433304}, school = {Universit{\"a}t Potsdam}, year = {2019}, abstract = {Plasmonic metal nanostructures can be tuned to efficiently interact with light, converting the photons into energetic charge carriers and heat. Therefore, the plasmonic nanoparticles such as gold and silver nanoparticles act as nano-reactors, where the molecules attached to their surfaces benefit from the enhanced electromagnetic field along with the generated energetic charge carriers and heat for possible chemical transformations. Hence, plasmonic chemistry presents metal nanoparticles as a unique playground for chemical reactions on the nanoscale remotely controlled by light. However, defining the elementary concepts behind these reactions represents the main challenge for understanding their mechanism in the context of the plasmonically assisted chemistry. Surface-enhanced Raman scattering (SERS) is a powerful technique employing the plasmon-enhanced electromagnetic field, which can be used for probing the vibrational modes of molecules adsorbed on plasmonic nanoparticles. In this cumulative dissertation, I use SERS to probe the dimerization reaction of 4-nitrothiophenol (4-NTP) as a model example of plasmonic chemistry. I first demonstrate that plasmonic nanostructures such as gold nanotriangles and nanoflowers have a high SERS efficiency, as evidenced by probing the vibrations of the rhodamine dye R6G and the 4-nitrothiophenol 4-NTP. The high signal enhancement enabled the measurements of SERS spectra with a short acquisition time, which allows monitoring the kinetics of chemical reactions in real time. To get insight into the reaction mechanism, several time-dependent SERS measurements of the 4-NTP have been performed under different laser and temperature conditions. Analysis of the results within a mechanistic framework has shown that the plasmonic heating significantly enhances the reaction rate, while the reaction is probably initiated by the energetic electrons. The reaction was shown to be intensity-dependent, where a certain light intensity is required to drive the reaction. Finally, first attempts to scale up the plasmonic catalysis have been performed showing the necessity to achieve the reaction threshold intensity. Meanwhile, the induced heat needs to quickly dissipate from the reaction substrate, since otherwise the reactants and the reaction platform melt. This study might open the way for further work seeking the possibilities to quickly dissipate the plasmonic heat generated during the reaction and therefore, scaling up the plasmonic catalysis.}, language = {en} } @phdthesis{Ramachandran2019, author = {Ramachandran, Varsha}, title = {Massive star evolution, star formation, and feedback at low metallicity}, doi = {10.25932/publishup-43245}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432455}, school = {Universit{\"a}t Potsdam}, pages = {291}, year = {2019}, abstract = {The goal of this thesis is to broaden the empirical basis for a better, comprehensive understanding of massive star evolution, star formation and feedback at low metallicity. Low metallicity massive stars are a key to understand the early universe. Quantitative information on metal-poor massive stars was sparse before. The quantitative spectroscopic studies of massive star populations associated with large-scale ISM structures were not performed at low metallicity before, but are important to investigate star-formation histories and feedback in detail. Much of this work relies on spectroscopic observations with VLT-FLAMES of ~500 OB stars in the Magellanic Clouds. When available, the optical spectroscopy was complemented by UV spectra from the HST, IUE, and FUSE archives. The two representative young stellar populations that have been studied are associated with the superbubble N 206 in the Large Magellanic Cloud (LMC) and with the supergiant shell SMC-SGS 1 in the Wing of the Small Magellanic Cloud (SMC), respectively. We performed spectroscopic analyses of the massive stars using the nonLTE Potsdam Wolf-Rayet (PoWR) model atmosphere code. We estimated the stellar, wind, and feedback parameters of the individual massive stars and established their statistical distributions. The mass-loss rates of N206 OB stars are consistent with theoretical expectations for LMC metallicity. The most massive