@article{WeatherillCotton2020, author = {Weatherill, Graeme and Cotton, Fabrice Pierre}, title = {A ground motion logic tree for seismic hazard analysis in the stable cratonic region of Europe}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {18}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {14}, publisher = {Springer Science + Business Media B.V.}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-020-00940-x}, pages = {6119 -- 6148}, year = {2020}, abstract = {Regions of low seismicity present a particular challenge for probabilistic seismic hazard analysis when identifying suitable ground motion models (GMMs) and quantifying their epistemic uncertainty. The 2020 European Seismic Hazard Model adopts a scaled backbone approach to characterise this uncertainty for shallow seismicity in Europe, incorporating region-to-region source and attenuation variability based on European strong motion data. This approach, however, may not be suited to stable cratonic region of northeastern Europe (encompassing Finland, Sweden and the Baltic countries), where exploration of various global geophysical datasets reveals that its crustal properties are distinctly different from the rest of Europe, and are instead more closely represented by those of the Central and Eastern United States. Building upon the suite of models developed by the recent NGA East project, we construct a new scaled backbone ground motion model and calibrate its corresponding epistemic uncertainties. The resulting logic tree is shown to provide comparable hazard outcomes to the epistemic uncertainty modelling strategy adopted for the Eastern United States, despite the different approaches taken. Comparison with previous GMM selections for northeastern Europe, however, highlights key differences in short period accelerations resulting from new assumptions regarding the characteristics of the reference rock and its influence on site amplification.}, language = {en} } @article{vonSpechtCotton2020, author = {von Specht, Sebastian and Cotton, Fabrice Pierre}, title = {A link between machine learning and optimization in ground-motion model development}, series = {Bulletin of the Seismological Society of America}, volume = {110}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120190133}, pages = {2777 -- 2800}, year = {2020}, abstract = {The steady increase of ground-motion data not only allows new possibilities but also comes with new challenges in the development of ground-motion models (GMMs). Data classification techniques (e.g., cluster analysis) do not only produce deterministic classifications but also probabilistic classifications (e.g., probabilities for each datum to belong to a given class or cluster). One challenge is the integration of such continuous classification in regressions for GMM development such as the widely used mixed-effects model. We address this issue by introducing an extension of the mixed-effects model to incorporate data weighting. The parameter estimation of the mixed-effects model, that is, fixed-effects coefficients of the GMMs and the random-effects variances, are based on the weighted likelihood function, which also provides analytic uncertainty estimates. The data weighting permits for earthquake classification beyond the classical, expert-driven, binary classification based, for example, on event depth, distance to trench, style of faulting, and fault dip angle. We apply Angular Classification with Expectation-maximization, an algorithm to identify clusters of nodal planes from focal mechanisms to differentiate between, for example, interface- and intraslab-type events. Classification is continuous, that is, no event belongs completely to one class, which is taken into account in the ground-motion modeling. The theoretical framework described in this article allows for a fully automatic calibration of ground-motion models using large databases with automated classification and processing of earthquake and ground-motion data. As an example, we developed a GMM on the basis of the GMM by Montalva et al. (2017) with data from the strong-motion flat file of Bastias and Montalva (2016) with similar to 2400 records from 319 events in the Chilean subduction zone. Our GMM with the data-driven classification is comparable to the expert-classification-based model. Furthermore, the model shows temporal variations of the between-event residuals before and after large earthquakes in the region.}, language = {en} } @article{KothaCottonBindi2018, author = {Kotha, Sreeram Reddy and Cotton, Fabrice Pierre and Bindi, Dino}, title = {A new approach to site classification}, series = {Soil Dynamics and Earthquake Engineering}, volume = {110}, journal = {Soil Dynamics and Earthquake Engineering}, publisher = {Elsevier}, address = {Oxford}, issn = {0267-7261}, doi = {10.1016/j.soildyn.2018.01.051}, pages = {318 -- 329}, year = {2018}, abstract = {With increasing amount of strong motion data, Ground Motion Prediction Equation (GMPE) developers are able to quantify empirical site amplification functions (delta S2S(s)) from GMPE residuals, for use in site-specific Probabilistic Seismic Hazard Assessment. In this study, we first derive a GMPE for 5\% damped Pseudo Spectral Acceleration (g) of Active Shallow Crustal earthquakes in Japan with 3.4 <= M-w <= 7.3 and 0 <= R-JB <= 600km. Using k-mean spectral clustering technique, we then classify our estimated delta S2S(s)(T = 0.01 - 2s) of 588 wellcharacterized sites, into 8 site clusters with distinct mean site amplification functions, and within-cluster site-tosite variability similar to 50\% smaller than the overall dataset variability (phi(S2S)). Following an evaluation of existing schemes, we propose a revised data-driven site classification characterized by kernel density distributions of V-s30, V-s10, H-800, and predominant period (T-G) of the site clusters.}, language = {en} } @article{YepesAudinAlvaradoetal.2016, author = {Yepes, Hugo and Audin, Laurence and Alvarado, Alexandra and Beauval, Celine and Aguilar, Jorge and Font, Yvonne and Cotton, Fabrice Pierre}, title = {A new view for the geodynamics of Ecuador: Implication in seismogenic source definition and seismic hazard assessment}, series = {Tectonics}, volume = {35}, journal = {Tectonics}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0278-7407}, doi = {10.1002/2015TC003941}, pages = {1249 -- 1279}, year = {2016}, abstract = {A new view of Ecuador's complex geodynamics has been developed in the course of modeling seismic source zones for probabilistic seismic hazard analysis. This study focuses on two aspects of the plates' interaction at a continental scale: (a) age-related differences in rheology between Farallon and Nazca plates—marked by the Grijalva rifted margin and its inland projection—as they subduct underneath central Ecuador, and (b) the rapidly changing convergence obliquity resulting from the convex shape of the South American northwestern continental margin. Both conditions satisfactorily explain several characteristics of the observed seismicity and of the interseismic coupling. Intermediate-depth seismicity reveals a severe flexure in the Farallon slab as it dips and contorts at depth, originating the El Puyo seismic cluster. The two slabs position and geometry below continental Ecuador also correlate with surface expressions observable in the local and regional geology and tectonics. The interseismic coupling is weak and shallow south of the Grijalva rifted margin and increases northward, with a heterogeneous pattern locally associated to the Carnegie ridge subduction. High convergence obliquity is responsible for the North Andean Block northeastward movement along localized fault systems. The Cosanga and Pallatanga fault segments of the North Andean Block-South American boundary concentrate most of the seismic moment release in continental Ecuador. Other inner block faults located along the western border of the inter-Andean Depression also show a high rate of moderate-size earthquake production. Finally, a total of 19 seismic source zones were modeled in accordance with the proposed geodynamic and neotectonic scheme.}, language = {en} } @article{AikenAikenCotton2018, author = {Aiken, John M. and Aiken, Chastity and Cotton, Fabrice Pierre}, title = {A python library for teaching computation to seismology students}, series = {Seismological research letters}, volume = {89}, journal = {Seismological research letters}, number = {3}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0895-0695}, doi = {10.1785/0220170246}, pages = {1165 -- 1171}, year = {2018}, abstract = {Python is at the forefront of scientific computation for seismologists and therefore should be introduced to students interested in becoming seismologists. On its own, Python is open source and well designed with extensive libraries. However, Python code can also be executed, visualized, and communicated to others with "Jupyter Notebooks". Thus, Jupyter Notebooks are ideal for teaching students Python and scientific computation. In this article, we designed an openly available Python library and collection of Jupyter Notebooks based on defined scientific computation learning goals for seismology students. The Notebooks cover topics from an introduction to Python to organizing data, earthquake catalog statistics, linear regression, and making maps. Our Python library and collection of Jupyter Notebooks are meant to be used as course materials for an upper-division data analysis course in an Earth Science Department, and the materials were tested in a Probabilistic Seismic Hazard course. However, seismologists or anyone else who is interested in Python for data analysis and map making can use these materials.}, language = {en} } @article{BayonaViverosvonSpechtStraderetal.2019, author = {Bayona Viveros, Jose Antonio and von Specht, Sebastian and Strader, Anne and Hainzl, Sebastian and Cotton, Fabrice Pierre and Schorlemmer, Danijel}, title = {A Regionalized Seismicity Model for Subduction Zones Based on Geodetic Strain Rates, Geomechanical Parameters, and Earthquake-Catalog Data}, series = {Bulletin of the Seismological Society of America}, volume = {109}, journal = {Bulletin of the Seismological Society of America}, number = {5}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120190034}, pages = {2036 -- 2049}, year = {2019}, abstract = {The Seismic Hazard Inferred from Tectonics based on the Global Strain Rate Map (SHIFT_GSRM) earthquake forecast was designed to provide high-resolution estimates of global shallow seismicity to be used in seismic hazard assessment. This model combines geodetic strain rates with global earthquake parameters to characterize long-term rates of seismic moment and earthquake activity. Although SHIFT_GSRM properly computes seismicity rates in seismically active continental regions, it underestimates earthquake rates in subduction zones by an average factor of approximately 3. We present a complementary method to SHIFT_GSRM to more accurately forecast earthquake rates in 37 subduction segments, based on the conservation of moment principle and the use of regional interface seismicity parameters, such as subduction dip angles, corner magnitudes, and coupled seismogenic thicknesses. In seven progressive steps, we find that SHIFT_GSRM earthquake-rate underpredictions are mainly due to the utilization of a global probability function of seismic moment release that poorly captures the great variability among subduction megathrust interfaces. Retrospective test results show that the forecast is consistent with the observations during the 1 January 1977 to 31 December 2014 period. Moreover, successful pseudoprospective evaluations for the 1 January 2015 to 31 December 2018 period demonstrate the power of the regionalized earthquake model to properly estimate subduction-zone seismicity.