@phdthesis{Roessler2006,
  author    = {R{\"o}ßler, Dirk},
  title     = {Retrieval of earthquake source parameters in inhomogeneous anisotropic mediawith application to swarm events in West Bohemia in 2000},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-7758},
  school      = {Universit{\"a}t Potsdam},
  year      = {2006},
  abstract  = {Earthquakes form by sudden brittle failure of rock mostly as shear ruptures along a rupture plane. Beside this, mechanisms other than pure shearing have been observed for some earthquakes mainly in volcanic areas. Possible explanations include complex rupture geometries and tensile earthquakes. Tensile earthquakes occur by opening or closure of cracks during rupturing. They are likely to be often connected with fluids that cause pressure changes in the pore space of rocks leading to earthquake triggering. Tensile components have been reported for swarm earthquakes in West Bohemia in 2000. The aim and subject of this work is an assessment and the accurate determination of such tensile components for earthquakes in anisotropic media. Currently used standard techniques for the retrieval of earthquake source mechanisms assume isotropic rock properties. By means of moment tensors, equivalent forces acting at the source are used to explain the radiated wavefield. Conversely, seismic anisotropy, i.e. directional dependence of elastic properties, has been observed in the earth's crust and mantle such as in West Bohemia. In comparison to isotropy, anisotropy causes modifications in wave amplitudes and shear-wave splitting. In this work, effects of seismic anisotropy on true or apparent tensile source components of earthquakes are investigated. In addition, earthquake source parameters are determined considering anisotropy. It is shown that moment tensors and radiation patterns due to shear sources in anisotropic media may be similar to those of tensile sources in isotropic media. In contrast, similarities between tensile earthquakes in anisotropic rocks and shear sources in isotropic media may exist. As a consequence, the interpretation of tensile source components is ambiguous. The effects that are due to anisotropy depend on the orientation of the earthquake source and the degree of anisotropy. The moment of an earthquake is also influenced by anisotropy. The orientation of fault planes can be reliably determined even if isotropy instead of anisotropy is assumed and if the spectra of the compressional waves are used. Greater difficulties may arise when the spectra of split shear waves are additionally included. Retrieved moment tensors show systematic artefacts. Observed tensile source components determined for events in West Bohemia in 1997 can only partly be attributed to the effects of moderate anisotropy. Furthermore, moment tensors determined earlier for earthquakes induced at the German Continental Deep Drilling Program (KTB), Bavaria, were reinterpreted under assumptions of anisotropic rock properties near the borehole. The events can be consistently identified as shear sources, although their moment tensors comprise tensile components that are considered to be apparent. These results emphasise the necessity to consider anisotropy to uniquely determine tensile source parameters. Therefore, a new inversion algorithm has been developed, tested, and successfully applied to 112 earthquakes that occurred during the most recent intense swarm episode in West Bohemia in 2000 at the German-Czech border. Their source mechanisms have been retrieved using isotropic and anisotropic velocity models. Determined local magnitudes are in the range between 1.6 and 3.2. Fault-plane solutions are similar to each other and characterised by left-lateral faulting on steeply dipping, roughly North-South oriented rupture planes. Their dip angles decrease above a depth of about 8.4km. Tensile source components indicating positive volume changes are found for more than 60\% of the considered earthquakes. Their size depends on source time and location. They are significant at the beginning of the swarm and at depths below 8.4km but they decrease in importance later in the course of the swarm. Determined principle stress axes include P axes striking Northeast and Taxes striking Southeast. They resemble those found earlier in Central Europe. However, depth-dependence in plunge is observed. Plunge angles of the P axes decrease gradually from 50° towards shallow angles with increasing depth. In contrast, the plunge angles of the T axes change rapidly from about 8° above a depth of 8.4km to 21° below this depth. By this thesis, spatial and temporal variations in tensile source components and stress conditions have been reported for the first time for swarm earthquakes in West Bohemia in 2000. They also persist, when anisotropy is assumed and can be explained by intrusion of fluids into the opened cracks during tensile faulting.},
  subject      = {Seismologie},
  language  = {en}
}
@misc{RoesslerKruegerOhrnberger2007,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture propagation of recent large TsE off-coast Sumatra and Java},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-13039},
  year      = {2007},
