@misc{BanerjeeSaalfrank2013,
  author    = {Banerjee, Shiladitya and Saalfrank, Peter},
  title     = {Vibrationally resolved absorption, emission and resonance Raman spectra of diamondoids},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94542},
  pages     = {144 -- 158},
  year      = {2013},
  abstract  = {The time-dependent approach to electronic spectroscopy, as popularized by Heller and coworkers in the 1980's, is applied here in conjunction with linear-response, time-dependent density functional theory to study vibronic absorption, emission and resonance Raman spectra of several diamondoids. Two-state models, the harmonic and the Condon approximations, are used for the calculations, making them easily applicable to larger molecules. The method is applied to nine pristine lower and higher diamondoids: adamantane, diamantane, triamantane, and three isomers each of tetramantane and pentamantane. We also consider a hybrid species "Dia = Dia" - a shorthand notation for a recently synthesized molecule comprising two diamantane units connected by a C[double bond, length as m-dash]C double bond. We resolve and interpret trends in optical and vibrational properties of these molecules as a function of their size, shape, and symmetry, as well as effects of "blending" with sp2-hybridized C-atoms. Time-dependent correlation functions facilitate the computations and shed light on the vibrational dynamics following electronic transitions.},
  language  = {en}
}
@phdthesis{Klaper2013,
  author    = {Klaper, Matthias},
  title     = {Untersuchungen zum intramolekularen Transfer von Singulettsauerstoff auf Acene und Alkene},
  address   = {Potsdam},
  pages     = {118, A65 S.},
  year      = {2013},
  language  = {de}
}
@article{SzatmariHeydenreichKochetal.2013,
  author    = {Szatmari, Istvan and Heydenreich, Matthias and Koch, Andreas and Fulop, Ferenc and Kleinpeter, Erich},
  title     = {Unexpected isomerization of new naphth[1,3]oxazino[2,3-a] isoquinolines in solution, studied by dynamic NMR and supported by theoretical DFT computations},
  series = {Tetrahedron},
  volume    = {69},
  journal   = {Tetrahedron},
  number    = {35},
  publisher = {Elsevier},
  address   = {Oxford},
  issn      = {0040-4020},
  doi       = {10.1016/j.tet.2013.06.094},
  pages     = {7455 -- 7465},
  year      = {2013},
  abstract  = {Through the reactions of 1-aminomethyl-2-naphthol and substituted 1-aminobenzyl-2-naphthols with 3,4-dihydroisoquinoline or 6,7-dimethoxy-3,4-dihydroisoquinoline under microwave conditions, naphth[1,2-e][1,3]oxazino[2,3-a]-isoquinoline derivatives were prepared in good yields. The latter reaction was extended by using 2-aminoarylmethyl-1-naphthols, leading to isomeric naphth-[2,1-e][1,3]oxazino[2,3-a] isoquinolines. Beside the detailed NMR spectroscopic and theoretical study of both stereochemistry and dynamic behaviour of these new conformational flexible heterocyclic ring systems an unexpected dynamic process between two diastereomers was observed in solution, studied by variable temperature H-1 NMR spectroscopy and the mechanism proved by theoretical DFT computations.},
  language  = {en}
}
@article{VanBelProostVanNesteetal.2013,
  author    = {Van Bel, Michiel and Proost, Sebastian and Van Neste, Christophe and Deforce, Dieter and Van de Peer, Yves and Vandepoele, Klaas},
  title     = {TRAPID - an efficient online tool for the functional and comparative analysis of de novo RNA-Seq transcriptomes},
  series = {Genome biology : biology for the post-genomic era},
  volume    = {14},
  journal   = {Genome biology : biology for the post-genomic era},
  number    = {12},
  publisher = {BioMed Central},
  address   = {London},
  issn      = {1465-6906},
  doi       = {10.1186/gb-2013-14-12-r134},
  pages     = {10},
  year      = {2013},
  abstract  = {Transcriptome analysis through next-generation sequencing technologies allows the generation of detailed gene catalogs for non-model species, at the cost of new challenges with regards to computational requirements and bioinformatics expertise. Here, we present TRAPID, an online tool for the fast and efficient processing of assembled RNA-Seq transcriptome data, developed to mitigate these challenges. TRAPID offers high-throughput open reading frame detection, frameshift correction and includes a functional, comparative and phylogenetic toolbox, making use of 175 reference proteomes. Benchmarking and comparison against state-of-the-art transcript analysis tools reveals the efficiency and unique features of the TRAPID system.},
  language  = {en}
}
@article{DraudeGallaPelsteretal.2013,
  author    = {Draude, F. and Galla, S. and Pelster, Axel and Tentschert, J. and Jungnickel, H. and Haase, Alfred and Mantion, Alexandre and Thuenemann, Andreas F. and Taubert, Andreas and Luch, A. and Arlinghaus, H. F.},