}, language = {en} } @article{ChenWeatherillPaganietal.2018, author = {Chen, Yen-Shin and Weatherill, Graeme and Pagani, Marco and Cotton, Fabrice Pierre}, title = {A transparent and data-driven global tectonic regionalization model for seismic hazard assessment}, series = {Geophysical journal international}, volume = {213}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggy005}, pages = {1263 -- 1280}, year = {2018}, abstract = {A key concept that is common to many assumptions inherent within seismic hazard assessment is that of tectonic similarity. This recognizes that certain regions of the globe may display similar geophysical characteristics, such as in the attenuation of seismic waves, the magnitude scaling properties of seismogenic sources or the seismic coupling of the lithosphere. Previous attempts at tectonic regionalization, particularly within a seismic hazard assessment context, have often been based on expert judgements; in most of these cases, the process for delineating tectonic regions is neither reproducible nor consistent from location to location. In this work, the regionalization process is implemented in a scheme that is reproducible, comprehensible from a geophysical rationale, and revisable when new relevant data are published. A spatial classification-scheme is developed based on fuzzy logic, enabling the quantification of concepts that are approximate rather than precise. Using the proposed methodology, we obtain a transparent and data-driven global tectonic regionalization model for seismic hazard applications as well as the subjective probabilities (e.g. degree of being active/degree of being cratonic) that indicate the degree to which a site belongs in a tectonic category.}, language = {en} } @article{DurandBentzKwiateketal.2020, author = {Durand, Virginie and Bentz, Stephan and Kwiatek, Grzegorz and Dresen, Georg and Wollin, Christopher and Heidbach, Oliver and Martinez-Garzon, Patricia and Cotton, Fabrice Pierre and Nurlu, Murat and Bohnhoff, Marco}, title = {A two-scale preparation phase preceded an M-w 5.8 earthquake in the sea of marmara offshore Istanbul, Turkey}, series = {Seismological research letters}, volume = {91}, journal = {Seismological research letters}, number = {6}, address = {Boulder}, issn = {0895-0695}, doi = {10.1785/0220200110}, pages = {3139 -- 3147}, year = {2020}, abstract = {We analyze the spatiotemporal evolution of seismicity during a sequence of moderate (an M-w 4.7 foreshock and M-w 5.8 mainshock) earthquakes occurring in September 2019 at the transition between a creeping and a locked segment of the North Anatolian fault in the central Sea of Marmara, northwest Turkey. To investigate in detail the seismicity evolution, we apply a matched-filter technique to continuous waveforms, thus reducing the magnitude threshold for detection. Sequences of foreshocks preceding the two largest events are clearly seen, exhibiting two different behaviors: a long-term activation of the seismicity along the entire fault segment and a short-term concentration around the epicenters of the large events. We suggest a two-scale preparation phase, with aseismic slip preparing the mainshock final rupture a few days before, and a cascade mechanism leading to the nucleation of the mainshock. Thus, our study shows a combination of seismic and aseismic slip during the foreshock sequence changing the strength of the fault, bringing it closer to failure.}, language = {en} } @article{SocquetValdesJaraetal.2017, author = {Socquet, Anne and Valdes, Jesus Pina and Jara, Jorge and Cotton, Fabrice Pierre and Walpersdorf, Andrea and Cotte, Nathalie and von Specht, Sebastian and Ortega-Culaciati, Francisco and Carrizo, Daniel and Norabuena, Edmundo}, title = {An 8month slow slip event triggers progressive nucleation of the 2014 Chile megathrust}, series = {Geophysical research letters}, volume = {44}, journal = {Geophysical research letters}, publisher = {American Geophysical Union}, address = {Washington}, issn = {0094-8276}, doi = {10.1002/2017GL073023}, pages = {4046 -- 4053}, year = {2017}, abstract = {The mechanisms leading to large earthquakes are poorly understood and documented. Here we characterize the long-term precursory phase of the 1 April 2014 M(w)8.1 North Chile megathrust. We show that a group of coastal GPS stations accelerated westward 8months before the main shock, corresponding to a M(w)6.5 slow slip event on the subduction interface, 80\% of which was aseismic. Concurrent interface foreshocks underwent a diminution of their radiation at high frequency, as shown by the temporal evolution of Fourier spectra and residuals with respect to ground motions predicted by recent subduction models. Such ground motions change suggests that in response to the slow sliding of the subduction interface, seismic ruptures are progressively becoming smoother and/or slower. The gradual propagation of seismic ruptures beyond seismic asperities into surrounding metastable areas could explain these observations and might be the precursory mechanism eventually leading to the main shock.}, language = {en} } @article{ZiebarthvonSpechtHeidbachetal.2020, author = {Ziebarth, Malte J. and von Specht, Sebastian and Heidbach, Oliver and Cotton, Fabrice Pierre and Anderson, John G.}, title = {Applying conservation of energy to estimate earthquake frequencies from strain rates and stresses}, series = {Journal of geophysical research : Solid earth}, volume = {125}, journal = {Journal of geophysical research : Solid earth}, number = {8}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1029/2020JB020186}, pages = {25}, year = {2020}, abstract = {Estimating earthquake occurrence rates from the accumulation rate of seismic moment is an established tool of seismic hazard analysis. We propose an alternative, fault-agnostic approach based on the conservation of energy: the Energy-Conserving Seismicity Framework (ENCOS). Working in energy space has the advantage that the radiated energy is a better predictor of the damage potential of earthquake waves than the seismic moment release. In a region, ENCOS balances the stationary power available to cause earthquakes with the long-term seismic energy release represented by the energy-frequency distribution's first moment. Accumulation and release are connected through the average seismic efficiency, by which we mean the fraction of released energy that is converted into seismic waves. Besides measuring earthquakes in energy, ENCOS differs from moment balance essentially in that the energy accumulation rate depends on the total stress in addition to the strain rate tensor. To validate ENCOS, we exemplarily model the energy-frequency distribution around Southern California. We estimate the energy accumulation rate due to tectonic loading assuming poroelasticity and hydrostasis. Using data from the World Stress Map and assuming the frictional limit to estimate the stress tensor, we obtain a power of 0.8 GW. The uncertainty range, 0.3-2.0GW, originates mainly from the thickness of the seismogenic crust, the friction coefficient on preexisting faults, and models of Global Positioning System (GPS) derived strain rates. Based on a Gutenberg-Richter magnitude-frequency distribution, this power can be distributed over a range of energies consistent with historical earthquake rates and reasonable bounds on the seismic efficiency.}, language = {en} } @article{PilzCottonZaccarellietal.2019, author = {Pilz, Marco and Cotton, Fabrice Pierre and Zaccarelli, Riccardo and Bindi, Dino}, title = {Capturing Regional Variations of Hard-Rock Attenuation in Europe}, series = {Bulletin of the Seismological Society of America}, volume = {109}, journal = {Bulletin of the Seismological Society of America}, number = {4}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120190023}, pages = {1401 -- 1418}, year = {2019}, abstract = {A proper assessment of seismic reference site conditions has important applications as they represent the basis on which ground motions and amplifications are generally computed. Besides accounting for the average S-wave velocity over the uppermost 30 m (V-S30), the parameterization of high-frequency ground motions beyond source-corner frequency received significant attention. kappa, an empirical parameter introduced by Anderson and Hough (1984), is often used to represent the spectral decay of the acceleration spectrum at high frequencies. The lack of hard-rock records and the poor understanding of the physics of kappa introduced significant epistemic uncertainty in the final seismic hazard of recent projects. Thus, determining precise and accurate regional hard-rock kappa(0) values is critical. We propose an alternative procedure for capturing the reference kappa(0) on regional scales by linking thewell-known high-frequency attenuation parameter kappa and the properties of multiple-scattered coda waves. Using geological and geophysical data around more than 1300 stations for separating reference and soft soil sites and based on more than 10,000 crustal earthquake recordings, we observe that kappa(0) from multiple-scattered coda waves seems to be independent of the soil type but correlated with the hard-rock kappa(0), showing significant regional variations across Europe. The values range between 0.004 s for northern Europe and 0.020 s for the southern and southeastern parts. On the other hand, measuring kappa (and correspondingly kappa(0)) on the S-wave window (as classically proposed), the results are strongly affected by transmitted (reflected, refracted, and scattered) waves included in the analyzed window biasing the proper assessment of kappa(0). This effect is more pronounced for soft soil sites. In this way, kappa(coda)(0) can serve as a proxy for the regional hard-rock kappa(0) at the reference sites.}, language = {en} } @article{MayorBoraCotton2018, author = {Mayor, Jessie and Bora, Sanjay Singh and Cotton, Fabrice Pierre}, title = {Capturing regional variations of hard-rock κ0 from coda analysis}, series = {The bulletin of the Seismological Society of America : BSSA}, volume = {108}, journal = {The bulletin of the Seismological Society of America : BSSA}, number = {1}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120170153}, pages = {399 -- 408}, year = {2018}, abstract = {We propose an alternative procedure for the capture of the hard-rock regional kappa (⁠κ0ref⁠). In our approach, we make use of a potential link between the well-known κ parameter and the properties of coda waves. In our analysis, we consider near-distance records of four crustal earthquakes of local magnitude 3.7-4.9 that occurred in four regions of France in different geological contexts: the crystalline axial chain of Pyrenees to the southwest, the large sedimentary basin to the southeast, the Alpine range to the east, and the extensional Rhine graben to the northeast. Each earthquake has been recorded at a pair of nearby soft- and hard-rock station sites. The high-frequency (16-32 Hz) spectral amplitudes of the coda window (carefully selected on the time series of the accelerograms) confirm an exponential decrease, which we quantify by κAHcoda and call "kappa of coda." It is found that κAHcoda is independent of the soil type but shows significant regional variations. κ measurements (Anderson and Hough, 1984) over the coda window (⁠κAHcoda⁠) and full time series (⁠κAH⁠) show strong correlation at hard-rock sites. This suggests that κAHcoda can provide a new proxy to estimate the regional hard rock κ0ref (Ktenidou et al., 2015). Theoretical analysis is also presented to relate the regional κAHcoda and coda quality factor Qc⁠, which quantifies the average attenuation properties of the crust (both scattering and absorption). It allows interpreting κAHcoda as the time spent by the waves in the medium, weighted by its attenuation properties. This theoretical analysis also shows that the classical κ measurement should be frequency dependent; this was confirmed by the spectra of the observed records.}, language = {en} } @article{DouglasAkkarAmerietal.2014, author = {Douglas, John and Akkar, Sinan and Ameri, Gabriele and Bard, Pierre-Yves and Bindi, Dino and Bommer, Julian J. and Bora, Sanjay Singh and Cotton, Fabrice Pierre and Derras, Boumediene and Hermkes, Marcel and Kuehn, Nicolas Martin and Luzi, Lucia and Massa, Marco and Pacor, Francesca and Riggelsen, Carsten and Sandikkaya, M. Abdullah and Scherbaum, Frank and Stafford, Peter J. and Traversa, Paola}, title = {Comparisons among the five ground-motion models developed using RESORCE for the prediction of response spectral accelerations due to earthquakes in Europe and the Middle East}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {12}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {1}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-013-9522-8}, pages = {341 -- 358}, year = {2014}, abstract = {This article presents comparisons among the five ground-motion models described in other articles within this special issue, in terms of data selection criteria, characteristics of the models and predicted peak ground and response spectral accelerations. Comparisons are also made with predictions from the Next Generation Attenuation (NGA) models to which the models presented here have similarities (e.g. a common master database has been used) but also differences (e.g. some models in this issue are nonparametric). As a result of the differing data selection criteria and derivation techniques the predicted median ground motions show considerable differences (up to a factor of two for certain scenarios), particularly for magnitudes and distances close to or beyond the range of the available observations. The predicted influence of style-of-faulting shows much variation among models whereas site amplification factors are more similar, with peak amplification at around 1s. These differences are greater than those among predictions from the NGA models. The models for aleatory variability (sigma), however, are similar and suggest that ground-motion variability from this region is slightly higher than that predicted by the NGA models, based primarily on data from California and Taiwan.