@misc{SchildePazOrtiz2017,
  author    = {Schilde, Uwe and Paz, Christian and Ortiz, Leandro},
  title     = {Crystal structure of erioflorin isolated from Podanthus mitiqui (L.)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-401832},
  pages     = {4},
  year      = {2017},
  abstract  = {The title compound, erioflorin, C19H24O6 [systematic name: (1aR,3S,4Z,5aR,8aR,9R,10aR)-1a, 2,3,5a, 7,8,8a, 9,10,10a-decahydro-3-hydroxy-4,10a-dimethyl-8-methylidene-7-oxooxireno[5,6] cyclodeca[1,2-b]furan-9-yl methacrylate], is a tricyclic germacrane sesquiterpene lactone, which was isolated from Podanthus mitiqui (L.). The compound crystallizes in the space group P2(1)2(1)2(1), and its molecular structure consists of a methacrylic ester of a ten-membered ring sesquiterpenoid annelated with an epoxide and a butyrolactone. The structure is stabilized by one intramolecular C-H center dot center dot center dot O hydrogen bond. An O-H center dot center dot center dot O hydrogen bond and further C-H center dot center dot center dot O interactions can be observed in the packing.},
  language  = {en}
}
@misc{KoenigKellingSchildeetal.2017,
  author    = {K{\"o}nig, Jana and Kelling, Alexandra and Schilde, Uwe and Strauch, Peter},
  title     = {[µ2-O,O′,Oʺ,Oʺ′-Bis(1,2-dithiooxalato-S,S′)nickel(II)]bis[-O,O′-bis(1,2-dithiooxalato-S,S′)-nickel(II)pentaquaholmium(III)]hydrate, [Ho2Ni3(dto)6(H2O)10]},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400598},
  pages     = {5},
  year      = {2017},
  abstract  = {Planar bis(1,2-dithiooxalato)nickelate(II), [Ni(dto)]2- reacts in aqueous solutions with lanthanide ions (Ln3+) to form pentanuclear, hetero-bimetallic complexes of the general composition [{Ln(H2O)n}2{Ni(dto)2}3]·xH2O. (n = 4 or 5; x = 9-12). The complex [{Ho(H2O)5}2{Ni(dto)2}3]·10H2O, Ho2Ni3, was synthesized and characterized by single crystal X-ray structure analysis and powder diffraction. The Ho2Ni3 complex crystallizes as monoclinic crystals in the space group P21/c. The channels and cavities, appearing in the crystal packing of the complex molecules, are occupied by a varying amount of non-coordinated water molecules.},
  language  = {en}
}
@misc{AdamovichMirskovaMirskovetal.2017,
  author    = {Adamovich, Sergey N. and Mirskova, Anna N. and Mirskov, Rudolf G. and Schilde, Uwe},
  title     = {Synthesis and crystal structure of 1,4,10,13-tetraoxa-7,16-diazoniumcyclo-octadecane bis(4-chloro-2-methyl-phenoxyacetate)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400905},
  pages     = {4},
  year      = {2017},
  abstract  = {The title compound was prepared by the reaction of 1,4,10,13-tetraoxa-7,16-diazacyclo-octadecane with 4-chloro-2-methyl-phenoxyacetic acid in a ratio of 1:2. The structure has been proved by the data of elemental analysis, IR spectroscopy, NMR ( 1 H, 13 C) technique and by X-ray diffraction analysis. Intermolecular hydrogen bonds between the azonium protons and oxygen atoms of the carboxylate groups were found. Immunoactive properties of the title compound have been screened. The compound has the ability to suppress spontaneous and Con A-stimulated cell proliferation in vitro and therefore can be considered as immunodepressant.},
  language  = {en}
}
@misc{ZehbeKolloscheLardongetal.2017,
  author    = {Zehbe, Kerstin and Kollosche, Matthias and Lardong, Sebastian and Kelling, Alexandra and Schilde, Uwe and Taubert, Andreas},
  title     = {Ionogels based on poly(methyl methacrylate) and metal-containing ionic liquids},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400607},
  pages     = {16},
  year      = {2017},
  abstract  = {Ionogels (IGs) based on poly(methyl methacrylate) (PMMA) and the metal-containing ionic liquids (ILs) bis-1-butyl-3-methlimidazolium tetrachloridocuprate(II), tetrachloride cobaltate(II), and tetrachlorido manganate(II) have been synthesized and their mechanical and electrical properties have been correlated with their microstructure. Unlike many previous examples, the current IGs show a decreasing stability in stress-strain experiments on increasing IL fractions. The conductivities of the current IGs are lower than those observed in similar examples in the literature. Both effects are caused by a two-phase structure with micrometer-sized IL-rich domains homogeneously dispersed an IL-deficient continuous PMMA phase. This study demonstrates that the IL-polymer miscibility and the morphology of the IGs are key parameters to control the (macroscopic) properties of IGs.},
  language  = {en}
}
@misc{EnzenbergLaschewskyBoeffeletal.2017,
  author    = {Enzenberg, Anne and Laschewsky, Andr{\´e} and Boeffel, Christine and Wischerhoff, Erik},