  title     = {ToF-SIMS and Laser-SNMS analysis of macrophages after exposure to silver nanoparticles},
  series = {Surface and interface analysis : an international journal devoted to the development and application of techniques for the analysis surfaces, interfaces and thin films},
  volume    = {45},
  journal   = {Surface and interface analysis : an international journal devoted to the development and application of techniques for the analysis surfaces, interfaces and thin films},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {0142-2421},
  doi       = {10.1002/sia.4902},
  pages     = {286 -- 289},
  year      = {2013},
  abstract  = {Silver nanoparticles (SNPs) are among the most commercialized nanoparticles because of their antibacterial effects. Besides being employed, e. g. as a coatingmaterial for sterile surfaces in household articles and appliances, the particles are also used in a broad range of medical applications. Their antibacterial properties make SNPs especially useful for wound disinfection or as a coating material for prostheses and surgical instruments. Because of their optical characteristics, the particles are of increasing interest in biodetection as well. Despite the widespread use of SNPs, there is little knowledge of their toxicity. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and laser post-ionization secondary neutral mass spectrometry (Laser-SNMS) were used to investigate the effects of SNPs on human macrophages derived from THP-1 cells in vitro. For this purpose, macrophages were exposed to SNPs. The SNP concentration ranges were chosen with regard to functional impairments of the macrophages. To optimize the analysis of the macrophages, a special silicon wafer sandwich preparation technique was employed; ToF-SIMS was employed to characterize fragments originating from macrophage cell membranes. With the use of this optimized sample preparation method, the SNP-exposed macrophages were analyzed with ToF-SIMS and with Laser-SNMS. With Laser-SNMS, the three-dimensional distribution of SNPs in cells could be readily detected with very high efficiency, sensitivity, and submicron lateral resolution. We found an accumulation of SNPs directly beneath the cell membrane in a nanoparticular state as well as agglomerations of SNPs inside the cells.},
  language  = {en}
}
@article{TentschertDraudeJungnickeletal.2013,
  author    = {Tentschert, J. and Draude, F. and Jungnickel, H. and Haase, A. and Mantion, Alexandre and Galla, S. and Thuenemann, Andreas F. and Taubert, Andreas and Luch, A. and Arlinghaus, H. F.},
  title     = {TOF-SIMS analysis of cell membrane changes in functional impaired human macrophages upon nanosilver treatment},
  series = {Surface and interface analysis : an international journal devoted to the development and application of techniques for the analysis surfaces, interfaces and thin films},
  volume    = {45},
  journal   = {Surface and interface analysis : an international journal devoted to the development and application of techniques for the analysis surfaces, interfaces and thin films},
  number    = {1},
  publisher = {Wiley-Blackwell},
  address   = {Hoboken},
  issn      = {0142-2421},
  doi       = {10.1002/sia.5155},
  pages     = {483 -- 485},
  year      = {2013},
  abstract  = {Silver nanoparticles (SNP) are among the most commercialized nanoparticles. Here, we show that peptide-coated SNP cause functional impairment of human macrophages. A dose-dependent inhibition of phagocytosis is observed after nanoparticle treatment, and pretreatment of cells with N-acetyl cysteine (NAC) can counteract the phagocytosis disturbances caused by SNP. Using the surface-sensitive mode of time-of-flight secondary ion mass spectrometry, in combination with multivariate statistical methods, we studied the composition of cell membranes in human macrophages upon exposure to SNP with and without NAC preconditioning. This method revealed characteristic changes in the lipid pattern of the cellular membrane outer leaflet in those cells challenged by SNP. Statistical analyses resulted in 19 characteristic ions, which can be used to distinguish between NAC pretreated and untreated macrophages. The present study discusses the assignments of surface cell membrane phospholipids for the identified ions and the resulting changes in the phospholipid pattern of treated cells. We conclude that the adverse effects in human macrophages caused by SNP can be partially reversed through NAC administration. Some alterations, however, remained.},
  language  = {en}
}
@phdthesis{Rohrmann2013,
  author    = {Rohrmann, Johannes},
  title     = {The transcription factors orchestra of ripening tomato fruits},
  address   = {Potsdam},
  pages     = {Ix, 136 S. + 1 CD-Rom},
  year      = {2013},
  language  = {en}
}
@article{ZhongAdelsbergerNiedermeieretal.2013,
