@article{ScherlerSchwanghart2020,
  author    = {Scherler, Dirk and Schwanghart, Wolfgang},
  title     = {Drainage divide networks},
  series = {Earth surface dynamics},
  volume    = {8},
  journal   = {Earth surface dynamics},
  number    = {2},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {2196-6311},
  doi       = {10.5194/esurf-8-261-2020},
  pages     = {261 -- 274},
  year      = {2020},
  abstract  = {Drainage divides are organized into tree-like networks that may record information about drainage divide mobility. However, views diverge about how to best assess divide mobility. Here, we apply a new approach of automatically extracting and ordering drainage divide networks from digital elevation models to results from landscape evolution model experiments. We compared landscapes perturbed by strike-slip faulting and spatiotemporal variations in erodibility to a reference model to assess which topographic metrics (hillslope relief, flow distance, and chi) are diagnostic of divide mobility. Results show that divide segments that are a minimum distance of similar to 5 km from river confluences strive to attain constant values of hillslope relief and flow distance to the nearest stream. Disruptions of such patterns can be related to mobile divides that are lower than stable divides, closer to streams, and often asymmetric in shape. In general, we observe that drainage divides high up in the network, i.e., at great distances from river confluences, are more susceptible to disruptions than divides closer to these confluences and are thus more likely to record disturbance for a longer time period. We found that across-divide differences in hillslope relief proved more useful for assessing divide migration than other tested metrics. However, even stable drainage divide networks exhibit across-divide differences in any of the studied topographic metrics. Finally, we propose a new metric to quantify the connectivity of divide junctions.},
  language  = {en}
}
@article{SieberBrinkLeysetal.2020,
  author    = {Sieber, Melanie Jutta and Brink, Frank J. and Leys, Clyde and King, Penelope L. and Henley, Richard W.},
  title     = {Prograde and retrograde metasomatic reactions in mineralised magnesium- silicate skarn in the Cu-Au Ertsberg East Skarn System, Ertsberg, Papua Province, Indonesia},
  series = {Ore geology reviews},
  volume    = {125},
  journal   = {Ore geology reviews},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0169-1368},
  doi       = {10.1016/j.oregeorev.2020.103697},
  pages     = {14},
  year      = {2020},
  abstract  = {The 2.7-2.9 Ma Ertsberg East Skarn System (EESS) is a world-class Cu-Au skarn that formed within and adjacent to an intrusion within a paleodepth of 0.5 km and > 2.5 km. Its economic mineralisation developed by sustained reaction of magmatic fluid with contact metamorphosed siliciclastic and carbonate rocks at the margin of the adjacent Ertsberg quartz monzodiorite intrusion. Based on high-resolution mineral mapping, chemical analysis and thermodynamic calculations, the multistage formation processes of the exoskarn components of the EESS are examined in the context of changing pressure, temperature, fluid composition and fluid phase. We show that contact metamorphism of dolomitic sediments occurred at 51 +/- 5 MPa, between 700 degrees C and 800 degrees C and in the presence of a H2O-CO2-fluid containing similar to 10 to similar to 70 mol\% CO2. This prograde metamorphism formed a forsterite + diopside + calcite + phlogopite + spinel assemblage. Such forsterite-dominated skarns account for similar to 55 vol\% of the EESS exoskarns. Rare pargasite (previously unrecognized in this deposit) formed locally in the metamorphosed carbonate sequence where the protolith was composed of supratidal evaporites with dolomitic carbonate and interlayered calc-silicate rocks. The subsequent flux of a lower pressure magmatic gas containing SO2(g) caused sulphate metasomatism. This high temperature gas alteration of the metamorphic assemblage also caused skarn Cu-Fe-sulphide mineralisation. The influx of a SO2 gas through fracture permeability occurred at a temperature between similar to 600 and 700 degrees C and caused calcite to be replaced by anhydrite, with the coupled release of H2S(g). This in-situ release of H2S(g) scavenged trace Cu from the gas phase to deposit Cu-Fe-sulphides, which make the economic value of the distinct. We demonstrate that the formation of metal sulphides within forsterite skarns of the Ertsberg East Skarn System required a minimum flux of similar to 1,050 Mt SO2(g) and show that volcanic degassing may have occurred over a time span of similar to 3,900 years. As the system waned, the ambient fluid resulted in partial retrograde serpentinization of olivine and diopside without carbonation, and at temperatures sufficiently high to preserve anhydrite.},
  language  = {en}
}
@article{ZhangYangJomaaetal.2020,
  author    = {Zhang, Xiaolin and Yang, Xiaoqiang and Jomaa, Seifeddine and Rode, Michael},
  title     = {Analyzing impacts of seasonality and landscape gradient on event-scale nitrate-discharge dynamics based on nested high-frequency monitoring},
  series = {Journal of hydrology},
  volume    = {591},
  journal   = {Journal of hydrology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0022-1694},
  doi       = {10.1016/j.jhydrol.2020.125585},
  pages     = {12},
  year      = {2020},
  abstract  = {Increasingly available high-frequency data during storm events, when hydrological dynamics most likely activate nitrate storage-flux exchanges, reveal insights into catchment nitrate dynamics. In this study, we explored impacts of seasonality and landscape gradients on nitrate concentration-discharge (C-Q) hysteresis patterns in the Selke catchment, central Germany, which has heterogeneous combinations of meteorological, hydrogeological and land use conditions. Three nested gauging stations established along the main Selke River captured flow and nitrate export dynamics from the uppermost subcatchment (mixed forest and arable land), middle subcatchment (pure steep forest) and lowermost subcatchment (arable and urban land). We collected continuous high-frequency (15-min) discharge and nitrate concentration data from 2012 to 2017 and analyzed the 223 events detected at all three stations. A dominant hysteresis pattern in the uppermost and middle subcatchments was counter-clockwise and combined with an accretion effect, indicating many proximal and mobilized distal nitrate sources. However, 66\% of all events at the catchment outlet experienced a dilution effect, possibly due to mechanisms that vary seasonally. During wetting/wet periods (October-March), it was combined mainly with a counter-clockwise pattern due to the dominance of event runoff volume from the uppermost and middle subcatchments. During drying/dry periods (April-September), however, it was combined mainly with a clockwise pattern due to occasional quick surface flows from lowland near-stream urban areas. In addition, the clockwise hysteresis occurred mainly from May-October during mostly drying/dry periods at all three sites, indicating little distal nitrate transport in response to the low terrestrial hydrological connectivity, especially in the lowermost dry and flat sub-catchment. This comprehensive analysis (i.e., clockwise vs. counter-clockwise, accretion vs. dilution) enables in-depth analysis of nitrate export mechanisms during certain periods under different landscape conditions. Specific combination of C-Q relationships could identify target locations for agricultural management actions that decrease nitrate output. Therefore, we strongly encourage long-term multisite and high-frequency monitoring strategies in heterogeneous nested catchment(s), which can help understand process mechanisms, generate data for physical-based water-quality modeling and provide guidance for water and agricultural management.},
  language  = {en}
}
@article{AlbrechtWinkelmannLevermann2020,
  author    = {Albrecht, Torsten and Winkelmann, Ricarda and Levermann, Anders},
  title     = {Glacial-cycle simulations of the Antarctic Ice Sheet with the Parallel Ice Sheet Model (PISM)},
  series = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  volume    = {14},
  journal   = {The Cryosphere : TC ; an interactive open access journal of the European Geosciences Union},
  number    = {2},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1994-0416},
  doi       = {10.5194/tc-14-599-2020},
  pages     = {599 -- 632},
  year      = {2020},
  abstract  = {Simulations of the glacial-interglacial history of the Antarctic Ice Sheet provide insights into dynamic threshold behavior and estimates of the ice sheet's contributions to global sea-level changes for the past, present and future. However, boundary conditions are weakly constrained, in particular at the interface of the ice sheet and the bedrock. Also climatic forcing covering the last glacial cycles is uncertain, as it is based on sparse proxy data. <br /> We use the Parallel Ice Sheet Model (PISM) to investigate the dynamic effects of different choices of input data, e.g., for modern basal heat flux or reconstructions of past changes of sea level and surface temperature. As computational resources are limited, glacial-cycle simulations are performed using a comparably coarse model grid of 16 km and various parameterizations, e.g., for basal sliding, iceberg calving, or for past variations in precipitation and ocean temperatures. In this study we evaluate the model's transient sensitivity to corresponding parameter choices and to different boundary conditions over the last two glacial cycles and provide estimates of involved uncertainties. We also discuss isolated and combined effects of climate and sea-level forcing. Hence, this study serves as a "cookbook" for the growing community of PISM users and paleo-ice sheet modelers in general. <br /> For each of the different model uncertainties with regard to climatic forcing, ice and Earth dynamics, and basal processes, we select one representative model parameter that captures relevant uncertainties and motivates corresponding parameter ranges that bound the observed ice volume at present. The four selected parameters are systematically varied in a parameter ensemble analysis, which is described in a companion paper.},
  language  = {en}
}
@article{FigueroaVillegasWeissHongnetal.2020,
  author    = {Figueroa Villegas, Sara and Weiss, Jonathan R. and Hongn, Fernando D. and Pingel, Heiko and Escalante, Leonardo and El{\´i}as, Leonardo and Aranda-Viana, R. Germ{\´a}n and Strecker, Manfred},
  title     = {Late pleistocene to recent deformation in the thick-skinned fold-and-thrust belt of Northwestern Argentina (Central Calchaqui Valley, 26 degrees S)},
  series = {Tectonics / American Geophysical Union, AGU ; European Geophysical Society, EGS},
  volume    = {40},
  journal   = {Tectonics / American Geophysical Union, AGU ; European Geophysical Society, EGS},
  number    = {1},
  publisher = {American Geophysical Union},
  address   = {Washington, DC},
  issn      = {0278-7407},
  doi       = {10.1029/2020TC006394},
  pages     = {20},
  year      = {2020},
  abstract  = {The thick-skinned fold-and-thrust belt on the eastern flank of the Andean Plateau in northwestern Argentina (NWA) is a zone of active contractional deformation characterized by fault-bounded mountain ranges with no systematic spatiotemporal pattern of tectonic activity. In contrast, the thin-skinned Subandean fold-and-thrust belt of northern Argentina and southern Bolivia is characterized primarily by in-sequence (i.e., west to east) fault progression, with a narrow zone of Quaternary deformation focused at the front of the orogenic wedge. To better understand how recent deformation is accommodated across these mountain ranges and the Argentinian portion of the orogen in particular, estimating and comparing deformation rates and patterns across different timescales is essential. We present Late Pleistocene shortening rates for the central Calchaqui intermontane valley in NWA associated with at least three episodes of deformation. Global Positioning System data for the same region reveal a gradual decrease in horizontal surface velocities from the Eastern Cordillera toward the foreland, which contrasts with the rapid velocity gradient associated with a locked decollement in the Subandean Ranges of southern Bolivia. Our new results represent a small view of regional deformation that, when considered in combination with the shallow crustal seismicity and decadal-scale surface velocities, support the notion that strain release in NWA is associated with numerous slowly deforming structures that are distributed throughout the orogen.},
  language  = {en}
}
@article{WetzelKempkaKuehn2020,
  author    = {Wetzel, Maria and Kempka, Thomas and K{\"u}hn, Michael},
  title     = {Hydraulic and mechanical impacts of pore space alterations within a sandstone quantified by a flow velocity-dependent precipitation approach},
  series = {Materials},
  volume    = {13},
  journal   = {Materials},
  number    = {14},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1944},
  doi       = {10.3390/ma13143100},
  pages     = {20},
  year      = {2020},