and youngest stars show nitrogen enrichment at their surface and are found to be slower rotators than the rest of the sample. The N 206 complex has undergone star formation episodes since more than 30 Myr, with a current star formation rate higher than average in the LMC. The spatial age distribution of stars across the complex possibly indicates triggered star formation due to the expansion of the superbubble. Three very massive, young Of stars in the region dominate the ionizing and mechanical feedback among hundreds of other OB stars in the sample. The current stellar wind feedback rate from the two WR stars in the complex is comparable to that released by the whole OB sample. We see only a minor fraction of this stellar wind feedback converted into X-ray emission. In this LMC complex, stellar winds and supernovae equally contribute to the total energy feedback, which eventually powered the central superbubble. However, the total energy input accumulated over the time scale of the superbubble significantly exceeds the observed energy content of the complex. The lack of energy along with the morphology of the complex suggests a leakage of hot gas from the superbubble. With a detailed spectroscopic study of massive stars in SMC-SGS 1, we provide the stellar and wind parameters of a large sample of OB stars at low metallicity, including those in the lower mass-range. The stellar rotation velocities show a broad, tentatively bimodal distribution, with Be stars being among the fastest. A few very luminous O stars are found close to the main sequence, while all other, slightly evolved stars obey a strict luminosity limit. Considering additional massive stars in evolved stages, with published parameters and located all over the SMC, essentially confirms this picture. The comparison with single-star evolutionary tracks suggests a dichotomy in the fate of massive stars in the SMC. Only stars with an initial mass below 30 solar masses seem to evolve from the main sequence to the cool side of the HRD to become a red supergiant and to explode as type II-P supernova. In contrast, more massive stars appear to stay always hot and might evolve quasi chemically homogeneously, finally collapsing to relatively massive black holes. However, we find no indication that chemical mixing is correlated with rapid rotation. We measured the key parameters of stellar feedback and established the links between the rates of star formation and supernovae. Our study demonstrates that in metal-poor environments stellar feedback is dominated by core-collapse supernovae in combination with winds and ionizing radiation supplied by a few of the most massive stars. We found indications of the stochastic mode of star formation, where the resulting stellar population is fully capable of producing large-scale structures such as the supergiant shell SMC-SGS 1 in the Wing. The low level of feedback in metal-poor stellar populations allows star formation episodes to persist over long timescales. Our study showcases the importance of quantitative spectroscopy of massive stars with adequate stellar-atmosphere models in order to understand star-formation, evolution, and feedback. The stellar population analyses in the LMC and SMC make us understand that massive stars and their impact can be very different depending on their environment. Obviously, due to their different metallicity, the massive stars in the LMC and the SMC follow different evolutionary paths. Their winds differ significantly, and the key feedback agents are different. As a consequence, the star formation can proceed in different modes.}, language = {en} } @phdthesis{BernaschinaSchuermann2019, author = {Bernaschina Sch{\"u}rmann, Vicente}, title = {{\´A}ngeles que cantan de continuo}, isbn = {978-3-86956-459-3}, issn = {2629-2548}, doi = {10.25932/publishup-42645}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-426450}, school = {Universit{\"a}t Potsdam}, pages = {387}, year = {2019}, abstract = {Objeto de esta investigaci{\´o}n es el auge y ca{\´i}da de una legitimaci{\´o}n teol{\´o}gica de la poes{\´i}a que tuvo lugar en el virreinato del Per{\´u} entre fines del siglo XVI y la segunda mitad del siglo XVII. Su punto c{\´u}lmine est{\´a} marcado por el surgimiento de una "Academia Ant{\´a}rtica" en las primeras d{\´e}cadas del