@misc{SchoenemannKocAldredetal.2019, author = {Sch{\"o}nemann, Eric and Koc, Julian and Aldred, Nick and Clare, Anthony S. and Laschewsky, Andr{\´e} and Rosenhahn, Axel and Wischerhoff, Erik}, title = {Synthesis of novel sulfobetaine polymers with differing dipole orientations in their side chains, and their effects on the antifouling properties}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1}, issn = {1866-8372}, doi = {10.25932/publishup-52482}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-524820}, pages = {9}, year = {2019}, abstract = {The impact of the orientation of zwitterionic groups, with respect to the polymer backbone, on the antifouling performance of thin hydrogel films made of polyzwitterions is explored. In an extension of the recent discussion about differences in the behavior of polymeric phosphatidylcholines and choline phosphates, a quasi-isomeric set of three poly(sulfobetaine methacrylate)s is designed for this purpose. The design is based on the established monomer 3-[N-2-(methacryloyloxy)ethyl-N,N-dimethyl]ammonio-propane-1-sulfonate and two novel sulfobetaine methacrylates, in which the positions of the cationic and the ionic groups relative to the polymerizable group, and thus also to the polymer backbone, are altered. The effect of the varied segmental dipole orientation on their water solubility, wetting behavior by water, and fouling resistance is compared. As model systems, the adsorption of the model proteins bovine serum albumin (BSA), fibrinogen, and lysozyme onto films of the various polyzwitterion surfaces is studied, as well as the settlement of a diatom (Navicula perminuta) and barnacle cyprids (Balanus improvisus) as representatives of typical marine fouling communities. The results demonstrate the important role of the zwitterionic group's orientation on the polymer behavior and fouling resistance}, language = {en} } @misc{SchoenemannLaschewskyRosenhahn2018, author = {Sch{\"o}nemann, Eric and Laschewsky, Andr{\´e} and Rosenhahn, Axel}, title = {Exploring the long-term hydrolytic behavior of zwitterionic polymethacrylates and polymethacrylamides}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1091}, issn = {1866-8372}, doi = {10.25932/publishup-47305}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-473052}, pages = {25}, year = {2018}, abstract = {The hydrolytic stability of polymers to be used for coatings in aqueous environments, for example, to confer anti-fouling properties, is crucial. However, long-term exposure studies on such polymers are virtually missing. In this context, we synthesized a set of nine polymers that are typically used for low-fouling coatings, comprising the well-established poly(oligoethylene glycol methylether methacrylate), poly(3-(N-2-methacryloylethyl-N,N-dimethyl) ammoniopropanesulfonate) ("sulfobetaine methacrylate"), and poly(3-(N-3-methacryamidopropyl-N,N-dimethyl)ammoniopropanesulfonate) ("sulfobetaine methacrylamide") as well as a series of hitherto rarely studied polysulfabetaines, which had been suggested to be particularly hydrolysis-stable. Hydrolysis resistance upon extended storage in aqueous solution is followed by ¹H NMR at ambient temperature in various pH regimes. Whereas the monomers suffered slow (in PBS) to very fast hydrolysis (in 1 M NaOH), the polymers, including the polymethacrylates, proved to be highly stable. No degradation of the carboxyl ester or amide was observed after one year in PBS, 1 M HCl, or in sodium carbonate buffer of pH 10. This demonstrates their basic suitability for anti-fouling applications. Poly(sulfobetaine methacrylamide) proved even to be stable for one year in 1 M NaOH without any signs of degradation. The stability is ascribed to a steric shielding effect. The hemisulfate group in the polysulfabetaines, however, was found to be partially labile.}, language = {en} } @misc{Laschewsky2014, author = {Laschewsky, Andr{\´e}}, title = {Structures and synthesis of zwitterionic polymers}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {1043}, issn = {1866-8372}, doi = {10.25932/publishup-47616}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-476167}, pages = {60}, year = {2014}, abstract = {The structures and synthesis of polyzwitterions ("polybetaines") are reviewed, emphasizing the literature of the past decade. Particular attention is given to the general challenges faced, and to successful strategies to obtain polymers with a true balance of permanent cationic and anionic groups, thus resulting in an overall zero charge. Also, the progress due to applying new methodologies from general polymer synthesis, such as controlled polymerization methods or the use of "click" chemical reactions is presented. Furthermore, the emerging topic of responsive ("smart") polyzwitterions is addressed. The considerations and critical discussions are illustrated by typical examples.