  abstract  = {The spatio-temporal evolution of the three recent tsunamogenic earthquakes (TsE) off-coast N-Sumatra (Mw9.3), 28/03/2005 (Mw8.5) off-coast Nias, on 17/07/2006 (Mw7.7) off-coast Java. Start time, duration, and propagation of the rupture are retrieved. All parameters can be obtained rapidly after recording of the first-arrival phases in near-real time processing. We exploit semblance analysis, backpropagation and broad-band seismograms within 30°-95° distance. Image enhancement is reached by stacking the semblance of arrays within different directions. For the three events, the rupture extends over about 1150, 150, and 200km, respectively. The events in 2004, 2005, and 2006 had source durations of at least 480s, 120s, and 180s, respectively. We observe unilateral rupture propagation for all events except for the rupture onset and the Nias event, where there is evidence for a bilateral start of the rupture. Whereas average rupture speed of the events in 2004 and 2005 is in the order of the S-wave speed (≈2.5-3km/s), unusually slow rupturing (≈1.5 km/s) is indicated for the July 2006 event. For the July 2006 event we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power generally increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.},
  language  = {en}
}
@article{RoesslerKruegerOhrnberger2007,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture propagation of the TsE (Mw7.7) on 17 July 2006 off-coast Java},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-12964},
  year      = {2007},
  abstract  = {The Mw=7.7 tsunamogenic earthquake (TsE) on 17 July 2006, 08:19:28 shock the Indian Ocean at about 15 km depth off-coast Java, Indonesia. It caused a local tsunami with wave heights exceeding 2 m. The death toll reached several hundred. Thousands of people were displaced. By means of standard array methods, we have investigated the propagation and the extent of the rupture front of the causative earthquake. Waveform similarity is expressed by means of the semblance. We back-propagate the semblance for first-arrival phases recorded at broad-band stations within teleseismic distances (30°-95°). Image enhancement is realised by stacking the semblance of 8 arrays within different epicentral and azimuthal directions. From teleseismic observations we find rupturing of a 200 x 100 km wide area in at least 2 phases with propagation from NW to SE and source duration >125 s. The event has some characteristics of a circular rupture followed by unilateral faulting with change in slip rate. Unusually slow rupturing (≈1.5 km/s) is indicated. Fault area and aftershock distribution coincide. Spatial and temporal resolution are frequency dependent. Studies of a Mw6.0 earthquake on 2006/09/21 and one synthetic source show a ≈1° limit in resolution. Retrieved source area, source duration as well as peak values for semblance and beam power increase with the size of the earthquake making possible an automatic detection and classification of large and small earthquakes.},
  language  = {en}
}
@misc{RoesslerKruegerOhrnberger2008,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias},
  title     = {Rupture Propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-29195},
  year      = {2008},
  abstract  = {We study the rupture propagation of the 2008/05/12 Ms8.0 Wenchuan Earthquake. We apply array techniques such as semblance vespagram analysis to P waves recorded at seismic broadband station within 30-100° epicentral distance. By combination of multiple large aperture station groups spatial and temporal resolution is enhanced and problems due source directivity and source mechanism are avoided. We find that seismic energy was released for at least 110 s. Propagating unilaterally at sub-shear rupture velocity of about 2.5 km/s in NE direction, the earthquake reaches a lateral extent of more than 300 km. Whereas high semblance during within 70 s from rupture start indicates simple propagation more complex source processes are indicated thereafter by decreases coherency in seismograms. At this stage of the event coherency is low but significantly above noise level. We emphasize that first result of our computations where obtain within 30 minutes after source time by using an atomized algorithm. This procedure has been routinely and globally applied to major earthquakes. Results are made public through internet.},
  language  = {en}
}
@misc{RoesslerKruegerOhrnbergeretal.2008,
  author    = {R{\"o}ßler, Dirk and Kr{\"u}ger, Frank and Ohrnberger, Matthias and Ehlert, Lutz},
  title     = {Automatic near real-time characterisation of large earthquakes},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-20191},
  year      = {2008},