siglo XVII, mientras que su fin, se aprecia a fines del mismo siglo, cuando eruditos de las {\´o}rdenes religiosas, especialmente Juan de Espinosa y Medrano en sus textos en defensa de la poes{\´i}a y las ciencias, negaron a la poes{\´i}a cualquier estatuto teol{\´o}gico, sirvi{\´e}ndose sin embargo de ella para escribir sus sermones y textos. A partir del auge y ca{\´i}da de esta legitimaci{\´o}n teol{\´o}gica en el virreinato del Per{\´u}, este estudio muestra la existencia de dos movimientos que forman un quiasmo entre una teologizaci{\´o}n de la poes{\´i}a y una poetizaci{\´o}n de la teolog{\´i}a, en cuyo centro velado se encuentra en disputa el saber te{\´o}rico y pr{\´a}ctico de la poes{\´i}a. Lo que est{\´a} en disputa en este sentido no es la poes{\´i}a, entendida como una cumbre de las bellas letras, sino la posesi{\´o}n leg{\´i}tima de un modo de lectura anal{\´o}gico y tipol{\´o}gico del orden del universo, fundado en las Sagradas Escrituras y en la historia de la salvaci{\´o}n, y un modo po{\´e}tico para doctrinar a todos los miembros de la sociedad virreinal en concordancia con aquel modo de lectura.}, language = {es} } @phdthesis{Gabriel2019, author = {Gabriel, Christina}, title = {Entwicklung neuer St{\"a}rkederivate f{\"u}r die Anwendung als wasserbasierte Filmbildner in Farben und Lacken}, doi = {10.25932/publishup-43294}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432942}, school = {Universit{\"a}t Potsdam}, pages = {XVIII, 160, xxxix, x1}, year = {2019}, abstract = {In den letzten Jahrzehnten fand auch in der Beschichtungsindustrie ein Umdenken hin zu umweltfreundlicheren Farben und Lacken statt. Allerdings basieren auch neue L{\"o}sungen meist nicht auf Biopolymeren und in einem noch geringeren Anteil auf wasserbasierten Beschichtungssystemen aus nachwachsenden Rohstoffen. Dies stellt den Ankn{\"u}pfungspunkt dieser Arbeit dar, in der untersucht wurde, ob das Biopolymer St{\"a}rke das Potenzial zum wasserbasierten Filmbildner f{\"u}r Farben und Lacke besitzt. Dabei m{\"u}ssen angelehnt an etablierte synthetische Marktprodukte die folgenden Kriterien erf{\"u}llt werden: Die w{\"a}ssrige Dispersion muss mindestens einen 30\%igen Feststoffgehalt haben, bei Raumtemperatur verarbeitet werden k{\"o}nnen und Viskosit{\"a}ten zwischen 10^2-10^3 mPa·s aufweisen. Die finale Beschichtung muss einen geschlossenen Film bilden und sehr gute Haftfestigkeiten zu einer spezifischen Oberfl{\"a}che, in dieser Arbeit Glas, besitzen. Als Grundlage f{\"u}r die Modifizierung der St{\"a}rke wurde eine Kombination von molekularem Abbau und chemischer Funktionalisierung ausgew{\"a}hlt. Da nicht bekannt war, welchen Einfluss die St{\"a}rkeart, die gew{\"a}hlte Abbaureaktion als auch verschiedene Substituenten auf die Dispersionsherstellung und deren Eigenschaften sowie die Beschichtungseigenschaften aus{\"u}ben k{\"o}nnten, wurden die strukturellen Parameter getrennt voneinander untersucht. Das erste Themengebiet beinhaltete den oxidativen Abbau von Kartoffel- und Palerbsenst{\"a}rke mittels des Hypochlorit-Abbaus (OCl-) und des ManOx-Abbaus (H2O2, KMnO4). Mit beiden Abbaureaktionen konnten vergleichbare gewichtsmittlere Molmassen (Mw) von 2·10^5-10^6 g/mol (GPC-MALS) hergestellt werden. Allerdings f{\"u}hrten die gew{\"a}hlten Reaktionsbedingungen beim ManOx-Abbau zur Bildung von Gelpartikeln. Diese lagen im µm-Bereich (DLS und Kryo-REM-Messungen) und hatten zur Folge, dass die ManOx-Proben deutlich erh{\"o}hte Viskosit{\"a}ten (c: 7,5 \%; 9-260 mPa·s) im Vergleich zu den OCl--Proben (4-10 mPa·s) bei scherverd{\"u}nnendem Verhalten besaßen und die Eigenschaften von viskoelastischen Gelen (G' > G'') zeigten. Des Weiteren wiesen sie reduzierte Heißwasserl{\"o}slichkeiten (95 °C, vorrangig: 70-99 \%) auf. Der OCl--Abbau f{\"u}hrte zu hydrophileren (Carboxylgruppengehalt bis zu 6,1 \%; ManOx: bis zu 3,1 \%), nach 95 °C-Behandlung vollst{\"a}ndig wasserl{\"o}slichen abgebauten St{\"a}rken, die ein Newtonsches Fließverhalten mit Eigenschaften einer viskoelastischen Fl{\"u}ssigkeit (G'' > G') hatten. Die OCl--Proben konnten im Vergleich zu den ManOx-Produkten (10-20 \%) zu konzentrierteren Dispersionen (20-40 \%) verarbeitet werden, die gleichzeitig die Einschr{\"a}nkung von anwendungsrelevanten Mw auf < 7·10^5 g/mol zuließen (Konzentration sollte > 30 \% sein). Außerdem f{\"u}hrten nur die OCl--Proben der Kartoffelst{\"a}rke zu transparenten (alle anderen waren opak) geschlossenen Beschichtungsfilmen. Somit hebt sich die Kombination von OCl--Abbau und Kartoffelst{\"a}rke mit Hinblick auf die Endanwendung ab. Das zweite Themengebiet umfasste Untersuchungen zum Einfluss von Ester- und Hydroxyalkylether-Substituenten auf Basis einer industriell abgebauten Kartoffelst{\"a}rke (Mw: 1,2·10^5 g/mol) vor allem auf die Dispersionsherstellung, die rheologischen Eigenschaften der Dispersionen und die Beschichtungseigenschaften in Kombination mit Glassubstraten. Dazu wurden Ester und Ether mit DS/MS-Werten von 0,07-0,91 synthetisiert. Die Derivate konnten zu wasserbasierten Dispersionen mit Konzentrationen von 30-45 \% verarbeitet werden, wobei bei hydrophoberen Modifikaten ein Co-L{\"o}semittel, Diethylenglycolmonobutylether (DEGBE), eingesetzt werden musste. Die Feststoffgehalte sanken dabei f{\"u}r beide Derivatklassen vor allem mit zunehmender Alkylkettenl{\"a}nge. Die anwendungsrelevanten Viskosit{\"a}ten (323-1240 mPa·s) stiegen auf Grund von Wechselwirkungen tendenziell mit DS/MS und Alkylkettenl{\"a}nge an. Hinsichtlich der Beschichtungseigenschaften erwiesen sich die Ester vergleichend zu den Ethern als die bevorzugte Substituentenklasse, da nur die Ester geschlossene, defektfreie und mehrheitlich transparente Beschichtungsfilme bildeten, die exzellente bis sehr gute Haftfestigkeiten (ISO Klasse: 0 und 1) auf Glas besaßen. Die Ether bildeten mehrheitlich br{\"u}chige Filme. Basierend auf der Kombination der Ergebnisse aus L{\"o}semittelaustausch, den rheologischen Untersuchungen und zus{\"a}tzlichen Oberfl{\"a}chenspannungsmessungen (30-61 mN/m) konnte geschlossen werden, dass wahrscheinlich fehlende oder schlechte Haftfestigkeiten vorrangig akkumuliertem Wasser in den Beschichtungsfilmen (visuell: tr{\"u}b oder weiß) geschuldet sind, w{\"a}hrend die Br{\"u}chigkeit vermutlich auf Wechselwirkungen (H-Br{\"u}cken Wechselwirkungen, hydrophobe Wechselwirkungen) zwischen den Polymeren zur{\"u}ckgef{\"u}hrt werden kann. Insgesamt scheint die Kombination aus Kartoffelst{\"a}rke basierend auf dem OCl--Abbau mit Mw < 7·10^5 g/mol und einem Estersubstituenten eine gute Wahl f{\"u}r wasserbasierte Dispersionen mit hohen Feststoffkonzentrationen (> 30 \%), guter Filmbildung und exzellenten Haftungen auf Glas zu sein.}, language = {de} } @phdthesis{PerezMedrano2019, author = {P{\´e}rez Medrano, Cuauht{\´e}moc}, title = {Ficci{\´o}n her{\´e}tica}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-454-8}, issn = {2629-2548}, doi = {10.25932/publishup-42449}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-424490}, school = {Universit{\"a}t Potsdam}, pages = {226}, year = {2019}, abstract = {Mit der kubanischen Wirtschaftskrise entstanden neue literarische Gestaltungsprozesse nationaler Identit{\"a}tskonstruktionen. Die vorliegende Analyse geht der zeitgen{\"o}ssischen Literatur Kubas nach, in der soziale, kulturelle und politische Paradoxe der post-revolution{\"a}ren Weltanschauung zum Vorschein kommen und der Figur der „Insel" bzw. „Insularit{\"a}t" eine große Bedeutung f{\"u}r die Neukonfiguration der Nation zukommt. Die „Insularit{\"a}t" dr{\"u}ckt in literarischen Texten verschiedene Aneignungen des Raumes und somit auch eine Weltanschauungen aus. Die literarische Figur der „Insel" kann hypothetisch als „visuelles Ph{\"a}nomen" (Ette 2002) konzipiert werden, das durch soziokulturelle Umst{\"a}nde konfiguriert wird. Unterschiedliche postkommunistische Erfahrungen bilden sog. „erlebnisweltliche" Repr{\"a}sentationen und somit literarische und soziale Identit{\"a}tsbilder. Im Verlauf der Zeit werden die Metapher der „Insel" bzw. der „Insularit{\"a}t" anders beschrieben. Erste Untersuchungen der Metapher der „Insel" bzw. der „Insularit{\"a}t" finden sich in den Texten Noche insular (Lezama Lima 2000) und La isla en peso (Pi{\~n}era 1998). Die Metapher wird in den Begrifflichkeiten der „Simulation" und „Dissimulation" (Sarduy 1982) oder auch einer „visuellen Erscheinung" als „Grund-Ekphrasis" (Pimentel 2001) beschrieben. Demgegen{\"u}ber stellen sp{\"a}tere Arbeiten die literarische Figur der „Insel" als ein Instrument der Dekonstruktion der Nationalliteratur Kubas dar (Rojas 1998; Nuez 1998, Benitez Rojo 1998). In