@phdthesis{Graetz2020,
  author    = {Gr{\"a}tz, Fabio M.},
  title     = {Nonlinear diffusion in granular gases and dense planetary rings},
  school      = {Universit{\"a}t Potsdam},
  pages     = {101},
  year      = {2020},
  abstract  = {Small moonlets or moons embedded in dense planetary rings create S-shaped density modulations called propellers if their masses are smaller than a certain threshold, alternatively they create a circumferential gap in the disk if the embedded body's mass exceeds this threshold (Spahn and Sremčević, 2000). The gravitational perturber scatters the ring particles, depletes the disk's density, and, thus, clears a gap, whereas counteracting viscous diffusion of the ring material has the tendency to close the created gap, thereby forming a propeller. Propeller objects were predicted by Spahn and Sremčević (2000) and Sremčević et al. (2002) and were later discovered by the Cassini space probe (Tiscareno et al., 2006, Sremčević et al., 2007, Tiscareno et al., 2008, and Tiscareno et al., 2010). The ring moons Pan and Daphnis are massive enough to maintain the circumferential Encke and Keeler gaps in Saturn's A ring and were detected by Showalter (1991) and Porco (2005) in Voyager and Cassini images, respectively. In this thesis, a nonlinear axisymmetric diffusion model is developed to describe radial density profiles of circumferential gaps in planetary rings created by embedded moons (Grätz et al., 2018). The model accounts for the gravitational scattering of the ring particles by the embedded moon and for the counteracting viscous diffusion of the ring matter back into the gap. With test particle simulations it is shown that the scattering of the ring particles passing the moon is larger for small impact parameters than estimated by Goldreich and Tremaine (1980). This is especially significant for the modeling of the Keeler gap. The model is applied to the Encke and Keeler gaps with the aim to estimate the shear viscosity of the ring in their vicinities. In addition, the model is used to analyze whether tiny icy moons whose dimensions lie below Cassini's resolution capabilities would be able to cause the poorly understood gap structure of the C ring and the Cassini Division. One of the most intriguing facets of Saturn's rings are the extremely sharp edges of the Encke and Keeler gaps: UVIS-scans of their gap edges show that the optical depth drops from order unity to zero over a range of far less than 100 m, a spatial scale comparable to the ring's vertical extent. This occurs despite the fact that the range over which a moon transfers angular momentum onto the ring material is much larger. Borderies et al. (1982, 1989) have shown that this striking feature is likely related to the local reversal of the usually outward-directed viscous transport of angular momentum in strongly perturbed regions. We have revised the Borderies et al. (1989) model using a granular flow model to define the shear and bulk viscosities, ν and ζ, in order to incorporate the angular momentum flux reversal effect into the axisymmetric diffusion model for circumferential gaps presented in this thesis (Grätz et al., 2019). The sharp Encke and Keeler gap edges are modeled and conclusions regarding the shear and bulk viscosities of the ring are discussed. Finally, we explore the question of whether the radial density profile of the central and outer A ring, recently measured by Tiscareno and Harris (2018) in the highest resolution to date, and in particular, the sharp outer A ring edge can be modeled consistently from the balance of gravitational scattering by several outer moons and the mass and momentum transport. To this aim, the developed model is extended to account for the inward drifts caused by multiple discrete and overlapping resonances with multiple outer satellites and is then used to hydrodynamically simulate the normalized surface mass density profile of the A ring. This section of the thesis is based on studies by Tajeddine et al. (2017a) who recently discussed the common misconception that the 7:6 resonance with Janus alone maintains the outer A ring edge, showing that the combined effort of several resonances with several outer moons is required to confine the A ring as observed by the Cassini spacecraft.},
  language  = {en}
}
@article{DunsingPetrichChiantia2021,
  author    = {Dunsing, Valentin and Petrich, Annett and Chiantia, Salvatore},
  title     = {Multicolor fluorescence fluctuation spectroscopy in living cells via spectral detection},
  series = {eLife},
  volume    = {10},
  journal   = {eLife},
  publisher = {eLife Sciences Publications},
  address   = {Cambridge},
  issn      = {2050-084X},
  doi       = {10.7554/eLife.69687},
  pages     = {33},
  year      = {2021},
  abstract  = {Signaling pathways in biological systems rely on specific interactions between multiple biomolecules. Fluorescence fluctuation spectroscopy provides a powerful toolbox to quantify such interactions directly in living cells. Cross-correlation analysis of spectrally separated fluctuations provides information about intermolecular interactions but is usually limited to two fluorophore species. Here, we present scanning fluorescence spectral correlation spectroscopy (SFSCS), a versatile approach that can be implemented on commercial confocal microscopes, allowing the investigation of interactions between multiple protein species at the plasma membrane. We demonstrate that SFSCS enables cross-talk-free cross-correlation, diffusion, and oligomerization analysis of up to four protein species labeled with strongly overlapping fluorophores. As an example, we investigate the interactions of influenza A virus (IAV) matrix protein 2 with two cellular host factors simultaneously. We furthermore apply raster spectral image correlation spectroscopy for the simultaneous analysis of up to four species and determine the stoichiometry of ternary IAV polymerase complexes in the cell nucleus.},