  title     = {Influence of the near molecular vicinity on the temperature regulated fluorescence response of poly(N-vinylcaprolactam)},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400634},
  pages     = {21},
  year      = {2017},
  abstract  = {A series of new fluorescent dye bearing monomers, including glycomonomers, based on maleamide and maleic esteramide was synthesized. The dye monomers were incorporated by radical copolymerization into thermo-responsive poly(N-vinyl-caprolactam) that displays a lower critical solution temperature (LCST) in aqueous solution. The effects of the local molecular environment on the polymers' luminescence, in particular on the fluorescence intensity and the extent of solvatochromism, were investigated below as well as above the phase transition. By attaching substituents of varying size and polarity in the close vicinity of the fluorophore, and by varying the spacer groups connecting the dyes to the polymer backbone, we explored the underlying structure-property relationships, in order to establish rules for successful sensor designs, e.g., for molecular thermometers. Most importantly, spacer groups of sufficient length separating the fluorophore from the polymer backbone proved to be crucial for obtaining pronounced temperature regulated fluorescence responses.},
  language  = {en}
}
@misc{TaubertBalischewskiHentrichetal.2017,
  author    = {Taubert, Andreas and Balischewski, Christian and Hentrich, Doreen and Elschner, Thomas and Eidner, Sascha and G{\"u}nter, Christina and Behrens, Karsten and Heinze, Thomas},
  title     = {Water-soluble cellulose derivatives are sustainable additives for biomimetic calcium phosphate mineralization},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400453},
  pages     = {17},
  year      = {2017},
  abstract  = {The effect of cellulose-based polyelectrolytes on biomimetic calcium phosphate mineralization is described. Three cellulose derivatives, a polyanion, a polycation, and a polyzwitterion were used as additives. Scanning electron microscopy, X-ray diffraction, IR and Raman spectroscopy show that, depending on the composition of the starting solution, hydroxyapatite or brushite precipitates form. Infrared and Raman spectroscopy also show that significant amounts of nitrate ions are incorporated in the precipitates. Energy dispersive X-ray spectroscopy shows that the Ca/P ratio varies throughout the samples and resembles that of other bioinspired calcium phosphate hybrid materials. Elemental analysis shows that the carbon (i.e., polymer) contents reach 10\% in some samples, clearly illustrating the formation of a true hybrid material. Overall, the data indicate that a higher polymer concentration in the reaction mixture favors the formation of polymer-enriched materials, while lower polymer concentrations or high precursor concentrations favor the formation of products that are closely related to the control samples precipitated in the absence of polymer. The results thus highlight the potential of (water-soluble) cellulose derivatives for the synthesis and design of bioinspired and bio-based hybrid materials.},
  language  = {en}
}
@misc{SchoenemannLaschewskyRosenhahn2018,
  author    = {Sch{\"o}nemann, Eric and Laschewsky, Andr{\´e} and Rosenhahn, Axel},
  title     = {Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1091},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47305},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473052},
  pages     = {25},
  year      = {2018},
  abstract  = {The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.},
  language  = {en}
}
@misc{SchulzeWehrholdHille2018,
  author    = {Schulze, Sven and Wehrhold, Michel and Hille, Carsten},
  title     = {Femtosecond-pulsed laser written and etched fiber bragg gratings for fiber-optical biosensing},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1073},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47269},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-472692},
  pages     = {22},
  year      = {2018},
  abstract  = {We present the development of a label-free, highly sensitive fiber-optical biosensor for online detection and quantification of biomolecules. Here, the advantages of etched fiber Bragg gratings (eFBG) were used, since they induce a narrowband Bragg wavelength peak in the reflection operation mode. The gratings were fabricated point-by-point via a nonlinear absorption process of a highly focused femtosecond-pulsed laser, without the need of prior coating removal or specific fiber doping. The sensitivity of the Bragg wavelength peak to the surrounding refractive index (SRI), as needed for biochemical sensing, was realized by fiber cladding removal using hydrofluoric acid etching. For evaluation of biosensing capabilities, eFBG fibers were biofunctionalized with a single-stranded DNA aptamer specific for binding the C-reactive protein (CRP). Thus, the CRP-sensitive eFBG fiber-optical biosensor showed a very low limit of detection of 0.82 pg/L, with a dynamic range of CRP detection from approximately 0.8 pg/L to 1.2 µg/L. The biosensor showed a high specificity to CRP even in the presence of interfering substances. These results suggest that the proposed biosensor is capable for quantification of CRP from trace amounts of clinical samples. In addition, the adaption of this eFBG fiber-optical biosensor for detection of other relevant analytes can be easily realized.},