  author    = {Zhong, Qi and Adelsberger, Joseph and Niedermeier, M. A. and Golosova, Anastasi and Bivigou Koumba, Achille Mayelle and Laschewsky, Andr{\´e} and Funari, S. S. and Papadakis, Christine M. and M{\"u}ller-Buschbaum, Peter},
  title     = {The influence of selective solvents on the transition behavior of poly(styrene-b-monomethoxydiethylenglycol-acrylate-b-styrene) thick films},
  series = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft},
  volume    = {291},
  journal   = {Colloid and polymer science : official journal of the Kolloid-Gesellschaft},
  number    = {6},
  publisher = {Springer},
  address   = {New York},
  issn      = {0303-402X},
  doi       = {10.1007/s00396-012-2879-4},
  pages     = {1439 -- 1451},
  year      = {2013},
  abstract  = {Thick poly(styrene-b-monomethoxydiethylenglycol-acrylate-b-styrene) [P(S-b-MDEGA-b-S)] films (thickness 5 mu m) are prepared from different solvents on flexible substrates by solution casting and investigated with small-angle X-ray scattering. As the solvents are either PS- or PMDEGA-selective, micelles with different core-shell micellar structures are formed. In PMDEGA-selective solvents, the PS block is the core and PMDEGA is the shell, whereas in PS-selective solvents, the order is reversed. After exposing the films to liquid D2O, the micellar structure inside the films prepared from PMDEGA-selective solvents remains unchanged and only the PMDEGA (shell part) swells. On the contrary, in the films prepared from PS-selective solvents, the micelles revert the core and the shell. This reversal causes more entanglements of the PMDEGA chains between the micelles. Moreover, the thermal collapse transition of the PMDEGA block in liquid D2O is significantly broadened. Irrespective of the solvent used for film preparation, the swollen PMDEGA shell does not show a prominent shrinkage when passing the phase transition, and the transition process occurs via compaction. The collapsed micelles have a tendency to densely pack above the transition temperature.},
  language  = {en}
}
@article{CodorniuHernandezBoeseKusalik2013,
  author    = {Codorniu-Hernandez, Edelsys and Boese, Adrian Daniel and Kusalik, Peter G.},
  title     = {The hemibond as an alternative condensed phase structure for the hydroxyl radical},
  series = {Canadian journal of chemistry = Revue canadienne de chimie},
  volume    = {91},
  journal   = {Canadian journal of chemistry = Revue canadienne de chimie},
  number    = {7},
  publisher = {NRC Research Press},
  address   = {Ottawa},
  issn      = {0008-4042},
  doi       = {10.1139/cjc-2012-0520},
  pages     = {544 -- 551},
  year      = {2013},
  abstract  = {Despite the critical importance of the hydroxyl radical in major scientific fields, there are still open questions on the behavior of this species in the aqueous phase. In particular, there has been much debate on the existence of a hemibonded interaction between the hydroxyl radical and water molecules. While some reports indicate that the hemibonded radical might explain some experimental data, others have claimed that this interaction is simply a density functional theory (DFT) artifact. Here, we provide results from high level (basis set limit of coupled-cluster levels up to single, double, triple excitations (CCSD(T)) and beyond) ab initio calculations of different OH center dot(H2O)(n) clusters in the gas phase to accurately explore the existence of the hemibonded interaction and its energy difference with respect to other well-defined hydrogen bond interactions. Additional comparisons with second order perturbation theory (MP2) and DFT are also presented. Constrained molecular dynamics was applied to determine the free energy for the formation/disruption and ice systems. Overall, our findings confirm that the hemibond can be an alternative structure for the hydroxyl radical in the condensed phase when the formation of hydrogen bonds is impeded. These results will aid the understanding of theoretical and experimental data and help future experimental designs for the detection of this important species.},
  language  = {en}
}
@misc{WinterThielZabeletal.2013,
  author    = {Winter, Alette and Thiel, Kerstin and Zabel, Andr{\´e} and Klamroth, Tillmann and P{\"o}ppl, Andreas and Kelling, Alexandra and Schilde, Uwe and Taubert, Andreas and Strauch, Peter},
  title     = {Tetrahalidocuprates(II) - structure and EPR spectroscopy},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95012},
  pages     = {1019 -- 1030},
  year      = {2013},