  language  = {en}
}
@phdthesis{Klumpp2003,
  author    = {Klumpp, Stefan},
  title     = {Movements of molecular motors : diffusion and directed walks},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000806},
  school      = {Universit{\"a}t Potsdam},
  year      = {2003},
  abstract  = {Bewegungen von prozessiven molekularen Motoren des Zytoskeletts sind durch ein Wechselspiel von gerichteter Bewegung entlang von Filamenten und Diffusion in der umgebenden L{\"o}sung gekennzeichnet. Diese eigent{\"u}mlichen Bewegungen werden in der vorliegenden Arbeit untersucht, indem sie als Random Walks auf einem Gitter modelliert werden. Ein weiterer Gegenstand der Untersuchung sind Effekte von Wechselwirkungen zwischen den Motoren auf diese Bewegungen. Im einzelnen werden vier Transportph{\"a}nomene untersucht: (i) Random Walks von einzelnen Motoren in Kompartimenten verschiedener Geometrien, (ii) station{\"a}re Konzentrationsprofile, die sich in geschlossenen Kompartimenten infolge dieser Bewegungen einstellen, (iii) randinduzierte Phasen{\"u}berg{\"a}nge in offenen r{\"o}hrenartigen Kompartimenten, die an Motorenreservoirs gekoppelt sind, und (iv) der Einfluß von kooperativen Effekten bei der Motor-Filament-Bindung auf die Bewegung. Alle diese Ph{\"a}nomene sind experimentell zug{\"a}nglich, und m{\"o}gliche experimentelle Realisierungen werden diskutiert.},
  language  = {en}
}
@phdthesis{Šustr2020,
  author    = {Šustr, David},
  title     = {Molecular diffusion in polyelectrolyte multilayers},
  doi       = {10.25932/publishup-48903},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489038},
  school      = {Universit{\"a}t Potsdam},
  pages     = {106},
  year      = {2020},
  abstract  = {Research on novel and advanced biomaterials is an indispensable step towards their applications in desirable fields such as tissue engineering, regenerative medicine, cell culture, or biotechnology. The work presented here focuses on such a promising material: polyelectrolyte multilayer (PEM) composed of hyaluronic acid (HA) and poly(L-lysine) (PLL). This gel-like polymer surface coating is able to accumulate (bio-)molecules such as proteins or drugs and release them in a controlled manner. It serves as a mimic of the extracellular matrix (ECM) in composition and intrinsic properties. These qualities make the HA/PLL multilayers a promising candidate for multiple bio-applications such as those mentioned above. The work presented aims at the development of a straightforward approach for assessment of multi-fractional diffusion in multilayers (first part) and at control of local molecular transport into or from the multilayers by laser light trigger (second part). The mechanism of the loading and release is governed by the interaction of bioactives with the multilayer constituents and by the diffusion phenomenon overall. The diffusion of a molecule in HA/PLL multilayers shows multiple fractions of different diffusion rate. Approaches, that are able to assess the mobility of molecules in such a complex system, are limited. This shortcoming motivated the design of a novel evaluation tool presented here. The tool employs a simulation-based approach for evaluation of the data acquired by fluorescence recovery after photobleaching (FRAP) method. In this approach, possible fluorescence recovery scenarios are primarily simulated and afterwards compared with the data acquired while optimizing parameters of a model until a sufficient match is achieved. Fluorescent latex particles of different sizes and fluorescein in an aqueous medium are utilized as test samples validating the analysis results. The diffusion of protein cytochrome c in HA/PLL multilayers is evaluated as well. This tool significantly broadens the possibilities of analysis of spatiotemporal FRAP data, which originate from multi-fractional diffusion, while striving to be widely applicable. This tool has the potential to elucidate the mechanisms of molecular transport and empower rational engineering of the drug release systems. The second part of the work focuses on the fabrication of such a spatiotemporarily-controlled drug release system employing the HA/PLL multilayer. This release system comprises different layers of various functionalities that together form a sandwich structure. The bottom layer, which serves as a reservoir, is formed by HA/PLL PEM deposited on a planar glass substrate. On top of the PEM, a layer of so-called hybrids is deposited. The hybrids consist of thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) -based hydrogel microparticles with surface-attached gold nanorods. The layer of hybrids is intended to serve as a gate that controls the local molecular transport through the PEM-solution-interface. The possibility of stimulating the molecular transport by near-infrared (NIR) laser irradiation is being explored. From several tested approaches for the deposition of hybrids onto the PEM surface, the