  language  = {en}
}
@misc{SchneiderGuenterTaubert2018,
  author    = {Schneider, Matthias and G{\"u}nter, Christina and Taubert, Andreas},
  title     = {Co-deposition of a hydrogel/calcium phosphate hybrid layer on 3D printed poly(lactic acid) scaffolds via dip coating},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1057},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-47442},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-474427},
  pages     = {21},
  year      = {2018},
  abstract  = {The article describes the surface modification of 3D printed poly(lactic acid) (PLA) scaffolds with calcium phosphate (CP)/gelatin and CP/chitosan hybrid coating layers. The presence of gelatin or chitosan significantly enhances CP co-deposition and adhesion of the mineral layer on the PLA scaffolds. The hydrogel/CP coating layers are fairly thick and the mineral is a mixture of brushite, octacalcium phosphate, and hydroxyapatite. Mineral formation is uniform throughout the printed architectures and all steps (printing, hydrogel deposition, and mineralization) are in principle amenable to automatization. Overall, the process reported here therefore has a high application potential for the controlled synthesis of biomimetic coatings on polymeric biomaterials.},
  language  = {en}
}
@misc{AbbasVranicHoffmannetal.2019,
  author    = {Abbas, Ioana M. and Vranic, Marija and Hoffmann, Holger and El-Khatib, Ahmed H. and Montes-Bay{\´o}n, Mar{\´i}a and M{\"o}ller, Heiko Michael and Weller, Michael G.},
  title     = {Investigations of the Copper Peptide Hepcidin-25 by LC-MS/MS and NMR⁺},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {701},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-42792},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427926},
  year      = {2019},
  abstract  = {Hepcidin-25 was identified as themain iron regulator in the human body, and it by binds to the sole iron-exporter ferroportin. Studies showed that the N-terminus of hepcidin is responsible for this interaction, the same N-terminus that encompasses a small copper(II) binding site known as the ATCUN (amino-terminal Cu(II)- and Ni(II)-binding) motif. Interestingly, this copper-binding property is largely ignored in most papers dealing with hepcidin-25. In this context, detailed investigations of the complex formed between hepcidin-25 and copper could reveal insight into its biological role. The present work focuses on metal-bound hepcidin-25 that can be considered the biologically active form. The first part is devoted to the reversed-phase chromatographic separation of copper-bound and copper-free hepcidin-25 achieved by applying basic mobile phases containing 0.1\% ammonia. Further, mass spectrometry (tandemmass spectrometry (MS/MS), high-resolutionmass spectrometry (HRMS)) and nuclear magnetic resonance (NMR) spectroscopy were employed to characterize the copper-peptide. Lastly, a three-dimensional (3D)model of hepcidin-25with bound copper(II) is presented. The identification of metal complexes and potential isoforms and isomers, from which the latter usually are left undetected by mass spectrometry, led to the conclusion that complementary analytical methods are needed to characterize a peptide calibrant or referencematerial comprehensively. Quantitative nuclear magnetic resonance (qNMR), inductively-coupled plasma mass spectrometry (ICP-MS), ion-mobility spectrometry (IMS) and chiral amino acid analysis (AAA) should be considered among others.},
  language  = {en}
}
@misc{KruegerKellingLinkeretal.2019,
  author    = {Krueger, Tobias and Kelling, Alexandra and Linker, Torsten and Schilde, Uwe},
  title     = {Crystal structures of three cyclohexane‑based γ‑spirolactams},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {738},
  doi       = {10.25932/publishup-43491},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434911},
  pages     = {9},
  year      = {2019},
