@phdthesis{Crawford2020,
  author    = {Crawford, Michael Scott},
  title     = {Using individual-based modeling to understand grassland diversity and resilience in the Anthropocene},
  doi       = {10.25932/publishup-47941},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-479414},
  school      = {Universit{\"a}t Potsdam},
  pages     = {174},
  year      = {2020},
  abstract  = {The world's grassland systems are increasingly threatened by anthropogenic change. Susceptible to a variety of different stressors, from land-use intensification to climate change, understanding the mechanisms driving the maintenance of these systems' biodiversity and stability, and how these mechanisms may shift under human-mediated disturbance, is thus critical for successfully navigating the next century. Within this dissertation, I use an individual-based and spatially-explicit model of grassland community assembly (IBC-grass) to examine several processes, thought key to understanding their biodiversity and stability and how it changes under stress. In the first chapter of my thesis, I examine the conditions under which intraspecific trait variation influences the diversity of simulated grassland communities. In the second and third chapters of my thesis, I shift focus towards understanding how belowground herbivores influence the stability of these grassland systems to either a disturbance that results in increased, stochastic, plant mortality, or eutrophication. Intraspecific trait variation (ITV), or variation in trait values between individuals of the same species, is fundamental to the structure of ecological communities. However, because it has historically been difficult to incorporate into theoretical and statistical models, it has remained largely overlooked in community-level analyses. This reality is quickly shifting, however, as a consensus of research suggests that it may compose a sizeable proportion of the total variation within an ecological community and that it may play a critical role in determining if species coexist. Despite this increasing awareness that ITV matters, there is little consensus of the magnitude and direction of its influence. Therefore, to better understand how ITV changes the assembly of grassland communities, in the first chapter of my thesis, I incorporate it into an established, individual-based grassland community model, simulating both pairwise invasion experiments as well as the assembly of communities with varying initial diversities. By varying the amount of ITV in these species' functional traits, I examine the magnitude and direction of ITV's influence on pairwise invasibility and community coexistence. During pairwise invasion, ITV enables the weakest species to more frequently invade the competitively superior species, however, this influence does not generally scale to the community level. Indeed, unless the community has low alpha- and beta- diversity, there will be little effect of ITV in bolstering diversity. In these situations, since the trait axis is sparsely filled, the competitively inferior may suffer less competition and therefore ITV may buffer the persistence and abundance of these species for some time. In the second and third chapters of my thesis, I model how one of the most ubiquitous trophic interactions within grasslands, herbivory belowground, influences their diversity and stability. Until recently, the fundamental difficulty in studying a process within the soil has left belowground herbivory "out of sight, out of mind." This dilemma presents an opportunity for simulation models to explore how this understudied process may alter community dynamics. In the second chapter of my thesis, I implement belowground herbivory - represented by the weekly removal of plant biomass - into IBC-grass. Then, by introducing a pulse disturbance, modelled as the stochastic mortality of some percentage of the plant community, I observe how the presence of belowground herbivores influences the resistance and recovery of Shannon diversity in these communities. I find that high resource, low diversity, communities are significantly more destabilized by the presence of belowground herbivores after disturbance. Depending on the timing of the disturbance and whether the grassland's seed bank persists for more than one season, the impact of the disturbance - and subsequently the influence of the herbivores - can be greatly reduced. However, because human-mediated eutrophication increases the amount of resources in the soil, thus pressuring grassland systems, our results suggest that the influence of these herbivores may become more important over time. In the third chapter of my thesis, I delve further into understanding the mechanistic underpinnings of belowground herbivores on the diversity of grasslands by replicating an empirical mesocosm experiment that crosses the presence of herbivores above- and below-ground with eutrophication. I show that while aboveground herbivory, as predicted by theory and frequently observed in experiments, mitigates the impact of eutrophication on species diversity, belowground herbivores counterintuitively reduce biodiversity. Indeed, this influence positively interacts with the eutrophication process, amplifying its negative impact on diversity. I discovered the mechanism underlying this surprising pattern to be that, as the herbivores consume roots, they increase the proportion of root resources to root biomass. Because root competition is often symmetric, herbivory fails to mitigate any asymmetries in the plants' competitive dynamics. However, since the remaining roots have more abundant access to resources, the plants' competition shifts aboveground, towards asymmetric competition for light. This leads the community towards a low-diversity state, composed of mostly high-performance, large plant species. We further argue that this pattern will emerge unless the plants' root competition is asymmetric, in which case, like its counterpart aboveground, belowground herbivory may buffer diversity by reducing this asymmetry between the competitively superior and inferior plants. I conclude my dissertation by discussing the implications of my research on the state of the art in intraspecific trait variation and belowground herbivory, with emphasis on the necessity of more diverse theory development in the study of these fundamental interactions. My results suggest that the influence of these processes on the biodiversity and stability of grassland systems is underappreciated and multidimensional, and must be thoroughly explored if researchers wish to predict how the world's grasslands will respond to anthropogenic change. Further, should researchers myopically focus on understanding central ecological interactions through only mathematically tractable analyses, they may miss entire suites of potential coexistence mechanisms that can increase the coviability of species, potentially leading to coexistence over ecologically-significant timespans. Individual-based modelling, therefore, with its focus on individual interactions, will prove a critical tool in the coming decades for understanding how local interactions scale to larger contexts, and how these interactions shape ecological communities and further predicting how these systems will change under human-mediated stress.},
  language  = {en}
}
@phdthesis{Ciaccio2020,
  author    = {Ciaccio, Laura Anna},
  title     = {Prefixed words in morphological processing and morphological impairments},
  doi       = {10.25932/publishup-48465},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-484651},
  school      = {Universit{\"a}t Potsdam},
  pages     = {x, 276},
  year      = {2020},
  abstract  = {In recent years, a substantial number of psycholinguistic studies and of studies on acquired language impairments have investigated the case of morphologically complex words. These have provided evidence for what is known as 'morphological decomposition', i.e. a mechanism that decomposes complex words into their constituent morphemes during online processing. This is believed to be a fundamental, possibly universal mechanism of morphological processing, operating irrespective of a word's specific properties. However, current accounts of morphological decomposition are mostly based on evidence from suffixed words and compound words, while prefixed words have been comparably neglected. At the same time, it has been consistently observed that, across languages, prefixed words are less widespread than suffixed words. This cross-linguistic preference for suffixing morphology has been claimed to be grounded in language processing and language learning mechanisms. This would predict differences in how prefixed words are processed and therefore also affected in language impairments, challenging the predictions of the major accounts of morphological decomposition. Against this background, the present thesis aims at reducing the gap between the accounts of morphological decomposition and the accounts of the suffixing preference, by providing a thorough empirical investigation of prefixed words. Prefixed words are examined in three different domains: (i) visual word processing in native speakers; (ii) visual word processing in non-native speakers; (iii) acquired morphological impairments. The processing studies employ the masked priming paradigm, tapping into early stages of visual word recognition. Instead, the studies on morphological impairments investigate the errors produced in reading aloud tasks. As for native processing, the present work first focuses on derivation (Publication I), specifically investigating whether German prefixed derived words, both lexically restricted (e.g. inaktiv 'inactive') and unrestricted (e.g. unsauber 'unclean') can be efficiently decomposed. I then present a second study (Publication II) on a Bantu language, Setswana, which offers the unique opportunity of testing inflectional prefixes, and directly comparing priming with prefixed inflected primes (e.g. dikgeleke 'experts') to priming with prefixed derived primes (e.g. bokgeleke 'talent'). With regard to non-native processing (Publication I), the priming effects obtained from the lexically restricted and unrestricted prefixed derivations in native speakers are additionally compared to the priming effects obtained in a group of non-native speakers of German. Finally, in the two studies on acquired morphological impairments, the thesis investigates whether prefixed derived words yield different error patterns than suffixed derived words (Publication III and IV). For native speakers, the results show evidence for morphological decomposition of both types of prefixed words, i.e. lexically unrestricted and restricted derivations, as well as of prefixed inflected words. Furthermore, non-native speakers are also found to efficiently decompose prefixed derived words, with parallel results to the group of native speakers. I therefore conclude that, for the early stages of visual word recognition, the relative position of stem and affix in prefixed versus suffixed words does not affect how efficiently complex words are decomposed, either in native or in non-native processing. In the studies on acquired language impairments, instead, prefixes are consistently found to be more impaired than suffixes. This is explained in terms of a learnability disadvantage for prefixed words, which may cause weaker representations of the information encoded in affixes when these precede the stem (prefixes) as compared to when they follow it (suffixes). Based on the impairment profiles of the individual participants and on the nature of the task, this dissociation is assumed to emerge from later processing stages than those that are tapped into by masked priming. I therefore conclude that the different characteristics of prefixed and suffixed words do come into play at later processing stages, during which the lexical-semantic information contained in the different constituent morphemes is processed. The findings presented in the four manuscripts significantly contribute to our current understanding of the mechanisms involved in processing prefixed words. Crucially, the thesis constrains the processing disadvantage for prefixed words to later processing stages, thereby suggesting that theories trying to establish links between language universals and processing mechanisms should more carefully consider the different stages involved in language processing and what factors are relevant for each specific stage.},
  language  = {en}
}
@phdthesis{Christ2020,
  author    = {Christ, Simon},
  title     = {Morphological transitions of vesicles exposed to nonuniform spatio-temporal conditions},
  doi       = {10.25932/publishup-48078},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-480788},
  school      = {Universit{\"a}t Potsdam},
  pages     = {viii, 105},
  year      = {2020},
  abstract  = {Giant unilamellar vesicles are an important tool in todays experimental efforts to understand the structure and behaviour of biological cells. Their simple structure allows the isolation of the physical elastic properties of the lipid membrane. A central physical property is the bending energy of the membrane, since the many different shapes of giant vesicles can be obtained by finding the minimum of the bending energy. In the spontaneous curvature model the bending energy is a function of the bending rigidity as well as the mean curvature and an additional parameter called the spontaneous curvature, which describes an internal preference of the lipid-bilayer to bend towards one side or the other. The spontaneous and mean curvature are local properties of the membrane. Additional constraints arise from the conservation of the membrane surface area and the enclosed volume, which are global properties. In this thesis the spontaneous curvature model is used to explain the experimental observation of a periodic shape oscillation of a giant unilamellar vesicle that was filled with a protein complex that periodically binds to and unbinds from the membrane. By assuming that the binding of the proteins to the membrane induces a change in the spontaneous curvature the experimentally observed shapes could successfully be explained. This involves the numerical solution of the differential equations as obtained from the minimization of the bending energy respecting the area and volume constraints, the so called shape equations. Vice versa this approach can be used to estimate the spontaneous curvature from experimentally measurable quantities. The second topic of this thesis is the analysis of concentration gradients in rigid conic membrane compartments. Gradients of an ideal gas due to gravity and gradients generated by the directed stochastic movement of molecular motors along a microtubulus were considered. It was possible to calculate the free energy and the bending energy analytically for the ideal gas. In the case of the non-equilibrium system with molecular motors, the characteristic length of the density profile, the jam-length, and its dependency on the opening angle of the conic compartment have been calculated in the mean-field limit. The mean field results agree qualitatively with stochastic particle simulations.},
  language  = {en}
}
@phdthesis{Chao2020,
  author    = {Chao, Madlen},
  title     = {Entwicklung und Validierung eines Online-LIBS-Verfahrens f{\"u}r die Bestimmung von N{\"a}hrelementen in B{\"o}den},
  doi       = {10.25932/publishup-47677},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476772},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XII, 130},
  year      = {2020},
  abstract  = {In den letzten Jahrzehnten ist die Nachfrage nach kosteng{\"u}nstigen und fl{\"a}chendeckenden Kartierungsm{\"o}glichkeiten im Hinblick auf eine ertragssteigernde und umweltfreundlichere Bewirtschaftung von landwirtschaftlichen Nutzfl{\"a}chen stark gestiegen. Hierf{\"u}r eignen sich spektroskopische Methoden wie die R{\"o}ntgenfluoreszenzanalyse (RFA), Raman- und Gammaspektroskopie sowie die laserinduzierte Plasmaspektroskopie (LIBS). In Abh{\"a}ngigkeit von der Funktionsweise der jeweiligen Methoden werden Informationen zu verschiedensten Bodeneigenschaften wie N{\"a}hrelementgehalt, Textur und pH-Wert erhalten. Ziel dieser Arbeit ist die Entwicklung eines Online-LIBS-Verfahrens zur N{\"a}hrelementbestimmmung und Kartierung von Ackerfl{\"a}chen. Die LIBS ist eine schnelle und simultane Multielementanalyse bei der durch das Fokussieren eines hochenergetischen Laserpulses Probenmaterial von der Probenoberfl{\"a}che ablatiert wird und in ein Plasma {\"u}berf{\"u}hrt wird. Beim Abk{\"u}hlen des Plasmas wird Strahlung emittiert, welche R{\"u}ckschl{\"u}sse {\"u}ber die elementare Zusammensetzung der Probe gibt. Diese Arbeit ist im Teilprojekt I4S (Intelligenz f{\"u}r B{\"o}den) im Forschungsprogramm BonaRes (Boden als nachhaltige Ressource f{\"u}r die Bio{\"o}konomie) des Bundesministerium f{\"u}r Bildung und Forschung (BMBF) entstanden. Es wurden insgesamt 651 Bodenproben von verschiedenen Test-Agrarfl{\"a}chen unterschiedlichster Standorte Deutschlands gemessen, ausgewertet und zu Validierungszwecken mit entsprechender Referenzanalytik wie die Optische Emissionsspektroskopie mittels induktiv gekoppeltem Plasma (ICP-OES) und die wellenl{\"a}ngendispersive R{\"o}ntgenfluoreszenzanalyse (WDRFA) charakterisiert. F{\"u}r die Quantifizierung wurden zun{\"a}chst die Messparameter des LIBS-Systems auf die Bodenmatrix optimiert und f{\"u}r die Elemente geeignete Linien ausgew{\"a}hlt sowie deren Nachweisgrenzen bestimmt. Es hat sich gezeigt, dass eine absolute Quantifizierung basierend auf einem univariaten Ansatz aufgrund der starken Matrixeffekte und der schlechten Reproduzierbarkeit des Plasmas nur eingeschr{\"a}nkt m{\"o}glich ist. Bei Verwendung eines multivariaten Ansatz wie der Partial Least Squares Regression (PLSR) f{\"u}r die Kalibrierung konnten f{\"u}r die N{\"a}hrelemente im Vergleich zur univariaten Variante Analyseergebnisse mit h{\"o}herer G{\"u}te und geringeren Messunsicherheiten ermittelt werden. Die Untersuchungen haben gezeigt, dass das multivariate Modell weiter verbessert werden kann, indem mit einer Vielzahl von gut analysierten B{\"o}den verschiedener Standorte, Bodenarten und einem breiten Gehaltsbereich kalibriert wird. Mithilfe der Hauptkomponentenanalyse (PCA) wurde eine Klassifizierung der B{\"o}den nach der Textur realisiert. Weiterhin wurde auch eine Kalibrierung mit losem Bodenmaterial erstellt. Trotz der Signalabnahme konnten f{\"u}r die verschiedenen N{\"a}hrelemente Kalibriergeraden mit ausreichender, analytischer G{\"u}te erstellt werden. F{\"u}r den Einsatz auf dem Acker wurde außerdem der Einfluss von Korngr{\"o}ße und Feuchtigkeit auf das LIBS-Signal untersucht. Die unterschiedlichen Korngr{\"o}ßen haben nur einen geringen Einfluss auf das LIBS-Signal und das Kalibriermodell l{\"a}sst sich durch entsprechende Proben leicht anpassen. Dagegen ist der Einfluss der Feuchtigkeit deutlich st{\"a}rker und h{\"a}ngt stark von der Bodenart ab, sodass f{\"u}r jede Bodenart ein separates Kalibriermodell f{\"u}r verschiedene Feuchtigkeitsgehalte erstellt werden muss. Mithilfe der PCA kann der Feuchtigkeitsgehalt im Boden grob abgesch{\"a}tzt werden und die entsprechende Kalibrierung ausgew{\"a}hlt werden. Diese Arbeit liefert essentielle Informationen f{\"u}r eine Echtzeit-Analyse von N{\"a}hrelementen auf dem Acker mittels LIBS und leistet einen wichtigen Beitrag zu einer fortschrittlichen und zukunftsf{\"a}higen Nutzung von Ackerfl{\"a}chen.},
  language  = {de}
}
@phdthesis{Chandra2020,
  author    = {Chandra, Johan},
  title     = {The role of the oculomotor control in eye movements during reading},
  doi       = {10.25932/publishup-47593},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-475930},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 115},
  year      = {2020},
