@misc{WeymarVenturaBortWirkneretal.2018, author = {Weymar, Mathias and Ventura-Bort, Carlos and Wirkner, Janine and Wendt, Julia and Hamm, Alfons}, title = {Effects of Transcutaneous Vagus Nerve Stimulation (TVNS) on unpleasant picture processing and long-term memory}, series = {Psychophysiology : journal of the Society for Psychophysiological Research}, volume = {55}, journal = {Psychophysiology : journal of the Society for Psychophysiological Research}, publisher = {Wiley}, address = {Hoboken}, issn = {0048-5772}, pages = {S18 -- S18}, year = {2018}, language = {en} } @misc{MuellerKupschLaquaietal.2018, author = {M{\"u}ller, Bernd Randolf and Kupsch, Andreas and Laquai, Rene and Nellesen, Jens and Tillmann, Wolfgang and Kasperovich, Galina and Bruno, Giovanni}, title = {Microstructure Characterisation of Advanced Materials via 2D and 3D X-Ray Refraction Techniques}, series = {Materials Science Forum}, volume = {941}, journal = {Materials Science Forum}, publisher = {Trans Tech Publications Ltd}, address = {Zurich}, isbn = {978-3-0357-1208-7}, issn = {0255-5476}, doi = {10.4028/www.scientific.net/MSF.941.2401}, pages = {2401 -- 2406}, year = {2018}, abstract = {3D imaging techniques have an enormous potential to understand the microstructure, its evolution, and its link to mechanical, thermal, and transport properties. In this conference paper we report the use of a powerful, yet not so wide-spread, set of X-ray techniques based on refraction effects. X-ray refraction allows determining internal specific surface (surface per unit volume) in a non-destructive fashion, position and orientation sensitive, and with a nanometric detectability. We demonstrate showcases of ceramics and composite materials, where microstructural parameters could be achieved in a way unrivalled even by high-resolution techniques such as electron microscopy or computed tomography. We present in situ analysis of the damage evolution in an Al/Al2O3 metal matrix composite during tensile load and the identification of void formation (different kinds of defects, particularly unsintered powder hidden in pores, and small inhomogeneity's like cracks) in Ti64 parts produced by selective laser melting using synchrotron X-ray refraction radiography and tomography.}, language = {en} } @misc{SahlmannSchefflerSchnor2018, author = {Sahlmann, Kristina and Scheffler, Thomas and Schnor, Bettina}, title = {Ontology-driven Device Descriptions for IoT Network Management}, series = {2018 Global Internet of Things Summit (GIoTS)}, journal = {2018 Global Internet of Things Summit (GIoTS)}, publisher = {IEEE}, address = {New York}, isbn = {978-1-5386-6451-3}, doi = {10.1109/GIOTS.2018.8534569}, pages = {295 -- 300}, year = {2018}, abstract = {One particular challenge in the Internet of Things is the management of many heterogeneous things. The things are typically constrained devices with limited memory, power, network and processing capacity. Configuring every device manually is a tedious task. We propose an interoperable way to configure an IoT network automatically using existing standards. The proposed NETCONF-MQTT bridge intermediates between the constrained devices (speaking MQTT) and the network management standard NETCONF. The NETCONF-MQTT bridge generates dynamically YANG data models from the semantic description of the device capabilities based on the oneM2M ontology. We evaluate the approach for two use cases, i.e. describing an actuator and a sensor scenario.}, language = {en} } @misc{BarlowShengLaietal.2018, author = {Barlow, Axel and Sheng, Gui-Lian and Lai, Xu-Long and Hofreiter, Michael and Paijmans, Johanna L. A.}, title = {Once lost, twice found: Combined analysis of ancient giant panda sequences characterises extinct clade}, series = {Journal of biogeography}, volume = {46}, journal = {Journal of biogeography}, number = {1}, publisher = {Wiley}, address = {Hoboken}, issn = {0305-0270}, doi = {10.1111/jbi.13486}, pages = {251 -- 253}, year = {2018}, language = {en} } @misc{MazzioThulasimaniRylletal.2018, author = {Mazzio, Katherine A. and Thulasimani, Monika Raja and Ryll, Britta and Kojda, Sandrino Danny and Habicht, Klaus and Raoux, Simone}, title = {Synthetic manipulation of hybrid thermoelectric materials}, series = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, volume = {255}, journal = {Abstracts of papers : joint conference / The Chemical Institute of Cananda, CIC, American Chemical Society, ACS}, publisher = {American Chemical Society}, address = {Washington}, issn = {0065-7727}, pages = {1}, year = {2018}, language = {en} } @misc{LuehrWichtGilderetal.2018, author = {L{\"u}hr, Hermann and Wicht, Johannes and Gilder, Stuart A. and Holschneider, Matthias}, title = {General Introduction and Scientific Summary of the German Priority Program "PlanetMag"}, series = {Magnetic Fields in the Solar System}, volume = {448}, journal = {Magnetic Fields in the Solar System}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-3-319-64292-5}, issn = {0067-0057}, doi = {10.1007/978-3-319-64292-5_1}, pages = {1 -- 6}, year = {2018}, abstract = {This book aims at understanding the diversity of planetary and lunar magnetic fields and their interaction with the solar wind. A synergistic interdisciplinary approach combines newly developed tools for data acquisition and analysis, computer simulations of planetary interiors and dynamos, models of solar wind interaction, measurement of terrestrial rocks and meteorites, and laboratory investigations. The following chapters represent a selection of some of the scientific findings derived by the 22 projects within the DFG Priority Program Planetary Magnetism" (PlanetMag). This introductory chapter gives an overview of the individual following chapters, highlighting their role in the overall goals of the PlanetMag framework. The diversity of the different contributions reflects the wide range of magnetic phenomena in our solar system. From the program we have excluded magnetism of the sun, which is an independent broad research discipline, but include the interaction of the solar wind with planets and moons. Within the subsequent 13 chapters of this book, the authors review the field centered on their research topic within PlanetMag. Here we shortly introduce the content of all the subsequent chapters and outline the context in which they should be seen.}, language = {en} } @misc{LuehrWichtGilderetal.2018, author = {L{\"u}hr, Hermann and Wicht, Johannes and Gilder, Stuart A. and Holschneider, Matthias}, title = {Preface}, series = {Magnetic Fields in the Solar System: Planets, Moons and Solar Wind Interactions}, volume = {448}, journal = {Magnetic Fields in the Solar System: Planets, Moons and Solar Wind Interactions}, publisher = {Springer}, address = {Dordrecht}, isbn = {978-3-319-64292-5}, issn = {0067-0057}, pages = {V -- VI}, year = {2018}, language = {en} } @misc{GrumGronau2018, author = {Grum, Marcus and Gronau, Norbert}, title = {Process modeling within augmented reality}, series = {Business Modeling and Software Design, BMSD 2018}, volume = {319}, journal = {Business Modeling and Software Design, BMSD 2018}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-319-94214-8}, issn = {1865-1348}, doi = {10.1007/978-3-319-94214-8_7}, pages = {99 -- 115}, year = {2018}, abstract = {The collaboration during the modeling process is uncomfortable and characterized by various limitations. Faced with the successful transfer of first process modeling languages to the augmented world, non-transparent processes can be visualized in a more comprehensive way. With the aim to rise comfortability, speed, accuracy and manifoldness of real world process augmentations, a framework for the bidirectional interplay of the common process modeling world and the augmented world has been designed as morphologic box. Its demonstration proves the working of drawn AR integrations. Identified dimensions were derived from (1) a designed knowledge construction axiom, (2) a designed meta-model, (3) designed use cases and (4) designed directional interplay modes. Through a workshop-based survey, the so far best AR modeling configuration is identified, which can serve for benchmarks and implementations.}, language = {en} } @misc{SmithBookhagen2018, author = {Smith, Taylor and Bookhagen, Bodo}, title = {Using passive microwave data to understand spatio-temporal trends and dynamics in snow-water storage in High Mountain Asia}, series = {active and passive microwave remote sensing for environmental monitoring II}, volume = {10788}, journal = {active and passive microwave remote sensing for environmental monitoring II}, publisher = {SPIE-INT Soc Optical Engineering}, address = {Bellingham}, isbn = {978-1-5106-2160-2}, issn = {0277-786X}, doi = {10.1117/12.2323827}, pages = {8}, year = {2018}, abstract = {High Mountain Asia provides water for more than a billion downstream users. Many catchments receive the majority of their yearly water budget in the form of snow - the vast majority of which is not monitored by sparse weather