drying-based approach was identified as optimal. Experiments, that examine the functionality of the fabricated sandwich at elevated temperature, document the reversible volume phase transition of the PEM-attached hybrids while sustaining the sandwich stability. Further, the gold nanorods were shown to effectively absorb light radiation in the tissue- and cell-friendly NIR spectral region while transducing the energy of light into heat. The rapid and reversible shrinkage of the PEM-attached hybrids was thereby achieved. Finally, dextran was employed as a model transport molecule. It loads into the PEM reservoir in a few seconds with the partition constant of 2.4, while it spontaneously releases in a slower, sustained manner. The local laser irradiation of the sandwich, which contains the fluorescein isothiocyanate tagged dextran, leads to a gradual reduction of fluorescence intensity in the irradiated region. The release system fabricated employs renowned photoresponsivity of the hybrids in an innovative setting. The results of the research are a step towards a spatially-controlled on-demand drug release system that paves the way to spatiotemporally controlled drug release. The approaches developed in this work have the potential to elucidate the molecular dynamics in ECM and to foster engineering of multilayers with properties tuned to mimic the ECM. The work aims at spatiotemporal control over the diffusion of bioactives and their presentation to the cells.},
  language  = {en}
}
@article{SpallanzaniKogaCichyetal.2022,
  author    = {Spallanzani, Roberta and Koga, Kenneth T. and Cichy, Sarah B. and Wiedenbeck, Michael and Schmidt, Burkhard C. and Oelze, Marcus and Wilke, Max},
  title     = {Lithium and boron diffusivity and isotopic fractionation in hydrated rhyolitic melts},
  series = {Contributions to mineralogy and petrology},
  volume    = {177},
  journal   = {Contributions to mineralogy and petrology},
  number    = {8},
  publisher = {Springer},
  address   = {New York},
  issn      = {0010-7999},
  doi       = {10.1007/s00410-022-01937-2},
  pages     = {17},
  year      = {2022},
  abstract  = {Lithium and boron are trace components of magmas, released during exsolution of a gas phase during volcanic activity. In this study, we determine the diffusivity and isotopic fractionation of Li and B in hydrous silicate melts. Two glasses were synthesized with the same rhyolitic composition (4.2 wt\% water), having different Li and B contents; these were studied in diffusion-couple experiments that were performed using an internally heated pressure vessel, operated at 300 MPa in the temperature range 700-1250 degrees C for durations from 0 s to 24 h. From this we determined activation energies for Li and B diffusion of 57 +/- 4 kJ/mol and 152 +/- 15 kJ/mol with pre-exponential factors of 1.53 x 10(-7) m(2)/s and 3.80 x 10(-8) m(2)/s, respectively. Lithium isotopic fractionation during diffusion gave beta values between 0.15 and 0.20, whereas B showed no clear isotopic fractionation. Our Li diffusivities and isotopic fractionation results differ somewhat from earlier published values, but overall confirm that Li diffusivity increases with water content. Our results on B diffusion show that similarly to Li, B mobility increases in the presence of water. By applying the Eyring relation, we confirm that B diffusivity is limited by viscous flow in silicate melts. Our results on Li and B diffusion present a new tool for understanding degassing-related processes, offering a potential geospeedometer to measure volcanic ascent rates.},
  language  = {en}
}
@phdthesis{Spallanzani2022,
  author    = {Spallanzani, Roberta},
  title     = {Li and B in ascending magmas: an experimental study on their mobility and isotopic fractionation},
  doi       = {10.25932/publishup-56061},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-560619},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiv, 131},
  year      = {2022},
  abstract  = {This research study focuses on the behaviour of Li and B during magmatic ascent, and decompression-driven degassing related to volcanic systems. The main objective of this dissertation is to determine whether it is possible to use the diffusion properties of the two trace elements as a tool to trace magmatic ascent rate. With this objective, diffusion-couple and decompression experiments have been performed in order to study Li and B mobility in intra-melt conditions first, and then in an evolving system during decompression-driven degassing. Synthetic glasses were prepared with rhyolitic composition and an initial water content of 4.2 wt\%, and all the experiments were performed using an internally heated pressure vessel, in order to ensure a precise control on the experimental parameters such as temperature and pressure. Diffusion-couple experiments were performed with a fix pressure 300 MPa. The temperature was varied in the range of 700-1250 °C with durations between 0 seconds and 24 hours. The diffusion-couple results show that Li diffusivity is very fast and starts already at very low temperature. Significant isotopic fractionation occurs due to the faster mobility of 6Li compared to 7Li. Boron diffusion is also accelerated by the presence of water, but the results of the isotopic ratios are unclear, and further investigation would be necessary to well constrain the isotopic fractionation process of boron in hydrous silicate melts. The isotopic