@phdthesis{Bendadani2015, author = {Bendadani, Carolin}, title = {1-Methylpyren: Biotransformation und Gentoxizit{\"a}t}, school = {Universit{\"a}t Potsdam}, pages = {188}, year = {2015}, language = {en} } @phdthesis{Sander2015, author = {Sander, Andreas Alexander Christoph}, title = {Radiatively driven winds of hot stars}, school = {Universit{\"a}t Potsdam}, pages = {153}, year = {2015}, language = {en} } @phdthesis{Otto2015, author = {Otto, Katharina Alexandra}, title = {Mass wasting and the Coriolis effect on asteroid Vesta}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-87390}, school = {Universit{\"a}t Potsdam}, pages = {XVII, 251}, year = {2015}, abstract = {This work investigates the influence of the Coriolis force on mass motion related to the Rheasilvia impact basin on asteroid (4) Vesta's southern hemisphere. The giant basin is 500km in diameter, with a centre which nearly coincides with the rotation axis of Vesta. The Rheasilvia basin partially overlaps an earlier, similarly large impact basin, Veneneia. Mass motion within and in the vicinity of the Rheasilvia basin includes slumping and landslides, which, primarily due to their small linear extents, have not been noticeably affected by the Coriolis force. However, a series of ridges related to the basin exhibit significant curvature, which may record the effect of the Coriolis force on the mass motion which generated them. In this thesis 32 of these curved ridges, in three geologically distinct regions, were examined. The mass motion velocities from which the ridge curvatures may have resulted during the crater modification stage were investigated. Velocity profiles were derived by fitting inertial circles along the curved ridges and considering both the current and past rotation states of Vesta. An iterative, statistical approach was used, whereby the radii of inertial circles were obtained through repeated fitting to triplets of points across the ridges. The most frequently found radius for each central point was then used for velocity derivation at that point. The results of the velocity analysis are strongly supportive of a Coriolis force origin for the curved ridges. Derived velocities (29.6 ± 24.6 m/s) generally agree well with previously published predictions from numerical simulations of mass motion during the impact process. Topographical features such as local slope gradient and mass deposition regions on the curved ridges also independently agree with regions in which the calculated mass motion accelerates or decelerates. Sections of constant acceleration, deceleration and constant velocity are found, showing that mass motion is being governed by varying conditions of topography, regolith structure and friction. Estimates of material properties such as the effective viscosities (1.9-9.0·10⁶ Pa·s) and coefficients of friction (0.02-0.81) are derived from the velocity profile information in these sections. From measured accelerations of mass motions on the crater wall, it is also shown that the crater walls must have been locally steeper at the time of the mass motion. Together with these novel insights into the state and behaviour of material moving during the modification stage of Rheasilvia's formation, this work represents the first time that the Coriolis Effect on mass motions during crater formation has been shown to result in diagnostic features preserved until today.}, language = {en} } @phdthesis{Jehannin2015, author = {Jehannin, Marie}, title = {About the role of physico-chemical properties and hydrodynamics on the progress of a precipitation reaction}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-88364}, school = {Universit{\"a}t Potsdam}, pages = {xii, 130}, year = {2015}, abstract = {The size and morphology control of precipitated solid particles is a major economic issue for numerous industries. For instance, it is interesting for the nuclear industry, concerning the recovery of radioactive species from used nuclear fuel. The precipitates features, which are a key parameter from the post-precipitate processing, depend on the process local mixing conditions. So far, the relationship between precipitation features and hydrodynamic conditions have not been investigated. In this study, a new experimental configuration consisting of coalescing drops is set to investigate the link between reactive crystallization and hydrodynamics. Two configurations of aqueous drops are examined. The first one corresponds to high contact angle drops (>90°) in oil, as a model system for flowing drops, the second one correspond to sessile drops in air with low contact angle (<25°). In both cases, one reactive is dissolved in each drop, namely oxalic acid and cerium nitrate. When both drops get into contact, they may coalesce; the dissolved species mix and react to produce insoluble cerium oxalate. The precipitates features and effect on hydrodynamics are investigated depending on the solvent. In the case of sessile drops in air, the surface tension difference between the drops generates a gradient which induces a Marangoni flow from the low surface tension drop over the high surface tension drop. By setting the surface tension difference between the two drops and thus the Marangoni flow, the hydrodynamics conditions during the drop coalescence could be modified. Diols/water mixtures are used as solvent, in order to fix the surface tension difference between the liquids of both drops regardless from the reactant concentration. More precisely, the used diols, 1,2-propanediol and 1,3-propanediol, are isomer with identical density and close viscosity. By keeping the water volume fraction constant and playing with the 1,2-propanediol and 1,3-propanediol volume fractions of the solvents, the mixtures surface tensions differ up to 10 mN/m for identical/constant reactant concentration, density and viscosity. 3 precipitation behaviors were identified for the coalescence of water/diols/recatants drops depending on the oxalic excess. The corresponding precipitates patterns are visualized by optical microscopy and the precipitates are characterized by confocal microscopy SEM, XRD and SAXS measurements. In the intermediate oxalic excess regime, formation of periodic patterns can be observed. These patterns consist in alternating cerium oxalate precipitates with distinct morphologies, namely needles and "microflowers". Such periodic fringes can be explained by a feedback mechanism between convection, reaction and the diffusion.}, language = {en} } @phdthesis{Sarem2015, author = {Sarem, Zeinab}, title = {Regulation of IGF-1 bioactivity by dietary hormones, impact of glucagon and insulin-induced hypoglycemia}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82198}, school = {Universit{\"a}t Potsdam}, pages = {IX, 64, IV, XIII}, year = {2015}, abstract = {Der Zusammenhang zwischen Ern{\"a}hrung und der Entwicklung von chronischen Krankenheiten wie metabolischem Syndrom, Diabetes mellitus, Krebs und kardiovaskul{\"a}ren Erkrankungen wurde untersucht. Ver{\"a}nderungen der GH-IGF-1 Achse in Verbindung mit ern{\"a}hrungsbedingten Erkrankungen wurden fr{\"u}her beschrieben. Das Wechselspiel zwischen GH, gesamt IGF-1 und verschiedenen hemmenden und stimulierenden IGF-1 bindenden Proteinen (IGFBPs) bestimmt die IGF-1 Bioaktivit{\"a}t, die als die F{\"a}higkeit von IGF-1 die Phosphorylierung von seinem Rezeptor und folglich seinem Signalsweg zu induzieren, identifiziert ist. Deshalb reicht die Messung der IGF-1 Bioaktivit{\"a}t aus, um {\"A}nderungen des GH-IGF-1 Systems darzustellen. Studien deuten darauf hin, dass proteinreiche Di{\"a}t, gekennzeichnet durch erh{\"o}hte Glukagonsekretion, und Insulin-induzierte Hypoglyk{\"a}mie die Sterblichkeit erh{\"o}hen, und die Mechanismen sind unklar. Sowohl Glukagon als auch Insulin-induzierte Hypoglyk{\"a}mie stimulieren die GH Sekretion. Das Ziel der vorliegenden Studie war, die Wirkung von Glucagon und Insulin-induzierter Hypoglyk{\"a}mie auf die IGF-1 -Bioaktivit{\"a}t als m{\"o}gliche Mechanismen zu characterizieren. In einer doppelblinden, Placebo-kontrollierten Studie wurde Glukagon intramuskul{\"a}r 13 Patienten mit T1DM (6 M{\"a}nner / 7 Frauen; [ BMI ] : 24,8 ± 0,95 kg / m2) , 11 {\"u}bergewichtigen Teilnehmern (OP ; 5/6 ; 34,4 ± 1,7 kg / m2) und 13 gesunden schlanken Teilnehmern (LP ; 6/7 ; 21,7 ± 0,6 kg / m2) administriert. Zw{\"o}lf {\"u}bergewichtige Teilnehmer (OP ; 6/6 ; 34,4 ± 1,7 kg / m2) und 13 gesunde schlanke Teilnehmer (LP ; 6/7 ; 21,7 ± 0,6 kg / m2) f{\"u}hrten Insulintoleranztests in einer weiteren doppelblinden, Plazebo- kontrollierten Studie durch. {\"A}nderungen des GH, gesamt-IGF-1, der IGF-bindenden Proteinen ( IGFBPs ) und der IGF-1-Bioaktivit{\"a}t wurden durch das zellbasierte KIRA-Verfahren gemessen. Außerdem wurde die Wechselwirkung zwischen den metabolischen Hormonen (Glucagon und Insulin) und GH-IGF-1-System auf der Transkriptionsebene mit prim{\"a}ren Maus-Hepatozyten untersucht. In dieser Arbeit verringerte Glukagon die IGF-1-Bioaktivit{\"a}t bei den Menschen unabh{\"a}ngig von k{\"o}rpereigenen Insulinspiegeln, h{\"o}chstwahrscheinlich durch Modulation des IGFBP-1 und -2. Die Glukagon-induzierte Reduktion der IGF-1-Bioaktivit{\"a}t stellt einen neuen Mechanismus der Wirkung von Glucagon auf die GH-Sekretion dar und kann als m{\"o}gliche Erkl{\"a}rung f{\"u}r die negativen Auswirkungen der proteinreichen Di{\"a}t im Zusammenhang auf das erh{\"o}hte kardiovaskul{\"a}re Risiko und die Mortalit{\"a}t vorgeschlagen werden. Zus{\"a}tzlich wurde die Insulin-induzierten Hypoglyk{\"a}mie eine Abnahme der IGF-1-Bioaktivit{\"a}t durch Hochregulierung von IGFBP-2 zugeordnet. Diese Ergebnisse k{\"o}nnen auf m{\"o}gliche und wenig erforschte Mechanismen zur Erl{\"a}uterung der starken Assoziation zwischen Hypoglyk{\"a}mie und erh{\"o}hter kardiovaskul{\"a}rer Mortalit{\"a}t bei diabetischen Patienten beziehen.}, language = {en} } @phdthesis{Mulyukova2015, author = {Mulyukova, Elvira}, title = {Stability of the large low shear velocity provinces}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82228}, school = {Universit{\"a}t Potsdam}, pages = {139}, year = {2015}, abstract = {We study segregation of the subducted oceanic crust (OC) at the core mantle boundary and its ability to accumulate and form large thermochemical piles (such as the seismically observed Large Low Shear Velocity Provinces - LLSVPs). Our high-resolution numerical simulations suggest that the longevity of LLSVPs for up to three billion years, and possibly longer, can be ensured by a balance in the rate of segregation of high-density OC-material to the CMB, and the rate of its entrainment away from the CMB by mantle upwellings. For a range of parameters tested in this study, a large-scale compositional anomaly forms at the CMB, similar in shape and size to the LLSVPs. Neutrally buoyant thermochemical piles formed by mechanical stirring - where thermally induced negative density anomaly is balanced by the presence of a fraction of dense anomalous material - best resemble the geometry of LLSVPs. Such neutrally buoyant piles tend to emerge and survive for at least 3Gyr in simulations with quite different parameters. We conclude that for a plausible range of values of density anomaly of OC material in the lower mantle - it is likely that it segregates to the CMB, gets mechanically mixed with the ambient material, and forms neutrally buoyant large scale compositional anomalies similar in shape to the LLSVPs. We have developed an efficient FEM code with dynamically adaptive time and space resolution, and marker-in-cell methodology. This enabled us to model thermochemical mantle convection at realistically high convective vigor, strong thermally induced viscosity variations, and long term evolution of compositional fields.