  abstract  = {Most reading theories assume that readers aim at word centers for optimal information processing. During reading, saccade targeting turns out to be imprecise: Saccades' initial landing positions often miss the word centers and have high variance, with an additional systematic error that is modulated by the distance from the launch site to the center of the target word. The performance of the oculomotor system, as reflected in the statistics of within-word landing positions, turns out to be very robust and mostly affected by the spatial information during reading. Hence, it is assumed that the saccade generation is highly automated. The main goal of this thesis is to explore the performance of the oculomotor system under various reading conditions where orthographic information and the reading direction were manipulated. Additionally, the challenges in understanding the eye movement data to represent the oculomotor process during reading are addressed. Two experimental studies and one simulation study were conducted for this thesis, which resulted in the following main findings: (i) Reading texts with orthographic manipulations leads to specific changes in the eye movement patterns, both in temporal and spatial measures. The findings indicate that the oculomotor control of eye movements during reading is dependent on reading conditions (Chapter 2 \& 3). (ii) Saccades' accuracy and precision can be simultaneously modulated under reversed reading condition, supporting the assumption that the random and systematic oculomotor errors are not independent. By assuming that readers increase the precision of sensory observation while maintaining the learned prior knowledge when reading direction was reversed, a process-oriented Bayesian model for saccade targeting can account for the simultaneous reduction of oculomotor errors (Chapter 2). (iii) Plausible parameter values serving as proxies for the intended within-word landing positions can be estimated by using the maximum a posteriori estimator from Bayesian inference. Using the mean value of all observations as proxies is insufficient for studies focusing on the launch-site effect because the method exhibits the strongest bias when estimating the size of the effect. Mislocated fixations remain a challenge for the currently known estimation methods, especially when the systematic oculomotor error is large (Chapter 4). The results reported in this thesis highlight the role of the oculomotor system, together with underlying cognitive processes, in eye movements during reading. The modulation of oculomotor control can be captured through a precise analysis of landing positions.},
  language  = {en}
}
@phdthesis{Caprioglio2020,
  author    = {Caprioglio, Pietro},
  title     = {Non-radiative recombination losses in perovskite solar cells},
  doi       = {10.25932/publishup-47763},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-477630},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vi, 242},
  year      = {2020},
  abstract  = {In the last decade the photovoltaic research has been preponderantly overturned by the arrival of metal halide perovskites. The introduction of this class of materials in the academic research for renewable energy literally shifted the focus of a large number of research groups and institutions. The attractiveness of halide perovskites lays particularly on their skyrocketing efficiencies and relatively simple and cheap fabrication methods. Specifically, the latter allowed for a quick development of this research in many universities and institutes around the world at the same time. The outcome has been a fast and beneficial increase in knowledge with a consequent terrific improvement of this new technology. On the other side, the enormous amount of research promoted an immense outgrowth of scientific literature, perpetually published. Halide perovskite solar cells are now effectively competing with other established photovoltaic technologies in terms of power conversion efficiencies and production costs. Despite the tremendous improvement, a thorough understanding of the energy losses in these systems is of imperative importance to unlock the full thermodynamic potential of this material. This thesis focuses on the understanding of the non-radiative recombination processes in the neat perovskite and in complete devices. Specifically, photoluminescence quantum yield (PLQY) measurements were applied to multilayer stacks and cells under different illumination conditions to accurately determine the quasi-Fermi levels splitting (QFLS) in the absorber, and compare it with the external open-circuit voltage of the device (V_OC). Combined with drift-diffusion simulations, this approach allowed us to pinpoint the sites of predominant recombination, but also to investigate the dynamics of the underlying processes. As such, the internal and external ideality factors, associated to the QFLS and V_OC respectively, are studied with the aim of understanding the type of recombination processes taking place in the multilayered architecture of the device. Our findings highlight the failure of the equality between QFLS and V_OC in the case of strong interface recombination, as well as the detrimental effect of all commonly used transport layers in terms of V_OC losses. In these regards, we show how, in most perovskite solar cells, different recombination processes can affect the internal QFLS and the external V_OC and that interface recombination dictates the V_OC losses. This line of arguments allowed to rationalize that, in our devices, the external ideality factor is completely dominated by interface recombination, and that this process can alone be responsible for values of the ideality factor between 1 and 2, typically observed in perovskite solar cells. Importantly, our studies demonstrated how strong interface recombination can lower the ideality factor towards values of 1, often misinterpreted as pure radiative second order recombination. As such, a comprehensive understanding of the recombination loss mechanisms currently limiting the device performance was achieved. In order to reach the full thermodynamic potential of the perovskite absorber, the interfaces of both the electron and hole transport layers (ETL/HTL) must be properly addressed and improved. From here, the second part of the research work is devoted on reducing the interfacial non-radiative energy losses by optimizing the structure and energetics of the relevant interface in our solar cell devices, with the aim of bringing their quasi-Fermi level splitting closer to its radiative limit. As such, the interfaces have been carefully addressed and optimized with different methodologies. First, a small amount of Sr is added into the perovskite precursor solution with the effect of effectively reducing surface and interface recombination. In this case, devices with V_OC up to 1.23 V were achieved and the energy losses were minimized to as low as 100 meV from the radiative limit of the material. Through a combination of different methods, we showed that these improvements are related to a strong n-type surface doping, which repels the holes in the perovskite from the surface and the interface with the ETL. Second, a more general device improvement was achieved by depositing a defect-passivating poly(ionic-liquid) layer on top of the perovskite absorber. The resulting devices featured a concomitant improvement of the V_OC and fill factor, up to 1.17 V and 83\% respectively, reaching efficiency as high as 21.4\%. Moreover, the protecting polymer layer helped to enhance the stability of the devices under prolonged maximum power point tracking measurements. Lastly, PLQY measurements are used to investigate the recombination mechanisms in halide-segregated large bandgap perovskite materials. Here, our findings showed how few iodide-rich low-energy domains act as highly efficient radiative recombination centers, capable of generating PLQY values up to 25\%. Coupling these results with a detailed microscopic cathodoluminescence analysis and absorption profiles allowed to demonstrate how the emission from these low energy domains is due to the trapping of the carriers photogenerated in the Br-rich high-energy domains. Thereby, the strong implications of this phenomenon are discussed in relation to the failure of the optical reciprocity between absorption and emission and on the consequent applicability of the Shockley-Queisser theory for studying the energy losses such systems. In conclusion, the identification and quantification of the non-radiative QFLS and V_OC losses provided a base knowledge of the fundamental limitation of perovskite solar cells and served as guidance for future optimization and development of this technology. Furthermore, by providing practical examples of solar cell improvements, we corroborated the correctness of our fundamental understanding and proposed new methodologies to be further explored by new generations of scientists.},
  language  = {en}
}
@phdthesis{Buechele2020,
  author    = {B{\"u}chele, Dominique},
  title     = {Entwicklung einer robusten Online-Methode zur Bestimmung von N{\"a}hrelementen in Ackerb{\"o}den mit einem Energie-dispersiven RFA-Sensor},
  doi       = {10.25932/publishup-48373},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-483735},
  school      = {Universit{\"a}t Potsdam},
  pages     = {IX, 106, XLV},
  year      = {2020},
  abstract  = {Im Rahmen der vom Bundesministerium f{\"u}r Bildung und -forschung gef{\"o}rderten Forschungsinitiative „BonaRes - Boden als nachhaltige Ressource der Bio{\"o}konomie" soll sich das Teilprojekt „I4S - integrated system for site-specific soil fertility management" der Entwicklung eines integrierten Systems zum ortsspezifischen Management der Bodenfruchtbarkeit widmen. Hierf{\"u}r ist eine Messplattform zur Bestimmung relevanter Bodeneigenschaften und der quantitativen Analyse ausgew{\"a}hlter Makro- und Mikron{\"a}hrstoffe geplant. In der ersten Phase dieses Projekts liegt das Hauptaugenmerk auf der Kalibrierung und Validierung der verschiedenen Sensoren auf die Matrix Boden, der Probennahme auf dem Acker und der Planung sowie dem Aufbau der Messplattform. Auf dieser Plattform sollen in der zweiten Phase des Projektes die verschiedenen Bodensensoren installiert, sowie Modelle und Entscheidungsalgorithmen zur Steuerung der D{\"u}ngung und dementsprechend Verbesserung der Bodenfunktionen erstellt werden. Ziel der vorliegenden Arbeit ist die Grundlagenuntersuchung und Entwicklung einer robusten Online-Analyse mittels Energie-dispersiver R{\"o}ntgenfluoreszenzspektroskopie (EDRFA) zur Quantifizierung ausgew{\"a}hlter Makro- und Mikron{\"a}hrstoffe in B{\"o}den f{\"u}r eine kosteng{\"u}nstige und fl{\"a}chendeckende Kartierung von Ackerfl{\"a}chen. F{\"u}r die Entwicklung eines Online-Verfahrens wurde ein dem Stand der Technik entsprechender R{\"o}ntgenfluoreszenzmesskopf in Betrieb genommen und die dazugeh{\"o}rigen Ger{\"a}teparameter auf die Matrix Boden optimiert. Die Bestimmung der analytischen Qualit{\"a}ts-merkmale wie Pr{\"a}zision und Nachweisgrenzen fand f{\"u}r eine Auswahl an N{\"a}hrelementen von Aluminium bis Zink statt. Um eine m{\"o}glichst Matrix-angepasste Kalibrierung zu erhalten, wurde sowohl mit zertifizierten Referenzmaterialien (CRM), als auch mit Ackerb{\"o}den kalibriert. Da einer der gr{\"o}ßten Nachteile der R{\"o}ntgenfluoreszenzanalyse die Beeinflussung durch Matrixeffekte ist, wurde neben der klassischen univariaten Datenauswertung auch die chemometrische multivariate Methode der Partial Least Squares Regression (PLSR) eingesetzt. Die PLSR bietet dabei den Vorteil, Matrixeffekte auszugleichen, wodurch robustere Kalibriermodelle erhalten werden