  abstract  = {Geochemical processes change the microstructure of rocks and thereby affect their physical behaviour at the macro scale. A micro-computer tomography (micro-CT) scan of a typical reservoir sandstone is used to numerically examine the impact of three spatial alteration patterns on pore morphology, permeability and elastic moduli by correlating precipitation with the local flow velocity magnitude. The results demonstrate that the location of mineral growth strongly affects the permeability decrease with variations by up to four orders in magnitude. Precipitation in regions of high flow velocities is characterised by a predominant clogging of pore throats and a drastic permeability reduction, which can be roughly described by the power law relation with an exponent of 20. A continuous alteration of the pore structure by uniform mineral growth reduces the permeability comparable to the power law with an exponent of four or the Kozeny-Carman relation. Preferential precipitation in regions of low flow velocities predominantly affects smaller throats and pores with a minor impact on the flow regime, where the permeability decrease is considerably below that calculated by the power law with an exponent of two. Despite their complete distinctive impact on hydraulics, the spatial precipitation patterns only slightly affect the increase in elastic rock properties with differences by up to 6.3\% between the investigated scenarios. Hence, an adequate characterisation of the spatial precipitation pattern is crucial to quantify changes in hydraulic rock properties, whereas the present study shows that its impact on elastic rock parameters is limited. The calculated relations between porosity and permeability, as well as elastic moduli can be applied for upscaling micro-scale findings to reservoir-scale models to improve their predictive capabilities, what is of paramount importance for a sustainable utilisation of the geological subsurface.},
  language  = {en}
}
@article{ChengMilsch2020,
  author    = {Cheng, Chaojie and Milsch, Harald},
  title     = {Evolution of fracture aperture in quartz sandstone under hydrothermal conditions},
  series = {Minerals},
  volume    = {10},
  journal   = {Minerals},
  number    = {8},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2075-163X},
  doi       = {10.3390/min10080657},
  pages     = {18},
  year      = {2020},
  abstract  = {Fractures efficiently affect fluid flow in geological formations, and thereby determine mass and energy transport in reservoirs, which are not least exploited for economic resources. In this context, their response to mechanical and thermal changes, as well as fluid-rock interactions, is of paramount importance. In this study, a two-stage flow-through experiment was conducted on a pure quartz sandstone core of low matrix permeability, containing one single macroscopic tensile fracture. In the first short-term stage, the effects of mechanical and hydraulic aperture on pressure and temperature cycles were investigated. The purpose of the subsequent intermittent-flow long-term (140 days) stage was to constrain the evolution of the geometrical and hydraulic fracture properties resulting from pressure solution. Deionized water was used as the pore fluid, and permeability, as well as the effluent Si concentrations, were systematically measured. Overall, hydraulic aperture was shown to be significantly less affected by pressure, temperature and time, in comparison to mechanical aperture. During the long-term part of the experiment at 140 degrees C, the effluent Si concentrations likely reached a chemical equilibrium state within less than 8 days of stagnant flow, and exceeded the corresponding hydrostatic quartz solubility at this temperature. This implies that the pressure solution was active at the contacting fracture asperities, both at 140 degrees C and after cooling to 33 degrees C. The higher temperature yielded a higher dissolution rate and, consequently, a faster attainment of chemical equilibrium within the contact fluid. X-ray mu CT observations evidenced a noticeable increase in fracture contact area ratio, which, in combination with theoretical considerations, implies a significant decrease in mechanical aperture. In contrast, the sample permeability, and thus the hydraulic fracture aperture, virtually did not vary. In conclusion, pressure solution-induced fracture aperture changes are affected by the degree of time-dependent variations in pore fluid composition. In contrast to the present case of a quasi-closed system with mostly stagnant flow, in an open system with continuous once-through fluid flow, the activity of the pressure solution may be amplified due to the persistent fluid-chemical nonequilibrium state, thus possibly enhancing aperture and fracture permeability changes.},
  language  = {en}
}
@article{CookTurowskiHovius2020,
  author    = {Cook, Kristen L. and Turowski, Jens M. and Hovius, Niels},
  title     = {Width control on event-scale deposition and evacuation of sediment in bedrock-confined channels},
  series = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group},
  volume    = {45},
  journal   = {Earth surface processes and landforms : the journal of the British Geomorphological Research Group},
  number    = {14},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0197-9337},
  doi       = {10.1002/esp.4993},
  pages     = {3702 -- 3713},
  year      = {2020},
  abstract  = {In mixed bedrock-alluvial rivers, the response of the system to a flood event can be affected by a number of factors, including coarse sediment availability in the channel, sediment supply from the hillslopes and upstream, flood sequencing and coarse sediment grain size distribution. However, the impact of along-stream changes in channel width on bedload transport dynamics remains largely unexplored. We combine field data, theory and numerical modelling to address this gap. First, we present observations from the Daan River gorge in western Taiwan, where the river flows through a 1 km long 20-50 m wide bedrock gorge bounded upstream and downstream by wide braidplains. We documented two flood events during which coarse sediment evacuation and redeposition appear to cause changes of up to several metres in channel bed elevation. Motivated by this case study, we examined the relationships between discharge, channel width and bedload transport capacity, and show that for a given slope narrow channels transport bedload more efficiently than wide ones at low discharges, whereas wider channels are more efficient at high discharges. We used the model sedFlow to explore this effect, running a random sequence of floods through a channel with a narrow gorge section bounded upstream and downstream by wider reaches. Channel response to imposed floods is complex, as high and low discharges drive different spatial patterns of erosion and deposition, and the channel may experience both of these regimes during the peak and recession periods of each flood. Our modelling suggests that width differences alone can drive substantial variations in sediment flux and bed response, without the need for variations in sediment supply or mobility. The fluctuations in sediment transport rates that result from width variations can lead to intermittent bed exposure, driving incision in different segments of the channel during different portions of the hydrograph.},
  language  = {en}
}
@article{WieczorekHerzschuh2020,
  author    = {Wieczorek, Mareike and Herzschuh, Ulrike},
  title     = {Compilation of relative pollen productivity (RPP) estimates and taxonomically harmonised RPP datasets for single continents and Northern Hemisphere extratropics},
  series = {Earth system science data : ESSD},
  volume    = {12},
  journal   = {Earth system science data : ESSD},
  number    = {4},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1866-3508},
  doi       = {10.5194/essd-12-3515-2020},
  pages     = {3515 -- 3528},
  year      = {2020},
  abstract  = {Relative pollen productivity (RPP) estimates are fractionate values, often in relation to Poaceae, that allow vegetation cover to be estimated from pollen counts with the help of models. RPP estimates are especially used in the scientific community in Europe and China, with a few studies in North America. Here we present a comprehensive compilation of available northern hemispheric RPP studies and their results arising from 51 publications with 60 sites and 131 taxa. This compilation allows scientists to identify data gaps in need of further RPP analyses but can also aid them in finding an RPP set for their study region. We also present a taxonomically harmonised, unified RPP dataset for the Northern Hemisphere and subsets for North America (including Greenland), Europe (including arctic Russia), and China, which we generated from the available studies. The unified dataset gives the mean RPP for 55 harmonised taxa as well as fall speeds, which are necessary to reconstruct vegetation cover from pollen counts and RPP values. Data are openly available at https://doi.org/10.1594/PANGAEA.922661 (Wieczorek and Herzschuh, 2020).},
  language  = {en}
}
@article{HeeschenJanochaSpangenbergetal.2020,
  author    = {Heeschen, Katja U. and Janocha, Julian and Spangenberg, Erik and Schicks, Judith Maria and Giese, Ronny},
  title     = {The impact of ice on the tensile strength of unconsolidated sand},
  series = {Marine and petroleum geology},
  volume    = {122},
  journal   = {Marine and petroleum geology},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0264-8172},
  doi       = {10.1016/j.marpetgeo.2020.104607},
  pages     = {9},
  year      = {2020},
  abstract  = {Tensile strength is an important parameter when it comes to predictions of potential fracturing of sediments by natural processes such as the emplacement of ice or gas hydrate lenses, as well as anthropogenic fracturing or else the stability of engineering constructions such as boreholes. Yet, tensile strength (sigma(tau)) measurements of unconsolidated ice-bearing or gas hydrate-bearing sands are scarce and affected by a large variability. <br /> In the course of the SUGAR project we successfully used ice as a model for pore-filling and "load-bearing" gas hydrate in sand to determine compressional wave velocity. We were thus able to verify comparable formation characteristics and morphologies of ice and gas hydrate within the pore space. As these are important values for the tensile strength of ice/hydrate-bearing sands, ice was also used as a model for hydrate-bearing sands, despite differences in the mechanical behavior and strength of pure ice and gas hydrate. Water-saturated sand cores with ice saturations (S-ice) between 0 and 100\% were tested at -6.8 degrees C. The varying S-ice were a result of the freezing point depression caused by saline solutions of different concentrations. The sigma(tau) was directly determined using a sleeve-fracturing test with an internal pressure that was created within the frozen samples. The setup was also adapted to fit a pressure vessel for tests using confining pressure. <br /> The correlation of S-ice - sigma(tau) shows an exponential increase of sigma(tau) with S-ice. Whereas at S-ice < 60\% the increase is small, it is large at S-ice > 80\%. In conjunction with the change in strength, the viscoelastic behavior changes. A clear peak strength occurs at S-ice > 80\%. We conclude that given 60\% < S-ice < 80\% the pore-filling morphology of the ice converts into a frame-building habitus and at S-ice > 80\% the frame gains strength while the amount of residual water decreases. Tensile failure and cracking now exceed grain boundary sliding as the prevailing failure mode. The ice morphology in the sand is non-cementing and comparable to a gas hydrate-sand mixture.},
  language  = {en}
}
@article{WeatherillKothaCotton2020,
  author    = {Weatherill, Graeme and Kotha, Sreeram Reddy and Cotton, Fabrice},
  title     = {Re-thinking site amplification in regional seismic risk assessment},
  series = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute},
  volume    = {36},
  journal   = {Earthquake spectra : the professional journal of the Earthquake Engineering Research Institute},
  number    = {1_SUPPL},
  publisher = {Sage Publishing},
  address   = {Thousand Oaks, CA},
  issn      = {8755-2930},
  doi       = {10.1177/8755293019899956},
  pages     = {274 -- 297},
  year      = {2020},
  abstract  = {Probabilistic assessment of seismic hazard and risk over a geographical region presents the modeler with challenges in the characterization of the site amplification that are not present in site-specific assessment. Using site-to-site residuals from a ground motion model fit to observations from the Japanese KiK-net database, correlations between measured local amplifications and mappable proxies such as topographic slope and geology are explored. These are used subsequently to develop empirical models describing amplification as a direct function of slope, conditional upon geological period. These correlations also demonstrate the limitations of inferring 30-m shearwave velocity from slope and applying them directly into ground motion models. Instead, they illustrate the feasibility of deriving spectral acceleration amplification factors directly from sets of observed records, which are calibrated to parameters that can be mapped uniformly on a regional scale. The result is a geologically calibrated amplification model that can be incorporated into national and regional seismic hazard and risk assessment, ensuring that the corresponding total aleatory variability reflects the predictive capability of the mapped site proxy.},
  language  = {en}
}
@article{PutraPradhanKropp2020,
  author    = {Putra, Muhammad Panji Islam Fajar and Pradhan, Prajal and Kropp, J{\"u}rgen},
  title     = {A systematic analysis of Water-Energy-Food security nexus},
  series = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man},
  volume    = {728},
  journal   = {The science of the total environment : an international journal for scientific research into the environment and its relationship with man},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0048-9697},
  doi       = {10.1016/j.scitotenv.2020.138451},
  pages     = {9},
  year      = {2020},