ratios results show that boron isotopic fractionation might be affected by the speciation of boron in the silicate melt structure, as 10B and 11B tend to have tetrahedral and trigonal coordination, respectively. Several decompression experiments were performed at 900 °C and 1000 °C, with pressures going from 300 MPa to 71-77 MPa and durations of 30 minutes, two, five and ten hours, in order to trigger water exsolution and the formation of vesicles in the sample. Textural observations and the calculation of the bubble number density confirmed that the bubble size and distribution after decompression is directly proportional to the decompression rate. The overall SIMS results of Li and B show that the two trace elements tend to progressively decrease their concentration with decreasing decompression rates. This is explained because for longer decompression times, the diffusion of Li and B into the bubbles has more time to progress and the melt continuously loses volatiles as the bubbles expand their volumes. For fast decompression, Li and B results show a concentration increase with a δ7Li and δ11B decrease close to the bubble interface, related to the sudden formation of the gas bubble, and the occurrence of a diffusion process in the opposite direction, from the bubble meniscus to the unaltered melt. When the bubble growth becomes dominant and Li and B start to exsolve into the gas phase, the silicate melt close to the bubble gets depleted in Li and B, because of a stronger diffusion of the trace elements into the bubble. Our data are being applied to different models, aiming to combine the dynamics of bubble nucleation and growth with the evolution of trace elements concentration and isotopic ratios. Here, first considerations on these models will be presented, giving concluding remarks on this research study. All in all, the final remarks constitute a good starting point for further investigations. These results are a promising base to continue to study this process, and Li and B can indeed show clear dependences on decompression-related magma ascent rates in volcanic systems.},
  language  = {en}
}
@article{ThapaWyłomańskaSikoraetal.2021,
  author    = {Thapa, Samudrajit and Wyłomańska, Agnieszka and Sikora, Grzegorz and Wagner, Caroline E. and Krapf, Diego and Kantz, Holger and Chechkin, Aleksei V. and Metzler, Ralf},
  title     = {Leveraging large-deviation statistics to decipher the stochastic properties of measured trajectories},
  series = {New Journal of Physics},
  volume    = {23},
  journal   = {New Journal of Physics},
  publisher = {Dt. Physikalische Ges. ; IOP},
  address   = {Bad Honnef ; London},
  issn      = {1367-2630},
  doi       = {10.1088/1367-2630/abd50e},
  pages     = {22},
  year      = {2021},
  abstract  = {Extensive time-series encoding the position of particles such as viruses, vesicles, or individualproteins are routinely garnered insingle-particle tracking experiments or supercomputing studies.They contain vital clues on how viruses spread or drugs may be delivered in biological cells.Similar time-series are being recorded of stock values in financial markets and of climate data.Such time-series are most typically evaluated in terms of time-averaged mean-squareddisplacements (TAMSDs), which remain random variables for finite measurement times. Theirstatistical properties are different for differentphysical stochastic processes, thus allowing us toextract valuable information on the stochastic process itself. To exploit the full potential of thestatistical information encoded in measured time-series we here propose an easy-to-implementand computationally inexpensive new methodology, based on deviations of the TAMSD from itsensemble average counterpart. Specifically, we use the upper bound of these deviations forBrownian motion (BM) to check the applicability of this approach to simulated and real data sets.By comparing the probability of deviations fordifferent data sets, we demonstrate how thetheoretical bound for BM reveals additional information about observed stochastic processes. Weapply the large-deviation method to data sets of tracer beads tracked in aqueous solution, tracerbeads measured in mucin hydrogels, and of geographic surface temperature anomalies. Ouranalysis shows how the large-deviation properties can be efficiently used as a simple yet effectiveroutine test to reject the BM hypothesis and unveil relevant information on statistical propertiessuch as ergodicity breaking and short-time correlations.},
  language  = {en}
}
@misc{ThapaWyłomańskaSikoraetal.2021,
  author    = {Thapa, Samudrajit and Wyłomańska, Agnieszka and Sikora, Grzegorz and Wagner, Caroline E. and Krapf, Diego and Kantz, Holger and Chechkin, Aleksei V. and Metzler, Ralf},
  title     = {Leveraging large-deviation statistics to decipher the stochastic properties of measured trajectories},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1118},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-49349},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-493494},
  pages     = {24},
  year      = {2021},