  abstract  = {The title compounds, 2-azaspiro[4.5]deca-1-one, C₉H₁₅NO, (1a), cis-8-methyl-2-azaspiro[4.5]deca-1-one, C₁₀H₁₇NO, (1b), and trans-8-methyl-2-azaspiro[4.5]deca-1-one, C₁₀H₁₇NO, (1c), were synthesized from benzoic acids 2 in only 3 steps in high yields. Crystallization from n-hexane afforded single crystals, suitable for X-ray diffraction. Thus, the configurations, conformations, and interesting crystal packing effects have been determined unequivocally. The bicyclic skeleton consists of a lactam ring, attached by a spiro junction to a cyclohexane ring. The lactam ring adopts an envelope conformation and the cyclohexane ring has a chair conformation. The main difference between compound 1b and compound 1c is the position of the carbonyl group on the 2-pyrrolidine ring with respect to the methyl group on the 8-position of the cyclohexane ring, which is cis (1b) or trans (1c). A remarkable feature of all three compounds is the existence of a mirror plane within the molecule. Given that all compounds crystallize in centrosymmetric space groups, the packing always contains interesting enantiomer-like pairs. Finally, the structures are stabilized by intermolecular N-H···O hydrogen bonds.},
  language  = {en}
}
@misc{BurekDenglerEmmerlingetal.2019,
  author    = {Burek, Katja and Dengler, Joachim and Emmerling, Franziska and Feldmann, Ines and Kumke, Michael Uwe and Stroh, Julia},
  title     = {Lanthanide Luminescence Revealing the Phase Composition in Hydrating Cementitious Systems},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {808},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-44243},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-442433},
  pages     = {14},
  year      = {2019},
  abstract  = {The hydration process of Portland cement in a cementitious system is crucial for development of the high-quality cement-based construction material. Complementary experiments of X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and time-resolved laser fluorescence spectroscopy (TRLFS) using europium (Eu(III)) as an optical probe are used to analyse the hydration process of two cement systems in the absence and presence of different organic admixtures. We show that different analysed admixtures and the used sulphate carriers in each cement system have a significant influence on the hydration process, namely on the time-dependence in the formation of different hydrate phases of cement. Moreover, the effect of a particular admixture is related to the type of sulphate carrier used. The quantitative information on the amounts of the crystalline cement paste components is accessible via XRD analysis. Distinctly different morphologies of ettringite and calcium-silicate-hydrates (C-S-H) determined by SEM allow visual conclusions about formation of these phases at particular ageing times. The TRLFS data provides information about the admixture influence on the course of the silicate reaction. The dip in the dependence of the luminescence decay times on the hydration time indicates the change in the structure of C-S-H in the early hydration period. Complementary information from XRD, SEM and TRLFS provides detailed information on distinct periods of the cement hydration process.},
  language  = {en}
}
@misc{RajuLiebigHessetal.2019,
  author    = {Raju, Rajarshi Roy and Liebig, Ferenc and Hess, Andreas and Schlaad, Helmut and Koetz, Joachim},
  title     = {Temperature-triggered reversible breakdown of polymer-stabilized olive},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {751},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43646},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436461},
  pages     = {19271 -- 19277},
  year      = {2019},
  abstract  = {A one-step moderate energy vibrational emulsification method was successfully employed to produce thermo-responsive olive/silicone-based Janus emulsions stabilized by poly(N,N-diethylacrylamide) carrying 0.7 mol\% oleoyl side chains. Completely engulfed emulsion droplets remained stable at room temperature and could be destabilized on demand upon heating to the transition temperature of the polymeric stabilizer. Time-dependent light micrographs demonstrate the temperature-induced breakdown of the Janus droplets, which opens new aspects of application, for instance in biocatalysis.},
  language  = {en}
}
@misc{SchwarzeRiemerMuelleretal.2019,
  author    = {Schwarze, Thomas and Riemer, Janine and M{\"u}ller, Holger and John, Leonard and Holdt, Hans-J{\"u}rgen and Wessig, Pablo},
  title     = {Na+ Selective Fluorescent Tools Based on Fluorescence Intensity Enhancements, Lifetime Changes, and on a Ratiometric Response},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1136},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43748},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437482},
  pages     = {13},
  year      = {2019},