  abstract  = {Most South Asian countries have challenges in ensuring water, energy, and food (WEF) security, which are often interacting positively or negatively. To address these challenges, the nexus approach provides a framework to identify the interactions of the WEF sectors as an integrated system. However, most nexus studies only qualitatively discuss the interactions between these sectors. This study conducts a systematic analysis of the WEF security nexus in South Asia by using open data sources at the country scale. We analyze interactions between the WEF sectors statistically, defining positive and negative correlations between the WEF security indicators as synergies and trade-offs, respectively. By creating networks of the synergies and trade-offs, we further identify most positively and negatively influencing indicators in the WEF security nexus. We observe a larger share of trade-offs than synergies within the water and energy sectors and a larger share of synergies than trade-offs among the WEF sectors for South Asia. However, these observations vary across the South Asian countries. Our analysis highlights that strategies on promoting sustainable energy and discouraging fossil fuel use could have overall positive effects on the WEF security nexus in the countries. This study provides evidence for considering the WEF security nexus as an integrated system rather than just a combination of three different sectors or securities.},
  language  = {en}
}
@article{Specht2020,
  author    = {Specht, Sebastian von},
  title     = {ICBM Integrated Combined Baseline Modification},
  series = {Seismological research letters},
  volume    = {91},
  journal   = {Seismological research letters},
  number    = {1},
  publisher = {Seismological Society of America, Eastern Section},
  address   = {Boulder, Colo.},
  issn      = {0895-0695},
  doi       = {10.1785/0220190134},
  pages     = {475 -- 487},
  year      = {2020},
  abstract  = {Accelerograms are the primary source for characterizing strong ground motion. It is therefore of paramount interest to have high-quality recordings free from any nonphysical contamination. Frequently, accelerograms are affected by baseline jumps and drifts, either related to the instrument and/or a major earthquake. In this work, I propose a correction method for these undesired baseline drifts based on segmented linear least squares. The algorithm operates on the integrated waveforms and combines all three instrument components to estimate a model that modifies the baseline to be at zero continuously. The procedure consists of two steps: first a suite of models with variable numbers of discontinuities is derived for all three instrument components. During this process, the number of discontinuities is reduced in a parsimonious way, for example, two very close discontinuities are merged into a single one. In the second step, the optimal model is selected on the basis of the Bayesian information criterion. I exemplify the application on synthetic waveforms with known discontinuities and on observed waveforms from a unified strong-motion database of the Japan Meteorological Agency (JMA) and the National Research Institute for Earth Science and Disaster Prevention (NIED, Japan) networks for the major events of the 2016 Kumamoto earthquakes. After the baseline jump correction, the waveforms are furthermore corrected for displacement according to Wang et al.(2011). The resulting displacements are comparable to the Interferometric Synthetic Aperture Radar-derived displacement estimates for the Kumamoto earthquake sequence.},
  language  = {en}
}
@article{KaramzadehToularoudHeimannDahmetal.2020,
  author    = {Karamzadeh Toularoud, Nasim and Heimann, Sebastian and Dahm, Torsten and Kr{\"u}ger, Frank},
  title     = {Earthquake source arrays},
  series = {Geophysical journal international},
  volume    = {221},
  journal   = {Geophysical journal international},
  number    = {1},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggaa002},
  pages     = {352 -- 370},
  year      = {2020},
  abstract  = {A collection of earthquake sources recorded at a single station, under specific conditions, are considered as a source array (SA), that is interpreted as if earthquake sources originate at the station location and are recorded at the source location. Then, array processing methods, that is array beamforming, are applicable to analyse the recorded signals. A possible application is to use source array multiple event techniques to locate and characterize near-source scatterers and structural interfaces. In this work the aim is to facilitate the use of earthquake source arrays by presenting an automatic search algorithm to configure the source array elements. We developed a procedure to search for an optimal source array element distribution given an earthquake catalogue including accurate origin time and hypocentre locations. The objective function of the optimization process can be flexibly defined for each application to ensure the prerequisites (criteria) of making a source array. We formulated four quantitative criteria as subfunctions and used the weighted sum technique to combine them in one single scalar function. The criteria are: (1) to control the accuracy of the slowness vector estimation using the time domain beamforming method, (2) to measure the waveform coherency of the array elements, (3) to select events with lower location error and (4) to select traces with high energy of specific phases, that is, sp- or ps-phases. The proposed procedure is verified using synthetic data as well as real examples for the Vogtland region in Northwest Bohemia. We discussed the possible application of the optimized source arrays to identify the location of scatterers in the velocity model by presenting a synthetic test and an example using real waveforms.},
  language  = {en}
}
@article{MorishitaLazeckyWrightetal.2020,
  author    = {Morishita, Yu and Lazecky, Milan and Wright, Tim J. and Weiss, Jonathan R. and Elliott, John R. and Hooper, Andy},
  title     = {LiCSBAS},
  series = {Remote sensing},
  volume    = {12},
  journal   = {Remote sensing},
  number    = {3},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {2072-4292},
  doi       = {10.3390/rs12030424},
  pages     = {29},
  year      = {2020},
  abstract  = {For the past five years, the 2-satellite Sentinel-1 constellation has provided abundant and useful Synthetic Aperture Radar (SAR) data, which have the potential to reveal global ground surface deformation at high spatial and temporal resolutions. However, for most users, fully exploiting the large amount of associated data is challenging, especially over wide areas. To help address this challenge, we have developed LiCSBAS, an open-source SAR interferometry (InSAR) time series analysis package that integrates with the automated Sentinel-1 InSAR processor (LiCSAR). LiCSBAS utilizes freely available LiCSAR products, and users can save processing time and disk space while obtaining the results of InSAR time series analysis. In the LiCSBAS processing scheme, interferograms with many unwrapping errors are automatically identified by loop closure and removed. Reliable time series and velocities are derived with the aid of masking using several noise indices. The easy implementation of atmospheric corrections to reduce noise is achieved with the Generic Atmospheric Correction Online Service for InSAR (GACOS). Using case studies in southern Tohoku and the Echigo Plain, Japan, we demonstrate that LiCSBAS applied to LiCSAR products can detect both large-scale (>100 km) and localized (similar to km) relative displacements with an accuracy of <1 cm/epoch and similar to 2 mm/yr. We detect displacements with different temporal characteristics, including linear, periodic, and episodic, in Niigata, Ojiya, and Sanjo City, respectively. LiCSBAS and LiCSAR products facilitate greater exploitation of globally available and abundant SAR datasets and enhance their applications for scientific research and societal benefit.},
  language  = {en}
}
@article{ZhuCottonPilz2020,
  author    = {Zhu, Chuanbin and Cotton, Fabrice and Pilz, Marco},
  title     = {Detecting site resonant frequency using HVSR},
  series = {Bulletin of the Seismological Society of America : BSSA},
  volume    = {110},
  journal   = {Bulletin of the Seismological Society of America : BSSA},
  number    = {2},
  publisher = {Seismological Society of America},
  address   = {El Cerito, Calif.},
  issn      = {0037-1106},
  doi       = {10.1785/0120190186},
  pages     = {427 -- 440},
  year      = {2020},
  abstract  = {In this investigation, we examine the uncertainties using the horizontal-to-vertical spectral ratio (HVSR) technique on earthquake recordings to detect site resonant frequencies at 207 KiK-net sites. Our results show that the scenario dependence of response (pseudospectral acceleration) spectral ratio could bias the estimates of resonant frequencies for sites having multiple significant peaks with comparable amplitudes. Thus, the Fourier amplitude spectrum (FAS) should be preferred in computing HVSR. For more than 80\% of the investigated sites, the first peak (in the frequency domain) on the average HVSR curve over multiple sites coincides with the highest peak. However, for sites with multiple peaks, the highest peak frequency (f(p)) is less susceptible to the selection criteria of significant peaks and the extent of smoothing to spectrum than the first peak frequency (f(0)). Meanwhile, in comparison to the surface-to-borehole spectral ratio, f(0) tends to underestimate the predominant frequency (at which the largest amplification occurs) more than f(p). In addition, in terms of characterizing linear site response, f(p) shows a better overall performance than f(0). Based on these findings, we thus recommend that seismic network operators provide f(p) on the average HVSRFAS curve as a priority, ideally together with the average HVSRFAS curve in site characterization.},
  language  = {en}
}
@article{TronickeAllroggenBiermannetal.2020,
  author    = {Tronicke, Jens and Allroggen, Niklas and Biermann, Felix and Fanselow, Florian and Guillemoteau, Julien and Krauskopf, Christof and L{\"u}ck, Erika},
  title     = {Rapid multiscale analysis of near-surface geophysical anomaly maps},
  series = {Geophysics},
  volume    = {85},
  journal   = {Geophysics},
  number    = {4},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa, Okla.},
  issn      = {0016-8033},
  doi       = {10.1190/GEO2019-0564.1},
  pages     = {B109 -- B118},
  year      = {2020},
  abstract  = {In near- surface geophysics, ground-based mapping surveys are routinely used in a variety of applications including those from archaeology, civil engineering, hydrology, and soil science. The resulting geophysical anomaly maps of, for example, magnetic or electrical parameters are usually interpreted to laterally delineate subsurface structures such as those related to the remains of past human activities, subsurface utilities and other installations, hydrological properties, or different soil types. To ease the interpretation of such data sets, we have developed a multiscale processing, analysis, and visualization strategy. Our approach relies on a discrete redundant wavelet transform (RWT) implemented using cubic-spline filters and the a trous algorithm, which allows to efficiently compute a multiscale decomposition of 2D data using a series of 1D convolutions. The basic idea of the approach is presented using a synthetic test image, whereas our archaeogeophysical case study from northeast Germany demonstrates its potential to analyze and process rather typical geophysical anomaly maps including magnetic and topographic data. Our vertical-gradient magnetic data show amplitude variations over several orders of magnitude, complex anomaly patterns at various spatial scales, and typical noise patterns, whereas our topographic data show a distinct hill structure superimposed by a microtopographic stripe pattern and random noise. Our results demonstrate that the RWT approach is capable to successfully separate these components and that selected wavelet planes can be scaled and combined so that the reconstructed images allow for a detailed, multiscale structural interpretation also using integrated visualizations of magnetic and topographic data. Because our analysis approach is straightforward to implement without laborious parameter testing and tuning, computationally efficient, and easily adaptable to other geophysical data sets, we believe that it can help to rapidly analyze and interpret different geophysical mapping data collected to address a variety of near-surface applications from engineering practice and research.},
  language  = {en}
}
@article{WolfPhamMatthewsetal.2020,
  author    = {Wolf, Sabina and Pham, My and Matthews, Nathanial and Bubeck, Philip},
  title     = {Understanding the implementation gap},
  series = {Climate \& development},
  volume    = {13},
  journal   = {Climate \& development},
  number    = {1},
  publisher = {Taylor \& Francis LTD},
  address   = {Abingdon},
  issn      = {1756-5529},
  doi       = {10.1080/17565529.2020.1724068},
  pages     = {81 -- 94},
  year      = {2020},
