@misc{FayUrbachScheithauer2019, author = {Fay, Doris and Urbach, Tina and Scheithauer, Linda}, title = {What motivates you right now?}, series = {Postprints der Universit{\"a}t Potsdam Humanwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam Humanwissenschaftliche Reihe}, number = {545}, issn = {1866-8364}, doi = {10.25932/publishup-42735}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427350}, pages = {17}, year = {2019}, abstract = {Regulatory focus is a motivational construct that describes humans' motivational orientation during goal pursuit. It is conceptualized as a chronic, trait-like, as well as a momentary, state-like orientation. Whereas there is a large number of measures to capture chronic regulatory focus, measures for its momentary assessment are only just emerging. This paper presents the development and validation of a measure of Momentary-Chronic Regulatory Focus. Our development incorporates the distinction between self-guide and reference-point definitions of regulatory focus. Ideals and ought striving are the promotion and prevention dimension in the self-guide system; gain and non-loss regulatory focus are the respective dimensions within the reference-point system. Three-survey-based studies test the structure, psychometric properties, and validity of the measure in its version to assess chronic regulatory focus (two samples of working participants, N = 389, N = 672; one student sample [time 1, N = 105; time 2, n = 91]). In two further studies, an experience sampling study with students (N = 84, k = 1649) and a daily-diary study with working individuals (N = 129, k = 1766), the measure was applied to assess momentary regulatory focus. Multilevel analyses test the momentary measure's factorial structure, provide support for its sensitivity to capture within-person fluctuations, and provide evidence for concurrent construct validity.}, language = {en} } @misc{FayGuillaume2007, author = {Fay, Doris and Guillaume, Yves R. F.}, title = {Team diversity}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-18295}, year = {2007}, abstract = {Team diversity refers to the differences between team members on any attribute that may lead each single member of the group to perceive any other member of the group as being different from the self of this particular member. These attributes and perceptions refer to all dimensions people can differ on, such as age, gender, ethnicity, religious and functional background, personality, skills, abilities, beliefs, and attitudes.}, language = {en} } @article{Fatianova2009, author = {Fatianova, Julia}, title = {Opritschnina}, series = {Beitr{\"a}ge zu einer vergleichenden Soziologie der Polizei}, journal = {Beitr{\"a}ge zu einer vergleichenden Soziologie der Polizei}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29436}, pages = {70 -- 88}, year = {2009}, abstract = {Inhalt: Zar Iwan Wasiljewitsch Grosnyj - Iwan, der erste russische Zar - Iwan Grosnyj und die Bojaren Opritschnina - Der Alltag der Opritschniki Das Ende der Opritschnina und ihre Folgen Opritschnina-Erbe: Bedeutung der Opritschnina f{\"u}r die Nachwelt Schlusswort}, language = {de} } @book{FathollahNejad2010, author = {Fathollah-Nejad, Ali}, title = {Der Iran-Konflikt und die Obama-Regierung : alter Wein in neuen Schl{\"a}uchen?}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, isbn = {978-3-86956-042-7}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-41177}, publisher = {Universit{\"a}t Potsdam}, pages = {78}, year = {2010}, abstract = {Mit dem Amtsantritt Barack Obamas wurden nach Jahren schwelender Kriegsgefahr mit dem Iran große Hoffnungen verbunden. Das Papier analysiert die der US-Regierung vorgelegten Iran-Strategiepapiere im Hinblick auf eine L{\"o}sung im Iran-Konflikt. Das Spektrum der angedachten Politik reicht von Scheindiplomatie zur Kriegslegitimation bis hin zu selektiver Ann{\"a}herung. Zum Schluss wird der Frage nachgegangen, inwieweit tats{\"a}chlich eine Wende in der Iran-Politik Obamas zu erwarten ist.