@phdthesis{LozadaGobilard2019,
  author    = {Lozada Gobilard, Sissi Donna},
  title     = {From genes to communities: Assessing plant diversity and connectivity in kettle holes as metaecosystems in agricultural landscapes},
  doi       = {10.25932/publishup-43768},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-437684},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xiii, 147},
  year      = {2019},
  abstract  = {Species assembly from a regional pool into local metacommunities and how they colonize and coexist over time and space is essential to understand how communities response to their environment including abiotic and biotic factors. In highly disturbed landscapes, connectivity of isolated habitat patches is essential to maintain biodiversity and the entire ecosystem functioning. In northeast Germany, a high density of the small water bodies called kettle holes, are good systems to study metacommunities due to their condition as "aquatic islands" suitable for hygrophilous species that are surrounded by in unsuitable matrix of crop fields. The main objective of this thesis was to infer the main ecological processes shaping plant communities and their response to the environment, from biodiversity patterns and key life-history traits involved in connectivity using ecological and genetic approaches; and to provide first insights of the role of kettle holes harboring wild-bee species as important mobile linkers connecting plant communities in this insular system. t a community level, I compared plant diversity patterns and trait composition in ephemeral vs. permanent kettle holes). My results showed that types of kettle holes act as environmental filers shaping plant diversity, community-composition and trait-distribution, suggesting species sorting and niche processes in both types of kettle holes. At a population level, I further analyzed the role of dispersal and reproductive strategies of four selected species occurring in permanent kettle holes. Using microsatellites, I found that breeding system (degree of clonality), is the main factor shaping genetic diversity and genetic divergence. Although, higher gene flow and lower genetic differentiation among populations in wind vs. insect pollinated species was also found, suggesting that dispersal mechanisms played a role related to gene flow and connectivity. For most flowering plants, pollinators play an important role connecting communities. Therefore, as a first insight of the potential mobile linkers of these plant communities, I investigated the diversity wild-bees occurring in these kettle holes. My main results showed that local habitat quality (flower resources) had a positive effect on bee diversity, while habitat heterogeneity (number of natural landscape elements surrounding kettle holes 100-300m), was negatively correlated. This thesis covers from genetic flow at individual and population level to plant community assembly. My results showed how patterns of biodiversity, dispersal and reproduction strategies in plant population and communities can be used to infer ecological processes. In addition, I showed the importance of life-history traits and the relationship between species and their abiotic and biotic interactions. Furthermore, I included a different level of mobile linkers (pollinators) for a better understanding of another level of the system. This integration is essential to understand how communities respond to their surrounding environment and how disturbances such as agriculture, land-use and climate change might affect them. I highlight the need to integrate many scientific areas covering from genes to ecosystems at different spatiotemporal scales for a better understanding, management and conservation of our ecosystems.},
  language  = {en}
}
@phdthesis{AppiahDwomoh2019,
  author    = {Appiah-Dwomoh, Edem Korkor},
  title     = {Postural control and back pain in adolescent athletes},
  doi       = {10.25932/publishup-44269},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-442692},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 77, X},
  year      = {2019},
  abstract  = {Back pain is a problem in adolescent athletes affecting postural control which is an important requirement for physical and daily activities whether under static or dynamic conditions. One leg stance and star excursion balance postural control tests are effective in measuring static and dynamic postural control respectively. These tests have been used in individuals with back pain, athletes and non-athletes without first establishing their reliabilities. In addition to this, there is no published literature investigating dynamic posture in adolescent athletes with back pain using the star excursion balance test. Therefore, the aim of the thesis was to assess deficit in postural control in adolescent athletes with and without back pain using static (one leg stance test) and dynamic postural (SEBT) control tests. Adolescent athletes with and without back pain participated in the study. Static and dynamic postural control tests were performed using one leg stance and SEBT respectively. The reproducibility of both tests was established. Afterwards, it was determined whether there