}, language = {en} } @phdthesis{Conforti2015, author = {Conforti, Giovanni}, title = {Reciprocal classes of continuous time Markov Chains}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-82255}, school = {Universit{\"a}t Potsdam}, pages = {xvi, 183}, year = {2015}, abstract = {In this thesis we study reciprocal classes of Markov chains. Given a continuous time Markov chain on a countable state space, acting as reference dynamics, the associated reciprocal class is the set of all probability measures on path space that can be written as a mixture of its bridges. These processes possess a conditional independence property that generalizes the Markov property, and evolved from an idea of Schr{\"o}dinger, who wanted to obtain a probabilistic interpretation of quantum mechanics. Associated to a reciprocal class is a set of reciprocal characteristics, which are space-time functions that determine the reciprocal class. We compute explicitly these characteristics, and divide them into two main families: arc characteristics and cycle characteristics. As a byproduct, we obtain an explicit criterion to check when two different Markov chains share their bridges. Starting from the characteristics we offer two different descriptions of the reciprocal class, including its non-Markov probabilities. The first one is based on a pathwise approach and the second one on short time asymptotic. With the first approach one produces a family of functional equations whose only solutions are precisely the elements of the reciprocal class. These equations are integration by parts on path space associated with derivative operators which perturb the paths by mean of the addition of random loops. Several geometrical tools are employed to construct such formulas. The problem of obtaining sharp characterizations is also considered, showing some interesting connections with discrete geometry. Examples of such formulas are given in the framework of counting processes and random walks on Abelian groups, where the set of loops has a group structure. In addition to this global description, we propose a second approach by looking at the short time behavior of a reciprocal process. In the same way as the Markov property and short time expansions of transition probabilities characterize Markov chains, we show that a reciprocal class is characterized by imposing the reciprocal property and two families of short time expansions for the bridges. Such local approach is suitable to study reciprocal processes on general countable graphs. As application of our characterization, we considered several interesting graphs, such as lattices, planar graphs, the complete graph, and the hypercube. Finally, we obtain some first results about concentration of measure implied by lower bounds on the reciprocal characteristics.}, language = {en} } @phdthesis{AlSaedy2015, author = {Al-Saedy, Ammar Jaffar Muhesin}, title = {Normally solvable lagrangian boundary value problems}, school = {Universit{\"a}t Potsdam}, pages = {110}, year = {2015}, language = {en} } @phdthesis{Alseekh2015, author = {Alseekh, Saleh}, title = {Identification and mode of inheritance of quantitative trait loci (QTL) for metabolite abundance in tomato}, school = {Universit{\"a}t Potsdam}, pages = {134}, year = {2015}, language = {en} } @phdthesis{Heyneke2015, author = {Heyneke, Elmien}, title = {The role of the calcineurin B-like interacting protein kinase, CIPK14 in regulating plant nutrient metabolism}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2015}, language = {en} } @phdthesis{Kuenstler2015, author = {K{\"u}nstler, Andreas}, title = {Spot evolution on the red giant star XX Triangulum}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-84008}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {Spots on stellar surfaces are thought to be stellar analogues of sunspots. Thus, starspots are direct manifestations of strong magnetic fields. Their decay rate is directly related to the magnetic diffusivity, which itself is a key quantity for the deduction of an activity cycle length. So far, no single starspot decay has been observed, and thus no stellar activity cycle was inferred from its corresponding turbulent diffusivity. We investigate the evolution of starspots on the rapidly-rotating K0 giant XX Triangulum. Continuous high-resolution and phase-resolved spectroscopy was obtained with the robotic 1.2-m STELLA telescope on Tenerife over a timespan of six years. With our line-profile inversion code iMap we reconstruct a total of 36 consecutive Doppler maps. To quantify starspot area decay and growth, we match the observed images with simplified spot models based on a Monte-Carlo approach. It is shown that the surface of XX Tri is covered with large high-latitude and even polar spots and with occasional small equatorial spots. Just over the course of six years, we see a systematically changing spot distribution with various time scales and morphology such as spot fragmentation and spot merging as well as spot decay and formation. For the first time, a starspot decay rate on another star than the Sun is determined. From our spot-decay analysis we determine an average linear decay rate of D = -0.067±0.006 Gm^2/day. From this decay rate, we infer a turbulent diffusivity of η_τ = (6.3±0.5) x 10^14 cm^2/s and consequently predict an activity cycle of 26±6 years. The obtained cycle length matches very well with photometric observations. Our time-series of Doppler maps further enables to investigate the differential rotation of XX Tri. We therefore applied a cross-correlation analysis. We detect a weak solar-like differential rotation with a surface shear of α = 0.016±0.003. This value agrees with similar studies of other RS CVn stars. Furthermore, we found evidence for active longitudes and flip-flops. Whereas the more active longitude is located in phase towards the (unseen) companion star, the weaker active longitude is located at the opposite stellar hemisphere. From their periodic appearance, we infer a flip-flop cycle of ~2 years. Both activity phenomena are common on late-type binary stars. Last but not least we redetermine several astrophysical properties of XX Tri and its binary system, as large datasets of photometric and spectroscopic observations are available since its last determination in 1999. Additionally, we compare the rotational spot-modulation from photometric and spectroscopic studies.}, language = {en} } @phdthesis{Timofeeva2015, author = {Timofeeva, Nadezda}, title = {Effect of ions and amino-acid sequence on collagen structure}, school = {Universit{\"a}t Potsdam}, pages = {121}, year = {2015}, language = {en} } @phdthesis{Siegel2015, author = {Siegel, Daniel}, title = {Binary neutron star mergers and short gamma-ray bursts}, school = {Universit{\"a}t Potsdam}, pages = {255}, year = {2015}, language = {en} } @phdthesis{Karo2015, author = {Karo, Nihad Majeed}, title = {Metamorphic evolution of the Northern Zagros Suture Zone (NZSZ)}, school = {Universit{\"a}t Potsdam}, pages = {127}, year = {2015}, language = {en} } @phdthesis{Abon2015, author = {Abon, Catherine Cristobal}, title = {Radar-based rainfall retrieval for flood forecasting in a meso-scale catchment}, school = {Universit{\"a}t Potsdam}, pages = {93 S.}, year = {2015}, language = {en} } @phdthesis{Shivanand2015, author = {Shivanand, Lathe Rahul}, title = {DUF1068 protein family members are involved in cell wall formation in Arabidopsis thaliana}, school = {Universit{\"a}t Potsdam}, pages = {393}, year = {2015}, language = {en} } @phdthesis{Jin2015, author = {Jin, Chenyu}, title = {Theoretical and experimental study of capillary effect on melting}, pages = {97}, year = {2015}, language = {en} } @phdthesis{Kaufmann2015, author = {Kaufmann, Benjamin}, title = {High performance answer set solving}, pages = {182}, year = {2015}, language = {en} } @phdthesis{Geckin2015, author = {Geckin, Vasfiye}, title = {The interpretation of logical connections by monolingual and bilingual children}, pages = {ix, 181}, year = {2015}, language = {en} } @phdthesis{Soulie2015, author = {Souli{\´e}, Virginie}, title = {Sessile droplets of salt solutions on inert and metallic surfaces}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90329}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {In this thesis we investigate the evaporation behaviour of sessile droplets of aqueous saline solutions on planar inert and metallic surfaces and characterise the corrosion phenomenon for iron surfaces. First we study the evaporation behaviour of sessile salty droplets on inert surfaces for a wide range of salt concentrations, relative humidities, droplet sizes and contact angles. Our study reveals the range of validity of the well-accepted diffusion-controlled evaporation model and highlights the impact of salt concentration (surface tension) gradients driven Marangoni flows on the evaporation behaviour and the subsequent salty deposit patterns. Furthermore we study the spatial-temporal evolution of sessile droplets from saline solutions on metallic surfaces. In contrast to the simple, generally accepted Evans droplet model, we show that the corrosion spreads ahead of the macroscopic contact line with a peripheral film. The three-phase contact line is destabilized by surface tension gradients induced by ionic composition changes during the course of the corrosion process and migration of cations towards the droplet perimeter. Finally we investigate the corrosion behaviour under drying salty sessile droplets on metallic surfaces. The corrosion process, in particular the location of anodic and cathodic activities over the footprint droplet area is correlated to the spatial distribution of the salt inside the drying droplet.