@book{PolyvyanyyKuropka2007,
  author    = {Polyvyanyy, Artem and Kuropka, Dominik},
  title     = {A quantitative evaluation of the enhanced topic-based vector space model},
  isbn      = {978-3-939469-95-7},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33816},
  publisher      = {Universit{\"a}t Potsdam},
  year      = {2007},
  abstract  = {This contribution presents a quantitative evaluation procedure for Information Retrieval models and the results of this procedure applied on the enhanced Topic-based Vector Space Model (eTVSM). Since the eTVSM is an ontology-based model, its effectiveness heavily depends on the quality of the underlaying ontology. Therefore the model has been tested with different ontologies to evaluate the impact of those ontologies on the effectiveness of the eTVSM. On the highest level of abstraction, the following results have been observed during our evaluation: First, the theoretically deduced statement that the eTVSM has a similar effecitivity like the classic Vector Space Model if a trivial ontology (every term is a concept and it is independet of any other concepts) is used has been approved. Second, we were able to show that the effectiveness of the eTVSM raises if an ontology is used which is only able to resolve synonyms. We were able to derive such kind of ontology automatically from the WordNet ontology. Third, we observed that more powerful ontologies automatically derived from the WordNet, dramatically dropped the effectiveness of the eTVSM model even clearly below the effectiveness level of the Vector Space Model. Fourth, we were able to show that a manually created and optimized ontology is able to raise the effectiveness of the eTVSM to a level which is clearly above the best effectiveness levels we have found in the literature for the Latent Semantic Index model with compareable document sets.},
  language  = {en}
}
@inproceedings{FanMasuharaAotanietal.2010,
  author    = {Fan, Yang and Masuhara, Hidehiko and Aotani, Tomoyuki and Nielson, Flemming and Nielson, Hanne Riis},
  title     = {AspectKE*: Security aspects with program analysis for distributed systems},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41369},
  year      = {2010},
  abstract  = {Enforcing security policies to distributed systems is difficult, in particular, when a system contains untrusted components. We designed AspectKE*, a distributed AOP language based on a tuple space, to tackle this issue. In AspectKE*, aspects can enforce access control policies that depend on future behavior of running processes. One of the key language features is the predicates and functions that extract results of static program analysis, which are useful for defining security aspects that have to know about future behavior of a program. AspectKE* also provides a novel variable binding mechanism for pointcuts, so that pointcuts can uniformly specify join points based on both static and dynamic information about the program. Our implementation strategy performs fundamental static analysis at load-time, so as to retain runtime overheads minimal. We implemented a compiler for AspectKE*, and demonstrate usefulness of AspectKE* through a security aspect for a distributed chat system.},
  language  = {en}
}
@book{AdamBrehmerHuettenrauchetal.2006,
  author    = {Adam, Christian and Brehmer, Bastian and H{\"u}ttenrauch, Stefan and Jeske, Janin and Polze, Andreas and Rasche, Andreas and Sch{\"u}ler, Benjamin and Schult, Wolfgang},
  title     = {Aspektorientierte Programmierung : {\"U}berblick {\"u}ber Techniken und Werkzeuge},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-939469-23-0},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33796},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {88},
  year      = {2006},
  abstract  = {Inhaltsverzeichnis 1 Einf{\"u}hrung 2 Aspektorientierte Programmierung 2.1 Ein System als Menge von Eigenschaften 2.2 Aspekte 2.3 Aspektweber 2.4 Vorteile Aspektorientierter Programmierung 2.5 Kategorisierung der Techniken und Werkzeuge f ¨ ur Aspektorientierte Programmierung 3 Techniken und Werkzeuge zur Analyse Aspektorientierter Softwareprogramme 3.1 Virtual Source File 3.2 FEAT 3.3 JQuery 3.4 Aspect Mining Tool 4 Techniken und Werkzeuge zum Entwurf Aspektorientierter Softwareprogramme 4.1 Concern Space Modeling Schema 4.2 Modellierung von Aspekten mit UML 4.3 CoCompose 4.4 Codagen Architect 5 Techniken und Werkzeuge zur Implementierung Aspektorientierter Softwareprogramme 5.1 Statische Aspektweber 5.2 Dynamische Aspektweber 6 Zusammenfassung},
  language  = {de}
}
@phdthesis{Steinmetz2013,
  author    = {Steinmetz, Nadine},