was an association between static and dynamic posture using the measure of displacement of the centre pressure and reach distance respectively. Finally, it was investigated whether there was a difference in postural control in adolescent athletes with and without back pain using the one leg stance test and the SEBT. Fair to excellent reliabilities was recorded for the static (one leg stance) and dynamic (star excursion balance) postural control tests in the subjects of interest. No association was found between variables of the static and dynamic tests for the adolescent athletes with and without back pain. Also, no statistically significant difference was obtained between adolescent athletics with and without back pain using the static and dynamic postural control test. One leg stance test and SEBT can be used as measures of postural control in adolescent athletes with and without back pain. Although static and dynamic postural control might be related, adolescent athletes with and without back pain might be using different mechanisms in controlling their static and dynamic posture. Consequently, static and dynamic postural control in adolescent athletes with back pain was not different from those without back pain. These outcome measures might not be challenging enough to detect deficit in postural control in our study group of interest.},
  language  = {en}
}
@phdthesis{StutterGarcia2019,
  author    = {Stutter Garcia, Ana},
  title     = {The use of grammatical knowledge in an additional language},
  doi       = {10.25932/publishup-46932},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-469326},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xviii, 340},
  year      = {2019},
  abstract  = {This thesis investigates whether multilingual speakers' use of grammatical constraints in an additional language (La) is affected by the native (L1) and non-native grammars (L2) of their linguistic repertoire. Previous studies have used untimed measures of grammatical performance to show that L1 and L2 grammars affect the initial stages of La acquisition. This thesis extends this work by examining whether speakers at intermediate levels of La proficiency, who demonstrate mature untimed/offline knowledge of the target La constraints, are differentially affected by their L1 and L2 knowledge when they comprehend sentences under processing pressure. With this purpose, several groups of La German speakers were tested on word order and agreement phenomena using online/timed measures of grammatical knowledge. Participants had mirror distributions of their prior languages and they were either L1English/L2Spanish speakers or L1Spanish/L2English speakers. Crucially, in half of the phenomena the target La constraint aligned with English but not with Spanish, while in the other half it aligned with Spanish but not with English. Results show that the L1 grammar plays a major role in the use of La constraints under processing pressure, as participants displayed increased sensitivity to La constraints when they aligned with their L1, and reduced sensitivity when they did not. Further, in specific phenomena in which the L2 and La constraints aligned, increased L2 proficiency resulted in an enhanced sensitivity to the La constraint. These findings suggest that both native and non-native grammars affect how speakers use La grammatical constraints under processing pressure. However, L1 and L2 grammars differentially influence on participants' performance: While L1 constraints seem to be reliably recruited to cope with the processing demands of real-time La use, proficiency in an L2 can enhance sensitivity to La constraints only in specific circumstances, namely when L2 and La constraints align.},
  language  = {en}
}
@phdthesis{Knoechel2019,
  author    = {Kn{\"o}chel, Jane},
  title     = {Model reduction of mechanism-based pharmacodynamic models and its link to classical drug effect models},
  doi       = {10.25932/publishup-44059},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-440598},
  school      = {Universit{\"a}t Potsdam},
  pages     = {vii, 147},
  year      = {2019},
  abstract  = {Continuous insight into biological processes has led to the development of large-scale, mechanistic systems biology models of pharmacologically relevant networks. While these models are typically designed to study the impact of diverse stimuli or perturbations on multiple system variables, the focus in pharmacological research is often on a specific input, e.g., the dose of a drug, and a specific output related to the drug effect or response in terms of some surrogate marker. To study a chosen input-output pair, the complexity of the interactions as well as the size of the models hinders easy access and understanding of the details of the input-output relationship. The objective of this thesis is the development of a mathematical approach, in specific a model reduction technique, that allows (i) to quantify the importance of the different state variables for a given input-output relationship, and (ii) to reduce the dynamics to its essential features -- allowing for a physiological interpretation of state variables as well as parameter estimation in the statistical