@misc{AlterOttvonWebskyetal.2011,
  author    = {Alter, Markus L. and Ott, Ina and von Websky, Karoline and Tsuprykov, Oleg and Sharkovska, Yuliya and Krause-Relle, Katharina and Raila, Jens and Henze, Andrea and Kretschmer, Axel and Stasch, Johannes-Peter and Hocher, Berthold},
  title     = {Additional stimulation of sGC on top of standard treatment with ARB`s may offer a new therapeutic approach for the treatment of diabetic nephropathy resistant to ARB treatment alone},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {855},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-42825},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-428250},
  pages     = {4},
  year      = {2011},
  abstract  = {Background Riociguat is the first of a new class of drugs, the soluble guanylate cyclase (sGC) stimulators. Riociguat has a dual mode of action: it sensitizes sGC to the body's own NO and can also increase sGC activity in the absence of NO. The NO-sGC-pathway is impaired in many cardiovascular diseases such as heart failure, pulmonary hypertension and diabetic nephropathy (DN). DN leads to high cardiovascular morbidity and mortality. There is still a high unmet medical need. The urinary albumin excretion rate is a predictive biomarker for these clinical events. Therefore, we investigated the effect of riociguat, alone and in combination with the angiotensin II receptor antagonist (ARB) telmisartan on the progression of DN in diabetic eNOS knock out mice, a new model closely resembling human pathology. Methods Seventy-six male eNOS knockout C57BL/6J mice were divided into 4 groups after receiving intraperitoneal high-dose streptozotocin: telmisartan (1 mg/kg), riociguat (3 mg/kg), riociguat+telmisartan (3 and 1 mg/kg), and vehicle. Fourteen mice were used as non-diabetic controls. After 12 weeks, urine and blood were obtained and blood pressure measured. Glucose concentrations were highly increased and similar in all diabetic groups. Results Riociguat, alone (105.2 ± 2.5 mmHg; mean±SEM; n = 14) and in combination with telmisartan (105.0 ± 3.2 mmHg; n = 12), significantly reduced blood pressure versus diabetic controls (117.1 ± 2.2 mmHg; n = 14; p = 0.002 and p = 0.004, respectively), whereas telmisartan alone (111.2 ± 2.6 mmHg) showed a modest blood pressure lowering trend (p = 0.071; n = 14). The effects of single treatment with either riociguat (97.1 ± 15.7 µg/d; n = 13) or telmisartan (97.8 ± 26.4 µg/d; n = 14) did not significantly lower albumin excretion on its own (p = 0.067 and p = 0.101, respectively). However, the combined treatment led to significantly lower urinary albumin excretion (47.3 ± 9.6 µg/d; n = 12) compared to diabetic controls (170.8 ± 34.2 µg/d; n = 13; p = 0.004), and reached levels similar to non-diabetic controls (31.4 ± 10.1 µg/d, n = 12). Conclusion Riociguat significantly reduced urinary albumin excretion in diabetic eNOS knock out mice that were refractory to treatment with ARB's alone. Patients with diabetic nephropathy refractory to treatment with ARB's have the worst prognosis among all patients with diabetic nephropathy. Our data indicate that additional stimulation of sGC on top of standard treatment with ARB`s may offer a new therapeutic approach for patients with diabetic nephropathy resistant to ARB treatment.},
  language  = {en}
}
@phdthesis{Albrecht2014,
  author    = {Albrecht, Steve},
  title     = {Generation, recombination and extraction of charges in polymer},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-72285},
  school      = {Universit{\"a}t Potsdam},
  pages     = {144},
  year      = {2014},
  abstract  = {A dramatic efficiency improvement of bulk heterojunction solar cells based on electron-donating conjugated polymers in combination with soluble fullerene derivatives has been achieved over the past years. Certified and reported power conversion efficiencies now reach over 9\% for single junctions and exceed the 10\% benchmark for tandem solar cells. This trend brightens the vision of organic photovoltaics becoming competitive with inorganic solar cells including the realization of low-cost and large-area organic photovoltaics. For the best performing organic materials systems, the yield of charge generation can be very efficient. However, a detailed understanding of the free charge carrier generation mechanisms at the donor acceptor interface and the energy loss associated with it needs to be established. Moreover, organic solar cells are limited by the competition between charge extraction and free charge recombination, accounting for further efficiency losses. A conclusive picture and the development of precise methodologies for investigating the fundamental processes in organic solar cells are crucial for future material design, efficiency optimization, and the implementation of organic solar cells into commercial products. In order to