}, language = {en} } @article{ScherbaumBommerBungumetal.2005, author = {Scherbaum, Frank and Bommer, Julian J. and Bungum, Hilmar and Cotton, Fabrice Pierre and Abrahamson, Norman A.}, title = {Composite ground-motion models and logic trees: Methodology, sensitivities, and uncertainties}, issn = {0037-1106}, year = {2005}, abstract = {Logic trees have become a popular tool in seismic hazard studies. Commonly, the models corresponding to the end branches of the complete logic tree in a probabalistic seismic hazard analysis (PSHA) are treated separately until the final calculation of the set of hazard curves. This comes at the price that information regarding sensitivities and uncertainties in the ground-motion sections of the logic tree are only obtainable after disaggregation. Furthermore, from this end-branch model perspective even the designers of the logic tree cannot directly tell what ground-motion scenarios most likely would result from their logic trees for a given earthquake at a particular distance, nor how uncertain these scenarios might be or how they would be affected by the choices of the hazard analyst. On the other hand, all this information is already implicitly present in the logic tree. Therefore, with the ground-motion perspective that we propose in the present article, we treat the ground-motion sections of a complete logic tree for seismic hazard as a single composite model representing the complete state-of-knowledge-and-belief of a particular analyst on ground motion in a particular target region. We implement this view by resampling the ground-motion models represented in the ground-motion sections of the logic tree by Monte Carlo simulation (separately for the median values and the sigma values) and then recombining the sets of simulated values in proportion to their logic-tree branch weights. The quantiles of this resampled composite model provide the hazard analyst and the decision maker with a simple, clear, and quantitative representation of the overall physical meaning of the ground-motion section of a logic tree and the accompanying epistemic uncertainty. Quantiles of the composite model also provide an easy way to analyze the sensitivities and uncertainties related to a given logic-tree model. We illustrate this for a composite ground- motion model for central Europe. Further potential fields of applications are seen wherever individual best estimates of ground motion have to be derived from a set of candidate models, for example, for hazard rnaps, sensitivity studies, or for modeling scenario earthquakes}, language = {en} } @misc{DahmHeimannFunkeetal.2018, author = {Dahm, Torsten and Heimann, Sebastian and Funke, Sigward and Wendt, Siegfried and Rappsilber, Ivo and Bindi, Dino and Plenefisch, Thomas and Cotton, Fabrice Pierre}, title = {Correction to: Seismicity in the block mountains between Halle and Leipzig, Central Germany: centroid moment tensors, ground motion simulation, and felt intensities of two M approximate to 3 earthquakes in 2015 and 2017 (vol 22, pg 985, 2018)}, series = {Journal of seismology}, volume = {22}, journal = {Journal of seismology}, number = {6}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-018-9773-6}, pages = {1669 -- 1671}, year = {2018}, language = {en} } @misc{GruenthalStromeyerBosseetal.2018, author = {Gr{\"u}nthal, Gottfried and Stromeyer, Dietrich and Bosse, Christian and Cotton, Fabrice Pierre and Bindi, Dino}, title = {Correction to: The probabilistic seismic hazard assessment of Germanyversion 2016, considering the range of epistemic uncertainties and aleatory variability (vol 16, pg 4339, 2018)}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {16}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {10}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-018-0398-5}, pages = {4397 -- 4398}, year = {2018}, abstract = {One paragraph of the manuscript of the paper has been inadvertently omitted in the very final stage of its compilation due to a technical mistake. Since this paragraph discusses the declustering of the used earthquake catalogue and is therefore necessary for the understanding of the seismicity data preprocessing, the authors decided to provide this paragraph in form of a correction. The respective paragraph belongs to chapter 2 of the paper, where it was placed originally, and should be inserted into the published paper before the second to the last paragraph. The omitted text reads as follows:}, language = {en} } @misc{JaraSanchezReyesSocquetetal.2018, author = {Jara, Jorge and S{\´a}nchez-Reyes, Hugo and Socquet, Anne and Cotton, Fabrice Pierre and Virieux, Jean and Maksymowicz, Andrei and D{\´i}az-Mojica, John and Walpersdorf, Andrea and Ruiz, Javier and Cotte, Nathalie and Norabuena, Edmundo}, title = {Corrigendum to: Kinematic study of Iquique 2014 Mw 8.1 earthquake: Understanding the segmentation of the seismogenic zone. - (Earth and planetary science letters. - 503 (2018) S. 131 - 143)}, series = {Earth and planetary science letters}, volume = {506}, journal = {Earth and planetary science letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2018.11.026}, pages = {347 -- 347}, year = {2018}, abstract = {We study the rupture processes of Iquique earthquake 8.1 (2014/04/01) and its largest aftershock 7.7 (2014/04/03) that ruptured the North Chile subduction zone. High-rate Global Positioning System (GPS) recordings and strong motion data are used to reconstruct the evolution of the slip amplitude, rise time and rupture time of both earthquakes. A two-step inversion scheme is assumed, by first building prior models for both earthquakes from the inversion of the estimated static displacements and then, kinematic inversions in the frequency domain are carried out taken into account this prior information. The preferred model for the mainshock exhibits a seismic moment of 1.73 × 1021 Nm ( 8.1) and maximum slip of ∼9 m, while the aftershock model has a seismic moment of 3.88 × 1020 ( 7.7) and a maximum slip of ∼3 m. For both earthquakes, the final slip distributions show two asperities (a shallow one and a deep one) separated by an area with significant slip deficit. This suggests a segmentation along-dip which might be related to a change of the dipping angle of the subducting slab inferred from gravimetric data. Along-strike, the areas where the seismic ruptures stopped seem to be well correlated with geological features observed from geophysical information (high-resolution bathymetry, gravimetry and coupling maps) that are representative of the long-term segmentation of the subduction margin. Considering the spatially limited portions that were broken by these two earthquakes, our results support the idea that the seismic gap is not filled yet.}, language = {en} } @article{MolkenthinScherbaumGriewanketal.2017, author = {Molkenthin, Christian and Scherbaum, Frank and Griewank, Andreas and Leovey, Hernan and Kucherenko, Sergei and Cotton, Fabrice Pierre}, title = {Derivative-Based Global Sensitivity Analysis: Upper Bounding of Sensitivities in Seismic-Hazard Assessment Using Automatic Differentiation}, series = {Bulletin of the Seismological Society of America}, volume = {107}, journal = {Bulletin of the Seismological Society of America}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120160185}, pages = {984 -- 1004}, year = {2017}, abstract = {Seismic-hazard assessment is of great importance within the field of engineering seismology. Nowadays, it is common practice to define future seismic demands using probabilistic seismic-hazard analysis (PSHA). Often it is neither obvious nor transparent how PSHA responds to changes in its inputs. In addition, PSHA relies on many uncertain inputs. Sensitivity analysis (SA) is concerned with the assessment and quantification of how changes in the model inputs affect the model response and how input uncertainties influence the distribution of the model response. Sensitivity studies are challenging primarily for computational reasons; hence, the development of efficient methods is of major importance. Powerful local (deterministic) methods widely used in other fields can make SA feasible, even for complex models with a large number of inputs; for example, automatic/algorithmic differentiation (AD)-based adjoint methods. Recently developed derivative-based global sensitivity measures can combine the advantages of such local SA methods with efficient sampling strategies facilitating quantitative global sensitivity analysis (GSA) for complex models. In our study, we propose and implement exactly this combination. It allows an upper bounding of the sensitivities involved in PSHA globally and, therefore, an identification of the noninfluential and the most important uncertain inputs. To the best of our knowledge, it is the first time that derivative-based GSA measures are combined with AD in practice. In addition, we show that first-order uncertainty propagation using the delta method can give satisfactory approximations of global sensitivity measures and allow a rough characterization of the model output distribution in the case of PSHA. An illustrative example is shown for the suggested derivative-based GSA of a PSHA that uses stochastic ground-motion simulations.}, language = {en} } @article{ZhuCottonPilz2020, author = {Zhu, Chuanbin and Cotton, Fabrice Pierre and Pilz, Marco}, title = {Detecting site resonant frequency using HVSR}, series = {Bulletin of the Seismological Society of America : BSSA}, volume = {110}, journal = {Bulletin of the Seismological Society of America : BSSA}, number = {2}, publisher = {Seismological Society of America}, address = {El Cerito, Calif.}, issn = {0037-1106}, doi = {10.1785/0120190186}, pages = {427 -- 440}, year = {2020}, abstract = {In this investigation, we examine the uncertainties using the horizontal-to-vertical spectral ratio (HVSR) technique on earthquake recordings to detect site resonant frequencies at 207 KiK-net sites. Our results show that the scenario dependence of response (pseudospectral acceleration) spectral ratio could bias the estimates of resonant frequencies for sites having multiple significant peaks with comparable amplitudes. Thus, the Fourier amplitude spectrum (FAS) should be preferred in computing HVSR. For more than 80\% of the investigated sites, the first peak (in the frequency domain) on the average HVSR curve over multiple sites coincides with the highest peak. However, for sites with multiple peaks, the highest peak frequency (f(p)) is less susceptible to the selection criteria of significant peaks and the extent of smoothing to spectrum than the first peak frequency (f(0)). Meanwhile, in comparison to the surface-to-borehole spectral ratio, f(0) tends to underestimate the predominant frequency (at which the largest amplification occurs) more than f(p). In addition, in terms of characterizing linear site response, f(p) shows a better overall performance than f(0). Based on these findings, we thus recommend that seismic network operators provide f(p) on the average HVSRFAS curve as a priority, ideally together with the average HVSRFAS curve in site characterization.}, language = {en} } @article{PilzCotton2019, author = {Pilz, Marco and Cotton, Fabrice Pierre}, title = {Does the One-Dimensional Assumption Hold for Site Response Analysis?