  abstract  = {In recent years, nature-based solutions are receiving increasing attention in the field of disaster risk reduction and climate change adaptation as inclusive, no regret approaches. Ecosystem-based adaptation (EbA) can mitigate the impacts of climate change, build resilience and tackle environmental degradation thereby supporting the targets set by the 2030 Agenda, the Paris Agreement and the Sendai Framework. Despite these benefits, EbA is still rarely implemented in practice. To better understand the barriers to implementation, this research examines policy-makers' perceptions of EbA, using an extended version of Protection Motivation Theory as an analytical framework. Through semi-structured interviews with policy-makers at regional and provincial level in Central Vietnam, it was found that EbA is generally considered a promising response option, mainly due to its multiple ecosystem-service benefits. The demand for EbA measures was largely driven by the perceived consequences of natural hazards and climate change. Insufficient perceived response efficacy and time-lags in effectiveness for disaster risk reduction were identified as key impediments for implementation. Pilot projects and capacity building on EbA are important means to overcome these perceptual barriers. This paper contributes to bridging the knowledge-gap on political decision-making regarding EbA and can, thereby, promote its mainstreaming into policy plans.},
  language  = {en}
}
@article{RoetzlerTimmerman2020,
  author    = {R{\"o}tzler, Jochen and Timmerman, Martin Jan},
  title     = {Geochronological and petrological constraints from the evolution in the Saxon Granulite Massif, Germany, on the Variscan continental collision orogeny},
  series = {Journal of metamorphic geology},
  volume    = {39},
  journal   = {Journal of metamorphic geology},
  number    = {1},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0263-4929},
  doi       = {10.1111/jmg.12559},
  pages     = {3 -- 38},
  year      = {2020},
  abstract  = {Controversy over the plate tectonic affinity and evolution of the Saxon granulites in a two- or multi-plate setting during inter- or intracontinental collision makes the Saxon Granulite Massif a key area for the understanding of the Palaeozoic Variscan orogeny. The massif is a large dome structure in which tectonic slivers of metapelite and metaophiolite units occur along a shear zone separating a diapir-like body of high-Pgranulite below from low-Pmetasedimentary rocks above. Each of the upper structural units records a different metamorphic evolution until its assembly with the exhuming granulite body. New age and petrologic data suggest that the metaophiolites developed from early Cambrian protoliths during high-Pamphibolite facies metamorphism in the mid- to late-Devonian and thermal overprinting by the exhuming hot granulite body in the early Carboniferous. A correlation of new Ar-Ar biotite ages with publishedP-T-tdata for the granulites implies that exhumation and cooling of the granulite body occurred at average rates of similar to 8 mm/year and similar to 80 degrees C/Ma, with a drop in exhumation rate from similar to 20 to similar to 2.5 mm/year and a slight rise in cooling rate between early and late stages of exhumation. A time lag ofc. 2 Ma between cooling through the closure temperatures for argon diffusion in hornblende and biotite indicates a cooling rate of 90 degrees C/Ma when all units had assembled into the massif. A two-plate model of the Variscan orogeny in which the above evolution is related to a short-lived intra-Gondwana subduction zone conflicts with the oceanic affinity of the metaophiolites and the timescale ofc. 50 Ma for the metamorphism. Alternative models focusing on the internal Variscan belt assume distinctly different material paths through the lower or upper crust for strikingly similar granulite massifs. An earlier proposed model of bilateral subduction below the internal Variscan belt may solve this problem.},
  language  = {en}
}
@article{ScharfSudoPracejusetal.2020,
  author    = {Scharf, Andreas and Sudo, Masafumi and Pracejus, Bernhard and Mattern, Frank and Callegari, Ivan and Bauer, Wilfried and Scharf, Katharina},
  title     = {Late Lutetian (Eocene) mafic intrusion into shallow marine platform deposits north of the Oman Mountains (Rusayl Embayment) and its tectonic significance},
  series = {Journal of African earth sciences},
  volume    = {170},
  journal   = {Journal of African earth sciences},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {1464-343X},
  doi       = {10.1016/j.jafrearsci.2020.103941},
  pages     = {15},
  year      = {2020},
  abstract  = {A silica undersaturated alkali-olivine basanitic magma intruded the late Paleocene/early Eocene Jafnayn Formation near Muscat. Geochemical analyses indicate that a significant amount of host rock (limestone) was assimilated into the magma. We dated the basanite as 42.7 +/- 1.0 Ma (2 sigma error; late Lutetian), using the whole rock Ar-40/Ar-39 step-wise heating technique. Intrusion occurred in the hanging wall of a major regional extensional shear zone (Frontal Range Fault, FRF) bounding the northern margin of two domes within the Oman Mountains (Jabal Akhdar and Saih Hatat domes). Two shear intervals along the FRF have been documented. The first interval lasted immediately after emplacement of the Semail Ophiolite (latest Cretaceous-early Eocene) while the second and poorly constrained interval was assumed to have occurred during the Oligocene. The proximity of the basanite to the FRF suggests that magma used extensional faults for the upper part of its ascent path. Reactivated Permian rift faults of the Pangaea rift or other preexisting faults may have been used for the lower ascent part. We conclude that the basanite intrusion coincided with the onset of the second deformation interval along the FRF, because (1) the position of the basanite is near a dextral releasing bend, associated with the second shear interval, (2) the overlap of our Ar-40/Ar-39 age with the cooling curves for rocks from the nearby Jabal Akhdar Dome, and (3) the basanite postdates the first FRF deformation episode by > 10 Ma. Thus, the second interval along the FRF had started already during the late Lutetian and probably lasted into the Miocene.},
  language  = {en}
}
@article{WeatherillCotton2020,
  author    = {Weatherill, Graeme and Cotton, Fabrice},
  title     = {A ground motion logic tree for seismic hazard analysis in the stable cratonic region of Europe},
  series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering},
  volume    = {18},
  journal   = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering},
  number    = {14},
  publisher = {Springer Science + Business Media B.V.},
  address   = {Dordrecht},
  issn      = {1570-761X},
  doi       = {10.1007/s10518-020-00940-x},
  pages     = {6119 -- 6148},
  year      = {2020},
  abstract  = {Regions of low seismicity present a particular challenge for probabilistic seismic hazard analysis when identifying suitable ground motion models (GMMs) and quantifying their epistemic uncertainty. The 2020 European Seismic Hazard Model adopts a scaled backbone approach to characterise this uncertainty for shallow seismicity in Europe, incorporating region-to-region source and attenuation variability based on European strong motion data. This approach, however, may not be suited to stable cratonic region of northeastern Europe (encompassing Finland, Sweden and the Baltic countries), where exploration of various global geophysical datasets reveals that its crustal properties are distinctly different from the rest of Europe, and are instead more closely represented by those of the Central and Eastern United States. Building upon the suite of models developed by the recent NGA East project, we construct a new scaled backbone ground motion model and calibrate its corresponding epistemic uncertainties. The resulting logic tree is shown to provide comparable hazard outcomes to the epistemic uncertainty modelling strategy adopted for the Eastern United States, despite the different approaches taken. Comparison with previous GMM selections for northeastern Europe, however, highlights key differences in short period accelerations resulting from new assumptions regarding the characteristics of the reference rock and its influence on site amplification.},
  language  = {en}
}
@article{ZhuPilzCotton2020,
  author    = {Zhu, Chuanbin and Pilz, Marco and Cotton, Fabrice},
  title     = {Evaluation of a novel application of earthquake HVSR in site-specific amplification estimation},
  series = {Soil dynamics and earthquake engineering},
  volume    = {139},
  journal   = {Soil dynamics and earthquake engineering},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0267-7261},
  doi       = {10.1016/j.soildyn.2020.106301},
  pages     = {14},
  year      = {2020},
  abstract  = {Ground response analyses (GRA) model the vertical propagations of SH waves through flat-layered media (1DSH) and are widely carried out to evaluate local site effects in practice. Horizontal-to-vertical spectral ratio (HVSR) technique is a cost-effective approach to extract certain site-specific information, e.g., site fundamental frequency (f(0)), but HVSR values cannot be directly used to approximate the levels of S-wave amplifications. Motivated by the work of Kawase et al. (2019), we propose a procedure to correct earthquake HVSR amplitudes for direct amplification estimations. The empirical correction compensates HVSR by generic vertical amplification spectra categorized by the vertical fundamental frequency (f(0v)) via kappa-means clustering. In this investigation, we evaluate the effectiveness of the corrected HVSR in approximating observed linear amplifications in comparison with 1DSH modellings. We select a total of 90 KiK-net (Kiban Kyoshin network) surface-downhole sites which are found to have no velocity contrasts below their boreholes and thus of which surface-to-borehole spectral ratios (SBSRs) can be taken as their empirical transfer functions (ETFs). 1DSH-based theoretical transfer functions (TTFs) are computed in the linear domain considering uncertainties in Vs profiles through randomizations. Five goodness-of-fit metrics are adopted to gauge the closeness between observed (ETF) and predicted (i.e., TTF and corrected HVSR) amplifications in both amplitude and spectral shape over frequencies from f(0) to 25 Hz. We find that the empirical correction to HVSR is highly effective and achieves a "good match" in both spectral shape and amplitude at the majority of the 90 KiK-net sites, as opposed to less than one-third for the 1DSH modelling. In addition, the empirical correction does not require a velocity model, which GRAs require, and thus has great potentials in seismic hazard assessments.},
  language  = {en}
}
@article{RiedlMelnickMibeietal.2020,
  author    = {Riedl, Simon and Melnick, Daniel and Mibei, Geoffrey K. and Njue, Lucy and Strecker, Manfred},
  title     = {Continental rifting at magmatic centres},
  series = {Journal of the geological society},
  volume    = {177},
  journal   = {Journal of the geological society},
  number    = {1},
  publisher = {Geological Soc. Publ. House},
  address   = {Bath},
  issn      = {0016-7649},
  doi       = {10.1144/jgs2019-021},
  pages     = {153 -- 169},
  year      = {2020},
  abstract  = {The structural evolution of calderas in rifts helps to characterize the spatiotemporal relationships between magmatism, long wavelength crustal deformation and the formation of tectonic deformation zones along the rift axis. We document the structural characteristics of the c. 36 ka old Menengai Caldera located within a young zone of extension in the central Kenya Rift. Field mapping and high-resolution digital surface models show that NNE-striking Holocene normal faults perpendicular to the regional ESE-WNWextension direction dominate the interior sectors of the rift. Inside the caldera, these structures are overprinted by post-collapse doming and faulting of the magmatic centre, resulting in obliquely slipping normal faults bounding a resurgence horst. Radiocarbon dating of faulted units as young as 5 ka cal BP and the palaeo-shorelines of a lake formed during the African Humid Period in the Nakuru Basin indicate that volcanism and fault activity inside and in the vicinity of Menengai must have been sustained during the Holocene. Our analysis confirms that the caldera is located at the centre of an extending rift segment and suggests that other magmatic centres and young zones of faulting along the volcano-tectonic axis of the Kenya Rift may constitute nucleation points of faulting that ultimately foster future continental break-up.},
  language  = {en}
}
@article{SchmidtHesseAttingeretal.2020,
  author    = {Schmidt, Lennart and Hesse, Falk and Attinger, Sabine and Kumar, Rohini},
  title     = {Challenges in applying machine learning models for hydrological inference},
  series = {Water resources research},
  volume    = {56},
  journal   = {Water resources research},
  number    = {5},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0043-1397},
  doi       = {10.1029/2019WR025924},
  pages     = {10},
  year      = {2020},
  abstract  = {Machine learning (ML) algorithms are being increasingly used in Earth and Environmental modeling studies owing to the ever-increasing availability of diverse data sets and computational resources as well as advancement in ML algorithms. Despite advances in their predictive accuracy, the usefulness of ML algorithms for inference remains elusive. In this study, we employ two popular ML algorithms, artificial neural networks and random forest, to analyze a large data set of flood events across Germany with the goals to analyze their predictive accuracy and their usability to provide insights to hydrologic system functioning. The results of the ML algorithms are contrasted against a parametric approach based on multiple linear regression. For analysis, we employ a model-agnostic framework named Permuted Feature Importance to derive the influence of models' predictors. This allows us to compare the results of different algorithms for the first time in the context of hydrology. Our main findings are that (1) the ML models achieve higher prediction accuracy than linear regression, (2) the results reflect basic hydrological principles, but (3) further inference is hindered by the heterogeneity of results across algorithms. Thus, we conclude that the problem of equifinality as known from classical hydrological modeling also exists for ML and severely hampers its potential for inference. To account for the observed problems, we propose that when employing ML for inference, this should be made by using multiple algorithms and multiple methods, of which the latter should be embedded in a cross-validation routine.},