  abstract  = {We present and discuss the results of crystallographic and electron paramagnetic resonance (EPR) spectroscopic analyses of five tetrachloridocuprate(II) complexes to supply a useful tool for the structural characterisation of the [CuCl4]2- moiety in the liquid state, for example in ionic liquids, or in solution. Bis(benzyltriethylammonium)-, bis(trimethylphenylammonium)-, bis(ethyltriphenylphosphonium)-, bis(benzyltriphenylphosphonium)-, and bis(tetraphenylarsonium)tetrachloridocuprate(II) were synthesised and characterised by elemental, IR, EPR and X-ray analyses. The results of the crystallographic analyses show distorted tetrahedral coordination geometry of all [CuCl4]2- anions in the five complexes and prove that all investigated complexes are stabilised by hydrogen bonds of different intensities. Despite the use of sterically demanding ammonium, phosphonium and arsonium cations to obtain the separation of the paramagnetic Cu(II) centres for EPR spectroscopy no hyperfine structure was observed in the EPR spectra but the principal values of the electron Zeeman tensor, g∥ and g⊥, could be determined. With these EPR data and the crystallographic parameters we were able to carry out a correlation study to anticipate the structural situation of tetrachloridocuprates in different physical states. This correlation is in good agreement with DFT calculations.},
  language  = {en}
}
@phdthesis{Winter2013,
  author    = {Winter, Alette},
  title     = {Tetrahalidocuprat(II)-komplexe : Untersuchungen zur Relation von Struktur- und EPR-Parametern},
  address   = {Potsdam},
  pages     = {XVII, 103, LVII S.},
  year      = {2013},
  language  = {de}
}
@misc{MondalBhuniaDemeshkoetal.2013,
  author    = {Mondal, Suvendu Sekhar and Bhunia, Asamanjoy and Demeshko, Serhiy and Kelling, Alexandra and Schilde, Uwe and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Synthesis of a Co(II)-imidazolate framework from an anionic linker precursor},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94424},
  pages     = {39 -- 42},
  year      = {2013},
  abstract  = {A Co(II)-imidazolate-4-amide-5-imidate based MOF, IFP-5, is synthesized by using an imidazolate anion-based novel ionic liquid as a linker precursor under solvothermal conditions. IFP-5 shows significant amounts of gas (N2, CO2, CH4 and H2) uptake capacities. IFP-5 exhibits an independent high spin Co(II) centre and antiferromagnetic coupling.},
  language  = {en}
}
@article{TechenCzaplaMoellnitzetal.2013,
  author    = {Techen, Anne and Czapla, Sylvia and M{\"o}llnitz, Kristian and Budach, Dennis B. and Wessig, Pablo and Kumke, Michael Uwe},
  title     = {Synthesis and spectroscopic characterization of fluorophore-labeled oligospiroketal rods},
  series = {Helvetica chimica acta},
  volume    = {96},
  journal   = {Helvetica chimica acta},
  number    = {11},
  publisher = {Wiley-VCH},
  address   = {Weinheim},
  issn      = {0018-019X},
  doi       = {10.1002/hlca.201200616},
  pages     = {2046 -- 2067},
  year      = {2013},
  abstract  = {Fluorescence probes consisting of well-established fluorophores in combination with rigid molecular rods based on spirane-type structures were investigated with respect to their fluorescence properties under different solvent conditions. The attachment of the dyes was accomplished by 1,3-dipolar cycloaddition between alkynes and azides (click' reaction) and is a prime example for a novel class of sensor constructs. Especially, the attachment of two (different) fluorophores on opposite sides of the molecular rods paves the way to new sensor systems with less bulky (compared to the conventional DNA- or protein-based concepts), nevertheless rigid spacer constructs, e.g., for FRET-based sensing applications. A detailed photophysical characterization was performed in MeOH (and in basic H2O/MeOH mixtures) for i) rod constructs containing carboxyfluorescein, ii) rod constructs containing carboxyrhodamine, iii) rod constructs containing both carboxyfluorescein and carboxyrhodamine, and iv) rod constructs containing both pyrene and perylene parts. For each dye (pair), two rod lengths with different numbers of spirane units were synthesized and investigated. The rod constructs were characterized in ensemble as well as single-molecule fluorescence experiments with respect to i) specific roddye and ii) dyedye interactions. In addition to MeOH and MeOH/NaOH, the rod constructs were also investigated in micellar systems, which were chosen as a simplified model for membranes.},
  language  = {en}
}
@misc{Metzke2013,
  type      = {Master Thesis},
  author    = {Metzke, Sarah},