}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {35}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, number = {2}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/050718EQS113M}, pages = {883 -- 905}, year = {2019}, abstract = {The one-dimensional (1-D) approach is still the dominant method to incorporate site effects in engineering applications. To bridge the 1-D to multidimensional site response analysis, we develop quantitative criteria and a reproducible method to identify KiK-net sites with significant deviations from 1-D behavior. We found that 158 out of 354 show two-dimensional (2-D) and three-dimensional (3-D) effects, extending the resonance toward shorter periods at which 2-D or 3-D site effects exceed those of the classic 1-D configurations and imposing an additional amplification to that caused by the impedance contrast alone. Such 2-D and 3-D effects go along with a large within-station ground motion variability. Remarkably, these effects are found to be more pronounced for small impedance contrasts. While it is hardly possible to identify common features in ground motion behavior for stations with similar topography typologies, it is not over-conservative to apply a safety factor to account for 2-D and 3-D site effects in ground motion modeling.}, language = {en} } @article{vonSpechtOeztuerkVehetal.2019, author = {von Specht, Sebastian and {\"O}zt{\"u}rk, Ugur and Veh, Georg and Cotton, Fabrice Pierre and Korup, Oliver}, title = {Effects of finite source rupture on landslide triggering}, series = {Solid earth}, volume = {10}, journal = {Solid earth}, number = {2}, publisher = {Copernicus}, address = {G{\"o}ttingen}, issn = {1869-9510}, doi = {10.5194/se-10-463-2019}, pages = {463 -- 486}, year = {2019}, abstract = {The propagation of a seismic rupture on a fault introduces spatial variations in the seismic wave field surrounding the fault. This directivity effect results in larger shaking amplitudes in the rupture propagation direction. Its seismic radiation pattern also causes amplitude variations between the strike-normal and strike-parallel components of horizontal ground motion. We investigated the landslide response to these effects during the 2016 Kumamoto earthquake (M-w 7.1) in central Kyushu (Japan). Although the distribution of some 1500 earthquake-triggered landslides as a function of rupture distance is consistent with the observed Arias intensity, the landslides were more concentrated to the northeast of the southwest-northeast striking rupture. We examined several landslide susceptibility factors: hillslope inclination, the median amplification factor (MAF) of ground shaking, lithology, land cover, and topographic wetness. None of these factors sufficiently explains the landslide distribution or orientation (aspect), although the landslide head scarps have an elevated hillslope inclination and MAF. We propose a new physics-based ground-motion model (GMM) that accounts for the seismic rupture effects, and we demonstrate that the low-frequency seismic radiation pattern is consistent with the overall landslide distribution. Its spatial pattern is influenced by the rupture directivity effect, whereas landslide aspect is influenced by amplitude variations between the fault-normal and fault-parallel motion at frequencies < 2 Hz. This azimuth dependence implies that comparable landslide concentrations can occur at different distances from the rupture. This quantitative link between the prevalent landslide aspect and the low-frequency seismic radiation pattern can improve coseismic landslide hazard assessment.}, language = {en} } @article{KothaCottonBindi2019, author = {Kotha, Sreeram Reddy and Cotton, Fabrice Pierre and Bindi, Dino}, title = {Empirical models of shear-wave radiation pattern derived from large datasets of ground-shaking observations}, series = {Scientific reports}, volume = {9}, journal = {Scientific reports}, publisher = {Nature Publ. Group}, address = {London}, issn = {2045-2322}, doi = {10.1038/s41598-018-37524-4}, pages = {11}, year = {2019}, abstract = {Shear-waves are the most energetic body-waves radiated from an earthquake, and are responsible for the destruction of engineered structures. In both short-term emergency response and long-term risk forecasting of disaster-resilient built environment, it is critical to predict spatially accurate distribution of shear-wave amplitudes. Although decades' old theory proposes a deterministic, highly anisotropic, four-lobed shear-wave radiation pattern, from lack of convincing evidence, most empirical ground-shaking prediction models settled for an oversimplified stochastic radiation pattern that is isotropic on average. Today, using the large datasets of uniformly processed seismograms from several strike, normal, reverse, and oblique-slip earthquakes across the globe, compiled specifically for engineering applications, we could reveal, quantify, and calibrate the frequency-, distance-, and style-of-faulting dependent transition of shear-wave radiation between a stochastic-isotropic and a deterministic-anisotropic phenomenon. Consequent recalibration of empirical ground-shaking models dramatically improved their predictions: with isodistant anisotropic variations of ±40\%, and 8\% reduction in uncertainty. The outcomes presented here can potentially trigger a reappraisal of several practical issues in engineering seismology, particularly in seismic ground-shaking studies and seismic hazard and risk assessment.}, language = {en} } @article{MussonToroCoppersmithetal.2005, author = {Musson, R. M. W. and Toro, G. R. and Coppersmith, Kevin J. and Bommer, Julian J. and Deichmann, N. and Bungum, Hilmar and Cotton, Fabrice Pierre and Scherbaum, Frank and Slejko, Dario and Abrahamson, Norman A.}, title = {Evaluating hazard results for Switzerland and how not to do it : a discussion of "Problems in the application of the SSHAC probability method for assessing earthquake hazards at Swiss nuclear power plants" by J-U Klugel}, year = {2005}, abstract = {The PEGASOS project was a major international seismic hazard study, one of the largest ever conducted anywhere in the world, to assess seismic hazard at four nuclear power plant sites in Switzerland. Before the report of this project has become publicly available, a paper attacking both methodology and results has appeared. Since the general scientific readership may have difficulty in assessing this attack in the absence of the report being attacked, we supply a response in the present paper. The bulk of the attack, besides some misconceived arguments about the role of uncertainties in seismic hazard analysis, is carried by some exercises that purport to be validation exercises. In practice, they are no such thing; they are merely independent sets of hazard calculations based on varying assumptions and procedures, often rather questionable, which come up with various different answers which have no particular significance. (C) 2005 Elsevier B.V. All rights reserved}, language = {en} } @article{ZhuPilzCotton2020, author = {Zhu, Chuanbin and Pilz, Marco and Cotton, Fabrice Pierre}, title = {Evaluation of a novel application of earthquake HVSR in site-specific amplification estimation}, series = {Soil dynamics and earthquake engineering}, volume = {139}, journal = {Soil dynamics and earthquake engineering}, publisher = {Elsevier}, address = {Oxford}, issn = {0267-7261}, doi = {10.1016/j.soildyn.2020.106301}, pages = {14}, year = {2020}, abstract = {Ground response analyses (GRA) model the vertical propagations of SH waves through flat-layered media (1DSH) and are widely carried out to evaluate local site effects in practice. Horizontal-to-vertical spectral ratio (HVSR) technique is a cost-effective approach to extract certain site-specific information, e.g., site fundamental frequency (f(0)), but HVSR values cannot be directly used to approximate the levels of S-wave amplifications. Motivated by the work of Kawase et al. (2019), we propose a procedure to correct earthquake HVSR amplitudes for direct amplification estimations. The empirical correction compensates HVSR by generic vertical amplification spectra categorized by the vertical fundamental frequency (f(0v)) via kappa-means clustering. In this investigation, we evaluate the effectiveness of the corrected HVSR in approximating observed linear amplifications in comparison with 1DSH modellings. We select a total of 90 KiK-net (Kiban Kyoshin network) surface-downhole sites which are found to have no velocity contrasts below their boreholes and thus of which surface-to-borehole spectral ratios (SBSRs) can be taken as their empirical transfer functions (ETFs). 1DSH-based theoretical transfer functions (TTFs) are computed in the linear domain considering uncertainties in Vs profiles through randomizations. Five goodness-of-fit metrics are adopted to gauge the closeness between observed (ETF) and predicted (i.e., TTF and corrected HVSR) amplifications in both amplitude and spectral shape over frequencies from f(0) to 25 Hz. We find that the empirical correction to HVSR is highly effective and achieves a "good match" in both spectral shape and amplitude at the majority of the 90 KiK-net sites, as opposed to less than one-third for the 1DSH modelling. In addition, the empirical correction does not require a velocity model, which GRAs require, and thus has great potentials in seismic hazard assessments.}, language = {en} } @article{EsfahaniVogelCottonetal.2021, author = {Esfahani, Reza Dokht Dolatabadi and Vogel, Kristin and Cotton, Fabrice Pierre and Ohrnberger, Matthias and Scherbaum, Frank and Kriegerowski, Marius}, title = {Exploring the dimensionality of ground-motion data by applying autoencoder techniques}, series = {Bulletin of the Seismological Society of America : BSSA}, volume = {111}, journal = {Bulletin of the Seismological Society of America : BSSA}, number = {3}, publisher = {Seismological Society of America}, address = {El Cerito, Calif.}, issn = {0037-1106}, doi = {10.1785/0120200285}, pages = {1563 -- 1576}, year = {2021}, abstract = {In this article, we address the question of how observed ground-motion data can most effectively be modeled for engineering seismological purposes. Toward this goal, we use a data-driven method, based on a deep-learning autoencoder with a variable number of nodes in the bottleneck layer, to determine how many parameters are needed to reconstruct synthetic and observed ground-motion data in terms of their median values and scatter. The reconstruction error as a function of the number of nodes in the bottleneck is used as an indicator of the underlying dimensionality of ground-motion data, that is, the minimum number of predictor variables needed in a ground-motion model. Two synthetic and one observed datasets are studied to prove the performance of the proposed method. We find that mapping ground-motion data to a 2D manifold primarily captures magnitude and distance information and is suited for an approximate data reconstruction. The data reconstruction improves with an increasing number of bottleneck nodes of up to three and four, but it saturates if more nodes are added to the bottleneck.}, language = {en} } @article{KothaBindiCotton2017, author = {Kotha, Sreeram Reddy and Bindi, Dino and Cotton, Fabrice Pierre}, title = {From Ergodic to Region- and Site-Specific Probabilistic Seismic Hazard Assessment: Method Development and Application at European and Middle Eastern Sites}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {33}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/081016EQS130M}, pages = {1433 -- 1453}, year = {2017}, abstract = {The increasing numbers of recordings at individual sites allows quantification of empirical linear site-response adjustment factors (delta S2S(s)) from the ground motion prediction equation (GMPE) residuals. The delta S2S(s) are then used to linearly scale the ergodic GMPE predictions to obtain site-specific ground motion predictions in a partially non-ergodic Probabilistic Seismic Hazard Assessment (PSHA). To address key statistical and conceptual issues in the current practice, we introduce a novel empirical region-and site-specific PSHA methodology wherein, (1) site-to-site variability (phi(S2S)) is first estimated as a random-variance in a mixed-effects GMPE regression, (2) delta S2S(s) at new sites with strong motion are estimated using the a priori phi(S2S), and (3) the GMPE site-specific single-site aleatory variability sigma(ss,s) is replaced with a generic site-corrected aleatory variability sigma(0). Comparison of region- and site-specific hazard curves from our method against the traditional ergodic estimates at 225 sites in Europe and Middle East shows an approximate 50\% difference in predicted ground motions over a range of hazard levels-a strong motivation to increase seismological monitoring of critical facilities and enrich regional ground motion data sets.