k{\"o}nnen. Zus{\"a}tzlich wurde eine Hauptkomponentenanalyse (PCA) durchgef{\"u}hrt, um Gemeinsamkeiten und Ausreißer innerhalb des Probensets zu identifizieren. Es zeigte sich, dass eine Klassifizierung der B{\"o}den anhand ihrer Textur Sand, Schluff, Lehm und Ton m{\"o}glich ist. Aufbauend auf den Ergebnissen idealer Bodenproben (zu Tabletten gepresste luftgetrocknete Proben mit Korngr{\"o}ßen < 0,5 mm) wurde im Verlauf dieser Arbeit die Probenvorbereitung immer weiter reduziert und der Einfluss verschiedener Kenngr{\"o}ßen untersucht. Diese Einflussfaktoren k{\"o}nnen die Dichte und die Homogenit{\"a}t der Probe, sowie Korngr{\"o}ßeneffekte und die Feuchtigkeit sein. Anhand des RMSE (Wurzel der mittleren Fehlerquadratsumme) und unter Ber{\"u}cksichtigung der Residuen werden die jeweils erstellten Kalibriermodelle miteinander verglichen. Um die G{\"u}te der Modelle zu bewerten, wurden diese mit einem Testset validiert. Hierf{\"u}r standen 662 Bodenproben von 15 verschiedenen Standorten in Deutschland zur Verf{\"u}gung. Da die Ergebnisse an gepressten Tabletten f{\"u}r die Elemente Al, Si, K, Ca, Ti, Mn, Fe und Zn den Anforderungen f{\"u}r eine sp{\"a}tere Online-Analyse entsprechen, wurden im weiteren Verlauf dieser Arbeit Kalibriermodelle mit losen Bodenproben erstellt. Auch hier konnten gute Ergebnisse durch ausreichende Nachweisgrenzen und eine niedrige gemittelte Messabweichung bei der Vorhersage unbekannter Testproben erzielt werden. Es zeigte sich, dass die Vorhersagef{\"a}higkeit mit der multivariaten PLSR besser ist als mit der univariaten Datenauswertung, insbesondere f{\"u}r die Elemente Mn und Zn. Der untersuchte Einfluss der Feuchtigkeit und der Korngr{\"o}ßen auf die Quantifizierung der Elementgehalte war vor allem bei leichteren Elementen deutlich zu sehen. Es konnte schließlich eine multivariate Kalibrierung unter Ber{\"u}cksichtigung dieser Faktoren f{\"u}r die Elemente Al bis Zn erstellt werden, so dass ein Einsatz an B{\"o}den auf dem Acker m{\"o}glich sein sollte. Eine h{\"o}here Messunsicherheit muss dabei einkalkuliert werden. F{\"u}r eine sp{\"a}tere Probennahme auf dem Feld wurde zudem der Unterschied zwischen statischen und dynamischen Messungen betrachtet, wobei sich zeigte, dass beide Varianten genutzt werden k{\"o}nnen. Zum Abschluss wurde der hier eingesetzte Sensor mit einem kommerziell erh{\"a}ltlichen Hand-Ger{\"a}t auf sein Quantifizierungspotential hin verglichen. Der Sensor weist anhand seiner Ergebnisse ein großes Potential als Online-Sensor f{\"u}r die Messplattform auf. Die Ergebnisse unter Laborbedingungen zeigen, dass eine robuste Analyse Ackerb{\"o}den unter Ber{\"u}cksichtigung der Einflussfaktoren m{\"o}glich ist.},
  language  = {de}
}
@phdthesis{Brose2020,
  author    = {Brose, Robert},
  title     = {From dawn till dusk},
  doi       = {10.25932/publishup-47086},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-470865},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 146},
  year      = {2020},
  abstract  = {Supernova remnants are believed to be the source of cosmic rays with energies up to 10^15 eV that are produced within our Galaxy. The acceleration mechanism associated with the collision-less shocks in supernova remnants - diffusive shock acceleration - predicts a spectral index of the accelerated non-thermal particles of s = 2. However, measurements of non-thermal emission in radio, X-rays and gamma-rays reveal significant deviations of the particles spectral index from the canonical value of s = 2. The youngest Galactic supernova remnant G1.9+0.3 is an interesting target for next-generation gamma-ray observatories. So far, the remnant is only detected in the radio and the X-ray bands, but its young age of ≈100 yrs and inferred shock speed of ≈ 14, 000 km/s could make it an efficient particle accelerator. I performed spherical symmetric 1D simulations with the RATPaC code, in which I simultaneously solved the transport equation for cosmic rays, the transport equation for magnetic turbulence, and the hydro-dynamical equations for the gas flow. Separately computed distributions of the particles accelerated at the forward and the reverse shock were then used to calculate the spectra of synchrotron, inverse Compton, and Pion-decay radiation from the source. The emission from G1.9+0.3 can be self-consistently explained within the test-particle limit. I find that the X-ray flux is dominated by emission from the forward shock while most of the radio emission originates near the reverse shock, which makes G1.9+0.3 the first remnant with non-thermal radiation detected from the reverse shock. The flux of very-high-energy gamma-ray emission from G1.9+0.3 is expected to be close to the sensitivity threshold of the Cherenkov Telescope Array. The limited time available to grow large-scale turbulence limits the maximum energy of particles to values below 100 TeV, hence G1.9+0.3 is not a PeVatron. Although there are many models for the acceleration of cosmic rays in Supernova remnants, the escape of cosmic rays from these sources is yet understudied. I use our time-dependent acceleration code RATPaC to study the acceleration of cosmic rays and their escape in post-adiabatic Supernova remnants and calculate the subsequent gamma-ray emission from inverse-Compton scattering and Pion decay. My simulations span 100,000 years, thus covering the free-expansion, the Sedov-Taylor, and the beginning of the post-adiabatic phase of the remnant's evolution. At later stages of the evolution cosmic rays over a wide range of energy can reside outside of the remnant, creating spectra that are softer than predicted by standard diffusive shock acceleration and feature breaks in the 10 - 100 GeV-range. The total spectrum of cosmic rays released into the interstellar medium has a spectral index of s ≈ 2.4 above roughly 10 GeV which is close to that required by Galactic propagation models. I further find the gamma-ray luminosity to peak around an age of 4,000 years for inverse-Compton-dominated high-energy emission. Remnants expanding in low-density media emit generally more inverse-Compton radiation matching the fact that the brightest known supernova remnants - RCW86, Vela Jr, HESSJ1721-347 and RXJ1713.7-3946 - are all expanding in low density environments. The importance of feedback from the cosmic-rays on the hydrodynamical evolution of the remnants is debated as a possibility to obtain soft cosmic-ray spectra at low energies. I performed spherically symmetric 1-D simulations with a modified version of the RATPaC code, in which I simultaneously solve the transport equation for cosmic rays and the hydrodynamical equations, including the back-reaction of the cosmic-ray pressure on the flow profiles. Besides the known modification of the flow profiles and the consequently curved cosmic-ray spectra, steady-state models for non-linear diffusive shock acceleration overpredict the total compression ratio that can be reached with cosmic-ray feedback, as there is limited time for building these modifications. Further, I find modifications to the downstream flow structure that change the evolutionary behavior of the remnant and trigger a cosmic-ray-induced instability close to the contact discontinuity, if and when the cosmic-ray pressure becomes dominant there.},
  language  = {en}
}
@phdthesis{Borghini2020,
  author    = {Borghini, Alessia},
  title     = {Melt inclusions in mafic rocks as witnesses of metasomatism in the Bohemian Massif},
  doi       = {10.25932/publishup-47363},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473639},
  school      = {Universit{\"a}t Potsdam},
  pages     = {205},
  year      = {2020},
  abstract  = {Orogenic peridotites represent portions of upper subcontinental mantle now incorporated in mountain belts. They often contain layers, lenses and irregular bodies of pyroxenite and eclogite. The origin of this heterogeneity and the nature of these layers is still debated but it is likely to involve processes such as transient melts coming from the crust or the mantle and segregating in magma conduits, crust-mantle interaction, upwelling of the asthenosphere and metasomatism. All these processes occur in the lithospheric mantle and are often related with the subduction of crustal rocks to mantle depths. In fact, during subduction, fluids and melts are released from the slab and can interact with the overlying mantle, making the study of deep melts in this environment crucial to understand mantle heterogeneity and crust-mantle interaction. The aim of this thesis is precisely to better constrain how such processes take place studying directly the melt trapped as primary inclusions in pyroxenites and eclogites. The Bohemian Massif, crystalline core of the Variscan belt, is targeted for these purposes because it contains orogenic peridotites with layers of pyroxenite and eclogite and other mafic rocks enclosed in felsic high pressure and ultra-high pressure crustal rocks. Within this Massif mafic rocks from two areas have been selected: the garnet clinopyroxenite in orogenic peridotite of the Granulitgebirge and the ultra-high pressure eclogite in the diamond-bearing gneisses of the Erzgebirge. In both areas primary melt inclusions were recognized in the garnet, ranging in size between 2-25 µm and with different degrees of crystallization, from glassy to polycrystalline. They have been investigated with Micro Raman spectroscopy and EDS mapping and the mineral assemblage is kumdykolite, phlogopite, quartz, kokchetavite, phase with a main Raman peak at 430 cm-1, phase with a main Raman peak at 412 cm-1, white mica and calcite with some variability in relative abundance depending on the case study. In the Granulitgebirge osumilite and pyroxene are also present, whereas calcite is one of the main phases in the Erzgebirge. The presence of glass and the mineral assemblage in the nanogranitoids suggest that they were former droplets of melt trapped in the garnet while it was growing. Glassy inclusions and re-homogenized nanogranitoids show a silicate melt that is granitic, hydrous, high in alkalis and weakly peraluminous. The melt is also enriched in both case studies in Cs, Pb, Rb, U, Th, Li and B suggesting the involvement of crustal component, i.e. white mica (main carrier of Cs, Pb, Rb, Li and B), and a fluid (Cs, Th and U) in the melt producing reaction. The whole rock in both cases mainly consists of garnet and clinopyroxene with, in Erzgebirge samples, the additional presence of quartz both in the matrix and as a polycrystalline inclusion in the garnet. The latter is