  abstract  = {Extensive time-series encoding the position of particles such as viruses, vesicles, or individualproteins are routinely garnered insingle-particle tracking experiments or supercomputing studies.They contain vital clues on how viruses spread or drugs may be delivered in biological cells.Similar time-series are being recorded of stock values in financial markets and of climate data.Such time-series are most typically evaluated in terms of time-averaged mean-squareddisplacements (TAMSDs), which remain random variables for finite measurement times. Theirstatistical properties are different for differentphysical stochastic processes, thus allowing us toextract valuable information on the stochastic process itself. To exploit the full potential of thestatistical information encoded in measured time-series we here propose an easy-to-implementand computationally inexpensive new methodology, based on deviations of the TAMSD from itsensemble average counterpart. Specifically, we use the upper bound of these deviations forBrownian motion (BM) to check the applicability of this approach to simulated and real data sets.By comparing the probability of deviations fordifferent data sets, we demonstrate how thetheoretical bound for BM reveals additional information about observed stochastic processes. Weapply the large-deviation method to data sets of tracer beads tracked in aqueous solution, tracerbeads measured in mucin hydrogels, and of geographic surface temperature anomalies. Ouranalysis shows how the large-deviation properties can be efficiently used as a simple yet effectiveroutine test to reject the BM hypothesis and unveil relevant information on statistical propertiessuch as ergodicity breaking and short-time correlations.},
  language  = {en}
}
@phdthesis{Roder2018,
  author    = {Roder, Phillip},
  title     = {Kombination von Fluoreszenzmikroskopie und Rasterkraftmikroskopie zur Aufkl{\"a}rung physiologischer Prozesse in lebenden Zellen},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-419806},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 113},
  year      = {2018},
  abstract  = {Innerhalb dieser Doktorarbeit wurde eine neuartige Mikromanipulationstechnik f{\"u}r die lokale Fl{\"u}ssigkeitsabgabe am komplexen Dr{\"u}sengewebe der Schabe P. americana charakterisiert und f{\"u}r die damit verbundene gezielte Manipulation von einzelnen Zellen in einem Zellkomplex (Gewebe) angewandt. Bei dieser Mikromanipulationstechnik handelt es sich um die seit 2009 bekannte nanofluidische Rasterkraftmikroskopie (FluidFM = fluidic force microscopy). Dabei werden sehr kleine mikrokan{\"a}lige Rasterkraftspitzen bzw. Mikro-/Nanopipetten mit einer {\"O}ffnung zwischen 300 nm und 2 µm verwendet, mit denen es m{\"o}glich ist, sehr kleine Volumina im Pikoliter- bis Femtoliter-Bereich (10-12 L - 10-15 L) gezielt und ortsgenau abzugeben. Das Ziel dieser Arbeit war die Analyse zellul{\"a}rer Prozesse, wie z. B. Zell-Zell-Kommunikation oder Signalweiterleitung, zwischen benachbarten Zellen unter Zuhilfenahme der Fluoreszenzmikroskopie. Mit dieser Methode k{\"o}nnen die Zellen und ihre Bestandteile mittels vorheriger Farbstoffbeladung unter einem Mikroskop mit hohem Kontrast optisch dargestellt werden. Mit Hilfe der Fluoreszenzmikroskopie sollten schlussendlich die zellul{\"a}ren Reaktionen innerhalb des Gewebes nach der lokalen Manipulation visualisiert werden. Zun{\"a}chst wurde die Anwendung des Systems an Luft und w{\"a}ssriger Umgebung beschrieben. In diesem Zusammenhang wurde eine Reinigungs- und Beladungsmethode entwickelt, mit der es m{\"o}glich war, die kostspieligen Mikro-/Nanopipetten zu reinigen und anschließend mehrmals wiederzuverwenden. Hierzu wurde eine alternative Methode getestet, mit der das Diffusionsverhalten von Farbstoffmolek{\"u}len in unterschiedlichen Medien untersucht werden kann. Des Weiteren wurden die Systemparameter optimiert, welche n{\"o}tig sind, um zwischen der Probenoberfl{\"a}che und der Pipette einen guten Pipetten{\"o}ffnungs-abschluss zu erhalten. Dieser Abschluss ist essentiell, damit die abgegebene Fl{\"u}ssigkeit ausschließlich in der Abgaberegion mit der Probe wechselwirkt und die darauffolgenden Reaktionen nur innerhalb des Gewebes erfolgen, da ansonsten die Zell-Zell-Signalweiterleitung zwischen den Zellen nicht eindeutig nachvollzogen werden kann. Diese interzellul{\"a}re Kommunikation wurde anhand zweier sekund{\"a}rer Botenstoffe (Ca2+ und NO) untersucht. Hierbei war es m{\"o}glich einzelne lokale Reaktionen zu detektieren, welche sich {\"u}ber weitere Zellen ausbreiteten. Schlussendlich wurde die Fertigung einer speziellen Injektionspipette beschrieben, welche an zwei biologischen Systemen getestet wurde.},
  language  = {de}
}
@article{SeissAlbersSremčevićetal.2019,
  author    = {Seiß, Martin and Albers, Nicole and Sremčević, Miodrag and Schmidt, J{\"u}rgen and Salo, Heikki and Seiler, Michael and Hoffmann, Holger and Spahn, Frank},
  title     = {Hydrodynamic Simulations of Moonlet-induced Propellers in Saturn's Rings},
  series = {The astronomical journal},
  volume    = {157},
  journal   = {The astronomical journal},
  number    = {1},
  publisher = {IOP Publishing Ltd.},
  address   = {Bristol},
  issn      = {0004-6256},
  doi       = {10.3847/1538-3881/aaed44},
  pages     = {11},
  year      = {2019},