}, language = {en} } @misc{SchoenemannLaschewskyWischerhoffetal.2019, author = {Sch{\"o}nemann, Eric and Laschewsky, Andr{\´e} and Wischerhoff, Erik and Koc, Julian and Rosenhahn, Axel}, title = {Surface modification by polyzwitterions of the sulfabetaine-type, and their resistance to biofouling}, series = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam : Mathematisch-Naturwissenschaftliche Reihe}, number = {919}, issn = {1866-8372}, doi = {10.25932/publishup-44200}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-442007}, pages = {35}, year = {2019}, abstract = {Films of zwitterionic polymers are increasingly explored for conferring fouling resistance to materials. Yet, the structural diversity of polyzwitterions is rather limited so far, and clear structure-property relationships are missing. Therefore, we synthesized a series of new polyzwitterions combining ammonium and sulfate groups in their betaine moieties, so-called poly(sulfabetaine)s. Their chemical structures were varied systematically, the monomers carrying methacrylate, methacrylamide, or styrene moieties as polymerizable groups. High molar mass homopolymers were obtained by free radical polymerization. Although their solubilities in most solvents were very low, brine and lower fluorinated alcohols were effective solvents in most cases. A set of sulfabetaine copolymers containing about 1 mol \% (based on the repeat units) of reactive benzophenone methacrylate was prepared, spin-coated onto solid substrates, and photo-cured. The resistance of these films against the nonspecific adsorption by two model proteins (bovine serum albumin—BSA, fibrinogen) was explored, and directly compared with a set of references. The various polyzwitterions reduced protein adsorption strongly compared to films of poly(n-butyl methacrylate) that were used as a negative control. The poly(sulfabetaine)s showed generally even somewhat higher anti-fouling activity than their poly(sulfobetaine) analogues, though detailed efficacies depended on the individual polymer-protein pairs. Best samples approach the excellent performance of a poly(oligo(ethylene oxide) methacrylate) reference.}, language = {en} } @misc{NiebuurPuchmayrHeroldetal.2018, author = {Niebuur, Bart-Jan and Puchmayr, Jonas and Herold, Christian and Kreuzer, Lucas P. and Hildebrand, Viet and M{\"u}ller-Buschbaum, Peter and Laschewsky, Andr{\´e} and Papadakis, Christine M.}, title = {Polysulfobetaines in aqueous solution and in thin film geometry}, series = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe}, journal = {Postprints der Universit{\"a}t Potsdam Mathematisch-Naturwissenschaftliche Reihe}, number = {713}, issn = {1866-8372}, doi = {10.25932/publishup-42736}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-427363}, pages = {11}, year = {2018}, abstract = {Polysulfobetaines in aqueous solution show upper critical solution temperature (UCST) behavior. We investigate here the representative of this class of materials, poly (N,N-dimethyl-N-(3-methacrylamidopropyl) ammonio propane sulfonate) (PSPP), with respect to: (i) the dynamics in aqueous solution above the cloud point as function of NaBr concentration; and (ii) the swelling behavior of thin films in water vapor as function of the initial film thickness. For PSPP solutions with a concentration of 5 wt.\%, the temperature dependence of the intensity autocorrelation functions is measured with dynamic light scattering as function of molar mass and NaBr concentration (0-8 mM). We found a scaling of behavior for the scattered intensity and dynamic correlation length. The resulting spinodal temperatures showed a maximum at a certain (small) NaBr concentration, which is similar to the behavior of the cloud points measured previously by turbidimetry. The critical exponent of susceptibility depends on NaBr concentration, with a minimum value where the spinodal temperature is maximum and a trend towards the mean-field value of unity with increasing NaBr concentration. In contrast, the critical exponent of the correlation length does not depend on NaBr concentration and is lower than the value of 0.5 predicted by mean-field theory. For PSPP thin films, the swelling behavior was found to depend on film thickness. A film thickness of about 100 nm turns out to be the optimum thickness needed to obtain fast hydration with H 2 O.