  language  = {en}
}
@article{OttoKempka2020,
  author    = {Otto, Christopher and Kempka, Thomas},
  title     = {Synthesis gas composition prediction for underground coal gasification using a thermochemical equilibrium modeling approach},
  series = {Energies},
  volume    = {13},
  journal   = {Energies},
  number    = {5},
  publisher = {MDPI},
  address   = {Basel},
  issn      = {1996-1073},
  doi       = {10.3390/en13051171},
  pages     = {17},
  year      = {2020},
  abstract  = {Underground coal gasification (UCG) is an in situ conversion technique that enables the production of high-calorific synthesis gas from resources that are economically not minable by conventional methods. A broad range of end-use options is available for the synthesis gas, including fuels and chemical feedstock production. Furthermore, UCG also offers a high potential for integration with Carbon Capture and Storage (CCS) to mitigate greenhouse gas emissions. In the present study, a stoichiometric equilibrium model, based on minimization of the Gibbs function has been used to estimate the equilibrium composition of the synthesis gas. Thereto, we further developed and applied a proven thermodynamic equilibrium model to simulate the relevant thermochemical coal conversion processes (pyrolysis and gasification). Our modeling approach has been validated against thermodynamic models, laboratory gasification experiments and UCG field trial data reported in the literature. The synthesis gas compositions have been found to be in good agreement under a wide range of different operating conditions. Consequently, the presented modeling approach enables an efficient quantification of synthesis gas quality resulting from UCG, considering varying coal and oxidizer compositions at deposit-specific pressures and temperatures.},
  language  = {en}
}
@article{AllroggenBeiterTronicke2020,
  author    = {Allroggen, Niklas and Beiter, Daniel and Tronicke, Jens},
  title     = {Ground-penetrating radar monitoring of fast subsurface processes},
  series = {Geophysics},
  volume    = {85},
  journal   = {Geophysics},
  number    = {3},
  publisher = {Society of Exploration Geophysicists},
  address   = {Tulsa},
  issn      = {0016-8033},
  doi       = {10.1190/GEO2019-0737.1},
  pages     = {A19 -- A23},
  year      = {2020},
  abstract  = {Earth and environmental sciences rely on detailed information about subsurface processes. Whereas geophysical techniques typically provide highly resolved spatial images, monitoring subsurface processes is often associated with enormous effort and, therefore, is usually limited to point information in time or space. Thus, the development of spatial and temporal continuous field monitoring methods is a major challenge for the understanding of subsurface processes. We have developed a novel method for ground-penetrating-radar (GPR) reflection monitoring of subsurface flow processes under unsaturated conditions and applied it to a hydrological infiltration experiment performed across a periglacial slope deposit in northwest Luxembourg. Our approach relies on a spatial and temporal quasicontinuous data recording and processing, followed by an attribute analysis based on analyzing differences between individual time steps. The results demonstrate the ability of time-lapse GPR monitoring to visualize the spatial and temporal dynamics of preferential flow processes with a spatial resolution in the order of a few decimeters and temporal resolution in the order of a few minutes. We observe excellent agreement with water table information originating from different boreholes. This demonstrates the potential of surface-based GPR reflection monitoring to observe the spatiotemporal dynamics of water movements in the subsurface. It provides valuable, and so far not accessible, information for example in the field of hydrology and pedology that allows studying the actual subsurface processes rather than deducing them from point information.},
  language  = {en}
}
@article{RichterHainzlDahmetal.2020,
  author    = {Richter, Gudrun and Hainzl, Sebastian and Dahm, Torsten and Z{\"o}ller, Gert},
  title     = {Stress-based, statistical modeling of the induced seismicity at the Groningen gas field},
  series = {Environmental earth sciences},
  volume    = {79},
  journal   = {Environmental earth sciences},
  number    = {11},
  publisher = {Springer},
  address   = {New York},
  issn      = {1866-6280},
  doi       = {10.1007/s12665-020-08941-4},
  pages     = {15},
  year      = {2020},
  abstract  = {Groningen is the largest onshore gas field under production in Europe. The pressure depletion of the gas field started in 1963. In 1991, the first induced micro-earthquakes have been located at reservoir level with increasing rates in the following decades. Most of these events are of magnitude less than 2.0 and cannot be felt. However, maximum observed magnitudes continuously increased over the years until the largest, significant event with ML=3.6 was recorded in 2014, which finally led to the decision to reduce the production. This causal sequence displays the crucial role of understanding and modeling the relation between production and induced seismicity for economic planing and hazard assessment. Here we test whether the induced seismicity related to gas exploration can be modeled by the statistical response of fault networks with rate-and-state-dependent frictional behavior. We use the long and complete local seismic catalog and additionally detailed information on production-induced changes at the reservoir level to test different seismicity models. Both the changes of the fluid pressure and of the reservoir compaction are tested as input to approximate the Coulomb stress changes. We find that the rate-and-state model with a constant tectonic background seismicity rate can reproduce the observed long delay of the seismicity onset. In contrast, so-called Coulomb failure models with instantaneous earthquake nucleation need to assume that all faults are initially far from a critical state of stress to explain the delay. Our rate-and-state model based on the fluid pore pressure fits the spatiotemporal pattern of the seismicity best, where the fit further improves by taking the fault density and orientation into account. Despite its simplicity with only three free parameters, the rate-and-state model can reproduce the main statistical features of the observed activity.},
  language  = {en}
}
@article{ReinHannemannThomasetal.2020,
  author    = {Rein, Theresa and Hannemann, Katrin and Thomas, Christine and Korn, Michael},
  title     = {Location and characteristics of the X-discontinuity beneath SW Morocco and the adjacent shelf area using P-wave receiver functions},
  series = {Geophysical journal international},
  volume    = {223},
  journal   = {Geophysical journal international},
  number    = {3},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggaa379},
  pages     = {1780 -- 1793},
  year      = {2020},
  abstract  = {Receiver function approaches have proven to be valuable for the investigation of crustal and upper mantle discontinuities whose sharp changes in seismic velocities cause wave conversions. While the crustal and mantle transition zone discontinuities are largely understood, the X-discontinuity at 250-350 km depth is still an object of controversial debate. The origin and global distribution of this structure with a velocity jump of 1.5-4.8\% for compressional and shear waves is still unexplained. Although the crustal and mantle transition zone discontinuities beneath SW Morocco and surroundings have been investigated, only a few studies observed the X-discontinuity and place the depth at 260-370 km beneath the region of western Morocco. In order to better locate and characterize the X-discontinuity beneath southwest Morocco, we create P-wave receiver functions using data recorded by the Morocco-Munster array and detect the X-discontinuity at apparent depths of 285-350 km. In the western part of our study region we find apparent depths of similar to 310-340 km. The eastern part of the study area appears more complex: we locate two velocity jumps at apparent depths of around 285-295 km and 330-350 km in the northeast, and in the southeast we find a discontinuity at apparent depths of 340-350 km. Due to the large depth range and the twofold appearance of the X-discontinuity, we suggest that two different phase transitions cause the X-discontinuity beneath SW Morocco. The velocity contrasts at larger depths likely point to the coesite-stishovite phase transition occurring in deep eclogitic pools. The shallower depths can be explained by the transition from orthoenstatite to high-pressure clinoenstatite which requires the reaction between eclogite and peridotite to form orthopyroxene-rich peridotite. This reaction is likely related to previously proposed small-scale mantle upwellings beneath SW Morocco. Since both phase transitions require eclogite occurrence, the location of the X-discontinuity in this region can be used to indicate the location of recycled oceanic crust.},
  language  = {en}
}
@article{SakiMiriOberhaensli2020,
  author    = {Saki, Adel and Miri, Mirmohammad and Oberh{\"a}nsli, Roland},
  title     = {High temperature - low pressure metamorphism during subduction of Neo-Tethys beneath the Iranian plate},
  series = {Mineralogy and petrology},
  volume    = {114},
  journal   = {Mineralogy and petrology},
  number    = {6},
  publisher = {Springer},
  address   = {Wien [u.a.]},
  issn      = {0930-0708},
  doi       = {10.1007/s00710-020-00721-z},
  pages     = {539 -- 557},
  year      = {2020},
  abstract  = {Subduction of Neo-Tethys oceanic lithosphere beneath the Iranian plate during the Mesozoic formed several igneous bodies of ultramafic to intermediate and felsic composition. Intrusion of these magmas into a regional metamorphic sequence (the Sanandaj-Sirjan Zone) caused partial melting and formation of migmatites with meta-pelitic protoliths. The Alvand complex (west Iran) is a unique area comprising migmatites of both mafic and pelitic protoliths. In this area, the gabbroic rocks contain veins of leucosome at their contact with pyroxenite and olivine gabbro. These leucosomes are geochemically and mineralogically different from leucosomes of the meta-pelitic migmatites and clearly show properties of I-type granites. Microscopic observations and whole rock compositions of the mafic migmatite leucosomes show that migmatization occurred through partial melting of biotite, hornblende and plagioclase. Thermobarometric calculations indicate 800 degrees C and 3.7 kbar for partial melting, although phase diagram modeling demonstrates that the presence of water could decrease the solidus temperature by about 40 degrees C. Our results suggest an asthenospheric magma upwelling as the source of heat for partial melting of the gabbroic rock during subduction of Neo-Tethys oceanic crust under the western edge of the Iranian plate. The present study also reveals relationships between migmatization and formation of S- and I -type granites in the area.},
  language  = {en}
}
@article{WeissWaltersMorishitaetal.2020,
  author    = {Weiss, Jonathan R. and Walters, Richard J. and Morishita, Yu and Wright, Tim J. and Lazecky, Milan and Wang, Hua and Hussain, Ekbal and Hooper, Andrew J. and Elliott, John R. and Rollins, Chris and Yu, Chen and Gonzalez, Pablo J. and Spaans, Karsten and Li, Zhenhong and Parsons, Barry},
  title     = {High-resolution surface velocities and strain for Anatolia from Sentinel-1 InSAR and GNSS data},
  series = {Geophysical research letters},
  volume    = {47},
  journal   = {Geophysical research letters},
  number    = {17},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0094-8276},
  doi       = {10.1029/2020GL087376},
  pages     = {12},
  year      = {2020},
  abstract  = {Measurements of present-day surface deformation are essential for the assessment of long-term seismic hazard. The European Space Agency's Sentinel-1 satellites enable global, high-resolution observation of crustal motion from Interferometric Synthetic Aperture Radar (InSAR). We have developed automated InSAR processing systems that exploit the first similar to 5 years of Sentinel-1 data to measure surface motions for the similar to 800,000-km(2) Anatolian region. Our new 3-D velocity and strain rate fields illuminate deformation patterns dominated by westward motion of Anatolia relative to Eurasia, localized strain accumulation along the North and East Anatolian Faults, and rapid vertical signals associated with anthropogenic activities and to a lesser extent extension across the grabens of western Anatolia. We show that automatically processed Sentinel-1 InSAR data can characterize details of the velocity and strain rate fields with high resolution and accuracy over large regions. These results are important for assessing the relationship between strain accumulation and release in earthquakes. <br /> Plain Language Summary Satellite-based measurements of small rates of motion of the Earth's surface made at high spatial resolutions and over large areas are important for many geophysical applications including improving earthquake hazard models. We take advantage of recent advances in geodetic techniques in order to measure surface velocities and tectonic strain accumulation across the Anatolia region, including the highly seismogenic and often deadly North Anatolian Fault. We show that by combining Sentinel-1 Interferometric Synthetic Aperture Radar (InSAR) data with Global Navigation Satellite System (GNSS) measurements we can enhance our view of surface deformation associated with active tectonics, the earthquake cycle, and anthropogenic processes.},