analysis of clinical data. We develop a model reduction technique using a control theoretic setting by first defining a novel type of time-limited controllability and observability gramians for nonlinear systems. We then show the superiority of the time-limited generalised gramians for nonlinear systems in the context of balanced truncation for a benchmark system from control theory. The concept of time-limited controllability and observability gramians is subsequently used to introduce a state and time-dependent quantity called the input-response (ir) index that quantifies the importance of state variables for a given input-response relationship at a particular time. We subsequently link our approach to sensitivity analysis, thus, enabling for the first time the use of sensitivity coefficients for state space reduction. The sensitivity based ir-indices are given as a product of two sensitivity coefficients. This allows not only for a computational more efficient calculation but also for a clear distinction of the extent to which the input impacts a state variable and the extent to which a state variable impacts the output. The ir-indices give insight into the coordinated action of specific state variables for a chosen input-response relationship. Our developed model reduction technique results in reduced models that still allow for a mechanistic interpretation in terms of the quantities/state variables of the original system, which is a key requirement in the field of systems pharmacology and systems biology and distinguished the reduced models from so-called empirical drug effect models. The ir-indices are explicitly defined with respect to a reference trajectory and thereby dependent on the initial state (this is an important feature of the measure). This is demonstrated for an example from the field of systems pharmacology, showing that the reduced models are very informative in their ability to detect (genetic) deficiencies in certain physiological entities. Comparing our novel model reduction technique to the already existing techniques shows its superiority. The novel input-response index as a measure of the importance of state variables provides a powerful tool for understanding the complex dynamics of large-scale systems in the context of a specific drug-response relationship. Furthermore, the indices provide a means for a very efficient model order reduction and, thus, an important step towards translating insight from biological processes incorporated in detailed systems pharmacology models into the population analysis of clinical data.},
  language  = {en}
}
@phdthesis{Jantzen2019,
  author    = {Jantzen, Friederike},
  title     = {Genetic basis and adaptive significance of repeated scent loss in selfing Capsella species},
  doi       = {10.25932/publishup-43525},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-435253},
  school      = {Universit{\"a}t Potsdam},
  pages     = {124},
  year      = {2019},
  abstract  = {Floral scent is an important way for plants to communicate with insects, but scent emission has been lost or strongly reduced during the transition from pollinator-mediated outbreeding to selfing. The shift from outcrossing to selfing is not only accompanied by scent loss, but also by a reduction in other pollinator-attracting traits like petal size and can be observed multiple times among angiosperms. These changes are summarized by the term selfing syndrome and represent one of the most prominent examples of convergent evolution within the plant kingdom. In this work the genus Capsella was used as a model to study convergent evolution in two closely related selfers with separate transitions to self-fertilization. Compared to their outbreeding ancestor C. grandiflora, the emission of benzaldehyde as main compound of floral scent is lacking or strongly reduced in the selfing species C. rubella and C. orientalis. In C. rubella the loss of benzaldehyde was caused by mutations to cinnamate:CoA ligase CNL1, but the biochemical basis and evolutionary history of this loss remained unknown, together with the genetic basis of scent loss in C. orientalis. Here, a combination of plant transformations, in vitro enzyme assays, population genetics and quantitative genetics has been used to address these questions. The results indicate that CNL1 has been inactivated twice independently by point mutations in C. rubella, leading to a loss of benzaldehyde emission. Both inactivated haplotypes can be found around the Mediterranean Sea, indicating that they arose before the species´ geographical spread. This study confirmed CNL1 as a hotspot for mutations to eliminate benzaldehyde emission, as it has been suggested by previous studies. In contrast to these findings, CNL1 in C. orientalis remains active. To test whether similar mechanisms underlie the convergent evolution of scent loss in C. orientalis a QTL mapping approach was used and the results suggest that this closely related species followed a different evolutionary route to reduce floral scent, possibly reflecting that the convergent evolution of floral scent is driven by ecological rather than genetic factors. In parallel with studying the genetic basis of repeated scent