interpreted as a quartz pseudomorph after coesite and occurs in the same microstructural position as the melt inclusions. Both rock types show a crustal and subduction zone signature with garnet and clinopyroxene in equilibrium. Melt was likely present during the metamorphic peak of the rock, as it occurs in garnet. Our data suggest that the processes most likely responsible for the formation of the investigated rocks in both areas is a metasomatic reaction between a melt produced in the crust and mafic layers formerly located in the mantle wedge for the Granulitgebirge and in the subducted continental crust itself in the Erzgebirge. Thus metasomatism in the first case took place in the mantle overlying the slab, whereas in the second case metasomatism took place in the continental crust that already contained, before subduction, mafic layers. Moreover, the presence of former coesite in the same microstructural position of the melt inclusions in the Erzgebirge garnets suggest that metasomatism took place at ultra-high pressure conditions. Summarizing, in this thesis we provide new insights into the geodynamic evolution of the Bohemian Massif based on the study of melt inclusions in garnet in two different mafic rock types, combining the direct microstructural and geochemical investigation of the inclusions with the whole-rock and mineral geochemistry. We report for the first time data, directly extracted from natural rocks, on the metasomatic melt responsible for the metasomatism of several areas of the Bohemian Massif. Besides the two locations here investigated, belonging to the Saxothuringian Zone, a signature similar to the investigated melt is clearly visible in pyroxenite and peridotite of the T-7 borehole (again Saxothuringian Zone) and the durbachite suite located in the Moldanubian Zone.},
  language  = {en}
}
@phdthesis{Bombart2020,
  author    = {Bombart, Diane},
  title     = {The geometry of a complex institution},
  doi       = {10.25932/publishup-48872},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-488724},
  school      = {Universit{\"a}t Potsdam},
  pages     = {181},
  year      = {2020},
  abstract  = {Organizations incorporate the institutional demands from their environment in order to be deemed legitimate and survive. Yet, complexifying societies promulgate multiple and sometimes inconsistent institutional prescriptions. When these prescriptions collide, organizations are said to face "institutional complexity". How does an organization then incorporate incompatible demands? What are the consequences of institutional complexity for an organization? The literature provides contradictory conceptual and empirical insights on the matter. A central assumption, however, remains that internal incompatibilities generate tensions that, under certain conditions, can escalate into intractable conflicts, resulting in dysfunctionality and loss of legitimacy. The present research is an inquiry into what happens inside an organization when it incorporates complex institutional demands. To answer this question, I focus on how individuals inside an organization interpret a complex institutional prescription. I examine how members of the French Development Agency interpret 'results-based management', a central but complex concept of organizing in the field of development aid. I use an inductive mixed methods design to systematically explore how different interpretations of results-based management relate to one another and to the organizational context in which they are embedded. The results reveal that results-based management is a contested concept in the French Development Agency. I find multiple interpretations of the concept, which are attached to partly incompatible rationales about "who we are" and "what we do as an organization". These rationales nevertheless coexist as balanced forces, without escalating into open conflict. The analysis points to four reasons for this peaceful coexistence of diverging rationales inside one and the same organization: 1) individuals' capacity to manipulate different interpretations of a complex institutional demand, 2) the nature of interpretations, which makes them more or less prone to conflict, 3) the balanced distribution of rationales across the organizational sub-contexts and 4) the shared rules of interpretation provided by the larger socio-cultural context. This research shows that an organization that incorporates institutional complexity comes to represent different, partly incompatible things to its members without being at war with itself. In doing so, it contributes to our knowledge of institutional complexity and organizational hybridity. It also advances our understanding of internal organizational legitimacy and of the translation of managerial concepts in organizations.},
  language  = {en}
}
@phdthesis{Biedermann2020,
  author    = {Biedermann, Nicole},
  title     = {Carbonate-silicate reactions at conditions of the Earth's mantle and the role of carbonates as possible trace-element carriers},
  doi       = {10.25932/publishup-48277},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-482772},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 127},
  year      = {2020},
  abstract  = {Carbonates play a key role in the chemistry and dynamics of our planet. They are directly connected to the CO2 budget of our atmosphere and have a great impact on the deep carbon cycle. Moreover, recent studies have shown that carbonates are stable along the geothermal gradient down to Earth's lower mantle conditions, changing their crystal structure and related properties. Subducted carbonates may also react with silicates to form new phases. These reactions will redistribute elements, such as calcium (Ca), magnesium (Mg), iron (Fe) and carbon in the form of carbon dioxide (CO2), but also trace elements, that are carried by the carbonates. The trace elements of most interest are strontium (Sr) and rare earth elements (REE) which have been found to be important constituents in the composition of the primitive lower mantle and in mineral inclusions found in super-deep diamonds. However, the stability of carbonates in presence of mantle silicates at relevant temperatures is far from being well understood. Related to this, very little is known about distribution processes of trace elements between carbonates and mantle silicates. To shed light on these processes, we studied reactions between Sr- and REE-containing CaCO3 and Mg/Fe-bearing silicates of the system (Mg,Fe)2SiO4 - (Mg,Fe)SiO3 at high pressure and high temperature using synchrotron radiation based μ-X-ray diffraction (μ-XRD) and μ-X-ray fluorescence (μ-XRF) with μm-resolution in a laser-heated diamond anvil cell. X-ray diffraction is used to derive the structural changes of the phase reactions whereas X-ray fluorescence gives information on the chemical changes in the sample. In-situ experiments at high pressure and high temperature were performed at beamline P02.2 at PETRA III (Hamburg, Germany) and at beamline ID27 at ESRF (Grenoble, France). In addition to μ-XRD and μ-XRF, ex-situ measurements were made on the recovered sample material using transmission electron microscopy (TEM) and provided further insights into the reaction kinetics of carbonate-silicate reactions. Our investigations show that CaCO3 is unstable in presence of mantle silicates above 1700 K and a reaction takes place in which magnesite plus CaSiO3-perovskite are formed. In addition, we observed that a high content of iron in the carbonate-silicate system favours dolomite formation during the reaction. The subduction of natural carbonates with significant amounts of Sr leads to a comprehensive investigation of the stability not only of CaCO3 phases in contact with mantle silicates but also of SrCO3 (and of Sr-bearing CaCO3). We found that SrCO3 reacts with (Mg,Fe)SiO3-perovskite to form magnesite and gained evidence for the formation of SrSiO3-perovskite. To complement our study on the stability of SrCO3 at conditions of the Earth's lower mantle, we performed powder X-ray diffraction and single crystal X-ray diffraction experiments at ambient temperature and up to 49 GPa. We observed a transformation from SrCO3-I into a new high-pressure phase SrCO3-II at around 26 GPa with Pmmn crystal structure and a bulk modulus of 103(10) GPa. This information is essential to fully understand the phase behaviour and stability of carbonates in the Earth's lower mantle and to elucidate the possibility of introducing Sr into mantle silicates by carbonate-silicate reactions. Simultaneous recording of μ-XRD and μ-XRF in the μm-range over the heated areas provides spatial information not only about phase reactions but also on the elemental redistribution during the reactions. A comparison of the spatial intensity distribution of the XRF signal before and after heating indicates a change in the elemental distribution of Sr and an increase in Sr-concentration was found around the newly formed SrSiO3-perovskite. With the help of additional TEM analyses on the quenched sample material the elemental redistribution was studied at a sub-micrometer scale. Contrary to expectations from combined μ-XRD and μ-XRF measurements, we found that La and Eu were not incorporated into the silicate phases, instead they tend to form either isolated oxide phases (e.g. Eu2O3, La2O3) or hydroxyl-bastn{\"a}site (La(CO3)(OH)). In addition, we observed the transformation from (Mg,Fe)SiO3-perovskite to low-pressure clinoenstatite during pressure release. The monoclinic structure (P21/c) of this phase allows the incorporation of Ca as shown by additional EDX analyses and, to a minor extent, Sr too. Based on our experiments, we can conclude that a detection of the trace elements in-situ at high pressure and high temperature remains challenging. However, our first findings imply that silicates may incorporate the trace elements provided by the carbonates and indicate that carbonates may have a major effect on the trace element contents of mantle phases.},
  language  = {en}
}
@phdthesis{Barrionuevo2020,
  author    = {Barrionuevo, Mat{\´i}as},
  title     = {The role of the upper plate in the Andean tectonic evolution (33-36°S): insights from structural geology and numerical modeling},
  doi       = {10.25932/publishup-51590},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-515909},
  school      = {Universit{\"a}t Potsdam},
  pages     = {148, S2},
  year      = {2020},