}, language = {en} } @phdthesis{Schroeder2015, author = {Schr{\"o}der, Sarah}, title = {Modelling surface evolution coupled with tectonics}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90385}, school = {Universit{\"a}t Potsdam}, pages = {viii, 129}, year = {2015}, abstract = {This study presents the development of 1D and 2D Surface Evolution Codes (SECs) and their coupling to any lithospheric-scale (thermo-)mechanical code with a quadrilateral structured surface mesh. Both SECs involve diffusion as approach for hillslope processes and the stream power law to reflect riverbed incision. The 1D SEC settles sediment that was produced by fluvial incision in the appropriate minimum, while the supply-limited 2D SEC DANSER uses a fast filling algorithm to model sedimantation. It is based on a cellular automaton. A slope-dependent factor in the sediment flux extends the diffusion equation to nonlinear diffusion. The discharge accumulation is achieved with the D8-algorithm and an improved drainage accumulation routine. Lateral incision enhances the incision's modelling. Following empirical laws, it incises channels of several cells width. The coupling method enables different temporal and spatial resolutions of the SEC and the thermo-mechanical code. It transfers vertical as well as horizontal displacements to the surface model. A weighted smoothing of the 3D surface displacements is implemented. The smoothed displacement vectors transmit the deformation by bilinear interpolation to the surface model. These interpolation methods ensure mass conservation in both directions and prevent the two surfaces from drifting apart. The presented applications refer to the evolution of the Pamir orogen. A calibration of DANSER's parameters with geomorphological data and a DEM as initial topography highlights the advantage of lateral incision. Preserving the channel width and reflecting incision peaks in narrow channels, this closes the huge gap between current orogen-scale incision models and observed topographies. River capturing models in a system of fault-bounded block rotations reaffirm the importance of the lateral incision routine for capturing events with channel initiation. The models show a low probability of river capturings with large deflection angles. While the probability of river capturing is directly depending on the uplift rate, the erodibility inside of a dip-slip fault speeds up headward erosion along the fault: The model's capturing speed increases within a fault. Coupling DANSER with the thermo-mechanical code SLIM 3D emphasizes the versatility of the SEC. While DANSER has minor influence on the lithospheric evolution of an indenter model, the brittle surface deformation is strongly affected by its sedimentation, widening a basin in between two forming orogens and also the southern part of the southern orogen to south, east and west.}, language = {en} } @phdthesis{Kniepert2015, author = {Kniepert, Juliane}, title = {Correlation between dynamic parameters and device performance of organic solar cells}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-90087}, school = {Universit{\"a}t Potsdam}, pages = {129}, year = {2015}, abstract = {Organic bulk heterojunction (BHJ) solar cells based on polymer:fullerene blends are a promising alternative for a low-cost solar energy conversion. Despite significant improvements of the power conversion efficiency in recent years, the fundamental working principles of these devices are yet not fully understood. In general, the current output of organic solar cells is determined by the generation of free charge carriers upon light absorption and their transport to the electrodes in competition to the loss of charge carriers due to recombination. The object of this thesis is to provide a comprehensive understanding of the dynamic processes and physical parameters determining the performance. A new approach for analyzing the characteristic current-voltage output was developed comprising the experimental determination of the efficiencies of charge carrier generation, recombination and transport, combined with numerical device simulations. Central issues at the beginning of this work were the influence of an electric field on the free carrier generation process and the contribution of generation, recombination and transport to the current-voltage characteristics. An elegant way to directly measure the field dependence of the free carrier generation is the Time Delayed Collection Field (TDCF) method. In TDCF charge carriers are generated by a short laser pulse and subsequently extracted by a defined rectangular voltage pulse. A new setup was established with an improved time resolution compared to former reports in literature. It was found that charge generation is in general independent of the electric field, in contrast to the current view in literature and opposed to the expectations of the Braun-Onsager model that was commonly used to describe the charge generation process. Even in cases where the charge generation was found to be field-dependend, numerical modelling showed that this field-dependence is in general not capable to account for the voltage dependence of the photocurrent. This highlights the importance of efficient charge extraction in competition to non-geminate recombination, which is the second objective of the thesis. Therefore, two different techniques were combined to characterize the dynamics and efficiency of non-geminate recombination under device-relevant conditions. One new approach is to perform TDCF measurements with increasing delay between generation and extraction of charges. Thus, TDCF was used for the first time to measure charge carrier generation, recombination and transport with the same experimental setup. This excludes experimental errors due to different measurement and preparation conditions and demonstrates the strength of this technique. An analytic model for the description of TDCF transients was developed and revealed the experimental conditions for which reliable results can be obtained. In particular, it turned out that the \$RC\$ time of the setup which is mainly given by the sample geometry has a significant influence on the shape of the transients which has to be considered for correct data analysis. Secondly, a complementary method was applied to characterize charge carrier recombination under steady state bias and illumination, i.e. under realistic operating conditions. This approach relies on the precise determination of the steady state carrier densities established in the active layer. It turned out that current techniques were not sufficient to measure carrier densities with the necessary accuracy. Therefore, a new technique {Bias Assisted Charge Extraction} (BACE) was developed. Here, the charge carriers photogenerated under steady state illumination are extracted by applying a high reverse bias. The accelerated extraction compared to conventional charge extraction minimizes losses through non-geminate recombination and trapping during extraction. By performing numerical device simulations under steady state, conditions were established under which quantitative information on the dynamics can be retrieved from BACE measurements. The applied experimental techniques allowed to sensitively analyse and quantify geminate and non-geminate recombination losses along with charge transport in organic solar cells. A full analysis was exemplarily demonstrated for two prominent polymer-fullerene blends. The model system P3HT:PCBM spincast from chloroform (as prepared) exhibits poor power conversion efficiencies (PCE) on the order of 0.5\%, mainly caused by low fill factors (FF) and currents. It could be shown that the performance of these devices is limited by the hole transport and large bimolecular recombination (BMR) losses, while geminate recombination losses are insignificant. The low polymer crystallinity and poor interconnection between the polymer and fullerene domains leads to a hole mobility of the order of 10^-7 cm^2/Vs which is several orders of magnitude lower than the electron mobility in these devices. The concomitant build up of space charge hinders extraction of both electrons and holes and promotes bimolecular recombination losses. Thermal annealing of P3HT:PCBM blends directly after spin coating improves crystallinity and interconnection of the polymer and the fullerene phase and results in comparatively high electron and hole mobilities in the order of 10^-3 cm^2/Vs and 10^-4 cm^2/Vs, respectively. In addition, a coarsening of the domain sizes leads to a reduction of the BMR by one order of magnitude. High charge carrier mobilities and low recombination losses result in comparatively high FF (>65\%) and short circuit current (J_SC ≈ 10 mA/cm^2). The overall device performance (PCE ≈ 4\%) is only limited by a rather low spectral overlap of absorption and solar emission and a small V_OC, given by the energetics of the P3HT. From this point of view the combination of the low bandgap polymer PTB7 with PCBM is a promising approach. In BHJ solar cells, this polymer leads to a higher V_OC due to optimized energetics with PCBM. However, the J_SC in these (unoptimized) devices is similar to the J_SC in the optimized blend with P3HT and the FF is rather low (≈ 50\%). It turned out that the unoptimized PTB7:PCBM blends suffer from high BMR, a low electron mobility of the order of 10^-5 cm^2/Vs and geminate recombination losses due to field dependent charge carrier generation. The use of the solvent additive DIO optimizes the blend morphology, mainly by suppressing the formation of very large fullerene domains and by forming a more uniform structure of well interconnected donor and acceptor domains of the order of a few nanometers. Our analysis shows that this results in an increase of the electron mobility by about one order of magnitude (3 x 10^-4 cm^2/Vs), while BMR and geminate recombination losses are significantly reduced. In total these effects improve the J_SC (≈ 17 mA/cm^2) and the FF (> 70\%). In 2012 this polymer/fullerene combination resulted in a record PCE for a single junction OSC of 9.2\%. Remarkably, the numerical device simulations revealed that the specific shape of the J-V characteristics depends very sensitively to the variation of not only one, but all dynamic parameters. On the one hand this proves that the experimentally determined parameters, if leading to a good match between simulated and measured J-V curves, are realistic and reliable. On the other hand it also emphasizes the importance to consider all involved dynamic quantities, namely charge carrier generation, geminate and non-geminate recombination as well as electron and hole mobilities. The measurement or investigation of only a subset of these parameters as frequently found in literature will lead to an incomplete picture and possibly to misleading conclusions. Importantly, the comparison of the numerical device simulation employing the measured parameters and the experimental \$J-V\$ characteristics allows to identify loss channels and limitations of OSC. For example, it turned out that inefficient extraction of charge carriers is a criticical limitation factor that is often disobeyed. However, efficient and fast transport of charges becomes more and more important with the development of new low bandgap materials with very high internal quantum efficiencies. Likewise, due to moderate charge carrier mobilities, the active layer thicknesses of current high-performance devices are usually limited to around 100 nm. However, larger layer thicknesses would be more favourable with respect to higher current output and robustness of production. Newly designed donor materials should therefore at best show a high tendency to form crystalline structures, as observed in P3HT, combined with the optimized energetics and quantum efficiency of, for example, PTB7.