}, language = {de} } @article{FastenrathScharlau2011, author = {Fastenrath, Ulrich and Scharlau, Maria}, title = {BVerfG : Fraport}, series = {MenschenRechtsMagazin : MRM ; Informationen, Meinungen, Analysen}, volume = {16}, journal = {MenschenRechtsMagazin : MRM ; Informationen, Meinungen, Analysen}, number = {2}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1434-2820}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60826}, pages = {197 -- 212}, year = {2011}, abstract = {Inhalt: - I. Sachverhalt - II. Das zivilgerichtliche Verfahren - III. Entscheidungsgr{\"u}nde des BVerfG - IV. Sondervotum - V. Anmerkung}, language = {de} } @article{FassbenderWeiss2002, author = {Fassbender, Bardo and Weiß, Norman}, title = {Die Vereinten Nationen und der internationale Terrorismus}, series = {Die Vereinten Nationen und Regionalorganisationen vor aktuellen Herausforderungen}, volume = {2002}, journal = {Die Vereinten Nationen und Regionalorganisationen vor aktuellen Herausforderungen}, number = {3}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-102093}, pages = {65 -- 82}, year = {2002}, abstract = {Die Vereinten Nationen und der internationale Terrorismus // Bardo Fassbender I. II. III. Anhang Die Vereinten Nationen und der internationale Terrorismus - Diskussionszusammenfassung // Norman Weiß}, language = {de} } @article{Fassbender2011, author = {Fassbender, Bardo}, title = {Die Vereinten Nationen und der internationale Terrorismus}, series = {Die Vereinten Nationen vor globalen Herausforderungen : Referate der Potsdamer UNO-Konferenzen 2000-2008}, journal = {Die Vereinten Nationen vor globalen Herausforderungen : Referate der Potsdamer UNO-Konferenzen 2000-2008}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-60999}, pages = {109 -- 122}, year = {2011}, language = {de} } @phdthesis{Farkas2022, author = {Farkas, Marton Pal}, title = {Hydraulic fracturing in hard rock - numerical studies from laboratory to reservoir scale}, doi = {10.25932/publishup-54934}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-549343}, school = {Universit{\"a}t Potsdam}, pages = {155}, year = {2022}, abstract = {Hydraulic-driven fractures play a key role in subsurface energy technologies across several scales. By injecting fluid at high hydraulic pressure into rock with intrinsic low permeability, in-situ stress field and fracture development pattern can be characterised as well as rock permeability can be enhanced. Hydraulic fracturing is a commercial standard procedure for enhanced oil and gas production of rock reservoirs with low permeability in petroleum industry. However, in EGS utilization, a major geological concern is the unsolicited generation of earthquakes due to fault reactivation, referred to as induced seismicity, with a magnitude large enough to be felt on the surface or to damage facilities and buildings. Furthermore, reliable interpretation of hydraulic fracturing tests for stress measurement is a great challenge for the energy technologies. Therefore, in this cumulative doctoral thesis the following research questions are investigated. (1): How do hydraulic fractures grow in hard rock at various scales?; (2): Which parameters control hydraulic fracturing and hydro-mechanical coupling?; and (3): How can hydraulic fracturing in hard rock be modelled? In the laboratory scale study, several laboratory hydraulic fracturing experiments are investigated numerically using Irazu2D that were performed on intact cubic Pocheon granite samples from South Korea applying different injection protocols. The goal of the laboratory experiments is to test the concept of cyclic soft stimulation which may enable sustainable permeability enhancement (Publication 1). In the borehole scale study, hydraulic fracturing tests are reported that were performed in boreholes located in central Hungary to determine the in-situ stress for a geological site investigation. At depth of about 540 m, the recorded pressure versus time curves in mica schist with low dip angle foliation show atypical evolution. In order to provide explanation for this observation, a series of discrete element computations using Particle Flow Code 2D are performed (Publication 2). In the reservoir scale study, the hydro-mechanical behaviour of fractured crystalline rock due to one of the five hydraulic stimulations at the Pohang Enhanced Geothermal site in South Korea is studied. Fluid pressure perturbation at faults of several hundred-meter lengths during hydraulic stimulation is simulated using FracMan (Publication 3). The doctoral research shows that the