  abstract  = {An der Universit{\"a}t Potsdam wird seit 2008 ein automatisiertes Verfahren angewandt, um Bruchparamter großer Erdbeben in quasi-Echtzeit, d.h. wenige Minuten nachdem sich das Beben ereignet hat, zu bestimmen und der {\"O}ffentlichkeit via Internet zur Verf{\"u}gung zu stellen. Es ist vorgesehen, das System in das Deutsch-Indonesische Tsunamifr{\"u}hwarnsystem (GITEWS) zu integrieren, f{\"u}r das es speziell konfiguriert ist. Wir bestimmen insbesondere die Dauer und die Ausdehnung des Erdbebens, sowie dessen Bruchgeschwindigkeit und -richtung. Dabei benutzen wir die Seismogramme der zuerst eintreffenden P Wellen vom Breitbandstationen in teleseimischer Entfernung vom Beben sowie herk{\"o}mmliche Arrayverfahren in teilweise modifizierter Form. Die Semblance wir als {\"A}hnlichkeitsmaß verwendet, um Seismogramme eines Stationsnetzes zu vergleichen. Im Falle eines Erdbebens ist die Semblance unter Ber{\"u}cksichtigung des Hypozentrums zur Herdzeit und w{\"a}hrend des Bruchvorgangs deutlich zeitlich und r{\"a}umlich erh{\"o}ht und konzentriert. Indem wir die Ergebnisse verschiedener Stationsnetzwerke kombinieren, erreichen wir Unabh{\"a}ngigkeit von der Herdcharakteristik und eine raum-zeitliche Aufl{\"o}sung, die es erlaubt die o.g. Parameter abzuleiten. In unserem Beitrag skizzieren wir die Methode. Anhand der beiden M8.0 Benkulu Erdbeben (Sumatra, Indonesien) vom 12.09.2007 und dem M8.0 Sichuan Ereignis (China) vom 12.05.2008 demonstrieren wir Aufl{\"o}sungsm{\"o}glichkeiten und vergleichen die Ergebnisse der automatisierten Echtzeitanwendung mit nachtr{\"a}glichen Berechnungen. Weiterhin stellen wir eine Internetseite zur Verf{\"u}gung, die die Ergebnisse pr{\"a}sentiert und animiert. Diese kann z.B. in geowissenschaftlichen Einrichtungen an Computerterminals gezeigt werden. Die Internetauftritte haben die folgenden Adressen: http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack/openday http://www.geo.uni-potsdam.de/arbeitsgruppen/Geophysik_Seismologie/forschung/ruptrack},
  language  = {en}
}
@phdthesis{Sharma2024,
  author    = {Sharma, Shubham},
  title     = {Integrated approaches to earthquake forecasting},
  doi       = {10.25932/publishup-63612},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-636125},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xvi, 76},
  year      = {2024},
  abstract  = {A comprehensive study on seismic hazard and earthquake triggering is crucial for effective mitigation of earthquake risks. The destructive nature of earthquakes motivates researchers to work on forecasting despite the apparent randomness of the earthquake occurrences. Understanding their underlying mechanisms and patterns is vital, given their potential for widespread devastation and loss of life. This thesis combines methodologies, including Coulomb stress calculations and aftershock analysis, to shed light on earthquake complexities, ultimately enhancing seismic hazard assessment. The Coulomb failure stress (CFS) criterion is widely used to predict the spatial distributions of aftershocks following large earthquakes. However, uncertainties associated with CFS calculations arise from non-unique slip inversions and unknown fault networks, particularly due to the choice of the assumed aftershocks (receiver) mechanisms. Recent studies have proposed alternative stress quantities and deep neural network approaches as superior to CFS with predefined receiver mechanisms. To challenge these propositions, I utilized 289 slip inversions from the SRCMOD database to calculate more realistic CFS values for a layered-half space and variable receiver mechanisms. The analysis also investigates the impact of magnitude cutoff, grid size variation, and aftershock duration on the ranking of stress metrics using receiver operating characteristic (ROC) analysis. Results reveal the performance of stress metrics significantly improves after accounting for receiver variability and for larger aftershocks and shorter time periods, without altering the relative ranking of the different stress metrics. To corroborate Coulomb stress calculations with the findings of earthquake source studies in more detail, I studied the source properties of the 2005 Kashmir earthquake and its aftershocks, aiming to unravel the seismotectonics of the NW Himalayan syntaxis. I simultaneously relocated the mainshock and its largest aftershocks using phase data, followed by a comprehensive analysis of Coulomb stress changes on the aftershock planes. By computing the Coulomb failure stress changes on the aftershock faults, I found that all large aftershocks lie in regions of positive stress change, indicating triggering by either co-seismic or post-seismic slip on the mainshock fault. Finally, I investigated the relationship between mainshock-induced stress changes and associated seismicity parameters, in particular those of the frequency-magnitude (Gutenberg-Richter) distribution and the temporal aftershock decay (Omori-Utsu law). For that purpose, I used my global data set of 127 mainshock-aftershock sequences with the calculated Coulomb Stress (ΔCFS) and the alternative receiver-independent stress metrics in the vicinity of the mainshocks and analyzed the aftershocks properties depend on the stress values. Surprisingly, the results show a clear positive correlation between the Gutenberg-Richter b-value and induced stress, contrary to expectations from laboratory experiments. This observation highlights the significance of structural heterogeneity and strength variations in seismicity patterns. Furthermore, the study demonstrates that aftershock productivity increases nonlinearly with stress, while the Omori-Utsu parameters c and p systematically decrease with increasing stress changes. These partly unexpected findings have significant implications for future estimations of aftershock hazard. The findings in this thesis provides valuable insights into earthquake triggering mechanisms by examining the relationship between stress changes and aftershock occurrence. The results contribute to improved understanding of earthquake behavior and can aid in the development of more accurate probabilistic-seismic hazard forecasts and risk reduction strategies.},