}, language = {en} } @phdthesis{Zaccarella2015, author = {Zaccarella, Emiliano}, title = {Breaking down complexity}, series = {MPI series human cognitive and brain sciences ; 175}, journal = {MPI series human cognitive and brain sciences ; 175}, publisher = {Max-Planck-Institute}, address = {Leipzig}, isbn = {978-3-941504-60-8}, school = {Universit{\"a}t Potsdam}, pages = {217}, year = {2015}, abstract = {The unbounded expressive capacity of human language cannot boil down to an infinite list of sentences stored in a finite brain. Our linguistic knowledge is rather grounded around a rule-based universal syntactic computation—called Merge—which takes categorized units in input (e.g. this and ship), and generates structures by binding words recursively into more complex hierarchies of any length (e.g. this ship; this ship sinks…). Here we present data from different fMRI datasets probing the cortical implementation of this fundamental process. We first pushed complexity down to a three-word level, to explore how Merge creates minimally hierarchical phrases and sentences. We then moved to the most fundamental two-word level, to directly assess the universal invariant nature of Merge, when no additive mechanisms are involved. Our most general finding is that Merge as the basic syntactic operation is primarily performed by confined area, namely BA 44 in the IFG. Activity reduces to its most ventral-anterior portion at the most fundamental level, following fine-grained sub-anatomical parcellation proposed for the region. The deep frontal operculum/anterior-dorsal insula (FOP/adINS), a phylogenetically older and less specialized region, rather appears to support word-accumulation processing in which the categorical information of the word is first accessed based on its lexical status, and then maintained on hold before further processing takes place. The present data confirm the general notion of BA 44 being activated as a function of complex structural hierarchy, but they go beyond this view by proposing that structural sensitivity in BA 44 is already appreciated at the lowest levels of complexity during which minimal phrase-structures are build up, and syntactic Merge is assessed. Further, they call for a redefinition of BA 44 from multimodal area to a macro-region with internal localizable functional profiles}, language = {en} } @phdthesis{Kormann2015, author = {Kormann, Christoph Martin}, title = {Regional climate change effects on hydroclimatic conditions in the Alpine region}, school = {Universit{\"a}t Potsdam}, pages = {129}, year = {2015}, language = {en} } @phdthesis{Neugebauer2015, author = {Neugebauer, Ina}, title = {Reconstructing climate from the Dead Sea sediment record using high-resolution micro-facies analyses}, series = {Dissertation}, journal = {Dissertation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85266}, school = {Universit{\"a}t Potsdam}, pages = {xiv, 97, XXIII}, year = {2015}, abstract = {The sedimentary record of the Dead Sea is a key archive for reconstructing climate in the eastern Mediterranean region, as it stores the environmental and tectonic history of the Levant for the entire Quaternary. Moreover, the lake is located at the boundary between Mediterranean sub-humid to semi-arid and Saharo-Arabian hyper-arid climates, so that even small shifts in atmospheric circulation are sensitively recorded in the sediments. This DFG-funded doctoral project was carried out within the ICDP Dead Sea Deep Drilling Project (DSDDP) that intended to gain the first long, continuous and high-resolution sediment core from the deep Dead Sea basin. The drilling campaign was performed in winter 2010-11 and more than 700 m of sediments were recovered. The main aim of this thesis was (1) to establish the lithostratigraphic framework for the ~455 m long sediment core from the deep Dead Sea basin and (2) to apply high-resolution micro-facies analyses for reconstructing and better understanding climate variability from the Dead Sea sediments. Addressing the first aim, the sedimentary facies of the ~455 m long deep-basin core 5017-1 were described in great detail and characterised through continuous overview-XRF element scanning and magnetic susceptibility measurements. Three facies groups were classified: (1) the marl facies group, (2) the halite facies group and (3) a group involving different expressions of massive, graded and slumped deposits including coarse clastic detritus. Core 5017-1 encompasses a succession of four main lithological units. Based on first radiocarbon and U-Th ages and correlation of these units to on-shore stratigraphic sections, the record comprises the last ca 220 ka, i.e. the upper part of the Amora Formation (parts of or entire penultimate interglacial and glacial), the last interglacial Samra Fm. (~135-75 ka), the last glacial Lisan Fm. (~75-14 ka) and the Holocene Ze'elim Formation. A major advancement of this record is that, for the first time, also transitional intervals were recovered that are missing in the exposed formations and that can now be studied in great detail. Micro-facies analyses involve a combination of high-resolution microscopic thin section analysis and µXRF element scanning supported by magnetic susceptibility measurements. This approach allows identifying and characterising micro-facies types, detecting event layers and reconstructing past climate variability with up to seasonal resolution, given that the analysed sediments are annually laminated. Within this thesis, micro-facies analyses, supported by further sedimentological and geochemical analyses (grain size, X-ray diffraction, total organic carbon and calcium carbonate contents) and palynology, were applied for two time intervals: (1) The early last glacial period ~117-75 ka was investigated focusing on millennial-scale hydroclimatic variations and lake level changes recorded in the sediments. Thereby, distinguishing six different micro-facies types with distinct geochemical and sedimentological characteristics allowed estimating relative lake level and water balance changes of the lake. Comparison of the results to other records in the Mediterranean region suggests a close link of the hydroclimate in the Levant to North Atlantic and Mediterranean climates during the time of the build-up of Northern hemisphere ice sheets during the early last glacial period. (2) A mostly annually laminated late Holocene section (~3700-1700 cal yr BP) was analysed in unprecedented detail through a multi-proxy, inter-site correlation approach of a shallow-water core (DSEn) and its deep-basin counterpart (5017-1). Within this study, a ca 1500 years comprising time series of erosion and dust deposition events was established and anchored to the absolute time-scale through 14C dating and age modelling. A particular focus of this study was the characterisation of two dry periods, from ~3500 to 3300 and from ~3000 to 2400 cal yr BP, respectively. Thereby, a major outcome was the coincidence of the latter dry period with a period of moist and cold climate in Europe related to a Grand Solar Minimum around 2800 cal yr BP and an increase in flood events despite overall dry conditions in the Dead Sea region during that time. These contrasting climate signatures in Europe and at the Dead Sea were likely linked through complex teleconnections of atmospheric circulation, causing a change in synoptic weather patterns in the eastern Mediterranean. In summary, within this doctorate the lithostratigraphic framework of a unique long sediment core from the deep Dead Sea basin is established, which serves as a base for any further high-resolution investigations on this core. It is demonstrated in two case studies that micro-facies analyses are an invaluable tool to understand the depositional processes in the Dead Sea and to decipher past climate variability in the Levant on millennial to seasonal time-scales. Hence, this work adds important knowledge helping to establish the deep Dead Sea record as a key climate archive of supra-regional significance.}, language = {en} } @phdthesis{Thieme2015, author = {Thieme, Christoph J.}, title = {Sequence and structure determinants of microRNA maturation and the elucidation of RNA transport in plants}, school = {Universit{\"a}t Potsdam}, pages = {137}, year = {2015}, language = {en} } @phdthesis{Weits2015, author = {Weits, Daniel}, title = {Regulation of the molecular response to low oxygen in plants}, school = {Universit{\"a}t Potsdam}, pages = {113}, year = {2015}, language = {en} } @phdthesis{Mucha2015, author = {Mucha, Anne}, title = {Temporal interpretation and cross-linguistic variation}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85935}, school = {Universit{\"a}t Potsdam}, pages = {x, 249}, year = {2015}, abstract = {This thesis investigates temporal and aspectual reference in the typologically unrelated African languages Hausa (Chadic, Afro-Asiatic) and Medumba (Grassfields Bantu). It argues that Hausa is a genuinely tenseless language and compares the interpretation of temporally unmarked sentences in Hausa to that of morphologically tenseless sentences in Medumba, where tense marking is optional and graded. The empirical behavior of the optional temporal morphemes in Medumba motivates an analysis as existential quantifiers over times and thus provides new evidence suggesting that languages vary in whether their (past) tense is pronominal or quantificational (see also Sharvit 2014). The thesis proposes for both Hausa and Medumba that the alleged future tense marker is a modal element that obligatorily combines with a prospective future shifter (which is covert in Medumba). Cross-linguistic variation in whether or not a future marker is compatible with non-future interpretation is proposed to be predictable from the aspectual architecture of the given language.