resulting hydraulic fracturing geometry will depend "locally", i.e. at the length scale of representative elementary volume (REV) and below that (sub-REV), on the geometry and strength of natural fractures, and "globally", i.e. at super-REV domain volume, on far-field stresses. Regarding hydro-mechanical coupling, it is suggested to define separate coupling relationship for intact rock mass and natural fractures. Furthermore, the relative importance of parameters affecting the magnitude of formation breakdown pressure, a parameter characterising hydro-mechanical coupling, is defined. It can be also concluded that there is a clear gap between the capacity of the simulation software and the complexity of the studied problems. Therefore, the computational time of the simulation of complex hydraulic fracture geometries must be reduced while maintaining high fidelity simulation results. This can be achieved either by extending the computational resources via parallelization techniques or using time scaling techniques. The ongoing development of used numerical models focuses on tackling these methodological challenges.}, language = {en} } @article{FarkasCsamango2014, author = {Farkas Csamang{\´o}, Erika}, title = {Hungarian Legislation on Climate Protection}, series = {Rechtsentwicklungen aus europ{\"a}ischer Perspektive im 21. Jahrhundert}, journal = {Rechtsentwicklungen aus europ{\"a}ischer Perspektive im 21. Jahrhundert}, number = {2}, editor = {Bad{\´o}, Attila and Belling, Detlev W.}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-74583}, pages = {153 -- 162}, year = {2014}, language = {en} } @misc{FarhyVerissimoClahsen2016, author = {Farhy, Yael and Ver{\´i}ssimo, Joao Marques and Clahsen, Harald}, title = {Universal and particular in morphological processing}, series = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Humanwissenschaftliche Reihe}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-412541}, pages = {9}, year = {2016}, abstract = {Do properties of individual languages shape the mechanisms by which they are processed? By virtue of their non-concatenative morphological structure, the recognition of complex words in Semitic languages has been argued to rely strongly on morphological information and on decomposition into root and pattern constituents. Here, we report results from a masked priming experiment in Hebrew in which we contrasted verb forms belonging to two morphological classes, Paal and Piel, which display similar properties, but crucially differ on whether they are extended to novel verbs. Verbs from the open-class Piel elicited familiar root priming effects, but verbs from the closed-class Paal did not. Our findings indicate that, similarly to other (e.g., Indo-European) languages, down-to-the-root decomposition in Hebrew does not apply to stems of non-productive verbal classes. We conclude that the Semitic word processor is less unique than previously thought: Although it operates on morphological units that are combined in a non-linear way, it engages the same universal mechanisms of storage and computation as those seen in other languages.}, language = {en} } @phdthesis{Farhy2019, author = {Farhy, Yael}, title = {Universals and particulars in morphology}, doi = {10.25932/publishup-47003}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470033}, school = {Universit{\"a}t Potsdam}, pages = {VI, 167}, year = {2019}, abstract = {For many years, psycholinguistic evidence has been predominantly based on findings from native speakers of Indo-European languages, primarily English, thus providing a rather limited perspective into the human language system. In recent years a growing body of experimental research has been devoted to broadening this picture, testing a wide range of speakers and languages, aiming to understanding the factors that lead to variability in linguistic performance. The present dissertation investigates sources of variability within the morphological domain, examining how and to what extent morphological processes and representations are shaped by specific properties of languages and speakers. Firstly, the present work focuses on a less explored language, Hebrew, to investigate how the unique non-concatenative morphological structure of Hebrew, namely a non-linear combination of