advance the development of organic photovoltaics, my thesis focuses on the comprehensive understanding of charge generation, recombination and extraction in organic bulk heterojunction solar cells summarized in 6 chapters on the cumulative basis of 7 individual publications. The general motivation guiding this work was the realization of an efficient hybrid inorganic/organic tandem solar cell with sub-cells made from amorphous hydrogenated silicon and organic bulk heterojunctions. To realize this project aim, the focus was directed to the low band-gap copolymer PCPDTBT and its derivatives, resulting in the examination of the charge carrier dynamics in PCPDTBT:PC70BM blends in relation to by the blend morphology. The phase separation in this blend can be controlled by the processing additive diiodooctane, enhancing domain purity and size. The quantitative investigation of the free charge formation was realized by utilizing and improving the time delayed collection field technique. Interestingly, a pronounced field dependence of the free carrier generation for all blends is found, with the field dependence being stronger without the additive. Also, the bimolecular recombination coefficient for both blends is rather high and increases with decreasing internal field which we suggest to be caused by a negative field dependence of mobility. The additive speeds up charge extraction which is rationalized by the threefold increase in mobility. By fluorine attachment within the electron deficient subunit of PCPDTBT, a new polymer F-PCPDTBT is designed. This new material is characterized by a stronger tendency to aggregate as compared to non-fluorinated PCPDTBT. Our measurements show that for F-PCPDTBT:PCBM blends the charge carrier generation becomes more efficient and the field-dependence of free charge carrier generation is weakened. The stronger tendency to aggregate induced by the fluorination also leads to increased polymer rich domains, accompanied in a threefold reduction in the non-geminate recombination coefficient at conditions of open circuit. The size of the polymer domains is nicely correlated to the field-dependence of charge generation and the Langevin reduction factor, which highlights the importance of the domain size and domain purity for efficient charge carrier generation. In total, fluorination of PCPDTBT causes the PCE to increase from 3.6 to 6.1\% due to enhanced fill factor, short circuit current and open circuit voltage. Further optimization of the blend ratio, active layer thickness, and polymer molecular weight resulted in 6.6\% efficiency for F-PCPDTBT:PC70BM solar cells. Interestingly, the double fluorinated version 2F-PCPDTBT exhibited poorer FF despite a further reduction of geminate and non-geminate recombination losses. To further analyze this finding, a new technique is developed that measures the effective extraction mobility under charge carrier densities and electrical fields comparable to solar cell operation conditions. This method involves the bias enhanced charge extraction technique. With the knowledge of the carrier density under different electrical field and illumination conditions, a conclusive picture of the changes in charge carrier dynamics leading to differences in the fill factor upon fluorination of PCPDTBT is attained. The more efficient charge generation and reduced recombination with fluorination is counterbalanced by a decreased extraction mobility. Thus, the highest fill factor of 60\% and efficiency of 6.6\% is reached for F-PCPDTBT blends, while 2F-PCPDTBT blends have only moderate fill factors of 54\% caused by the lower effective extraction mobility, limiting the efficiency to 6.5\%. To understand the details of the charge generation mechanism and the related losses, we evaluated the yield and field-dependence of free charge generation using time delayed collection field in combination with sensitive measurements of the external quantum efficiency and absorption coefficients for a variety of blends. Importantly, both the yield and field-dependence of free charge generation is found to be unaffected by excitation energy, including direct charge transfer excitation below the optical band gap. To access the non-detectable absorption at energies of the relaxed charge transfer emission, the absorption was reconstructed from the CT emission, induced via the recombination of thermalized charges in electroluminescence. For a variety of blends, the quantum yield at energies of charge transfer emission was identical to excitations with energies well above the optical band-gap. Thus, the generation proceeds via the split-up of the thermalized charge transfer states in working solar cells. Further measurements were conducted on blends with fine-tuned energy levels and similar blend morphologies by using different fullerene derivatives. A direct correlation between the efficiency of free carrier generation and the energy difference of the relaxed charge transfer state relative to the energy of the charge separated state is found. These findings open up new guidelines for future material design as new high efficiency materials require a minimum energetic offset between charge transfer and the charge separated state while keeping the HOMO level (and LUMO level) difference between donor and acceptor as small as possible.},