  title     = {Context-aware semantic analysis of video metadata},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70551},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Im Vergleich zu einer stichwortbasierten Suche erm{\"o}glicht die semantische Suche ein pr{\"a}ziseres und anspruchsvolleres Durchsuchen von (Web)-Dokumenten, weil durch die explizite Semantik Mehrdeutigkeiten von nat{\"u}rlicher Sprache vermieden und semantische Beziehungen in das Suchergebnis einbezogen werden k{\"o}nnen. Eine semantische, Entit{\"a}ten-basierte Suche geht von einer Anfrage mit festgelegter Bedeutung aus und liefert nur Dokumente, die mit dieser Entit{\"a}t annotiert sind als Suchergebnis. Die wichtigste Voraussetzung f{\"u}r eine Entit{\"a}ten-zentrierte Suche stellt die Annotation der Dokumente im Archiv mit Entit{\"a}ten und Kategorien dar. Textuelle Informationen werden analysiert und mit den entsprechenden Entit{\"a}ten und Kategorien versehen, um den Inhalt semantisch erschließen zu k{\"o}nnen. Eine manuelle Annotation erfordert Dom{\"a}nenwissen und ist sehr zeitaufwendig. Die semantische Annotation von Videodokumenten erfordert besondere Aufmerksamkeit, da inhaltsbasierte Metadaten von Videos aus verschiedenen Quellen stammen, verschiedene Eigenschaften und Zuverl{\"a}ssigkeiten besitzen und daher nicht wie Fließtext behandelt werden k{\"o}nnen. Die vorliegende Arbeit stellt einen semantischen Analyseprozess f{\"u}r Video-Metadaten vor. Die Eigenschaften der verschiedenen Metadatentypen werden analysiert und ein Konfidenzwert ermittelt. Dieser Wert spiegelt die Korrektheit und die wahrscheinliche Mehrdeutigkeit eines Metadatums wieder. Beginnend mit dem Metadatum mit dem h{\"o}chsten Konfidenzwert wird der Analyseprozess innerhalb eines Kontexts in absteigender Reihenfolge des Konfidenzwerts durchgef{\"u}hrt. Die bereits analysierten Metadaten dienen als Referenzpunkt f{\"u}r die weiteren Analysen. So kann eine m{\"o}glichst korrekte Analyse der heterogen strukturierten Daten eines Kontexts sichergestellt werden. Am Ende der Analyse eines Metadatums wird die f{\"u}r den Kontext relevanteste Entit{\"a}t aus einer Liste von Kandidaten identifiziert - das Metadatum wird disambiguiert. Hierf{\"u}r wurden verschiedene Disambiguierungsalgorithmen entwickelt, die Beschreibungstexte und semantische Beziehungen der Entit{\"a}tenkandidaten zum gegebenen Kontext in Betracht ziehen. Der Kontext f{\"u}r die Disambiguierung wird f{\"u}r jedes Metadatum anhand der Eigenschaften und Konfidenzwerte zusammengestellt. Der vorgestellte Analyseprozess ist an zwei Hypothesen angelehnt: Um die Analyseergebnisse verbessern zu k{\"o}nnen, sollten die Metadaten eines Kontexts in absteigender Reihenfolge ihres Konfidenzwertes verarbeitet werden und die Kontextgrenzen von Videometadaten sollten durch Segmentgrenzen definiert werden, um m{\"o}glichst Kontexte mit koh{\"a}rentem Inhalt zu erhalten. Durch ausf{\"u}hrliche Evaluationen konnten die gestellten Hypothesen best{\"a}tigt werden. Der Analyseprozess wurden gegen mehrere State-of-the-Art Methoden verglichen und erzielt verbesserte Ergebnisse in Bezug auf Recall und Precision, besonders f{\"u}r Metadaten, die aus weniger zuverl{\"a}ssigen Quellen stammen. Der Analyseprozess ist Teil eines Videoanalyse-Frameworks und wurde bereits erfolgreich in verschiedenen Projekten eingesetzt.},
  language  = {en}
}
@phdthesis{Hebig2014,
  author    = {Hebig, Regina},
  title     = {Evolution of model-driven engineering settings in practice},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70761},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Nowadays, software systems are getting more and more complex. To tackle this challenge most diverse techniques, such as design patterns, service oriented architectures (SOA), software development processes, and model-driven engineering (MDE), are used to improve productivity, while time to market and quality of the products stay stable. Multiple of these techniques are used in parallel to profit from their benefits. While the use of sophisticated software development processes is standard, today, MDE is just adopted in practice. However, research has shown that the application of MDE is not always successful. It is not fully understood when advantages of MDE can be used and to what degree MDE can also be disadvantageous for productivity. Further, when combining different techniques that aim to affect the same factor (e.g. productivity) the question arises whether these techniques really complement each other or, in contrast, compensate their effects. Due to that, there is the concrete question how MDE and other techniques, such as software development process, are interrelated. Both aspects (advantages and disadvantages for productivity as well as the interrelation to other techniques) need to be understood to identify risks relating to the productivity impact of MDE. Before studying MDE's impact on productivity, it is necessary to investigate the range of validity that can be reached for the results. This includes two questions. First, there is the question whether MDE's impact on productivity is similar for all approaches of adopting MDE in practice. Second, there is the question whether MDE's impact on productivity for an approach of using MDE in practice remains stable over time. The answers for both questions are crucial for handling risks of MDE, but also for the design of future studies on MDE success. This thesis addresses these questions with the goal to