consonantal roots and vowel patterns to form lexical entries (L-M-D + CiCeC = limed 'teach'), affects morphological processes and representations in the Hebrew lexicon. Secondly, a less investigated population was tested: late learners of a second language. We directly compare native (L1) and non-native (L2) speakers, specifically highly proficient and immersed late learners of Hebrew. Throughout all publications, we have focused on a morphological phenomenon of inflectional classes (called binyanim; singular: binyan), comparing productive (class Piel, e.g., limed 'teach') and unproductive (class Paal, e.g., lamad 'learn') verbal inflectional classes. By using this test case, two psycholinguistic aspects of morphology were examined: (i) how morphological structure affects online recognition of complex words, using masked priming (Publications I and II) and cross-modal priming (Publication III) techniques, and (ii) what type of cues are used when extending morpho-phonological patterns to novel complex forms, a process referred to as morphological generalization, using an elicited production task (Publication IV). The findings obtained in the four manuscripts, either published or under review, provide significant insights into the role of productivity in Hebrew morphological processing and generalization in L1 and L2 speakers. Firstly, the present L1 data revealed a close relationship between productivity of Hebrew verbal classes and recognition process, as revealed in both priming techniques. The consonantal root was accessed only in the productive class (Piel) but not the unproductive class (Paal). Another dissociation between the two classes was revealed in the cross-modal priming, yielding a semantic relatedness effect only for Paal but not Piel primes. These findings are taken to reflect that the Hebrew mental representations display a balance between stored undecomposable unstructured stems (Paal) and decomposed structured stems (Piel), in a similar manner to a typical dual-route architecture, showing that the Hebrew mental lexicon is less unique than previously claimed in psycholinguistic research. The results of the generalization study, however, indicate that there are still substantial differences between inflectional classes of Hebrew and other Indo-European classes, particularly in the type of information they rely on in generalization to novel forms. Hebrew binyan generalization relies more on cues of argument structure and less on phonological cues. Secondly, clear L1/L2 differences were observed in the sensitivity to abstract morphological and morpho-syntactic information during complex word recognition and generalization. While L1 Hebrew speakers were sensitive to the binyan information during recognition, expressed by the contrast in root priming, L2 speakers showed similar root priming effects for both classes, but only when the primes were presented in an infinitive form. A root priming effect was not obtained for primes in a finite form. These patterns are interpreted as evidence for a reduced sensitivity of L2 speakers to morphological information, such as information about inflectional classes, and evidence for processing costs in recognition of forms carrying complex morpho-syntactic information. Reduced reliance on structural information cues was found in production of novel verbal forms, when the L2 group displayed a weaker effect of argument structure for Piel responses, in comparison to the L1 group. Given the L2 results, we suggest that morphological and morphosyntactic information remains challenging for late bilinguals, even at high proficiency levels.}, language = {en} } @misc{FarhanChaudharyNoecheletal.2020, author = {Farhan, Muhammad and Chaudhary, Deeptangshu and N{\"o}chel, Ulrich and Behl, Marc and Kratz, Karl and Lendlein, Andreas}, title = {Electrical actuation of coated and composite fibers based on poly[ethylene-co-(vinyl acetate)]}, series = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Zweitver{\"o}ffentlichungen der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {2}, issn = {1866-8372}, doi = {10.25932/publishup-57167}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-571679}, pages = {10}, year = {2020}, abstract = {Robots are typically controlled by electrical signals. Resistive