  language  = {en}
}
@article{BaroniFrancke2020,
  author    = {Baroni, Gabriele and Francke, Till},
  title     = {An effective strategy for combining variance- and distribution-based global sensitivity analysis},
  series = {Environmental modelling \& software with environment data news},
  volume    = {134},
  journal   = {Environmental modelling \& software with environment data news},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {1364-8152},
  doi       = {10.1016/j.envsoft.2020.104851},
  pages     = {14},
  year      = {2020},
  abstract  = {We present a new strategy for performing global sensitivity analysis capable to estimate main and interaction effects from a generic sampling design. The new strategy is based on a meaningful combination of varianceand distribution-based approaches. The strategy is tested on four analytic functions and on a hydrological model. Results show that the analysis is consistent with the state-of-the-art Saltelli/Jansen formula but to better quantify the interaction effect between the input factors when the output distribution is skewed. Moreover, the estimation of the sensitivity indices is much more robust requiring a smaller number of simulations runs. Specific settings and alternative methods that can be integrated in the new strategy are also discussed. Overall, the strategy is considered as a new simple and effective tool for performing global sensitivity analysis that can be easily integrated in any environmental modelling framework.},
  language  = {en}
}
@article{ZiemannMadariaga2020,
  author    = {Ziemann, Martin Andreas and Madariaga, Juan Manuel},
  title     = {Applications of Raman spectroscopy in art and archaeology},
  series = {Journal of Raman spectroscopy},
  volume    = {52},
  journal   = {Journal of Raman spectroscopy},
  number    = {1},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0377-0486},
  doi       = {10.1002/jrs.6054},
  pages     = {8 -- 14},
  year      = {2020},
  abstract  = {The 10th edition of the International Congress on the Application of Raman Spectroscopy in Art and Archaeology (RAA2019) was held in Potsdam (Germany) from 3 to 7 September 2019, with eight keynote lectures, 35 oral presentations and 18 Poster Presentations. The number of active participants was 68 delegates from 20 countries among the 236 authors that presented at least one work.},
  language  = {en}
}
@article{MorgensternOverduinGuentheretal.2020,
  author    = {Morgenstern, Anne and Overduin, Pier Paul and G{\"u}nther, Frank and Stettner, Samuel and Ramage, Justine and Schirrmeister, Lutz and Grigoriev, Mikhail N. and Grosse, Guido},
  title     = {Thermo-erosional valleys in Siberian ice-rich permafrost},
  series = {Permafrost and Periglacial Processes},
  volume    = {32},
  journal   = {Permafrost and Periglacial Processes},
  number    = {1},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {1045-6740},
  doi       = {10.1002/ppp.2087},
  pages     = {59 -- 75},
  year      = {2020},
  abstract  = {Thermal erosion is a major mechanism of permafrost degradation, resulting in characteristic landforms. We inventory thermo-erosional valleys in ice-rich coastal lowlands adjacent to the Siberian Laptev Sea based on remote sensing, Geographic Information System (GIS), and field investigations for a first regional assessment of their spatial distribution and characteristics. Three study areas with similar geological (Yedoma Ice Complex) but diverse geomorphological conditions vary in valley areal extent, incision depth, and branching geometry. The most extensive valley networks are incised deeply (up to 35 m) into the broad inclined lowland around Mamontov Klyk. The flat, low-lying plain forming the Buor Khaya Peninsula is more degraded by thermokarst and characterized by long valleys of lower depth with short tributaries. Small, isolated Yedoma Ice Complex remnants in the Lena River Delta predominantly exhibit shorter but deep valleys. Based on these hydrographical network and topography assessments, we discuss geomorphological and hydrological connections to erosion processes. Relative catchment size along with regional slope interact with other Holocene relief-forming processes such as thermokarst and neotectonics. Our findings suggest that thermo-erosional valleys are prominent, hitherto overlooked permafrost degradation landforms that add to impacts on biogeochemical cycling, sediment transport, and hydrology in the degrading Siberian Yedoma Ice Complex.},
  language  = {en}
}
@article{Oberhaensli2020,
  author    = {Oberh{\"a}nsli, Roland},
  title     = {Deep-time Digital Earth (DDE) the first IUGS big science program},
  series = {Journal of the Geological Society of India},
  volume    = {95},
  journal   = {Journal of the Geological Society of India},
  number    = {3},
  publisher = {Springer India},
  address   = {New Delhi},
  issn      = {0016-7622},
  doi       = {10.1007/s12594-020-1420-5},
  pages     = {223 -- 226},
  year      = {2020},
  language  = {en}
}
@article{SteinbergSudhausHeimannetal.2020,
  author    = {Steinberg, Andreas and Sudhaus, Henriette and Heimann, Sebastian and Kr{\"u}ger, Frank},
  title     = {Sensitivity of InSAR and teleseismic observations to earthquake rupture segmentation},
  series = {Geophysical journal international},
  volume    = {223},
  journal   = {Geophysical journal international},
  number    = {2},
  publisher = {Oxford Univ. Press},
  address   = {Oxford},
  issn      = {0956-540X},
  doi       = {10.1093/gji/ggaa351},
  pages     = {875 -- 907},
  year      = {2020},
  abstract  = {Earthquakes often rupture across more than one fault segment. If such rupture segmentation occurs on a significant scale, a simple point-source or one-fault model may not represent the rupture process well. As a consequence earthquake characteristics inferred, based on one-source assumptions, may become systematically wrong. This might have effects on follow-up analyses, for example regional stress field inversions and seismic hazard assessments. While rupture segmentation is evident for most M-w > 7 earthquakes, also smaller ones with 5.5 < M-w < 7 can be segmented. We investigate the sensitivity of globally available data sets to rupture segmentation and their resolution to reliably estimate the mechanisms in presence of segmentation. We focus on the sensitivity of InSAR (Interferometric Synthetic Aperture Radar) data in the static near-field and seismic waveforms in the far-field of the rupture and carry out non-linear and Bayesian optimizations of single-source and two-sources kinematic models (double-couple point sources and finite, rectangular sources) using InSAR and teleseismic waveforms separately. Our case studies comprises of four M-w 6-7 earthquakes: the 2009 L'Aquila and 2016 Amatrice (Italy) and the 2005 and 2008 Zhongba (Tibet) earthquakes. We contrast the data misfits of different source complexity by using the Akaike informational criterion (AIC). We find that the AIC method is well suited for data-driven inferences on significant rupture segmentation for the given data sets. This is based on our observation that an AIC-stated significant improvement of data fit for two-segment models over one-segment models correlates with significantly different mechanisms of the two source segments and their average compared to the single-segment mechanism. We attribute these modelled differences to a sufficient sensitivity of the data to resolve rupture segmentation. Our results show that near-field data are generally more sensitive to rupture segmentation of shallow earthquakes than far-field data but that also teleseismic data can resolve rupture segmentation in the studied magnitude range. We further conclude that a significant difference in the modelled source mechanisms for different segmentations shows that an appropriate choice of model segmentation matters for a robust estimation of source mechanisms. It reduces systematic biases and trade-off and thereby improves the knowledge on the rupture. Our study presents a strategy and method to detect significant rupture segmentation such that an appropriate model complexity can be used in the source mechanism inference. A similar, systematic investigation of earthquakes in the range of M-w 5.5-7 could provide important hazard-relevant statistics on rupture segmentation. In these cases single-source models introduce a systematic bias. Consideration of rupture segmentation therefore matters for a robust estimation of source mechanisms of the studied earthquakes.},
  language  = {en}
}
@article{PilzCottonRazafindrakotoetal.2020,
  author    = {Pilz, Marco and Cotton, Fabrice and Razafindrakoto, Hoby Njara Tendrisoa and Weatherill, Graeme and Spies, Thomas},
  title     = {Regional broad-band ground-shaking modelling over extended and thick sedimentary basins},
  series = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering},
  volume    = {19},
  journal   = {Bulletin of earthquake engineering : official publication of the European Association for Earthquake Engineering},
  number    = {2},
  publisher = {Springer},
  address   = {Dordrecht},
  issn      = {1570-761X},
  doi       = {10.1007/s10518-020-01004-w},
  pages     = {581 -- 603},
  year      = {2020},
  abstract  = {The simulation of broad-band (0.1 to 10 + Hz) ground-shaking over deep and spatially extended sedimentary basins at regional scales is challenging. We evaluate the ground-shaking of a potential M 6.5 earthquake in the southern Lower Rhine Embayment, one of the most important areas of earthquake recurrence north of the Alps, close to the city of Cologne in Germany. In a first step, information from geological investigations, seismic experiments and boreholes is combined for deriving a harmonized 3D velocity and attenuation model of the sedimentary layers. Three alternative approaches are then applied and compared to evaluate the impact of the sedimentary cover on ground-motion amplification. The first approach builds on existing response spectra ground-motion models whose amplification factors empirically take into account the influence of the sedimentary layers through a standard parameterization. In the second approach, site-specific 1D amplification functions are computed from the 3D basin model. Using a random vibration theory approach, we adjust the empirical response spectra predicted for soft rock conditions by local site amplification factors: amplifications and associated ground-motions are predicted both in the Fourier and in the response spectra domain. In the third approach, hybrid physics-based ground-motion simulations are used to predict time histories for soft rock conditions which are subsequently modified using the 1D site-specific amplification functions computed in method 2. For large distances and at short periods, the differences between the three approaches become less notable due to the significant attenuation of the sedimentary layers. At intermediate and long periods, generic empirical ground-motion models provide lower levels of amplification from sedimentary soils compared to methods taking into account site-specific 1D amplification functions. In the near-source region, hybrid physics-based ground-motions models illustrate the potentially large variability of ground-motion due to finite source effects.},
  language  = {en}
}
@article{BalischewskiBehrensZehbeetal.2020,
  author    = {Balischewski, Christian and Behrens, Karsten and Zehbe, Kerstin and G{\"u}nter, Christina and Mies, Stefan and Sperlich, Eric and Kelling, Alexandra and Taubert, Andreas},
  title     = {Ionic liquids with more than one metal},
  series = {Chemistry - a European journal},
  volume    = {26},
  journal   = {Chemistry - a European journal},
  number    = {72},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0947-6539},
  doi       = {10.1002/chem.202003097},
  pages     = {17504 -- 17513},
  year      = {2020},
  abstract  = {Thirteen N-butylpyridinium salts, including three monometallic [C4Py](2)[MCl4], nine bimetallic [C4Py](2)[(M1-xMxCl4)-M-a-Cl-b] and one trimetallic compound [C4Py](2)[(M1-y-zMyMz (c) Cl4)-M-a-M-b] (M=Co, Cu, Mn; x=0.25, 0.50 or 0.75 and y=z=0.33), were synthesized and their structure and thermal and electrochemical properties were studied. All compounds are ionic liquids (ILs) with melting points between 69 and 93 degrees C. X-ray diffraction proves that all ILs are isostructural. The conductivity at room temperature is between 10(-4) and 10(-8) S cm(-1). Some Cu-based ILs reach conductivities of 10(-2) S cm(-1), which is, however, probably due to IL dec. This correlates with the optical bandgap measurements indicating the formation of large bandgap semiconductors. At elevated temperatures approaching the melting points, the conductivities reach up to 1.47x10(-1) S cm(-1) at 70 degrees C. The electrochemical stability windows of the ILs are between 2.5 and 3.0 V.},
  language  = {en}
}
@article{KloseChaparroSchillingetal.2020,
  author    = {Klose, Tim and Chaparro, M. Carme and Schilling, Frank and Butscher, Christoph and Klumbach, Steffen and Blum, Philipp},
  title     = {Fluid flow simulations of a large-scale borehole leakage experiment},
  series = {Transport in Porous Media},
  volume    = {136},
  journal   = {Transport in Porous Media},
  number    = {1},
  publisher = {Springer},
  address   = {New York},
  issn      = {0169-3913},
  doi       = {10.1007/s11242-020-01504-y},
  pages     = {125 -- 145},
  year      = {2020},