  abstract  = {Los Andes Centrales del Sur (33-36°S) son un gran laboratorio para el estudio de los procesos de deformaci{\´o}n orog{\´e}nica, donde las condiciones de borde, como la geometr{\´i}a de la placa subductada, imponen un importante control sobre la deformaci{\´o}n andina. Por otro lado, la Placa Sudamericana presenta una serie de heterogeneidades que tambi{\´e}n imparten un control sobre el modo de deformaci{\´o}n. El objetivo de esta tesis es probar el control de este {\´u}ltimo factor sobre la construcci{\´o}n del sistema orog{\´e}nico andino. A partir de la integraci{\´o}n de la informaci{\´o}n superficial y de subsuelo en el {\´a}rea sur (34°-36°S), se estudi{\´o} la evoluci{\´o}n de la deformaci{\´o}n andina sobre el segmento de subducci{\´o}n normal. Se desarroll{\´o} un modelo estructural que eval{\´u}a el estado de esfuerzos desde el Mioceno hasta la actualidad, el rol de estructuras previas y su influencia en la migraci{\´o}n de fluidos. Con estos datos y publicaciones previas de la zona norte del {\´a}rea de estudio (33°-34ºS), se realiz{\´o} un modelado num{\´e}rico geodin{\´a}mico para probar la hip{\´o}tesis del papel de las heterogeneidades de la placa superior en la evoluci{\´o}n andina. Se utilizaron dos c{\´o}digos (LAPEX-2D y ASPECT) basados en elementos finitos/diferencias finitas, que simulan el comportamiento de materiales con reolog{\´i}as elastoviscopl{\´a}sticas bajo deformaci{\´o}n. Los resultados del modelado sugieren que la deformaci{\´o}n contraccional de la placa superior est{\´a} significativamente controlada por la resistencia de la lit{\´o}sfera, que est{\´a} definida por la composici{\´o}n de la corteza superior e inferior y por la proporci{\´o}n del manto litosf{\´e}rico, que a su vez est{\´a} definida por eventos tect{\´o}nicos previos. Estos eventos previos tambi{\´e}n definieron la composici{\´o}n de la corteza y su geometr{\´i}a, que es otro factor que controla la localizaci{\´o}n de la deformaci{\´o}n. Con una composici{\´o}n de corteza inferior m{\´a}s f{\´e}lsica, la deformaci{\´o}n sigue un modo de cizalla pura mientras que las composiciones m{\´a}s m{\´a}ficas provocan un modo de deformaci{\´o}n tipo cizalla simple. Por otro lado, observamos que el espesor inicial de la lit{\´o}sfera controla la localizaci{\´o}n de la deformaci{\´o}n, donde zonas con lit{\´o}sfera m{\´a}s fina es propensa a concentrar la deformaci{\´o}n. Un l{\´i}mite lit{\´o}sfera-asten{\´o}sfera asim{\´e}trico, como resultado del flujo de la cu{\~n}a mant{\´e}lica tiende a generar despegues vergentes al E.},
  language  = {en}
}
@phdthesis{Barbosa2020,
  author    = {Barbosa, Lu{\´i}s Romero},
  title     = {Groundwater recharge in tropical wet regions via GIS-based and cosmic-ray neutron sensing},
  doi       = {10.25932/publishup-46064},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-460641},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XXVI, 175},
  year      = {2020},
  abstract  = {Studies on the unsustainable use of groundwater resources are still considered incipient since it is frequently a poorly understood and managed, devalued and inadequately protected natural resource. Groundwater Recharge (GWR) is one of the most challenging elements to estimate since it can rarely be measured directly and cannot easily be derived from existing data. To overcome these limitations, many hydro(geo)logists have combined different approaches to estimate large-scale GWR, namely: remote sensing products, such as IMERG product; Water Budget Equation, also in combination with hydrological models, and; Geographic Information System (GIS), using estimation formulas. For intermediary-scale GWR estimation, there exist: Non-invasive Cosmic-Ray Neutron Sensing (CRNS); wireless networks from local soil probes; and soil hydrological models, such as HYDRUS. Accordingly, this PhD thesis aims, on the one hand, to demonstrate a GIS-based model coupling for estimating the GWR distribution on a large scale in tropical wet basins. On the other hand, it aims to use the time series from CRNS and invasive soil moisture probes to inversely calibrate the soil hydraulic properties, and based on this, estimating the intermediary-scale GWR using a soil hydrological model. For such purpose, two tropical wet basins located in a complex sedimentary aquifer in the coastal Northeast region of Brazil were selected. These are the Jo{\~a}o Pessoa Case Study Area and the Guara{\´i}ra Experimental Basin. Several satellite products in the first area were used as input to the GIS-based water budget equation model for estimating the water balance components and GWR in 2016 and 2017. In addition, the point-scale measurement and CRNS data were used in the second area to determine the soil hydraulic properties, and to estimate the GWR in the 2017-2018 and 2018-2019 hydrological years. The resulting values of GWR on large- and intermediary-scale were then compared and validated by the estimates obtained by groundwater table fluctuations. The GWR rates for IMERG- and rain-gauge-based scenarios showed similar coefficients between 68\% and 89\%, similar mean errors between 30\% and 34\%, and slightly-different bias between -13\% and 11\%. The results of GWR rates for soil probes and CRNS soil moisture scenarios ranged from -5.87 to -61.81 cm yr-1, which corresponds to 5\% and 38\% of the precipitation. The calculations of the mean GWR rates on large-scale, based on remote sensing data, and on intermediary-scale, based on CRNS data, held similar results for the Podzol soil type, namely 17.87\% and 17\% of the precipitation. It is then concluded that the proposed methodologies allowed for estimating realistically the GWR over the study areas, which can be a ground-breaking step towards improving the water management and decision-making in the Northeast of Brazil.},
  language  = {en}
}
@phdthesis{Banerjee2020,
  author    = {Banerjee, Pallavi},
  title     = {Glycosylphosphatidylinositols (GPIs) and GPI-anchored proteins tethered to lipid bilayers},
  doi       = {10.25932/publishup-48956},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-489561},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xv, 141},
  year      = {2020},
  abstract  = {Glycosylphosphatidylinositols (GPIs) are highly complex glycolipids that serve as membrane anchors to a large variety of eukaryotic proteins. These are covalently attached to a group of peripheral proteins called GPI-anchored proteins (GPI-APs) through a post-translational modification in the endoplasmic reticulum. The GPI anchor is a unique structure composed of a glycan, with phospholipid tail at one end and a phosphoethanolamine linker at the other where the protein attaches. The glycan part of the GPI comprises a conserved pseudopentasaccharide core that could branch out to carry additional glycosyl or phosphoethanolamine units. GPI-APs are involved in a diverse range of cellular processes, few of which are signal transduction, protein trafficking, pathogenesis by protozoan parasites like the malaria- causing parasite Plasmodium falciparum. GPIs can also exist freely on the membrane surface without an attached protein such as those found in parasites like Toxoplasma gondii, the causative agent of Toxoplasmosis. These molecules are both structurally and functionally diverse, however, their structure-function relationship is still poorly understood. This is mainly because no clear picture exists regarding how the protein and the glycan arrange with respect to the lipid layer. Direct experimental evidence is rather scarce, due to which inconclusive pictures have emerged, especially regarding the orientation of GPIs and GPI-APs on membrane surfaces and the role of GPIs in membrane organization. It appears that computational modelling through molecular dynamics simulations would be a useful method to make progress. In this thesis, we attempt to explore characteristics of GPI anchors and GPI-APs embedded in lipid bilayers by constructing molecular models at two different resolutions - all-atom and coarse-grained. First, we show how to construct a modular molecular model of GPIs and GPI-anchored proteins that can be readily extended to a broad variety of systems, addressing the micro-heterogeneity of GPIs. We do so by creating a hybrid link to which GPIs of diverse branching and lipid tails of varying saturation with their optimized force fields, GLYCAM06 and Lipid14 respectively, can be attached. Using microsecond simulations, we demonstrate that GPI prefers to "flop-down" on the membrane, thereby, strongly interacting with the lipid heads, over standing upright like a "lollipop". Secondly, we extend the model of the GPI core to carry out a systematic study of the structural aspects of GPIs carrying different side chains (parasitic and human GPI variants) inserted in lipid bilayers. Our results demonstrate the importance of the side branch residues as these are the most accessible, and thereby, recognizable epitopes. This finding qualitatively agrees with experimental observations that highlight the role of the side branches in immunogenicity of GPIs and the specificity thereof. The overall flop-down orientation of the GPIs with respect to the bilayer surface presents the side chain residues to face the solvent. Upon attaching the green fluorescent protein (GFP) to the GPI, it is seen to lie in close proximity to the bilayer, interacting both with the lipid heads and glycan part of the GPI. However the orientation of GFP is sensitive to the type of GPI it is attached to. Finally, we construct a coarse-grained model of the GPI and GPI-anchored GFP using a modified version of the MARTINI force-field, using which the timescale is enhanced by at least an order of magnitude compared to the atomistic system. This study provides a theoretical perspective on the conformational behavior of the GPI core and some of its branched variations in presence of lipid bilayers, as well as draws comparisons with experimental observations. Our modular atomistic model of GPI can be further employed to study GPIs of variable branching, and thereby, aid in designing future experiments especially in the area of vaccines and drug therapies. Our coarse-grained model can be used to study dynamic aspects of GPIs and GPI-APs w.r.t plasma membrane organization. Furthermore, the backmapping technique of converting coarse-grained trajectory back to the atomistic model would enable in-depth structural analysis with ample conformational sampling.},
  language  = {en}
}
@phdthesis{Aseev2020,
  author    = {Aseev, Nikita},
  title     = {Modeling and understanding dynamics of charged particles in the Earth's inner magnetosphere},