zeitgen{\"o}ssischen Analysen wird die Metapher in ihrer jeweiligen Beziehungen zur Repr{\"a}sentation und zum „Lebenswissen" (Ette 2010) herausgearbeitet. Die Repr{\"a}sentation der "Insel" bzw. der "Insularit{\"a}t" wird in der vorliegenden Arbeit anhand des soziokulturellen Kontextes in den letzten dreißig Jahren u.a. in den Romanen von Abilio Estevez Tuyo es el reino (1998), Atilio Caballero La {\´u}ltima playa (1999), Daniel D{\´i}az Mantilla Regreso a Utop{\´i}a (2007) sowie den Erz{\"a}hlungen von Ena Lucia Portela Huracan (2000), Antonio Jos{\´e} Ponte Un nuevo arte de hacer ruinas (2005), Emerio Medina Isla (2005), Orlando Lu{\´i}s Pardo Tokionama (2009), Ahmel Echeverria Isla (2014) und Anesly Negr{\´i}n Isla a mediod{\´i}a (2014) untersucht.}, language = {es} } @phdthesis{Schlenter2019, author = {Schlenter, Judith}, title = {Predictive language processing in late bilinguals}, doi = {10.25932/publishup-43249}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432498}, school = {Universit{\"a}t Potsdam}, pages = {251}, year = {2019}, abstract = {The current thesis examined how second language (L2) speakers of German predict upcoming input during language processing. Early research has shown that the predictive abilities of L2 speakers relative to L1 speakers are limited, resulting in the proposal of the Reduced Ability to Generate Expectations (RAGE) hypothesis. Considering that prediction is assumed to facilitate language processing in L1 speakers and probably plays a role in language learning, the assumption that L1/L2 differences can be explained in terms of different processing mechanisms is a particularly interesting approach. However, results from more recent studies on the predictive processing abilities of L2 speakers have indicated that the claim of the RAGE hypothesis is too broad and that prediction in L2 speakers could be selectively limited. In the current thesis, the RAGE hypothesis was systematically put to the test. In this thesis, German L1 and highly proficient late L2 learners of German with Russian as L1 were tested on their predictive use of one or more information sources that exist as cues to sentence interpretation in both languages, to test for selective limits. The results showed that, in line with previous findings, L2 speakers can use the lexical-semantics of verbs to predict the upcoming noun. Here the level of prediction was more systematically controlled for than in previous studies by using verbs that restrict the selection of upcoming nouns to the semantic category animate or inanimate. Hence, prediction in L2 processing is possible. At the same time, this experiment showed that the L2 group was slower/less certain than the L1 group. Unlike previous studies, the experiment on case marking demonstrated that L2 speakers can use this morphosyntactic cue for prediction. Here, the use of case marking was tested by manipulating the word order (Dat > Acc vs. Acc > Dat) in double object constructions after a ditransitive verb. Both the L1 and the L2 group showed a difference between the two word order conditions that emerged within the critical time window for an anticipatory effect, indicating their sensitivity towards case. However, the results for the post-critical time window pointed to a higher uncertainty in the L2 group, who needed more time to integrate incoming information and were more affected by the word order variation than the L1 group, indicating that they relied more on surface-level information. A different cue weighting was also found in the experiment testing whether participants predict upcoming reference based on implicit causality information. Here, an additional child L1 group was tested, who had a lower memory capacity than the adult L2 group, as confirmed by a digit span task conducted with both learner groups. Whereas the children were only slightly delayed compared to the adult L1 group and showed the same effect of condition, the L2 speakers showed an over-reliance on surface-level information (first-mention/subjecthood). Hence, the pattern observed resulted more likely from L1/L2 differences than from resource deficits. The reviewed studies and the experiments conducted show that L2 prediction is affected by a range of factors. While some of the factors can be attributed to more individual differences (e.g., language similarity, slower processing) and can be interpreted by L2 processing accounts assuming that L1 and L2 processing are basically the same, certain limits are better explained by accounts that assume more substantial L1/L2 differences. Crucially, the experimental results demonstrate that the RAGE hypothesis should be refined: Although prediction as a fast-operating mechanism is likely to be affected in L2 speakers, there is no indication that prediction is the dominant source of L1/L2 differences. The results rather demonstrate that L2 speakers show a different weighting of cues and rely more on semantic and surface-level information to predict as well as to integrate incoming information.}, language = {en} } @phdthesis{Sablowski2019, author = {Sablowski, Daniel}, title = {Spectroscopic analysis of the benchmark system Alpha Aurigae}, doi = {10.25932/publishup-43239}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432396}, school = {Universit{\"a}t Potsdam}, pages = {169}, year = {2019}, abstract = {Binaries play an important role in observational and theoretical astrophysics. Since the mass and the chemical composition are key ingredients for stellar evolution, high-resolution spectroscopy is an important and necessary tool to derive those parameters to high confidence in binaries. This involves carefully measured orbital motion by the determination of radial velocity (RV) shifts and sophisticated techniques to derive the abundances of elements within the stellar atmosphere. A technique superior to conventional cross-correlation methods to determine RV shifts in known as spectral disentangling. Hence, a major task of this thesis was the design of a sophisticated software package for this approach. In order to investigate secondary effects, such as flux and line-profile variations, imprinting changes on the spectrum the behavior of spectral disentangling on such variability is a key to understand the derived values, to improve them, and to get information about the variability itself. Therefore, the spectral disentangling code presented in this thesis and available to the community combines multiple advantages: separation of the spectra for detailed chemical analysis, derivation of orbital elements, derivation of individual RVs in order to investigate distorted systems (either by third body interaction or relativistic effects), the suppression of telluric contaminations, the derivation of variability, and the possibility to apply the technique to eclipsing binaries (important for orbital inclination) or in general to systems that undergo flux-variations. This code in combination with the spectral synthesis codes MOOG and SME was used in order to derive the carbon 12C/13C isotope ratio (CIR) of the benchmark binary Capella. The observational result will be set into context with theoretical evolution by the use of MESA models and resolves the discrepancy of theory and observations existing since the first measurement of Capella's CIR in 1976. The spectral disentangling code has been made available to the community and its applicability to completely different behaving systems, Wolf-Rayet stars, have also been investigated and resulted in a published article. Additionally, since this technique relies strongly on data quality, continues development of scientific instruments to achieve best observational data is of great importance in observational astrophysics. That is the reason why there has also been effort in astronomical instrumentation during the work on this thesis.}, language = {en} } @phdthesis{Brechun2019, author = {Brechun, Katherine E.}, title = {Development and application of genetic networks for engineering photo-controlled proteins}, doi = {10.25932/publishup-43092}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-430924}, school = {Universit{\"a}t Potsdam}, pages = {xxiv, 195}, year = {2019}, abstract = {Light-switchable proteins are being used increasingly to understand and manipulate complex molecular systems. The success of this approach has fueled the development of tailored photo-switchable proteins, to enable targeted molecular events to be studied using light. The development of novel photo-switchable tools has to date largely relied on rational design. Complementing this approach with directed evolution would