loss a method for testing the adaptive value of individual selfing syndrome traits was established. The established method allows estimating outcrossing rates with a high throughput of samples and detects successfully insect-mediated outcrossing events, providing major advantages regarding time and effort compared to other approaches. It can be applied to correlate outcrossing rates with differences in individual traits by using quasi-isogenic lines as demonstrated here or with environmental or morphological parameters. Convergent evolution can not only be observed for scent loss in Capsella but also for the morphological evolution of petal size. Previous studies detected several QTLs underlying the petal size reduction in C. orientalis and C. rubella, some of them shared among both species. One shared QTL is PAQTL1 which might map to NUBBIN, a growth factor. To better understand the morphological evolution and genetic basis of petal size reduction, this QTL was studied. Mapping this QTL to a gene might identify another example for a hotspot gene, in this case for the convergent evolution of petal size.},
  language  = {en}
}
@phdthesis{Codeco2019,
  author    = {Codeco, Marta Sofia Ferreira},
  title     = {Constraining the hydrology at Minas da Panasqueira W-Sn-Cu deposit, Portugal},
  doi       = {10.25932/publishup-42975},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-429752},
  school      = {Universit{\"a}t Potsdam},
  pages     = {xxviii, 232},
  year      = {2019},
  abstract  = {This dissertation combines field and geochemical observations and analyses with numerical modeling to understand the formation of vein-hosted Sn-W ore in the Panasqueira deposit of Portugal, which is among the ten largest worldwide. The deposit is located above a granite body that is altered by magmatic-hydrothermal fluids in its upper part (greisen). These fluids are thought to be the source of metals, but that was still under debate. The goal of this study is to determine the composition and temperature of hydrothermal fluids at Panasqueira, and with that information to construct a numerical model of the hydrothermal system. The focus is on analysis of the minerals tourmaline and white mica, which formed during mineralization and are widespread throughout the deposit. Tourmaline occurs mainly in alteration zones around mineralized veins and is less abundant in the vein margins. White mica is more widespread. It is abundant in vein margins as well as alteration zones, and also occurs in the granite greisen. The laboratory work involved in-situ microanalysis of major- and trace elements in tourmaline and white mica, and boron-isotope analysis in both minerals by secondary ion mass spectrometry (SIMS). The boron-isotope composition of tourmaline and white mica suggests a magmatic source. Comparison of hydrothermally-altered and unaltered rocks from drill cores shows that the ore metals (W, Sn, Cu, and Zn) and As, F, Li, Rb, and Cs were introduced during the alteration. Most of these elements are also enriched in tourmaline and mica, which confirms their potential value as exploration guides to Sn-W ores elsewhere. The thermal evolution of the hydrothermal system was estimated by B-isotope exchange thermometry and the Ti-in-quartz method. Both methods yielded similar temperatures for the early hydrothermal phase: 430° to 460°C for B-isotopes and 503° ± 24°C for Ti-in-quartz. Mineral pairs from a late fault zone yield significantly lower median temperatures of 250°C. The combined results of thermometry with variations in chemical and B-isotope composition of tourmaline and mica suggest that a similar magmatic-hydrothermal fluid was active at all stages of mineralization. Mineralization in the late stage shows the same B-isotope composition as in the main stage despite a ca. 250°C cooling, which supports a multiple injection model of magmatic-hydrothermal fluids. Two-dimensional numerical simulations of convection in a multiphase NaCl hydrothermal system were conducted: (a) in order to test a new approach (lower dimensional elements) for flow through fractures and faults and (b) in order to identify conditions for horizontal fluid flow as observed in the flat-lying veins at Panasqueira. The results show that fluid flow over an intrusion (heat and fluid source) develops a horizontal component if there is sufficient fracture connectivity. Late, steep fault zones have been identified in the deposit area, which locally contain low-temperature Zn-Pb mineralization. The model results confirm that the presence of subvertical faults with enhanced permeability play a crucial role in the ascent of magmatic fluids to the surface and the recharge of meteoric waters. Finally, our model results suggest that recharge of meteoric fluids and mixing processes may be important at later stages, while flow of magmatic fluids dominate the early stages of the hydrothermal fluid circulation.},
  language  = {en}
}
@phdthesis{Kurpiers2019,
  author    = {Kurpiers, Jona},
  title     = {Probing the pathways of free charge generation and recombination in organic solar cells},
  doi       = {10.25932/publishup-42909},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-429099},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VI, 128, xxi},