support adoption of MDE in future. To enable a differentiated discussion about MDE, the term MDE setting'' is introduced. MDE setting refers to the applied technical setting, i.e. the employed manual and automated activities, artifacts, languages, and tools. An MDE setting's possible impact on productivity is studied with a focus on changeability and the interrelation to software development processes. This is done by introducing a taxonomy of changeability concerns that might be affected by an MDE setting. Further, three MDE traits are identified and it is studied for which manifestations of these MDE traits software development processes are impacted. To enable the assessment and evaluation of an MDE setting's impacts, the Software Manufacture Model language is introduced. This is a process modeling language that allows to reason about how relations between (modeling) artifacts (e.g. models or code files) change during application of manual or automated development activities. On that basis, risk analysis techniques are provided. These techniques allow identifying changeability risks and assessing the manifestations of the MDE traits (and with it an MDE setting's impact on software development processes). To address the range of validity, MDE settings from practice and their evolution histories were capture in context of this thesis. First, this data is used to show that MDE settings cover the whole spectrum concerning their impact on changeability or interrelation to software development processes. Neither it is seldom that MDE settings are neutral for processes nor is it seldom that MDE settings have impact on processes. Similarly, the impact on changeability differs relevantly. Second, a taxonomy of evolution of MDE settings is introduced. In that context it is discussed to what extent different types of changes on an MDE setting can influence this MDE setting's impact on changeability and the interrelation to processes. The category of structural evolution, which can change these characteristics of an MDE setting, is identified. The captured MDE settings from practice are used to show that structural evolution exists and is common. In addition, some examples of structural evolution steps are collected that actually led to a change in the characteristics of the respective MDE settings. Two implications are: First, the assessed diversity of MDE settings evaluates the need for the analysis techniques that shall be presented in this thesis. Second, evolution is one explanation for the diversity of MDE settings in practice. To summarize, this thesis studies the nature and evolution of MDE settings in practice. As a result support for the adoption of MDE settings is provided in form of techniques for the identification of risks relating to productivity impacts.},
  language  = {en}
}
@book{BreestBoucheGrundetal.2006,
  author    = {Breest, Martin and Bouch{\´e}, Paul and Grund, Martin and Haubrock, S{\"o}ren and H{\"u}ttenrauch, Stefan and Kylau, Uwe and Ploskonos, Anna and Queck, Tobias and Schreiter, Torben},
  title     = {Fundamentals of Service-Oriented Engineering},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-939469-35-3},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33801},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {Getr. Z{\"a}hlung},
  year      = {2006},
  abstract  = {Since 2002, keywords like service-oriented engineering, service-oriented computing, and service-oriented architecture have been widely used in research, education, and enterprises. These and related terms are often misunderstood or used incorrectly. To correct these misunderstandings, a deeper knowledge of the concepts, the historical backgrounds, and an overview of service-oriented architectures is demanded and given in this paper.},
  language  = {en}
}
@inproceedings{PalixLawallThomasetal.2010,
  author    = {Palix, Nicolas and Lawall, Julia L. and Thomas, Ga{\"e}l and Muller, Gilles},
  title     = {How Often do Experts Make Mistakes?},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41327},
  year      = {2010},
  abstract  = {Large open-source software projects involve developers with a wide variety of backgrounds and expertise. Such software projects furthermore include many internal APIs that developers must understand and use properly. According to the intended purpose of these APIs, they are more or less frequently used, and used by developers with more or less expertise. In this paper, we study the impact of usage patterns and developer expertise on the rate of defects occurring in the use of internal APIs. For this preliminary study, we focus on memory management APIs in the Linux kernel, as the use of these has been shown to be highly error prone in previous work. We study defect rates and developer expertise, to consider e.g., whether widely used APIs are more defect prone because they are used by less experienced developers, or whether defects in widely used APIs are more likely to be fixed.},
  language  = {en}
}
@book{OPUS4-6986,
  title     = {HPI Future SOC Lab},