}, language = {en} } @phdthesis{Meyer2015, author = {Meyer, Andreas}, title = {Data perspective in business process management}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-84806}, school = {Universit{\"a}t Potsdam}, pages = {xxi, 362}, year = {2015}, abstract = {Gesch{\"a}ftsprozessmanagement ist ein strukturierter Ansatz zur Modellierung, Analyse, Steuerung und Ausf{\"u}hrung von Gesch{\"a}ftsprozessen, um Gesch{\"a}ftsziele zu erreichen. Es st{\"u}tzt sich dabei auf konzeptionelle Modelle, von denen Prozessmodelle am weitesten verbreitet sind. Prozessmodelle beschreiben wer welche Aufgabe auszuf{\"u}hren hat, um das Gesch{\"a}ftsziel zu erreichen, und welche Informationen daf{\"u}r ben{\"o}tigt werden. Damit beinhalten Prozessmodelle Informationen {\"u}ber den Kontrollfluss, die Zuweisung von Verantwortlichkeiten, den Datenfluss und Informationssysteme. Die Automatisierung von Gesch{\"a}ftsprozessen erh{\"o}ht die Effizienz der Arbeitserledigung und wird durch Process Engines unterst{\"u}tzt. Daf{\"u}r werden jedoch Informationen {\"u}ber den Kontrollfluss, die Zuweisung von Verantwortlichkeiten f{\"u}r Aufgaben und den Datenfluss ben{\"o}tigt. W{\"a}hrend aktuelle Process Engines die ersten beiden Informationen weitgehend automatisiert verarbeiten k{\"o}nnen, m{\"u}ssen Daten manuell implementiert und gewartet werden. Dem entgegen verspricht ein modell-getriebenes Behandeln von Daten eine vereinfachte Implementation in der Process Engine und verringert gleichzeitig die Fehleranf{\"a}lligkeit dank einer graphischen Visualisierung und reduziert den Entwicklungsaufwand durch Codegenerierung. Die vorliegende Dissertation besch{\"a}ftigt sich mit der Modellierung, der Analyse und der Ausf{\"u}hrung von Daten in Gesch{\"a}ftsprozessen. Als formale Basis f{\"u}r die Prozessausf{\"u}hrung wird ein konzeptuelles Framework f{\"u}r die Integration von Prozessen und Daten eingef{\"u}hrt. Dieses Framework wird durch operationelle Semantik erg{\"a}nzt, die mittels einem um Daten erweiterten Petrinetz-Mapping vorgestellt wird. Die modellgetriebene Ausf{\"u}hrung von Daten muss komplexe Datenabh{\"a}ngigkeiten, Prozessdaten und den Datenaustausch ber{\"u}cksichtigen. Letzterer tritt bei der Kommunikation zwischen mehreren Prozessteilnehmern auf. Diese Arbeit nutzt Konzepte aus dem Bereich der Datenbanken und {\"u}berf{\"u}hrt diese ins Gesch{\"a}ftsprozessmanagement, um Datenoperationen zu unterscheiden, um Abh{\"a}ngigkeiten zwischen Datenobjekten des gleichen und verschiedenen Typs zu spezifizieren, um modellierte Datenknoten sowie empfangene Nachrichten zur richtigen laufenden Prozessinstanz zu korrelieren und um Nachrichten f{\"u}r die Prozess{\"u}bergreifende Kommunikation zu generieren. Der entsprechende Ansatz ist nicht auf eine bestimmte Prozessbeschreibungssprache begrenzt und wurde prototypisch implementiert. Die Automatisierung der Datenbehandlung in Gesch{\"a}ftsprozessen erfordert entsprechend annotierte und korrekte Prozessmodelle. Als Unterst{\"u}tzung zur Datenannotierung f{\"u}hrt diese Arbeit einen Algorithmus ein, welcher Informationen {\"u}ber Datenknoten, deren Zust{\"a}nde und Datenabh{\"a}ngigkeiten aus Kontrollflussinformationen extrahiert und die Prozessmodelle entsprechend annotiert. Allerdings k{\"o}nnen gew{\"o}hnlich nicht alle erforderlichen Informationen aus Kontrollflussinformationen extrahiert werden, da detaillierte Angaben {\"u}ber m{\"o}gliche Datenmanipulationen fehlen. Deshalb sind weitere Prozessmodellverfeinerungen notwendig. Basierend auf einer Menge von Objektlebenszyklen kann ein Prozessmodell derart verfeinert werden, dass die in den Objektlebenszyklen spezifizierten Datenmanipulationen automatisiert in ein Prozessmodell {\"u}berf{\"u}hrt werden k{\"o}nnen. Prozessmodelle stellen eine Abstraktion dar. Somit fokussieren sie auf verschiedene Teilbereiche und stellen diese im Detail dar. Solche Detailbereiche sind beispielsweise die Kontrollflusssicht und die Datenflusssicht, welche oft durch Aktivit{\"a}ts-zentrierte beziehungsweise Objekt-zentrierte Prozessmodelle abgebildet werden. In der vorliegenden Arbeit werden Algorithmen zur Transformation zwischen diesen Sichten beschrieben. Zur Sicherstellung der Modellkorrektheit wird das Konzept der „weak conformance" zur {\"U}berpr{\"u}fung der Konsistenz zwischen Objektlebenszyklen und dem Prozessmodell eingef{\"u}hrt. Dabei darf das Prozessmodell nur Datenmanipulationen enthalten, die auch in einem Objektlebenszyklus spezifiziert sind. Die Korrektheit wird mittels Soundness-{\"U}berpr{\"u}fung einer hybriden Darstellung ermittelt, so dass Kontrollfluss- und Datenkorrektheit integriert {\"u}berpr{\"u}ft werden. Um eine korrekte Ausf{\"u}hrung des Prozessmodells zu gew{\"a}hrleisten, m{\"u}ssen gefundene Inkonsistenzen korrigiert werden. Daf{\"u}r werden f{\"u}r jede Inkonsistenz alternative Vorschl{\"a}ge zur Modelladaption identifiziert und vorgeschlagen. Zusammengefasst, unter Einsatz der Ergebnisse dieser Dissertation k{\"o}nnen Gesch{\"a}ftsprozesse modellgetrieben ausgef{\"u}hrt werden unter Ber{\"u}cksichtigung sowohl von Daten als auch den zuvor bereits unterst{\"u}tzten Perspektiven bez{\"u}glich Kontrollfluss und Verantwortlichkeiten. Dabei wird die Modellerstellung teilweise mit automatisierten Algorithmen unterst{\"u}tzt und die Modellkonsistenz durch Datenkorrektheits{\"u}berpr{\"u}fungen gew{\"a}hrleistet.}, language = {en} } @phdthesis{Lohren2015, author = {Lohren, Hanna}, title = {Mechanisms of mercury species-mediated neurotoxicity}, school = {Universit{\"a}t Potsdam}, pages = {141, viii}, year = {2015}, language = {en} } @phdthesis{Chen2015, author = {Chen, Zupeng}, title = {Novel strategies to improve (photo)catalytic performance of carbon nitride-based composites}, pages = {ii, 137}, year = {2015}, language = {en} } @phdthesis{Hunke2015, author = {Hunke, Philip Paul}, title = {The Brazilian Cerrado: ecohydrological assessment of water and soil degradation in heavily modified meso-scale catchments}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85110}, school = {Universit{\"a}t Potsdam}, pages = {xi, 124}, year = {2015}, abstract = {The Brazilian Cerrado is recognised as one of the most threatened biomes in the world, as the region has experienced a striking change from natural vegetation to intense cash crop production. The impacts of rapid agricultural expansion on soil and water resources are still poorly understood in the region. Therefore, the overall aim of the thesis is to improve our understanding of the ecohydrological processes causing water and soil degradation in the Brazilian Cerrado. I first present a metaanalysis to provide quantitative evidence and identifying the main impacts of soil and water alterations resulting from land use change. Second, field studies were conducted to (i) examine the effects of land use change on soils of natural cerrado transformed to common croplands and pasture and (ii) indicate how agricultural production affects water quality across a meso-scale catchment. Third, the ecohydrological process-based model SWAT was tested with simple scenario analyses to gain insight into the impacts of land use and climate change on the water cycling in the upper S{\~a}o Louren{\c{c}}o catchment which experienced decreasing discharges in the last 40 years. Soil and water quality parameters from different land uses were extracted from 89 soil and 18 water studies in different regions across the Cerrado. Significant effects on pH, bulk density and available P and K for croplands and less-pronounced effects on pastures were evident. Soil total N did not differ between land uses because most of the cropland sites were N-fixing soybean cultivations, which are not artificially fertilized with N. By contrast, water quality studies showed N enrichment in agricultural catchments, indicating fertilizer impacts and potential susceptibility to eutrophication. Regardless of the land use, P is widely absent because of the high-fixing capacities of deeply weathered soils and the filtering capacity of riparian vegetation. Pesticides, however, were consistently detected throughout the entire aquatic system. In several case studies, extremely high-peak concentrations exceeded Brazilian and EU water quality limits, which pose serious health risks. My field study revealed that land conversion caused a significant reduction in infiltration rates near the soil surface of pasture (-96 \%) and croplands (-90 \% to -93 \%). Soil aggregate stability was significantly reduced in croplands than in cerrado and pasture. Soybean crops had extremely high extractable P (80 mg kg-1), whereas pasture N levels declined. A snapshot water sampling showed strong seasonality in water quality parameters. Higher temperature, oxi-reduction potential (ORP), NO2-, and very low oxygen concentrations (<5 mg•l-1) and saturation (<60 \%) were recorded during the rainy season. By contrast, remarkably high PO43- concentrations (up to 0.8 mg•l-1) were measured during the dry season. Water quality parameters were affected by agricultural activities at all sampled sub-catchments across the catchment, regardless of stream characteristic. Direct NO3- leaching appeared to play a minor role; however, water quality is affected by topsoil fertiliser inputs with impact on small low order streams and larger rivers. Land conversion leaving cropland soils more susceptible to surface erosion by increased overland flow events. In a third study, the field data were used to parameterise SWAT. The model was tested with different input data and calibrated in SWAT-CUP using the SUFI-2 algorithm. The model was judged reliable to simulate the water balance in the Cerrado. A complete cerrado, pasture and cropland cover was used to analyse the impact of land use on water cycling as well as climate change projections (2039-2058) according to the projections of the RCP 8.5 scenario. The actual evapotranspiration (ET) for the cropland scenario was higher compared to the cerrado cover (+100 mm a-1). Land use change scenarios confirmed that deforestation caused higher annual ET rates explaining partly the trend of decreased streamflow. Taking all climate change scenarios into account, the most likely effect is a prolongation of the dry season (by about one month), with higher peak flows in the rainy season. Consequently, potential threats for crop production with lower soil moisture and increased erosion and sediment transport during the rainy season are likely and should be considered in adaption plans. From the three studies of the thesis I conclude that land use intensification is likely to seriously limit the Cerrado's future regarding both agricultural productivity and ecosystem stability. Because only limited data are available for the vast biome, we recommend further field studies to understand the interaction between terrestrial and aquatic systems. This thesis may serve as a valuable database for integrated modelling to investigate the impact of land use and climate change on soil and water resources and to test and develop mitigation measures for the Cerrado in the future.