}, language = {en} } @misc{EnzenbergLaschewskyBoeffeletal.2017, author = {Enzenberg, Anne and Laschewsky, Andr{\´e} and Boeffel, Christine and Wischerhoff, Erik}, title = {Influence of the near molecular vicinity on the temperature regulated fluorescence response of poly(N-vinylcaprolactam)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-400634}, pages = {21}, year = {2017}, abstract = {A series of new fluorescent dye bearing monomers, including glycomonomers, based on maleamide and maleic esteramide was synthesized. The dye monomers were incorporated by radical copolymerization into thermo-responsive poly(N-vinyl-caprolactam) that displays a lower critical solution temperature (LCST) in aqueous solution. The effects of the local molecular environment on the polymers' luminescence, in particular on the fluorescence intensity and the extent of solvatochromism, were investigated below as well as above the phase transition. By attaching substituents of varying size and polarity in the close vicinity of the fluorophore, and by varying the spacer groups connecting the dyes to the polymer backbone, we explored the underlying structure-property relationships, in order to establish rules for successful sensor designs, e.g., for molecular thermometers. Most importantly, spacer groups of sufficient length separating the fluorophore from the polymer backbone proved to be crucial for obtaining pronounced temperature regulated fluorescence responses.}, language = {en} } @misc{HildebrandLaschewskyWischerhoff2015, author = {Hildebrand, Viet and Laschewsky, Andr{\´e} and Wischerhoff, Erik}, title = {Modulating the solubility of zwitterionic poly((3- methacrylamidopropyl)ammonioalkane sulfonate)s in water and aqueous salt solutions via the spacer group separating the cationic and the anionic moieties}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-103040}, pages = {731 -- 740}, year = {2015}, abstract = {Complementary to the well-established zwitterionic monomer 3-((3-methacrylamidopropyl)dimethylammonio) propane-1-sulfonate (SPP), the closely related monomers 2-hydroxy-3-((3-methacrylamidopropyl) dimethylammonio)propane-1-sulfonate (SHPP) and 4-((3-methacrylamidopropyl)dimethylammonio)-butane-1-sulfonate (SBP) were synthesised and polymerised by reversible addition-fragmentation chain transfer (RAFT) polymerisation, using a fluorophore labeled RAFT agent. The polyzwitterions of systematically varied molar masses were characterised with respect to their solubility in water and aqueous salt solutions. Both poly(sulfobetaine)s show thermoresponsive behaviour in water, exhibiting phase separation at low temperatures and upper critical solution temperatures (UCST). For both polySHPP and polySBP, cloud points depend notably on the molar mass, and are much higher in D2O than in H2O. Also, the cloud points are effectively modulated by the addition of salts. The individual effects can be in parts correlated to the Hofmeister series for the anions studied. Still, they depend in a complex way on the concentration and the nature of the added electrolytes, on the one hand, and on the detailed nature of the spacer group separating the anionic and the cationic charges of the betaine moiety, on the other hand. As anticipated, the cloud points of polySBP are much higher than the ones of the analogous polySPP of identical molar mass. Surprisingly, the cloud points of polySHPP are also somewhat higher than the ones of their polySPP analogues, despite the additional hydrophilic hydroxyl group present in the spacer separating the ammonium and the sulfonate moieties. These findings point to a complicated interplay of the various hydrophilic components in polyzwitterions with respect to their overall hydrophilicity. Thus, the spacer group in the betaine moiety proves to be an effective additional molecular design parameter, apparently small variations of which strongly influence the phase behaviour of the polyzwitterions in specific aqueous environments.