  language  = {en}
}
@misc{AlHalbouniHolohanTaherietal.2018,
  author    = {Al-Halbouni, Djamil and Holohan, Eoghan P. and Taheri, Abbas and Sch{\"o}pfer, Martin P. J. and Emam, Sacha and Dahm, Torsten},
  title     = {Geomechanical modelling of sinkhole development using distinct elements},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1061},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46843},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-468435},
  pages     = {35},
  year      = {2018},
  abstract  = {Mechanical and/or chemical removal of material from the subsurface may generate large subsurface cavities, the destabilisation of which can lead to ground collapse and the formation of sinkholes. Numerical simulation of the interaction of cavity growth, host material deformation and overburden collapse is desirable to better understand the sinkhole hazard but is a challenging task due to the involved high strains and material discontinuities. Here, we present 2-D distinct element method numerical simulations of cavity growth and sinkhole development. Firstly, we simulate cavity formation by quasi-static, stepwise removal of material in a single growing zone of an arbitrary geometry and depth. We benchmark this approach against analytical and boundary element method models of a deep void space in a linear elastic material. Secondly, we explore the effects of properties of different uniform materials on cavity stability and sinkhole development. We perform simulated biaxial tests to calibrate macroscopic geotechnical parameters of three model materials representative of those in which sinkholes develop at the Dead Sea shoreline: mud, alluvium and salt. We show that weak materials do not support large cavities, leading to gradual sagging or suffusion-style subsidence. Strong materials support quasi-stable to stable cavities, the overburdens of which may fail suddenly in a caprock or bedrock collapse style. Thirdly, we examine the consequences of layered arrangements of weak and strong materials. We find that these are more susceptible to sinkhole collapse than uniform materials not only due to a lower integrated strength of the overburden but also due to an inhibition of stabilising stress arching. Finally, we compare our model sinkhole geometries to observations at the Ghor Al-Haditha sinkhole site in Jordan. Sinkhole depth ∕ diameter ratios of 0.15 in mud, 0.37 in alluvium and 0.33 in salt are reproduced successfully in the calibrated model materials. The model results suggest that the observed distribution of sinkhole depth ∕ diameter values in each material type may partly reflect sinkhole growth trends.},
  language  = {en}
}
@misc{AichnerFeakinsLeeetal.2015,
  author    = {Aichner, Bernhard and Feakins, Sarah J. and Lee, J. E. and Herzschuh, Ulrike and Liu, X.},
  title     = {High-resolution leaf wax carbon and hydrogen isotopic record of the late Holocene paleoclimate in arid Central Asia},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {506},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-40844},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-408442},
  pages     = {15},
  year      = {2015},
  abstract  = {Central Asia is located at the confluence of large-scale atmospheric circulation systems. It is thus likely to be highly susceptible to changes in the dynamics of those systems; however, little is still known about the regional paleoclimate history. Here we present carbon and hydrogen isotopic compositions of n-alkanoic acids from a late Holocene sediment core from Lake Karakuli (eastern Pamir, Xinjiang Province, China). Instrumental evidence and isotopeenabled climate model experiments with the Laboratoire de Meteorologie Dynamique Zoom model version 4 (LMDZ4) demonstrate that delta D values of precipitation in the region are influenced by both temperature and precipitation amount. We find that these parameters are inversely correlated on an annual scale, i.e., the climate has varied between relatively cool and wet and more warm and dry over the last 50 years. Since the isotopic signals of these changes are in the same direction and therefore additive, isotopes in precipitation are sensitive recorders of climatic changes in the region. Additionally, we infer that plants use year-round precipitation (including snowmelt), and thus leaf wax delta D values must also respond to shifts in the proportion