  doi       = {10.25932/publishup-47921},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-479211},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxii, 154},
  year      = {2020},
  abstract  = {The Earth's inner magnetosphere is a very dynamic system, mostly driven by the external solar wind forcing exerted upon the magnetic field of our planet. Disturbances in the solar wind, such as coronal mass ejections and co-rotating interaction regions, cause geomagnetic storms, which lead to prominent changes in charged particle populations of the inner magnetosphere - the plasmasphere, ring current, and radiation belts. Satellites operating in the regions of elevated energetic and relativistic electron fluxes can be damaged by deep dielectric or surface charging during severe space weather events. Predicting the dynamics of the charged particles and mitigating their effects on the infrastructure is of particular importance, due to our increasing reliance on space technologies. The dynamics of particles in the plasmasphere, ring current, and radiation belts are strongly coupled by means of collisions and collisionless interactions with electromagnetic fields induced by the motion of charged particles. Multidimensional numerical models simplify the treatment of transport, acceleration, and loss processes of these particles, and allow us to predict how the near-Earth space environment responds to solar storms. The models inevitably rely on a number of simplifications and assumptions that affect model accuracy and complicate the interpretation of the results. In this dissertation, we quantify the processes that control electron dynamics in the inner magnetosphere, paying particular attention to the uncertainties of the employed numerical codes and tools. We use a set of convenient analytical solutions for advection and diffusion equations to test the accuracy and stability of the four-dimensional Versatile Electron Radiation Belt (VERB-4D) code. We show that numerical schemes implemented in the code converge to the analytical solutions and that the VERB-4D code demonstrates stable behavior independent of the assumed time step. The order of the numerical scheme for the convection equation is demonstrated to affect results of ring current and radiation belt simulations, and it is crucially important to use high-order numerical schemes to decrease numerical errors in the model. Using the thoroughly tested VERB-4D code, we model the dynamics of the ring current electrons during the 17 March 2013 storm. The discrepancies between the model and observations above 4.5 Earth's radii can be explained by uncertainties in the outer boundary conditions. Simulation results indicate that the electrons were transported from the geostationary orbit towards the Earth by the global-scale electric and magnetic fields. We investigate how simulation results depend on the input models and parameters. The model is shown to be particularly sensitive to the global electric field and electron lifetimes below 4.5 Earth's radii. The effects of radial diffusion and subauroral polarization streams are also quantified. We developed a data-assimilative code that blends together a convection model of energetic electron transport and loss and Van Allen Probes satellite data by means of the Kalman filter. We show that the Kalman filter can correct model uncertainties in the convection electric field, electron lifetimes, and boundary conditions. It is also demonstrated how the innovation vector - the difference between observations and model prediction - can be used to identify physical processes missing in the model of energetic electron dynamics. We computed radial profiles of phase space density of ultrarelativistic electrons, using Van Allen Probes measurements. We analyze the shape of the profiles during geomagnetically quiet and disturbed times and show that the formation of new local minimums in the radial profiles coincides with the ground observations of electromagnetic ion-cyclotron (EMIC) waves. This correlation indicates that EMIC waves are responsible for the loss of ultrarelativistic electrons from the heart of the outer radiation belt into the Earth's atmosphere.},
  language  = {en}
}
@phdthesis{Arya2020,
  author    = {Arya, Pooja},
  title     = {Light controlled active and passive motion of colloidal particles},
  doi       = {10.25932/publishup-48388},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-483880},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvii, 183},
  year      = {2020},
  abstract  = {In this dissertation we introduce a concept of light driven active and passive manipulation of colloids trapped at solid/liquid interface. The motion is induced due to generation of light driven diffusioosmotic flow (LDDO) upon irradiation with light of appropriate wavelength. The origin of the flow is due to osmotic pressure gradient resulting from a concentration gradient at the solid/liquid interface of the photosensitive surfactant present in colloidal dispersion. The photosensitive surfactant consists of a cationic head group and a hydrophobic tail in which azobenzene group is integrated in. The azobenzene is known to undergo reversible photo-isomerization from a stable trans to a meta stable cis state under irradiation with UV light. Exposure to light of larger wavelength results in back photo-isomerization from cis to trans state. The two isomers have different molecular properties, for instance, trans isomer has a rod like structure and low polarity (0 dipole moment), whereas cis one is bent and has a dipole moment of ~3 Debye. Being integrated in the hydrophobic tail of the surfactant molecule, the azobenzene state determines the hydrophobicity of the whole molecule: in the trans state the surfactant is more hydrophobic than in the cis-state. In this way many properties of the surfactant such as the CMC, solubility and the interaction potential with a solid surface can be altered by light. When the solution containing such a surfactant is irradiated with focused light, a concentration gradient of different isomers is formed near the boundary of the irradiated area near the solid surface resulting in osmotic pressure gradient. The generated diffusioosmotic (DO) flow carries the particles passively along. The local-LDDO flow can be generated around and by each particle when mesoporous silica colloids are dispersed in the surfactant solution. This is because porous particles act as a sink/source which absorbs azobenzene molecule in trans state and expels it when it is in the cis state. The DO flows generated at each particle interact resulting in aggregation or separation depending upon the initial state of surfactant molecules. The kinetic of aggregation and separation can be controlled and manipulated by altering the parameters such as the wavelength and intensity of the applied light, as well as surfactant and particle concentration. Using two wavelengths simultaneously allows for dynamic gathering and separation creating fascinating patterns such as 2D disk of well separated particles or establishing collective complex behaviour of particle ensemble as described in this thesis. The mechanism of l-LDDO is also used to generate self-propelled motion. This is possible when half of the porous particle is covered by metal layer, basically blocking the pores on one side. The LDDO flow generated on uncapped side pushes the particle forward resulting in a super diffusive motion. The system of porous particle and azobenzene containing surfactant molecule can be utilized for various application such as drug delivery, cargo transportation, self-assembling, micro motors/ machines or micro patterning.},
  language  = {en}
}
@phdthesis{Arentsen2020,
  author    = {Arentsen, Anke},
  title     = {Galactic archaeology with the oldest stars in the Milky Way},
  doi       = {10.25932/publishup-47602},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476022},
  school      = {Universit{\"a}t Potsdam},
  year      = {2020},
  abstract  = {In einer dunklen Nacht kann man tausende Sterne sehen. All diese Sterne befinden sich innerhalb der Milchstraße, unsere Heimatgalaxie. Nicht alle Sterne sind gleich, sie k{\"o}nnen zum Beispiel unterschiedliche Gr{\"o}ßen, Massen, Temperaturen und Alter haben. Die schwereren Sterne leben (aus astronomischer Sicht) nicht lange, nur wenige Millionen Jahren, aber Sterne kleiner als die Sonne k{\"o}nnen mehr als zehn Milliarden Jahren alt werden. Kleine Sterne die ganz am Anfang des Universums entstanden sind leuchten immer noch. Diese uralten Sterne sind sehr hilfreich um mehr {\"u}ber das fr{\"u}he Universum, die erste Sterne und die Geschichte der Milchstraße zu erfahren. Aber wie erkennt man uralte Sterne? Anhand ihrer chemischen Fingerabdr{\"u}cke! Am Anfang des Universums gab es nur zwei chemische Elemente: Wasserstoff und Helium (und ein klein bisschen Lithium). Alle schwereren Elementen wie zum Beispiel Kohlenstoff, Kalzium und Eisen sind erst sp{\"a}ter innerhalb von Sternen und in Sternexplosionen entstanden. Je mehr Sternen geboren werden, sich entwickeln und explodieren, desto mehr chemische Elemente gibt es im Universum. Sterne die sp{\"a}ter entstehen werden mit einer gr{\"o}ßeren Menge an schweren Elementen, beziehungsweise einer gr{\"o}ßeren Metallizit{\"a}t, geboren. Im Bereich der Astronomie der sich „Galaktische Arch{\"a}ologie" nennt benutzt man Sterne mit unterschiedlichen Metallizit{\"a}ten um die Geschichte der Milchstraße zu erforschen. In dieser Doktorarbeit liegt der Fokus auf den metallarmen Sterne, da man erwartet dass diese Sterne am {\"a}ltesten sind und uns deswegen viel {\"u}ber die fr{\"u}he Geschichte erz{\"a}hlen k{\"o}nnen. Bis heute haben wir noch keinen metallfreien Stern entdeckt, aber die metall{\"a}rmsten Sterne geben uns wichtige Einblicke in das Leben und Sterben der ersten Sterne. Viele von diesen {\"a}ltesten, metall{\"a}rmsten Sternen haben unerwartet viel Kohlenstoff im Vergleich zu zum Beispiel Eisen. Diese kohlenstoffreichen, metallarmen Sterne (CEMP Sterne) erz{\"a}hlen uns etwas {\"u}ber die allerersten Sterne im Universum: sie haben relativ viel Kohlenstoff produziert. Wenn wir uns die genauen chemischen Fingerabdr{\"u}cke von CEMP Sterne angucken, erz{\"a}hlen sie uns noch viel mehr. Aber unsere Interpretation h{\"a}ngt von der Annahme ab, dass der chemische Fingerabdruck sich w{\"a}hrend des Lebens eines Sternes nicht ge{\"a}ndert hat. In dieser Dissertation werden neue Daten pr{\"a}sentiert die zeigen dass diese Annahme vielleicht zu einfach ist: viele extrem metallarme