}, language = {en} } @misc{HildebrandLaschewskyPaechetal.2016, author = {Hildebrand, Viet and Laschewsky, Andr{\´e} and P{\"a}ch, Michael and M{\"u}ller-Buschbaum, Peter and Papadakis, Christine M.}, title = {Effect of the zwitterion structure on the thermo-responsive behaviour of poly(sulfobetaine methacrylates)}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-102028}, pages = {13}, year = {2016}, abstract = {A series of new sulfobetaine methacrylates, including nitrogen-containing saturated heterocycles, was synthesised by systematically varying the substituents of the zwitterionic group. Radical polymerisation via the RAFT (reversible addition-fragmentation chain transfer) method in trifluoroethanol proceeded smoothly and was well controlled, yielding polymers with predictable molar masses. Molar mass analysis and control of the end-group fidelity were facilitated by end-group labeling with a fluorescent dye. The polymers showed distinct thermo-responsive behaviour of the UCST (upper critical solution temperature) type in an aqueous solution, which could not be simply correlated to their molecular structure via an incremental analysis of the hydrophilic and hydrophobic elements incorporated within them. Increasing the spacer length separating the ammonium and the sulfonate groups of the zwitterion moiety from three to four carbons increased the phase transition temperatures markedly, whereas increasing the length of the spacer separating the ammonium group and the carboxylate ester group on the backbone from two to three carbons provoked the opposite effect. Moreover, the phase transition temperatures of the analogous polyzwitterions decreased in the order dimethylammonio > morpholinio > piperidinio alkanesulfonates. In addition to the basic effect of the polymers' precise molecular structure, the concentration and the molar mass dependence of the phase transition temperatures were studied. Furthermore, we investigated the influence of added low molar mass salts on the aqueous-phase behaviour for sodium chloride and sodium bromide as well as sodium and ammonium sulfate. The strong effects evolved in a complex way with the salt concentration. The strength of these effects depended on the nature of the anion added, increasing in the order sulfate < chloride < bromide, thus following the empirical Hofmeister series. In contrast, no significant differences were observed when changing the cation, i.e. when adding sodium or ammonium sulfate.}, language = {en} } @misc{CommingesFrascaSuetterlinetal.2014, author = {Comminges, Cl{\´e}ment and Frasca, Stefano and S{\"u}tterlin, Martin and Wischerhoff, Erik and Laschewsky, Andr{\´e} and Wollenberger, Ursula}, title = {Surface modification with thermoresponsive polymer brushes for a switchable electrochemical sensor}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-99471}, year = {2014}, abstract = {Elaboration of switchable surfaces represents an interesting way for the development of a new generation of electrochemical sensors. In this paper, a method for growing thermoresponsive polymer brushes from a gold surface pre-modified with polyethyleneimine (PEI), subsequent layer-by-layer polyelectrolyte assembly and adsorption of a charged macroinitiator is described. We propose an easy method for monitoring the coil-to-globule phase transition of the polymer brush using an electrochemical quartz crystal microbalance with dissipation (E-QCM-D). The surface of these polymer modified electrodes shows reversible switching from the swollen to the collapsed state with temperature. As demonstrated from E-QCM-D measurements using an original signal processing method, the switch is operating in three reversible steps related to different interfacial viscosities. Moreover, it is shown that the one electron oxidation of ferrocene carboxylic acid is dramatically affected by the change from the swollen to the collapsed state of the polymer brush, showing a spectacular 86\% decrease of the charge transfer resistance between the two states.