  abstract  = {Borehole leakage is a common and complex issue. Understanding the fluid flow characteristics of a cemented area inside a borehole is crucial to monitor and quantify the wellbore integrity as well as to find solutions to minimise existing leakages. In order to improve our understanding of the flow behaviour of cemented boreholes, we investigated experimental data of a large-scale borehole leakage tests by means of numerical modelling using three different conceptual models. The experiment was performed with an autoclave system consisting of two vessels bridged by a cement-filled casing. After a partial bleed-off at the well-head, a sustained casing pressure was observed due to fluid flow through the cementsteel composite. The aim of our simulations is to investigate and quantify the permeability of the cement-steel composite. From our model results, we conclude that the flow occurred along a preferential flow path at the cement-steel interface. Thus, the inner part of the cement core was impermeable during the duration of the experiment. The preferential flow path can be described as a highly permeable and highly porous area with an aperture of about 5 mu m and a permeability of 3 . 10(-12) m(2) (3 Darcy). It follows that the fluid flow characteristics of a cemented area inside a borehole cannot be described using one permeability value for the entire cement-steel composite. Furthermore, it can be concluded that the quality of the cement and the filling process regarding the cement-steel interface is crucial to minimize possible well leakages.},
  language  = {en}
}
@article{SamprognaMohorHudsonThieken2020,
  author    = {Samprogna Mohor, Guilherme and Hudson, Paul and Thieken, Annegret},
  title     = {A comparison of factors driving flood losses in households affected by different flood types},
  series = {Water resources research},
  volume    = {56},
  journal   = {Water resources research},
  number    = {4},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0043-1397},
  doi       = {10.1029/2019WR025943},
  pages     = {20},
  year      = {2020},
  abstract  = {Flood loss data collection and modeling are not standardized, and previous work has indicated that losses from different flood types (e.g., riverine and groundwater) may follow different driving forces. However, different flood types may occur within a single flood event, which is known as a compound flood event. Therefore, we aimed to identify statistical similarities between loss-driving factors across flood types and test whether the corresponding losses should be modeled separately. In this study, we used empirical data from 4,418 respondents from four survey campaigns studying households in Germany that experienced flooding. These surveys sought to investigate several features of the impact process (hazard, socioeconomic, preparedness, and building characteristics, as well as flood type). While the level of most of these features differed across flood type subsamples (e.g., degree of preparedness), they did so in a nonregular pattern. A variable selection process indicates that besides hazard and building characteristics, information on property-level preparedness was also selected as a relevant predictor of the loss ratio. These variables represent information, which is rarely adopted in loss modeling. Models shall be refined with further data collection and other statistical methods. To save costs, data collection efforts should be steered toward the most relevant predictors to enhance data availability and increase the statistical power of results. Understanding that losses from different flood types are driven by different factors is a crucial step toward targeted data collection and model development and will finally clarify conditions that allow us to transfer loss models in space and time. <br /> Key Points <br /> Survey data of flood-affected households show different concurrent flood types, undermining the use of a single-flood-type loss model Thirteen variables addressing flood hazard, the building, and property level preparedness are significant predictors of the building loss ratio Flood type-specific models show varying significance across the predictor variables, indicating a hindrance to model transferability},
  language  = {en}
}
@article{Leon2020,
  author    = {Le{\´o}n, Ena Mercedes Matienzo},
  title     = {Observaciones sobre el clima de Lima y sus influencias en los seres organizados, en especial el hombre},
  series = {Iberoamericana},
  volume    = {20},
  journal   = {Iberoamericana},
  number    = {74},
  publisher = {Vervuert},
  address   = {Frankfurt, Main},
  issn      = {1577-3388},
  doi       = {10.18441/ibam.20.2020.74.279-394},
  pages     = {305 -- 308},
  year      = {2020},
  abstract  = {Una extraordinaria edici{\´o}n actualizada de Observaciones sobre el clima de Lima y sus influencias en los seres organizados, en especial el hombre de Jos{\´e} Hip{\´o}lito Unanue y Pav{\´o}n ha sido publicado en el 2018 y merece ser anunciado a la comunidad acad{\´e}mica peruana e internacional. Este libro incluye un exhaustivo estudio in troductorio del destacado historiador Lizardo Seiner Liz{\´a}rraga. Esta introducci{\´o}n est{\´a} conformada de tres partes encabezadas por los siguientes t{\´i}tulos: a) Unanue: una historiograf{\´i}a de amplio espectro b) Textos, registros y referencias: una indagaci{\´o}n en la biblioteca de Unanue y c) Observaciones sobre el clima de Lima: una obra en dos tiempos.},
  language  = {es}
}
@article{WangKwiatekRybackietal.2020,
  author    = {Wang, Lei and Kwiatek, Grzegorz and Rybacki, Erik and Bohnhoff, Marco and Dresen, Georg},
  title     = {Injection-induced seismic moment release and laboratory fault slip},
  series = {Geophysical research letters},
  volume    = {47},
  journal   = {Geophysical research letters},
  number    = {22},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0094-8276},
  doi       = {10.1029/2020GL089576},
  pages     = {11},
  year      = {2020},
  abstract  = {Understanding the relation between injection-induced seismic moment release and operational parameters is crucial for early identification of possible seismic hazards associated with fluid-injection projects. We conducted laboratory fluid-injection experiments on permeable sandstone samples containing a critically stressed fault at different fluid pressurization rates. The observed fluid-induced fault deformation is dominantly aseismic. Fluid-induced stick-slip and fault creep reveal that total seismic moment release of acoustic emission (AE) events is related to total injected volume, independent of respective fault slip behavior. Seismic moment release rate of AE scales with measured fault slip velocity. For injection-induced fault slip in a homogeneous pressurized region, released moment shows a linear scaling with injected volume for stable slip (steady slip and fault creep), while we find a cubic relation for dynamic slip. Our results highlight that monitoring evolution of seismic moment release with injected volume in some cases may assist in discriminating between stable slip and unstable runaway ruptures.},
  language  = {en}
}
@article{MtilatilaBronstertBuergeretal.2020,
  author    = {Mtilatila, Lucy Mphatso Ng'ombe and Bronstert, Axel and B{\"u}rger, Gerd and Vormoor, Klaus Josef},
  title     = {Meteorological and hydrological drought assessment in Lake Malawi and Shire River basins (1970-2013)},
  series = {Hydrological sciences journal = Journal des sciences hydrologiques},
  volume    = {65},
  journal   = {Hydrological sciences journal = Journal des sciences hydrologiques},
  number    = {16},
  publisher = {Routledge, Taylor \& Francis Group},
  address   = {Abingdon},
  issn      = {0262-6667},
  doi       = {10.1080/02626667.2020.1837384},
  pages     = {2750 -- 2764},
  year      = {2020},
  abstract  = {The study assesses the variability and trends of both meteorological and hydrological droughts from 1970 to 2013 in Lake Malawi and Shire River basins using the standardized precipitation index (SPI) and standardized precipitation and evaporation index (SPEI) for meteorological droughts and the lake level change index (LLCI) for hydrological droughts. Trends and slopes in droughts and drought drivers are estimated using Mann-Kendall test and Sen's slope, respectively. Results suggest that meteorological droughts are increasing due to a decrease in precipitation which is exacerbated by an increase in temperature (potential evapotranspiration). The hydrological system of Lake Malawi seems to have a >24-month memory towards meteorological conditions, since the 36-month SPEI can predict hydrological droughts 10 months in advance. The study has found the critical lake level that would trigger hydrological drought to be 474.1 m a.s.l. The increase in drought is a concern as this will have serious impacts on water resources and hydropower supply in Malawi.},
  language  = {en}
}
@article{Streck2020,
  author    = {Streck, Charlotte},
  title     = {Filling in for Governments?},
  series = {Journal for European Environmental \& Planning Law},
  volume    = {17},
  journal   = {Journal for European Environmental \& Planning Law},
  number    = {1},
  publisher = {Martinus Nijhoff Pub},
  address   = {Leiden},
  issn      = {1613-7272},
  doi       = {10.1163/18760104-01701003},
  pages     = {5 -- 28},
  year      = {2020},
  abstract  = {The 2015 Paris Agreement on climate change abandons the Kyoto Protocol's paradigm of binding emissions targets and relies instead on countries' voluntary contributions. However, the Paris Agreement encourages not only governments but also sub-national governments, corporations and civil society to contribute to reaching ambitious climate goals. In a transition from the regulated architecture of the Kyoto Protocol to the open system of the Paris Agreement, the Agreement seeks to integrate non-state actors into the treaty-based climate regime. In 2014 the secretariat of the United Nations Framework Convention on Climate Change Peru and France created the Non-State Actor Zone for Climate Action (and launched the Global Climate Action portal). In December 2019, this portal recorded more than twenty thousand climate-commitments of private and public non-state entities, making the non-state venues of international climate meetings decisively more exciting than the formal negotiation space. This level engagement and governments' response to it raises a flurry of questions in relation to the evolving nature of the climate regime and climate change governance, including the role of private actors as standard setters and the lack of accountability mechanisms for non-state actions. This paper takes these developments as occasion to discuss the changing role of private actors in the climate regime.},
  language  = {en}
}
@article{KoyanTronicke2020,
  author    = {Koyan, Philipp and Tronicke, Jens},
  title     = {3D modeling of ground-penetrating radar data across a realistic sedimentary model},
  series = {Computers \& geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology},
  volume    = {137},
  journal   = {Computers \& geosciences : an international journal devoted to the publication of papers on all aspects of geocomputation and to the distribution of computer programs and test data sets ; an official journal of the International Association for Mathematical Geology},
  publisher = {Elsevier},
  address   = {Amsterdam},
  issn      = {0098-3004},
  doi       = {10.1016/j.cageo.2020.104422},
  pages     = {9},
  year      = {2020},
  abstract  = {Ground-penetrating radar (GPR) is an established geophysical tool to explore a wide range of near-surface environments. Today, the use of synthetic GPR data is largely limited to 2D because 3D modeling is computationally more expensive. In fact, only recent developments of modeling tools and powerful hardware allow for a time-efficient computation of extensive 3D data sets. Thus, 3D subsurface models and resulting GPR data sets, which are of great interest to develop and evaluate novel approaches in data analysis and interpretation, have not been made publicly available up to now. <br /> We use a published hydrofacies data set of an aquifer-analog study within fluvio-glacial deposits to infer a realistic 3D porosity model showing heterogeneities at multiple spatial scales. Assuming fresh-water saturated sediments, we generate synthetic 3D GPR data across this model using novel GPU-acceleration included in the open-source software gprMax. We present a numerical approach to examine 3D wave-propagation effects in modeled GPR data. Using the results of this examination study, we conduct a spatial model decomposition to enable a computationally efficient 3D simulation of a typical GPR reflection data set across the entire model surface. We process the resulting GPR data set using a standard 3D structural imaging sequence and compare the results to selected input data to demonstrate the feasibility and potential of the presented modeling studies. We conclude on conceivable applications of our 3D GPR reflection data set and the underlying porosity model, which are both publicly available and, thus, can support future methodological developments in GPR and other near-surface geophysical techniques.},
  language  = {en}
}
@article{Hudson2020,
  author    = {Hudson, Paul},
  title     = {The affordability of flood risk property-level adaptation measures},
  series = {Risk Analysis},
  volume    = {40},
  journal   = {Risk Analysis},
  number    = {6},
  publisher = {Wiley},
  address   = {Hoboken},
  issn      = {0272-4332},
  doi       = {10.1111/risa.13465},
  pages     = {1151 -- 1167},
  year      = {2020},