  editor    = {Meinel, Christoph and Polze, Andreas and Oswald, Gerhard and Strotmann, Rolf and Seibold, Ulrich and Schulzki, Bernard},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-86956-276-6},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68991},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {ii, 118},
  year      = {2013},
  abstract  = {The "HPI Future SOC Lab" is a cooperation of the Hasso-Plattner-Institut (HPI) and industrial partners. Its mission is to enable and promote exchange and interaction between the research community and the industrial partners. The HPI Future SOC Lab provides researchers with free of charge access to a complete infrastructure of state of the art hard- and software. This infrastructure includes components, which might be too expensive for an ordinary research environment, such as servers with up to 64 cores. The offerings address researchers particularly from but not limited to the areas of computer science and business information systems. Main areas of research include cloud computing, parallelization, and In-Memory technologies. This technical report presents results of research projects executed in 2012. Selected projects have presented their results on June 18th and November 26th 2012 at the Future SOC Lab Day events.},
  language  = {en}
}
@inproceedings{Harrison2010,
  author    = {Harrison, William},
  title     = {Malleability, obliviousness and aspects for broadcast service attachment},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41389},
  year      = {2010},
  abstract  = {An important characteristic of Service-Oriented Architectures is that clients do not depend on the service implementation's internal assignment of methods to objects. It is perhaps the most important technical characteristic that differentiates them from more common object-oriented solutions. This characteristic makes clients and services malleable, allowing them to be rearranged at run-time as circumstances change. That improvement in malleability is impaired by requiring clients to direct service requests to particular services. Ideally, the clients are totally oblivious to the service structure, as they are to aspect structure in aspect-oriented software. Removing knowledge of a method implementation's location, whether in object or service, requires re-defining the boundary line between programming language and middleware, making clearer specification of dependence on protocols, and bringing the transaction-like concept of failure scopes into language semantics as well. This paper explores consequences and advantages of a transition from object-request brokering to service-request brokering, including the potential to improve our ability to write more parallel software.},
  language  = {en}
}
@inproceedings{OPUS4-3948,
  title     = {Preface},
  editor    = {Adams, Bram and Haupt, Michael and Lohmann, Daniel},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41338},
  year      = {2010},
  abstract  = {Aspect-oriented programming, component models, and design patterns are modern and actively evolving techniques for improving the modularization of complex software. In particular, these techniques hold great promise for the development of "systems infrastructure" software, e.g., application servers, middleware, virtual machines, compilers, operating systems, and other software that provides general services for higher-level applications. The developers of infrastructure software are faced with increasing demands from application programmers needing higher-level support for application development. Meeting these demands requires careful use of software modularization techniques, since infrastructural concerns are notoriously hard to modularize. Aspects, components, and patterns provide very different means to deal with infrastructure software, but despite their differences, they have much in common. For instance, component models try to free the developer from the need to deal directly with services like security or transactions. These are primary examples of crosscutting concerns, and modularizing such concerns are the main target of aspect-oriented languages. Similarly, design patterns like Visitor and Interceptor facilitate the clean modularization of otherwise tangled concerns. Building on the ACP4IS meetings at AOSD 2002-2009, this workshop aims to provide a highly interactive forum for researchers and developers to discuss the application of and relationships between aspects, components, and patterns within modern infrastructure software. The goal is to put aspects, components, and patterns into a common reference frame and to build connections between the software engineering and systems communities.},
  language  = {en}
}
@inproceedings{SurajbaliGraceCoulson2010,
  author    = {Surajbali, Bholanathsingh and Grace, Paul and Coulson, Geoff},
  title     = {Preserving dynamic reconfiguration consistency in aspect oriented middleware},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41379},
  year      = {2010},