  abstract  = {One of the biggest successes of the Cassini mission is the detection of small moons (moonlets) embedded in Saturns rings that cause S-shaped density structures in their close vicinity, called propellers. Here, we present isothermal hydrodynamic simulations of moonlet-induced propellers in Saturn's A ring that denote a further development of the original model. We find excellent agreement between these new hydrodynamic and corresponding N-body simulations. Furthermore, the hydrodynamic simulations confirm the predicted scaling laws and the analytical solution for the density in the propeller gaps. Finally, this mean field approach allows us to simulate the pattern of the giant propeller Bl{\´e}riot, which is too large to be modeled by direct N-body simulations. Our results are compared to two stellar occultation observations by the Cassini Ultraviolet Imaging Spectrometer (UVIS), which intersect the propeller Bl{\´e}riot. Best fits to the UVIS optical depth profiles are achieved for a Hill radius of 590 m, which implies a moonlet diameter of about 860 m. Furthermore, the model favors a kinematic shear viscosity of the surrounding ring material of ν0 = 340 cm2 s-1, a dispersion velocity in the range of 0.3 cm s-1 < c0 < 1.5 cm s-1, and a fairly high bulk viscosity 7 < ξ0/ν0 < 17. These large transport values might be overestimated by our isothermal ring model and should be reviewed by an extended model including thermal fluctuations.},
  language  = {en}
}
@article{ProkopovicDuschlVolodkin2015,
  author    = {Prokopovic, Vladimir Z. and Duschl, Claus and Volodkin, Dmitry},
  title     = {Hyaluronic Acid/Poly-l-Lysine Multilayers as Reservoirs for Storage and Release of Small Charged Molecules},
  series = {Macromolecular bioscience},
  volume    = {15},
  journal   = {Macromolecular bioscience},
  number    = {10},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {1616-5187},
  doi       = {10.1002/mabi.201500093},
  pages     = {1357 -- 1363},
  year      = {2015},
  abstract  = {Polyelectrolyte multilayer films are nowadays very attractive for bioapplications due to their tunable properties and ability to control cellular response. Here we demonstrate that multilayers made of hyaluronic acid and poly-l-lysine act as high-capacity reservoirs for small charged molecules. Strong accumulation within the film is explained by electrostatically driven binding to free charges of polyelectrolytes. Binding and release mechanisms are discussed based on charge balance and polymer dynamics in the film. Our results show that transport of molecules through the film-solution interface limits the release rate. The multilayers might serve as an effective platform for drug delivery and tissue engineering due to high potential for drug loading and controlled release.},
  language  = {en}
}
@article{PalyulinMetzler2012,
  author    = {Palyulin, Vladimir V. and Metzler, Ralf},
  title     = {How a finite potential barrier decreases the mean first-passage time},
  series = {Journal of statistical mechanics: theory and experiment},
  journal   = {Journal of statistical mechanics: theory and experiment},
  number    = {1},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {1742-5468},
  doi       = {10.1088/1742-5468/2012/03/L03001},
  pages     = {10},
  year      = {2012},
  abstract  = {We consider the mean first-passage time of a random walker moving in a potential landscape on a finite interval, the starting and end points being at different potentials. From analytical calculations and Monte Carlo simulations we demonstrate that the mean first-passage time for a piecewise linear curve between these two points is minimized by the introduction of a potential barrier. Due to thermal fluctuations, this barrier may be crossed. It turns out that the corresponding expense for this activation is less severe than the gain from an increased slope towards the end point. In particular, the resulting mean first-passage time is shorter than for a linear potential drop between the two points.},
  language  = {en}
}
@misc{GrebenkovMetzlerOshanin2020,
  author    = {Grebenkov, Denis S. and Metzler, Ralf and Oshanin, Gleb},
  title     = {From single-particle stochastic kinetics to macroscopic reaction rates},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1018},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-48405},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-484059},
  pages     = {29},
  year      = {2020},
  abstract  = {We consider the first-passage problem for N identical independent particles that are initially released uniformly in a finite domain Ω and then diffuse toward a reactive area Γ, which can be part of the outer boundary of Ω or a reaction centre in the interior of Ω. For both cases of perfect and partial reactions, we obtain the explicit formulas for the first two moments of the fastest first-passage time (fFPT), i.e., the time when the first out of the N particles reacts with Γ. Moreover, we investigate the full probability density of the fFPT. We discuss a significant role of the initial condition in the scaling of the average fFPT with the particle number N, namely, a much stronger dependence (1/N and 1/N² for partially and perfectly reactive targets, respectively), in contrast to the well known inverse-logarithmic behaviour found when all particles are released from the same fixed point. We combine analytic solutions with scaling arguments and stochastic simulations to rationalise our results, which open new perspectives for studying the relevance of multiple searchers in various situations of molecular reactions, in particular, in living cells.},
  language  = {en}
}
@article{GrebenkovMetzlerOshanin2020,
  author    = {Grebenkov, Denis S. and Metzler, Ralf and Oshanin, Gleb},
  title     = {From single-particle stochastic kinetics to macroscopic reaction rates},
  series = {New Journal of Physics},