}, language = {en} } @misc{InalKoelschChiappisietal.2013, author = {Inal, Sahika and K{\"o}lsch, Jonas D. and Chiappisi, Leonardo and Janietz, Dietmar and Gradzielski, Michael and Laschewsky, Andr{\´e} and Neher, Dieter}, title = {Structure-related differences in the temperature-regulated fluorescence response of LCST type polymers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95379}, pages = {6603 -- 6612}, year = {2013}, abstract = {We demonstrate new fluorophore-labelled materials based on acrylamide and on oligo(ethylene glycol) (OEG) bearing thermoresponsive polymers for sensing purposes and investigate their thermally induced solubility transitions. It is found that the emission properties of the polarity-sensitive (solvatochromic) naphthalimide derivative attached to three different thermoresponsive polymers are highly specific to the exact chemical structure of the macromolecule. While the dye emits very weakly below the LCST when incorporated into poly(N-isopropylacrylamide) (pNIPAm) or into a polyacrylate backbone bearing only short OEG side chains, it is strongly emissive in polymethacrylates with longer OEG side chains. Heating of the aqueous solutions above their cloud point provokes an abrupt increase of the fluorescence intensity of the labelled pNIPAm, whereas the emission properties of the dye are rather unaffected as OEG-based polyacrylates and methacrylates undergo phase transition. Correlated with laser light scattering studies, these findings are ascribed to the different degrees of pre-aggregation of the chains at low temperatures and to the extent of dehydration that the phase transition evokes. It is concluded that although the temperature-triggered changes in the macroscopic absorption characteristics, related to large-scale alterations of the polymer chain conformation and aggregation, are well detectable and similar for these LCST-type polymers, the micro-environment provided to the dye within each polymer network differs substantially. Considering sensing applications, this finding is of great importance since the temperature-regulated fluorescence response of the polymer depends more on the macromolecular architecture than the type of reporter fluorophore.}, language = {en} } @misc{InalKoelschSellrieetal.2013, author = {Inal, Sahika and K{\"o}lsch, Jonas D. and Sellrie, Frank and Schenk, J{\"o}rg A. and Wischerhoff, Erik and Laschewsky, Andr{\´e} and Neher, Dieter}, title = {A water soluble fluorescent polymer as a dual colour sensor for temperature and a specific protein}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-95336}, pages = {6373 -- 6381}, year = {2013}, abstract = {We present two thermoresponsive water soluble copolymers prepared via free radical statistical copolymerization of N-isopropylacrylamide (NIPAm) and of oligo(ethylene glycol) methacrylates (OEGMAs), respectively, with a solvatochromic 7-(diethylamino)-3-carboxy-coumarin (DEAC)- functionalized monomer. In aqueous solutions, the NIPAm-based copolymer exhibits characteristic changes in its fluorescence profile in response to a change in solution temperature as well as to the presence of a specific protein, namely an anti-DEAC antibody. This polymer emits only weakly at low temperatures, but exhibits a marked fluorescence enhancement accompanied by a change in its emission colour when heated above its cloud point. Such drastic changes in the fluorescence and absorbance spectra are observed also upon injection of the anti-DEAC antibody, attributed to the specific binding of the antibody to DEAC moieties. Importantly, protein binding occurs exclusively when the polymer is in the well hydrated state below the cloud point, enabling a temperature control on the molecular recognition event. On the other hand, heating of the polymer-antibody complexes releases a fraction of the bound antibody. In the presence of the DEAC-functionalized monomer in this mixture, the released antibody competitively binds to the monomer and the antibody-free chains of the polymer undergo a more effective collapse and inter-aggregation. In contrast, the emission properties of the OEGMA-based analogous copolymer are rather insensitive to the thermally induced phase transition or to antibody binding. These opposite behaviours underline the need for a carefully tailored molecular design of responsive polymers aimed at specific applications, such as biosensing.