heating is an option to electrically trigger actuation in thermosensitive polymer systems. In this study electrically triggerable poly[ethylene-co-(vinyl acetate)] (PEVA)-based fiber actuators are realized as composite fibers as well as polymer fibers with conductive coatings. In the coated fibers, the core consists of crosslinked PEVA (cPEVA), while the conductive coating shell is achieved via a dip coating procedure with a coating thickness between 10 and 140 mu m. The conductivity of coated fibers sigma = 300-550 S m(-1) is much higher than that of the composite fibers sigma = 5.5 S m(-1). A voltage (U) of 110 V is required to heat 30 cm of coated fiber to a targeted temperature of approximate to 65 degrees C for switching in less than a minute. Cyclic electrical actuation investigations reveal epsilon '(rev) = 5 +/- 1\% reversible change in length for coated fibers. The fabrication of such electro-conductive polymeric actuators is suitable for upscaling so that their application potential as artificial muscles can be explored in future studies.}, language = {en} } @misc{FanselowSchlesewskyCavaretal.1999, author = {Fanselow, Gisbert and Schlesewsky, Matthias and Cavar, Damir and Kliegl, Reinhold}, title = {Optimal parsing: syntactic parsing preferences and optimality theory}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-57164}, year = {1999}, language = {en} } @misc{FanselowLenertova2010, author = {Fanselow, Gisbert and Lenertov{\´a}, Denisa}, title = {Left peripheral focus}, series = {Humanwissenschaftliche Reihe}, journal = {Humanwissenschaftliche Reihe}, number = {596}, issn = {1866-8364}, doi = {10.25932/publishup-42819}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-428198}, pages = {43}, year = {2010}, abstract = {In Czech, German, and many other languages, part of the semantic focus of the utterance can be moved to the left periphery of the clause. The main generalization is that only the leftmost accented part of the semantic focus can be moved. We propose that movement to the left periphery is generally triggered by an unspecific edge feature of C (Chomsky 2008) and its restrictions can be attributed to requirements of cyclic linearization, modifying the theory of cyclic linearization developed by Fox and Pesetsky (2005). The crucial assumption is that structural accent is a direct consequence of being linearized at merge, thus it is indirectly relevant for (locality restrictions on) movement. The absence of structural accent correlates with given-ness. Given elements may later receive (topic or contrastive) accents, which accounts for fronting in multiple focus/contrastive topic constructions. Without any additional assumptions, the model can account for movement of pragmatically unmarked elements to the left periphery ('formal fronting', Frey 2005). Crucially, the analysis makes no reference at all to concepts of information structure in the syntax, in line with the claim of Chomsky (2008) that UG specifies no direct link between syntax and information structure.}, language = {en} } @article{Fanselow2004, author = {Fanselow, Gisbert}, title = {Cyclic phonology-syntax-interaction}, series = {Interdisciplinary studies on information structure : ISIS ; working papers of the SFB 632}, journal = {Interdisciplinary studies on information structure : ISIS ; working papers of the SFB 632}, number = {1}, issn = {1866-4725}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-8264}, pages = {1 -- 42}, year = {2004}, abstract = {This paper investigates the nature of the attraction of XPs to clauseinitial position in German (and other languages). It argues that there are two different types of preposing. First, an XP can move when it is attracted by an EPP-like feature of Comp. Comp can, however, also attract elements that bear the formal marker of some semantic or pragmatic (information theoretic) function. This second type of movement is driven by the attraction of a formal property of the moved element. It has often been misanalysed as "operator" movement in the past. Japanese wh-questions always exhibit focus intonation (FI). Furthermore, the domain of FI exhibits a correspondence to the wh-scope. I propose that this phonology-semantics correspondence is a result of the cyclic computation of FI, which is explained under the notion of Multiple Spell-Out in the recent Minimalist framework. The proposed analysis makes two predictions: (1) embedding of an FI into another is possible; (2) (overt) movement of a wh-phrase to a phase edge position causes a mismatch between FI and wh-scope. Both predictions are tested experimentally, and shown to be borne out.