be expected to facilitate these efforts. Directed evolution, however, has been relatively infrequently used to develop photo-switchable proteins due to the challenge presented by high-throughput evaluation of switchable protein activity. This thesis describes the development of two genetic circuits that can be used to evaluate libraries of switchable proteins, enabling optimization of both the on- and off-states. A screening system is described, which permits detection of DNA-binding activity based on conditional expression of a fluorescent protein. In addition, a tunable selection system is presented, which allows for the targeted selection of protein-protein interactions of a desired affinity range. This thesis additionally describes the development and characterization of a synthetic protein that was designed to investigate chromophore reconstitution in photoactive yellow protein (PYP), a promising scaffold for engineering photo-controlled protein tools.}, language = {en} } @phdthesis{SchulteOsseili2019, author = {Schulte-Osseili, Christine}, title = {Vom Monomer zum Glykopolymer}, doi = {10.25932/publishup-43216}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432169}, school = {Universit{\"a}t Potsdam}, pages = {xiii, 149}, year = {2019}, abstract = {Glykopolymere sind synthetische und nat{\"u}rlich vorkommende Polymere, die eine Glykaneinheit in der Seitenkette des Polymers tragen. Glykane sind durch die Glykan-Protein-Wechselwirkung verantwortlich f{\"u}r viele biologische Prozesse. Die Beteiligung der Glykanen in diesen biologischen Prozessen erm{\"o}glicht das Imitieren und Analysieren der Wechselwirkungen durch geeignete Modellverbindungen, z.B. der Glykopolymere. Dieses System der Glykan-Protein-Wechselwirkung soll durch die Glykopolymere untersucht und studiert werden, um die spezifische und selektive Bindung der Proteine an die Glykopolymere nachzuweisen. Die Proteine, die in der Lage sind, Kohlenhydratstrukturen selektiv zu binden, werden Lektine genannt. In dieser Dissertationsarbeit wurden verschiedene Glykopolymere synthetisiert. Dabei sollte auf einen effizienten und kosteng{\"u}nstigen Syntheseweg geachtet werden. Verschiedene Glykopolymere wurden durch funktionalisierte Monomere mit verschiedenen Zuckern, wie z.B. Mannose, Laktose, Galaktose oder N-Acetyl-Glukosamin als funktionelle Gruppe, hergestellt. Aus diesen funktionalisierten Glykomonomeren wurden {\"u}ber ATRP und RAFT-Polymerisation Glykopolymere synthetisiert. Die erhaltenen Glykopolymere wurden in Diblockcopolymeren als hydrophiler Block angewendet und die Selbstassemblierung in w{\"a}ssriger L{\"o}sung untersucht. Die Polymere formten in w{\"a}ssriger L{\"o}sung Mizellen, bei denen der Zuckerblock an der Oberfl{\"a}che der Mizellen sitzt. Die Mizellen wurden mit einem hydrophoben Fluoreszenzfarbstoff beladen, wodurch die CMC der Mizellenbildung bestimmt werden konnte. Außerdem wurden die Glykopolymere als Oberfl{\"a}chenbeschichtung {\"u}ber „Grafting from" mit SI-ATRP oder {\"u}ber „Grafting to" auf verschiedene Oberfl{\"a}chen gebunden. Durch die glykopolymerbschichteten Oberfl{\"a}chen konnte die Glykan Protein Wechselwirkung {\"u}ber spektroskopische Messmethoden, wie SPR- und Mikroring Resonatoren untersucht werden. Hierbei wurde die spezifische und selektive Bindung der Lektine an die Glykopolymere nachgewiesen und die Bindungsst{\"a}rke untersucht. Die synthetisierten Glykopolymere k{\"o}nnten durch Austausch der Glykaneinheit f{\"u}r andere Lektine adressierbar werden und damit ein weites Feld an anderen Proteinen erschließen. Die biovertr{\"a}glichen Glykopolymere w{\"a}ren alternativen f{\"u}r den Einsatz in biologischen Prozessen als Transporter von Medikamenten oder Farbstoffe in den K{\"o}rper. Außerdem k{\"o}nnten die funktionalisierten Oberfl{\"a}chen in der Diagnostik zum Erkennen von Lektinen eingesetzt werden. Die Glykane, die keine selektive und spezifische Bindung zu Proteinen eingehen, k{\"o}nnten als antiadsorptive Oberfl{\"a}chenbeschichtung z.B. in der Zellbiologie eingesetzt werden.