  abstract  = {The affordability of property-level adaptation measures against flooding is crucial due to the movement toward integrated flood risk management, which requires the individuals threatened by flooding to actively manage flooding. It is surprising to find that affordability is not often discussed, given the important roles that affordability and social justice play regarding flood risk management. This article provides a starting point for investigating the potential rate of unaffordability of flood risk property-level adaptation measures across Europe using two definitions of affordability, which are combined with two different affordability thresholds from within flood risk research. It uses concepts of investment and payment affordability, with affordability thresholds based on residual income and expenditure definitions of unaffordability. These concepts, in turn, are linked with social justice through fairness concerns, in that, all should have equal capability to act, of which affordability is one avenue. In doing so, it was found that, for a large proportion of Europe, property owners generally cannot afford to make one-time payment of the cost of protective measures. These can be made affordable with installment payment mechanisms or similar mechanisms that spread costs over time. Therefore, the movement toward greater obligations for flood-prone residents to actively adapt to flooding should be accompanied by socially accessible financing mechanisms.},
  language  = {en}
}
@article{CrisologoHeistermann2020,
  author    = {Crisologo, Irene and Heistermann, Maik},
  title     = {Using ground radar overlaps to verify the retrieval of calibration bias estimates from spaceborne platforms},
  series = {Atmospheric measurement techniques : an interactive open access journal of the European Geosciences Union},
  volume    = {13},
  journal   = {Atmospheric measurement techniques : an interactive open access journal of the European Geosciences Union},
  number    = {2},
  publisher = {Copernicus},
  address   = {G{\"o}ttingen},
  issn      = {1867-1381},
  doi       = {10.5194/amt-13-645-2020},
  pages     = {645 -- 659},
  year      = {2020},
  abstract  = {Many institutions struggle to tap into the potential of their large archives of radar reflectivity: these data are often affected by miscalibration, yet the bias is typically unknown and temporally volatile. Still, relative calibration techniques can be used to correct the measurements a posteriori. For that purpose, the usage of spaceborne reflectivity observations from the Tropical Rainfall Measuring Mission (TRMM) and Global Precipitation Measurement (GPM) platforms has become increasingly popular: the calibration bias of a ground radar (GR) is estimated from its average reflectivity difference to the spaceborne radar (SR). Recently, Crisologo et al. (2018) introduced a formal procedure to enhance the reliability of such estimates: each match between SR and GR observations is assigned a quality index, and the calibration bias is inferred as a quality-weighted average of the differences between SR and GR. The relevance of quality was exemplified for the Subic S-band radar in the Philippines, which is greatly affected by partial beam blockage. The present study extends the concept of quality-weighted averaging by accounting for path-integrated attenuation (PIA) in addition to beam blockage. This extension becomes vital for radars that operate at the C or X band. Correspondingly, the study setup includes a C-band radar that substantially overlaps with the S-band radar. Based on the extended quality-weighting approach, we retrieve, for each of the two ground radars, a time series of calibration bias estimates from suitable SR overpasses. As a result of applying these estimates to correct the ground radar observations, the consistency between the ground radars in the region of overlap increased substantially. Furthermore, we investigated if the bias estimates can be interpolated in time, so that ground radar observations can be corrected even in the absence of prompt SR overpasses. We found that a moving average approach was most suitable for that purpose, although limited by the absence of explicit records of radar maintenance operations.},
  language  = {en}
}
@article{BrunelloAndermannMarcetal.2020,
  author    = {Brunello, Camilla Francesca and Andermann, Christoff and Marc, Odin and Schneider, Katharina A. and Comiti, Francesco and Achleitner, Stefan and Hovius, Niels},
  title     = {Annually resolved monsoon onset and withdrawal dates across the Himalayas derived from local precipitation statistics},
  series = {Geophysical research letters},
  volume    = {47},
  journal   = {Geophysical research letters},
  number    = {23},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {0094-8276},
  doi       = {10.1029/2020GL088420},
  pages     = {12},
  year      = {2020},
  abstract  = {A local and flexible definition of the monsoon season based on hydrological evidence is important for the understanding and management of Himalayan water resources. Here, we present an objective statistical method to retrieve seasonal hydrometeorological transitions. Applied to daily rainfall data (1951-2015), this method shows an average longitudinal delay of similar to 15 days, with later monsoon onset and earlier withdrawal in the western Himalaya, consistent with the continental progression of wet air masses. This delay leads to seasons of different length along the Himalaya and biased precipitation amounts when using uniform calendric monsoon boundaries. In the Central Himalaya annual precipitation has increased, due primarily to an increase of premonsoon precipitation. These findings highlight issues associated with a static definition of monsoon boundaries and call for a deeper understanding of nonmonsoonal precipitation over the Himalayan water tower. <br /> Plain Language Summary Precipitation in the Himalayas determines water availability for the Indian foreland with large socioeconomic implications. Despite its importance, spatial and temporal patterns of precipitation are poorly understood. Here, we estimate the long-term average and trends of seasonal precipitation at the scale of individual catchments draining the Himalayas. We apply a statistical method to detect the timing of hydrometeorological seasons from local precipitation measurements, focusing on monsoon onset and withdrawal. We identify longitudinal and latitudinal delays, resulting in seasons of different length along and across the Himalayas. These spatial patterns and the annual variability of the monsoon boundaries mean that oft-used, fixed calendric dates, for example, 1 June to 30 September, may be inadequate for retrieving monsoon rainfall totals. Moreover, we find that, despite its prominent contribution to annual rainfall totals, the Indian summer monsoon cannot explain the increase of the annual precipitation over the Central Himalayas. Instead, this appears to be mostly driven by changes in premonsoon and winter rainfall. So far, little attention has been paid to premonsoon precipitation, but governed by evaporative processes and surface water availability, it may be enhanced by irrigation and changed land use in the Gangetic foreland.},
  language  = {en}
}
@article{OlenBookhagen2020,
  author    = {Olen, Stephanie M. and Bookhagen, Bodo},
  title     = {Applications of SAR interferometric coherence time series},
  series = {Journal of geophysical research : Earth surface},
  volume    = {125},
  journal   = {Journal of geophysical research : Earth surface},
  number    = {3},
  publisher = {American Geophysical Union},
  address   = {Washington},
  issn      = {2169-9003},
  doi       = {10.1029/2019JF005141},
  pages     = {22},
  year      = {2020},
  abstract  = {Sediment transport domains in mountain landscapes are characterized by fundamentally different processes and rates depending on several factors, including geology, climate, and biota. Accurately identifying where transitions between transport domains occur is an important step to quantify the past, present, and future contribution of varying erosion and sedimentation processes and enhance our predictive capabilities. We propose a new methodology based on time series of synthetic aperture radar (SAR) interferometric coherence images to map sediment transport regimes across arid and semiarid landscapes. Using 4 years of Sentinel-1 data, we analyze sediment transport regimes for the south-central Andes in northwestern Argentina characterized by steep topographic and climatic gradients. We observe seasonally low coherence during the regional wet season, particularly on hillslopes and in alluvial channels. The spatial distribution of coherence is compared to drainage areas extracted from digital topography to identify two distinct transitions within watersheds: (a) a hillslope-to-fluvial and (b) a fluvial-to-alluvial transition. While transitions within a given basin can be well-constrained, the relative role of each sediment transport domain varies widely over the climatic and topographic gradients. In semiarid regions, we observe larger relative contributions from hillslopes compared to arid regions. Across regional gradients, the range of coherence within basins positively correlates to previously published millennial catchment-wide erosion rates and to topographic metrics used to indicate long-term uplift. Our study suggests that a dense time series of interferometric coherence can be used as a proxy for surface sediment movement and landscape stability in vegetation-free settings at event to decadal timescales.},
  language  = {en}
}
@article{GovinvanderBeekNajmanetal.2020,
  author    = {Govin, Gwladys and van der Beek, Pieter A. and Najman, Yani and Millar, Ian and Gemignani, Lorenzo and Huyghe, Pascale and Dupont-Nivet, Guillaume and Bernet, Matthias and Mark, Chris and Wijbrans, Jan},
  title     = {Early onset and late acceleration of rapid exhumation in the Namche Barwa syntaxis, eastern Himalaya},
  series = {Geology},
  volume    = {48},
  journal   = {Geology},
  number    = {12},
  publisher = {American Institute of Physics},
  address   = {Boulder},
  issn      = {0091-7613},
  doi       = {10.1130/G47720.1},
  pages     = {1139 -- 1143},
  year      = {2020},
  abstract  = {The Himalayan syntaxes, characterized by extreme rates of rock exhumation co-located with major trans-orogenic rivers, figure prominently in the debate on tectonic versus erosional forcing of exhumation. Both the mechanism and timing of rapid exhumation of the Namche Barwa massif in the eastern syntaxis remain controversial. It has been argued that coupling between crustal rock advection and surface erosion initiated in the late Miocene (8-10 Ma). Recent studies, in contrast, suggest a Quaternary onset of rapid exhumation linked to a purely tectonic mechanism. We report new multisystem detrital thermochronology data from the most proximal Neogene clastic sediments downstream of Namche Barwa and use a thermo-kinematic model constrained by new and published data to explore its exhumation history. Modeling results show that exhumation accelerated to similar to 4 km/m.y. at ca. 8 Ma and to similar to 9 km/m.y. after ca. 2 Ma. This three-stage history reconciles apparently contradictory evidence for early and late onset of rapid exhumation and suggests efficient coupling between tectonics and erosion since the late Miocene. Quaternary acceleration of exhumation is consistent with river-profile evolution and may be linked to a Quaternary river-capture event.},
  language  = {en}
}
@article{PaprotnyKreibichMoralesNapolesetal.2020,
  author    = {Paprotny, Dominik and Kreibich, Heidi and Morales-Napoles, Oswaldo and Wagenaar, Dennis and Castellarin, Attilio and Carisi, Francesca and Bertin, Xavier and Merz, Bruno and Schr{\"o}ter, Kai},
  title     = {A probabilistic approach to estimating residential losses from different flood types},
  series = {Natural hazards : journal of the International Society for the Prevention and Mitigation of Natural Hazards},
  volume    = {105},
  journal   = {Natural hazards : journal of the International Society for the Prevention and Mitigation of Natural Hazards},
  number    = {3},
  publisher = {Springer},
  address   = {New York},
  issn      = {0921-030X},
  doi       = {10.1007/s11069-020-04413-x},
  pages     = {2569 -- 2601},
  year      = {2020},
  abstract  = {Residential assets, comprising buildings and household contents, are a major source of direct flood losses. Existing damage models are mostly deterministic and limited to particular countries or flood types. Here, we compile building-level losses from Germany, Italy and the Netherlands covering a wide range of fluvial and pluvial flood events. Utilizing a Bayesian network (BN) for continuous variables, we find that relative losses (i.e. loss relative to exposure) to building structure and its contents could be estimated with five variables: water depth, flow velocity, event return period, building usable floor space area and regional disposable income per capita. The model's ability to predict flood losses is validated for the 11 flood events contained in the sample. Predictions for the German and Italian fluvial floods were better than for pluvial floods or the 1993 Meuse river flood. Further, a case study of a 2010 coastal flood in France is used to test the BN model's performance for a type of flood not included in the survey dataset. Overall, the BN model achieved better results than any of 10 alternative damage models for reproducing average losses for the 2010 flood. An additional case study of a 2013 fluvial flood has also shown good performance of the model. The study shows that data from many flood events can be combined to derive most important factors driving flood losses across regions and time, and that resulting damage models could be applied in an open data framework.},
  language  = {en}
}