}, language = {en} } @article{Fanselow2007, author = {Fanselow, Gisbert}, title = {The restricted access of information structure to syntax}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-19713}, year = {2007}, abstract = {This paper sketches the view that syntax does not directly interact with information structure. Therefore, syntactic data are of little help when one wants to narrow down the interpretation of terms such as "focus", "topic", etc.}, language = {en} } @article{Fanselow2004, author = {Fanselow, Gisbert}, title = {M{\"u}nchhausen-style head movement and the analysis of verb second}, series = {Linguistics in Potsdam}, volume = {22}, journal = {Linguistics in Potsdam}, publisher = {Universit{\"a}tsverlag Potsdam}, address = {Potsdam}, issn = {1864-1857}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-32497}, pages = {9 -- 49}, year = {2004}, abstract = {Content: 1 Introduction 2 A restrictive theory of head movement 2.1 Preliminary Remarks 2.2 Theoretical Problems of Head Movement 2.3 Remnant Phrasal Movement 2.4 M{\"u}nchhausen Style Head Movement 3 Verb Second Movement 3.1 Introductory Remarks 3.2 Problems of V/2 constructions: Does V really move to Comp? 3.3 The preverbal position 3.4 The Second Position 4 References}, language = {en} } @phdthesis{Fang2010, author = {Fang, Peng}, title = {Preparation and investigation of polymer-foam films and polymer-layer systems for ferroelectrets}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-48412}, school = {Universit{\"a}t Potsdam}, year = {2010}, abstract = {Piezoelectric materials are very useful for applications in sensors and actuators. In addition to traditional ferroelectric ceramics and ferroelectric polymers, ferroelectrets have recently become a new group of piezoelectrics. Ferroelectrets are functional polymer systems for electromechanical transduction, with elastically heterogeneous cellular structures and internal quasi-permanent dipole moments. The piezoelectricity of ferroelectrets stems from linear changes of the dipole moments in response to external mechanical or electrical stress. Over the past two decades, polypropylene (PP) foams have been investigated with the aim of ferroelectret applications, and some products are already on the market. PP-foam ferroelectrets may exhibit piezoelectric d33 coefficients of 600 pC/N and more. Their operating temperature can, however, not be much higher than 60 °C. Recently developed polyethylene-terephthalate (PET) and cyclo-olefin copolymer (COC) foam ferroelectrets show slightly better d33 thermal stabilities, but usually at the price of smaller d33 values. Therefore, the main aim of this work is the development of new thermally stable ferroelectrets with appreciable piezoelectricity. Physical foaming is a promising technique for generating polymer foams from solid films without any pollution or impurity. Supercritical carbon dioxide (CO2) or nitrogen (N2) are usually employed as foaming agents due to their good solubility in several polymers. Polyethylene propylene (PEN) is a polyester with slightly better properties than PET. A "voiding + inflation + stretching" process has been specifically developed to prepare PEN foams. Solid PEN films are saturated with supercritical CO2 at high pressure and then thermally voided at high temperatures. Controlled inflation (Gas-Diffusion Expansion or GDE) is applied in order to adjust the void dimensions. Additional biaxial stretching decreases the void heights, since it is known lens-shaped voids lead to lower elastic moduli and therefore also to stronger piezoelectricity. Both, contact and corona charging are suitable for the electric charging of PEN foams. The light emission from the dielectric-barrier discharges (DBDs) can be clearly observed. Corona charging in a gas of high dielectric strength such as sulfur hexafluoride (SF6) results in higher gas-breakdown strength in the voids and therefore increases the