  abstract  = {Aspect-oriented middleware is a promising technology for the realisation of dynamic reconfiguration in heterogeneous distributed systems. However, like other dynamic reconfiguration approaches, AO-middleware-based reconfiguration requires that the consistency of the system is maintained across reconfigurations. AO-middleware-based reconfiguration is an ongoing research topic and several consistency approaches have been proposed. However, most of these approaches tend to be targeted at specific contexts, whereas for distributed systems it is crucial to cover a wide range of operating conditions. In this paper we propose an approach that offers distributed, dynamic reconfiguration in a consistent manner, and features a flexible framework-based consistency management approach to cover a wide range of operating conditions. We evaluate our approach by investigating the configurability and transparency of our approach and also quantify the performance overheads of the associated consistency mechanisms.},
  language  = {en}
}
@phdthesis{RoggeSolti2014,
  author    = {Rogge-Solti, Andreas},
  title     = {Probabilistic Estimation of Unobserved Process Events},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-70426},
  school      = {Universit{\"a}t Potsdam},
  year      = {2014},
  abstract  = {Organizations try to gain competitive advantages, and to increase customer satisfaction. To ensure the quality and efficiency of their business processes, they perform business process management. An important part of process management that happens on the daily operational level is process controlling. A prerequisite of controlling is process monitoring, i.e., keeping track of the performed activities in running process instances. Only by process monitoring can business analysts detect delays and react to deviations from the expected or guaranteed performance of a process instance. To enable monitoring, process events need to be collected from the process environment. When a business process is orchestrated by a process execution engine, monitoring is available for all orchestrated process activities. Many business processes, however, do not lend themselves to automatic orchestration, e.g., because of required freedom of action. This situation is often encountered in hospitals, where most business processes are manually enacted. Hence, in practice it is often inefficient or infeasible to document and monitor every process activity. Additionally, manual process execution and documentation is prone to errors, e.g., documentation of activities can be forgotten. Thus, organizations face the challenge of process events that occur, but are not observed by the monitoring environment. These unobserved process events can serve as basis for operational process decisions, even without exact knowledge of when they happened or when they will happen. An exemplary decision is whether to invest more resources to manage timely completion of a case, anticipating that the process end event will occur too late. This thesis offers means to reason about unobserved process events in a probabilistic way. We address decisive questions of process managers (e.g., "when will the case be finished?", or "when did we perform the activity that we forgot to document?") in this thesis. As main contribution, we introduce an advanced probabilistic model to business process management that is based on a stochastic variant of Petri nets. We present a holistic approach to use the model effectively along the business process lifecycle. Therefore, we provide techniques to discover such models from historical observations, to predict the termination time of processes, and to ensure quality by missing data management. We propose mechanisms to optimize configuration for monitoring and prediction, i.e., to offer guidance in selecting important activities to monitor. An implementation is provided as a proof of concept. For evaluation, we compare the accuracy of the approach with that of state-of-the-art approaches using real process data of a hospital. Additionally, we show its more general applicability in other domains by applying the approach on process data from logistics and finance.},
  language  = {en}
}
@book{OPUS4-3213,
  title     = {Proceedings of the 2nd International Workshop on e-learning and Virtual and Remote Laboratories},
  editor    = {Rabe, Bernhard and Rasche, Andreas},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-940793-17-1},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-34315},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {vi, 98},
  year      = {2008},