CEMP Sterne befinden sich in Doppelsternsystemen. Interaktion zwischen zwei Sternen in einem Doppelsternsystem k{\"o}nnte die Oberfl{\"a}che von CEMP Sternen verschmutzt haben. Zwar wurden die meisten CEMP Sterne h{\"o}chstwahrscheinlich nicht verschmutzt, aber wir sollten vorsichtig sein mit unserer Interpretation. Die CEMP Sterne und andere metallarme Sterne sind auch wichtig f{\"u}r unser Verst{\"a}ndnis der fr{\"u}hen Geschichte der Milchstraße. Die meisten Forscher, die metallarme Sterne studieren, suchen diese Sterne im Halo der Milchstraße: einer riesigen, diffuse Komponente die ungef{\"a}hr 1\% der Sterne in unserer Galaxie enth{\"a}lt. Modelle sagen aber vorher dass die {\"a}ltesten metallarmen Sterne sich im Zentrum der Milchstraße befinden (im „Bulge"). Das Zentrum ist leider, wegen großer Mengen Staub zwischen uns und dem Zentrum und einer {\"u}berw{\"a}ltigenden Mehrheit an metallreichen Sternen, schwierig zu beobachten. Diese Dissertation pr{\"a}sentiert Ergebnisse des „Pristine Inner Galaxy Survey" (PIGS), einer neuen Himmelsdurchmusterung, die die {\"a}ltesten Sterne im Bulge der Milchstraße sucht (und findet). PIGS benutzt Bilder mit einer Farbe, die f{\"u}r die Metallizit{\"a}t der Sterne empfindlich ist, und kann deswegen sehr effektiv die metallarmen Sterne aus Millionen anderer Sterne ausw{\"a}hlen. Von interessanten Kandidaten wurden Spektren aufgenommen und mit zwei unabh{\"a}ngigen Methoden analysiert. Mit dieser Strategie hat PIGS die bislang gr{\"o}ßte Anzahl an metallarmen Sternen in der inneren Galaxie entdeckt. Ein neues Ergebnis aus den PIGS Daten ist, dass die metall{\"a}rmeren Sterne langsamer um das Galaktische Zentrum drehen als die metallreichen Sterne, und dass sie mehr willk{\"u}rliche Bewegung zeigen. Eine zweite wichtige Leistung von PIGS ist die Entdeckung von dutzenden CEMP Sternen in der innere Galaxie, wo vorher nur zwei bekannt waren. Die neuen Ergebnisse aus dieser Dissertation helfen uns die ersten Sterne und die Geschichte der Milchstraße besser zu verstehen. Laufende und neue Himmelsdurchmusterungen in den n{\"a}chsten Jahren werden uns noch viel mehr Informationen geben: es ist eine aufregende Zeit f{\"u}r die Galaktische Arch{\"a}ologie.},
  language  = {en}
}
@phdthesis{Aneley2020,
  author    = {Aneley, Gedif Mulugeta},
  title     = {Drought tolerance prediction of potato by automatic phenotyping of morphological and physiological traits},
  doi       = {10.25932/publishup-48683},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-486836},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xi, 176},
  year      = {2020},
  abstract  = {Potato is the 4th most important food crop in the world. Especially in tropical and sub-tropical potato production, drought is a yield limiting factor. Potato is sensitive to water stress. Potato yield loss under water stress could be reduced by using tolerant varieties and adjusted agronomic practices. Direct selection for yield under water-stressed conditions requires long selection cycles. Thus, identification of markers for marker-assisted selection may speed up breeding. The objective of this thesis is to identify morphological markers for drought tolerance by continuously monitoring plant growth and canopy temperature with an automatic phenotyping system. The phenotyping was performed in drought-stress experiments that were conducted in population A with 64 genotypes and population B with 21 genotypes in the screenhouse in 2015 and 2016 (population A) and in 2017 and 2018 (population B). Drought tolerance was quantified as deviation of the relative tuber starch yield from the experimental median (DRYM) and parent median (DRYMp). Relative tuber starch yield is starch yield under drought stress relative to the average starch yield of the respective cultivar under control conditions in the same experiment. The specific DRYM value was calculated based on the yield data of the same experiment or the global DRYM that was calculated from yield data derived from data combined over yeas of respective population or across multiple experiments including VALDIS and TROST experiments (2011-2016). Analysis of variance found a significant effect of genotype on DRYM indicating that the tolerance variation required for marker identification was given in both populations. Canopy growth was monitored continuously six times a day over five to ten weeks by a laser scanner system and yielded information on leaf area, plant height and leaf angle for population A and additionally on leaf inclination and light penetration depth for population B. Canopy temperature was measured 48 times a day over six to seven weeks by infrared thermometry in population B. From the continuous IRT surface temperature data set, the canopy temperature for each plant was selected by matching the time stamp of the IRT data with laser scanner data. Mean, maximum, range and growth rate values were calculated from continuous laser scanner measurements of respective canopy parameters. Among the canopy parameters, the maximum and mean values in long-term stress conditions showed better correlation with DRYM values calculated in the same experiment than growth rate and diurnal range values. Therefore, drought tolerance index prediction was done from maximum and mean values of canopy parameters. The tolerance index in specific experiment condition was linearly predicted by simple regression model from different single canopy parameters under long-term stress condition in population A (2016) and population B (2017 and 2018). Among the canopy parameters maximum light penetration depth (2017), mean leaf angle (2017, 2018, and 2016), mean leaf inclination or mean canopy temperature depression (2017 and 2018), maximum plant height (2017) were selected as tolerance predictors. However, no single parameters were sufficient to predict DRYM. Therefore, several independent parameters were integrated in a multiple regression model. In multiple regression model, specific experiment DRYM values in population A was predicted from mean leaf angle (2016). In population B, specific tolerance could be predicted from maximum light penetration depth and mean leaf inclination (2017) and mean leaf inclination (2018) or mean canopy temperature depression and mean leaf angle (2018). In data combined over season of population A, the multiple linear regression model selected maximum plant height and mean leaf angle as tolerance predictor. In Population B, mean leaf inclination was selected as tolerance predictor. However, in population A, the variation explained by the final model was too low. Furthermore, the average tolerances respective to parent median (2011-2018) across FGH plants or all plants (FGH and field) were predicted from maximum plant height (population A) and maximum plant height and mean leaf inclination (population B). Altogether, canopy parameters could be used as markers for drought tolerance. Therefore, water stress breeding in potato could be speed up through using leaf inclination, light penetration depth, plant height and canopy temperature depression as markers for drought tolerance, especially in long-term stress conditions.},
  language  = {en}
}
@phdthesis{Anda2020,
  author    = {Anda, Carolin},
  title     = {Reisen mit/durch/auf Facebook},
  doi       = {10.25932/publishup-62489},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-624896},
  school      = {Universit{\"a}t Potsdam},
  pages     = {237},
  year      = {2020},
  abstract  = {Die vorliegende Arbeit untersucht Urlaubsfotografien bei Facebook und beschreibt, welche sozio-technischen Medienpraktiken sich innerhalb der Social-Media Plattform {\"u}ber die Fotografien vollziehen. Fotografische Praktiken sind durch aktive Handlungen und soziale Gebrauchsweisen bestimmt. Urlaubsfotografien tragen zum Beispiel zur Strukturierung von Reiserouten und Vorstellungen bei, indem genrespezifische Motive und Rahmungen mit Hilfe von Medien reproduziert und wiederholt werden. Praktiken des Zeigens, Teilens und Kommunizierens werden durch Social Plug-Ins (Like/Share Buttons) und Tagging-Funktionen auch in die Benutzeroberfl{\"a}chen von Facebook integriert. Dadurch werden Nutzer*innen Aktivit{\"a}ten und technische Prozesse miteinander verbunden. Am Beispiel der automatischen Generierung von Urlaubsfotografien auf Geotagseiten wird gezeigt, dass Social-Tagging zur Entstehung und Aushandlung geographischer R{\"a}ume und Ortsvorstellungen beitr{\"a}gt. Mithilfe technischer Strukturierungen von Fotografien auf Taggingseiten werden genrespezifische Motive, fotografische Trends und {\"A}sthetiken besonders sichtbar. Allerdings wird ihre Visualisierung auch durch algorithmische Priorisierung einzelner Inhalte mitbestimmt. Dadurch werden Urlaubsfotografien f{\"u}r ein fotografisches Profiling genutzt, da sie das algorithmische Erfassen und Auswerten von Nutzer*innen-Informationen erm{\"o}glichen. Die Arbeit zeigt, dass der Einsatz von Bilderkennungsverfahren und fotografischen Datenanalysen zu einer optimierten Informationsgewinnung und zu einer Standardisierung von Fotografien beitr{\"a}gt.},
  language  = {de}
}
@phdthesis{Amaechi2020,
  author    = {Amaechi, Mary Chimaobi},
  title     = {A'-movement dependencies and their reflexes in Igbo},
  doi       = {10.25932/publishup-47152},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-471524},
  school      = {Universit{\"a}t Potsdam},
  pages     = {i, 195},
  year      = {2020},
  abstract  = {In this thesis, I examine different A-bar movement dependencies in Igbo, a Benue-Congo language spoken in southern Nigeria. Movement dependencies are found in constructions where an element is moved to the left edge of the clause to express information-structural categories such as in questions, relativization and focus. I show that these constructions in Igbo are very uniform from a syntactic point of view. The constructions are built on two basic fronting operations: relativization and focus movement, and are biclausal. I further investigate several morphophonological effects that are found in these A-bar constructions. I propose that these effects are reflexes of movement that are triggered when an element is moved overtly in relativization or focus. This proposal helps to explain the tone patterns that have previously been assumed to be a property of relative clauses. The thesis adds to the growing body of tonal reflexes of A-bar movement reported for a few African languages. The thesis also provides an insight into the complementizer domain (C-domain) of Igbo.},
  language  = {en}
}