}, language = {en} } @misc{BiddleRickertLandoetal.1989, author = {Biddle, M. B. and Rickert, S. E. and Lando, J. B. and Laschewsky, Andr{\´e}}, title = {The use of the Langmuir-Blodgett technique to obtain ultra-thin polar films}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17185}, year = {1989}, abstract = {The piezoelectric and pyroelectric properties of oriented films possessing dipole moments are increasingly being used in pressure, acoustic, thermal and optical devices. The performance of these devices in many applications may be enhanced by thin-film technology.The developing Langmuir-Blodgett thin-film deposition technique offers the opportunity to obtain highly oriented and uniform organic-based films in the 10-5000 nm thickness range. Special techniques must be used, however, to assemble these molecules in such a way as to result in polar multilayer films. Several possible deposition techniques are investigated, with one resulting in a polar and pyroelectric film about 50 nm thick.}, language = {en} } @misc{TsukrukMischenkoKoeberleetal.1992, author = {Tsukruk, Vladimir and Mischenko, Nikolay and K{\"o}berle, Peter and Laschewsky, Andr{\´e}}, title = {The structural order of some novel ionic polymers; 2. : Models of molecular packing}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17256}, year = {1992}, abstract = {The molecular packing and spatial correlations of two isomeric zwitterionic polymethacrylates and one polyacrylate analog are studied by means of X-ray analysis and conformational calculations. The analysis of the correlation functions and density distribution profiles suggest a double-layered molecular packing which is discussed for the three polymers investigated, with respect to their different chemical structures. Whereas the zwitterionic polymethacrylates studied exhibit liquid-like short-range order, the polyacrylate analog exhibits an ordered double-layered superstructure.}, language = {en} } @misc{ElbertLaschewskyRingsdorf1985, author = {Elbert, R. and Laschewsky, Andr{\´e} and Ringsdorf, H.}, title = {Hydrophilic spacer groups in polymerizable lipids: formation of biomembrane models from bulk polymerized lipids}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17361}, year = {1985}, abstract = {A variety of polymerizable lipids containing a hydrophilic spacer group between the reactive group and the main amphiphilic structure have been synthesized. They were investigated in monolayers, liposomes, and multilayers. When the spacer concept was used, efficient decoupling of the motions of the polymeric chain and the amphiphilic side groups is achieved. Thus, the often found loss of the important fluid phases by polymerization is avoided. Polymeric monolayers of the spacer lipid, prepared either by polymerization in the monolayer or by spreading of prepolymerized lipid, exhibit nearly identical surface pressure-area diagrams. Most distinctly, the successful decoupling of the motions of the polymer main chain and the membrane forming amphiphilic side groups is demonstrated by the self-organization of bulk polymerized spacer lipids to polymeric liposomes. In addition, spacer lipids are able to build polymeric Langmuir-Blodgett multilayers. The decoupling of the polymer main chain and the membrane-forming amphiphilic side groups enables the deposition of already polymeric monolayers onto supports to form defined multilayers. If, alternatively, monomeric monolayers are deposited and polymerized on the support, defects in the layers due to structural changes during the polymerization are avoided by the flexible spacer group.}, language = {en} } @misc{LupoPrassScheunemannetal.1988, author = {Lupo, Donald and Prass, Werner and Scheunemann, Ude and Laschewsky, Andr{\´e} and Ringsdorf, Helmut and Ledoux, Isabelle}, title = {Second-harmonic generation in Langmuir-Blodgett monolayers of stilbazium salt and phenylhydrazone dyes}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17401}, year = {1988}, abstract = {Contents: 1. INTRODUCTION 2. SYNTHESIS OF THE COMPOUNDS 3. PREPARATION AND CHARACTERIZATION OF MONOLAYERS A. Monolayer Isotherms B. Langmuir-Blodgett Monolayer Films 4. EXPERIMENTAL SETUP FOR NONLINEAR MEASUREMENTS 5. NONLINEAR OPTICAL PROPERTIES 6. DISCUSSION 7. CONCLUSION}, language = {en} } @misc{RozanskiKremerKoeberleetal.1995, author = {Rozanski, Stanislaw A. and Kremer, Friedrich and K{\"o}berle, Peter and Laschewsky, Andr{\´e}}, title = {Relaxation and charge transport in mixtures of zwitterionic polymers and inorganic salts}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17438}, year = {1995}, abstract = {Dielectric spectroscopy is employed to analyze the molecular dynamics and the charge transport in mixtures of zwitterionic polymers of the type poly{3 [N(-methacryloyloxyalkyl)] N, [N-dimethylammonio propanesulfonate] with sodium iodide in the frequency range of 10²Hz-10(up)7 Hz and in the temperature range of 