  volume    = {22},
  journal   = {New Journal of Physics},
  publisher = {Dt. Physikalische Ges.},
  address   = {Bad Honnef},
  issn      = {1367-2630},
  doi       = {10.1088/1367-2630/abb1de},
  pages     = {28},
  year      = {2020},
  abstract  = {We consider the first-passage problem for N identical independent particles that are initially released uniformly in a finite domain Ω and then diffuse toward a reactive area Γ, which can be part of the outer boundary of Ω or a reaction centre in the interior of Ω. For both cases of perfect and partial reactions, we obtain the explicit formulas for the first two moments of the fastest first-passage time (fFPT), i.e., the time when the first out of the N particles reacts with Γ. Moreover, we investigate the full probability density of the fFPT. We discuss a significant role of the initial condition in the scaling of the average fFPT with the particle number N, namely, a much stronger dependence (1/N and 1/N² for partially and perfectly reactive targets, respectively), in contrast to the well known inverse-logarithmic behaviour found when all particles are released from the same fixed point. We combine analytic solutions with scaling arguments and stochastic simulations to rationalise our results, which open new perspectives for studying the relevance of multiple searchers in various situations of molecular reactions, in particular, in living cells.},
  language  = {en}
}
@article{GraetzSeissSpahn2018,
  author    = {Gr{\"a}tz, Fabio M. and Seiss, Martin and Spahn, Frank},
  title     = {Formation of moon-induced gaps in dense planetary rings},
  series = {The astrophysical journal : an international review of spectroscopy and astronomical physics},
  volume    = {862},
  journal   = {The astrophysical journal : an international review of spectroscopy and astronomical physics},
  number    = {2},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {0004-637X},
  doi       = {10.3847/1538-4357/aace00},
  pages     = {9},
  year      = {2018},
  abstract  = {We develop an axisymmetric diffusion model to describe radial density profiles in the vicinity of tiny moons embedded in planetary rings. Our diffusion model accounts for the gravitational scattering of the ring particles by an embedded moon and for the viscous diffusion of the ring matter back into the gap. With test particle simulations, we show that the scattering of the ring particles passing the moon is larger for small impact parameters than estimated by Goldreich \& Tremaine and Namouni. This is significant for modeling the Keeler gap. We apply our model to the gaps of the moons Pan and Daphnis embedded in the outer A ring of Saturn with the aim to estimate the shear viscosity of the ring in the vicinity of the Encke and Keeler gap. In addition, we analyze whether tiny icy moons whose dimensions lie below Cassini's resolution capabilities would be able to explain the gap structure of the C ring and the Cassini division.},
  language  = {en}
}
@misc{WoodfieldHorneGlauertetal.2018,
  author    = {Woodfield, Emma E. and Horne, Richard B. and Glauert, Sarah A. and Menietti, John D. and Shprits, Yuri and Kurth, William S.},
  title     = {Formation of electron radiation belts at Saturn by Z-mode wave acceleration},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1032},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46834},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-468342},
  pages     = {9},
  year      = {2018},
  abstract  = {At Saturn electrons are trapped in the planet's magnetic field and accelerated to relativistic energies to form the radiation belts, but how this dramatic increase in electron energy occurs is still unknown. Until now the mechanism of radial diffusion has been assumed but we show here that in-situ acceleration through wave particle interactions, which initial studies dismissed as ineffectual at Saturn, is in fact a vital part of the energetic particle dynamics there. We present evidence from numerical simulations based on Cassini spacecraft data that a particular plasma wave, known as Z-mode, accelerates electrons to MeV energies inside 4 R-S (1 R-S = 60,330 km) through a Doppler shifted cyclotron resonant interaction. Our results show that the Z-mode waves observed are not oblique as previously assumed and are much better accelerators than O-mode waves, resulting in an electron energy spectrum that closely approaches observed values without any transport effects included.},
  language  = {en}
}
@article{SposiniChechkinMetzler2018,
  author    = {Sposini, Vittoria and Chechkin, Aleksei V. and Metzler, Ralf},
  title     = {First passage statistics for diffusing diffusivity},
  series = {Journal of physics : A, Mathematical and theoretical},
  volume    = {52},
  journal   = {Journal of physics : A, Mathematical and theoretical},
  number    = {4},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {1751-8113},
  doi       = {10.1088/1751-8121/aaf6ff},
  pages     = {11},
  year      = {2018},
  abstract  = {A rapidly increasing number of systems is identified in which the stochastic motion of tracer particles follows the Brownian law < r(2)(t)> similar or equal to Dt yet the distribution of particle displacements is strongly non-Gaussian. A central approach to describe this effect is the diffusing diffusivity (DD) model in which the diffusion coefficient itself is a stochastic quantity, mimicking heterogeneities of the environment encountered by the tracer particle on its path. We here quantify in terms of analytical and numerical approaches the first passage behaviour of the DD model. We observe significant modifications compared to Brownian-Gaussian diffusion, in particular that the DD model may have a faster first passage dynamics. Moreover we find a universal crossover point of the survival probability independent of the initial condition.},
