@article{CrovettoHempelRusuetal.2020,
  author    = {Crovetto, Andrea and Hempel, Hannes and Rusu, Marin and Choubrac, Leo and Kojda, Sandrino Danny and Habicht, Klaus and Unold, Thomas},
  title     = {Water adsorption enhances electrical conductivity in transparent p-type CuI},
  series = {ACS applied materials \& interfaces},
  volume    = {12},
  journal   = {ACS applied materials \& interfaces},
  number    = {43},
  publisher = {American Chemical Society},
  address   = {Washington, DC},
  issn      = {1944-8244},
  doi       = {10.1021/acsami.0c11040},
  pages     = {48741 -- 48747},
  year      = {2020},
  abstract  = {CuI has been recently rediscovered as a p-type transparent conductor with a high figure of merit. Even though many metal iodides are hygroscopic, the effect of moisture on the electrical properties of CuI has not been clarified. In this work, we observe a 2-fold increase in the conductivity of CuI after exposure to ambient humidity for 5 h, followed by slight long-term degradation. Simultaneously, the work function of CuI decreases by almost 1 eV, which can explain the large spread in the previously reported work function values. The conductivity increase is partially reversible and is maximized at intermediate humidity levels. On the basis of the large intragrain mobility measured by THz spectroscopy, we suggest that hydration of grain boundaries may be beneficial for the overall hole mobility.},
  language  = {en}
}
@article{LeCorreStolterfohtPerdigonToroetal.2019,
  author    = {Le Corre, Vincent M. and Stolterfoht, Martin and Perdig{\´o}n-Toro, Lorena and Feuerstein, Markus and Wolff, Christian Michael and Gil-Escrig, Lidon and Bolink, Henk J. and Neher, Dieter and Koster, L. Jan Anton},
  title     = {Charge Transport Layers Limiting the Efficiency of Perovskite Solar Cells: How To Optimize Conductivity, Doping, and Thickness},
  series = {ACS Applied Energy Materials},
  volume    = {2},
  journal   = {ACS Applied Energy Materials},
  number    = {9},
  publisher = {American Chemical Society},
  address   = {Washington},
  issn      = {2574-0962},
  doi       = {10.1021/acsaem.9b00856},
  pages     = {6280 -- 6287},
  year      = {2019},
  abstract  = {Perovskite solar cells (PSCs) are one of the main research topics of the photovoltaic community; with efficiencies now reaching up to 24\%, PSCs are on the way to catching up with classical inorganic solar cells. However, PSCs have not yet reached their full potential. In fact, their efficiency is still limited by nonradiative recombination, mainly via trap-states and by losses due to the poor transport properties of the commonly used transport layers (TLs). Indeed, state-of-the-art TLs (especially if organic) suffer from rather low mobilities, typically within 10(-5) and 10(-2) cm(-2) V-1 s(-1), when compared to the high mobilities, 1-10 cm(-2) V-1 s(-1), measured for perovskites. This work presents a comprehensive analysis of the effect of the mobility, thickness, and doping density of the transport layers based on combined experimental and modeling results of two sets of devices made of a solution-processed high-performing triple-cation (PCE approximate to 20\%). The results are also cross-checked on vacuum-processed MAPbI(3) devices. From this analysis, general guidelines on how to optimize a TL are introduced and especially a new and simple formula to easily calculate the amount of doping necessary to counterbalance the low mobility of the TLs.},
  language  = {en}
}
@article{PingelArvindKoellnetal.2016,
  author    = {Pingel, Patrick and Arvind, Malavika and K{\"o}lln, Lisa and Steyrleuthner, Robert and Kraffert, Felix and Behrends, Jan and Janietz, Silvia and Neher, Dieter},
  title     = {p-Type Doping of Poly(3-hexylthiophene) with the Strong Lewis Acid Tris(pentafluorophenyl)borane},
  series = {Advanced electronic materials},
  volume    = {2},
  journal   = {Advanced electronic materials},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {2199-160X},
  doi       = {10.1002/aelm.201600204},
  pages     = {7},
  year      = {2016},
  abstract  = {State-of-the-art p-type doping of organic semiconductors is usually achieved by employing strong -electron acceptors, a prominent example being tetrafluorotetracyanoquinodimethane (F(4)TCNQ). Here, doping of the semiconducting model polymer poly(3-hexylthiophene), P3HT, using the strong Lewis acid tris(pentafluorophenyl)borane (BCF) as a dopant, is investigated by admittance, conductivity, and electron paramagnetic resonance measurements. The electrical characteristics of BCF- and F(4)TCNQ-doped P3HT layers are shown to be very similar in terms of the mobile hole density and the doping efficiency. Roughly 18\% of the employed dopants create mobile holes in either F-4 TCNQ- or BCF-doped P3HT, while the majority of doping-induced holes remain strongly Coulomb-bound to the dopant anions. Despite similar hole densities, conductivity and hole mobility are higher in BCF-doped P3HT layers than in F(4)TCNQ-doped samples. This and the good solubility in many organic solvents render BCF very useful for p-type doping of organic semiconductors.},
  language  = {en}
}