  abstract  = {Over the years, we developed highly selective fluorescent probes for K+ in water, which show K+-induced fluorescence intensity enhancements, lifetime changes, or a ratiometric behavior at two emission wavelengths (cf. Scheme 1, K1-K4). In this paper, we introduce selective fluorescent probes for Na+ in water, which also show Na+ induced signal changes, which are analyzed by diverse fluorescence techniques. Initially, we synthesized the fluorescent probes 2, 4, 5, 6 and 10 for a fluorescence analysis by intensity enhancements at one wavelength by varying the Na+ responsive ionophore unit and the fluorophore moiety to adjust different K-d values for an intra- or extracellular Na+ analysis. Thus, we found that 2, 4 and 5 are Na+ selective fluorescent tools, which are able to measure physiologically important Na+ levels at wavelengths higher than 500 nm. Secondly, we developed the fluorescent probes 7 and 8 to analyze precise Na+ levels by fluorescence lifetime changes. Herein, only 8 (K-d=106 mm) is a capable fluorescent tool to measure Na+ levels in blood samples by lifetime changes. Finally, the fluorescent probe 9 was designed to show a Na+ induced ratiometric fluorescence behavior at two emission wavelengths. As desired, 9 (K-d=78 mm) showed a ratiometric fluorescence response towards Na+ ions and is a suitable tool to measure physiologically relevant Na+ levels by the intensity change of two emission wavelengths at 404 nm and 492 nm.},
  language  = {en}
}
@misc{SchoenemannKocAldredetal.2019,
  author    = {Sch{\"o}nemann, Eric and Koc, Julian and Aldred, Nick and Clare, Anthony S. and Laschewsky, Andr{\´e} and Rosenhahn, Axel and Wischerhoff, Erik},
  title     = {Synthesis of novel sulfobetaine polymers with differing dipole orientations in their side chains, and their effects on the antifouling properties},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-52482},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-524820},
  pages     = {9},
  year      = {2019},
  abstract  = {The impact of the orientation of zwitterionic groups, with respect to the polymer backbone, on the antifouling performance of thin hydrogel films made of polyzwitterions is explored. In an extension of the recent discussion about differences in the behavior of polymeric phosphatidylcholines and choline phosphates, a quasi-isomeric set of three poly(sulfobetaine methacrylate)s is designed for this purpose. The design is based on the established monomer 3-[N-2-(methacryloyloxy)ethyl-N,N-dimethyl]ammonio-propane-1-sulfonate and two novel sulfobetaine methacrylates, in which the positions of the cationic and the ionic groups relative to the polymerizable group, and thus also to the polymer backbone, are altered. The effect of the varied segmental dipole orientation on their water solubility, wetting behavior by water, and fouling resistance is compared. As model systems, the adsorption of the model proteins bovine serum albumin (BSA), fibrinogen, and lysozyme onto films of the various polyzwitterion surfaces is studied, as well as the settlement of a diatom (Navicula perminuta) and barnacle cyprids (Balanus improvisus) as representatives of typical marine fouling communities. The results demonstrate the important role of the zwitterionic group's orientation on the polymer behavior and fouling resistance},
  language  = {en}
}
@misc{KirsteBrietzkeHoldtetal.2019,
  author    = {Kirste, Matthias and Brietzke, Thomas Martin and Holdt, Hans-J{\"u}rgen and Schilde, Uwe},
  title     = {The crystal structure of 1,12-diazaperylene, C₁₈H₁₀N₂},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {752},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43650},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-436501},
  pages     = {3},
  year      = {2019},
  abstract  = {C₁₈H₁₀N₂, monoclinic, P2₁/c (no. 14), a=7.9297(9) {\AA}, b=11.4021(14) {\AA}, c=13.3572(15) {\AA}, β=105.363(8)°, V =1164.5(2) {\AA}³, Z =4, Rgt(F)=0.0325, wRref(F²)=0.0774, T =210(2) K.},
  language  = {en}
}
@misc{BuecheleChaoOstermannetal.2019,
  author    = {B{\"u}chele, Dominique and Chao, Madlen and Ostermann, Markus and Leenen, Matthias and Bald, Ilko},
  title     = {Multivariate chemometrics as a key tool for prediction of K and Fe in a diverse German agricultural soil-set using EDXRF},
  series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe},
  number    = {784},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-43998},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-439988},
  pages     = {11},
  year      = {2019},