}, language = {en} } @article{PilzCottonZhu2021, author = {Pilz, Marco and Cotton, Fabrice Pierre and Zhu, Chuanbin}, title = {How much are sites affected by 2-D and 3-D site effects?}, series = {Geophysical journal international}, volume = {228}, journal = {Geophysical journal international}, number = {3}, publisher = {Oxford University Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggab454}, pages = {1992 -- 2004}, year = {2021}, abstract = {1-D site response analysis dominates earthquake engineering practice, while local 2-D/3-D models are often required at sites where the site response is complex. For such sites, the 1-D representation of the soil column can account neither for topographic effects or dipping layers nor for locally generated horizontally propagating surface waves. It then remains a crucial task to identify whether the site response can be modelled sufficiently precisely by 1-D analysis. In this study we develop a method to classify sites according to their 1-D or 2-D/3-D nature. This classification scheme is based on the analysis of surface earthquake recordings and the evaluation of the variability and similarity of the horizontal Fourier spectra. The taxonomy is focused on capturing significant directional dependencies and interevent variabilities indicating a more probable 2-D/3-D structure around the site causing the ground motion to be more variable. While no significant correlation of the 1-D/3-D site index with environmental parameters and site proxies seems to exist, a reduction in the within-site (single-station) variability is found. The reduction is largest (up to 20 per cent) for purely 1-D sites. Although the taxonomy system is developed using surface stations of the KiK-net network in Japan as considerable additional information is available, it can also be applied to any (non-downhole array) site.}, language = {en} } @article{BindiSpallarossaPicozzietal.2018, author = {Bindi, Dino and Spallarossa, D. and Picozzi, M. and Scafidi, D. and Cotton, Fabrice Pierre}, title = {Impact of magnitude selection on aleatory variability associated with ground-motion prediction equations}, series = {Bulletin of the Seismological Society of America}, volume = {108}, journal = {Bulletin of the Seismological Society of America}, number = {3A}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120170356}, pages = {1427 -- 1442}, year = {2018}, abstract = {In this study, we analyzed 10 yrs of seismicity in central Italy from 2008 to 2017, a period witnessing more than 1400 earthquakes in the magnitude range 2.5≤Mw≤6.5⁠. The data set includes the main sequences that have occurred in the area, including those associated with the 2009 Mw 6.3 L'Aquila earthquake and the 2016-2017 sequence (⁠Mw 6.2 Amatrice, Mw 6.1 Visso, and Mw 6.5 Norcia earthquakes). We calibrated a local magnitude scale, investigating the impact of changing the reference distance at which the nonparametric attenuation is tied to the zero-magnitude attenuation function for southern California. We also developed an attenuation model to compute the radiated seismic energy (⁠Es⁠) from the time integral of the squared ground-motion velocity. Seismic moment (⁠M0⁠) and stress drop (⁠Δσ⁠) were estimated for each earthquake by fitting a ω-square model to the source spectra obtained by applying a nonparametric spectral inversion. The Δσ-values vary over three orders of magnitude from about 0.1 to 10 MPa, the larger values associated with the mainshocks. The Δσ-values describe a lognormal distribution with mean and standard deviation equal to log(Δσ)=(-0.25±0.45) (i.e., the mean Δσ is 0.57 MPa, with a 95\% confidence interval from 0.08 to 4.79 MPa). The Δσ variability introduces a spread in the distribution of seismic energy versus moment, with differences in energy up two orders of magnitudes for earthquakes with the same moment. The variability in the high-frequency spectral levels is captured by the local magnitude (⁠ML⁠), which scales with radiated energy as ML=(-1.59+0.52logEs) for logEs≤10.26 and ML=(-1.38+0.50logEs) otherwise. As the peak ground velocity increases with increasing Δσ⁠, local and energy magnitudes perform better than moment magnitude as predictors for the shaking potential. The availability of different magnitude scales and source parameters for a large earthquake population will help characterize the between-event ground-motion variability in central Italy.}, language = {en} } @article{BindiPicozziSpallarossaetal.2019, author = {Bindi, Dino and Picozzi, Matteo and Spallarossa, Daniele and Cotton, Fabrice Pierre and Kotha, Sreeram Reddy}, title = {Impact of Magnitude Selection on Aleatory Variability Associated with Ground-Motion Prediction Equations}, series = {Bulletin of the Seismological Society of America}, volume = {109}, journal = {Bulletin of the Seismological Society of America}, number = {1}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120180239}, pages = {251 -- 262}, year = {2019}, abstract = {We derive a set of regional ground-motion prediction equations (GMPEs) in the Fourier amplitude spectra (FAS-GMPE) and in the spectral acceleration (SA-GMPE) domains for the purpose of interpreting the between-event residuals in terms of source parameter variability. We analyze a dataset of about 65,000 recordings generated by 1400 earthquakes (moment magnitude 2: 5 <= M-w <= 6: 5, hypocentral distance R-hypo <= 150 km) that occurred in central Italy between January 2008 and October 2017. In a companion article (Bindi, Spallarossa, et al., 2018), the nonparametric acceleration source spectra were interpreted in terms of omega-square models modified to account for deviations from a high-frequency flat plateau through a parameter named k(source). Here, the GMPEs are derived considering the moment (M-w), the local (M-L), and the energy (M-e) magnitude scales, and the between-event residuals are computed as random effects. We show that the between-event residuals for the FAS-GMPE implementing M-w are correlated with stress drop, with correlation coefficients increasing with increasing frequency up to about 10 Hz. Contrariwise, the correlation is weak for the FAS-GMPEs implementing M-L and M-e, in particular between 2 and 5 Hz, where most of the corner frequencies lie. At higher frequencies, all models show a strong correlation with k(source). The correlation with the source parameters reflects in a different behavior of the standard deviation tau of the between-event residuals with frequency. Although tau is smaller for the FAS-GMPE using M-w below 1.5 Hz, at higher frequencies, the model implementing either M-L or M-e shows smaller values, with a reduction of about 30\% at 3 Hz (i.e., from 0.3 for M-w to 0.1 for M-L). We conclude that considering magnitude scales informative for the stress-drop variability allows to reduce the between-event variability with a significant impact on the hazard assessment, in particular for studies in which the ergodic assumption on site is removed.}, language = {en} } @article{PinaValdesSocquetCotton2018, author = {Pina-Valdes, Jesus and Socquet, Anne and Cotton, Fabrice Pierre}, title = {Insights on the Japanese Subduction Megathrust Properties From Depth and Lateral Variability of Observed Ground Motions}, series = {Journal of geophysical research : Solid earth}, volume = {123}, journal = {Journal of geophysical research : Solid earth}, number = {10}, publisher = {American Geophysical Union}, address = {Washington}, issn = {2169-9313}, doi = {10.1029/2018JB015743}, pages = {8937 -- 8956}, year = {2018}, abstract = {Two ground motion prediction equation models for subduction zones have been tested using a public ground motion database of the KiK-net records obtained by automated processing protocols (Dawood et al., 2016, https://doi.org/10.1193/071214EQS106). The database contains records of more than 700 interface earthquakes that occurred on the Japan subduction between 1998 and 2012. The Zhao et al. (2006, https://doi.org/10.1785/0120050122) ground motion prediction equation was shown to be the best suited model for the region. It was then used as backbone to analyze the variability of ground motion records. The residuals between observed and predicted ground motions have been analyzed to study the spatial variation of the earthquakes' ground motion frequency content on the Japan megathrust. This analysis revealed a depth dependency of generated ground motions consistent with the downdip segmentation proposed for subduction interfaces (Lay et al., 2012, https://doi.org/10.1029/2011JB009133), a regional ground motion dependency that may be related with lateral variations of the mechanical properties of the subduction interface and a high-frequency radiations drop in the earthquake sequence that preceded the Tohoku-Oki earthquake Mw 9.0. The regional ground motion dependency suggests the existence of different domains along trench of the Japan subduction megathrust that control the ground motions and the wave radiation patterns of interface earthquakes. The location of their boundaries is consistent with the extension of the rupture of the 2011 Tohoku-Oki earthquake, with pre-Tohoku interseismic coupling, and with the free air gravity anomalies.}, language = {en} } @article{JaraSanchezReyesSocquetetal.2018, author = {Jara, Jorge and Sanchez-Reyes, Hugo and Socquet, Anne and Cotton, Fabrice Pierre and Virieux, Jean and Maksymowicz, Andrei and Diaz-Mojica, John and Walpersdorf, Andrea and Ruiz, Javier and Cotte, Nathalie and Norabuena, Edmundo}, title = {Kinematic study of Iquique 2014 M-w 8.1 earthquake}, series = {Earth \& planetary science letters}, volume = {503}, journal = {Earth \& planetary science letters}, publisher = {Elsevier}, address = {Amsterdam}, issn = {0012-821X}, doi = {10.1016/j.epsl.2018.09.025}, pages = {131 -- 143}, year = {2018}, abstract = {We study the rupture processes of Iquique earthquake M-w 8.1 (2014/04/01) and its largest aftershock M-w 7.7 (2014/04/03) that ruptured the North Chile subduction zone. High-rate Global Positioning System (GPS) recordings and strong motion data are used to reconstruct the evolution of the slip amplitude, rise time and rupture time of both earthquakes. A two-step inversion scheme is assumed, by first building prior models for both earthquakes from the inversion of the estimated static displacements and then, kinematic inversions in the frequency domain are carried out taken into account this prior information. The preferred model for the mainshock exhibits a seismic moment of 1.73 x 10(21) Nm (M-w 8.1) and maximum slip of similar to 9 m, while the aftershock model has a seismic moment of 3.88 x 10(20) (M-w 7.7) and a maximum slip of similar to 3 m. For both earthquakes, the final slip distributions show two asperities (a shallow one and a deep one) separated by an area with significant slip deficit. This suggests a segmentation along-dip which might be related to a change of the dipping angle of the subducting slab inferred from gravimetric data. Along-strike, the areas where the seismic ruptures stopped seem to be well correlated with geological features observed from geophysical information (high-resolution bathymetry, gravimetry and coupling maps) that are representative of the long-term segmentation of the subduction margin. Considering the spatially limited portions that were broken by these two earthquakes, our results support the idea that the seismic gap is not filled yet. (C) 2018 Elsevier B.V. All rights reserved.