  abstract  = {Content Session 1: Architecture of Virtual \& Remote Laboratory Infrastructures (I) An Internet-Based Laboratory Course in Chemical Reaction Engineering and Unit Operations Internet Based Laboratory for Experimentation with Multilevel Medium-Power Converters Session 2: Architecture of Virtual \& Remote Laboratory Infrastructures (II) Content management and architectural issues of a remote learning laboratory Distributed Software Architecture and Applications for Remote Laboratories Tele-Lab IT-Security: an architecture for an online virtual IT security lab Session 3: New e-learning Techniques for Virtual \& Remote Laboratories NeOS: Neuchˆatel Online System A Flexible Instructional Electronics Laboratory with Local and Remote LabWorkbenches in a Grid Simulation of an Intelligent Network - Basic Call State Model Remote Laboratory Session 4: Service-Orientation in Virtual \& Remote Laboratories SOA Meets Robots - A Service-Based Software Infrastructure For Remote Laboratories Service Orientation in Education - Intelligent Networks for eLearning / mLearning},
  language  = {de}
}
@phdthesis{Dawoud2013,
  author    = {Dawoud, Wesam},
  title     = {Scalability and performance management of internet applications in the cloud},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68187},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {Cloud computing is a model for enabling on-demand access to a shared pool of computing resources. With virtually limitless on-demand resources, a cloud environment enables the hosted Internet application to quickly cope when there is an increase in the workload. However, the overhead of provisioning resources exposes the Internet application to periods of under-provisioning and performance degradation. Moreover, the performance interference, due to the consolidation in the cloud environment, complicates the performance management of the Internet applications. In this dissertation, we propose two approaches to mitigate the impact of the resources provisioning overhead. The first approach employs control theory to scale resources vertically and cope fast with workload. This approach assumes that the provider has knowledge and control over the platform running in the virtual machines (VMs), which limits it to Platform as a Service (PaaS) and Software as a Service (SaaS) providers. The second approach is a customer-side one that deals with the horizontal scalability in an Infrastructure as a Service (IaaS) model. It addresses the trade-off problem between cost and performance with a multi-goal optimization solution. This approach finds the scale thresholds that achieve the highest performance with the lowest increase in the cost. Moreover, the second approach employs a proposed time series forecasting algorithm to scale the application proactively and avoid under-utilization periods. Furthermore, to mitigate the interference impact on the Internet application performance, we developed a system which finds and eliminates the VMs suffering from performance interference. The developed system is a light-weight solution which does not imply provider involvement. To evaluate our approaches and the designed algorithms at large-scale level, we developed a simulator called (ScaleSim). In the simulator, we implemented scalability components acting as the scalability components of Amazon EC2. The current scalability implementation in Amazon EC2 is used as a reference point for evaluating the improvement in the scalable application performance. ScaleSim is fed with realistic models of the RUBiS benchmark extracted from the real environment. The workload is generated from the access logs of the 1998 world cup website. The results show that optimizing the scalability thresholds and adopting proactive scalability can mitigate 88\% of the resources provisioning overhead impact with only a 9\% increase in the cost.},
  language  = {en}
}
@book{KuropkaMeyer2005,
  author    = {Kuropka, Dominik and Meyer, Harald},
  title     = {Survey on Service Composition},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {3-937786-78-3},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33787},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {35},
  year      = {2005},
  abstract  = {It is predicted that Service-oriented Architectures (SOA) will have a high impact on future electronic business and markets. Services will provide an self-contained and standardised interface towards business and are considered as the future platform for business-to-business and business-toconsumer trades. Founded by the complexity of real world business scenarios a huge need for an easy, flexible and automated creation and enactment of service compositions is observed. This survey explores the relationship of service composition with workflow management—a technology/ concept already in use in many business environments. The similarities between the both and the key differences between them are elaborated. Furthermore methods for composition of services ranging from manual, semi- to full-automated composition are sketched. This survey concludes that current tools for service composition are in an immature state and that there is still much research to do before service composition can be used easily and conveniently in real world scenarios. However, since automated service composition is a key enabler for the full potential of Service-oriented Architectures, further research on this field is imperative. This survey closes with a formal sample scenario presented in appendix A to give the reader an impression on how full-automated service composition works.},