  title     = {Synthesis and characterization of transition metal nitrides and carbides for catalysis and electrochemistry application},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69835},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {It was the goal of this work to explore two different synthesis pathways using green chemistry. The first part of this thesis is focusing on the use of the urea-glass route towards single phase manganese nitride and manganese nitride/oxide nano-composites embedded in carbon, while the second part of the thesis is focusing on the use of the "saccharide route" (namely cellulose, sucrose, glucose and lignin) towards metal (Ni0), metal alloy (Pd0.9Ni0.1, Pd0.5Ni0.5, Fe0.5Ni0.5, Cu0.5Ni0.5 and W0.15Ni0.85) and ternary carbide (Mn0.75Fe2.25C) nanoparticles embedded in carbon. In the interest of battery application, MnN0.43 nanoparticles surrounded by a graphitic shell and embedded in carbon with a high surface area (79 m^2/g) were synthesized, following a previously set route.The comparison of the material characteristics before and after the discharge showed no remarkable difference in terms of composition and just slight differences in the morphological point of view, meaning the particles are stable but agglomerate. The graphitic shell is contributing to the resistance of the material and leads to a fine cyclic stability over 140 cycles of 230 mAh/g after the first charge/discharge and coulombic efficiencies close to 100\%. Due to the low voltage towards Li/Li+ and the low polarization, it might be an attractive anode material for lithium ion batteries. However, the capacity is still noticeably lower than the theoretical value for MnN0.43. A mixture of MnN0.43 and MnO nanoparticles embedded in carbon (surface area 93 m^2/g) was able to improve the cyclic stability to over 160 cycles giving a capacity of 811 mAh/g, which is considerably higher than the capacity of the conventional material graphite (372 mAh/g). This nano-composite seems to agglomerate less during the process of discharge. Interestingly, although the capacity is much higher than of the single phase manganese nitride, the nano-composite seems to only contain MnN0.43 nanoparticles after the process of discharge with no oxide phase to be found. Concerning catalysis application, different metal, metal alloy, and metal carbide nanoparticles were synthesized using the saccharide route. At first, systems that were already investigated before, being Pd0.9Ni0.1, Pd0.5Ni0.5, Fe0.5Ni0.5 and Mn0.75Fe2.25C using cellulose as the carbon source were prepared and tested in an alkylation reaction of toluene with benzylchloride. Unexpectedly, the metal alloys did not show any catalytic activity, but the ternary carbide Mn0.75Fe2.25C showed fine catalytic activity of 98\% conversion after 9 hour reaction time (110 °C). In a second step, the saccharide route was modified towards other carbon sources and carbon to metal ratios in order to improve the homogeneity of the samples and accessibility of the particle surfaces. The used carbon sources sucrose and glucose are similar in their basic structure of carbohydrates, but reducing the (polymeric) chain length. Indeed, the cellulose could be successfully replaced by sucrose and glucose. A lower carbon to metal ratio was found to influence the size, homogeneity and accessibility (as evidenced by TEM) of the samples. Since sucrose is an aliment, glucose is the better choice as a carbon source. Using glucose, the synthesis of Cu0.5Ni0.5 and W0.15Ni0.85 nano-composites was also possible, although the later was never obtained as pure phase. These alloy nano-composites were tested, along with nickel0 nanoparticles also prepared with glucose and on their catalytic activity towards the reduction of phenylacetylene. The results obtained let believe that any (poly) saccharide, including lignin, could be used as carbon source. The nickel0 nano-composites prepared with lignin as a carbon source were tested along with those prepared with cellulose and sucrose for their catalytic activity in the transfer hydrogenation of nitrobenzene (results compared with exposed nickel nanoparticles and nickel supported on carbon) leading to very promising results. Based on the urea-glass route and the saccharide route, simple equipment and transition metals, it was possible to have a one-pot synthesize with scale-up possibilities towards new material that can be applied in catalysis and battery systems.},
  language  = {en}
}
@phdthesis{Santan2013,
  author    = {Santan, Harshal Diliprao},
  title     = {Synthesis and characterization of thermosensitive hydrogels derived from polysaccharides},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-69793},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {In this work, thermosensitive hydrogels having tunable thermo-mechanical properties were synthesized. Generally the thermal transition of thermosensitive hydrogels is based on either a lower critical solution temperature (LCST) or critical micelle concentration/ temperature (CMC/ CMT). The temperature dependent transition from sol to gel with large volume change may be seen in the former type of thermosensitive hydrogels and is negligible in CMC/ CMT dependent systems. The change in volume leads to exclusion of water molecules, resulting in shrinking and stiffening of system