}, language = {en} } @phdthesis{Allroggen2015, author = {Allroggen, Niklas}, title = {Observation of subsurface flow from the surface : applications of ground-penetrating radar}, school = {Universit{\"a}t Potsdam}, pages = {67}, year = {2015}, language = {en} } @phdthesis{Kieling2015, author = {Kieling, Katrin}, title = {Quantification of ground motions by broadband simulations}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-85989}, school = {Universit{\"a}t Potsdam}, pages = {XIV, 118}, year = {2015}, abstract = {In many procedures of seismic risk mitigation, ground motion simulations are needed to test systems or improve their effectiveness. For example they may be used to estimate the level of ground shaking caused by future earthquakes. Good physical models for ground motion simulation are also thought to be important for hazard assessment, as they could close gaps in the existing datasets. Since the observed ground motion in nature shows a certain variability, part of which cannot be explained by macroscopic parameters such as magnitude or position of an earthquake, it would be desirable that a good physical model is not only able to produce one single seismogram, but also to reveal this natural variability. In this thesis, I develop a method to model realistic ground motions in a way that is computationally simple to handle, permitting multiple scenario simulations. I focus on two aspects of ground motion modelling. First, I use deterministic wave propagation for the whole frequency range - from static deformation to approximately 10 Hz - but account for source variability by implementing self-similar slip distributions and rough fault interfaces. Second, I scale the source spectrum so that the modelled waveforms represent the correct radiated seismic energy. With this scaling I verify whether the energy magnitude is suitable as an explanatory variable, which characterises the amount of energy radiated at high frequencies - the advantage of the energy magnitude being that it can be deduced from observations, even in real-time. Applications of the developed method for the 2008 Wenchuan (China) earthquake, the 2003 Tokachi-Oki (Japan) earthquake and the 1994 Northridge (California, USA) earthquake show that the fine source discretisations combined with the small scale source variability ensure that high frequencies are satisfactorily introduced, justifying the deterministic wave propagation approach even at high frequencies. I demonstrate that the energy magnitude can be used to calibrate the high-frequency content in ground motion simulations. Because deterministic wave propagation is applied to the whole frequency range, the simulation method permits the quantification of the variability in ground motion due to parametric uncertainties in the source description. A large number of scenario simulations for an M=6 earthquake show that the roughness of the source as well as the distribution of fault dislocations have a minor effect on the simulated variability by diminishing directivity effects, while hypocenter location and rupture velocity more strongly influence the variability. The uncertainty in energy magnitude, however, leads to the largest differences of ground motion amplitude between different events, resulting in a variability which is larger than the one observed. For the presented approach, this dissertation shows (i) the verification of the computational correctness of the code, (ii) the ability to reproduce observed ground motions and (iii) the validation of the simulated ground motion variability. Those three steps are essential to evaluate the suitability of the method for means of seismic risk mitigation.}, language = {en} } @phdthesis{Schwarz2015, author = {Schwarz, Dana}, title = {Nanoporous melamine resin materials}, school = {Universit{\"a}t Potsdam}, pages = {146}, year = {2015}, language = {en} } @phdthesis{Schiess2015, author = {Schiess, Sonja}, title = {Effects of glucotropaeolin and its breakdown product benzyl isothiocyanate on metabolic, endocrine, and inflammatory parameters in humans}, school = {Universit{\"a}t Potsdam}, pages = {115}, year = {2015}, language = {en} } @phdthesis{Jantz2015, author = {Jantz, Bastian}, title = {The dynamics of accountability in public sector reforms}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-78131}, school = {Universit{\"a}t Potsdam}, pages = {182}, year = {2015}, abstract = {This PhD thesis is essentially a collection of six sequential articles on dynamics of accountability in the reformed employment and welfare administration in different countries. The first article examines how recent changes in the governance of employment services in three European countries (Denmark, Germany and Norway) have influenced accountability relationships from a very wide-ranging perspective. It starts from the overall assumption in the literature that accountability relationships are becoming more numerous and complex, and that these changes may lead to multiple accountability disorder. The article explores these assumptions by analyzing the different actors involved and the information requested in the new governance arrangements in all three countries. It concludes that the considerable changes in organizational arrangements and more managerial information demanded and provided have led to more shared forms of accountability. Nevertheless, a clear development towards less political or administrative accountability could not be observed. The second article analyzes how the structure and development of reform processes affect accountability relationships and via what mechanisms. It is distinguished between an instrumental perspective and an institutional perspective and each of these perspectives takes a different view on the link between reforms and concrete action and results. By taking the welfare reforms in Norway and Germany as an example, it is shown that the reform outcomes in both countries are the result of a complex process of powering, puzzling and institutional constraints where different situational interpretations of problems, interests and administrative legacies had to be balanced. Accountability thus results not from a single process of environmental necessity or strategic choice, but from a dynamic interplay between different actors and institutional spheres. The third article then covers a specific instrument of public sector reforms, i.e. the increasing use of performance management. The article discusses the challenges and ambiguities between performance management and different forms of accountability based on the cases of the reformed welfare administration in Norway and Germany. The findings are that the introduction of performance management creates new accountability structures which influence service delivery, but not necessarily in the direction expected by reform agents. Observed unintended consequences include target fixation, the displacement of political accountability and the predominance of control aspects of accountability. The fourth article analyzes the accountability implications of the increasingly marketized models of welfare governance. It has often been argued that relocating powers and discretion to private contractors involve a trade-off between democratic accountability and efficiency. However, there is limited empirical evidence of how contracting out shapes accountability or is shaped by alternative democratic or administrative forms of accountability. Along these lines the article examines employment service accountability in the era of contracting out in Germany, Denmark and Great Britain. It is found that market accountability instruments are complementary instruments, not substitutes. The findings highlight the importance of administrative and political instruments in legitimizing marketized service provision and shed light on the processes that lead to the development of a hybrid accountability model. The fifth and sixth articles focus on the diagonal accountability relationships between public agencies, supreme audit institutions (SAI) and parental ministry or parliament. The fifth article examines the evolving role of SAIs in Denmark, Germany and Norway focusing particularly on their contribution to public accountability and their ambivalent relationship with some aspects of public sector reform in the welfare sector. The article analyzes how SAIs assess New Public Management inspired reforms in the welfare sector in the three countries. The analysis shows that all three SAIs have taken on an evaluative role when judging New Public Management instruments. At the same time their emphasis on legality and compliance can be at odds with some of the operating principles introduced by New Public Management reforms. The sixth article focuses on the auditing activities of the German SAI in the field of labor market administration as a single in-depth case study. The purpose is to analyze how SAIs gain impact in diagonal accountability settings. The results show that the direct relationship between auditor and auditee based on cooperation and trust is of outstanding importance for SAIs to give effect to their recommendations. However, if an SAI has to rely on actors of diagonal accountability, it is in a vulnerable position as it might lose control over the interpretation of its results.}, language = {en} } @phdthesis{Pinchasik2015, author = {Pinchasik, Bat-El Shani}, title = {Manipulaton of Microbubbles Inspired by Bubble Use in Nature}, school = {Universit{\"a}t Potsdam}, pages = {123}, year = {2015}, language = {en} } @phdthesis{Grubic2015, author = {Grubic, Mira}, title = {Focus and alternative sensitivity in Ngamo (West-Chadic)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-81666}, school = {Universit{\"a}t Potsdam}, year = {2015}, abstract = {The main research question of this thesis concerns the relation between focus interpretation, focus realization, and association with focus in the West Chadic language Ngamo. Concerning the relation between focus realization and interpretation, this thesis contributes to the question, cross-linguistically, what factors influence a marked realization of the focus/background distinction. There is background-marking rather than focus-marking in Ngamo, and the background marker is related to the definite determiner in the language. Using original fieldwork data as a basis, a formal semantic analysis of the background marker as a definite determiner of situations is proposed. Concerning the relation between focus and association with focus, the thesis adds to the growing body of crosslinguistic evidence that not all so-called focus-sensitive operators always associate with focus. The thesis shows that while the exclusive particle yak('i) (= "only") in Ngamo conventionally associates with focus, the particles har('i) (= "even, as far as, until, already"), and ke('e) (= "also, and") do not. The thesis provides an analysis of these phenomena in a situation semantic framework.