  language  = {en}
}
@phdthesis{Perscheid2013,
  author    = {Perscheid, Michael},
  title     = {Test-driven fault navigation for debugging reproducible failures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-68155},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {The correction of software failures tends to be very cost-intensive because their debugging is an often time-consuming development activity. During this activity, developers largely attempt to understand what causes failures: Starting with a test case that reproduces the observable failure they have to follow failure causes on the infection chain back to the root cause (defect). This idealized procedure requires deep knowledge of the system and its behavior because failures and defects can be far apart from each other. Unfortunately, common debugging tools are inadequate for systematically investigating such infection chains in detail. Thus, developers have to rely primarily on their intuition and the localization of failure causes is not time-efficient. To prevent debugging by disorganized trial and error, experienced developers apply the scientific method and its systematic hypothesis-testing. However, even when using the scientific method, the search for failure causes can still be a laborious task. First, lacking expertise about the system makes it hard to understand incorrect behavior and to create reasonable hypotheses. Second, contemporary debugging approaches provide no or only partial support for the scientific method. In this dissertation, we present test-driven fault navigation as a debugging guide for localizing reproducible failures with the scientific method. Based on the analysis of passing and failing test cases, we reveal anomalies and integrate them into a breadth-first search that leads developers to defects. This systematic search consists of four specific navigation techniques that together support the creation, evaluation, and refinement of failure cause hypotheses for the scientific method. First, structure navigation localizes suspicious system parts and restricts the initial search space. Second, team navigation recommends experienced developers for helping with failures. Third, behavior navigation allows developers to follow emphasized infection chains back to root causes. Fourth, state navigation identifies corrupted state and reveals parts of the infection chain automatically. We implement test-driven fault navigation in our Path Tools framework for the Squeak/Smalltalk development environment and limit its computation cost with the help of our incremental dynamic analysis. This lightweight dynamic analysis ensures an immediate debugging experience with our tools by splitting the run-time overhead over multiple test runs depending on developers' needs. Hence, our test-driven fault navigation in combination with our incremental dynamic analysis answers important questions in a short time: where to start debugging, who understands failure causes best, what happened before failures, and which state properties are infected.},
  language  = {en}
}
@inproceedings{BynensVanLanduytTruyenetal.2010,
  author    = {Bynens, Maarten and Van Landuyt, Dimitri and Truyen, Eddy and Joosen, Wouter},
  title     = {Towards reusable aspects: the callback mismatch problem},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41347},
  year      = {2010},
  abstract  = {Because software development is increasingly expensive and timeconsuming, software reuse gains importance. Aspect-oriented software development modularizes crosscutting concerns which enables their systematic reuse. Literature provides a number of AOP patterns and best practices for developing reusable aspects based on compelling examples for concerns like tracing, transactions and persistence. However, such best practices are lacking for systematically reusing invasive aspects. In this paper, we present the 'callback mismatch problem'. This problem arises in the context of abstraction mismatch, in which the aspect is required to issue a callback to the base application. As a consequence, the composition of invasive aspects is cumbersome to implement, difficult to maintain and impossible to reuse. We motivate this problem in a real-world example, show that it persists in the current state-of-the-art, and outline the need for advanced aspectual composition mechanisms to deal with this.},
  language  = {en}
}
@phdthesis{Gumienny2013,
  author    = {Gumienny, Raja Carola},
  title     = {Understanding the adoption of digital whiteboard systems for collaborative design work},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-72417},
  school      = {Universit{\"a}t Potsdam},
  year      = {2013},