  year      = {2019},
  abstract  = {Organic semiconductors are a promising class of materials. Their special properties are the particularly good absorption, low weight and easy processing into thin films. Therefore, intense research has been devoted to the realization of thin film organic solar cells (OPVs). Because of the low dielectric constant of organic semiconductors, primary excitations (excitons) are strongly bound and a type II heterojunction needs to be introduced to split these excitations into free charges. Therefore, most organic solar cells consist of at least an electron donor and electron acceptor material. For such donor acceptor systems mainly three states are relevant; the photoexcited exciton on the donor or acceptor material, the charge transfer state at the donor-acceptor interface and the charge separated state of a free electron and hole. The interplay between these states significantly determines the efficiency of organic solar cells. Due to the high absorption and the low charge carrier mobilities, the active layers are usually thin but also, exciton dissociation and free charge formation proceeds rapidely, which makes the study of carrier dynamics highly challenging. Therefore, the focus of this work was first to install new experimental setups for the investigation of the charge carrier dynamics in complete devices with superior sensitivity and time resolution and, second, to apply these methods to prototypical photovoltaic materials to address specific questions in the field of organic and hybrid photovoltaics. Regarding the first goal, a new setup combining transient absorption spectroscopy (TAS) and time delayed collection field (TDCF) was designed and installed in Potsdam. An important part of this work concerned the improvement of the electronic components with respect to time resolution and sensitivity. To this end, a highly sensitive amplifier for driving and detecting the device response in TDCF was developed. This system was then applied to selected organic and hybrid model systems with a particular focus on the understanding of the loss mechanisms that limit the fill factor and short circuit current of organic solar cells. The first model system was a hybrid photovoltaic material comprising inorganic quantum dots decorated with organic ligands. Measurements with TDCF revealed fast free carrier recombination, in part assisted by traps, while bias-assisted charge extraction measurements showed high mobility. The measured parameters then served as input for a successful description of the device performance with an analytical model. With a further improvement of the instrumentation, a second topic was the detailed analysis of non-geminate recombination in a disordered polymer:fullerene blend where an important question was the effect of disorder on the carrier dynamics. The measurements revealed that early time highly mobile charges undergo fast non-geminate recombination at the contacts, causing an apparent field dependence of free charge generation in TDCF experiments if not conducted properly. On the other hand, recombination the later time scale was determined by dispersive recombination in the bulk of the active layer, showing the characteristics of carrier dynamics in an exponential density of state distribution. Importantly, the comparison with steady state recombination data suggested a very weak impact of non-thermalized carriers on the recombination properties of the solar cells under application relevant illumination conditions. Finally, temperature and field dependent studies of free charge generation were performed on three donor-acceptor combinations, with two donor polymers of the same material family blended with two different fullerene acceptor molecules. These particular material combinations were chosen to analyze the influence of the energetic and morphology of the blend on the efficiency of charge generation. To this end, activation energies for photocurrent generation were accurately determined for a wide range of excitation energies. The results prove that the formation of free charge is via thermalized charge transfer states and does not involve hot exciton splitting. Surprisingly, activation energies were of the order of thermal energy at room temperature. This led to the important conclusion that organic solar cells perform well not because of predominate high energy pathways but because the thermalized CT states are weakly bound. In addition, a model is introduced to interconnect the dissociation efficiency of the charge transfer state with its recombination observable with photoluminescence, which rules out a previously proposed two-pool model for free charge formation and recombination. Finally, based on the results, proposals for the further development of organic solar cells are formulated.},
  language  = {en}
}
@phdthesis{Korges2019,
  author    = {Korges, Maximilian},
  title     = {Constraining the hydrology of intrusion-related ore deposits with fluid inclusions and numerical modeling},
  doi       = {10.25932/publishup-43484},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-434843},