}, language = {en} } @phdthesis{EidSabbagh2015, author = {Eid-Sabbagh, Rami-Habib}, title = {Business process architectures}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-79719}, school = {Universit{\"a}t Potsdam}, pages = {xvii, 256}, year = {2015}, abstract = {Business Process Management has become an integral part of modern organizations in the private and public sector for improving their operations. In the course of Business Process Management efforts, companies and organizations assemble large process model repositories with many hundreds and thousands of business process models bearing a large amount of information. With the advent of large business process model collections, new challenges arise as structuring and managing a large amount of process models, their maintenance, and their quality assurance. This is covered by business process architectures that have been introduced for organizing and structuring business process model collections. A variety of business process architecture approaches have been proposed that align business processes along aspects of interest, e. g., goals, functions, or objects. They provide a high level categorization of single processes ignoring their interdependencies, thus hiding valuable information. The production of goods or the delivery of services are often realized by a complex system of interdependent business processes. Hence, taking a holistic view at business processes interdependencies becomes a major necessity to organize, analyze, and assess the impact of their re-/design. Visualizing business processes interdependencies reveals hidden and implicit information from a process model collection. In this thesis, we present a novel Business Process Architecture approach for representing and analyzing business process interdependencies on an abstract level. We propose a formal definition of our Business Process Architecture approach, design correctness criteria, and develop analysis techniques for assessing their quality. We describe a methodology for applying our Business Process Architecture approach top-down and bottom-up. This includes techniques for Business Process Architecture extraction from, and decomposition to process models while considering consistency issues between business process architecture and process model level. Using our extraction algorithm, we present a novel technique to identify and visualize data interdependencies in Business Process Data Architectures. Our Business Process Architecture approach provides business process experts,managers, and other users of a process model collection with an overview that allows reasoning about a large set of process models, understanding, and analyzing their interdependencies in a facilitated way. In this regard we evaluated our Business Process Architecture approach in an experiment and provide implementations of selected techniques.}, language = {en} } @phdthesis{Krishnamoorthy2015, author = {Krishnamoorthy, Praveen}, title = {Regulatory roles of Ptdlns(4,5)P2 in trafficking of the cellulose synthase complex and identification of distinct plasma membrane localisation patterns of Arabidopsis PiP5-kinases}, school = {Universit{\"a}t Potsdam}, pages = {133}, year = {2015}, language = {en} } @phdthesis{BaerHenney2015, author = {Baer-Henney, Dinah}, title = {Learners' Little Helper}, school = {Universit{\"a}t Potsdam}, pages = {135}, year = {2015}, language = {en} } @phdthesis{ElKassar2015, author = {El Kassar, Nadja}, title = {Towards a theory of epistemically significant perception}, publisher = {De Gruyter}, address = {Berlin}, isbn = {978-3-11-044563-3}, school = {Universit{\"a}t Potsdam}, pages = {360}, year = {2015}, abstract = {How does perceptual experience make us knowledgeable? This book argues that the answer lies in the nature of perceptual experience: this experience involves conceptual capacities and is a relation between perceiver and world. The author develops her position via a critical examination of conceptualist and relationist theories of perception. A discussion of recent work in vision science rounds up this contribution to the philosophy of perception.}, language = {en} } @phdthesis{Pfestorf2015, author = {Pfestorf, Hans}, title = {Land use intensity and insect root herbivores}, school = {Universit{\"a}t Potsdam}, pages = {161}, year = {2015}, language = {en} } @phdthesis{Tassler2015, author = {Taßler, Stephanie}, title = {Physical-Chemical Investigation of newly-synthesised Lysine-Based Amino-Functionalised Lipids for gene transfection in 2D and 3D model systems}, school = {Universit{\"a}t Potsdam}, pages = {142}, year = {2015}, language = {en} } @phdthesis{Grune2015, author = {Grune, Jana}, title = {Effects of a novel non-steroidal mineralocorticoid receptor antagonist on cardiac hypertrophy}, school = {Universit{\"a}t Potsdam}, pages = {98}, year = {2015}, language = {en} } @phdthesis{Heyer2015, author = {Heyer, Vera}, title = {Native and non-native processing of derived forms}, school = {Universit{\"a}t Potsdam}, pages = {318}, year = {2015}, language = {en} } @phdthesis{Olszewska2015, author = {Olszewska, Agata}, title = {Forming magnetic chain with the help of biological organisms}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-89767}, school = {Universit{\"a}t Potsdam}, pages = {101}, year = {2015}, abstract = {Magnetite nanoparticles and their assembly comprise a new area of development for new technologies. The magnetic particles can interact and assemble in chains or networks. Magnetotactic bacteria are one of the most interesting microorganisms, in which the assembly of nanoparticles occurs. These microorganisms are a heterogeneous group of gram negative prokaryotes, which all show the production of special magnetic organelles called magnetosomes, consisting of a magnetic nanoparticle, either magnetite (Fe3O4) or greigite (Fe3S4), embedded in a membrane. The chain is assembled along an actin-like scaffold made of MamK protein, which makes the magnetosomes to arrange in mechanically stable chains. The chains work as a compass needle in order to allow cells to orient and swim along the magnetic field of the Earth. The formation of magnetosomes is known to be controlled at the molecular level. The physico-chemical conditions of the surrounding environment also influence biomineralization. The work presented in this manuscript aims to understand how such external conditions, in particular the extracellular oxidation reduction potential (ORP) influence magnetite formation in the strain Magnetospirillum magneticum AMB-1. A controlled cultivation of the microorganism was developed in a bioreactor and the formation of magnetosomes was characterized. Different techniques have been applied in order to characterize the amount of iron taken up by the bacteria and in consequence the size of magnetosomes produced at different ORP conditions. By comparison of iron uptake, morphology of bacteria, size and amount of magnetosomes per cell at different ORP, the formation of magnetosomes was inhibited at ORP 0 mV, whereas reduced conditions, ORP - 500 mV facilitate biomineralization process. Self-assembly of magnetosomes occurring in magnetotactic bacteria became an inspiration to learn from nature and to construct nanoparticles assemblies by using the bacteriophage M13 as a template. The M13 bacteriophage is an 800 nm long filament with encapsulated single-stranded DNA that has been recently used as a scaffold for nanoparticle assembly. I constructed two types of assemblies based on bacteriophages and magnetic nanoparticles. A chain - like assembly was first formed where magnetite nanoparticles are attached along the phage filament. A sperm - like construct was also built with a magnetic head and a tail formed by phage filament. The controlled assembly of magnetite nanoparticles on the phage template was possible due to two different mechanism of nanoparticle assembly. The first one was based on the electrostatic interactions between positively charged polyethylenimine coated magnetite nanoparticles and negatively charged phages. The second phage -nanoparticle assembly was achieved by bioengineered recognition sites. A mCherry protein is displayed on the phage and is was used as a linker to a red binding nanobody (RBP) that is fused to the one of the proteins surrounding the magnetite crystal of a magnetosome. Both assemblies were actuated in water by an external magnetic field showing their swimming behavior and potentially enabling further usage of such structures for medical applications. The speed of the phage - nanoparticles assemblies are relatively slow when compared to those of microswimmers previously published. However, only the largest phage-magnetite assemblies could be imaged and it is therefore still unclear how fast these structures can be in their smaller version.}, language = {en} } @phdthesis{Ayguel2015, author = {Ayg{\"u}l, Mesut}, title = {Pre-collisional accretion and exhumation along the southern Laurasian active margin, Central Pontides, Turkey}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-416769}, school = {Universit{\"a}t Potsdam}, pages = {xxxiv, 206}, year = {2015}, abstract = {The Central Pontides is an accretionary-type orogenic area within the Alpine-Himalayan orogenic belt characterized by pre-collisional tectonic continental growth. The region comprises Mesozoic subduction-accretionary complexes and an accreted intra-oceanic arc that are sandwiched between the Laurasian active continental margin and Gondwana-derived the K{\i}r{\c{s}}ehir Block. The subduction-accretion complexes mainly consist of an Albian-Turonian accretionary wedge representing the Laurasian active continental margin. To the north, the wedge consists of slate/phyllite and metasandstone intercalation with recrystallized limestone, Na-amphibole-bearing metabasite (PT= 7-12 kbar and 400 ± 70 ºC) and tectonic slices of serpentinite representing accreted distal part of a large Lower Cretaceous submarine turbidite fan deposited on the Laurasian active continental margin that was subsequently accreted and metamorphosed. Raman spectra of carbonaceous material (RSCM) of the metapelitic rocks revealed that the metaflysch sequence consists of metamorphic packets with distinct peak metamorphic temperatures. The majority of the metapelites are low-temperature (ca. 330 °C) slates characterized by lack of differentiation of the graphite (G) and D2 defect bands. They possibly represent offscraped distal turbidites along the toe of the Albian accretionary wedge. The rest are phyllites that are characterized by slightly pronounced G band with D2 defect band occurring on its shoulder. Peak metamorphic temperatures of these phyllites are constrained to 370-385 °C. The phyllites are associated with a strip of incipient blueschist facies metabasites which are found as slivers within the offscraped distal turbidites. They possibly represent underplated continental metasediments together with oceanic crustal basalt along the basal d{\´e}collement. Tectonic emplacement of the underplated rocks into the offscraped distal turbidites was possibly achieved by out-of-sequence thrusting causing tectonic thickening and uplift of the wedge. 