110 K-400 K. The amount of inorganic salt added varies from 0-200 mol-\% relative to the number of zwitterionic groups present in the polymer, contributing strongly to the conductivity. One relaxation process is observed whose relaxation rate depends strongly on the length of the aliphatic spacer between the polymethacrylate main chain and the zwitterionic group. Exhibiting an Arrhenius-like temperature depence with activation energy EA = 47 KJ/mol, this relaxation process is assigned to fluctuation of the quaternary ammonium groups in the side chains. At higher temperatures, the dielectric properties and the conductivity are primarily dominated by the mobile inorganic ions: conductivity strongly depends on the salt concentration, showing a pronounced electrode polarization effect. The frequency and salt concentration, dependences of the conductivity can be quantitatively described as hopping of charge carriers being subject to spatially randomly varying energy barriers. For the low-frequency regime and for the critical frequency marking the onset of the conductivity's dispersion, the Barton-Nakajima-Namikawa (BNN) relationship is fulfilled.}, language = {en} } @misc{LaschewskySchulzHanke1993, author = {Laschewsky, Andr{\´e} and Schulz-Hanke, Wolfgang}, title = {Ring-opening metathesis polymerization of amphiphilic norbornenes functionalized with non-linear optical (NLO) chromophores}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-26917}, year = {1993}, abstract = {Contents: Potential of amphiphilic NLO polymers Ring-opening metathesis polymerization (ROMP) Properties of the polymers Monolayer properties Experimental part - Methods - Materials - Analytical data - General polymerization procedure Conclusions}, language = {en} } @misc{AntonLaschewsky1993, author = {Anton, Peter and Laschewsky, Andr{\´e}}, title = {Zwitterionic polysoaps with reduced density of surfactant side groups}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17301}, year = {1993}, abstract = {Several zwitterionic polymers were prepared by radical homopolymerization of surfactant monomers which bear diallyl, diene or vinylcyclopropane moieties. These polymer systems were complemented by alternating copolymers of appropriate zwitterionic vinyl compounds. Thus, polymers with reduced (as compared with simple vinylic homopolymers, or statistical copolymers) and well defined density of surfactant side groups are obtained. The solubilities found for these polymers are dominated by polymer geometry rather than by the balance of hydrophilic and hydrophobic fragments, thus corroborating a main-chain spacer model proposed recently. All water-soluble polymers exhibit characteristic features of classical polysoaps, as shown by surface tension measurements and by solubilization of hydrophobic dyes. In contrast, the water-insoluble copolymers are capable to form stable monolayers at the air-water interface.}, language = {en} } @misc{AntonKoeberleLaschewsky1993, author = {Anton, Peter and K{\"o}berle, Peter and Laschewsky, Andr{\´e}}, title = {Recent developments in the field of micellar polymers}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17263}, year = {1993}, abstract = {This article describes recent achievements in the field of micellar polymers, or polysoaps. Taking advantage of zwitterionic model polymers, systematic variations of the molecular architecture have provided an improved understanding of the relationship between the molecular structure of the polymers and their key properties such as surface activity and solubilization capacity. Useful rules are established, which take into account much of the previous data in the literature.}, language = {en} } @misc{KoeberleLaschewskyTsukruk1992, author = {K{\"o}berle, Peter and Laschewsky, Andr{\´e} and Tsukruk, Vladimir}, title = {The structural order of some novel ionic polymers : 1. X-ray scattering studies}, url = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus-17247}, year = {1992}, abstract = {A set of novel zwitterionic side-chain polyacrylates and polymethacrylates is studied by X-ray scattering. The structural order both in the short-range and long-range scale is investigated. The influence of the polymer backbone, of different locations of the ionic groups in isomeric polymers, of bound water and of added inorganic salts on the bulk structures is studied, and the observed rearrangements are analysed.}, language = {en} }