above the transition temperature. The volume change can be undesired when cells are to be incorporated in the system. The gelation in the latter case is mainly driven by micelle formation above the transition temperature and further colloidal packing of micelles around the gelation temperature. As the gelation mainly depends on concentration of polymer, such a system could undergo fast dissolution upon addition of solvent. Here, it was envisioned to realize a thermosensitive gel based on two components, one responsible for a change in mechanical properties by formation of reversible netpoints upon heating without volume change, and second component conferring degradability on demand. As first component, an ABA triblockcopolymer (here: Poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEPE) with thermosensitive properties, whose sol-gel transition on the molecular level is based on micellization and colloidal jamming of the formed micelles was chosen, while for the additional macromolecular component crosslinking the formed micelles biopolymers were employed. The synthesis of the hydrogels was performed in two ways, either by physical mixing of compounds showing electrostatic interactions, or by covalent coupling of the components. Biopolymers (here: the polysaccharides hyaluronic acid, chondroitin sulphate, or pectin, as well as the protein gelatin) were employed as additional macromolecular crosslinker to simultaneously incorporate an enzyme responsiveness into the systems. In order to have strong ionic/electrostatic interactions between PEPE and polysaccharides, PEPE was aminated to yield predominantly mono- or di-substituted PEPEs. The systems based on aminated PEPE physically mixed with HA showed an enhancement in the mechanical properties such as, elastic modulus (G′) and viscous modulus (G′′) and a decrease of the gelation temperature (Tgel) compared to the PEPE at same concentration. Furthermore, by varying the amount of aminated PEPE in the composition, the Tgel of the system could be tailored to 27-36 °C. The physical mixtures of HA with di-amino PEPE (HA·di-PEPE) showed higher elastic moduli G′ and stability towards dissolution compared to the physical mixtures of HA with mono-amino PEPE (HA·mono-PEPE). This indicates a strong influence of electrostatic interaction between -COOH groups of HA and -NH2 groups of PEPE. The physical properties of HA with di-amino PEPE (HA·di-PEPE) compare beneficially with the physical properties of the human vitreous body, the systems are highly transparent, and have a comparable refractive index and viscosity. Therefore,this material was tested for a potential biological application and was shown to be non-cytotoxic in eluate and direct contact tests. The materials will in the future be investigated in further studies as vitreous body substitutes. In addition, enzymatic degradation of these hydrogels was performed using hyaluronidase to specifically degrade the HA. During the degradation of these hydrogels, increase in the Tgel was observed along with decrease in the mechanical properties. The aminated PEPE were further utilised in the covalent coupling to Pectin and chondroitin sulphate by using EDC as a coupling agent. Here, it was possible to adjust the Tgel (28-33 °C) by varying the grafting density of PEPE to the biopolymer. The grafting of PEPE to Pectin enhanced the thermal stability of the hydrogel. The Pec-g-PEPE hydrogels were degradable by enzymes with slight increase in Tgel and decrease in G′ during the degradation time. The covalent coupling of aminated PEPE to HA was performed by DMTMM as a coupling agent. This method of coupling was observed to be more efficient compared to EDC mediated coupling. Moreover, the purification of the final product was performed by ultrafiltration technique, which efficiently removed the unreacted PEPE from the final product, which was not sufficiently achieved by dialysis. Interestingly, the final products of these reaction were in a gel state and showed enhancement in the mechanical properties at very low concentrations (2.5 wt\%) near body temperature. In these hydrogels the resulting increase in mechanical properties was due to the combined effect of micelle packing (physical interactions) by PEPE and covalent netpoints between PEPE and HA. PEPE alone or the physical mixtures of the same components were not able to show thermosensitive behavior at concentrations below 16 wt\%. These thermosensitive hydrogels also showed on demand solubilisation by enzymatic degradation. The concept of thermosensitivity was introduced to 3D architectured porous hydrogels, by covalently grafting the PEPE to gelatin and crosslinking with LDI as a crosslinker. Here, the grafted PEPE resulted in a decrease in the helix formation in gelatin chains and after fixing the gelatin chains by crosslinking, the