}, language = {en} } @article{LetortRetailleauBoueetal.2018, author = {Letort, Jean and Retailleau, Lise and Boue, Pierre and Radiguet, Mathilde and Gardonio, Blandine and Cotton, Fabrice Pierre and Campillo, Michel}, title = {Lateral variations of the Guerrero-Oaxaca subduction zone (Mexico) derived from weak seismicity (M(b)3.5+) detected on a single array at teleseismic distance}, series = {Geophysical journal international}, volume = {213}, journal = {Geophysical journal international}, number = {2}, publisher = {Oxford Univ. Press}, address = {Oxford}, issn = {0956-540X}, doi = {10.1093/gji/ggy035}, pages = {1002 -- 1012}, year = {2018}, abstract = {Detections of pP and sP phase arrivals (the so-called depth phases) at teleseismic distance provide one of the best ways to estimate earthquake focal depth, as the P-pP and the P-sP delays are strongly dependent on the depth. Based on a new processing workflow and using a single seismic array at teleseismic distance, we can estimate the depth of clusters of small events down to magnitude M-b 3.5. Our method provides a direct view of the relative variations of the seismicity depth from an active area. This study focuses on the application of this new methodology to study the lateral variations of the Guerrero subduction zone (Mexico) using the Eielson seismic array in Alaska (USA). After denoising the signals, 1232 M-b 3.5 + events were detected, with clear P, pP, sP and PcP arrivals. A high-resolution view of the lateral variations of the depth of the seismicity of the Guerero-Oaxaca area is thus obtained. The seismicity is shown to be mainly clustered along the interface, coherently following the geometry of the plate as constrained by the receiver-function analysis along the Meso America Subduction Experiment profile. From this study, the hypothesis of tears on the western part of Guerrero and the eastern part of Oaxaca are strongly confirmed by dramatic lateral changes in the depth of the earthquake clusters. The presence of these two tears might explain the observed lateral variations in seismicity, which is correlated with the boundaries of the slow slip events.}, language = {en} } @article{BoraCottonScherbaum2019, author = {Bora, Sanjay Singh and Cotton, Fabrice Pierre and Scherbaum, Frank}, title = {NGA-West2 Empirical Fourier and Duration Models to Generate Adjustable Response Spectra}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {35}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, number = {1}, publisher = {Sage Publ.}, address = {Thousand Oaks}, issn = {8755-2930}, doi = {10.1193/110317EQS228M}, pages = {61 -- 93}, year = {2019}, abstract = {Adjustment of median ground motion prediction equations (GMPEs) from one region to another region is one of the major challenges within the current practice of seismic hazard analysis. In our approach of generating response spectra, we derive two separate empirical models for a) Fourier amplitude spectrum (FAS) and b) duration of ground motion. To calculate response spectra, the two models are combined within the random vibration theory (RVT) framework. The models are calibrated on recordings obtained from shallow crustal earthquakes in active tectonic regions. We use a subset of NGA-West2 database with M3.2-7.9 earthquakes at distances 0-300 km. The NGA-West2 database expanded over a wide magnitude and distance range facilitates a better constraint over derived models. A frequency-dependent duration model is derived to obtain adjustable response spectral ordinates. Excellent comparison of our approach with other NGA-West2 models implies that it can also be used as a stand-alone model.}, language = {en} } @article{ScherbaumSchmedesCotton2004, author = {Scherbaum, Frank and Schmedes, J. and Cotton, Fabrice Pierre}, title = {On the conversion of source-to-site distance measures for extended earthquake source models}, issn = {0037-1106}, year = {2004}, abstract = {One of the major challenges in engineering seismology is the reliable prediction of site-specific ground motion for particular earthquakes, observed at specific distances. For larger events, a special problem arises, at short distances, with the source-to-site distance measure, because distance metrics based on a point-source model are no longer appropriate. As a consequence, different attenuation relations differ in the distance metric that they use. In addition to being a source of confusion, this causes problems to quantitatively compare or combine different ground- motion models; for example, in the context of Probabilistic Seismic Hazard Assessment, in cases where ground-motion models with different distance metrics occupy neighboring branches of a logic tree. In such a situation, very crude assumptions about source sizes and orientations often have to be used to be able to derive an estimate of the particular metric required. Even if this solves the problem of providing a number to put into the attenuation relation, a serious problem remains. When converting distance measures, the corresponding uncertainties map onto the estimated ground motions according to the laws of error propagation. To make matters worse, conversion of distance metrics can cause the uncertainties of the adapted ground-motion model to become magnitude and distance dependent, even if they are not in the original relation. To be able to treat this problem quantitatively, the variability increase caused by the distance metric conversion has to be quantified. For this purpose, we have used well established scaling laws to determine explicit distance conversion relations using regression analysis on simulated data. We demonstrate that, for all practical purposes, most popular distance metrics can be related to the Joyner-Boore distance using models based on gamma distributions to express the shape of some "residual function." The functional forms are magnitude and distance dependent and are expressed as polynomials. We compare the performance of these relations with manually derived individual distance estimates for the Landers, the Imperial Valley, and the Chi-Chi earthquakes}, language = {en} } @article{BommerDouglasScherbaumetal.2010, author = {Bommer, Julian J. and Douglas, John and Scherbaum, Frank and Cotton, Fabrice Pierre and Bungum, Hilmar and Faeh, Donat}, title = {On the selection of ground-motion prediction equations for seismic hazard analysis}, issn = {0895-0695}, doi = {10.1785/gssrl.81.5.783}, year = {2010}, language = {en} } @article{BeauvalTasanLaurendeauetal.2012, author = {Beauval, Celine and Tasan, Hilal and Laurendeau, Aurore and Delavaud, Elise and Cotton, Fabrice Pierre and Gueguen, Philippe and K{\"u}hn, Nicolas}, title = {On the testing of ground-motion prediction equations against small-magnitude data}, series = {Bulletin of the Seismological Society of America}, volume = {102}, journal = {Bulletin of the Seismological Society of America}, number = {5}, publisher = {Seismological Society of America}, address = {El Cerrito}, issn = {0037-1106}, doi = {10.1785/0120110271}, pages = {1994 -- 2007}, year = {2012}, abstract = {Ground-motion prediction equations (GMPE) are essential in probabilistic seismic hazard studies for estimating the ground motions generated by the seismic sources. In low-seismicity regions, only weak motions are available during the lifetime of accelerometric networks, and the equations selected for the probabilistic studies are usually models established from foreign data. Although most GMPEs have been developed for magnitudes 5 and above, the minimum magnitude often used in probabilistic studies in low-seismicity regions is smaller. Disaggregations have shown that, at return periods of engineering interest, magnitudes less than 5 may be contributing to the hazard. This paper presents the testing of several GMPEs selected in current international and national probabilistic projects against weak motions recorded in France (191 recordings with source-site distances up to 300 km, 3:8 <= M-w <= 4:5). The method is based on the log-likelihood value proposed by Scherbaum et al. (2009). The best-fitting models (approximately 2:5 <= LLH <= 3:5) over the whole frequency range are the Cauzzi and Faccioli (2008), Akkar and Bommer (2010), and Abrahamson and Silva (2008) models. No significant regional variation of ground motions is highlighted, and the magnitude scaling could be the predominant factor in the control of ground-motion amplitudes. Furthermore, we take advantage of a rich Japanese dataset to run tests on randomly selected low-magnitude subsets, and confirm that a dataset of similar to 190 observations, the same size as the French dataset, is large enough to obtain stable LLH estimates. Additionally we perform the tests against larger magnitudes (5-7) from the Japanese dataset. The ranking of models is partially modified, indicating a magnitude scaling effect for some of the models, and showing that extrapolating testing results obtained from low-magnitude ranges to higher magnitude ranges is not straightforward.}, language = {en} } @article{BommerScherbaumBungumetal.2005, author = {Bommer, Julian J. and Scherbaum, Frank and Bungum, Hilmar and Cotton, Fabrice Pierre and Sabetta, F. and Abrahamson, Norman A.}, title = {On the use of logic trees for ground-motion prediction equations in seismic-hazard analysis}, issn = {0037-1106}, year = {2005}, abstract = {Logic trees are widely used in probabilistic seismic hazard analysis as a tool to capture the epistemic uncertainty associated with the seismogenic sources and the ground-motion prediction models used in estimating the hazard. Combining two or more ground-motion relations within a logic tree will generally require several conversions to be made, because there are several definitions available for both the predicted ground-motion parameters and the explanatory parameters within the predictive ground-motion relations. Procedures for making conversions for each of these factors are presented, using a suite of predictive equations in current use for illustration. The sensitivity of the resulting ground-motion models to these conversions is shown to be pronounced for some of the parameters, especially the measure of source-to-site distance, highlighting the need to take into account any incompatibilities among the selected equations. Procedures are also presented for assigning weights to the branches in the ground-motion section of the logic tree in a transparent fashion, considering both intrinsic merits of the individual equations and their degree of applicability to the particular application}, language = {en} } @article{ScherbaumCottonSmit2004, author = {Scherbaum, Frank and Cotton, Fabrice Pierre and Smit, P.}, title = {On the use of response spectral-reference data for the selection and ranking of ground-motion models for seismic-hazard analysis in regions of moderate seismicity : the case of rock motion}, issn = {0037-1106}, year = {2004}, abstract = {The use of ground-motion-prediction equations to estimate ground shaking has become a very popular approach for seismic-hazard assessment, especially in the framework of a logic-tree approach. Owing to the large number of existing published ground-motion models, however, the selection and ranking of appropriate models for a particular target area often pose serious practical problems. Here we show how observed around-motion records can help to guide this process in a systematic and comprehensible way. A key element in this context is a new, likelihood based, goodness-of-fit measure that has the property not only to quantify the model fit but also to measure in some degree how well the underlying statistical model assumptions are met. By design, this measure naturally scales between 0 and 1, with a value of 0.5 for a situation in which the model perfectly matches the sample distribution both in terms of mean and standard deviation. We have used it in combination with other goodness-of-fit measures to derive a simple classification scheme to quantify how well a candidate ground-rnotion-prediction equation models a particular set of observed-response spectra. This scheme is demonstrated to perform well in recognizing a number of popular ground-motion models from their rock-site- recording, subsets. This indicates its potential for aiding the assignment of logic-tree weights in a consistent and reproducible way. We have applied our scheme to the border region of France, Germany, and Switzerland where the M-w 4.8 St. Die earthquake of 22 February 2003 in eastern France recently provided a small set of observed-response spectra. These records are best modeled by the ground-motion-prediction equation of Berge-Thierry et al. (2003), which is based on the analysis of predominantly European data. The fact that the Swiss model of Bay et al. (2003) is not able to model the observed records in an acceptable way may indicate general problems arising from the use of weak-motion data for strong-motion prediction}, language = {en} } @misc{PilzCottonRazafindrakotoetal.2020, author = {Pilz, Marco and Cotton, Fabrice Pierre and Razafindrakoto, Hoby Njara Tendrisoa and Weatherill, Graeme and Spies, Thomas}, title = {Regional broad-band ground-shaking modelling over extended and thick sedimentary basins}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {2}, issn = {1866-8372}, doi = {10.25932/publishup-57165}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571655}, pages = {25}, year = {2020}, abstract = {The simulation of broad-band (0.1 to 10 + Hz) ground-shaking over deep and spatially extended sedimentary basins at regional scales is challenging. We evaluate the ground-shaking of a potential M 6.5 earthquake in the southern Lower Rhine Embayment, one of the most important areas of earthquake recurrence north of the Alps, close to the city of Cologne in Germany. In a first step, information from geological investigations, seismic experiments and boreholes is combined for deriving a harmonized 3D velocity and attenuation model of the sedimentary layers. Three alternative approaches are then applied and compared to evaluate the impact of the sedimentary cover on ground-motion amplification. The first approach builds on existing response spectra ground-motion models whose amplification factors empirically take into account the influence of the sedimentary layers through a standard parameterization. In the second approach, site-specific 1D amplification functions are computed from the 3D basin model. Using a random vibration theory approach, we adjust the empirical response spectra predicted for soft rock conditions by local site amplification factors: amplifications and associated ground-motions are predicted both in the Fourier and in the response spectra domain. In the third approach, hybrid physics-based ground-motion simulations are used to predict time histories for soft rock conditions which are subsequently modified using the 1D site-specific amplification functions computed in method 2. For large distances and at short periods, the differences between the three approaches become less notable due to the significant attenuation of the sedimentary layers. At intermediate and long periods, generic empirical ground-motion models provide lower levels of amplification from sedimentary soils compared to methods taking into account site-specific 1D amplification functions. In the near-source region, hybrid physics-based ground-motions models illustrate the potentially large variability of ground-motion due to finite source effects.}, language = {en} } @article{PilzCottonRazafindrakotoetal.2020, author = {Pilz, Marco and Cotton, Fabrice Pierre and Razafindrakoto, Hoby Njara Tendrisoa and Weatherill, Graeme and Spies, Thomas}, title = {Regional broad-band ground-shaking modelling over extended and thick sedimentary basins}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {19}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, number = {2}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-020-01004-w}, pages = {581 -- 603}, year = {2020}, abstract = {The simulation of broad-band (0.1 to 10 + Hz) ground-shaking over deep and spatially extended sedimentary basins at regional scales is challenging. We evaluate the ground-shaking of a potential M 6.5 earthquake in the southern Lower Rhine Embayment, one of the most important areas of earthquake recurrence north of the Alps, close to the city of Cologne in Germany. In a first step, information from geological investigations, seismic experiments and boreholes is combined for deriving a harmonized 3D velocity and attenuation model of the sedimentary layers. Three alternative approaches are then applied and compared to evaluate the impact of the sedimentary cover on ground-motion amplification. The first approach builds on existing response spectra ground-motion models whose amplification factors empirically take into account the influence of the sedimentary layers through a standard parameterization. In the second approach, site-specific 1D amplification functions are computed from the 3D basin model. Using a random vibration theory approach, we adjust the empirical response spectra predicted for soft rock conditions by local site amplification factors: amplifications and associated ground-motions are predicted both in the Fourier and in the response spectra domain. In the third approach, hybrid physics-based ground-motion simulations are used to predict time histories for soft rock conditions which are subsequently modified using the 1D site-specific amplification functions computed in method 2. For large distances and at short periods, the differences between the three approaches become less notable due to the significant attenuation of the sedimentary layers. At intermediate and long periods, generic empirical ground-motion models provide lower levels of amplification from sedimentary soils compared to methods taking into account site-specific 1D amplification functions. In the near-source region, hybrid physics-based ground-motions models illustrate the potentially large variability of ground-motion due to finite source effects.}, language = {en} } @article{DahmHeimannFunkeetal.2018, author = {Dahm, Torsten and Heimann, Sebastian and Funke, Sigward and Wendt, Siegfried and Rappsilber, Ivo and Bindi, Dino and Plenefisch, Thomas and Cotton, Fabrice Pierre}, title = {Seismicity in the block mountains between Halle and Leipzig, Central Germany}, series = {Journal of seismology}, volume = {22}, journal = {Journal of seismology}, number = {4}, publisher = {Springer}, address = {Dordrecht}, issn = {1383-4649}, doi = {10.1007/s10950-018-9746-9}, pages = {985 -- 1003}, year = {2018}, abstract = {On April 29, 2017 at 0:56 UTC (2:56 local time), an M (W) = 2.8 earthquake struck the metropolitan area between Leipzig and Halle, Germany, near the small town of Markranstadt. The earthquake was felt within 50 km from the epicenter and reached a local intensity of I (0) = IV. Already in 2015 and only 15 km northwest of the epicenter, a M (W) = 3.2 earthquake struck the area with a similar large felt radius and I (0) = IV. More than 1.1 million people live in the region, and the unusual occurrence of the two earthquakes led to public attention, because the tectonic activity is unclear and induced earthquakes have occurred in neighboring regions. Historical earthquakes south of Leipzig had estimated magnitudes up to M (W) ae 5 and coincide with NW-SE striking crustal basement faults. We use different seismological methods to analyze the two recent earthquakes and discuss them in the context of the known tectonic structures and historical seismicity. Novel stochastic full waveform simulation and inversion approaches are adapted for the application to weak, local earthquakes, to analyze mechanisms and ground motions and their relation to observed intensities. We find NW-SE striking normal faulting mechanisms for both earthquakes and centroid depths of 26 and 29 km. The earthquakes are located where faults with large vertical offsets of several hundred meters and Hercynian strike have developed since the Mesozoic. We use a stochastic full waveform simulation to explain the local peak ground velocities and calibrate the method to simulate intensities. Since the area is densely populated and has sensitive infrastructure, we simulate scenarios assuming that a 12-km long fault segment between the two recent earthquakes is ruptured and study the impact of rupture parameters on ground motions and expected damage.}, language = {en} } @article{DerrasBardCotton2016, author = {Derras, Boumediene and Bard, Pierre-Yves and Cotton, Fabrice Pierre}, title = {Site-Condition Proxies, Ground Motion Variability, and Data-Driven GMPEs: Insights from the NGA-West2 and RESORCE Data Sets}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {32}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/060215EQS082M}, pages = {2027 -- 2056}, year = {2016}, abstract = {We compare the ability of various site-condition proxies (SCPs) to reduce the aleatory variability of ground motion prediction equations (GMPEs). Three SCPs (measured V-S30, inferred V-S30, local topographic slope) and two accelerometric databases (RESORCE and NGA-West2) are considered. An artificial neural network (ANN) approach including a random-effect procedure is used to derive GMPEs setting the relationship between peak ground acceleration (PGA), peak ground velocity (PGV), pseudo-spectral acceleration [PSA(T)], and explanatory variables (M-w, R-JB, and V-S30 or Slope). The analysis is performed using both discrete site classes and continuous proxy values. All "non-measured" SCPs exhibit a rather poor performance in reducing aleatory variability, compared to the better performance of measured V-S30. A new, fully data-driven GMPE based on the NGA-West2 is then derived, with an aleatory variability value depending on the quality of the SCP. It proves very consistent with previous GMPEs built on the same data set. Measuring V-S30 allows for benefit from an aleatory variability reduction up to 15\%.}, language = {en} } @article{KothaBindiCotton2017, author = {Kotha, Sreeram Reddy and Bindi, Dino and Cotton, Fabrice Pierre}, title = {Site-Corrected Magnitude- and Region-Dependent Correlations of Horizontal Peak Spectral Amplitudes}, series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, volume = {33}, journal = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute}, publisher = {Earthquake Engineering Research Institute}, address = {Oakland}, issn = {8755-2930}, doi = {10.1193/091416EQS150M}, pages = {1415 -- 1432}, year = {2017}, abstract = {Empirical correlations of horizontal peak spectral amplitudes (PSA) are modeled using the total-residuals obtained in a ground motion prediction equation (GMPE) regression. Recent GMPEs moved toward partially non-ergodic region-and site-specific predictions, while the residual correlation models remained largely ergodic. Using mixed-effects regression, we decompose the total-residuals of a pan-European GMPE into between-event, between-site, and event-and-site corrected residuals to investigate the ergodicity in empirical PSA correlations. We first observed that the between-event correlations are magnitude-dependent, partially due to the differences in source spectra, and influence of stress-drop parameter on small and large events. Next, removing the between-site residuals from within-event residuals yields the event-and-site corrected residuals which are found to be region-dependent, possibly due to the regional differences in distance-decay of short period PSAs. Using our site-corrected magnitude- and region-dependent correlations, and the between-site residuals as empirical site-specific ground motion adjustments, we compute partially non-ergodic conditional mean spectra at four well-recorded sites in Europe and Middle Eastern regions.}, language = {en} } @article{PinaValdesSocquetCottonetal.2018, author = {Pina-Valdes, Jesus and Socquet, Anne and Cotton, Fabrice Pierre and Specht, Sebastian}, title = {Spatiotemporal Variations of Ground Motion in Northern Chile before and after the 2014 M-w 8.1 Iquique Megathrust Event}, series = {Bulletin of the Seismological Society of America}, volume = {108}, journal = {Bulletin of the Seismological Society of America}, number = {2}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120170052}, pages = {801 -- 814}, year = {2018}, abstract = {To evaluate the spatiotemporal variations of ground motions in northern Chile, we built a high-quality rock seismic acceleration database and an interface earthquakes catalog. Two ground-motion prediction equation (GMPE) models for subduction zones have been tested and validated for the area. They were then used as backbone models to describe the time-space variations of earthquake frequency content (Fourier and response spectra). Consistent with previous studies of large subduction earthquakes, moderate interface earthquakes in northern Chile show an increase of the high-frequency energy released with depth. A regional variability of earthquake frequency content is also observed, which may be related to a lateral segmentation of the mechanical properties of the subduction interface. Finally, interface earthquakes show a temporal evolution of their frequency content in the earthquake sequence associated with the 2014 Iquique M-w 8.1 megathrust earthquake. Surprisingly, the change does not occur with the mainshock but is associated with an 8 month slow slip preceding the megathrust. Electronic Supplement: Strong-motion database.