networks. We leverage passive microwave data from the SSMI series of satellites (SSMI, SSMI/S, 1987-2016), reprocessed to 3.125 km resolution, to examine trends in the volume and spatial distribution of snow-water equivalent (SWE) in the Indus Basin. We find that the majority of the Indus has seen an increase in snow-water storage. There exists a strong elevation-trend relationship, where high-elevation zones have more positive SWE trends. Negative trends are confined to the Himalayan foreland and deeply-incised valleys which run into the Upper Indus. This implies a temperature-dependent cutoff below which precipitation increases are not translated into increased SWE. Earlier snowmelt or a higher percentage of liquid precipitation could both explain this cutoff.(1) Earlier work 2 found a negative snow-water storage trend for the entire Indus catchment over the time period 1987-2009 (-4 x 10(-3) mm/yr). In this study based on an additional seven years of data, the average trend reverses to 1.4 x 10(-3). This implies that the decade since the mid-2000s was likely wetter, and positively impacted long-term SWE trends. This conclusion is supported by an analysis of snowmelt onset and end dates which found that while long-term trends are negative, more recent (since 2005) trends are positive (moving later in the year).(3)}, language = {en} } @misc{RheinwaltBookhagen2018, author = {Rheinwalt, Aljoscha and Bookhagen, Bodo}, title = {Network-based flow accumulation for point clouds}, series = {Remote Sensing for Agriculture, Ecosystems, and Hydrology XX}, volume = {10783}, journal = {Remote Sensing for Agriculture, Ecosystems, and Hydrology XX}, publisher = {SPIE-INT Society of Photo-Optical Instrumentation Engineers}, address = {Bellingham}, isbn = {978-1-5106-2150-3}, issn = {0277-786X}, doi = {10.1117/12.2318424}, pages = {12}, year = {2018}, abstract = {Point clouds provide high-resolution topographic data which is often classified into bare-earth, vegetation, and building points and then filtered and aggregated to gridded Digital Elevation Models (DEMs) or Digital Terrain Models (DTMs). Based on these equally-spaced grids flow-accumulation algorithms are applied to describe the hydrologic and geomorphologic mass transport on the surface. In this contribution, we propose a stochastic point-cloud filtering that, together with a spatial bootstrap sampling, allows for a flow accumulation directly on point clouds using Facet-Flow Networks (FFN). Additionally, this provides a framework for the quantification of uncertainties in point-cloud derived metrics such as Specific Catchment Area (SCA) even though the flow accumulation itself is deterministic.}, language = {en} } @misc{HlepasKerstingKuhlmannetal.2018, author = {Hlepas, Nikos and Kersting, Norbert and Kuhlmann, Sabine and Swianiewicz, Pawel and Teles, Filipe}, title = {Introduction: Decentralization beyond the municipal tier}, series = {Sub-Municipal Governance in Europe}, journal = {Sub-Municipal Governance in Europe}, publisher = {Palgrave}, address = {Basingstoke}, isbn = {978-3-319-64725-8}, doi = {10.1007/978-3-319-64725-8_1}, pages = {1 -- 24}, year = {2018}, abstract = {In Europe, different countries developed a rich variety of sub-municipal institutions. Out of the plethora of intra- and sub-municipal decentralization forms (reaching from local outposts of city administration to "quasi-federal" structures), this book focuses on territorial sub-municipal units (SMUs) which combine multipurpose territorial responsibility with democratic legitimacy and can be seen as institutions promoting the articulation and realization of collective choices at a sub-municipal level. Country chapters follow a common pattern that is facilitating systematic comparisons, while at the same time leaving enough space for national peculiarities and priorities chosen and highlighted by the authors, who also take advantage of the eventually existing empirical surveys and case studies.