  school      = {Universit{\"a}t Potsdam},
  pages     = {VIII, 99},
  year      = {2019},
  abstract  = {Magmatic-hydrothermal fluids are responsible for numerous mineralization types, including porphyry copper and granite related tin-tungsten (Sn-W) deposits. Ore formation is dependent on various factors, including, the pressure and temperature regime of the intrusions, the chemical composition of the magma and hydrothermal fluids, and fluid rock interaction during the ascent. Fluid inclusions have potential to provide direct information on the temperature, salinity, pressure and chemical composition of fluids responsible for ore formation. Numerical modeling allows the parametrization of pluton features that cannot be analyzed directly via geological observations. Microthermometry of fluid inclusions from the Zinnwald Sn-W deposit, Erzgebirge, Germany / Czech Republic, provide evidence that the greisen mineralization is associated with a low salinity (2-10 wt.\% NaCl eq.) fluid with homogenization temperatures between 350°C and 400°C. Quartzes from numerous veins are host to inclusions with the same temperatures and salinities, whereas cassiterite- and wolframite-hosted assemblages with slightly lower temperatures (around 350°C) and higher salinities (ca. 15 wt. NaCl eq.). Further, rare quartz samples contained boiling assemblages consisting of coexisting brine and vapor phases. The formation of ore minerals within the greisen is driven by invasive fluid-rock interaction, resulting in the loss of complexing agents (Cl-) leading to precipitation of cassiterite. The fluid inclusion record in the veins suggests boiling as the main reason for cassiterite and wolframite mineralization. Ore and coexisting gangue minerals hosted different types of fluid inclusions where the beginning boiling processes are solely preserved by the ore minerals emphasizing the importance of microthermometry in ore minerals. Further, the study indicates that boiling as a precipitation mechanism can only occur in mineralization related to shallow intrusions whereas deeper plutons prevent the fluid from boiling and can therefore form tungsten mineralization in the distal regions. The tin mineralization in the H{\"a}mmerlein deposit, Erzgebirge, Germany, occurs within a skarn horizon and the underlying schist. Cassiterite within the skarn contains highly saline (30-50 wt\% NaCl eq.) fluid inclusions, with homogenization temperatures up to 500°C, whereas cassiterites from the schist and additional greisen samples contain inclusions of lower salinity (~5 wt\% NaCl eq.) and temperature (between 350 and 400°C). Inclusions in the gangue minerals (quartz, fluorite) preserve homogenization temperatures below 350°C and sphalerite showed the lowest homogenization temperatures (ca. 200°C) whereby all minerals (cassiterite from schist and greisen, gangue minerals and sphalerite) show similar salinity ranges (2-5 wt\% NaCl eq.). Similar trace element contents and linear trends in the chemistry of the inclusions suggest a common source fluid. The inclusion record in the H{\"a}mmerlein deposit documents an early exsolution of hot brines from the underlying granite which is responsible for the mineralization hosted by the skarn. Cassiterites in schist and greisen are mainly forming due to fluid-rock interaction at lower temperatures. The low temperature inclusions documented in the sphalerite mineralization as well as their generally low trace element composition in comparison to the other minerals suggests that their formation was induced by mixing with meteoric fluids. Numerical simulations of magma chambers and overlying copper distribution document the importance of incremental growth by sills. We analyzed the cooling behavior at variable injection intervals as well as sill thicknesses. The models suggest that magma accumulation requires volumetric injection rates of at least 4 x 10-4 km³/y. These injection rates are further needed to form a stable magmatic-hydrothermal fluid plume above the magma chamber to ensure a constant copper precipitation and enrichment within a confined location in order to form high-grade ore shells within a narrow geological timeframe between 50 and 100 kyrs as suggested for porphyry copper deposits. The highest copper enrichment can be found in regions with steep temperature gradients, typical of regions where the magmatic-hydrothermal fluid meets the cooler ambient fluids.},
  language  = {en}
}
@phdthesis{Willig2019,
  author    = {Willig, Lisa},
  title     = {Ultrafast magneto-optical studies of remagnetisation dynamics in transition metals},
  doi       = {10.25932/publishup-44194},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-441942},
  school      = {Universit{\"a}t Potsdam},
  pages     = {XIV, 113, XVII},
  year      = {2019},