}, language = {en} } @article{BoraCottonScherbaumetal.2017, author = {Bora, Sanjay Singh and Cotton, Fabrice Pierre and Scherbaum, Frank and Edwards, Benjamin and Traversa, Paola}, title = {Stochastic source, path and site attenuation parameters and associated variabilities for shallow crustal European earthquakes}, series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, volume = {15}, journal = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering}, publisher = {Springer}, address = {Dordrecht}, issn = {1570-761X}, doi = {10.1007/s10518-017-0167-x}, pages = {4531 -- 4561}, year = {2017}, abstract = {We have analyzed the recently developed pan-European strong motion database, RESORCE-2012: spectral parameters, such as stress drop (stress parameter, Delta sigma), anelastic attenuation (Q), near surface attenuation (kappa(0)) and site amplification have been estimated from observed strong motion recordings. The selected dataset exhibits a bilinear distance-dependent Q model with average kappa(0) value 0.0308 s. Strong regional variations in inelastic attenuation were also observed: frequency-independent Q(0) of 1462 and 601 were estimated for Turkish and Italian data respectively. Due to the strong coupling between Q and kappa(0), the regional variations in Q have strong impact on the estimation of near surface attenuation kappa(0). kappa(0) was estimated as 0.0457 and 0.0261 s for Turkey and Italy respectively. Furthermore, a detailed analysis of the variability in estimated kappa(0) revealed significant within-station variability. The linear site amplification factors were constrained from residual analysis at each station and site-class type. Using the regional Q(0) model and a site-class specific kappa(0), seismic moments (M-0) and source corner frequencies f (c) were estimated from the site corrected empirical Fourier spectra. Delta sigma did not exhibit magnitude dependence. The median Delta sigma value was obtained as 5.75 and 5.65 MPa from inverted and database magnitudes respectively. A comparison of response spectra from the stochastic model (derived herein) with that from (regional) ground motion prediction equations (GMPEs) suggests that the presented seismological parameters can be used to represent the corresponding seismological attributes of the regional GMPEs in a host-to-target adjustment framework. The analysis presented herein can be considered as an update of that undertaken for the previous Euro-Mediterranean strong motion database presented by Edwards and Fah (Geophys J Int 194(2):1190-1202, 2013a).}, language = {en} } @article{ZaccarelliBindiStrolloetal.2019, author = {Zaccarelli, Riccardo and Bindi, Dino and Strollo, Angelo and Quinteros, Javier and Cotton, Fabrice Pierre}, title = {Stream2segment: An Open-Source Tool for Downloading, Processing, and Visualizing Massive Event-Based Seismic Waveform Datasets}, series = {Seismological research letters}, volume = {90}, journal = {Seismological research letters}, number = {5}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0895-0695}, doi = {10.1785/0220180314}, pages = {2028 -- 2038}, year = {2019}, abstract = {The task of downloading comprehensive datasets of event-based seismic waveforms has been made easier through the development of standardized webservices but is still highly nontrivial because the likelihood of temporary network failures or subtle data errors naturally increases when the amount of requested data is in the order of millions of relatively short segments. This is even more challenging because the typical workflow is not restricted to a single massive download but consists of fetching all possible available input data (e.g., with several repeated download executions) for a processing stage producing any desired user-defined output. Here, we present stream2segment, a highly customizable Python 2+3 package helping the user in the entire workflow of downloading, inspecting, and processing event-based seismic data by means of a relational database management system as archiving storage, which has clear performance and usability advantages, and an integrated processing subroutine requiring a configuration file and a single Python function to produce user-defined output. Stream2segment can also produce diagnostic maps or user-defined plots, which, unlike existing tools, do not require external software dependencies and are not static images but instead are interactive browser-based applications ideally suited for data inspection or annotation tasks and subsequent training of classifiers in foreseen supervised machine-learning applications. Stream2segment has already been used as a data quality tool for datasets within the European Integrated Data Archive and to create a weak-motion database (in the form of a so-called flat file) for the stable continental region of Europe in the context of the European Ground Shaking Intensity Model service, in turn an important building block for seismic hazard studies.}, language = {en} } @article{BindiCottonSpallarossaetal.2018, author = {Bindi, Dino and Cotton, Fabrice Pierre and Spallarossa, Daniele and Picozzi, Matteo and Rivalta, Eleonora}, title = {Temporal variability of ground shaking and stress drop in Central Italy}, series = {Bulletin of the Seismological Society of America}, volume = {108}, journal = {Bulletin of the Seismological Society of America}, number = {4}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120180078}, pages = {1853 -- 1863}, year = {2018}, abstract = {Ground-motion prediction equations (GMPEs) are calibrated to predict the intensity of ground shaking at any given location, based on earthquake magnitude, source-to-site distance, local soil amplifications, and other parameters. GMPEs are generally assumed to be independent of time; however, evidence is increasing that large earthquakes modify the shallow soil conditions and those of the fault zone for months or years. These changes may affect the intensity of shaking and result in time-dependent effects that can potentially be resolved by analyzing between-event residuals (residuals between observed and predicted ground motion for individual earthquakes averaged over all stations). Here, we analyze a data set of about 65,000 recordings for about 1400 earthquakes in the moment magnitude range 2.5-6.5 that occurred in central Italy from 2008 to 2017 to capture the temporal variability of the ground shaking at high frequency. We first compute between-event residuals for each earthquake in the Fourier domain with respect to a GMPE developed ad hoc for the analyzed data set. The between-events show large changes after the occurrence of mainshocks such as the 2009 Mw 6.3 L'Aquila, the 2016 Mw 6.2 Amatrice, and Mw 6.5 Norcia earthquakes. Within the time span of a few months after the mainshocks, the between-event contribution to the ground shaking varies by a factor 7. In particular, we find a large drop in the between-events in the aftermath of the L'Aquila earthquake, followed by a slow positive trend that leads to a recovery interrupted by a new drop at the beginning of 2014. We also quantify the frequency-dependent correlation between the Brune stress drop Δσ and the between-events. We find that the temporal changes of Δσ resemble those of the between-event residuals; in particular, during the period when the between-events show the positive trend, the average logarithm of Δσ increases with an annual rate of 0.19 (i.e., the amplification factor for Δσ is 1.56 per year). Breakpoint analysis located a change in the linear trend coefficients of Δσ versus time in February 2014, although no large earthquakes occurred at that time. Finally, the temporal variability of Δσ mirrors the relative seismic-velocity variations observed in previous studies for the same area and period, suggesting that both crack healing along the main fault system and healing of microcracks distributed at shallow depths throughout the surrounding region might be necessary to explain the wider observations of postearthquake recovery.}, language = {en} } @article{ZhuCottonPilz2019, author = {Zhu, Chuanbin and Cotton, Fabrice Pierre and Pilz, Marco}, title = {Testing the Depths to 1.0 and 2.5 km/s Velocity Isosurfaces in a Velocity Model for Japan and Implications for Ground-Motion Modeling}, series = {Bulletin of the Seismological Society of America}, volume = {109}, journal = {Bulletin of the Seismological Society of America}, number = {6}, publisher = {Seismological Society of America}, address = {Albany}, issn = {0037-1106}, doi = {10.1785/0120190016}, pages = {2710 -- 2721}, year = {2019}, abstract = {In the Next Generation Attenuation West2 (NGA-West2) project, a 3D subsurface structure model (Japan Seismic Hazard Information Station [J-SHIS]) was queried to establish depths to 1.0 and 2.5 km/s velocity isosurfaces for sites without depth measurement in Japan. In this article, we evaluate the depth parameters in the J-SHIS velocity model by comparing them with their corresponding site-specific depth measurements derived from selected KiK-net velocity profiles. The comparison indicates that the J-SHIS model underestimates site depths at shallow sites and overestimates depths at deep sites. Similar issues were also identified in the southern California basin model. Our results also show that these underestimations and over-estimations have a potentially significant impact on ground-motion prediction using NGA-West2 ground-motion models (GMMs). Site resonant period may be considered as an alternative to depth parameter in the site term of a GMM.}, language = {en} } @article{BommerAbrahamsonStrasseretal.2004, author = {Bommer, Julian J. and Abrahamson, Norman A. and Strasser, F. O. and Pecker, Alain and Bard, Pierre-Yves and Bungum, Hilmar and Cotton, Fabrice Pierre and F{\"a}h, Donat and Sabetta, F. and Scherbaum, Frank and Studer, Jost}, title = {The challenge of defining upper bounds on earthquake ground motions}, issn = {0895-0695}, year = {2004}, language = {en} } @article{ScherbaumCottonStaedtke2006, author = {Scherbaum, Frank and Cotton, Fabrice Pierre and Staedtke, Helmut}, title = {The estimation of minimum-misfit stochastic models from empirical ground-motion prediction equations}, doi = {10.1785/0120050015}, year = {2006}, abstract = {In areas of moderate to low seismic activity there is commonly a lack of recorded strong ground motion. As a consequence, the prediction of ground motion expected for hypothetical future earthquakes is often performed by employing empirical models from other regions. In this context, Campbell's hybrid empirical approach (Campbell, 2003, 2004) provides a methodological framework to adapt ground-motion prediction equations to arbitrary target regions by using response spectral host-to-target-region-conversion filters. For this purpose, the empirical ground-motion prediction equation has to be quantified in terms of a stochastic model. The problem we address here is how to do this in a systematic way and how to assess the corresponding uncertainties. For the determination of the model parameters we use a genetic algorithm search. The stochastic model spectra were calculated by using a speed-optimized version of SMSIM (Boore, 2000). For most of the empirical ground-motion models, we obtain sets of stochastic models that match the empirical models within the full magnitude and distance ranges of their generating data sets fairly well. The overall quality of fit and the resulting model parameter sets strongly depend on the particular choice of the distance metric used for the stochastic model. We suggest the use of the hypocentral distance metric for the stochastic Simulation of strong ground motion because it provides the lowest-misfit stochastic models for most empirical equations. This is in agreement with the results of two recent studies of hypocenter locations in finite-source models which indicate that hypocenters are often located close to regions of large slip (Mai et al., 2005; Manighetti et al., 2005). Because essentially all empirical ground-motion prediction equations contain data from different geographical regions, the model parameters corresponding to the lowest-misfit stochastic models cannot necessarily be expected to represent single, physically realizable host regions but to model the generating data sets in an average way. In addition, the differences between the lowest-misfit stochastic models and the empirical ground-motion prediction equation are strongly distance, magnitude, and frequency dependent, which, according to the laws of uncertainty propagation, will increase the variance of the corresponding hybrid empirical model predictions (Scherbaum et al., 2005). As a consequence, the selection of empirical ground-motion models for host-to-target-region conversions requires considerable judgment of the ground-motion analyst}, language = {en} }