}, language = {en} } @misc{BouckaertKuhlmann2018, author = {Bouckaert, Geert and Kuhlmann, Sabine}, title = {Foreword}, series = {Sub-Municipal Governance in Europe: Decentralization Beyond the Municipal Tier}, journal = {Sub-Municipal Governance in Europe: Decentralization Beyond the Municipal Tier}, publisher = {Palgrave}, address = {Basingstoke}, isbn = {978-3-319-64725-8}, pages = {V -- VI}, year = {2018}, language = {en} } @misc{SchneiderShigeyamaKovacsetal.2018, author = {Schneider, Oliver and Shigeyama, Jotaro and Kovacs, Robert and Roumen, Thijs Jan and Marwecki, Sebastian and B{\"o}ckhoff, Nico and Gl{\"o}ckner, Daniel Amadeus Johannes and Bounama, Jonas and Baudisch, Patrick}, title = {DualPanto}, series = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, journal = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, publisher = {Association for Computing Machinery}, address = {New York}, isbn = {978-1-4503-5948-1}, doi = {10.1145/3242587.3242604}, pages = {877 -- 887}, year = {2018}, abstract = {We present a new haptic device that enables blind users to continuously track the absolute position of moving objects in spatial virtual environments, as is the case in sports or shooter games. Users interact with DualPanto by operating the me handle with one hand and by holding on to the it handle with the other hand. Each handle is connected to a pantograph haptic input/output device. The key feature is that the two handles are spatially registered with respect to each other. When guiding their avatar through a virtual world using the me handle, spatial registration enables users to track moving objects by having the device guide the output hand. This allows blind players of a 1-on-1 soccer game to race for the ball or evade an opponent; it allows blind players of a shooter game to aim at an opponent and dodge shots. In our user study, blind participants reported very high enjoyment when using the device to play (6.5/7).}, language = {en} } @misc{KovacsIonLopesetal.2018, author = {Kovacs, Robert and Ion, Alexandra and Lopes, Pedro and Oesterreich, Tim and Filter, Johannes and Otto, Philip and Arndt, Tobias and Ring, Nico and Witte, Melvin and Synytsia, Anton and Baudisch, Patrick}, title = {TrussFormer}, series = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, journal = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, publisher = {Association for Computing Machinery}, address = {New York}, isbn = {978-1-4503-5948-1}, doi = {10.1145/3242587.3242607}, pages = {113 -- 125}, year = {2018}, abstract = {We present TrussFormer, an integrated end-to-end system that allows users to 3D print large-scale kinetic structures, i.e., structures that involve motion and deal with dynamic forces. TrussFormer builds on TrussFab, from which it inherits the ability to create static large-scale truss structures from 3D printed connectors and PET bottles. TrussFormer adds movement to these structures by placing linear actuators into them: either manually, wrapped in reusable components called assets, or by demonstrating the intended movement. TrussFormer verifies that the resulting structure is mechanically sound and will withstand the dynamic forces resulting from the motion. To fabricate the design, TrussFormer generates the underlying hinge system that can be printed on standard desktop 3D printers. We demonstrate TrussFormer with several example objects, including a 6-legged walking robot and a 4m-tall animatronics dinosaur with 5 degrees of freedom.}, language = {en} } @misc{MarweckiBaudisch2018, author = {Marwecki, Sebastian and Baudisch, Patrick}, title = {Scenograph}, series = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, journal = {UIST '18: Proceedings of the 31st Annual ACM Symposium on User Interface Software and Technology}, publisher = {Association for Computing Machinery}, address = {New York}, isbn = {978-1-4503-5948-1}, doi = {10.1145/3242587.3242648}, pages = {511 -- 520}, year = {2018}, abstract = {When developing a real-walking virtual reality experience, designers generally create virtual locations to fit a specific tracking volume. Unfortunately, this prevents the resulting experience from running on a smaller or differently shaped tracking volume. To address this, we present a software system called Scenograph. The core of Scenograph is a tracking volume-independent representation of real-walking experiences. Scenograph instantiates the experience to a tracking volume of given size and shape by splitting the locations into smaller ones while maintaining narrative structure. In our user study, participants' ratings of realism decreased significantly when existing techniques were used to map a 25m2 experience to 9m2 and an L-shaped 8m2 tracking volume. In contrast, ratings did not differ when Scenograph was used to instantiate the experience.