  abstract  = {User-centered design processes are the first choice when new interactive systems or services are developed to address real customer needs and provide a good user experience. Common tools for collecting user research data, conducting brainstormings, or sketching ideas are whiteboards and sticky notes. They are ubiquitously available, and no technical or domain knowledge is necessary to use them. However, traditional pen and paper tools fall short when saving the content and sharing it with others unable to be in the same location. They are also missing further digital advantages such as searching or sorting content. Although research on digital whiteboard and sticky note applications has been conducted for over 20 years, these tools are not widely adopted in company contexts. While many research prototypes exist, they have not been used for an extended period of time in a real-world context. The goal of this thesis is to investigate what the enablers and obstacles for the adoption of digital whiteboard systems are. As an instrument for different studies, we developed the Tele-Board software system for collaborative creative work. Based on interviews, observations, and findings from former research, we tried to transfer the analog way of working to the digital world. Being a software system, Tele-Board can be used with a variety of hardware and does not depend on special devices. This feature became one of the main factors for adoption on a larger scale. In this thesis, I will present three studies on the use of Tele-Board with different user groups and foci. I will use a combination of research methods (laboratory case studies and data from field research) with the overall goal of finding out when a digital whiteboard system is used and in which cases not. Not surprisingly, the system is used and accepted if a user sees a main benefit that neither analog tools nor other applications can offer. However, I found that these perceived benefits are very different for each user and usage context. If a tool provides possibilities to use in different ways and with different equipment, the chances of its adoption by a larger group increase. Tele-Board has now been in use for over 1.5 years in a global IT company in at least five countries with a constantly growing user base. Its use, advantages, and disadvantages will be described based on 42 interviews and usage statistics from server logs. Through these insights and findings from laboratory case studies, I will present a detailed analysis of digital whiteboard use in different contexts with design implications for future systems.},
  language  = {en}
}
@inproceedings{HannousseArdourelDouence2010,
  author    = {Hannousse, Abdelhakim and Ardourel, Gilles and Douence, R{\´e}mi},
  title     = {Views for aspectualizing component models},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41359},
  year      = {2010},
  abstract  = {Component based software development (CBSD) and aspectoriented software development (AOSD) are two complementary approaches. However, existing proposals for integrating aspects into component models are direct transposition of object-oriented AOSD techniques to components. In this article, we propose a new approach based on views. Our proposal introduces crosscutting components quite naturally and can be integrated into different component models.},
  language  = {en}
}
@book{DoellnerKirschNienhaus2005,
  author    = {D{\"o}llner, J{\"u}rgen Roland Friedrich and Kirsch, Florian and Nienhaus, Marc},
  title     = {Visualizing Design and Spatial Assembly of Interactive CSG},
  publisher = {Universit{\"a}tsverlag Potsdam},
  address   = {Potsdam},
  isbn      = {978-3-937786-56-2},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-33771},
  publisher      = {Universit{\"a}t Potsdam},
  pages     = {8},
  year      = {2005},
  abstract  = {For interactive construction of CSG models understanding the layout of a model is essential for its efficient manipulation. To understand position and orientation of aggregated components of a CSG model, we need to realize its visible and occluded parts as a whole. Hence, transparency and enhanced outlines are key techniques to assist comprehension. We present a novel real-time rendering technique for visualizing design and spatial assembly of CSG models. As enabling technology we combine an image-space CSG rendering algorithm with blueprint rendering. Blueprint rendering applies depth peeling for extracting layers of ordered depth from polygonal models and then composes them in sorted order facilitating a clear insight of the models. We develop a solution for implementing depth peeling for CSG models considering their depth complexity. Capturing surface colors of each layer and later combining the results allows for generating order-independent transparency as one major rendering technique for CSG models. We further define visually important edges for CSG models and integrate an image-space edgeenhancement technique for detecting them in each layer. In this way, we extract visually important edges that are directly and not directly visible to outline a model's layout. Combining edges with transparency rendering, finally, generates edge-enhanced depictions of image-based CSG models and allows us to realize their complex, spatial assembly.},
  language  = {en}
}