system showed an enhancement in the mechanical properties upon heating (34-42 °C) which was reversible upon cooling. A possible explanation of the reversible changes in mechanical properties is the strong physical interactions between micelles formed by PEPE being covalently linked to gelatin. Above the transition temperature, the local properties were evaluated by AFM indentation of pore walls in which an increase in elastic modulus (E) at higher temperature (37 °C) was observed. The water uptake of these thermosensitive architectured porous hydrogels was also influenced by PEPE and temperature (25 °C and 37 °C), showing lower water up take at higher temperature and vice versa. In addition, due to the lower water uptake at high temperature, the rate of hydrolytic degradation of these systems was found to be decreased when compared to pure gelatin architectured porous hydrogels. Such temperature sensitive architectured porous hydrogels could be important for e.g. stem cell culturing, cell differentiation and guided cell migration, etc. Altogether, it was possible to demonstrate that the crosslinking of micelles by a macromolecular crosslinker increased the shear moduli, viscosity, and stability towards dissolution of CMC-based gels. This effect could be likewise be realized by covalent or non-covalent mechanisms such as, micelle interactions, physical interactions of gelatin chains and physical interactions between gelatin chains and micelles. Moreover, the covalent grafting of PEPE will create additional net-points which also influence the mechanical properties of thermosensitive architectured porous hydrogels. Overall, the physical and chemical interactions and reversible physical interactions in such thermosensitive architectured porous hydrogels gave a control over the mechanical properties of such complex system. The hydrogels showing change of mechanical properties without a sol-gel transition or volume change are especially interesting for further study with cell proliferation and differentiation.},
  language  = {en}
}
@misc{MondalDeyBaburinetal.2013,
  author    = {Mondal, Suvendu Sekhar and Dey, Subarna and Baburin, Igor A. and Kelling, Alexandra and Schilde, Uwe and Seifert, Gotthard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Syntheses of two imidazolate-4-amide-5-imidate linker-based hexagonal metal-organic frameworks with flexible ethoxy substituent},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-94360},
  pages     = {9394 -- 9399},
  year      = {2013},
  abstract  = {A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.},
  language  = {en}
}
@article{MondalDeyBaburinetal.2013,
  author    = {Mondal, Suvendu Sekhar and Dey, Subarna and Baburin, Igor A. and Kelling, Alexandra and Schilde, Uwe and Seifert, Gotthard and Janiak, Christoph and Holdt, Hans-J{\"u}rgen},
  title     = {Syntheses of two imidazolate-4-amide-5-imidate linker-based hexagonal metal-organic frameworks with flexible ethoxy substituent},
  series = {CrystEngComm},
  volume    = {15},
  journal   = {CrystEngComm},
  number    = {45},
  publisher = {Royal Society of Chemistry},
  address   = {Cambridge},
  issn      = {1466-8033},
  doi       = {10.1039/c3ce41632a},
  pages     = {9394 -- 9399},
  year      = {2013},
  abstract  = {A rare example of in situ linker generation with the formation of soft porous Zn- and Co-MOFs (IFP-9 and -10, respectively) is reported. The flexible ethoxy groups of IFP-9 and -10 protrude into the 1D hexagonal channels. The gas-sorption behavior of both materials for H-2, CO2 and CH4 showed wide hysteretic isotherms, typical for MOFs having a flexible substituent which can give rise to a gate effect.},
  language  = {en}
}
@phdthesis{Winkler2013,
  author    = {Winkler, Henning},
  title     = {Synthese von thermoplastisch verarbeitbaren Fetts{\"a}ure-Acylderivaten der St{\"a}rke und Proteine},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-71089},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {In den vergangenen Jahren wurden stetig wachsende Produktionskapazit{\"a}ten von Biokunststoffen aus nachwachsenden Rohstoffe nverzeichnet. Trotz großer Produktionskapazit{\"a}ten und einem geeigneten Eigenschaftsprofil findet St{\"a}rke nur als hydrophile, mit Weichmachern verarbeitete thermoplastische St{\"a}rke (TPS) in Form von Blends mit z. B. Polyestern Anwendung. Gleiches gilt f{\"u}r Kunststoffe auf Proteinbasis. Die vorliegende Arbeit hat die Entwicklung von Biokunststoffen auf St{\"a}rkebasis zum Ziel, welche ohne externe Weichmacher thermoplastisch verarbeitbar und hydrophob sind sowie ein mechanisches Eigenschaftsprofil aufweisen, welches ein Potenzial zur Herstellung von Materialien f{\"u}r eine Anwendung als Verpackungsmittel bietet. Um die Rohstoffbasis f{\"u}r Biokunststoffe zu erweitern, soll das erarbeitete Konzept auf