}, language = {en} } @misc{RazzaqKaminskiRomeroetal.2018, author = {Razzaq, Misbah and Kaminski, Roland and Romero, Javier and Schaub, Torsten H. and Bourdon, Jeremie and Guziolowski, Carito}, title = {Computing diverse boolean networks from phosphoproteomic time series data}, series = {Computational Methods in Systems Biology}, volume = {11095}, journal = {Computational Methods in Systems Biology}, publisher = {Springer}, address = {Berlin}, isbn = {978-3-319-99429-1}, issn = {0302-9743}, doi = {10.1007/978-3-319-99429-1_4}, pages = {59 -- 74}, year = {2018}, abstract = {Logical modeling has been widely used to understand and expand the knowledge about protein interactions among different pathways. Realizing this, the caspo-ts system has been proposed recently to learn logical models from time series data. It uses Answer Set Programming to enumerate Boolean Networks (BNs) given prior knowledge networks and phosphoproteomic time series data. In the resulting sequence of solutions, similar BNs are typically clustered together. This can be problematic for large scale problems where we cannot explore the whole solution space in reasonable time. Our approach extends the caspo-ts system to cope with the important use case of finding diverse solutions of a problem with a large number of solutions. We first present the algorithm for finding diverse solutions and then we demonstrate the results of the proposed approach on two different benchmark scenarios in systems biology: (1) an artificial dataset to model TCR signaling and (2) the HPN-DREAM challenge dataset to model breast cancer cell lines.}, language = {en} } @misc{LehmannBinetFranzetal.2018, author = {Lehmann, Frederike and Binet, Silvia and Franz, Alexandra and Taubert, Andreas and Schorr, Susan}, title = {Cation and anion substitutions in hybrid perovskites}, series = {7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC \& 34th EU PVSEC)}, journal = {7th World Conference on Photovoltaic Energy Conversion (WCPEC) (A Joint Conference of 45th IEEE PVSC, 28th PVSEC \& 34th EU PVSEC)}, publisher = {IEEE}, address = {New York}, isbn = {978-1-5386-8529-7}, issn = {2159-2330}, doi = {10.1109/PVSC.2018.8547645}, pages = {1555 -- 1558}, year = {2018}, abstract = {Organic or inorganic (A) metal (M) halide (X) perovskites (AMX(3)) are semiconductor materials setting the basis for the development of highly efficient, low-cost and multijunction solar energy conversion devices. The best efficiencies nowadays are obtained with mixed compositions containing methylammonium, formamidinium, Cs and Rb as well as iodine, bromine and chlorine as anions. The understanding of fundamental properties such as crystal structure and its effect on the band gap, as well as their phase stability is essential. In this systematic study X-ray diffraction and photoluminescense spectroscopy were applied to evaluate structural and optoelectronic properties of hybrid perovskites with mixed compositions.}, language = {en} } @misc{HermanussenSchefflerGrothetal.2018, author = {Hermanussen, Michael and Scheffler, Christiane and Groth, Detlef and Bogin, Barry}, title = {Perceiving stunting - Student research and the "Lieschen Muller effect" in nutrition science}, series = {Journal of biological and clinical anthropology : Anthropologischer Anzeiger ; Mitteilungsorgan der Gesellschaft f{\"u}r Anthropologie}, volume = {74}, journal = {Journal of biological and clinical anthropology : Anthropologischer Anzeiger ; Mitteilungsorgan der Gesellschaft f{\"u}r Anthropologie}, number = {5}, publisher = {Schweizerbart}, address = {Stuttgart}, issn = {0003-5548}, doi = {10.1127/anthranz/2018/0858}, pages = {355 -- 358}, year = {2018}, language = {en} } @misc{KampmannBrechenmacher2018, author = {Kampmann, Christoph and Brechenmacher, Thomas}, title = {Konrad Repgen (1923-2017)}, series = {Historisches Jahrbuch}, volume = {138}, journal = {Historisches Jahrbuch}, publisher = {Alber}, address = {M{\"u}nchen}, isbn = {978-3-451-38316-8}, issn = {0018-2621}, pages = {451 -- 464}, year = {2018}, language = {de} } @misc{BalazadehMuellerRoeber2018, author = {Balazadeh, Salma and M{\"u}ller-R{\"o}ber, Bernd}, title = {A balance to death}, series = {Nature plants}, volume = {4}, journal = {Nature plants}, number = {11}, publisher = {Nature Publ. Group}, address = {London}, issn = {2055-026X}, doi = {10.1038/s41477-018-0279-6}, pages = {863 -- 864}, year = {2018}, abstract = {Leaf senescence plays a crucial role in nutrient recovery in late-stage plant development and requires vast transcriptional reprogramming by transcription factors such as ORESARA1 (ORE1). A proteolytic mechanism is now found to control ORE1 degradation, and thus senescence, during nitrogen starvation.}, language = {en} }