piezoelectricity. PEN foams can exhibit piezoelectric d33 coefficients as high as 500 pC/N. Dielectric-resonance spectra show elastic moduli c33 of 1 - 12 MPa, anti-resonance frequencies of 0.2 - 0.8 MHz, and electromechanical coupling factors of 0.016 - 0.069. As expected, it is found that PEN foams show better thermal stability than PP and PET. Samples charged at room temperature can be utilized up to 80 - 100 °C. Annealing after charging or charging at elevated temperatures may improve thermal stabilities. Samples charged at suitable elevated temperatures show working temperatures as high as 110 - 120 °C. Acoustic measurements at frequencies of 2 Hz - 20 kHz show that PEN foams can be well applied in this frequency range. Fluorinated ethylene-propylene (FEP) copolymers are fluoropolymers with very good physical, chemical and electrical properties. The charge-storage ability of solid FEP films can be significantly improved by adding boron nitride (BN) filler particles. FEP foams are prepared by means of a one-step procedure consisting of CO2 saturation and subsequent in-situ high-temperature voiding. Piezoelectric d33 coefficients up to 40 pC/N are measured on such FEP foams. Mechanical fatigue tests show that the as-prepared PEN and FEP foams are mechanically stable for long periods of time. Although polymer-foam ferroelectrets have a high application potential, their piezoelectric properties strongly depend on the cellular morphology, i.e. on size, shape, and distribution of the voids. On the other hand, controlled preparation of optimized cellular structures is still a technical challenge. Consequently, new ferroelectrets based on polymer-layer system (sandwiches) have been prepared from FEP. By sandwiching an FEP mesh between two solid FEP films and fusing the polymer system with a laser beam, a well-designed uniform macroscopic cellular structure can be formed. Dielectric resonance spectroscopy reveals piezoelectric d33 coefficients as high as 350 pC/N, elastic moduli of about 0.3 MPa, anti-resonance frequencies of about 30 kHz, and electromechanical coupling factors of about 0.05. Samples charged at elevated temperatures show better thermal stabilities than those charged at room temperature, and the higher the charging temperature, the better is the stability. After proper charging at 140 °C, the working temperatures can be as high as 110 - 120 °C. Acoustic measurements at frequencies of 200 Hz - 20 kHz indicate that the FEP layer systems are suitable for applications at least in this range.}, language = {en} } @unpublished{FangXu2005, author = {Fang, Daoyuan and Xu, Jiang}, title = {Asymptotic behavior of solutions to multidimensional nonisentropic hydrodynamic model for semiconductors}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29767}, year = {2005}, abstract = {In this paper, a global existence result of smooth solutions to the multidimen- sional nonisentropic hydrodynamic model for semiconductors is proved, under the assumption that the initial data is a perturbation of the stationary solutions for the thermal equilibrium state. The resulting evolutionary solutions converge to the stationary solutions in time asymptotically exponentially fast.}, language = {en} } @phdthesis{Fandrich2016, author = {Fandrich, Artur}, title = {Untersuchung des Verhaltens von thermoresponsiven Polymeren auf Elektroden in Interaktion mit biomolekularen Systemen}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-396551}, school = {Universit{\"a}t Potsdam}, pages = {111}, year = {2016}, abstract = {Diese Arbeit befasst sich mit der Herstellung und Charakterisierung von thermoresponsiven Filmen auf Goldelektroden durch Fixierung eines bereits synthetisierten thermoresponsiven Polymers. Als Basis f{\"u}r die Entwicklung der responsiven Grenzfl{\"a}che dienten drei unterschiedliche Copolymere (Polymere I, II und III) aus der Gruppe der thermisch schaltbaren Poly(oligo(ethylenglykol)methacrylate). Die turbidimetrischen Messungen der Copolymere in L{\"o}sungen haben gezeigt, dass der Tr{\"u}bungspunkt vom pH-Wert, der Gegenwart von Salzen sowie von der Ionenst{\"a}rke der L{\"o}sung abh{\"a}ngig ist. Nach der Charakterisierung der Polymere in L{\"o}sung wurden Experimente der kovalenten Kopplung der Polymere I bis III an die Oberfl{\"a}che der