zwei industriell verf{\"u}gbare Proteintypen, Zein und Molkenproteinisolat (WPI), {\"u}bertragen werden. Als geeignete Materialklasse wurden Fetts{\"a}ureester der St{\"a}rke herausgearbeitet. Zun{\"a}chst fand ein Vergleich der S{\"a}urechlorid-Veresterung und der Umesterung von Fetts{\"a}urevinylestern statt, woraus letztere als geeignetere Methode hervorging. Durch Variation der Reaktionsparameter konnte diese optimiert und auf eine Serie der Fetts{\"a}urevinylester von Butanoat bis Stearat f{\"u}r DS-Werte bis zu 2,2-2,6 angewandt werden. M{\"o}glich war somit eine systematische Studie unter Variation der veresterten Fetts{\"a}ure sowie des Substitutionsgrades (DS). S{\"a}mtliche Produkte mit einem DS ab 1,5 wiesen eine ausgpr{\"a}gte L{\"o}slichkeit in organischen L{\"o}sungsmitteln auf wodurch sowohl die Aufnahme von NMR-Spektren als auch Molmassenbestimmung mittels Gr{\"o}ßenausschlusschromatographie mit gekoppelter Mehrwinkel-Laserlichtstreuung (GPC-MALLS) m{\"o}glich waren. Durch dynamische Lichtstreuung (DLS) wurde das L{\"o}slichkeitsverhalten veranschaulicht. S{\"a}mtliche Produkte konnten zu Filmen verarbeitet werden, wobei Materialien mit DS 1,5-1,7 hohe Zugfestigkeiten (bis zu 42 MPa) und Elastizit{\"a}tsmodule (bis 1390 MPa) aufwiesen. Insbesondere St{\"a}rkehexanoat mit DS <2 sowie St{\"a}rkebutanoat mit DS >2 hatten ein mechanisches Eigenschaftsprofil, welches insbesondere in Bezug auf die Festigkeit/Steifigkeit vergleichbar mit Verpackungsmaterialien wie Polyethylen war (Zugfestigkeit: 15-32 MPa, E-Modul: 300-1300 MPa). Zugfestigkeit und Elastizit{\"a}tsmodul nahmen mit steigender Kettenl{\"a}nge der veresterten Fetts{\"a}ure ab. Ester l{\"a}ngerkettiger Fetts{\"a}uren (C16-C18) waren spr{\"o}de. {\"U}ber Weitwinkel-R{\"o}ntgenstreuung (WAXS) und Infrarotspektroskopie (ATR-FTIR) konnte der Verlauf der Festigkeiten mit einer zunehmenden Distanz der St{\"a}rke im Material begr{\"u}ndet werden. Es konnten von DS und Kettenl{\"a}nge abh{\"a}ngige Glas{\"u}berg{\"a}nge detektiert werden, die kristallinen Strukturen der langkettigen Fetts{\"a}uren zeigten einen Schmelzpeak. Die Hydrophobie der Filme wurde anhand von Kontaktwinkeln >95° gegen Wasser dargestellt. Blends mit biobasierten Polyterpenen sowie den in der Arbeit hergestellten Zein-Acylderivaten erm{\"o}glichten eine weitere Verbesserung der Zugfestigkeit bzw. des Elastizit{\"a}tsmoduls hochsubstituierter Produkte. Eine thermoplastische Verarbeitung mittels Spritzgießen war sowohl f{\"u}r Produkte mit hohem als auch mittlerem DS-Wert ohne jeglichen Zusatz von Weichmachern m{\"o}glich. Es entstanden homogene, transparente Pr{\"u}fst{\"a}be. Untersuchungen der H{\"a}rte ergaben auch hier f{\"u}r St{\"a}rkehexanoat und -butanoat mit Polyethylen vergleichbare Werte. Ausgew{\"a}hlte Produkte wurden zu Fasern nach dem Schmelzspinnverfahren verarbeitet. Hierbei wurden insbesondere f{\"u}r hochsubstituierte Derivate homogenen Fasern erstellt, welche im Vergleich zur Gießfolie signifikant h{\"o}here Zugfestigkeiten aufwiesen. St{\"a}rkeester mit mittlerem DS ließen sich ebenfalls verarbeiten. Zun{\"a}chst wurden f{\"u}r eine {\"U}bertragung des Konzeptes auf die Proteine Zein und WPI verschiedene Synthesemethoden verglichen. Die Veresterung mit S{\"a}urechloriden ergab hierbei die h{\"o}chsten Werte. Im Hinblick auf eine gute L{\"o}slichkeit in organischen L{\"o}sungsmitteln wurde f{\"u}r WPI die Veresterung mit carbonyldiimidazol (CDI)-aktivierten Fetts{\"a}uren in DMSO und f{\"u}r Zein die Veresterung mit S{\"a}u-rechloriden in Pyridin bevorzugt. Es stellte sich heraus, dass acyliertes WPI zwar hydrophob, jedoch ohne Weichmacher nicht thermoplastisch verarbeitet werden konnte. Die Erstellung von Gießfolien f{\"u}hrte zu Spr{\"o}dbruchverhalten. Unter Zugabe der biobasierten {\"O}ls{\"a}ure wurde die Anwendung von acyliertem WPI als thermoplastischer Filler z. B. in Blends mit St{\"a}rkeestern dargestellt. Im Gegensatz hierzu zeigte acyliertes Zein Glas{\"u}berg{\"a}nge <100 °C bei ausreichender Stabilit{\"a}t (150-200 °C). Zeinoleat konnte ohne Weichmacher zu einer transparenten Gießfolie verarbeitet werden. S{\"a}mtliche Derivate erwiesen sich als ausgepr{\"a}gt hydrophob. Zeinoleat konnte {\"u}ber das Schmelzspinnverfahren zu thermoplastischen Fasern verarbeitet werden.},
  language  = {de}
}
@phdthesis{Greco2013,
  author    = {Greco, Tonino Lucio},
  title     = {Synthese von Halbleiter-Nanopartikeln zur Anwendung in Licht-ermittierenden Dioden},
  address   = {Potsdam},
  pages     = {158 S.},
  year      = {2013},
  language  = {de}
}
@phdthesis{Salert2013,
  author    = {Salert, Beatrice},
  title     = {Synthese und Charaterisierung phosphorszenter Seitenkettenpolymere f{\"u}r effiziente organische Leuchtdioden},
  address   = {Potsdam},
  pages     = {177 S.},
  year      = {2013},
  language  = {de}
}