  abstract  = {Within the framework of precision agriculture, the determination of various soil properties is moving into focus, especially the demand for sensors suitable for in-situ measurements. Energy-dispersive X-ray fluorescence (EDXRF) can be a powerful tool for this purpose. In this study a huge diverse soil set (n = 598) from 12 different study sites in Germany was analysed with EDXRF. First, a principal component analysis (PCA) was performed to identify possible similarities among the sample set. Clustering was observed within the four texture classes clay, loam, silt and sand, as clay samples contain high and sandy soils low iron mass fractions. Furthermore, the potential of uni- and multivariate data evaluation with partial least squares regression (PLSR) was assessed for accurate determination of nutrients in German agricultural samples using two calibration sample sets. Potassium and iron were chosen for testing the performance of both models. Prediction of these nutrients in 598 German soil samples with EDXRF was more accurate using PLSR which is confirmed by a better overall averaged deviation and PLSR should therefore be preferred.},
  language  = {en}
}
@misc{MachatschekSchoeneRaschdorfetal.2019,
  author    = {Machatschek, Rainhard Gabriel and Sch{\"o}ne, Anne-Christin and Raschdorf, Elisa and Ihlenburg, Ramona and Schulz, Burkhard and Lendlein, Andreas},
  title     = {Interfacial properties of morpholine-2,5-dione-based oligodepsipeptides and multiblock copolymers},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1106},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46975},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469755},
  pages     = {170 -- 180},
  year      = {2019},
  abstract  = {Oligodepsipeptides (ODPs) with alternating amide and ester bonds prepared by ring-opening polymerization of morpholine-2,5-dione derivatives are promising matrices for drug delivery systems and building blocks for multifunctional biomaterials. Here, we elucidate the behavior of three telechelic ODPs and one multiblock copolymer containing ODP blocks at the air-water interface. Surprisingly, whereas the oligomers and multiblock copolymers crystallize in bulk, no crystallization is observed at the air-water interface. Furthermore, polarization modulation infrared reflection absorption spectroscopy is used to elucidate hydrogen bonding and secondary structures in ODP monolayers. The results will direct the development of the next ODP-based biomaterial generation with tailored properties for highly sophisticated applications.},
  language  = {en}
}
@misc{BreternitzLehmannBarnettetal.2019,
  author    = {Breternitz, Joachim and Lehmann, Frederike and Barnett, Sarah A. and Nowell, Harriott and Schorr, Susan},
  title     = {Role of the Iodide-methylammonium interaction in the ferroelectricity of CH3NH3PbI3},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-51822},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-518227},
  pages     = {7},
  year      = {2019},
  abstract  = {Excellent conversion efficiencies of over 20\% and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH3NH3PbI3 being an archetypal compound. The question why CH3NH3PbI3 has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non-centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long-range level. Although the molecular cation CH3NH3+ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.},
  language  = {en}
}
@misc{JiangMansfeldKratzetal.2019,
  author    = {Jiang, Yi and Mansfeld, Ulrich and Kratz, Karl and Lendlein, Andreas},
  title     = {Programmable microscale stiffness pattern of flat polymeric substrates by temperature-memory technology},
  series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  volume    = {9},
  journal   = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe},
  number    = {1},
  issn      = {1866-8372},
  doi       = {10.25932/publishup-46974},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469745},
  pages     = {181 -- 188},
  year      = {2019},
  abstract  = {Temperature-memory technology was utilized to generate flat substrates with a programmable stiffness pattern from cross-linked poly(ethylene-co-vinyl acetate) substrates with cylindrical microstructures. Programmed substrates were obtained by vertical compression at temperatures in the range from 60 to 100 degrees C and subsequent cooling, whereby a flat substrate was achieved by compression at 72 degrees C, as documented by scanning electron microscopy and atomic force microscopy (AFM). AFM nanoindentation experiments revealed that all programmed substrates exhibited the targeted stiffness pattern. The presented technology for generating polymeric substrates with programmable stiffness pattern should be attractive for applications such as touchpads. optical storage, or cell instructive substrates.},
  language  = {en}
}