of moisture derived from westerly storms during late winter and early spring. Downcore results give evidence for a gradual shift to cooler and wetter climates between 3.5 and 2.5 cal kyr BP, interrupted by a warm and dry episode between 3.0 and 2.7 kyr BP. Further cool and wet episodes occur between 1.9 and 1.5 and between 0.6 and 0.1 kyr BP, the latter coeval with the Little Ice Age. Warm and dry episodes from 2.5 to 1.9 and 1.5 to 0.6 kyr BP coincide with the Roman Warm Period and Medieval Climate Anomaly, respectively. Finally, we find a drying tend in recent decades. Regional comparisons lead us to infer that the strength and position of the westerlies, and wider northern hemispheric climate dynamics, control climatic shifts in arid Central Asia, leading to complex local responses. Our new archive from Lake Karakuli provides a detailed record of the local signatures of these climate transitions in the eastern Pamir.},
  language  = {en}
}
@misc{AgarwalMarwanMaheswaranetal.2017,
  author    = {Agarwal, Ankit and Marwan, Norbert and Maheswaran, Rathinasamy and Merz, Bruno and Kurths, J{\"u}rgen},
  title     = {Multi-scale event synchronization analysis for unravelling climate processes},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {661},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-41827},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418274},
  pages     = {13},
  year      = {2017},
  abstract  = {The temporal dynamics of climate processes are spread across different timescales and, as such, the study of these processes at only one selected timescale might not reveal the complete mechanisms and interactions within and between the (sub-) processes. To capture the non-linear interactions between climatic events, the method of event synchronization has found increasing attention recently. The main drawback with the present estimation of event synchronization is its restriction to analysing the time series at one reference timescale only. The study of event synchronization at multiple scales would be of great interest to comprehend the dynamics of the investigated climate processes. In this paper, the wavelet-based multi-scale event synchronization (MSES) method is proposed by combining the wavelet transform and event synchronization. Wavelets are used extensively to comprehend multi-scale processes and the dynamics of processes across various timescales. The proposed method allows the study of spatio-temporal patterns across different timescales. The method is tested on synthetic and real-world time series in order to check its replicability and applicability. The results indicate that MSES is able to capture relationships that exist between processes at different timescales.},
  language  = {en}
}
@misc{AdhikariGlombitzaNickeletal.2016,
  author    = {Adhikari, Rishi Ram and Glombitza, Clemens and Nickel, Julia C. and Anderson, Chloe H. and Dunlea, Ann G. and Spivack, Arthur J. and Murray, Richard W. and D'Hondt, Steven and Kallmeyer, Jens},
  title     = {Hydrogen utilization potential in subsurface sediments},
  series = {Frontiers in microbiology},
  journal   = {Frontiers in microbiology},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-407678},
  pages     = {16},
  year      = {2016},
  abstract  = {Subsurface microbial communities undertake many terminal electron-accepting processes, often simultaneously. Using a tritium-based assay, we measured the potential hydrogen oxidation catalyzed by hydrogenase enzymes in several subsurface sedimentary environments (Lake Van, Barents Sea, Equatorial Pacific, and Gulf of Mexico) with different predominant electron-acceptors. Hydrogenases constitute a diverse family of enzymes expressed by microorganisms that utilize molecular hydrogen as a metabolic substrate, product, or intermediate. The assay reveals the potential for utilizing molecular hydrogen and allows qualitative detection of microbial activity irrespective of the predominant electron-accepting process. Because the method only requires samples frozen immediately after recovery, the assay can be used for identifying microbial activity in subsurface ecosystems without the need to preserve live material. We measured potential hydrogen oxidation rates in all samples from multiple depths at several sites that collectively span a wide range of environmental conditions and biogeochemical zones. Potential activity normalized to total cell abundance ranges over five orders of magnitude and varies, dependent upon the predominant terminal electron acceptor. Lowest per-cell potential rates characterize the zone of nitrate reduction and highest per-cell potential rates occur in the methanogenic zone. Possible reasons for this relationship to predominant electron acceptor include (i) increasing importance of fermentation in successively deeper biogeochemical zones and (ii) adaptation of H(2)ases to successively higher concentrations of H-2 in successively deeper zones.},