  language  = {en}
}
@phdthesis{Shirzaei2010,
  author    = {Shirzaei, Manoochehr},
  title     = {Crustal deformation source monitoring using advanced InSAR time series and time dependent inverse modeling},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-50774},
  school      = {Universit{\"a}t Potsdam},
  year      = {2010},
  abstract  = {Crustal deformation can be the result of volcanic and tectonic activity such as fault dislocation and magma intrusion. The crustal deformation may precede and/or succeed the earthquake occurrence and eruption. Mitigating the associated hazard, continuous monitoring of the crustal deformation accordingly has become an important task for geo-observatories and fast response systems. Due to highly non-linear behavior of the crustal deformation fields in time and space, which are not always measurable using conventional geodetic methods (e.g., Leveling), innovative techniques of monitoring and analysis are required. In this thesis I describe novel methods to improve the ability for precise and accurate mapping the spatiotemporal surface deformation field using multi acquisitions of satellite radar data. Furthermore, to better understand the source of such spatiotemporal deformation fields, I present novel static and time dependent model inversion approaches. Almost any interferograms include areas where the signal decorrelates and is distorted by atmospheric delay. In this thesis I detail new analysis methods to reduce the limitations of conventional InSAR, by combining the benefits of advanced InSAR methods such as the permanent scatterer InSAR (PSI) and the small baseline subsets (SBAS) with a wavelet based data filtering scheme. This novel InSAR time series methodology is applied, for instance, to monitor the non-linear deformation processes at Hawaii Island. The radar phase change at Hawaii is found to be due to intrusions, eruptions, earthquakes and flank movement processes and superimposed by significant environmental artifacts (e.g., atmospheric). The deformation field, I obtained using the new InSAR analysis method, is in good agreement with continuous GPS data. This provides an accurate spatiotemporal deformation field at Hawaii, which allows time dependent source modeling. Conventional source modeling methods usually deal with static deformation field, while retrieving the dynamics of the source requires more sophisticated time dependent optimization approaches. This problem I address by combining Monte Carlo based optimization approaches with a Kalman Filter, which provides the model parameters of the deformation source consistent in time. I found there are numerous deformation sources at Hawaii Island which are spatiotemporally interacting, such as volcano inflation is associated to changes in the rifting behavior, and temporally linked to silent earthquakes. I applied these new methods to other tectonic and volcanic terrains, most of which revealing the importance of associated or coupled deformation sources. The findings are 1) the relation between deep and shallow hydrothermal and magmatic sources underneath the Campi Flegrei volcano, 2) gravity-driven deformation at Damavand volcano, 3) fault interaction associated with the 2010 Haiti earthquake, 4) independent block wise flank motion at the Hilina Fault system, Kilauea, and 5) interaction between salt diapir and the 2005 Qeshm earthquake in southern Iran. This thesis, written in cumulative form including 9 manuscripts published or under review in peer reviewed journals, improves the techniques for InSAR time series analysis and source modeling and shows the mutual dependence between adjacent deformation sources. These findings allow more realistic estimation of the hazard associated with complex volcanic and tectonic systems.},
  language  = {en}
}
@phdthesis{Zoeller1999,
  author    = {Z{\"o}ller, Gert},
  title     = {Analyse raumzeitlicher Muster in Erdbebendaten},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-0000122},
  school      = {Universit{\"a}t Potsdam},
  year      = {1999},
  abstract  = {Die vorliegende Arbeit besch{\"a}ftigt sich mit der Charakterisierung von Seismizit{\"a}t anhand von Erdbebenkatalogen. Es werden neue Verfahren der Datenanalyse entwickelt, die Aufschluss dar{\"u}ber geben sollen, ob der seismischen Dynamik ein stochastischer oder ein deterministischer Prozess zugrunde liegt und was daraus f{\"u}r die Vorhersagbarkeit starker Erdbeben folgt. Es wird gezeigt, dass seismisch aktive Regionen h{\"a}ufig durch nichtlinearen Determinismus gekennzeichent sind. Dies schließt zumindest die M{\"o}glichkeit einer Kurzzeitvorhersage ein. Das Auftreten seismischer Ruhe wird h{\"a}ufig als Vorl{\"a}uferphaenomen f{\"u}r starke Erdbeben gedeutet. Es wird eine neue Methode pr{\"a}sentiert, die eine systematische raumzeitliche Kartierung seismischer Ruhephasen erm{\"o}glicht. Die statistische Signifikanz wird mit Hilfe des Konzeptes der Ersatzdaten bestimmt. Als Resultat erh{\"a}lt man deutliche Korrelationen zwischen seismischen Ruheperioden und starken Erdbeben. Gleichwohl ist die Signifikanz daf{\"u}r nicht hoch genug, um eine Vorhersage im Sinne einer Aussage {\"u}ber den Ort, die Zeit und die St{\"a}rke eines zu erwartenden Hauptbebens zu erm{\"o}glichen.},
  language  = {en}
}