  abstract  = {Ultrafast magnetisation dynamics have been investigated intensely for two decades. The recovery process after demagnetisation, however, was rarely studied experimentally and discussed in detail. The focus of this work lies on the investigation of the magnetisation on long timescales after laser excitation. It combines two ultrafast time resolved methods to study the relaxation of the magnetic and lattice system after excitation with a high fluence ultrashort laser pulse. The magnetic system is investigated by time resolved measurements of the magneto-optical Kerr effect. The experimental setup has been implemented in the scope of this work. The lattice dynamics were obtained with ultrafast X-ray diffraction. The combination of both techniques leads to a better understanding of the mechanisms involved in magnetisation recovery from a non-equilibrium condition. Three different groups of samples are investigated in this work: Thin Nickel layers capped with nonmagnetic materials, a continuous sample of the ordered L10 phase of Iron Platinum and a sample consisting of Iron Platinum nanoparticles embedded in a carbon matrix. The study of the remagnetisation reveals a general trend for all of the samples: The remagnetisation process can be described by two time dependences. A first exponential recovery that slows down with an increasing amount of energy absorbed in the system until an approximately linear time dependence is observed. This is followed by a second exponential recovery. In case of low fluence excitation, the first recovery is faster than the second. With increasing fluence the first recovery is slowed down and can be described as a linear function. If the pump-induced temperature increase in the sample is sufficiently high, a phase transition to a paramagnetic state is observed. In the remagnetisation process, the transition into the ferromagnetic state is characterised by a distinct transition between the linear and exponential recovery. From the combination of the transient lattice temperature Tp(t) obtained from ultrafast X-ray measurements and magnetisation M(t) gained from magneto-optical measurements we construct the transient magnetisation versus temperature relations M(Tp). If the lattice temperature remains below the Curie temperature the remagnetisation curve M(Tp) is linear and stays below the M(T) curve in equilibrium in the continuous transition metal layers. When the sample is heated above phase transition, the remagnetisation converges towards the static temperature dependence. For the granular Iron Platinum sample the M(Tp) curves for different fluences coincide, i.e. the remagnetisation follows a similar path irrespective of the initial laser-induced temperature jump.},
  language  = {en}
}
@phdthesis{Sarhan2019,
  author    = {Sarhan, Radwan Mohamed},
  title     = {Plasmon-driven photocatalytic reactions monitored by surface-enhanced Raman spectroscopy},
  doi       = {10.25932/publishup-43330},
  url       = {http://nbn-resolving.de/urn:nbn:de:kobv:517-opus4-433304},
  school      = {Universit{\"a}t Potsdam},
  year      = {2019},
  abstract  = {Plasmonic metal nanostructures can be tuned to efficiently interact with light, converting the photons into energetic charge carriers and heat. Therefore, the plasmonic nanoparticles such as gold and silver nanoparticles act as nano-reactors, where the molecules attached to their surfaces benefit from the enhanced electromagnetic field along with the generated energetic charge carriers and heat for possible chemical transformations. Hence, plasmonic chemistry presents metal nanoparticles as a unique playground for chemical reactions on the nanoscale remotely controlled by light. However, defining the elementary concepts behind these reactions represents the main challenge for understanding their mechanism in the context of the plasmonically assisted chemistry. Surface-enhanced Raman scattering (SERS) is a powerful technique employing the plasmon-enhanced electromagnetic field, which can be used for probing the vibrational modes of molecules adsorbed on plasmonic nanoparticles. In this cumulative dissertation, I use SERS to probe the dimerization reaction of 4-nitrothiophenol (4-NTP) as a model example of plasmonic chemistry. I first demonstrate that plasmonic nanostructures such as gold nanotriangles and nanoflowers have a high SERS efficiency, as evidenced by probing the vibrations of the rhodamine dye R6G and the 4-nitrothiophenol 4-NTP. The high signal enhancement enabled the measurements of SERS spectra with a short acquisition time, which allows monitoring the kinetics of chemical reactions in real time. To get insight into the reaction mechanism, several time-dependent SERS measurements of the 4-NTP have been performed under different laser and temperature conditions. Analysis of the results within a mechanistic framework has shown that the plasmonic heating significantly enhances the reaction rate, while the reaction is probably initiated by the energetic electrons. The reaction was shown to be intensity-dependent, where a certain light intensity is required to drive the reaction. Finally, first attempts to scale up the plasmonic catalysis have been performed showing the necessity to achieve the reaction threshold intensity. Meanwhile, the induced heat needs to quickly dissipate from the reaction substrate, since otherwise the reactants and the reaction platform melt. This study might open the way for further work seeking the possibilities to quickly dissipate the plasmonic heat generated during the reaction and therefore, scaling up the plasmonic catalysis.},
  language  = {en}
}