  language  = {en}
}
@misc{AcevedoReichCubasch2015,
  author    = {Acevedo, Walter and Reich, Sebastian and Cubasch, Ulrich},
  title     = {Towards the assimilation of tree-ring-width records using ensemble Kalman filtering techniques},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  volume    = {46},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  number    = {892},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43636},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436363},
  pages     = {1909 -- 1920},
  year      = {2015},
  abstract  = {This paper investigates the applicability of the Vaganov-Shashkin-Lite (VSL) forward model for tree-ring-width chronologies as observation operator within a proxy data assimilation (DA) setting. Based on the principle of limiting factors, VSL combines temperature and moisture time series in a nonlinear fashion to obtain simulated TRW chronologies. When used as observation operator, this modelling approach implies three compounding, challenging features: (1) time averaging, (2) "switching recording" of 2 variables and (3) bounded response windows leading to "thresholded response". We generate pseudo-TRW observations from a chaotic 2-scale dynamical system, used as a cartoon of the atmosphere-land system, and attempt to assimilate them via ensemble Kalman filtering techniques. Results within our simplified setting reveal that VSL's nonlinearities may lead to considerable loss of assimilation skill, as compared to the utilization of a time-averaged (TA) linear observation operator. In order to understand this undesired effect, we embed VSL's formulation into the framework of fuzzy logic (FL) theory, which thereby exposes multiple representations of the principle of limiting factors. DA experiments employing three alternative growth rate functions disclose a strong link between the lack of smoothness of the growth rate function and the loss of optimality in the estimate of the TA state. Accordingly, VSL's performance as observation operator can be enhanced by resorting to smoother FL representations of the principle of limiting factors. This finding fosters new interpretations of tree-ring-growth limitation processes.},
  language  = {en}
}
@misc{AcevedoFallahReichetal.2017,
  author    = {Acevedo, Walter and Fallah, Bijan and Reich, Sebastian and Cubasch, Ulrich},
  title     = {Assimilation of pseudo-tree-ring-width observations into an atmospheric general circulation model},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch Naturwissenschaftliche Reihe},
  number    = {627},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-41874},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-418743},
  pages     = {545 -- 557},
  year      = {2017},
  abstract  = {Paleoclimate data assimilation (DA) is a promising technique to systematically combine the information from climate model simulations and proxy records. Here, we investigate the assimilation of tree-ring-width (TRW) chronologies into an atmospheric global climate model using ensemble Kalman filter (EnKF) techniques and a process-based tree-growth forward model as an observation operator. Our results, within a perfect-model experiment setting, indicate that the "online DA" approach did not outperform the "off-line" one, despite its considerable additional implementation complexity. On the other hand, it was observed that the nonlinear response of tree growth to surface temperature and soil moisture does deteriorate the operation of the time-averaged EnKF methodology. Moreover, for the first time we show that this skill loss appears significantly sensitive to the structure of the growth rate function, used to represent the principle of limiting factors (PLF) within the forward model. In general, our experiments showed that the error reduction achieved by assimilating pseudo-TRW chronologies is modulated by the magnitude of the yearly internal variability in themodel. This result might help the dendrochronology community to optimize their sampling efforts.},
  language  = {en}
}
@misc{AbouserieSchildeTaubert2018,
  author    = {Abouserie, Ahed and Schilde, Uwe and Taubert, Andreas},
  title     = {The crystal structure of N-butylpyridinium bis(μ2-dichlorido)-tetrachloridodicopper(II), C₁₈H₂₈N₂Cu₂Cl₆},
  series = {Zeitschrift f{\"u}r Kristallographie - New Crystal Structures},
  journal   = {Zeitschrift f{\"u}r Kristallographie - New Crystal Structures},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-417310},
  pages     = {4},
  year      = {2018},
  abstract  = {C₉H₁₄Cl₃CuN, monoclinic, P2₁/n (no. 14), a = 9.6625(6) {\AA}, b = 9.3486(3) {\AA}, c = 14.1168(8) {\AA}, β = 102.288(5)°, V = 1245.97(11) {\AA}³, Z = 4, Rgₜ(F) = 0.0182, wRᵣₑf(F²) = 0.0499, T = 210(2) K.},
  language  = {en}
}