  language  = {en}
}
@article{MutothyaXuLietal.2021,
  author    = {Mutothya, Nicholas Mwilu and Xu, Yong and Li, Yongge and Metzler, Ralf and Mutua, Nicholas Muthama},
  title     = {First passage dynamics of stochastic motion in heterogeneous media driven by correlated white Gaussian and coloured non-Gaussian noises},
  series = {Journal of physics. Complexity},
  volume    = {2},
  journal   = {Journal of physics. Complexity},
  publisher = {IOP Publishing},
  address   = {Bristol},
  issn      = {2632-072X},
  doi       = {10.1088/2632-072X/ac35b5},
  pages     = {24},
  year      = {2021},
  abstract  = {We study the first passage dynamics for a diffusing particle experiencing a spatially varying diffusion coefficient while driven by correlated additive Gaussian white noise and multiplicative coloured non-Gaussian noise. We consider three functional forms for position dependence of the diffusion coefficient: power-law, exponential, and logarithmic. The coloured non-Gaussian noise is distributed according to Tsallis' q-distribution. Tracks of the non-Markovian systems are numerically simulated by using the fourth-order Runge-Kutta algorithm and the first passage times (FPTs) are recorded. The FPT density is determined along with the mean FPT (MFPT). Effects of the noise intensity and self-correlation of the multiplicative noise, the intensity of the additive noise, the cross-correlation strength, and the non-extensivity parameter on the MFPT are discussed.},
  language  = {en}
}
@article{ShinCherstvyKimetal.2015,
  author    = {Shin, Jaeoh and Cherstvy, Andrey G. and Kim, Won Kyu and Metzler, Ralf},
  title     = {Facilitation of polymer looping and giant polymer diffusivity in crowded solutions of active particles},
  series = {New journal of physics : the open-access journal for physics},
  volume    = {17},
  journal   = {New journal of physics : the open-access journal for physics},
  publisher = {IOP Publ. Ltd.},
  address   = {Bristol},
  issn      = {1367-2630},
  doi       = {10.1088/1367-2630/17/11/113008},
  pages     = {12},
  year      = {2015},
  abstract  = {We study the dynamics of polymer chains in a bath of self-propelled particles (SPP) by extensive Langevin dynamics simulations in a two-dimensional model system. Specifically, we analyse the polymer looping properties versus the SPP activity and investigate how the presence of the active particles alters the chain conformational statistics. We find that SPPs tend to extend flexible polymer chains, while they rather compactify stiffer semiflexible polymers, in agreement with previous results. Here we show that higher activities of SPPs yield a higher effective temperature of the bath and thus facilitate the looping kinetics of a passive polymer chain. We explicitly compute the looping probability and looping time in a wide range of the model parameters. We also analyse the motion of a monomeric tracer particle and the polymer's centre of mass in the presence of the active particles in terms of the time averaged mean squared displacement, revealing a giant diffusivity enhancement for the polymer chain via SPP pooling. Our results are applicable to rationalising the dimensions and looping kinetics of biopolymers at constantly fluctuating and often actively driven conditions inside biological cells or in suspensions of active colloidal particles or bacteria cells.},
  language  = {en}
}
@article{GrebenkovSposiniMetzleretal.2020,
  author    = {Grebenkov, Denis S. and Sposini, Vittoria and Metzler, Ralf and Oshanin, Gleb and Seno, Flavio},
  title     = {Exact distributions of the maximum and range of random diffusivity processes},
  series = {New Journal of Physics},
  volume    = {23},
  journal   = {New Journal of Physics},
  publisher = {Dt. Physikalische Ges.},
  address   = {Bad Honnef},
  issn      = {1367-2630},
  doi       = {10.1088/1367-2630/abd313},
  pages     = {23},
  year      = {2020},
  abstract  = {We study the extremal properties of a stochastic process xt defined by the Langevin equation ẋₜ =√2Dₜ ξₜ, in which ξt is a Gaussian white noise with zero mean and Dₜ is a stochastic'diffusivity', defined as a functional of independent Brownian motion Bₜ.We focus on threechoices for the random diffusivity Dₜ: cut-off Brownian motion, Dₜt ∼ Θ(Bₜ), where Θ(x) is the Heaviside step function; geometric Brownian motion, Dₜ ∼ exp(-Bₜ); and a superdiffusive process based on squared Brownian motion, Dₜ ∼ B²ₜ. For these cases we derive exact expressions for the probability density functions of the maximal positive displacement and of the range of the process xₜ on the time interval ₜ ∈ (0, T).We discuss the asymptotic behaviours of the associated probability density functions, compare these against the behaviour of the corresponding properties of standard Brownian motion with constant diffusivity (Dₜ = D0) and also analyse the typical behaviour of the probability density functions which is observed for a majority of realisations of the stochastic diffusivity process.},
  language  = {en}
}