Gold-Elektroden durchgef{\"u}hrt. W{\"a}hrend bei Polymeren I und II die Ankopplung auf einer Amidverbr{\"u}ckung basierte, wurde bei Polymer III als alternative Methode zur Immobilisierung eine photoinduzierte Anbindung unter gleichzeitiger Vernetzung gew{\"a}hlt. Der Nachweis der erfolgreichen Ankopplung erfolgte bei allen Polymeren elektrochemisch mittels Cyclovoltammetrie und Impedanzspektroskopie in K3/4[Fe(CN)6]-L{\"o}sungen. Wie die Ellipsometrie-Messungen zeigten, waren die erhaltenen Polymer-Filme unterschiedlich dick. Die Ankopplung {\"u}ber Amidverbr{\"u}ckung lieferte d{\"u}nne Filme (10 - 15 nm), w{\"a}hrend der photovernetzte Film deutlich dicker war (70-80 nm) und die darunter liegende Oberfl{\"a}che relativ gut isolierte. Elektrochemische Temperaturexperimente an Polymer-modifizierten Oberfl{\"a}chen in L{\"o}sungen in Gegenwart von K3/4[Fe(CN)6] zeigten, dass auch die immobilisierten Polymere I bis III responsives Temperaturverhalten zeigen. Bei Elektroden mit den immobilisierten Polymeren I und II ist der Temperaturverlauf der Parameterwerte diskontinuierlich - ab einem kritischen Punkt (37 °C f{\"u}r Polymer I und 45 °C f{\"u}r Polymer II) wird zun{\"a}chst langsame Zunahme der Peakstr{\"o}me wird deutlich schneller. Das Temperaturverhalten von Polymer III ist dagegen bis 50 °C kontinuierlich, der Peakstrom sinkt hier durchgehend. Weiterhin wurde mit den auf Polymeren II und III basierten Elektroden deren Anwendung als responsive Matrix f{\"u}r Bioerkennungsreaktionen untersucht. Es wurde die Ankopplung von kleinen Biorezeptoren, TAG-Peptiden, an Polymer II- und Polymer III-modifizierten Elektroden durchgef{\"u}hrt. Das hydrophile FLAG-TAG-Peptid ver{\"a}ndert das Temperaturverhalten des Polymer II-Films unwesentlich, da es die Hydrophilie des Netzwerkes nicht beeinflusst. Weiterhin wurde der Effekt der Ankopplung der ANTI-FLAG-TAG-Antik{\"o}rper an FLAG-TAG-modifizierte Polymer II-Filme untersucht. Es konnte gezeigt werden, dass die Antik{\"o}rper spezifisch an FLAG-TAG-modifiziertes Polymer II binden. Es wurde keine unspezifische Anbindung von ANTI-FLAG-TAG an Polymer II beobachtet. Die Temperaturexperimente haben gezeigt, dass die thermische Restrukturierung des Polymer II-FLAG-TAG-Filmes auch nach der Antik{\"o}rper-Ankopplung noch stattfindet. Der Einfluss der ANTI-FLAG-TAG-Ankopplung ist gering, da der Unterschied in der Hydrophilie zwischen Polymer II und FLAG-TAG bzw. ANTI-FLAG-TAG zu gering ist. F{\"u}r die Untersuchungen mit Polymer III-Elektroden wurde neben dem hydrophilen FLAG-TAG-Peptid das deutlich hydrophobere HA-TAG-Peptid ausgew{\"a}hlt. Wie im Falle der Polymer II Elektrode beeinflusst das gekoppelte FLAG-TAG-Peptid das Temperaturverhalten des Polymer III-Netzwerkes nur geringf{\"u}gig. Die gemessenen Stromwerte sind geringer als bei der Polymer III-Elektrode. Das Temperaturverhalten der FLAG-TAG-Elektrode {\"a}hnelt dem der reinen Polymer III-Elektrode - die Stromwerte sinken kontinuierlich bis die Temperatur von ca. 40 °C erreicht ist, bei der ein Plateau beobachtet wird. Offensichtlich ver{\"a}ndert FLAG-TAG auch in diesem Fall nicht wesentlich die Hydrophilie des Polymer III-Netzwerkes. Das an Polymer III-Elektroden gekoppelte hydrophobe HA-TAG-Peptid beeinflusst dagegen im starken Maße den Quellzustand des Netzwerkes. Die Str{\"o}me f{\"u}r die HA-TAG-Elektroden sind deutlich geringer als die f{\"u}r die FLAG-TAG-Polymer III-Elektroden, was auf geringeren Wassergehalt und dickeren Film zur{\"u}ckzuf{\"u}hren ist. Bereits ab 30 °C erfolgt der Anstieg von Stromwerten, der bei Polymer III- bzw. bei Polymer III-FLAG-TAG-Elektroden nicht beobachtet werden kann. Das gekoppelte hydrophobe HA-TAG-Peptid verdr{\"a}ngt Wasser aus dem Polymer III-Netzwerk, was in der Stauchung des Films bereits bei Raumtemperatur resultiert. Dies f{\"u}hrt dazu, dass der Film im Laufe des Temperaturanstieges kaum noch komprimiert. Die Stromwerte steigen in diesem Fall entsprechend des Anstiegs der temperaturabh{\"a}ngigen Diffusion des Redoxpaares. Diese Untersuchungen zeigen, dass das HA-TAG-Peptid als Ankermolek{\"u}l deutlich besser f{\"u}r eine potentielle Verwendung der Polymer III-Filme f{\"u}r sensorische Zwecke geeignet ist, da es sich deutlich in der Hydrophilie von Polymer III unterscheidet.}, language = {de} }