}, language = {de} } @phdthesis{AlHalbouni2019, author = {Al-Halbouni, Djamil}, title = {Photogrammetry and distinct element geomechanical modelling of sinkholes and large-scale karstic depressions}, doi = {10.25932/publishup-43215}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-432159}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2019}, abstract = {Sinkholes and depressions are typical landforms of karst regions. They pose a considerable natural hazard to infrastructure, agriculture, economy and human life in affected areas worldwide. The physio-chemical processes of sinkholes and depression formation are manifold, ranging from dissolution and material erosion in the subsurface to mechanical subsidence/failure of the overburden. This thesis addresses the mechanisms leading to the development of sinkholes and depressions by using complementary methods: remote sensing, distinct element modelling and near-surface geophysics. In the first part, detailed information about the (hydro)-geological background, ground structures, morphologies and spatio-temporal development of sinkholes and depressions at a very active karst area at the Dead Sea are derived from satellite image analysis, photogrammetry and geologic field surveys. There, clusters of an increasing number of sinkholes have been developing since the 1980s within large-scale depressions and are distributed over different kinds of surface materials: clayey mud, sandy-gravel alluvium and lacustrine evaporites (salt). The morphology of sinkholes differs depending in which material they form: Sinkholes in sandy-gravel alluvium and salt are generally deeper and narrower than sinkholes in the interbedded evaporite and mud deposits. From repeated aerial surveys, collapse precursory features like small-scale subsidence, individual holes and cracks are identified in all materials. The analysis sheds light on the ongoing hazardous subsidence process, which is driven by the base-level fall of the Dead Sea and by the dynamic formation of subsurface water channels. In the second part of this thesis, a novel, 2D distinct element geomechanical modelling approach with the software PFC2D-V5 to simulating individual and multiple cavity growth and sinkhole and large-scale depression development is presented. The approach involves a stepwise material removal technique in void spaces of arbitrarily shaped geometries and is benchmarked by analytical and boundary element method solutions for circular cavities. Simulated compression and tension tests are used to calibrate model parameters with bulk rock properties for the materials of the field site. The simulations show that cavity and sinkhole evolution is controlled by material strength of both overburden and cavity host material, the depth and relative speed of the cavity growth and the developed stress pattern in the subsurface. Major findings are: (1) A progressively deepening differential subrosion with variable growth speed yields a more fragmented stress pattern with stress interaction between the cavities. It favours multiple sinkhole collapses and nesting within large-scale depressions. (2) Low-strength materials do not support large cavities in the material removal zone, and subsidence is mainly characterised by gradual sagging into the material removal zone with synclinal bending. (3) High-strength materials support large cavity formation, leading to sinkhole formation by sudden collapse of the overburden. (4) Large-scale depression formation happens either by coalescence of collapsing holes, block-wise brittle failure, or gradual sagging and lateral widening. The distinct element based approach is compared to results from remote sensing and geophysics at the field site. The numerical simulation outcomes are generally in good agreement with derived morphometrics, documented surface and subsurface structures as well as seismic velocities. Complementary findings on the subrosion process are provided from electric and seismic measurements in the area. Based on the novel combination of methods in this thesis, a generic model of karst landform evolution with focus on sinkhole and depression formation is developed. A deepening subrosion system related to preferential flow paths evolves and creates void spaces and subsurface conduits. This subsequently leads to hazardous subsidence, and the formation of sinkholes within large-scale depressions. Finally, a monitoring system for shallow natural hazard phenomena consisting of geodetic and geophysical observations is proposed for similarly affected areas.}, language = {en} }