40Ar/39Ar phengite ages from the phyllites are ca. 100 Ma, indicating Albian subduction and regional HP metamorphism. The accreted continental metasediments are underlain by HP/LT metamorphic rocks of oceanic origin along an extensional shear zone. The oceanic metamorphic sequence mainly comprises tectonically thickened deep-seated eclogite to blueschist facies metabasites and micaschists. In the studied area, metabasites are epidote-blueschists locally with garnet (PT= 17 ± 1 kbar and 500 ± 40 °C). Lawsonite-blueschists are exposed as blocks along the extensional shear zone (PT= 14 ± 2 kbar and 370-440 °C). They are possibly associated with low shear stress regime of the initial stage of convergence. Close to the shear zone, the footwall micaschists consist of quartz, phengite, paragonite, chlorite, rutile with syn-kinematic albite porphyroblast formed by pervasive shearing during exhumation. These types of micaschists are tourmaline-bearing and their retrograde nature suggests high-fluid flux along shear zones. Peak metamorphic mineral assemblages are partly preserved in the chloritoid-micaschist farther away from the shear zone representing the zero strain domains during exhumation. Three peak metamorphic assemblages are identified and their PT conditions are constrained by pseudosections produced by Theriak-Domino and by Raman spectra of carbonaceous material: 1) garnet-chloritoid-glaucophane with lawsonite pseudomorphs (P= 17.5 ± 1 kbar, T: 390-450 °C) 2) chloritoid with glaucophane pseudomorphs (P= 16-18 kbar, T: 475 ± 40 °C) and 3) relatively high-Mg chloritoid (17\%) with jadeite pseudomorphs (P= 22-25 kbar; T: 440 ± 30 °C) in addition to phengite, paragonite, quartz, chlorite, rutile and apatite. The last mineral assemblage is interpreted as transformation of the chloritoid + glaucophane assemblage to chloritoid + jadeite paragenesis with increasing pressure. Absence of tourmaline suggests that the chloritoid-micaschist did not interact with B-rich fluids during zero strain exhumation. 40Ar/39Ar phengite age of a pervasively sheared footwall micaschist is constrained to 100.6 ± 1.3 Ma and that of a chloritoid-micaschist is constrained to 91.8 ± 1.8 Ma suggesting exhumation during on-going subduction with a southward younging of the basal accretion and the regional metamorphism. To the south, accretionary wedge consists of blueschist and greenschist facies metabasite, marble and volcanogenic metasediment intercalation. 40Ar/39Ar phengite dating reveals that this part of the wedge is of Middle Jurassic age partly overprinted during the Albian. Emplacement of the Middle Jurassic subduction-accretion complexes is possibly associated with obliquity of the Albian convergence. Peak metamorphic assemblages and PT estimates of the deep-seated oceanic metamorphic sequence suggest tectonic stacking within wedge with different depths of burial. Coupling and exhumation of the distinct metamorphic slices are controlled by decompression of the wedge possibly along a retreating slab. Structurally, decompression of the wedge is evident by an extensional shear zone and the footwall micaschists with syn-kinematic albite porphyroblasts. Post-kinematic garnets with increasing grossular content and pseudomorphing minerals within the chloritoid-micaschists also support decompression model without an extra heating. Thickening of subduction-accretionary complexes is attributed to i) significant amount of clastic sediment supply from the overriding continental domain and ii) deep level basal underplating by propagation of the d{\´e}collement along a retreating slab. Underplating by basal d{\´e}collement propagation and subsequent exhumation of the deep-seated subduction-accretion complexes are connected and controlled by slab rollback creating a necessary space for progressive basal accretion along the plate interface and extension of the wedge above for exhumation of the tectonically thickened metamorphic sequences. This might be the most common mechanism of the tectonic thickening and subsequent exhumation of deep-seated HP/LT subduction-accretion complexes. To the south, the Albian-Turonian accretionary wedge structurally overlies a low-grade volcanic arc sequence consisting of low-grade metavolcanic rocks and overlying metasedimentary succession is exposed north of the İzmir-Ankara-Erzincan suture (İAES), separating Laurasia from Gondwana-derived terranes. The metavolcanic rocks mainly consist of basaltic andesite/andesite and mafic cognate xenolith-bearing rhyolite with their pyroclastic equivalents, which are interbedded with recrystallized pelagic limestone and chert. The metavolcanic rocks are stratigraphically overlain by recrystallized micritic limestone with rare volcanogenic metaclastic rocks. Two groups can be identified based on trace and rare earth element characteristics. The first group consists of basaltic andesite/andesite (BA1) and rhyolite with abundant cognate gabbroic xenoliths. It is characterized by relative enrichment of LREE with respect to HREE. The rocks are enriched in fluid mobile LILE, and strongly depleted in Ti and P reflecting fractionation of Fe-Ti oxides and apatite, which are found in the mafic cognate xenoliths. Abundant cognate gabbroic xenoliths and identical trace and rare earth elements compositions suggest that rhyolites and basaltic andesites/andesites (BA1) are cogenetic and felsic rocks were derived from a common mafic parental magma by fractional crystallization and accumulation processes. The second group consists only of basaltic andesites (BA2) with flat REE pattern resembling island arc tholeiites. Although enriched in LILE, this group is not depleted in Ti or P. Geochemistry of the metavolcanic rocks indicates supra-subduction volcanism evidenced by depletion of HFSE and enrichment of LILE. The arc sequence is sandwiched between an Albian-Turonian subduction-accretionary complex representing the Laurasian active margin and an ophiolitic m{\´e}lange. Absence of continent derived detritus in the arc sequence and its tectonic setting in a wide Cretaceous accretionary complex suggest that the K{\"o}sdağ Arc was intra-oceanic. This is in accordance with basaltic andesites (BA2) with island arc tholeiite REE pattern. Zircons from two metarhyolite samples give Late Cretaceous (93.8 ± 1.9 and 94.4 ± 1.9 Ma) U/Pb ages. Low-grade regional metamorphism of the intra-oceanic arc sequence is constrained 69.9 ± 0.4 Ma by 40Ar/39Ar dating on metamorphic muscovite from a metarhyolite indicating that the arc sequence became part of a wide Tethyan Cretaceous accretionary complex by the latest Cretaceous. The youngest 40Ar/39Ar phengite age from the overlying subduction-accretion complexes is 92 Ma confirming southward younging of an accretionary-type orogenic belt. Hence, the arc sequence represents an intra-oceanic paleo-arc that formed above the sinking Tethyan slab and finally accreted to Laurasian active continental margin. Abrupt non-collisional termination of arc volcanism was possibly associated with southward migration of the arc volcanism similar to the Izu-Bonin-Mariana arc system. The intra-oceanic K{\"o}sdağ Arc is coeval with the obducted supra-subduction ophiolites in NW Turkey suggesting that it represents part of the presumed but missing incipient intra-oceanic arc associated with the generation of the regional supra-subduction ophiolites. Remnants of a Late Cretaceous intra-oceanic paleo-arc and supra-subduction ophiolites can be traced eastward within the Alp-Himalayan orogenic belt. This reveals that Late Cretaceous intra-oceanic subduction occurred as connected event above the sinking Tethyan slab. It resulted as arc accretion to Laurasian active margin and supra-subduction ophiolite obduction on Gondwana-derived terranes.}, language = {en} } @phdthesis{Priegnitz2015, author = {Priegnitz, Mike}, title = {Development of geophysical methods to characterize methane hydrate reservoirs on a laboratory scale}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-89321}, school = {Universit{\"a}t Potsdam}, pages = {X, 99}, year = {2015}, abstract = {Gashydrate sind kristalline Feststoffe bestehend aus Wasser und Gasmolek{\"u}len. Sie sind stabil bei erh{\"o}hten Dr{\"u}cken und niedrigen Temperaturen. Nat{\"u}rliche Hydratvorkommen treten daher an Kontinentalh{\"a}ngen, in Permafrostb{\"o}den und in tiefen Seen sowie Binnenmeeren auf. Bei der Hydratbildung orientieren sich die Wassermolek{\"u}le neu und bilden sogenannte K{\"a}figstrukturen, in die Gas eingelagert werden kann. Aufgrund des hohen Drucks bei der Hydratbildung k{\"o}nnen große Mengen an Gas in die Hydratstruktur eingebaut werden. Das Volumenverh{\"a}ltnis von Wasser zu Gas kann dabei bis zu 1:172 bei 0°C und Atmosph{\"a}rendruck betragen. Nat{\"u}rliche Gashydrate enthalten haupts{\"a}chlich Methan. Da Methan sowohl ein Treibhausgas als auch ein Brenngas ist, stellen Gashydrate gleichermaßen eine potentielle Energieressource sowie eine m{\"o}gliche Quelle f{\"u}r Treibhausgase dar. Diese Arbeit untersucht die physikalischen Eigenschaften von Methanhydrat ges{\"a}ttigten Sedimentproben im Labormaßstab. Dazu wurde ein großer Reservoirsimulator (LARS) mit einer eigens entwickelten elektrischen Widerstandstomographie ausger{\"u}stet, die das erste Mal an hydratges{\"a}ttigten Sedimentproben unter kontrollierten Temperatur-, Druck-, und Hydrats{\"a}ttigungsbedingungen im Labormaßstab angewendet wurde. {\"U}blicherweise ist der Porenraum von (marinen) Sedimenten mit elektrisch gut leitendem Salzwasser gef{\"u}llt. Da Hydrate einen elektrischen Isolator darstellen, ergeben sich große Kontraste hinsichtlich der elektrischen Eigenschaften im Porenraum w{\"a}hrend der Hydratbildung und -zersetzung. Durch wiederholte Messungen w{\"a}hrend der Hydraterzeugung ist es m{\"o}glich die r{\"a}umliche Widerstandsverteilung in LARS aufzuzeichnen. Diese Daten bilden in der Folge die Grundlage f{\"u}r eine neue Auswerteroutine, welche die r{\"a}umliche Widerstandsverteilung in die r{\"a}umliche Verteilung der Hydrats{\"a}ttigung {\"u}berf{\"u}hrt. Dadurch ist es m{\"o}glich, die sich {\"a}ndernde Hydrats{\"a}ttigung sowohl r{\"a}umlich als auch zeitlich hoch aufgel{\"o}st w{\"a}hrend der gesamten Hydraterzeugungsphase zu verfolgen. Diese Arbeit zeigt, dass die entwickelte Widerstandstomographie eine gute Datenqualit{\"a}t aufwies und selbst geringe Hydrats{\"a}ttigungen innerhalb der Sedimentprobe detektiert werden konnten. Bei der Umrechnung der Widerstandsverteilung in lokale Hydrat-S{\"a}ttigungswerte wurden die besten Ergebnisse mit dem Archie-var-phi Ansatz erzielt, der die zunehmende Hydratphase dem Sedimentger{\"u}st zuschreibt, was einer Abnahme der Porosit{\"a}t gleichkommt. Die Widerstandsmessungen zeigten weiterhin, dass die schnelle Hydraterzeugung im Labor zur Ausbildung von kleinen Hydratkristallen f{\"u}hrte, die dazu neigten, zu rekristalliesieren. Es wurden weiterhin Hydrat-Abbauversuche durchgef{\"u}hrt, bei denen die Hydratphase {\"u}ber Druckerniedrigung in Anlehnung an den 2007/2008 Mallik Feldtest zersetzt wurde. Dabei konnte beobachtet werden, dass die Muster der Gas- undWasserflussraten im Labor zum Teil gut nachgebildet werden konnten, jedoch auch aufbaubedingte Abweichungen auftraten. In zwei weiteren Langzeitversuchen wurde die Realisierbarkeit und das Verhalten bei CO2-CH4-Hydrat Austauschversuchen in LARS untersucht. Das tomographische Messsystem wurde dabei genutzt um w{\"a}hrend der CH4 Hydrat Aufbauphase die Hydratverteilung innerhalb der Sedimentprobe zu {\"u}berwachen. Im Zuge der anschließenden CO2-Injektion konnte mithilfe der Widerstandstomographie die sich ausbreitende CO2-Front {\"u}berwacht und der Zeitpunkt des CO2 Durchbruchs identifiziert werden.}, language = {en} }